]> git.proxmox.com Git - mirror_ifupdown2.git/blob - debian/changelog
Merge pull request #151 from aderumier/fix-forwarding-3
[mirror_ifupdown2.git] / debian / changelog
1 ifupdown2 (3.0.0-1) unstable; urgency=medium
2
3 * New. Enabled: python3 support
4 * New. Enabled: support for marking interfaces as mgmt interfaces
5 * Fix: dry-run exceptions
6 * Fix: set bridge MTU after bridge creation
7 * Fix: tunnel configuration compatibility with ifupdown1 (closes: #133)
8
9 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 31 Dec 2019 23:42:42 +0100
10
11 ifupdown2 (2.0.1-1) unstable; urgency=medium
12
13 * New argv option: --nldebug to print netlink debug message
14 * New: ethtool: nics (GRO, LRO GSO, TSO, UFO, TX and RX) offload attributes
15
16 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 31 Dec 2019 15:21:06 +0100
17
18 ifupdown2 (2.0.0-1) unstable; urgency=medium
19
20 * Introduction of the live netlink cache
21 * Refactoring and PEP8 fixes
22 * Install systemd ifupdown2.netowrking.service and ifup.service
23 * Addons: bond: bond-primary attributes (closes: #9)
24 * Addons: address-virtual: vrrp support
25 * Addons: address: add arp-accept option
26 * Addons: tunnel: adding "tunnel-" prefix to every attributes
27 * Loopback interface won't go down (unless link-down yes)
28 * Macvlans (address-virtual) can now be configured without ips
29 * Add support for vxlan multicast group (vxlan-mcastgrp)
30 * New sets of poliicies:
31 - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
32 - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
33 - bridge policy for vxlan port:
34 vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
35
36 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 01 Oct 2019 23:42:42 +0200
37
38 ifupdown2 (1.2.8-1) unstable; urgency=medium
39
40 * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
41
42 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 11 Jul 2019 23:42:42 +0200
43
44 ifupdown2 (1.2.7-1) unstable; urgency=medium
45
46 * New: Add bridge-ports-condone-regex option (closes #117)
47
48 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jul 2019 23:42:42 +0200
49
50 ifupdown2 (1.2.6-1) unstable; urgency=medium
51
52 * Fix: AttributeError exception in bridge module (fixes #90)
53 * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
54 * New. policymanager: merge module policy instead of overriding duplicates
55 * New: set default mtu on user defined device (via link-type)
56 * New: add support for vxlan-ttl attribute
57 * New: add support for vrrp attribute
58 * New: introduce new bridge policy:
59 "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
60 * New: link-down yes will also down macvlans
61 * New: XFRM addon module
62 * New: Add policy to wait for IPv6 link local address to be available
63
64 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 23 Jun 2019 23:42:42 -1000
65
66 ifupdown2 (1.2.5-1) unstable; urgency=medium
67
68 * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
69 * Fix: debian: install sysvinit script (closes: #918775)
70 * Fix: debian: postinst: remove diversion after upgrade from stretch
71 (closes: #919443)
72
73 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 21 Jan 2019 23:42:42 +8000
74
75 ifupdown2 (1.2.4-1) unstable; urgency=medium
76
77 * Fix: statemanager directory path customization via ifupdown2.conf
78 (closes: #918832)
79
80 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 11 Jan 2019 23:42:42 +0000
81
82 ifupdown2 (1.2.3-1) unstable; urgency=medium
83
84 * Fix: log: use stderr if syslog initialization fails (closes: #917534)
85
86 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 30 Dec 2018 23:42:42 +0700
87
88 ifupdown2 (1.2.2-1) unstable; urgency=medium
89
90 * New: add support for B.A.T.M.A.N. adv. attributes
91 * New: support for new iproute2 format (bridge vlan show)
92 * New: add new checks for existing device with vxlan attributes
93 * Fix: pypi install: local addons modules should be loaded first
94 * Fix: link-down yes on vrf slaves
95 * Fix: nlmanager: use strerror to format kernel error
96 * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
97 * Fix: man: remove non-implemented -m option (closes: #905572)
98
99 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 20 Dec 2018 23:42:42 +0000
100
101 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
102
103 * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
104 * Fix: Link down does not work on any intf configured in a VRF
105 * Add: ethtool: add link-speed 10 to valid values array
106 * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
107 * Add: warning when bridge attribute are used on non br[port] intf
108 * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
109 * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
110 * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
111 * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
112 * addressvirtual module_globals "addressvirtual_with_route_metric" policy
113 * Closes: ethtool: link-fec: local variable 'fec_attrs'
114 referencede before assignment
115 * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
116 an interface
117
118 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200
119
120 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
121
122 * Package architecture refactoring and cleanups
123 * Package can be build/install as debian, pip or rpm package
124 * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
125 * VRF slaves: add support for link-down yes
126 * addressvirtual: macvlan: add default metric to ip4 and ip6
127 * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
128 * Closes #58: address addon "vlan_aware_bridge_address_support" policy
129 * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
130 * Configuration for IPv6 link-local auto-generate mode, new attributes:
131 ipv6-addrgen (address addon)
132 address-virtual-ipv6-addrgen (addressvirtual addon)
133
134 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200
135
136 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
137
138 * Fix: Link down does not work on SVI configured in a VRF
139 * Fix: ifreload causes MTU to drop on bridge SVIs
140 * Fix: addons: addressvirtual: check if SVI name is first in routing table
141 * Fix: ifreload error on deleting bond slaves from an already configured bond
142 * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
143 * Fix: ifupdown2 syntax check needed for vxlan interfaces
144 * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
145 * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
146 * Fix: using reserved VLAN range reports error but ifreload returns 0
147 * Fix: unable to set bridge-portmcrouter to "2"
148 * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
149 * Fix: traditional bridge svi breaks when extra bridge added
150 * Fix: github #39: addons: vrf: fix vrf slave link kind
151 * New. Enabled: addons: vxlan: add support for vxlan-port attribute
152
153 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200
154
155 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
156
157 * Fix: ip[6]-forward attributes not set at boot
158
159 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100
160
161 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
162
163 * Fix: python exception on macvlans address dump
164 * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
165
166 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100
167
168 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
169
170 * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
171 * New. Enabled: bridge attributes, when removed reset to default
172 * New. Enabled: vxlan attributes, when removed reset to default
173 * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
174 * Fix: policy "iface_defaults" not supported for MTU
175 * Fix: address module: handling of ipv4 & ipv6 (add/remove)
176 * Fix: warning for vlan reserved range
177 * Fix: MTU handling on bridge SVIs
178
179 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100
180
181 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
182
183 * New. Enabled: default policy for bridge MAC address
184 * Fix: ethtool: don't set link speed and duplex if autoneg is on
185
186 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200
187
188 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
189
190 * Fix: VRF: ssh session not killed on ifreload
191
192 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200
193
194 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
195
196 * New. Enabled: mpls-enable attribute
197 * New. Enabled: bond and bridge module moved to netlink configuration
198 * New. Enabled: handle a mix of auto and specified vrf table ids
199 * Fix: igmp attribute reset to defaults when removed from config
200
201 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200
202
203 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
204
205 * Fix: link-down attribute not applied on slave ports
206 * Fix: bug that prevented config of mtu below 1280
207
208 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700
209
210 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
211
212 * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
213 * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
214 * New. Enabled: bond-lacp-rate support slow/fast argument
215 * New. Enabled: ifquery --syntax-help: add support for json output
216 * New. Enabled: vlan: add new attribute 'vlan-protocol'
217 * New. Enabled: address: add new attribute 'ip6-forward'
218 * New. Enabled: bridge: add new attribute 'bridge-mcstats'
219 * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
220 * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
221 * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
222 * Fix: bond: add attribute bond-(up|down)delay
223 * Fix: bridge-vids: --syntax-check accepts legacy syntax
224
225 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200
226
227 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
228
229 * New. Enabled: support for bridge-learning attribute
230
231 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
232
233 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
234
235 * New. Enabled: update link-speed values: add 25G and 50G
236 * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
237
238 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
239
240 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
241
242 * New. Enabled: fix for inet and inet6 dhcp on the same interface
243 * New. Enabled: syntax check to warn on common configuration mistakes
244 * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
245 and no upperifaces
246 * Fix: fixes for MTU handling
247 * Fix: dhcpv6 fails if interface doesn't have link-local addr
248
249 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
250
251 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
252
253 * Closes: github #14. add environment variables passed to user scripts
254 * New. Enabled: addons may provide a list of ifupdown scripts to ignore
255
256 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
257
258 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
259
260 * Fix: handling of EXISTS errors on address add
261 * Fix: handling of mtu on addressvirtual macvlan devices
262 * Fix: mako namespace handling
263
264 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
265
266 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
267
268 * Performance improvements
269 * New. Enabled: sbin: start-networking: support hotplug class from init script
270 * New. Enabled: support for classical numerical bond modes
271 * New. Enabled: extend ifquery support for mstpctl addons
272 * New. Enabled: each addon may perform semantic and syntax checks by
273 implementing a custom method
274 * Fix: Support for address-virtual lines under a vrf slave
275 * Fix: Defaults for link attributes were not applied
276 * Fix: Disable IPv6 duplicate address detection on VRR interfaces
277 * Fix: ifquery to extract vlan-id from iface if not preset
278 * Fix: ifquery -c bridge pvid error on a valid config
279
280 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
281
282 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
283
284 * Fix: Interface configuration parsing error when keyword vlan
285 is the interface name.
286
287 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
288
289 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
290
291 * Fix: checks for invalid address-virtual attributes
292 * New. Deprecated: `mstpctl-stp` attribute
293 * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
294 * New. Enabled: addon module for configuring vrf
295 * New. Enabled: bridge: display warning when (in vlan unware bridge)
296 an untagged bridge is not configured
297 * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
298 * New. Enabled: introduce checks for reserved vrf table names
299 * New. Enabled: ifquery: new option '--with-defaults' to include default
300 attributes
301 * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
302 * New. Enabled: vrf awareness in dhcp addon module
303
304 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
305
306 ifupdown2 (1.1) unstable; urgency=low
307
308 * Initial release.
309
310 -- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700