debian/changelog

   1 ifupdown2 (3.0.1-1) unstable; urgency=medium
   2
   3    * New. Enabled: ES bond with "es-sys-mac" attribute
   4    * New. Enabled: dhcp policy: dhclient_retry_on_failure
   5    * Fix: start-networking script is back to handle mgmt & hotplug cases
   6
   7  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 14 Apr 2020 23:42:42 +0200
   8
   9 ifupdown2 (3.0.0-1) unstable; urgency=medium
  10
  11    * New. Enabled: python3 support
  12    * New. Enabled: attribute alias support
  13    * New. Enabled: support for marking interfaces as mgmt interfaces
  14    * Fix: dry-run exceptions
  15    * Fix: bond enslavement ordering
  16    * Fix: ifquery-running: incorrect displayed data
  17    * Fix: set bridge MTU after bridge creation
  18    * Fix: tunnel configuration compatibility with ifupdown1
  19    * Fix: process MTU before addrgen
  20    * Fix: mstpctl: check mstpctl-stp and bridge-stp and fix bridge cache update
  21    * Removing python-argcomplete dependency
  22
  23  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 14 Apr 2020 23:42:42 +0200
  24
  25 ifupdown2 (2.0.2-1) unstable; urgency=medium
  26
  27   * New: addons: ethtool: add support for "ethtool_ignore_errors" policy
  28   * New: addons: dhcp: if mgmt vrf context exec dhclient in default vrf
  29   * Fix: nlpacket: don't raise an exception on 24 bytes mac address (#140)
  30   * Fix: IFLA_INFO_KIND: decode tunnel data
  31   * Fix: XFRM for 2.x release
  32   * Fix: addons.conf: remove duplicate entry for tunnel pre-up
  33
  34  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 04 Mar 2020 23:42:42 +0100
  35
  36 ifupdown2 (2.0.1-1) unstable; urgency=medium
  37
  38   * New argv option: --nldebug to print netlink debug message
  39   * New: ethtool: nics (GRO, LRO GSO, TSO, UFO, TX and RX) offload attributes
  40
  41  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 31 Dec 2019 15:21:06 +0100
  42
  43 ifupdown2 (2.0.0-1) unstable; urgency=medium
  44
  45   * Introduction of the live netlink cache
  46   * Refactoring and PEP8 fixes
  47   * Install systemd ifupdown2.netowrking.service and ifup.service
  48   * Addons: bond: bond-primary attributes (closes: #9)
  49   * Addons: address-virtual: vrrp support
  50   * Addons: address: add arp-accept option
  51   * Addons: tunnel: adding "tunnel-" prefix to every attributes
  52   * Loopback interface won't go down (unless link-down yes)
  53   * Macvlans (address-virtual) can now be configured without ips
  54   * Add support for vxlan multicast group (vxlan-mcastgrp)
  55   * New sets of poliicies:
  56        - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
  57        - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
  58        - bridge policy for vxlan port:
  59                vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
  60
  61  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 01 Oct 2019 23:42:42 +0200
  62
  63 ifupdown2 (1.2.8-1) unstable; urgency=medium
  64
  65   * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
  66
  67  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 11 Jul 2019 23:42:42 +0200
  68
  69 ifupdown2 (1.2.7-1) unstable; urgency=medium
  70
  71   * New: Add bridge-ports-condone-regex option (closes #117)
  72
  73  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jul 2019 23:42:42 +0200
  74
  75 ifupdown2 (1.2.6-1) unstable; urgency=medium
  76
  77   * Fix: AttributeError exception in bridge module (fixes #90)
  78   * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
  79   * New. policymanager: merge module policy instead of overriding duplicates
  80   * New: set default mtu on user defined device (via link-type)
  81   * New: add support for vxlan-ttl attribute
  82   * New: add support for vrrp attribute
  83   * New: introduce new bridge policy:
  84         "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
  85   * New: link-down yes will also down macvlans
  86   * New: XFRM addon module
  87   * New: Add policy to wait for IPv6 link local address to be available
  88
  89  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 23 Jun 2019 23:42:42 -1000
  90
  91 ifupdown2 (1.2.5-1) unstable; urgency=medium
  92
  93   * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
  94   * Fix: debian: install sysvinit script (closes: #918775)
  95   * Fix: debian: postinst: remove diversion after upgrade from stretch
  96          (closes: #919443)
  97
  98  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 21 Jan 2019 23:42:42 +8000
  99
 100 ifupdown2 (1.2.4-1) unstable; urgency=medium
 101
 102   * Fix: statemanager directory path customization via ifupdown2.conf
 103          (closes: #918832)
 104
 105  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 11 Jan 2019 23:42:42 +0000
 106
 107 ifupdown2 (1.2.3-1) unstable; urgency=medium
 108
 109   * Fix: log: use stderr if syslog initialization fails (closes: #917534)
 110
 111  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 30 Dec 2018 23:42:42 +0700
 112
 113 ifupdown2 (1.2.2-1) unstable; urgency=medium
 114
 115   * New: add support for B.A.T.M.A.N. adv. attributes
 116   * New: support for new iproute2 format (bridge vlan show)
 117   * New: add new checks for existing device with vxlan attributes
 118   * Fix: pypi install: local addons modules should be loaded first
 119   * Fix: link-down yes on vrf slaves
 120   * Fix: nlmanager: use strerror to format kernel error
 121   * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
 122   * Fix: man: remove non-implemented -m option (closes: #905572)
 123
 124  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 20 Dec 2018 23:42:42 +0000
 125
 126 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
 127
 128   * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
 129   * Fix: Link down does not work on any intf configured in a VRF
 130   * Add: ethtool: add link-speed 10 to valid values array
 131   * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
 132   * Add: warning when bridge attribute are used on non br[port] intf
 133   * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
 134   * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
 135   * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
 136   * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
 137   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
 138   * Closes: ethtool: link-fec: local variable 'fec_attrs'
 139             referencede before assignment
 140   * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
 141          an interface
 142
 143  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 24 Oct 2018 23:42:42 +0200
 144
 145 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
 146
 147   * Package architecture refactoring and cleanups
 148   * Package can be build/install as debian, pip or rpm package
 149   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
 150   * VRF slaves: add support for link-down yes
 151   * addressvirtual: macvlan: add default metric to ip4 and ip6
 152   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
 153   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
 154   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
 155   * Configuration for IPv6 link-local auto-generate mode, new attributes:
 156         ipv6-addrgen (address addon)
 157         address-virtual-ipv6-addrgen (addressvirtual addon)
 158
 159  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
 160
 161 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
 162
 163   * Fix: Link down does not work on SVI configured in a VRF
 164   * Fix: ifreload causes MTU to drop on bridge SVIs
 165   * Fix: addons: addressvirtual: check if SVI name is first in routing table
 166   * Fix: ifreload error on deleting bond slaves from an already configured bond
 167   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
 168   * Fix: ifupdown2 syntax check needed for vxlan interfaces
 169   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
 170   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
 171   * Fix: using reserved VLAN range reports error but ifreload returns 0
 172   * Fix: unable to set bridge-portmcrouter to "2"
 173   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
 174   * Fix: traditional bridge svi breaks when extra bridge added
 175   * Fix: github #39: addons: vrf: fix vrf slave link kind
 176   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
 177
 178  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
 179
 180 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
 181
 182   * Fix: ip[6]-forward attributes not set at boot
 183
 184  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
 185
 186 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
 187
 188   * Fix: python exception on macvlans address dump
 189   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
 190
 191  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
 192
 193 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
 194
 195   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
 196   * New. Enabled: bridge attributes, when removed reset to default
 197   * New. Enabled: vxlan attributes, when removed reset to default
 198   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
 199   * Fix: policy "iface_defaults" not supported for MTU
 200   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
 201   * Fix: warning for vlan reserved range
 202   * Fix: MTU handling on bridge SVIs
 203
 204  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
 205
 206 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
 207
 208   * New. Enabled: default policy for bridge MAC address
 209   * Fix: ethtool: don't set link speed and duplex if autoneg is on
 210
 211  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
 212
 213 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
 214
 215   * Fix: VRF: ssh session not killed on ifreload
 216
 217  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
 218
 219 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
 220
 221   * New. Enabled: mpls-enable attribute
 222   * New. Enabled: bond and bridge module moved to netlink configuration
 223   * New. Enabled: handle a mix of auto and specified vrf table ids
 224   * Fix: igmp attribute reset to defaults when removed from config
 225
 226  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
 227
 228 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
 229
 230   * Fix: link-down attribute not applied on slave ports
 231   * Fix: bug that prevented config of mtu below 1280
 232
 233  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
 234
 235 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
 236
 237   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 238   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 239   * New. Enabled: bond-lacp-rate support slow/fast argument
 240   * New. Enabled: ifquery --syntax-help: add support for json output
 241   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 242   * New. Enabled: address: add new attribute 'ip6-forward'
 243   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 244   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 245   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 246   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 247   * Fix: bond: add attribute bond-(up|down)delay
 248   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 249
 250  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 251
 252 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
 253
 254   * New. Enabled: support for bridge-learning attribute
 255
 256  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 257
 258 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
 259
 260   * New. Enabled: update link-speed values: add 25G and 50G
 261   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 262
 263  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 264
 265 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
 266
 267   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 268   * New. Enabled: syntax check to warn on common configuration mistakes
 269   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 270     and no upperifaces
 271   * Fix: fixes for MTU handling
 272   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 273
 274  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 275
 276 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
 277
 278   * Closes: github #14. add environment variables passed to user scripts
 279   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 280
 281  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 282
 283 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
 284
 285   * Fix: handling of EXISTS errors on address add
 286   * Fix: handling of mtu on addressvirtual macvlan devices
 287   * Fix: mako namespace handling
 288
 289  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 290
 291 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
 292
 293   * Performance improvements
 294   * New. Enabled: sbin: start-networking: support hotplug class from init script
 295   * New. Enabled: support for classical numerical bond modes
 296   * New. Enabled: extend ifquery support for mstpctl addons
 297   * New. Enabled: each addon may perform semantic and syntax checks by
 298     implementing a custom method
 299   * Fix: Support for address-virtual lines under a vrf slave
 300   * Fix: Defaults for link attributes were not applied
 301   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 302   * Fix: ifquery to extract vlan-id from iface if not preset
 303   * Fix: ifquery -c bridge pvid error on a valid config
 304
 305  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 306
 307 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
 308
 309   * Fix: Interface configuration parsing error when keyword vlan
 310     is the interface name.
 311
 312  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 313
 314 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
 315
 316   * Fix: checks for invalid address-virtual attributes
 317   * New. Deprecated: `mstpctl-stp` attribute
 318   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 319   * New. Enabled: addon module for configuring vrf
 320   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 321     an untagged bridge is not configured
 322   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 323   * New. Enabled: introduce checks for reserved vrf table names
 324   * New. Enabled: ifquery: new option '--with-defaults' to include default
 325     attributes
 326   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 327   * New. Enabled: vrf awareness in dhcp addon module
 328
 329  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 330
 331 ifupdown2 (1.1) unstable; urgency=low
 332
 333   * Initial release.
 334
 335  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700