]> git.proxmox.com Git - mirror_ifupdown2.git/blob - debian/changelog
debian: changelog: update 3.0.0-1 entry
[mirror_ifupdown2.git] / debian / changelog
1 ifupdown2 (3.0.0-1) unstable; urgency=medium
2
3 * New. Enabled: python3 support
4 * New. Enabled: attribute alias support
5 * New. Enabled: support for marking interfaces as mgmt interfaces
6 * Fix: dry-run exceptions
7 * Fix: bond enslavement ordering
8 * Fix: ifquery-running: incorrect displayed data
9 * Fix: set bridge MTU after bridge creation
10 * Fix: tunnel configuration compatibility with ifupdown1
11 * Fix: process MTU before addrgen
12 * Fix: mstpctl: check mstpctl-stp and bridge-stp and fix bridge cache update
13 * Removing python-argcomplete dependency
14
15 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 14 Apr 2020 19:10:49 +0200
16
17 ifupdown2 (2.0.2-1) unstable; urgency=medium
18
19 * New: addons: ethtool: add support for "ethtool_ignore_errors" policy
20 * New: addons: dhcp: if mgmt vrf context exec dhclient in default vrf
21 * Fix: nlpacket: don't raise an exception on 24 bytes mac address (#140)
22 * Fix: IFLA_INFO_KIND: decode tunnel data
23 * Fix: XFRM for 2.x release
24 * Fix: addons.conf: remove duplicate entry for tunnel pre-up
25
26 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 04 Mar 2020 23:42:42 +0100
27
28 ifupdown2 (2.0.1-1) unstable; urgency=medium
29
30 * New argv option: --nldebug to print netlink debug message
31 * New: ethtool: nics (GRO, LRO GSO, TSO, UFO, TX and RX) offload attributes
32
33 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 31 Dec 2019 15:21:06 +0100
34
35 ifupdown2 (2.0.0-1) unstable; urgency=medium
36
37 * Introduction of the live netlink cache
38 * Refactoring and PEP8 fixes
39 * Install systemd ifupdown2.netowrking.service and ifup.service
40 * Addons: bond: bond-primary attributes (closes: #9)
41 * Addons: address-virtual: vrrp support
42 * Addons: address: add arp-accept option
43 * Addons: tunnel: adding "tunnel-" prefix to every attributes
44 * Loopback interface won't go down (unless link-down yes)
45 * Macvlans (address-virtual) can now be configured without ips
46 * Add support for vxlan multicast group (vxlan-mcastgrp)
47 * New sets of poliicies:
48 - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
49 - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
50 - bridge policy for vxlan port:
51 vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
52
53 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 01 Oct 2019 23:42:42 +0200
54
55 ifupdown2 (1.2.8-1) unstable; urgency=medium
56
57 * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
58
59 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 11 Jul 2019 23:42:42 +0200
60
61 ifupdown2 (1.2.7-1) unstable; urgency=medium
62
63 * New: Add bridge-ports-condone-regex option (closes #117)
64
65 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jul 2019 23:42:42 +0200
66
67 ifupdown2 (1.2.6-1) unstable; urgency=medium
68
69 * Fix: AttributeError exception in bridge module (fixes #90)
70 * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
71 * New. policymanager: merge module policy instead of overriding duplicates
72 * New: set default mtu on user defined device (via link-type)
73 * New: add support for vxlan-ttl attribute
74 * New: add support for vrrp attribute
75 * New: introduce new bridge policy:
76 "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
77 * New: link-down yes will also down macvlans
78 * New: XFRM addon module
79 * New: Add policy to wait for IPv6 link local address to be available
80
81 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 23 Jun 2019 23:42:42 -1000
82
83 ifupdown2 (1.2.5-1) unstable; urgency=medium
84
85 * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
86 * Fix: debian: install sysvinit script (closes: #918775)
87 * Fix: debian: postinst: remove diversion after upgrade from stretch
88 (closes: #919443)
89
90 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 21 Jan 2019 23:42:42 +8000
91
92 ifupdown2 (1.2.4-1) unstable; urgency=medium
93
94 * Fix: statemanager directory path customization via ifupdown2.conf
95 (closes: #918832)
96
97 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 11 Jan 2019 23:42:42 +0000
98
99 ifupdown2 (1.2.3-1) unstable; urgency=medium
100
101 * Fix: log: use stderr if syslog initialization fails (closes: #917534)
102
103 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 30 Dec 2018 23:42:42 +0700
104
105 ifupdown2 (1.2.2-1) unstable; urgency=medium
106
107 * New: add support for B.A.T.M.A.N. adv. attributes
108 * New: support for new iproute2 format (bridge vlan show)
109 * New: add new checks for existing device with vxlan attributes
110 * Fix: pypi install: local addons modules should be loaded first
111 * Fix: link-down yes on vrf slaves
112 * Fix: nlmanager: use strerror to format kernel error
113 * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
114 * Fix: man: remove non-implemented -m option (closes: #905572)
115
116 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 20 Dec 2018 23:42:42 +0000
117
118 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
119
120 * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
121 * Fix: Link down does not work on any intf configured in a VRF
122 * Add: ethtool: add link-speed 10 to valid values array
123 * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
124 * Add: warning when bridge attribute are used on non br[port] intf
125 * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
126 * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
127 * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
128 * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
129 * addressvirtual module_globals "addressvirtual_with_route_metric" policy
130 * Closes: ethtool: link-fec: local variable 'fec_attrs'
131 referencede before assignment
132 * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
133 an interface
134
135 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200
136
137 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
138
139 * Package architecture refactoring and cleanups
140 * Package can be build/install as debian, pip or rpm package
141 * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
142 * VRF slaves: add support for link-down yes
143 * addressvirtual: macvlan: add default metric to ip4 and ip6
144 * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
145 * Closes #58: address addon "vlan_aware_bridge_address_support" policy
146 * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
147 * Configuration for IPv6 link-local auto-generate mode, new attributes:
148 ipv6-addrgen (address addon)
149 address-virtual-ipv6-addrgen (addressvirtual addon)
150
151 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200
152
153 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
154
155 * Fix: Link down does not work on SVI configured in a VRF
156 * Fix: ifreload causes MTU to drop on bridge SVIs
157 * Fix: addons: addressvirtual: check if SVI name is first in routing table
158 * Fix: ifreload error on deleting bond slaves from an already configured bond
159 * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
160 * Fix: ifupdown2 syntax check needed for vxlan interfaces
161 * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
162 * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
163 * Fix: using reserved VLAN range reports error but ifreload returns 0
164 * Fix: unable to set bridge-portmcrouter to "2"
165 * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
166 * Fix: traditional bridge svi breaks when extra bridge added
167 * Fix: github #39: addons: vrf: fix vrf slave link kind
168 * New. Enabled: addons: vxlan: add support for vxlan-port attribute
169
170 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200
171
172 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
173
174 * Fix: ip[6]-forward attributes not set at boot
175
176 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100
177
178 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
179
180 * Fix: python exception on macvlans address dump
181 * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
182
183 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100
184
185 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
186
187 * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
188 * New. Enabled: bridge attributes, when removed reset to default
189 * New. Enabled: vxlan attributes, when removed reset to default
190 * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
191 * Fix: policy "iface_defaults" not supported for MTU
192 * Fix: address module: handling of ipv4 & ipv6 (add/remove)
193 * Fix: warning for vlan reserved range
194 * Fix: MTU handling on bridge SVIs
195
196 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100
197
198 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
199
200 * New. Enabled: default policy for bridge MAC address
201 * Fix: ethtool: don't set link speed and duplex if autoneg is on
202
203 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200
204
205 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
206
207 * Fix: VRF: ssh session not killed on ifreload
208
209 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200
210
211 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
212
213 * New. Enabled: mpls-enable attribute
214 * New. Enabled: bond and bridge module moved to netlink configuration
215 * New. Enabled: handle a mix of auto and specified vrf table ids
216 * Fix: igmp attribute reset to defaults when removed from config
217
218 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200
219
220 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
221
222 * Fix: link-down attribute not applied on slave ports
223 * Fix: bug that prevented config of mtu below 1280
224
225 -- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700
226
227 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
228
229 * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
230 * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
231 * New. Enabled: bond-lacp-rate support slow/fast argument
232 * New. Enabled: ifquery --syntax-help: add support for json output
233 * New. Enabled: vlan: add new attribute 'vlan-protocol'
234 * New. Enabled: address: add new attribute 'ip6-forward'
235 * New. Enabled: bridge: add new attribute 'bridge-mcstats'
236 * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
237 * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
238 * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
239 * Fix: bond: add attribute bond-(up|down)delay
240 * Fix: bridge-vids: --syntax-check accepts legacy syntax
241
242 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200
243
244 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
245
246 * New. Enabled: support for bridge-learning attribute
247
248 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
249
250 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
251
252 * New. Enabled: update link-speed values: add 25G and 50G
253 * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
254
255 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
256
257 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
258
259 * New. Enabled: fix for inet and inet6 dhcp on the same interface
260 * New. Enabled: syntax check to warn on common configuration mistakes
261 * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
262 and no upperifaces
263 * Fix: fixes for MTU handling
264 * Fix: dhcpv6 fails if interface doesn't have link-local addr
265
266 -- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
267
268 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
269
270 * Closes: github #14. add environment variables passed to user scripts
271 * New. Enabled: addons may provide a list of ifupdown scripts to ignore
272
273 -- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
274
275 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
276
277 * Fix: handling of EXISTS errors on address add
278 * Fix: handling of mtu on addressvirtual macvlan devices
279 * Fix: mako namespace handling
280
281 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
282
283 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
284
285 * Performance improvements
286 * New. Enabled: sbin: start-networking: support hotplug class from init script
287 * New. Enabled: support for classical numerical bond modes
288 * New. Enabled: extend ifquery support for mstpctl addons
289 * New. Enabled: each addon may perform semantic and syntax checks by
290 implementing a custom method
291 * Fix: Support for address-virtual lines under a vrf slave
292 * Fix: Defaults for link attributes were not applied
293 * Fix: Disable IPv6 duplicate address detection on VRR interfaces
294 * Fix: ifquery to extract vlan-id from iface if not preset
295 * Fix: ifquery -c bridge pvid error on a valid config
296
297 -- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
298
299 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
300
301 * Fix: Interface configuration parsing error when keyword vlan
302 is the interface name.
303
304 -- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
305
306 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
307
308 * Fix: checks for invalid address-virtual attributes
309 * New. Deprecated: `mstpctl-stp` attribute
310 * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
311 * New. Enabled: addon module for configuring vrf
312 * New. Enabled: bridge: display warning when (in vlan unware bridge)
313 an untagged bridge is not configured
314 * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
315 * New. Enabled: introduce checks for reserved vrf table names
316 * New. Enabled: ifquery: new option '--with-defaults' to include default
317 attributes
318 * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
319 * New. Enabled: vrf awareness in dhcp addon module
320
321 -- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
322
323 ifupdown2 (1.1) unstable; urgency=low
324
325 * Initial release.
326
327 -- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700