debian/changelog

   1 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
   2
   3   * Tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
   4   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
   5
   6  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 26 Jun 2018 23:42:42 +0200
   7
   8 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
   9
  10   * Package architecture refactoring and cleanups
  11   * Package can be build/install as debian, pip or rpm package
  12   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
  13   * VRF slaves: add support for link-down yes
  14   * addressvirtual: macvlan: add default metric to ip4 and ip6
  15   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
  16   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
  17   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
  18   * Configuration for IPv6 link-local auto-generate mode, new attributes:
  19         ipv6-addrgen (address addon)
  20         address-virtual-ipv6-addrgen (addressvirtual addon)
  21
  22  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
  23
  24 ifupdown2 (1.1.18) RELEASED; urgency=medium
  25
  26   * Fix: Link down does not work on SVI configured in a VRF
  27   * Fix: ifreload causes MTU to drop on bridge SVIs
  28   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  29   * Fix: ifreload error on deleting bond slaves from an already configured bond
  30   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  31   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  32   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  33   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  34   * Fix: using reserved VLAN range reports error but ifreload returns 0
  35   * Fix: unable to set bridge-portmcrouter to "2"
  36   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  37   * Fix: traditional bridge svi breaks when extra bridge added
  38   * Fix: github #39: addons: vrf: fix vrf slave link kind
  39   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  40
  41  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  42
  43 ifupdown2 (1.1.17) RELEASED; urgency=medium
  44
  45   * Fix: ip[6]-forward attributes not set at boot
  46
  47  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  48
  49 ifupdown2 (1.1.16) RELEASED; urgency=medium
  50
  51   * Fix: python exception on macvlans address dump
  52   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  53
  54  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
  55
  56 ifupdown2 (1.1.15) RELEASED; urgency=medium
  57
  58   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
  59   * New. Enabled: bridge attributes, when removed reset to default
  60   * New. Enabled: vxlan attributes, when removed reset to default
  61   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
  62   * Fix: policy "iface_defaults" not supported for MTU
  63   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
  64   * Fix: warning for vlan reserved range
  65   * Fix: MTU handling on bridge SVIs
  66
  67  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
  68
  69 ifupdown2 (1.1.14) RELEASED; urgency=medium
  70
  71   * New. Enabled: default policy for bridge MAC address
  72   * Fix: ethtool: don't set link speed and duplex if autoneg is on
  73
  74  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
  75
  76 ifupdown2 (1.1.13) RELEASED; urgency=medium
  77
  78   * Fix: VRF: ssh session not killed on ifreload
  79
  80  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
  81
  82 ifupdown2 (1.1.12) RELEASED; urgency=medium
  83
  84   * New. Enabled: mpls-enable attribute
  85   * New. Enabled: bond and bridge module moved to netlink configuration
  86   * New. Enabled: handle a mix of auto and specified vrf table ids
  87   * Fix: igmp attribute reset to defaults when removed from config
  88
  89  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
  90
  91 ifupdown2 (1.1.11) RELEASED; urgency=medium
  92
  93   * Fix: link-down attribute not applied on slave ports
  94   * Fix: bug that prevented config of mtu below 1280
  95
  96  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
  97
  98 ifupdown2 (1.1.10) RELEASED; urgency=medium
  99
 100   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 101   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 102   * New. Enabled: bond-lacp-rate support slow/fast argument
 103   * New. Enabled: ifquery --syntax-help: add support for json output
 104   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 105   * New. Enabled: address: add new attribute 'ip6-forward'
 106   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 107   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 108   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 109   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 110   * Fix: bond: add attribute bond-(up|down)delay
 111   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 112
 113  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 114
 115 ifupdown2 (1.1.9) RELEASED; urgency=medium
 116
 117   * New. Enabled: support for bridge-learning attribute
 118
 119  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 120
 121 ifupdown2 (1.1.8) RELEASED; urgency=medium
 122
 123   * New. Enabled: update link-speed values: add 25G and 50G
 124   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 125
 126  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 127
 128 ifupdown2 (1.1.7) RELEASED; urgency=medium
 129
 130   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 131   * New. Enabled: syntax check to warn on common configuration mistakes
 132   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 133     and no upperifaces
 134   * Fix: fixes for MTU handling
 135   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 136
 137  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 138
 139 ifupdown2 (1.1.6) RELEASED; urgency=medium
 140
 141   * Closes: github #14. add environment variables passed to user scripts
 142   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 143
 144  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 145
 146 ifupdown2 (1.1.5) RELEASED; urgency=medium
 147
 148   * Fix: handling of EXISTS errors on address add
 149   * Fix: handling of mtu on addressvirtual macvlan devices
 150   * Fix: mako namespace handling
 151
 152  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 153
 154 ifupdown2 (1.1.4) RELEASED; urgency=medium
 155
 156   * Performance improvements
 157   * New. Enabled: sbin: start-networking: support hotplug class from init script
 158   * New. Enabled: support for classical numerical bond modes
 159   * New. Enabled: extend ifquery support for mstpctl addons
 160   * New. Enabled: each addon may perform semantic and syntax checks by
 161     implementing a custom method
 162   * Fix: Support for address-virtual lines under a vrf slave
 163   * Fix: Defaults for link attributes were not applied
 164   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 165   * Fix: ifquery to extract vlan-id from iface if not preset
 166   * Fix: ifquery -c bridge pvid error on a valid config
 167
 168  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 169
 170 ifupdown2 (1.1.3) RELEASED; urgency=medium
 171
 172   * Fix: Interface configuration parsing error when keyword vlan
 173     is the interface name.
 174
 175  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 176
 177 ifupdown2 (1.1.2) RELEASED; urgency=medium
 178
 179   * Fix: checks for invalid address-virtual attributes
 180   * New. Deprecated: `mstpctl-stp` attribute
 181   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 182   * New. Enabled: addon module for configuring vrf
 183   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 184     an untagged bridge is not configured
 185   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 186   * New. Enabled: introduce checks for reserved vrf table names
 187   * New. Enabled: ifquery: new option '--with-defaults' to include default
 188     attributes
 189   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 190   * New. Enabled: vrf awareness in dhcp addon module
 191
 192  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 193
 194 ifupdown2 (1.1.0) unstable; urgency=low
 195
 196   * Initial release.
 197
 198  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700