8 * OVN has been removed from this repository. It now exists as a
9 separate project. You can find it at
10 https://github.com/ovn-org/ovn.git
12 * Add option to enable, disable and query TCP sequence checking in
14 * Add support for conntrack zone limits.
15 * Command "ovs-appctl dpctl/dump-flows" refactored to show subtable
16 miniflow bits for userspace datapath.
18 * New option 'use-need-wakeup' for netdev-afxdp to control enabling
19 of corresponding 'need_wakeup' flag in AF_XDP rings. Enabled by default
20 if supported by libbpf.
21 * 'xdpmode' option for netdev-afxdp renamed to 'xdp-mode'.
22 Modes also updated. New values:
23 native-with-zerocopy - former DRV
24 native - new one, DRV without zero-copy
26 best-effort [default] - new one, chooses the best available from
29 * DPDK pdump packet capture support disabled by default. New configure
30 option '--enable-dpdk-pdump' to enable it.
31 * DPDK pdump support is deprecated and will be removed in next releases.
32 * DPDK ring ports (dpdkr) are deprecated and will be removed in next
34 * Add support for DPDK 19.11.
35 * Add hardware offload support for output, drop, set of MAC, IPv4 and
36 TCP/UDP ports actions (experimental).
37 * Add experimental support for TSO.
39 * The rstp_statistics column in Port table will only be updated every
40 stats-update-interval configured in Open_vSwitch table.
42 * When ovsdb-server is running in backup mode, the default value of probe
43 interval is increased to 60 seconds for the connection to the
44 replication server. This value is configurable with the unixctl
45 command - ovsdb-server/set-active-ovsdb-server-probe-interval.
46 * ovsdb-server: New OVSDB extension to allow clients to specify row UUIDs.
47 - 'ovs-appctl dpctl/dump-flows' can now show offloaded=partial for
48 partially offloaded flows, dp:dpdk for fully offloaded by dpdk, and
49 type filter supports new filters: "dpdk" and "partially-offloaded".
54 * New option 'other_config:dpdk-socket-limit' to limit amount of
55 hugepage memory that can be used by DPDK.
56 * Add support for vHost Post-copy Live Migration (experimental).
57 * OVS validated with DPDK 18.11.2 which is the new minimal supported
59 * DPDK 18.11.1 and lower is no longer supported.
60 * New option 'tx-retries-max' to set the maximum amount of vhost tx
61 retries that can be made.
63 * All features required by OpenFlow 1.5 are now implemented, so
64 ovs-vswitchd now enables OpenFlow 1.5 by default (in addition to
66 * Removed support for OpenFlow 1.6 (draft), which ONF abandoned.
67 * New action "check_pkt_larger".
68 * Support for OpenFlow 1.5 "meter" action.
70 * ICMPv6 ND enhancements: support for match and set ND options type
72 * Add v4/v6 fragmentation support for conntrack.
73 * New ovs-appctl "dpctl/ipf-set-enabled" and "dpctl/ipf-set-disabled"
74 commands for userspace datapath conntrack fragmentation support.
75 * New "ovs-appctl dpctl/ipf-set-min-frag" command for userspace
76 datapath conntrack fragmentation support.
77 * New "ovs-appctl dpctl/ipf-set-max-nfrags" command for userspace datapath
78 conntrack fragmentation support.
79 * New "ovs-appctl dpctl/ipf-get-status" command for userspace datapath
80 conntrack fragmentation support.
81 * New action "check_pkt_len".
82 * Port configuration with "other-config:priority-tags" now has a mode
83 that retains the 802.1Q header even if VLAN and priority are both zero.
84 * 'ovs-appctl exit' now implies cleanup of non-internal ports in userspace
85 datapath regardless of '--cleanup' option. Use '--cleanup' to remove
87 * Removed experimental tag for SMC cache.
88 * Datapath classifer code refactored to enable function pointers to select
89 the lookup implementation at runtime. This enables specialization of
90 specific subtables based on the miniflow attributes, enhancing the
91 performance of the subtable search.
92 * Add Linux AF_XDP support through a new experimental netdev type "afxdp".
94 * OVSDB clients can now resynchronize with clustered servers much more
95 quickly after a brief disconnection, saving bandwidth and CPU time.
96 See section 4.1.15 of ovsdb-server(7) for details of related OVSDB
98 * Support to convert from cluster database to standalone database is now
99 available when clustered is down and cannot be revived using ovsdb-tool
100 . Check "Database Migration Commands" in ovsdb-tool man section.
103 - select IPAM mac_prefix in a random manner if not provided by the user
104 - add the capability to specify a static IPv4 and/or IPv6 address and
105 get the L2 one allocated dynamically using the following syntax:
106 ovn-nbctl lsp-set-addresses <port> "dynamic <IPv4 addr> <IPv6 addr>"
107 * Added the HA chassis group support.
108 * Added 'external' logical port support.
109 * Added Policy-based routing(PBR) support to create permit/deny/reroute
110 policies on the logical router. New table(Logical_Router_Policy) added in
111 OVN-NB schema. New "ovn-nbctl" commands to add/delete/list PBR policies.
112 * Support for Transport Zones, a way to separate chassis into
113 logical groups which results in tunnels only been formed between
114 members of the same transport zone(s).
115 * Support for IGMP Snooping and IGMP Querier.
116 - New QoS type "linux-netem" on Linux.
117 - Added support for TLS Server Name Indication (SNI).
119 * Support for the kernel versions 4.19.x and 4.20.x.
120 * Support for the kernel version 5.0.x.
121 * Add support for conntrack zone-based timeout policy.
122 - 'ovs-dpctl dump-flows' is no longer suitable for dumping offloaded flows.
123 'ovs-appctl dpctl/dump-flows' should be used instead.
124 - Add new argument '--offload-stats' for command
125 'ovs-appctl bridge/dump-flows',
126 so it can display offloaded packets statistics.
127 - Add L2 GRE tunnel over IPv6 support.
129 v2.11.0 - 19 Feb 2019
130 ---------------------
132 * OFPMP_TABLE_FEATURES_REQUEST can now modify table features.
134 * "mod-table" command can now change OpenFlow table names.
136 * OVN-SB schema changed: duplicated IP with same Encapsulation type
137 is not allowed any more. Please refer to
138 Documentation/intro/install/ovn-upgrades.rst for the instructions
139 in case there are problems encountered when upgrading from an earlier
141 * New support for IPSEC encrypted tunnels between hypervisors.
142 * ovn-ctl: allow passing user:group ids to the OVN daemons.
144 - add the capability to dynamically assign just L2 addresses
145 - add the capability to specify a static ip address and get the L2 one
146 allocated dynamically using the following syntax:
147 ovn-nbctl lsp-set-addresses <port> "dynamic <IP>"
149 * Add support for DPDK 18.11
150 * Add support for port representors.
151 - Userspace datapath:
152 * Add option for simple round-robin based Rxq to PMD assignment.
153 It can be set with pmd-rxq-assign.
154 * Add support for Auto load balancing of PMDs (experimental)
155 * Added new per-port configurable option to manage EMC:
156 'other_config:emc-enable'.
157 - Add 'symmetric_l3' hash function.
158 - OVS now honors 'updelay' and 'downdelay' for bonds with LACP configured.
160 * New configuration option "offload-rebalance", that enables dynamic
161 rebalancing of offloaded flows.
162 - The environment variable OVS_SYSLOG_METHOD, if set, is now used
163 as the default syslog method.
164 - The environment variable OVS_CTL_TIMEOUT, if set, is now used
165 as the default timeout for control utilities.
166 - The environment variable OVS_RESOLV_CONF, if set, is now used
167 as the DNS server configuration file.
169 * OVN packages are split from OVS packages. A new spec
170 file - ovn-fedora.spec.in is added to generate OVN packages.
172 * Support for the kernel versions 4.16.x, 4.17.x, and 4.18.x.
174 v2.10.0 - 18 Aug 2018
175 ---------------------
176 - ovs-vswitchd and utilities now support DNS names in OpenFlow and
179 * New options --l7 and --l7-len to "ofproto/trace" command.
180 * Previous versions gave OpenFlow tables default names of the form
181 "table#". These are not helpful names for the purpose of accepting
182 and displaying table names, so now tables by default have no names.
183 * The "null" interface type, deprecated since 2013, has been removed.
184 * Add minimum network namespace support for Linux.
185 * New command "lacp/show-stats"
187 * ovs-ofctl now accepts and display table names in place of numbers. By
188 default it always accepts names and in interactive use it displays them;
189 use --names or --no-names to override. See ovs-ofctl(8) for details.
190 - ovs-vsctl: New commands "add-bond-iface" and "del-bond-iface".
192 * New commands "ct-set-limits", "ct-del-limits", and "ct-get-limits".
194 * OFPT_ROLE_STATUS is now available in OpenFlow 1.3.
195 * OpenFlow 1.5 extensible statistics (OXS) now implemented.
196 * New OpenFlow 1.0 extensions for group support.
197 * Default selection method for select groups is now dp_hash with improved
200 * Add support for compiling OVS with the latest Linux 4.14 kernel.
201 * Added support for meters.
202 * Add support for conntrack zone limit.
204 * Implemented icmp4/icmp6/tcp_reset actions in order to drop the packet
205 and reply with a RST for TCP or ICMPv4/ICMPv6 unreachable message for
206 other IPv4/IPv6-based protocols whenever a reject ACL rule is hit.
207 * ACL match conditions can now match on Port_Groups as well as address
208 sets that are automatically generated by Port_Groups. ACLs can be
209 applied directly to Port_Groups as well.
210 * ovn-nbctl can now run as a daemon (long-lived, background process).
211 See ovn-nbctl(8) for details.
213 * New 'check-dpdk' Makefile target to run a new system testsuite.
214 See Testing topic for the details.
215 * Add LSC interrupt support for DPDK physical devices.
216 * Allow init to fail and record DPDK status/version in OVS database.
217 * Add experimental flow hardware offload support
218 * Support both shared and per port mempools for DPDK devices.
219 - Userspace datapath:
220 * Commands ovs-appctl dpif-netdev/pmd-*-show can now work on a single PMD
221 * Detailed PMD performance metrics available with new command
222 ovs-appctl dpif-netdev/pmd-perf-show
223 * Supervision of PMD performance metrics and logging of suspicious
225 * Add signature match cache (SMC) as experimental feature. When turned on,
226 it improves throughput when traffic has many more flows than EMC size.
228 * Implemented ERSPAN protocol (draft-foschiano-erspan-00.txt) for
229 both kernel datapath and userspace datapath.
230 * Added port-based and flow-based ERSPAN tunnel port support, added
231 OpenFlow rules matching ERSPAN fields. See ovs-fields(7).
233 * ovs-pki now generates x.509 version 3 certificate. The new format adds
234 subjectAltName field and sets its value the same as common name (CN).
238 - NSH implementation now conforms to latest draft (draft-ietf-sfc-nsh-28).
240 * Add a new action dec_nsh_ttl.
241 * Enable NSH support in kernel datapath.
242 - OVSDB has new, experimental support for database clustering:
243 * New high-level documentation in ovsdb(7).
244 * New file format documentation for developers in ovsdb(5).
245 * Protocol documentation moved from ovsdb-server(1) to ovsdb-server(7).
246 * ovsdb-server now supports online schema conversion via
247 "ovsdb-client convert".
248 * ovsdb-server now always hosts a built-in database named _Server. See
249 ovsdb-server(5) for more details.
250 * ovsdb-client: New "get-schema-cksum", "query", "backup", "restore",
251 and "wait" commands. New --timeout option.
252 * ovsdb-tool: New "create-cluster", "join-cluster", "db-cid", "db-sid",
253 "db-local-address", "db-is-clustered", "db-is-standalone", "db-name",
254 "schema-name", "compare-versions", and "check-cluster" commands.
255 * ovsdb-server: New ovs-appctl commands for managing clusters.
256 * ovs-sandbox: New support for clustered databases.
257 - ovs-vsctl and other commands that display data in tables now support a
258 --max-column-width option to limit column width.
259 - No longer slow-path traffic that sends to a controller. Applications,
260 such as OVN ACL logging, want to send a copy of a packet to a
261 controller while leaving the actual packet forwarding in the datapath.
263 * The "requested-chassis" option for a logical switch port now accepts a
264 chassis "hostname" in addition to a chassis "name".
266 - Added support to send IPv6 Router Advertisement packets in response to
267 the IPv6 Router Solicitation packets from the VIF ports.
268 - Added support to generate Neighbor Solicitation packets using the OVN
269 action 'nd_ns' to resolve unknown next hop MAC addresses for the
271 * Add support for QoS bandwidth limit with DPDK.
272 * ovn-ctl: New commands run_nb_ovsdb and run_sb_ovsdb.
273 * ovn-sbctl, ovn-nbctl: New options --leader-only, --no-leader-only.
275 * ct_clear action is now backed by kernel datapath. Support is probed for
278 * Add support for compiling OVS with the latest Linux 4.13 kernel
279 - ovs-dpctl and related ovs-appctl commands:
280 * "flush-conntrack" now accept a 5-tuple to delete a specific
281 connection tracking entry.
282 * New "ct-set-maxconns", "ct-get-maxconns", and "ct-get-nconns" commands
283 for userspace datapath.
284 - No longer send packets to the Linux TAP device if it's DOWN unless it is
285 in another networking namespace.
287 * Add support for DPDK v17.11
288 * Add support for vHost IOMMU
289 * New debug appctl command 'netdev-dpdk/get-mempool-info'.
290 * All the netdev-dpdk appctl commands described in ovs-vswitchd man page.
292 - DPDK physical ports now return custom set of "dropped", "error" and
293 "management" statistics.
294 - ovs-ofctl dump-ports command now prints new of set custom statistics
295 if available (for OpenFlow 1.4+).
296 * Switch from round-robin allocation of rxq to pmd assignments to a
297 utilization-based allocation.
298 * New appctl command 'dpif-netdev/pmd-rxq-rebalance' to rebalance rxq to
300 * Add rxq utilization of pmd to appctl 'dpif-netdev/pmd-rxq-show'.
301 * Add support for vHost dequeue zero copy (experimental).
302 - Userspace datapath:
303 * Output packet batching support.
305 * Datapath IDs may now be specified as 0x1 (etc.) instead of 16 digits.
306 * Configuring a controller, or unconfiguring all controllers, now deletes
307 all groups and meters (as well as all flows).
308 - New --enable-sparse configure option enables "sparse" checking by default.
309 - Added additional information to vhost-user status.
314 * ovs-ofctl can now accept and display port names in place of numbers. By
315 default it always accepts names and in interactive use it displays them;
316 use --names or --no-names to override. See ovs-ofctl(8) for details.
317 * "ovs-ofctl dump-flows" now accepts --no-stats to omit flow statistics.
318 - New ovs-dpctl command "ct-stats-show" to show connection tracking stats.
320 * Added support to set packet mark for tunnel endpoint using
321 `egress_pkt_mark` OVSDB option.
322 * When using Linux kernel datapath tunnels may be created using rtnetlink.
323 This will allow us to take advantage of new tunnel features without
324 having to make changes to the vport modules.
325 - EMC insertion probability is reduced to 1% and is configurable via
326 the new 'other_config:emc-insert-inv-prob' option.
328 * DPDK log messages redirected to OVS logging subsystem.
329 Log level can be changed in a usual OVS way using
330 'ovs-appctl vlog' commands for 'dpdk' module. Lower bound
331 still can be configured via extra arguments for DPDK EAL.
332 * dpdkvhostuser ports are marked as deprecated. They will be removed
333 in an upcoming release.
334 * Support for DPDK v17.05.1.
335 - IPFIX now provides additional counters:
336 * Total counters since metering process startup.
337 * Per-flow TCP flag counters.
338 * Multicast, broadcast, and unicast counters.
339 - New support for multiple VLANs (802.1ad or "QinQ"), including a new
340 "dot1q-tunnel" port VLAN mode.
341 - In ovn-vsctl and vtep-ctl, record UUIDs in commands may now be
342 abbreviated to 4 hex digits.
343 - Userspace Datapath:
344 * Added NAT support for userspace datapath.
345 * Added FTP and TFTP support with NAT for userspace datapath.
346 * Experimental NSH (Network Service Header) support in userspace datapath.
348 * New built-in DNS support.
349 * IPAM for IPv4 can now exclude user-defined addresses from assignment.
350 * IPAM can now assign IPv6 addresses.
351 * Make the DHCPv4 router setting optional.
352 * Gratuitous ARP for NAT addresses on a distributed logical router.
353 * Allow ovn-controller SSL configuration to be obtained from vswitchd
355 * ovn-trace now has basic support for tracing distributed firewalls.
356 * In ovn-nbctl and ovn-sbctl, record UUIDs in commands may now be
357 abbreviated to 4 hex digits.
358 * "ovn-sbctl lflow-list" can now print OpenFlow flows that correspond
360 * Now uses OVSDB RBAC support to reduce impact of compromised hypervisors.
361 * Multiple chassis may now be specified for L3 gateways. When more than
362 one chassis is specified, OVN will manage high availability for that
364 * Add support for ACL logging.
365 * ovn-northd now has native support for active-standby high availability.
366 - Tracing with ofproto/trace now traces through recirculation.
368 * New support for role-based access control (see ovsdb-server(1)).
369 - New commands 'stp/show' and 'rstp/show' (see ovs-vswitchd(8)).
371 * All features required by OpenFlow 1.4 are now implemented, so
372 ovs-vswitchd now enables OpenFlow 1.4 by default (in addition to
373 OpenFlow 1.0 to 1.3).
374 * Increased support for OpenFlow 1.6 (draft).
375 * Bundles now support hashing by just nw_src or nw_dst.
376 * The "learn" action now supports a "limit" option (see ovs-ofctl(8)).
377 * The port status bit OFPPS_LIVE now reflects link aliveness.
378 * OpenFlow 1.5 packet-out is now supported.
379 * Support for OpenFlow 1.5 field packet_type and packet-type-aware
381 * Added generic encap and decap actions (EXT-382).
382 First supported use case is encap/decap for Ethernet.
383 * Added NSH (Network Service Header) support in userspace
384 Used generic encap and decap actions to implement encapsulation and
385 decapsulation of NSH header.
386 IETF NSH draft - https://datatracker.ietf.org/doc/draft-ietf-sfc-nsh/
387 * Conntrack state is only available to the processing path that
388 follows the "recirc_table" argument of the ct() action. Starting
389 in OVS 2.8, this state is now cleared for the current processing
390 path whenever ct() is called.
392 * OVN services are no longer restarted automatically after upgrade.
393 * ovs-vswitchd and ovsdb-server run as non-root users by default.
394 - Add --cleanup option to command 'ovs-appctl exit' (see ovs-vswitchd(8)).
396 * Use new tunnel port option "packet_type" to configure L2 vs. L3.
397 * In conjunction with PTAP tunnel ports can handle a mix of L2 and L3
399 * New vxlan tunnel extension "gpe" to support VXLAN-GPE tunnels.
400 * New support for non-Ethernet (L3) payloads in GRE and VXLAN-GPE.
401 - The BFD detection multiplier is now user-configurable.
402 - Add experimental support for hardware offloading
403 * HW offloading is disabled by default.
404 * HW offloading is done through the TC interface.
405 - IPv6 link local addresses are now supported on Linux. Use % to designate
409 ---------------------
410 - Utilities and daemons that support SSL now allow protocols and
411 ciphers to be configured with --ssl-protocols and --ssl-ciphers.
413 * QoS is now implemented via egress shaping rather than ingress policing.
414 * DSCP marking is now supported, via the new northbound QoS table.
415 * IPAM now supports fixed MAC addresses.
416 * Support for source IP address based routing.
418 - New --ovs option to also print OpenFlow flows.
419 - put_dhcp_opts and put_dhcp_optsv6 actions may now be traced.
420 * Support for managing SSL and remote connection configuration in
421 northbound and southbound databases.
422 * TCP connections to northbound and southbound databases are no
423 longer enabled by default and must be explicitly configured.
424 See documentation for ovn-sbctl/ovn-nbctl "set-connection"
425 command or the ovn-ctl "--db-sb-create-insecure-remote" and
426 "--db-nb-create-insecure-remote" command-line options for
427 information regarding remote connection configuration.
428 * New appctl "inject-pkt" command in ovn-controller that allows
429 packets to be injected into the connected OVS instance.
430 * Distributed logical routers may now be connected directly to
431 logical switches with localnet ports, by specifying a
432 "redirect-chassis" on the distributed gateway port of the
433 logical router. NAT rules may be specified directly on the
434 distributed logical router, and are handled either centrally on
435 the "redirect-chassis", or in many cases are handled locally on
436 the hypervisor where the corresponding logical port resides.
437 Gratuitous ARP for NAT addresses on a distributed logical
438 router is not yet supported, but will be added in a future
440 - Fixed regression in table stats maintenance introduced in OVS
441 2.3.0, wherein the number of OpenFlow table hits and misses was
444 * OFPT_PACKET_OUT messages are now supported in bundles.
445 * A new "selection_method=dp_hash" type for OpenFlow select group
446 bucket selection that uses the datapath computed 5-tuple hash
447 without making datapath flows match the 5-tuple fields, which
448 is useful for more efficient load balancing, for example. This
449 uses the Netronome extension to OpenFlow 1.5+ that allows
450 control over the OpenFlow select groups selection method. See
451 "selection_method" and related options in ovs-ofctl(8) for
453 * The "sample" action now supports "ingress" and "egress" options.
454 * The "ct" action now supports the TFTP ALG where support is available.
455 * New actions "clone" and "ct_clear".
456 * The "meter" action is now supported in the userspace datapath.
458 * 'bundle' command now supports packet-out messages.
459 * New syntax for 'ovs-ofctl packet-out' command, which uses the
460 same string parser as the 'bundle' command. The old 'packet-out'
461 syntax is deprecated and will be removed in a later OVS
463 * New unixctl "ofctl/packet-out" command, which can be used to
464 instruct a flow monitor to issue OpenFlow packet-out messages.
466 * Remote connections can now be made read-only (see ovsdb-server(1)).
468 * TLV mappings for protocols such as Geneve are now segregated on
469 a per-OpenFlow bridge basis rather than globally. (The interface
471 * Removed support for IPsec tunnels.
473 * New option 'n_rxq_desc' and 'n_txq_desc' fields for DPDK interfaces
474 which set the number of rx and tx descriptors to use for the given port.
475 * Support for DPDK v16.11.
476 * Support for rx checksum offload. Refer DPDK HOWTO for details.
477 * Port Hotplug is now supported.
478 * DPDK physical ports can now have arbitrary names. The PCI address of
479 the device must be set using the 'dpdk-devargs' option. Compatibility
480 with the old dpdk<portid> naming scheme is broken, and as such a
481 device will not be available for use until a valid dpdk-devargs is
483 * Virtual DPDK Poll Mode Driver (vdev PMD) support.
484 * Removed experimental tag.
486 * A package upgrade does not automatically restart OVS service.
487 - ovs-vswitchd/ovs-vsctl:
488 * Ports now have a "protected" flag. Protected ports can not forward
489 frames to other protected ports. Unprotected ports can receive and
490 forward frames to protected and other unprotected ports.
491 - ovs-vsctl, ovn-nbctl, ovn-sbctl, vtep-ctl:
492 * Database commands now accept integer ranges, e.g. "set port
493 eth0 trunks=1-10" to enable trunking VLANs 1 to 10.
496 ---------------------
497 - First supported release of OVN. See ovn-architecture(7) for more
500 * New "monitor_cond" "monitor_cond_update" and "update2" extensions to
503 * OpenFlow 1.3+ bundles now expire after 10 seconds since the
504 last time the bundle was either opened, modified, or closed.
505 * OpenFlow 1.3 Extension 230, adding OpenFlow Bundles support, is
507 * OpenFlow 1.3+ bundles are now supported for group mods as well as
508 flow mods and port mods. Both 'atomic' and 'ordered' bundle
509 flags are supported for group mods as well as flow mods.
510 * Internal OpenFlow rule representation for load and set-field
511 actions is now much more memory efficient. For a complex flow
512 table this can reduce rule memory consumption by 40%.
513 * Bundles are now much more memory efficient than in OVS 2.5.
514 Together with memory efficiency improvements in OpenFlow rule
515 representation, the peak OVS resident memory use during a
516 bundle commit for large complex set of flow mods can be only
517 25% of that in OVS 2.5 (4x lower).
518 * OpenFlow 1.1+ OFPT_QUEUE_GET_CONFIG_REQUEST now supports OFPP_ANY.
519 * OpenFlow 1.4+ OFPMP_QUEUE_DESC is now supported.
520 * OpenFlow 1.4+ OFPT_TABLE_STATUS is now supported.
521 * New property-based packet-in message format NXT_PACKET_IN2 with support
522 for arbitrary user-provided data and for serializing flow table
523 traversal into a continuation for later resumption.
524 * New extension message NXT_SET_ASYNC_CONFIG2 to allow OpenFlow 1.4-like
525 control over asynchronous messages in earlier versions of OpenFlow.
526 * New OpenFlow extension NXM_NX_MPLS_TTL to provide access to MPLS TTL.
527 * New output option, output(port=N,max_len=M), to allow truncating a
528 packet to size M bytes when outputting to port N.
529 * New command OFPGC_ADD_OR_MOD for OFPT_GROUP_MOD message that adds a
530 new group or modifies an existing groups
531 * The optional OpenFlow packet buffering feature is deprecated in
532 this release, and will be removed in the next OVS release
533 (2.7). After the change OVS always sends the 'buffer_id' as
534 0xffffffff in packet-in messages and will send an error
535 response if any other value of this field is included in
536 packet-out and flow mod sent by a controller. Controllers are
537 already expected to work properly in cases where the switch can
538 not buffer packets, so this change should not affect existing
540 * New OpenFlow extension NXT_CT_FLUSH_ZONE to flush conntrack zones.
541 - Improved OpenFlow version compatibility for actions:
542 * New OpenFlow extension to support the "group" action in OpenFlow 1.0.
543 * OpenFlow 1.0 "enqueue" action now properly translated to OpenFlow 1.1+.
544 * OpenFlow 1.1 "mod_nw_ecn" and OpenFlow 1.1+ "mod_nw_ttl" actions now
545 properly translated to OpenFlow 1.0.
547 * queue-get-config command now allows a queue ID to be specified.
548 * '--bundle' option can now be used with OpenFlow 1.3 and with group mods.
549 * New "bundle" command allows executing a mixture of flow and group mods
550 as a single atomic transaction.
551 * New option "--color" to produce colorized output for some commands.
552 * New option '--may-create' to use OFPGC_ADD_OR_MOD in mod-group command.
554 * New "sampling_port" option for "sample" action to allow sampling
555 ingress and egress tunnel metadata with IPFIX.
556 * New ovs-ofctl commands "dump-ipfix-bridge" and "dump-ipfix-flow" to
557 dump bridge IPFIX statistics and flow based IPFIX statistics.
558 * New setting other-config:virtual_obs_id to add an arbitrary string
561 * OVS Linux datapath now implements Conntrack NAT action with all
562 supported Linux kernels.
563 * Support for truncate action.
564 * New QoS type "linux-noop" that prevents Open vSwitch from trying to
565 manage QoS for a given port (useful when other software manages QoS).
567 * New option "n_rxq" for PMD interfaces.
568 Old 'other_config:n-dpdk-rxqs' is no longer supported.
569 Not supported by vHost interfaces. For them number of rx and tx queues
570 is applied from connected virtio device.
571 * New 'other_config:pmd-rxq-affinity' field for PMD interfaces, that
572 allows to pin port's rx queues to desired cores.
573 * New appctl command 'dpif-netdev/pmd-rxq-show' to check the port/rxq
575 * Type of log messages from PMD threads changed from INFO to DBG.
576 * QoS functionality with sample egress-policer implementation.
577 * The mechanism for configuring DPDK has changed to use database
578 * Sensible defaults have been introduced for many of the required
579 configuration options
580 * DB entries have been added for many of the DPDK EAL command line
581 arguments. Additional arguments can be passed via the dpdk-extra
583 * Add ingress policing functionality.
584 * PMD threads servicing vHost User ports can now come from the NUMA
585 node that device memory is located on if CONFIG_RTE_LIBRTE_VHOST_NUMA
587 * Basic connection tracking for the userspace datapath (no ALG,
588 fragmentation or NAT support yet)
589 * Support for DPDK 16.07
590 * Optional support for DPDK pdump enabled.
591 * Jumbo frame support
592 * Remove dpdkvhostcuse port type.
593 * OVS client mode for vHost and vHost reconnect (Requires QEMU 2.7)
594 * 'dpdkvhostuserclient' port type.
595 - Increase number of registers to 16.
596 - ovs-benchmark: This utility has been removed due to lack of use and
599 * New "vlog/close" command.
601 * Added the ability to selectively start the forwarding and database
602 functions (ovs-vswitchd and ovsdb-server, respectively).
604 * Remove max number of sessions limit, to enable connection scaling
607 * Added support for Python 3.4+ in addition to existing support
610 * Introduced SELinux policy package.
611 - Datapath Linux kernel compatibility.
612 * Dropped support for kernel older than 3.10.
613 * Removed VLAN splinters feature.
614 * Datapath supports kernel upto 4.7.
616 * Flow based tunnel match and action can be used for IPv6 address using
617 tun_ipv6_src, tun_ipv6_dst fields.
618 * Added support for IPv6 tunnels, for details checkout FAQ.
619 * Deprecated support for IPsec tunnels ports.
620 - A wrapper script, 'ovs-tcpdump', to easily port-mirror an OVS port and
622 - Introduce --no-self-confinement flag that allows daemons to work with
623 sockets outside their run directory.
624 - ovs-pki: Changed message digest algorithm from SHA-1 to SHA-512 because
625 SHA-1 is no longer secure and some operating systems have started to
626 disable it in OpenSSL.
627 - Add 'mtu_request' column to the Interface table. It can be used to
628 configure the MTU of the ports.
631 - Using openvswitch module in conjunction with upstream Linux tunnels:
632 * When using the openvswitch module distributed with OVS against kernel
633 versions 4.4 to 4.6, the openvswitch module cannot be loaded or used at
634 the same time as "ip_gre".
635 - Conntrack FTP ALGs: When using the openvswitch module distributed with
636 OVS, particular Linux distribution kernels versions may provide diminished
637 functionality. This typically affects active FTP data connections when
638 using "actions=ct(alg=ftp),..." in flow tables. Specifically:
639 * Centos 7.1 kernels (3.10.0-2xx) kernels are unable to correctly set
640 up expectations for FTP data connections in multiple zones,
641 eg "actions=ct(zone=1,alg=ftp),ct(zone=2,alg=ftp),...". Executing the
642 "ct" action for subsequent data connections may fail to determine that
643 the data connection is "related" to an existing connection.
644 * Centos 7.2 kernels (3.10.0-3xx) kernels may not establish FTP ALG state
645 correctly for NATed connections. As a result, flows that perform NAT,
646 eg "actions=ct(nat,ftp=alg,table=1),..." may fail to NAT the packet,
647 and will populate the "ct_state=inv" bit in the flow.
651 ---------------------
652 - Dropped support for Python older than version 2.7. As a consequence,
653 using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
654 have Python 2.4) requires first installing Python 2.7.
656 * Group chaining (where one OpenFlow group triggers another) is
658 * OpenFlow 1.4+ "importance" is now considered for flow eviction.
659 * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
660 * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
661 * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
662 * Allow modifying the ICMPv4/ICMPv6 type and code fields.
663 * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
666 * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
668 * Geneve tunnels can now match and set options and the OAM bit.
669 * The nonstandard GRE64 tunnel extension has been dropped.
670 - Support Multicast Listener Discovery (MLDv1 and MLDv2).
671 - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
672 - sFlow agent now reports tunnel and MPLS structures.
673 - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile
674 targets to run a new system testsuite. These tests can be run inside
675 a Vagrant box. See INSTALL.md for details
676 - Mark --syslog-target argument as deprecated. It will be removed in
677 the next OVS release.
678 - Added --user option to all daemons
679 - Add support for connection tracking through the new "ct" action
680 and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields. Only
681 available on Linux kernels with the connection tracking module loaded.
682 - Add experimental version of OVN. OVN, the Open Virtual Network, is a
683 system to support virtual network abstraction. OVN complements the
684 existing capabilities of OVS to add native support for virtual network
685 abstractions, such as virtual L2 and L3 overlays and security groups.
687 * DPDK ports may now be created via network scripts (see README.RHEL).
690 * Added multiqueue support to vhost-user
691 * Note: QEMU 2.5+ required for multiqueue support
694 ---------------------
695 - Flow table modifications are now atomic, meaning that each packet
696 now sees a coherent version of the OpenFlow pipeline. For
697 example, if a controller removes all flows with a single OpenFlow
698 "flow_mod", no packet sees an intermediate version of the OpenFlow
699 pipeline where only some of the flows have been deleted.
700 - Added support for SFQ, FQ_CoDel and CoDel qdiscs.
701 - Add bash command-line completion support for ovs-vsctl Please check
702 utilities/ovs-command-compgen.INSTALL.md for how to use.
703 - The MAC learning feature now includes per-port fairness to mitigate
704 MAC flooding attacks.
705 - New support for a "conjunctive match" OpenFlow extension, which
706 allows constructing OpenFlow matches of the form "field1 in
707 {a,b,c...} AND field2 in {d,e,f...}" and generalizations. For details,
708 see documentation for the "conjunction" action in ovs-ofctl(8).
709 - Add bash command-line completion support for ovs-appctl/ovs-dpctl/
710 ovs-ofctl/ovsdb-tool commands. Please check
711 utilities/ovs-command-compgen.INSTALL.md for how to use.
712 - The "learn" action supports a new flag "delete_learned" that causes
713 the learned flows to be deleted when the flow with the "learn" action
715 - Basic support for the Geneve tunneling protocol. It is not yet
716 possible to generate or match options. This is planned for a future
717 release. The protocol is documented at
718 http://tools.ietf.org/html/draft-gross-geneve-00
719 - The OVS database now reports controller rate limiting statistics.
720 - sflow now exports information about LACP-based bonds, port names, and
721 OpenFlow port numbers, as well as datapath performance counters.
722 - ovs-dpctl functionality is now available for datapaths integrated
723 into ovs-vswitchd, via ovs-appctl. Some existing ovs-appctl
724 commands are now redundant and will be removed in a future
725 release. See ovs-vswitchd(8) for details.
727 * OpenFlow 1.4 bundles are now supported for flow mods and port
728 mods. For flow mods, both 'atomic' and 'ordered' bundle flags
729 are trivially supported, as all bundled messages are executed
730 in the order they were added and all flow table modifications
731 are now atomic to the datapath. Port mods may not appear in
732 atomic bundles, as port status modifications are not atomic.
733 * IPv6 flow label and neighbor discovery fields are now modifiable.
734 * OpenFlow 1.5 extended registers are now supported.
735 * The OpenFlow 1.5 actset_output field is now supported.
736 * OpenFlow 1.5 Copy-Field action is now supported.
737 * OpenFlow 1.5 masked Set-Field action is now supported.
738 * OpenFlow 1.3+ table features requests are now supported (read-only).
739 * Nicira extension "move" actions may now be included in action sets.
740 * "resubmit" actions may now be included in action sets. The resubmit
741 is executed last, and only if the action set has no "output" or "group"
743 * OpenFlow 1.4+ flow "importance" is now maintained in the flow table.
744 * A new Netronome extension to OpenFlow 1.5+ allows control over the
745 fields hashed for OpenFlow select groups. See "selection_method" and
746 related options in ovs-ofctl(8) for details.
747 - ovs-ofctl has a new '--bundle' option that makes the flow mod commands
748 ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows')
749 use an OpenFlow 1.4 bundle to operate the modifications as a single
750 atomic transaction. If any of the flow mods in a transaction fail, none
751 of them are executed. All flow mods in a bundle appear to datapath
752 lookups simultaneously.
753 - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow
754 mods as an input by allowing the flow specification to start with an
755 explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict'
756 keyword. A missing keyword is treated as 'add', so this is fully
757 backwards compatible. With the new '--bundle' option all the flow mods
758 are executed as a single atomic transaction using an OpenFlow 1.4 bundle.
759 - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
760 MD5 is no longer secure and some operating systems have started to disable
762 - ovsdb-server: New OVSDB protocol extension allows inequality tests on
763 "optional scalar" columns. See ovsdb-server(1) for details.
764 - ovs-vsctl now permits immutable columns in a new row to be modified in
765 the same transaction that creates the row.
766 - test-controller has been renamed ovs-testcontroller at request of users
767 who find it useful for testing basic OpenFlow setups. It is still not
768 a necessary or desirable part of most Open vSwitch deployments.
769 - Support for travis-ci.org based continuous integration builds has been
770 added. Build failures are reported to build@openvswitch.org. See INSTALL.md
771 file for additional details.
772 - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004).
773 The implementation has been tested successfully against the Ixia Automated
774 Network Validation Library (ANVL).
775 - Stats are no longer updated on fake bond interface.
776 - Keep active bond slave selection across OVS restart.
777 - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
778 containers. If and when there is a native integration of Open vSwitch
779 with Docker, the wrapper script will be retired.
780 - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported
781 protocols. This is generic tunneling mechanism for userspace datapath.
782 - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3)
783 - Support for Linux kernels up to 4.0.x
784 - The documentation now use the term 'destination' to mean one of syslog,
785 console or file for vlog logging instead of the previously used term
787 - Support for VXLAN Group Policy extension
788 - Initial support for the IETF Auto-Attach SPBM draft standard. This
789 contains rudimentary support for the LLDP protocol as needed for
791 - The default OpenFlow and OVSDB ports are now the IANA-assigned
792 numbers. OpenFlow is 6653 and OVSDB is 6640.
793 - Support for DPDK vHost.
794 - Support for outer UDP checksums in Geneve and VXLAN.
795 - The kernel vports with dependencies are no longer part of the overall
796 openvswitch.ko but built and loaded automatically as individual kernel
797 modules (vport-*.ko).
798 - Support for STT tunneling.
799 - ovs-sim: New developer tool for simulating multiple OVS instances.
800 See ovs-sim(1) for more information.
801 - Support to configure method (--syslog-method argument) that determines
802 how daemons will talk with syslog.
803 - Support for "ovs-appctl vlog/list-pattern" command that lets to query
804 logging message format for each destination.
808 ---------------------
809 - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
811 - Linux kernel datapath now has an exact match cache optimizing the
812 flow matching process.
813 - Datapath flows now have partially wildcarded tranport port field
814 matches. This reduces userspace upcalls, but increases the
815 number of different masks in the datapath. The kernel datapath
816 exact match cache removes the overhead of matching the incoming
817 packets with the larger number of masks, but when paired with an
818 older kernel module, some workloads may perform worse with the
820 - Compatibility with autoconf 2.63 (previously >=2.64)
822 v2.2.0 - Internal Release
823 ---------------------
824 - Internal ports are no longer brought up by default, because it
825 should be an administrator task to bring up devices as they are
827 - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
829 - Port creation and configuration errors are now stored in a new error
830 column of the Interface table and included in 'ovs-vsctl show'.
831 - The "ovsdbmonitor" graphical tool has been removed, because it was
832 poorly maintained and not widely used.
833 - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
834 controllers against Open vSwitch. See INSTALL.md for details.
835 - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
836 - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
837 log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
839 - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
840 tunnel API for GRE and VXLAN.
841 - Added DPDK support.
842 - Added support for custom vlog patterns in Python
846 ---------------------
847 - Address prefix tracking support for flow tables. New columns
848 "prefixes" in OVS-DB table "Flow_Table" controls which packet
849 header fields are used for address prefix tracking. Prefix
850 tracking allows the classifier to skip rules with longer than
851 necessary prefixes, resulting in better wildcarding for datapath
852 flows. Default configuration is to not use any fields for prefix
853 tracking. However, if any flow tables contain both exact matches
854 and masked matches for IP address fields, OVS performance may be
855 increased by using this feature.
856 * As of now, the fields for which prefix lookup can be enabled
857 are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
858 aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
859 (Using this feature for 'tun_id' would only make sense if the
860 tunnel IDs have prefix structure similar to IP addresses.)
861 * There is a maximum number of fields that can be enabled for any
862 one flow table. Currently this limit is 3.
864 $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
865 --id=@N1 create Flow_Table name=table0
866 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
867 --id=@N1 create Flow_Table name=table1
868 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
869 $ ovs-vsctl set Flow_Table table1 prefixes=[]
870 - TCP flags matching: OVS now supports matching of TCP flags. This
871 has an adverse performance impact when using OVS userspace 1.10
872 or older (no megaflows support) together with the new OVS kernel
873 module. It is recommended that the kernel and userspace modules
874 both are upgraded at the same time.
875 - The default OpenFlow and OVSDB ports will change to
876 IANA-assigned numbers in a future release. Consider updating
877 your installations to specify port numbers instead of using the
880 * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
881 * OVS limits the OpenFlow port numbers it assigns to port 32767 and
882 below, leaving port numbers above that range free for assignment
884 * ovs-vswitchd now honors changes to the "ofport_request" column
885 in the Interface table by changing the port's OpenFlow port
887 * The Open vSwitch software switch now supports OpenFlow groups.
888 - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
889 diagram only if graphviz package was installed at the build time.
890 - Support for Linux kernels up to 3.11
892 The "show" command also displays mega flow mask stats.
894 * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
895 - ovs-controller has been renamed test-controller. It is no longer
896 packaged or installed by default, because too many users assumed
897 incorrectly that ovs-controller was a necessary or desirable part
898 of an Open vSwitch deployment.
899 - Added vlog option to export to a UDP syslog sink.
901 * The "monitor" command can now monitor all tables in a database,
902 instead of being limited to a single table.
903 - The flow-eviction-threshold has been replaced by the flow-limit which is a
904 hard limit on the number of flows in the datapath. It defaults to 200,000
905 flows. OVS automatically adjusts this number depending on network
907 - Added IPv6 support for active and passive socket communications.
911 ---------------------
912 - The ovs-vswitchd process is no longer single-threaded. Multiple
913 threads are now used to handle flow set up and asynchronous
916 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
917 1.3, which had experimental support in 1.10).
918 * Experimental protocol support for OpenFlow 1.1+ groups. This
919 does not yet include an implementation in the Open vSwitch
921 * Experimental protocol support for OpenFlow 1.2+ meters. This
922 does not yet include an implementation in the Open vSwitch
924 * New support for matching outer source and destination IP address
925 of tunneled packets, for tunnel ports configured with the newly
926 added "remote_ip=flow" and "local_ip=flow" options.
927 * Support for matching on metadata 'pkt_mark' for interacting with
928 other system components. On Linux this corresponds to the skb
930 * Support matching, rewriting SCTP ports
931 - The Interface table in the database has a new "ifindex" column to
932 report the interface's OS-assigned ifindex.
933 - New "check-oftest" Makefile target for running OFTest against Open
934 vSwitch. See README-OFTest for details.
935 - The flow eviction threshold has been moved to the Open_vSwitch table.
936 - Database names are now mandatory when specifying ovsdb-server options
937 through database paths (e.g. Private key option with the database name
938 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
939 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
940 - Support for Linux kernels up to 3.10
942 * New "ofp-parse" for printing OpenFlow messages read from a file.
943 * New commands for OpenFlow 1.1+ groups.
944 - Added configurable flow caching support to IPFIX exporter.
945 - Dropped support for Linux pre-2.6.32.
946 - Log file timestamps and ovsdb commit timestamps are now reported
947 with millisecond resolution. (Previous versions only reported
951 v1.11.0 - 28 Aug 2013
952 ---------------------
953 - Support for megaflows, which allows wildcarding in the kernel (and
954 any dpif implementation that supports wildcards). Depending on
955 the flow table and switch configuration, flow set up rates are
956 close to the Linux bridge.
957 - The "tutorial" directory contains a new tutorial for some advanced
958 Open vSwitch features.
959 - Stable bond mode has been removed.
960 - The autopath action has been removed.
961 - New support for the data encapsulation format of the LISP tunnel
962 protocol (RFC 6830). An external control plane or manual flow
963 setup is required for EID-to-RLOC mapping.
965 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
966 1.1 and later are now implemented.
967 * New "stack" extension for use in actions, to push and pop from
969 * The "load" and "set_field" actions can now modify the "in_port". (This
970 allows one to enable output to a flow's input port by setting the
971 in_port to some unused value, such as OFPP_NONE.)
973 * New debugging commands "add-flow", "mod-flow", "del-flow".
974 * "dump-flows" now has a -m option to increase output verbosity.
975 - In dpif-based bridges, cache action translations, which can improve
976 flow set up performance by 80% with a complicated flow table.
977 - New syslog format, prefixed with "ovs|", to be easier to filter.
978 - RHEL: Removes the default firewall rule that allowed GRE traffic to
979 pass through. Any users that relied on this automatic firewall hole
980 will have to manually configure it. The ovs-ctl(8) manpage documents
981 the "enable-protocol" command that can be used as an alternative.
982 - New CFM demand mode which uses data traffic to indicate interface
985 v1.10.0 - 01 May 2013
986 ---------------------
987 - Bridge compatibility support has been removed. Any uses that
988 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
989 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
991 - The maximum size of the MAC learning table is now configurable.
992 - With the Linux datapath, packets for new flows are now queued
993 separately on a per-port basis, so it should no longer be
994 possible for a large number of new flows arriving on one port to
995 prevent new flows from being processed on other ports.
997 * Previously ovs-vsctl would retry connecting to the database forever,
998 causing it to hang if ovsdb-server was not running. Now, ovs-vsctl
999 only tries once by default (use --retry to try forever). This change
1000 means that you may want to remove uses of --timeout to avoid hangs
1002 * Many "ovs-vsctl" database commands now accept an --if-exists option.
1003 Please refer to the ovs-vsctl manpage for details.
1005 - Experimental support for newer versions of OpenFlow. See
1006 the "What versions of OpenFlow does Open vSwitch support?"
1007 question in the FAQ for more details.
1008 - The OpenFlow "dp_desc" may now be configured by setting the
1009 value of other-config:dp-desc in the Bridge table.
1010 - It is possible to request the OpenFlow port number with the
1011 "ofport_request" column in the Interface table.
1012 - The NXM flow_removed message now reports the OpenFlow table ID
1013 from which the flow was removed.
1015 - New support for the VXLAN tunnel protocol (see the IETF draft here:
1016 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
1017 - Tunneling requires the version of the kernel module paired with
1018 Open vSwitch 1.9.0 or later.
1019 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
1020 is no longer supported.
1021 - Path MTU discovery is no longer supported.
1022 - CAPWAP tunneling support removed.
1023 - Tunnels with multicast destination ports are no longer supported.
1025 - The "dump-flows" and "del-flows" no longer require an argument
1026 if only one datapath exists.
1028 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
1029 commands available allow control over logging rate limits.
1030 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
1031 that mimic the equivalent ovs-dpctl commands.
1032 - The ofproto library is now responsible for assigning OpenFlow port
1033 numbers. An ofproto implementation should assign them when
1034 port_construct() is called.
1035 - All dpif-based bridges of a particular type share a common
1036 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
1037 commands will now return information on that shared datapath. To
1038 get the equivalent bridge-specific information, use the new
1039 "ovs-appctl dpif/*" commands.
1040 - Backward-incompatible changes:
1041 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
1042 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
1043 conflict. ANY was rarely used in flow syntax, so we chose to
1044 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
1045 - Patch ports no longer require kernel support, so they now work
1046 with FreeBSD and the kernel module built into Linux 3.3 and later.
1047 - New "sample" action.
1050 v1.9.0 - 26 Feb 2013
1051 ------------------------
1053 - Support for ipv6 set action.
1054 - SKB mark matching and setting.
1055 - support for Linux kernels up to 3.8
1056 - FreeBSD is now a supported platform, thanks to code contributions from
1057 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
1058 - ovs-bugtool: New --ovs option to report only OVS related information.
1059 - New %t and %T log escapes to identify the subprogram within a
1060 cooperating group of processes or threads that emitted a log message.
1061 The default log patterns now include this information.
1063 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
1064 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
1065 - Adds support for writing to the metadata field for a flow.
1067 - The tunneling code no longer assumes input and output keys are
1068 symmetric. If they are not, PMTUD needs to be disabled for
1069 tunneling to work. Note this only applies to flow-based keys.
1070 - New support for a nonstandard form of GRE that supports a 64-bit key.
1071 - Tunnel Path MTU Discovery default value was set to 'disabled'.
1072 This feature is deprecated and will be removed soon.
1073 - Tunnel header caching removed.
1075 - Commands and actions that accept port numbers now also accept keywords
1076 that represent those ports (such as LOCAL, NONE, and ALL). This is
1077 also the recommended way to specify these ports, for compatibility
1078 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
1079 for these ports for different purposes).
1081 - Support requesting the port number with the "port_no" option in
1082 the "add-if" command.
1083 - ovs-pki: The "online PKI" features have been removed, along with
1084 the ovs-pki-cgi program that facilitated it, because of some
1085 alarmist insecurity claims. We do not believe that these claims
1086 are true, but because we do not know of any users for this
1087 feature it seems better on balance to remove it. (The ovs-pki-cgi
1088 program was not included in distribution packaging.)
1089 - ovsdb-server now enforces the immutability of immutable columns. This
1090 was not enforced in earlier versions due to an oversight.
1091 - The following features are now deprecated. They will be removed no
1092 earlier than February 2013. Please email dev@openvswitch.org with
1094 - Bridge compatibility.
1096 - The autopath action.
1097 - Interface type "null".
1098 - Numeric values for reserved ports (see "ovs-ofctl" note above).
1099 - Tunnel Path MTU Discovery.
1100 - CAPWAP tunnel support.
1101 - The data in the RARP packets can now be matched in the same way as the
1102 data in ARP packets.
1105 v1.8.0 - 26 Feb 2013
1106 ------------------------
1107 *** Internal only release ***
1108 - New FAQ. Please send updates and additions!
1109 - Authors of controllers, please read the new section titled "Action
1110 Reproduction" in DESIGN, which describes an Open vSwitch change in
1111 behavior in corner cases that may affect some controllers.
1113 - A new test utility that can create L3 tunnel between two Open
1114 vSwitches and detect connectivity issues.
1116 - New --sort and --rsort options for "dump-flows" command.
1117 - "mod-port" command can now control all OpenFlow config flags.
1119 - Allow general bitwise masking for IPv4 and IPv6 addresses in
1120 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
1122 - Allow support for arbitrary Ethernet masks. (Previously, only
1123 the multicast bit in the destination address could be individually
1125 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
1126 - The OFPST_QUEUE request now reports an error if a specified port or
1127 queue does not exist, or for requests for a specific queue on all
1128 ports, if the specified queue does not exist on any port. (Previous
1129 versions generally reported an empty set of results.)
1130 - New "flow monitor" feature to allow controllers to be notified of
1131 flow table changes as they happen.
1132 - Additional protocols are not mirrored and dropped when forward-bpdu is
1133 false. For a full list, see the ovs-vswitchd.conf.db man page.
1134 - Open vSwitch now sends RARP packets in situations where it previously
1135 sent a custom protocol, making it consistent with behavior of QEMU and
1137 - All Open vSwitch programs and log files now show timestamps in UTC,
1138 instead the local timezone, by default.
1141 v1.7.0 - 30 Jul 2012
1142 ------------------------
1143 - kernel modules are renamed. openvswitch_mod.ko is now
1144 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
1145 - Increased the number of NXM registers to 8.
1146 - Added ability to configure DSCP setting for manager and controller
1147 connections. By default, these connections have a DSCP value of
1148 Internetwork Control (0xc0).
1149 - Added the granular link health statistics, 'cfm_health', to an
1152 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
1153 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
1156 - Added the "dump-ports-desc" command to retrieve port
1157 information using the new port description multipart messages.
1159 - Added support for spawning ovs-test server from the client.
1160 - Now ovs-test is able to automatically create test bridges and ports.
1161 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
1162 - Tripled flow setup performance.
1163 - The "coverage/log" command previously available through ovs-appctl
1164 has been replaced by "coverage/show". The new command replies with
1165 coverage counter values, instead of logging them.
1168 v1.6.1 - 25 Jun 2012
1169 ------------------------
1170 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
1173 v1.6.0 - 24 Feb 2012
1174 ------------------------
1175 *** Internal only release ***
1177 - LACP bonds no longer fall back to balance-slb when negotiations fail.
1178 Instead they drop traffic.
1179 - The default bond_mode changed from SLB to active-backup, to protect
1180 unsuspecting users from the significant risks of SLB bonds (which are
1181 documented in vswitchd/INTERNALS).
1182 - Load balancing can be disabled by setting the bond-rebalance-interval
1185 - Added support for bitwise matching on TCP and UDP ports.
1186 See ovs-ofctl(8) for more information.
1187 - NXM flow dumps now include times elapsed toward idle and hard
1189 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
1190 controllers more precise control over which OpenFlow messages they
1191 receive asynchronously.
1192 - New "fin_timeout" action.
1193 - Added "fin_timeout" support to "learn" action.
1194 - New Nicira action NXAST_CONTROLLER that offers additional features
1195 over output to OFPP_CONTROLLER.
1196 - When QoS settings for an interface do not configure a default queue
1197 (queue 0), Open vSwitch now uses a default configuration for that
1198 queue, instead of dropping all packets as in previous versions.
1200 - Logging to console and file will have UTC timestamp as a default for
1201 all the daemons. An example of the default format is
1202 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default
1204 - The syntax of commands and options to set log levels was simplified,
1205 to make it easier to remember.
1206 - New support for limiting the number of flows in an OpenFlow flow
1207 table, with configurable policy for evicting flows upon
1208 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
1209 for more information.
1210 - New "enable-async-messages" column in the Controller table. If set to
1211 false, OpenFlow connections to the controller will initially have all
1212 asynchronous messages disabled, overriding normal OpenFlow behavior.
1213 - ofproto-provider interface:
1214 - "struct rule" has a new member "used" that ofproto implementations
1215 should maintain by updating with ofproto_rule_update_used().
1217 - The new option --timestamp causes the "monitor" command to print
1218 a timestamp with every update.
1219 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
1222 v1.5.0 - 01 Jun 2012
1223 ------------------------
1225 - Added support for querying, modifying, and deleting flows
1226 based on flow cookie when using NXM.
1227 - Added new NXM_PACKET_IN format.
1228 - Added new NXAST_DEC_TTL action.
1230 - Added daemonization support to the monitor and snoop commands.
1232 - The "find" command supports new set relational operators
1233 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
1234 - ovsdb-tool now uses the typical database and schema installation
1235 directories as defaults.
1236 - The default MAC learning timeout has been increased from 60 seconds
1237 to 300 seconds. The MAC learning timeout is now configurable.
1240 v1.4.0 - 30 Jan 2012
1241 ------------------------
1242 - Compatible with Open vSwitch kernel module included in Linux 3.3.
1243 - New "VLAN splinters" feature to work around buggy device drivers
1244 in old Linux versions. (This feature is deprecated. When
1245 broken device drivers are no longer in widespread use, we will
1246 delete this feature.) See ovs-vswitchd.conf.db(5) for more
1249 - Added ability to match on IPv6 flow label through NXM.
1250 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
1251 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
1252 - Added ability to modify ECN bits in IPv4.
1253 - Added ability to modify TTL in IPv4.
1255 - Don't require the "normal" action to use mirrors. Traffic will
1256 now be properly mirrored for any flows, regardless of their
1258 - Track packet and byte statistics sent on mirrors.
1259 - The sFlow implementation can now usually infer the correct agent
1260 device instead of having to be told explicitly.
1262 - New "fdb/flush" command to flush bridge's MAC learning table.
1264 - A new distributed testing tool that allows one to diagnose performance
1265 and connectivity issues. This tool currently is not included in RH or
1267 - RHEL packaging now supports integration with Red Hat network scripts.
1269 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
1270 to active-backup. SLB bonds carry significant risks with them
1271 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
1272 users from running into. Users are advised to update any scripts or
1273 configuration which may be negatively impacted by explicitly setting
1274 the bond mode which they want to use.
1277 v1.3.0 - 09 Dec 2011
1278 ------------------------
1280 - Added an OpenFlow extension which allows the "output" action to accept
1282 - Added an OpenFlow extension for flexible learning.
1283 - Bumped number of NXM registers from four to five.
1285 - New "version" command to determine version of running daemon.
1286 - If no argument is provided for "cfm/show", displays detailed
1287 information about all interfaces with CFM enabled.
1288 - If no argument is provided for "lacp/show", displays detailed
1289 information about all ports with LACP enabled.
1291 - New "set-if" command to modify a datapath port's configuration.
1293 - The software switch now supports 255 OpenFlow tables, instead
1294 of just one. By default, only table 0 is consulted, but the
1295 new NXAST_RESUBMIT_TABLE action can look up in additional
1296 tables. Tables 128 and above are reserved for use by the
1297 switch itself; please use only tables 0 through 127.
1298 - Add support for 802.1D spanning tree (STP).
1299 - Fragment handling extensions:
1300 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
1301 fields are made available for matching in fragments with
1303 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
1304 via "ip_frag" in ovs-ofctl).
1305 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
1306 fragment handling policy.
1307 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
1308 By default it remains compatible with the old version and other
1309 standards-based implementations.
1310 - Flow setups are now processed in a round-robin manner across ports
1311 to prevent any single client from monopolizing the CPU and conducting
1312 a denial of service attack.
1313 - Added support for native VLAN tagging. A new "vlan_mode"
1314 parameter can be set for "port". Possible values: "access",
1315 "trunk", "native-tagged" and "native-untagged".
1316 - test-openflowd has been removed. Please use ovs-vswitchd instead.
1318 v1.2.0 - 03 Aug 2011
1319 ------------------------
1320 - New "ofproto" abstraction layer to ease porting to hardware
1322 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
1323 - Datapath support for Linux kernels up to 3.0.
1325 - New "bundle" and "bundle_load" action extensions.
1327 - Implement table unique constraints.
1328 - Support cooperative locking between callers.
1330 - New "-s" option for "show" command prints packet and byte
1331 counters for each port.
1333 - New "--readd" option for "replace-flows".
1335 - New "show" command to print an overview of configuration.
1336 - New "comment" command to add remark that explains intentions.
1337 - ovs-brcompatd has been rewritten to fix long-standing bugs.
1338 - ovs-openflowd has been renamed test-openflowd and moved into the
1339 tests directory. Its presence confused too many users. Please
1340 use ovs-vswitchd instead.
1341 - New ovs-benchmark utility to test flow setup performance.
1342 - A new log level "off" has been added. Configuring a log facility
1343 "off" prevents any messages from being logged to it. Previously,
1344 "emer" was effectively "off" because no messages were ever logged at
1345 level "emer". Now, errors that cause a process to exit are logged
1347 - "configure" option --with-l26 has been renamed --with-linux, and
1348 --with-l26-source has been renamed --with-linux-source. The old
1349 names will be removed after the next release, so please update
1351 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
1352 datapath/linux-2.6/compat-2.6 directories.
1354 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
1355 Please use the extensible match extensions instead.
1356 - Removed the Maintenance_Point and Monitor tables in an effort
1357 to simplify 802.1ag configuration.
1358 - Performance and scalability improvements
1361 v1.1.0 - 05 Apr 2011
1362 ------------------------
1363 - Ability to define policies over IPv6
1366 - Support for extensible match extensions to OpenFlow
1368 - Support for HFSC qdisc.
1369 - Queue used by in-band control can now be configured.
1371 - Kernel<->userspace interface has been reworked and should be
1372 close to a stable ABI now.
1373 - "Port group" concept has been dropped.
1374 - GRE over IPSEC tunnels
1376 - New active backup bonding mode.
1377 - New L4 hashing support when LACP is enabled.
1378 - Source MAC hash now includes VLAN field also.
1380 - Greatly improved handling of large flow tables
1382 - "show" command now prints full vport configuration.
1383 - "dump-groups" command removed since kernel support for
1384 port groups was dropped.
1386 - New commands for working with the new Managers table.
1387 - "list" command enhanced with new formatting options and --columns
1389 - "get" command now accepts new --id option.
1390 - New "find" command.
1392 - New "queue-stats" command for printing queue stats.
1393 - New commands "replace-flows" and "diff-flows".
1394 - Commands to add and remove flows can now read from files.
1395 - New --flow-format option to enable or disable NXM.
1396 - New --more option to increase OpenFlow message verbosity.
1397 - Removed "tun-cookie" command, which is no longer useful.
1398 - ovs-controller enhancements for testing various features.
1399 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
1400 bugs. New ovs-vlan-bug-workaround command for enabling and
1401 disabling a workaround for these driver bugs.
1403 - "Resubmit" actions now update flow statistics.
1404 - New "register" extension for use in matching and actions, via NXM.
1405 - New "multipath" experimental action extension.
1406 - New support for matching multicast Ethernet frames, via NXM.
1407 - New extension for OpenFlow vendor error codes.
1408 - New extension to set the QoS output queue without actually
1409 sending to an output port.
1410 - Open vSwitch now reports a single flow table, instead of
1411 separate hash and wildcard tables. This better models the
1412 current implementation.
1413 - New experimental "note" action.
1414 - New "ofproto/trace" ovs-appctl command and associated utilities
1415 to ease debugging complex flow tables.
1417 - Schema documentation now includes an entity-relationship diagram.
1418 - The database is now garbage collected. In most tables,
1419 unreferenced rows will be deleted automatically.
1420 - Many tables now include statistics updated periodically by
1421 ovs-vswitchd or ovsdb-server.
1422 - Every table now has an "external-ids" column for use by OVS
1424 - There is no default controller anymore. Each bridge must have its
1425 controller individually specified.
1426 - The "fail-mode" is now a property of a Bridge instead of a Controller.
1427 - New versioning and checksum features.
1428 - New Managers table and manager_options column in Open_vSwitch table
1429 for specifying managers. The old "managers" column in the
1430 Open_vSwitch table has been removed.
1431 - Many "name" columns are now immutable.
1433 - Dropped support for XenServer pre-5.6.100.
1434 - Dropped support for Linux pre-2.6.18.
1435 - Dropped controller discovery support.
1436 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
1437 Statistics reporting in the database is a rough equivalent.
1438 - Dropped the "corekeeper" package (now separate, at
1439 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
1440 - Performance and scalability improvements
1443 v1.1.0pre2 - 13 Sep 2010
1444 ------------------------
1447 v1.1.0pre1 - 31 Aug 2010
1448 ------------------------
1449 - OpenFlow 1.0 slicing (QoS) functionality
1450 - Python bindings for configuration database (no write support)
1451 - Performance and scalability improvements
1454 v1.0.1 - 31 May 2010
1455 --------------------
1456 - New "patch" interface type
1459 v1.0.0 - 15 May 2010
1460 --------------------
1461 - Configuration database with remote management
1464 - Support for XenServer 5.5 and 5.6
1465 - Performance and scalability improvements
1468 v0.99.2 - 18 Feb 2010
1469 ---------------------
1472 v0.99.1 - 25 Jan 2010
1473 ---------------------
1474 - Add support for sFlow(R)
1475 - Make headers compatible with C++
1478 v0.99.0 - 14 Jan 2010
1479 ---------------------
1480 - User-space forwarding engine
1483 v0.90.7 - 29 Nov 2009
1484 ---------------------
1485 - Add support for NetFlow active timeouts
1488 v0.90.6 - 6 Oct 2009
1489 --------------------
1492 v0.90.5 - 21 Sep 2009
1493 ---------------------
1494 - Generalize in-band control to more diverse network setups
projects / mirror_ovs.git / blob