debian/changelog

   1 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
   2   * Package architecture refactoring and cleanups
   3   * Package can be build/install as debian, pip or rpm package
   4   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
   5   * VRF slaves: add support for link-down yes
   6   * addressvirtual: macvlan: add default metric to ip4 and ip6
   7   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
   8   * Closes #58: ifupdown2.conf: vlan_aware_bridge_address_support on/off
   9   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
  10   * Configuration for IPv6 link-local auto-generate mode, new attributes:
  11         ipv6-addrgen (address addon)
  12         address-virtual-ipv6-addrgen (addressvirtual addon)
  13
  14  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Jun 2018 13:05:40 +0200
  15
  16 ifupdown2 (1.1.18) RELEASED; urgency=medium
  17
  18   * Fix: Link down does not work on SVI configured in a VRF
  19   * Fix: ifreload causes MTU to drop on bridge SVIs
  20   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  21   * Fix: ifreload error on deleting bond slaves from an already configured bond
  22   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  23   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  24   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  25   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  26   * Fix: using reserved VLAN range reports error but ifreload returns 0
  27   * Fix: unable to set bridge-portmcrouter to "2"
  28   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  29   * Fix: traditional bridge svi breaks when extra bridge added
  30   * Fix: github #39: addons: vrf: fix vrf slave link kind
  31   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  32
  33  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  34
  35 ifupdown2 (1.1.17) RELEASED; urgency=medium
  36
  37   * Fix: ip[6]-forward attributes not set at boot
  38
  39  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  40
  41 ifupdown2 (1.1.16) RELEASED; urgency=medium
  42
  43   * Fix: python exception on macvlans address dump
  44   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  45
  46  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
  47
  48 ifupdown2 (1.1.15) RELEASED; urgency=medium
  49
  50   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
  51   * New. Enabled: bridge attributes, when removed reset to default
  52   * New. Enabled: vxlan attributes, when removed reset to default
  53   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
  54   * Fix: policy "iface_defaults" not supported for MTU
  55   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
  56   * Fix: warning for vlan reserved range
  57   * Fix: MTU handling on bridge SVIs
  58
  59  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
  60
  61 ifupdown2 (1.1.14) RELEASED; urgency=medium
  62
  63   * New. Enabled: default policy for bridge MAC address
  64   * Fix: ethtool: don't set link speed and duplex if autoneg is on
  65
  66  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
  67
  68 ifupdown2 (1.1.13) RELEASED; urgency=medium
  69
  70   * Fix: VRF: ssh session not killed on ifreload
  71
  72  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
  73
  74 ifupdown2 (1.1.12) RELEASED; urgency=medium
  75
  76   * New. Enabled: mpls-enable attribute
  77   * New. Enabled: bond and bridge module moved to netlink configuration
  78   * New. Enabled: handle a mix of auto and specified vrf table ids
  79   * Fix: igmp attribute reset to defaults when removed from config
  80
  81  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
  82
  83 ifupdown2 (1.1.11) RELEASED; urgency=medium
  84
  85   * Fix: link-down attribute not applied on slave ports
  86   * Fix: bug that prevented config of mtu below 1280
  87
  88  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
  89
  90 ifupdown2 (1.1.10) RELEASED; urgency=medium
  91
  92   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
  93   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
  94   * New. Enabled: bond-lacp-rate support slow/fast argument
  95   * New. Enabled: ifquery --syntax-help: add support for json output
  96   * New. Enabled: vlan: add new attribute 'vlan-protocol'
  97   * New. Enabled: address: add new attribute 'ip6-forward'
  98   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
  99   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 100   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 101   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 102   * Fix: bond: add attribute bond-(up|down)delay
 103   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 104
 105  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 106
 107 ifupdown2 (1.1.9) RELEASED; urgency=medium
 108
 109   * New. Enabled: support for bridge-learning attribute
 110
 111  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 112
 113 ifupdown2 (1.1.8) RELEASED; urgency=medium
 114
 115   * New. Enabled: update link-speed values: add 25G and 50G
 116   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 117
 118  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 119
 120 ifupdown2 (1.1.7) RELEASED; urgency=medium
 121
 122   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 123   * New. Enabled: syntax check to warn on common configuration mistakes
 124   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 125     and no upperifaces
 126   * Fix: fixes for MTU handling
 127   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 128
 129  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 130
 131 ifupdown2 (1.1.6) RELEASED; urgency=medium
 132
 133   * Closes: github #14. add environment variables passed to user scripts
 134   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 135
 136  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 137
 138 ifupdown2 (1.1.5) RELEASED; urgency=medium
 139
 140   * Fix: handling of EXISTS errors on address add
 141   * Fix: handling of mtu on addressvirtual macvlan devices
 142   * Fix: mako namespace handling
 143
 144  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 145
 146 ifupdown2 (1.1.4) RELEASED; urgency=medium
 147
 148   * Performance improvements
 149   * New. Enabled: sbin: start-networking: support hotplug class from init script
 150   * New. Enabled: support for classical numerical bond modes
 151   * New. Enabled: extend ifquery support for mstpctl addons
 152   * New. Enabled: each addon may perform semantic and syntax checks by
 153     implementing a custom method
 154   * Fix: Support for address-virtual lines under a vrf slave
 155   * Fix: Defaults for link attributes were not applied
 156   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 157   * Fix: ifquery to extract vlan-id from iface if not preset
 158   * Fix: ifquery -c bridge pvid error on a valid config
 159
 160  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 161
 162 ifupdown2 (1.1.3) RELEASED; urgency=medium
 163
 164   * Fix: Interface configuration parsing error when keyword vlan
 165     is the interface name.
 166
 167  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 168
 169 ifupdown2 (1.1.2) RELEASED; urgency=medium
 170
 171   * Fix: checks for invalid address-virtual attributes
 172   * New. Deprecated: `mstpctl-stp` attribute
 173   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 174   * New. Enabled: addon module for configuring vrf
 175   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 176     an untagged bridge is not configured
 177   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 178   * New. Enabled: introduce checks for reserved vrf table names
 179   * New. Enabled: ifquery: new option '--with-defaults' to include default
 180     attributes
 181   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 182   * New. Enabled: vrf awareness in dhcp addon module
 183
 184  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 185
 186 ifupdown2 (1.1.0) unstable; urgency=low
 187
 188   * Initial release.
 189
 190  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700