debian/changelog

   1 ifupdown2 (1.2.4-1) unstable; urgency=medium
   2
   3   * Fix: statemanager directory path customization via ifupdown2.conf
   4          (closes: #918832)
   5
   6  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 11 Jan 2019 23:42:42 +0000
   7
   8 ifupdown2 (1.2.3-1) unstable; urgency=medium
   9
  10   * Fix: log: use stderr if syslog initialization fails (closes: #917534)
  11
  12  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 30 Dec 2018 23:42:42 +0700
  13
  14 ifupdown2 (1.2.2-1) unstable; urgency=medium
  15
  16   * New: add support for B.A.T.M.A.N. adv. attributes
  17   * New: support for new iproute2 format (bridge vlan show)
  18   * New: add new checks for existing device with vxlan attributes
  19   * Fix: pypi install: local addons modules should be loaded first
  20   * Fix: link-down yes on vrf slaves
  21   * Fix: nlmanager: use strerror to format kernel error
  22   * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
  23   * Fix: man: remove non-implemented -m option (closes: #905572)
  24
  25  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 20 Dec 2018 23:42:42 +0000
  26
  27 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
  28
  29   * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
  30   * Fix: Link down does not work on any intf configured in a VRF
  31   * Add: ethtool: add link-speed 10 to valid values array
  32   * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
  33   * Add: warning when bridge attribute are used on non br[port] intf
  34   * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
  35   * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
  36   * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
  37   * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
  38   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
  39   * Closes: ethtool: link-fec: local variable 'fec_attrs'
  40             referencede before assignment
  41   * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
  42          an interface
  43
  44  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 24 Oct 2018 23:42:42 +0200
  45
  46 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
  47
  48   * Package architecture refactoring and cleanups
  49   * Package can be build/install as debian, pip or rpm package
  50   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
  51   * VRF slaves: add support for link-down yes
  52   * addressvirtual: macvlan: add default metric to ip4 and ip6
  53   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
  54   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
  55   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
  56   * Configuration for IPv6 link-local auto-generate mode, new attributes:
  57         ipv6-addrgen (address addon)
  58         address-virtual-ipv6-addrgen (addressvirtual addon)
  59
  60  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
  61
  62 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
  63
  64   * Fix: Link down does not work on SVI configured in a VRF
  65   * Fix: ifreload causes MTU to drop on bridge SVIs
  66   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  67   * Fix: ifreload error on deleting bond slaves from an already configured bond
  68   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  69   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  70   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  71   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  72   * Fix: using reserved VLAN range reports error but ifreload returns 0
  73   * Fix: unable to set bridge-portmcrouter to "2"
  74   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  75   * Fix: traditional bridge svi breaks when extra bridge added
  76   * Fix: github #39: addons: vrf: fix vrf slave link kind
  77   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  78
  79  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  80
  81 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
  82
  83   * Fix: ip[6]-forward attributes not set at boot
  84
  85  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  86
  87 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
  88
  89   * Fix: python exception on macvlans address dump
  90   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  91
  92  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
  93
  94 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
  95
  96   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
  97   * New. Enabled: bridge attributes, when removed reset to default
  98   * New. Enabled: vxlan attributes, when removed reset to default
  99   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
 100   * Fix: policy "iface_defaults" not supported for MTU
 101   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
 102   * Fix: warning for vlan reserved range
 103   * Fix: MTU handling on bridge SVIs
 104
 105  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
 106
 107 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
 108
 109   * New. Enabled: default policy for bridge MAC address
 110   * Fix: ethtool: don't set link speed and duplex if autoneg is on
 111
 112  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
 113
 114 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
 115
 116   * Fix: VRF: ssh session not killed on ifreload
 117
 118  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
 119
 120 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
 121
 122   * New. Enabled: mpls-enable attribute
 123   * New. Enabled: bond and bridge module moved to netlink configuration
 124   * New. Enabled: handle a mix of auto and specified vrf table ids
 125   * Fix: igmp attribute reset to defaults when removed from config
 126
 127  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
 128
 129 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
 130
 131   * Fix: link-down attribute not applied on slave ports
 132   * Fix: bug that prevented config of mtu below 1280
 133
 134  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
 135
 136 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
 137
 138   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 139   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 140   * New. Enabled: bond-lacp-rate support slow/fast argument
 141   * New. Enabled: ifquery --syntax-help: add support for json output
 142   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 143   * New. Enabled: address: add new attribute 'ip6-forward'
 144   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 145   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 146   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 147   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 148   * Fix: bond: add attribute bond-(up|down)delay
 149   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 150
 151  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 152
 153 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
 154
 155   * New. Enabled: support for bridge-learning attribute
 156
 157  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 158
 159 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
 160
 161   * New. Enabled: update link-speed values: add 25G and 50G
 162   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 163
 164  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 165
 166 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
 167
 168   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 169   * New. Enabled: syntax check to warn on common configuration mistakes
 170   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 171     and no upperifaces
 172   * Fix: fixes for MTU handling
 173   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 174
 175  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 176
 177 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
 178
 179   * Closes: github #14. add environment variables passed to user scripts
 180   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 181
 182  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 183
 184 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
 185
 186   * Fix: handling of EXISTS errors on address add
 187   * Fix: handling of mtu on addressvirtual macvlan devices
 188   * Fix: mako namespace handling
 189
 190  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 191
 192 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
 193
 194   * Performance improvements
 195   * New. Enabled: sbin: start-networking: support hotplug class from init script
 196   * New. Enabled: support for classical numerical bond modes
 197   * New. Enabled: extend ifquery support for mstpctl addons
 198   * New. Enabled: each addon may perform semantic and syntax checks by
 199     implementing a custom method
 200   * Fix: Support for address-virtual lines under a vrf slave
 201   * Fix: Defaults for link attributes were not applied
 202   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 203   * Fix: ifquery to extract vlan-id from iface if not preset
 204   * Fix: ifquery -c bridge pvid error on a valid config
 205
 206  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 207
 208 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
 209
 210   * Fix: Interface configuration parsing error when keyword vlan
 211     is the interface name.
 212
 213  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 214
 215 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
 216
 217   * Fix: checks for invalid address-virtual attributes
 218   * New. Deprecated: `mstpctl-stp` attribute
 219   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 220   * New. Enabled: addon module for configuring vrf
 221   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 222     an untagged bridge is not configured
 223   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 224   * New. Enabled: introduce checks for reserved vrf table names
 225   * New. Enabled: ifquery: new option '--with-defaults' to include default
 226     attributes
 227   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 228   * New. Enabled: vrf awareness in dhcp addon module
 229
 230  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 231
 232 ifupdown2 (1.1) unstable; urgency=low
 233
 234   * Initial release.
 235
 236  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700