]> git.proxmox.com Git - mirror_ifupdown2.git/blob - debian/changelog
log: use stderr if syslog initialization fails
[mirror_ifupdown2.git] / debian / changelog
1 ifupdown2 (1.2.3-1) unstable; urgency=medium
2
3 * Fix: log: use stderr if syslog initialization fails (closes: #917534)
4
5 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 30 Dec 2018 23:42:42 +0700
6
7 ifupdown2 (1.2.2-1) unstable; urgency=medium
8
9 * New: add support for B.A.T.M.A.N. adv. attributes
10 * New: support for new iproute2 format (bridge vlan show)
11 * New: add new checks for existing device with vxlan attributes
12 * Fix: pypi install: local addons modules should be loaded first
13 * Fix: link-down yes on vrf slaves
14 * Fix: nlmanager: use strerror to format kernel error
15 * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
16 * Fix: man: remove non-implemented -m option (closes: #905572)
17
18 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 20 Dec 2018 23:42:42 +0000
19
20 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
21
22 * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
23 * Fix: Link down does not work on any intf configured in a VRF
24 * Add: ethtool: add link-speed 10 to valid values array
25 * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
26 * Add: warning when bridge attribute are used on non br[port] intf
27 * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
28 * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
29 * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
30 * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
31 * addressvirtual module_globals "addressvirtual_with_route_metric" policy
32 * Closes: ethtool: link-fec: local variable 'fec_attrs'
33 referencede before assignment
34 * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
35 an interface
36
37 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200
38
39 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
40
41 * Package architecture refactoring and cleanups
42 * Package can be build/install as debian, pip or rpm package
43 * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
44 * VRF slaves: add support for link-down yes
45 * addressvirtual: macvlan: add default metric to ip4 and ip6
46 * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
47 * Closes #58: address addon "vlan_aware_bridge_address_support" policy
48 * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
49 * Configuration for IPv6 link-local auto-generate mode, new attributes:
50 ipv6-addrgen (address addon)
51 address-virtual-ipv6-addrgen (addressvirtual addon)
52
53 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200
54
55 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
56
57 * Fix: Link down does not work on SVI configured in a VRF
58 * Fix: ifreload causes MTU to drop on bridge SVIs
59 * Fix: addons: addressvirtual: check if SVI name is first in routing table
60 * Fix: ifreload error on deleting bond slaves from an already configured bond
61 * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
62 * Fix: ifupdown2 syntax check needed for vxlan interfaces
63 * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
64 * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
65 * Fix: using reserved VLAN range reports error but ifreload returns 0
66 * Fix: unable to set bridge-portmcrouter to "2"
67 * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
68 * Fix: traditional bridge svi breaks when extra bridge added
69 * Fix: github #39: addons: vrf: fix vrf slave link kind
70 * New. Enabled: addons: vxlan: add support for vxlan-port attribute
71
72 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200
73
74 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
75
76 * Fix: ip[6]-forward attributes not set at boot
77
78 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100
79
80 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
81
82 * Fix: python exception on macvlans address dump
83 * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
84
85 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100
86
87 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
88
89 * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
90 * New. Enabled: bridge attributes, when removed reset to default
91 * New. Enabled: vxlan attributes, when removed reset to default
92 * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
93 * Fix: policy "iface_defaults" not supported for MTU
94 * Fix: address module: handling of ipv4 & ipv6 (add/remove)
95 * Fix: warning for vlan reserved range
96 * Fix: MTU handling on bridge SVIs
97
98 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100
99
100 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
101
102 * New. Enabled: default policy for bridge MAC address
103 * Fix: ethtool: don't set link speed and duplex if autoneg is on
104
105 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200
106
107 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
108
109 * Fix: VRF: ssh session not killed on ifreload
110
111 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200
112
113 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
114
115 * New. Enabled: mpls-enable attribute
116 * New. Enabled: bond and bridge module moved to netlink configuration
117 * New. Enabled: handle a mix of auto and specified vrf table ids
118 * Fix: igmp attribute reset to defaults when removed from config
119
120 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200
121
122 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
123
124 * Fix: link-down attribute not applied on slave ports
125 * Fix: bug that prevented config of mtu below 1280
126
127 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700
128
129 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
130
131 * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
132 * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
133 * New. Enabled: bond-lacp-rate support slow/fast argument
134 * New. Enabled: ifquery --syntax-help: add support for json output
135 * New. Enabled: vlan: add new attribute 'vlan-protocol'
136 * New. Enabled: address: add new attribute 'ip6-forward'
137 * New. Enabled: bridge: add new attribute 'bridge-mcstats'
138 * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
139 * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
140 * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
141 * Fix: bond: add attribute bond-(up|down)delay
142 * Fix: bridge-vids: --syntax-check accepts legacy syntax
143
144 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200
145
146 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
147
148 * New. Enabled: support for bridge-learning attribute
149
150 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
151
152 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
153
154 * New. Enabled: update link-speed values: add 25G and 50G
155 * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
156
157 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
158
159 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
160
161 * New. Enabled: fix for inet and inet6 dhcp on the same interface
162 * New. Enabled: syntax check to warn on common configuration mistakes
163 * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
164 and no upperifaces
165 * Fix: fixes for MTU handling
166 * Fix: dhcpv6 fails if interface doesn't have link-local addr
167
168 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
169
170 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
171
172 * Closes: github #14. add environment variables passed to user scripts
173 * New. Enabled: addons may provide a list of ifupdown scripts to ignore
174
175 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
176
177 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
178
179 * Fix: handling of EXISTS errors on address add
180 * Fix: handling of mtu on addressvirtual macvlan devices
181 * Fix: mako namespace handling
182
183 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
184
185 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
186
187 * Performance improvements
188 * New. Enabled: sbin: start-networking: support hotplug class from init script
189 * New. Enabled: support for classical numerical bond modes
190 * New. Enabled: extend ifquery support for mstpctl addons
191 * New. Enabled: each addon may perform semantic and syntax checks by
192 implementing a custom method
193 * Fix: Support for address-virtual lines under a vrf slave
194 * Fix: Defaults for link attributes were not applied
195 * Fix: Disable IPv6 duplicate address detection on VRR interfaces
196 * Fix: ifquery to extract vlan-id from iface if not preset
197 * Fix: ifquery -c bridge pvid error on a valid config
198
199 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
200
201 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
202
203 * Fix: Interface configuration parsing error when keyword vlan
204 is the interface name.
205
206 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
207
208 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
209
210 * Fix: checks for invalid address-virtual attributes
211 * New. Deprecated: `mstpctl-stp` attribute
212 * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
213 * New. Enabled: addon module for configuring vrf
214 * New. Enabled: bridge: display warning when (in vlan unware bridge)
215 an untagged bridge is not configured
216 * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
217 * New. Enabled: introduce checks for reserved vrf table names
218 * New. Enabled: ifquery: new option '--with-defaults' to include default
219 attributes
220 * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
221 * New. Enabled: vrf awareness in dhcp addon module
222
223 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
224
225 ifupdown2 (1.1) unstable; urgency=low
226
227 * Initial release.
228
229 -- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700