debian/changelog

   1 ifupdown2 (1.2.2) unstable; urgency=medium
   2
   3   * New: Add support for B.A.T.M.A.N. adv. attributes
   4   * Support for new iproute2 format (bridge vlan show)
   5   * Pypi install: local addons modules should be loaded first
   6   * Fix: link-down yes on vrf slaves
   7   * Fix: nlmanager: use strerror to format kernel error
   8   * Add: new checks for existing device with vxlan attributes
   9   * Ethtool: FEC: translate None and NotSupported values to link-fec off
  10   * Man: remove non-implemented -m option (closes: #905572)
  11
  12  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 13 Dec 2018 23:42:42 -0800
  13
  14 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
  15
  16   * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
  17   * Fix: Link down does not work on any intf configured in a VRF
  18   * Add: ethtool: add link-speed 10 to valid values array
  19   * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
  20   * Add: warning when bridge attribute are used on non br[port] intf
  21   * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
  22   * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
  23   * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
  24   * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
  25   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
  26   * Closes: ethtool: link-fec: local variable 'fec_attrs'
  27             referencede before assignment
  28   * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
  29          an interface
  30
  31  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 24 Oct 2018 23:42:42 +0200
  32
  33 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
  34
  35   * Package architecture refactoring and cleanups
  36   * Package can be build/install as debian, pip or rpm package
  37   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
  38   * VRF slaves: add support for link-down yes
  39   * addressvirtual: macvlan: add default metric to ip4 and ip6
  40   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
  41   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
  42   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
  43   * Configuration for IPv6 link-local auto-generate mode, new attributes:
  44         ipv6-addrgen (address addon)
  45         address-virtual-ipv6-addrgen (addressvirtual addon)
  46
  47  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
  48
  49 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
  50
  51   * Fix: Link down does not work on SVI configured in a VRF
  52   * Fix: ifreload causes MTU to drop on bridge SVIs
  53   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  54   * Fix: ifreload error on deleting bond slaves from an already configured bond
  55   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  56   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  57   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  58   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  59   * Fix: using reserved VLAN range reports error but ifreload returns 0
  60   * Fix: unable to set bridge-portmcrouter to "2"
  61   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  62   * Fix: traditional bridge svi breaks when extra bridge added
  63   * Fix: github #39: addons: vrf: fix vrf slave link kind
  64   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  65
  66  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  67
  68 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
  69
  70   * Fix: ip[6]-forward attributes not set at boot
  71
  72  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  73
  74 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
  75
  76   * Fix: python exception on macvlans address dump
  77   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  78
  79  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
  80
  81 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
  82
  83   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
  84   * New. Enabled: bridge attributes, when removed reset to default
  85   * New. Enabled: vxlan attributes, when removed reset to default
  86   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
  87   * Fix: policy "iface_defaults" not supported for MTU
  88   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
  89   * Fix: warning for vlan reserved range
  90   * Fix: MTU handling on bridge SVIs
  91
  92  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
  93
  94 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
  95
  96   * New. Enabled: default policy for bridge MAC address
  97   * Fix: ethtool: don't set link speed and duplex if autoneg is on
  98
  99  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
 100
 101 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
 102
 103   * Fix: VRF: ssh session not killed on ifreload
 104
 105  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
 106
 107 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
 108
 109   * New. Enabled: mpls-enable attribute
 110   * New. Enabled: bond and bridge module moved to netlink configuration
 111   * New. Enabled: handle a mix of auto and specified vrf table ids
 112   * Fix: igmp attribute reset to defaults when removed from config
 113
 114  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
 115
 116 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
 117
 118   * Fix: link-down attribute not applied on slave ports
 119   * Fix: bug that prevented config of mtu below 1280
 120
 121  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
 122
 123 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
 124
 125   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 126   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 127   * New. Enabled: bond-lacp-rate support slow/fast argument
 128   * New. Enabled: ifquery --syntax-help: add support for json output
 129   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 130   * New. Enabled: address: add new attribute 'ip6-forward'
 131   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 132   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 133   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 134   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 135   * Fix: bond: add attribute bond-(up|down)delay
 136   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 137
 138  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 139
 140 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
 141
 142   * New. Enabled: support for bridge-learning attribute
 143
 144  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 145
 146 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
 147
 148   * New. Enabled: update link-speed values: add 25G and 50G
 149   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 150
 151  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 152
 153 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
 154
 155   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 156   * New. Enabled: syntax check to warn on common configuration mistakes
 157   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 158     and no upperifaces
 159   * Fix: fixes for MTU handling
 160   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 161
 162  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 163
 164 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
 165
 166   * Closes: github #14. add environment variables passed to user scripts
 167   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 168
 169  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 170
 171 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
 172
 173   * Fix: handling of EXISTS errors on address add
 174   * Fix: handling of mtu on addressvirtual macvlan devices
 175   * Fix: mako namespace handling
 176
 177  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 178
 179 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
 180
 181   * Performance improvements
 182   * New. Enabled: sbin: start-networking: support hotplug class from init script
 183   * New. Enabled: support for classical numerical bond modes
 184   * New. Enabled: extend ifquery support for mstpctl addons
 185   * New. Enabled: each addon may perform semantic and syntax checks by
 186     implementing a custom method
 187   * Fix: Support for address-virtual lines under a vrf slave
 188   * Fix: Defaults for link attributes were not applied
 189   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 190   * Fix: ifquery to extract vlan-id from iface if not preset
 191   * Fix: ifquery -c bridge pvid error on a valid config
 192
 193  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 194
 195 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
 196
 197   * Fix: Interface configuration parsing error when keyword vlan
 198     is the interface name.
 199
 200  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 201
 202 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
 203
 204   * Fix: checks for invalid address-virtual attributes
 205   * New. Deprecated: `mstpctl-stp` attribute
 206   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 207   * New. Enabled: addon module for configuring vrf
 208   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 209     an untagged bridge is not configured
 210   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 211   * New. Enabled: introduce checks for reserved vrf table names
 212   * New. Enabled: ifquery: new option '--with-defaults' to include default
 213     attributes
 214   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 215   * New. Enabled: vrf awareness in dhcp addon module
 216
 217  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 218
 219 ifupdown2 (1.1) unstable; urgency=low
 220
 221   * Initial release.
 222
 223  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700