debian/changelog

   1 ifupdown2 (1.2.5-1) unstable; urgency=medium
   2
   3   * Fix: debian: install sysvinit script (closes: #918775)
   4   * Fix: debian: postinst: remove diversion after upgrade from stretch
   5          (closes: #919443)
   6
   7  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 16 Jan 2019 23:42:42 +0800
   8
   9 ifupdown2 (1.2.4-1) unstable; urgency=medium
  10
  11   * Fix: statemanager directory path customization via ifupdown2.conf
  12          (closes: #918832)
  13
  14  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 11 Jan 2019 23:42:42 +0000
  15
  16 ifupdown2 (1.2.3-1) unstable; urgency=medium
  17
  18   * Fix: log: use stderr if syslog initialization fails (closes: #917534)
  19
  20  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 30 Dec 2018 23:42:42 +0700
  21
  22 ifupdown2 (1.2.2-1) unstable; urgency=medium
  23
  24   * New: add support for B.A.T.M.A.N. adv. attributes
  25   * New: support for new iproute2 format (bridge vlan show)
  26   * New: add new checks for existing device with vxlan attributes
  27   * Fix: pypi install: local addons modules should be loaded first
  28   * Fix: link-down yes on vrf slaves
  29   * Fix: nlmanager: use strerror to format kernel error
  30   * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
  31   * Fix: man: remove non-implemented -m option (closes: #905572)
  32
  33  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 20 Dec 2018 23:42:42 +0000
  34
  35 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
  36
  37   * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
  38   * Fix: Link down does not work on any intf configured in a VRF
  39   * Add: ethtool: add link-speed 10 to valid values array
  40   * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
  41   * Add: warning when bridge attribute are used on non br[port] intf
  42   * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
  43   * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
  44   * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
  45   * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
  46   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
  47   * Closes: ethtool: link-fec: local variable 'fec_attrs'
  48             referencede before assignment
  49   * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
  50          an interface
  51
  52  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 24 Oct 2018 23:42:42 +0200
  53
  54 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
  55
  56   * Package architecture refactoring and cleanups
  57   * Package can be build/install as debian, pip or rpm package
  58   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
  59   * VRF slaves: add support for link-down yes
  60   * addressvirtual: macvlan: add default metric to ip4 and ip6
  61   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
  62   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
  63   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
  64   * Configuration for IPv6 link-local auto-generate mode, new attributes:
  65         ipv6-addrgen (address addon)
  66         address-virtual-ipv6-addrgen (addressvirtual addon)
  67
  68  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
  69
  70 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
  71
  72   * Fix: Link down does not work on SVI configured in a VRF
  73   * Fix: ifreload causes MTU to drop on bridge SVIs
  74   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  75   * Fix: ifreload error on deleting bond slaves from an already configured bond
  76   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  77   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  78   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  79   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  80   * Fix: using reserved VLAN range reports error but ifreload returns 0
  81   * Fix: unable to set bridge-portmcrouter to "2"
  82   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  83   * Fix: traditional bridge svi breaks when extra bridge added
  84   * Fix: github #39: addons: vrf: fix vrf slave link kind
  85   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  86
  87  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  88
  89 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
  90
  91   * Fix: ip[6]-forward attributes not set at boot
  92
  93  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  94
  95 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
  96
  97   * Fix: python exception on macvlans address dump
  98   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  99
 100  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
 101
 102 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
 103
 104   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
 105   * New. Enabled: bridge attributes, when removed reset to default
 106   * New. Enabled: vxlan attributes, when removed reset to default
 107   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
 108   * Fix: policy "iface_defaults" not supported for MTU
 109   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
 110   * Fix: warning for vlan reserved range
 111   * Fix: MTU handling on bridge SVIs
 112
 113  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
 114
 115 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
 116
 117   * New. Enabled: default policy for bridge MAC address
 118   * Fix: ethtool: don't set link speed and duplex if autoneg is on
 119
 120  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
 121
 122 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
 123
 124   * Fix: VRF: ssh session not killed on ifreload
 125
 126  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
 127
 128 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
 129
 130   * New. Enabled: mpls-enable attribute
 131   * New. Enabled: bond and bridge module moved to netlink configuration
 132   * New. Enabled: handle a mix of auto and specified vrf table ids
 133   * Fix: igmp attribute reset to defaults when removed from config
 134
 135  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
 136
 137 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
 138
 139   * Fix: link-down attribute not applied on slave ports
 140   * Fix: bug that prevented config of mtu below 1280
 141
 142  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
 143
 144 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
 145
 146   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 147   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 148   * New. Enabled: bond-lacp-rate support slow/fast argument
 149   * New. Enabled: ifquery --syntax-help: add support for json output
 150   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 151   * New. Enabled: address: add new attribute 'ip6-forward'
 152   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 153   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 154   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 155   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 156   * Fix: bond: add attribute bond-(up|down)delay
 157   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 158
 159  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 160
 161 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
 162
 163   * New. Enabled: support for bridge-learning attribute
 164
 165  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 166
 167 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
 168
 169   * New. Enabled: update link-speed values: add 25G and 50G
 170   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 171
 172  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 173
 174 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
 175
 176   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 177   * New. Enabled: syntax check to warn on common configuration mistakes
 178   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 179     and no upperifaces
 180   * Fix: fixes for MTU handling
 181   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 182
 183  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 184
 185 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
 186
 187   * Closes: github #14. add environment variables passed to user scripts
 188   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 189
 190  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 191
 192 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
 193
 194   * Fix: handling of EXISTS errors on address add
 195   * Fix: handling of mtu on addressvirtual macvlan devices
 196   * Fix: mako namespace handling
 197
 198  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 199
 200 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
 201
 202   * Performance improvements
 203   * New. Enabled: sbin: start-networking: support hotplug class from init script
 204   * New. Enabled: support for classical numerical bond modes
 205   * New. Enabled: extend ifquery support for mstpctl addons
 206   * New. Enabled: each addon may perform semantic and syntax checks by
 207     implementing a custom method
 208   * Fix: Support for address-virtual lines under a vrf slave
 209   * Fix: Defaults for link attributes were not applied
 210   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 211   * Fix: ifquery to extract vlan-id from iface if not preset
 212   * Fix: ifquery -c bridge pvid error on a valid config
 213
 214  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 215
 216 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
 217
 218   * Fix: Interface configuration parsing error when keyword vlan
 219     is the interface name.
 220
 221  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 222
 223 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
 224
 225   * Fix: checks for invalid address-virtual attributes
 226   * New. Deprecated: `mstpctl-stp` attribute
 227   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 228   * New. Enabled: addon module for configuring vrf
 229   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 230     an untagged bridge is not configured
 231   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 232   * New. Enabled: introduce checks for reserved vrf table names
 233   * New. Enabled: ifquery: new option '--with-defaults' to include default
 234     attributes
 235   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 236   * New. Enabled: vrf awareness in dhcp addon module
 237
 238  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 239
 240 ifupdown2 (1.1) unstable; urgency=low
 241
 242   * Initial release.
 243
 244  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700