debian/changelog

   1 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
   2   * Package architecture refactoring and cleanups
   3   * Package can be build/install as debian, pip or rpm package
   4   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
   5   * New. Enabled: traditional bridge support for mstpctl attributes
   6     (portautoedge, portrestrrole)
   7
   8  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Jun 2018 13:05:40 +0200
   9
  10 ifupdown2 (1.1.18) RELEASED; urgency=medium
  11
  12   * Fix: Link down does not work on SVI configured in a VRF
  13   * Fix: ifreload causes MTU to drop on bridge SVIs
  14   * Fix: addons: addressvirtual: check if SVI name is first in routing table
  15   * Fix: ifreload error on deleting bond slaves from an already configured bond
  16   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
  17   * Fix: ifupdown2 syntax check needed for vxlan interfaces
  18   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
  19   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
  20   * Fix: using reserved VLAN range reports error but ifreload returns 0
  21   * Fix: unable to set bridge-portmcrouter to "2"
  22   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
  23   * Fix: traditional bridge svi breaks when extra bridge added
  24   * Fix: github #39: addons: vrf: fix vrf slave link kind
  25   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
  26
  27  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
  28
  29 ifupdown2 (1.1.17) RELEASED; urgency=medium
  30
  31   * Fix: ip[6]-forward attributes not set at boot
  32
  33  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
  34
  35 ifupdown2 (1.1.16) RELEASED; urgency=medium
  36
  37   * Fix: python exception on macvlans address dump
  38   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
  39
  40  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
  41
  42 ifupdown2 (1.1.15) RELEASED; urgency=medium
  43
  44   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
  45   * New. Enabled: bridge attributes, when removed reset to default
  46   * New. Enabled: vxlan attributes, when removed reset to default
  47   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
  48   * Fix: policy "iface_defaults" not supported for MTU
  49   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
  50   * Fix: warning for vlan reserved range
  51   * Fix: MTU handling on bridge SVIs
  52
  53  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
  54
  55 ifupdown2 (1.1.14) RELEASED; urgency=medium
  56
  57   * New. Enabled: default policy for bridge MAC address
  58   * Fix: ethtool: don't set link speed and duplex if autoneg is on
  59
  60  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
  61
  62 ifupdown2 (1.1.13) RELEASED; urgency=medium
  63
  64   * Fix: VRF: ssh session not killed on ifreload
  65
  66  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
  67
  68 ifupdown2 (1.1.12) RELEASED; urgency=medium
  69
  70   * New. Enabled: mpls-enable attribute
  71   * New. Enabled: bond and bridge module moved to netlink configuration
  72   * New. Enabled: handle a mix of auto and specified vrf table ids
  73   * Fix: igmp attribute reset to defaults when removed from config
  74
  75  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
  76
  77 ifupdown2 (1.1.11) RELEASED; urgency=medium
  78
  79   * Fix: link-down attribute not applied on slave ports
  80   * Fix: bug that prevented config of mtu below 1280
  81
  82  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
  83
  84 ifupdown2 (1.1.10) RELEASED; urgency=medium
  85
  86   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
  87   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
  88   * New. Enabled: bond-lacp-rate support slow/fast argument
  89   * New. Enabled: ifquery --syntax-help: add support for json output
  90   * New. Enabled: vlan: add new attribute 'vlan-protocol'
  91   * New. Enabled: address: add new attribute 'ip6-forward'
  92   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
  93   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
  94   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
  95   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
  96   * Fix: bond: add attribute bond-(up|down)delay
  97   * Fix: bridge-vids: --syntax-check accepts legacy syntax
  98
  99  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 100
 101 ifupdown2 (1.1.9) RELEASED; urgency=medium
 102
 103   * New. Enabled: support for bridge-learning attribute
 104
 105  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 106
 107 ifupdown2 (1.1.8) RELEASED; urgency=medium
 108
 109   * New. Enabled: update link-speed values: add 25G and 50G
 110   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 111
 112  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 113
 114 ifupdown2 (1.1.7) RELEASED; urgency=medium
 115
 116   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 117   * New. Enabled: syntax check to warn on common configuration mistakes
 118   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 119     and no upperifaces
 120   * Fix: fixes for MTU handling
 121   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 122
 123  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 124
 125 ifupdown2 (1.1.6) RELEASED; urgency=medium
 126
 127   * Closes: github #14. add environment variables passed to user scripts
 128   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 129
 130  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 131
 132 ifupdown2 (1.1.5) RELEASED; urgency=medium
 133
 134   * Fix: handling of EXISTS errors on address add
 135   * Fix: handling of mtu on addressvirtual macvlan devices
 136   * Fix: mako namespace handling
 137
 138  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 139
 140 ifupdown2 (1.1.4) RELEASED; urgency=medium
 141
 142   * Performance improvements
 143   * New. Enabled: sbin: start-networking: support hotplug class from init script
 144   * New. Enabled: support for classical numerical bond modes
 145   * New. Enabled: extend ifquery support for mstpctl addons
 146   * New. Enabled: each addon may perform semantic and syntax checks by
 147     implementing a custom method
 148   * Fix: Support for address-virtual lines under a vrf slave
 149   * Fix: Defaults for link attributes were not applied
 150   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 151   * Fix: ifquery to extract vlan-id from iface if not preset
 152   * Fix: ifquery -c bridge pvid error on a valid config
 153
 154  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 155
 156 ifupdown2 (1.1.3) RELEASED; urgency=medium
 157
 158   * Fix: Interface configuration parsing error when keyword vlan
 159     is the interface name.
 160
 161  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 162
 163 ifupdown2 (1.1.2) RELEASED; urgency=medium
 164
 165   * Fix: checks for invalid address-virtual attributes
 166   * New. Deprecated: `mstpctl-stp` attribute
 167   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 168   * New. Enabled: addon module for configuring vrf
 169   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 170     an untagged bridge is not configured
 171   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 172   * New. Enabled: introduce checks for reserved vrf table names
 173   * New. Enabled: ifquery: new option '--with-defaults' to include default
 174     attributes
 175   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 176   * New. Enabled: vrf awareness in dhcp addon module
 177
 178  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 179
 180 ifupdown2 (1.1.0) unstable; urgency=low
 181
 182   * Initial release.
 183
 184  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700