debian/changelog

   1 ifupdown2 (2.0.0-1) unstable; urgency=medium
   2
   3   * Introduction of the live netlink cache
   4   * Refactoring and PEP8 fixes
   5   * Install systemd ifupdown2.netowrking.service and ifup.service
   6   * Addons: bond: bond-primary attributes (closes: #9)
   7   * Addons: address-virtual: vrrp support
   8   * Addons: address: add arp-accept option
   9   * Addons: tunnel: adding "tunnel-" prefix to every attributes
  10   * Loopback interface won't go down (unless link-down yes)
  11   * Macvlans (address-virtual) can now be configured without ips
  12   * Add support for vxlan multicast group (vxlan-mcastgrp)
  13   * New sets of poliicies:
  14        - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
  15        - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
  16        - bridge policy for vxlan port:
  17                vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
  18
  19  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 01 Oct 2019 23:42:42 +0200
  20
  21 ifupdown2 (1.2.8-1) unstable; urgency=medium
  22
  23   * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
  24
  25  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 11 Jul 2019 23:42:42 +0200
  26
  27 ifupdown2 (1.2.7-1) unstable; urgency=medium
  28
  29   * New: Add bridge-ports-condone-regex option (closes #117)
  30
  31  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jul 2019 23:42:42 +0200
  32
  33 ifupdown2 (1.2.6-1) unstable; urgency=medium
  34
  35   * Fix: AttributeError exception in bridge module (fixes #90)
  36   * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
  37   * New. policymanager: merge module policy instead of overriding duplicates
  38   * New: set default mtu on user defined device (via link-type)
  39   * New: add support for vxlan-ttl attribute
  40   * New: add support for vrrp attribute
  41   * New: introduce new bridge policy:
  42         "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
  43   * New: link-down yes will also down macvlans
  44   * New: XFRM addon module
  45   * New: Add policy to wait for IPv6 link local address to be available
  46
  47  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 23 Jun 2019 23:42:42 -1000
  48
  49 ifupdown2 (1.2.5-1) unstable; urgency=medium
  50
  51   * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
  52   * Fix: debian: install sysvinit script (closes: #918775)
  53   * Fix: debian: postinst: remove diversion after upgrade from stretch
  54          (closes: #919443)
  55
  56  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 21 Jan 2019 23:42:42 +8000
  57
  58 ifupdown2 (1.2.4-1) unstable; urgency=medium
  59
  60   * Fix: statemanager directory path customization via ifupdown2.conf
  61          (closes: #918832)
  62
  63  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 11 Jan 2019 23:42:42 +0000
  64
  65 ifupdown2 (1.2.3-1) unstable; urgency=medium
  66
  67   * Fix: log: use stderr if syslog initialization fails (closes: #917534)
  68
  69  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 30 Dec 2018 23:42:42 +0700
  70
  71 ifupdown2 (1.2.2-1) unstable; urgency=medium
  72
  73   * New: add support for B.A.T.M.A.N. adv. attributes
  74   * New: support for new iproute2 format (bridge vlan show)
  75   * New: add new checks for existing device with vxlan attributes
  76   * Fix: pypi install: local addons modules should be loaded first
  77   * Fix: link-down yes on vrf slaves
  78   * Fix: nlmanager: use strerror to format kernel error
  79   * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
  80   * Fix: man: remove non-implemented -m option (closes: #905572)
  81
  82  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 20 Dec 2018 23:42:42 +0000
  83
  84 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
  85
  86   * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
  87   * Fix: Link down does not work on any intf configured in a VRF
  88   * Add: ethtool: add link-speed 10 to valid values array
  89   * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
  90   * Add: warning when bridge attribute are used on non br[port] intf
  91   * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
  92   * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
  93   * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
  94   * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
  95   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
  96   * Closes: ethtool: link-fec: local variable 'fec_attrs'
  97             referencede before assignment
  98   * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
  99          an interface
 100
 101  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 24 Oct 2018 23:42:42 +0200
 102
 103 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
 104
 105   * Package architecture refactoring and cleanups
 106   * Package can be build/install as debian, pip or rpm package
 107   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
 108   * VRF slaves: add support for link-down yes
 109   * addressvirtual: macvlan: add default metric to ip4 and ip6
 110   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
 111   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
 112   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
 113   * Configuration for IPv6 link-local auto-generate mode, new attributes:
 114         ipv6-addrgen (address addon)
 115         address-virtual-ipv6-addrgen (addressvirtual addon)
 116
 117  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
 118
 119 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
 120
 121   * Fix: Link down does not work on SVI configured in a VRF
 122   * Fix: ifreload causes MTU to drop on bridge SVIs
 123   * Fix: addons: addressvirtual: check if SVI name is first in routing table
 124   * Fix: ifreload error on deleting bond slaves from an already configured bond
 125   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
 126   * Fix: ifupdown2 syntax check needed for vxlan interfaces
 127   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
 128   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
 129   * Fix: using reserved VLAN range reports error but ifreload returns 0
 130   * Fix: unable to set bridge-portmcrouter to "2"
 131   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
 132   * Fix: traditional bridge svi breaks when extra bridge added
 133   * Fix: github #39: addons: vrf: fix vrf slave link kind
 134   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
 135
 136  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
 137
 138 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
 139
 140   * Fix: ip[6]-forward attributes not set at boot
 141
 142  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
 143
 144 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
 145
 146   * Fix: python exception on macvlans address dump
 147   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
 148
 149  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
 150
 151 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
 152
 153   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
 154   * New. Enabled: bridge attributes, when removed reset to default
 155   * New. Enabled: vxlan attributes, when removed reset to default
 156   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
 157   * Fix: policy "iface_defaults" not supported for MTU
 158   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
 159   * Fix: warning for vlan reserved range
 160   * Fix: MTU handling on bridge SVIs
 161
 162  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
 163
 164 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
 165
 166   * New. Enabled: default policy for bridge MAC address
 167   * Fix: ethtool: don't set link speed and duplex if autoneg is on
 168
 169  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
 170
 171 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
 172
 173   * Fix: VRF: ssh session not killed on ifreload
 174
 175  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
 176
 177 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
 178
 179   * New. Enabled: mpls-enable attribute
 180   * New. Enabled: bond and bridge module moved to netlink configuration
 181   * New. Enabled: handle a mix of auto and specified vrf table ids
 182   * Fix: igmp attribute reset to defaults when removed from config
 183
 184  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
 185
 186 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
 187
 188   * Fix: link-down attribute not applied on slave ports
 189   * Fix: bug that prevented config of mtu below 1280
 190
 191  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
 192
 193 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
 194
 195   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 196   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 197   * New. Enabled: bond-lacp-rate support slow/fast argument
 198   * New. Enabled: ifquery --syntax-help: add support for json output
 199   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 200   * New. Enabled: address: add new attribute 'ip6-forward'
 201   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 202   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 203   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 204   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 205   * Fix: bond: add attribute bond-(up|down)delay
 206   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 207
 208  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 209
 210 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
 211
 212   * New. Enabled: support for bridge-learning attribute
 213
 214  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 215
 216 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
 217
 218   * New. Enabled: update link-speed values: add 25G and 50G
 219   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 220
 221  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 222
 223 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
 224
 225   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 226   * New. Enabled: syntax check to warn on common configuration mistakes
 227   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 228     and no upperifaces
 229   * Fix: fixes for MTU handling
 230   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 231
 232  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 233
 234 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
 235
 236   * Closes: github #14. add environment variables passed to user scripts
 237   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 238
 239  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 240
 241 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
 242
 243   * Fix: handling of EXISTS errors on address add
 244   * Fix: handling of mtu on addressvirtual macvlan devices
 245   * Fix: mako namespace handling
 246
 247  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 248
 249 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
 250
 251   * Performance improvements
 252   * New. Enabled: sbin: start-networking: support hotplug class from init script
 253   * New. Enabled: support for classical numerical bond modes
 254   * New. Enabled: extend ifquery support for mstpctl addons
 255   * New. Enabled: each addon may perform semantic and syntax checks by
 256     implementing a custom method
 257   * Fix: Support for address-virtual lines under a vrf slave
 258   * Fix: Defaults for link attributes were not applied
 259   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 260   * Fix: ifquery to extract vlan-id from iface if not preset
 261   * Fix: ifquery -c bridge pvid error on a valid config
 262
 263  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 264
 265 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
 266
 267   * Fix: Interface configuration parsing error when keyword vlan
 268     is the interface name.
 269
 270  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 271
 272 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
 273
 274   * Fix: checks for invalid address-virtual attributes
 275   * New. Deprecated: `mstpctl-stp` attribute
 276   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 277   * New. Enabled: addon module for configuring vrf
 278   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 279     an untagged bridge is not configured
 280   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 281   * New. Enabled: introduce checks for reserved vrf table names
 282   * New. Enabled: ifquery: new option '--with-defaults' to include default
 283     attributes
 284   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 285   * New. Enabled: vrf awareness in dhcp addon module
 286
 287  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 288
 289 ifupdown2 (1.1) unstable; urgency=low
 290
 291   * Initial release.
 292
 293  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700