debian/changelog

   1 ifupdown2 (2.0.0) UNRELEASED; urgency=medium
   2
   3   * Package architecture refactoring and cleanups
   4   * Package can be build/install as debian, pip or rpm package
   5   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
   6   * New. Enabled: traditional bridge support for mstpctl attributes
   7     (portautoedge, portrestrrole)
   8
   9  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 24 May 2018 15:42:42 +0200
  10
  11 ifupdown2 (1.1.18) RELEASED; urgency=medium
  12
  13   * Fix: Link down does not work on SVI configured in a VRF
  14   * Fix: ifreload causes MTU to drop on bridge SVIs
  15   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  16   * Fix: ifreload error on deleting bond slaves from an already configured bond
  17   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  18   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  19   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  20   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  21   * Fix: using reserved VLAN range reports error but ifreload returns 0
  22   * Fix: unable to set bridge-portmcrouter to "2"
  23   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  24   * Fix: traditional bridge svi breaks when extra bridge added
  25   * Fix: github #39: addons: vrf: fix vrf slave link kind
  26   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  27
  28  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  29
  30 ifupdown2 (1.1.17) RELEASED; urgency=medium
  31
  32   * Fix: ip[6]-forward attributes not set at boot
  33
  34  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  35
  36 ifupdown2 (1.1.16) RELEASED; urgency=medium
  37
  38   * Fix: python exception on macvlans address dump
  39   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  40
  41  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
  42
  43 ifupdown2 (1.1.15) RELEASED; urgency=medium
  44
  45   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
  46   * New. Enabled: bridge attributes, when removed reset to default
  47   * New. Enabled: vxlan attributes, when removed reset to default
  48   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
  49   * Fix: policy "iface_defaults" not supported for MTU
  50   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
  51   * Fix: warning for vlan reserved range
  52   * Fix: MTU handling on bridge SVIs
  53
  54  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
  55
  56 ifupdown2 (1.1.14) RELEASED; urgency=medium
  57
  58   * New. Enabled: default policy for bridge MAC address
  59   * Fix: ethtool: don't set link speed and duplex if autoneg is on
  60
  61  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
  62
  63 ifupdown2 (1.1.13) RELEASED; urgency=medium
  64
  65   * Fix: VRF: ssh session not killed on ifreload
  66
  67  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
  68
  69 ifupdown2 (1.1.12) RELEASED; urgency=medium
  70
  71   * New. Enabled: mpls-enable attribute
  72   * New. Enabled: bond and bridge module moved to netlink configuration
  73   * New. Enabled: handle a mix of auto and specified vrf table ids
  74   * Fix: igmp attribute reset to defaults when removed from config
  75
  76  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
  77
  78 ifupdown2 (1.1.11) RELEASED; urgency=medium
  79
  80   * Fix: link-down attribute not applied on slave ports
  81   * Fix: bug that prevented config of mtu below 1280
  82
  83  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
  84
  85 ifupdown2 (1.1.10) RELEASED; urgency=medium
  86
  87   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
  88   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
  89   * New. Enabled: bond-lacp-rate support slow/fast argument
  90   * New. Enabled: ifquery --syntax-help: add support for json output
  91   * New. Enabled: vlan: add new attribute 'vlan-protocol'
  92   * New. Enabled: address: add new attribute 'ip6-forward'
  93   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
  94   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
  95   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
  96   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
  97   * Fix: bond: add attribute bond-(up|down)delay
  98   * Fix: bridge-vids: --syntax-check accepts legacy syntax
  99
 100  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 101
 102 ifupdown2 (1.1.9) RELEASED; urgency=medium
 103
 104   * New. Enabled: support for bridge-learning attribute
 105
 106  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 107
 108 ifupdown2 (1.1.8) RELEASED; urgency=medium
 109
 110   * New. Enabled: update link-speed values: add 25G and 50G
 111   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 112
 113  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 114
 115 ifupdown2 (1.1.7) RELEASED; urgency=medium
 116
 117   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 118   * New. Enabled: syntax check to warn on common configuration mistakes
 119   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 120     and no upperifaces
 121   * Fix: fixes for MTU handling
 122   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 123
 124  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 125
 126 ifupdown2 (1.1.6) RELEASED; urgency=medium
 127
 128   * Closes: github #14. add environment variables passed to user scripts
 129   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 130
 131  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 132
 133 ifupdown2 (1.1.5) RELEASED; urgency=medium
 134
 135   * Fix: handling of EXISTS errors on address add
 136   * Fix: handling of mtu on addressvirtual macvlan devices
 137   * Fix: mako namespace handling
 138
 139  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 140
 141 ifupdown2 (1.1.4) RELEASED; urgency=medium
 142
 143   * Performance improvements
 144   * New. Enabled: sbin: start-networking: support hotplug class from init script
 145   * New. Enabled: support for classical numerical bond modes
 146   * New. Enabled: extend ifquery support for mstpctl addons
 147   * New. Enabled: each addon may perform semantic and syntax checks by
 148     implementing a custom method
 149   * Fix: Support for address-virtual lines under a vrf slave
 150   * Fix: Defaults for link attributes were not applied
 151   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 152   * Fix: ifquery to extract vlan-id from iface if not preset
 153   * Fix: ifquery -c bridge pvid error on a valid config
 154
 155  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 156
 157 ifupdown2 (1.1.3) RELEASED; urgency=medium
 158
 159   * Fix: Interface configuration parsing error when keyword vlan
 160     is the interface name.
 161
 162  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 163
 164 ifupdown2 (1.1.2) RELEASED; urgency=medium
 165
 166   * Fix: checks for invalid address-virtual attributes
 167   * New. Deprecated: `mstpctl-stp` attribute
 168   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 169   * New. Enabled: addon module for configuring vrf
 170   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 171     an untagged bridge is not configured
 172   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 173   * New. Enabled: introduce checks for reserved vrf table names
 174   * New. Enabled: ifquery: new option '--with-defaults' to include default
 175     attributes
 176   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 177   * New. Enabled: vrf awareness in dhcp addon module
 178
 179  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 180
 181 ifupdown2 (1.1.0) unstable; urgency=low
 182
 183   * Initial release.
 184
 185  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700