configure

   1 #!/bin/sh
   2 #
   3 # qemu configure script (c) 2003 Fabrice Bellard
   4 #
   5
   6 # Unset some variables known to interfere with behavior of common tools,
   7 # just as autoconf does.
   8 CLICOLOR_FORCE= GREP_OPTIONS=
   9 unset CLICOLOR_FORCE GREP_OPTIONS
  10
  11 # Don't allow CCACHE, if present, to use cached results of compile tests!
  12 export CCACHE_RECACHE=yes
  13
  14 # Temporary directory used for files created while
  15 # configure runs. Since it is in the build directory
  16 # we can safely blow away any previous version of it
  17 # (and we need not jump through hoops to try to delete
  18 # it when configure exits.)
  19 TMPDIR1="config-temp"
  20 rm -rf "${TMPDIR1}"
  21 mkdir -p "${TMPDIR1}"
  22 if [ $? -ne 0 ]; then
  23     echo "ERROR: failed to create temporary directory"
  24     exit 1
  25 fi
  26
  27 TMPB="qemu-conf"
  28 TMPC="${TMPDIR1}/${TMPB}.c"
  29 TMPO="${TMPDIR1}/${TMPB}.o"
  30 TMPCXX="${TMPDIR1}/${TMPB}.cxx"
  31 TMPE="${TMPDIR1}/${TMPB}.exe"
  32 TMPMO="${TMPDIR1}/${TMPB}.mo"
  33
  34 rm -f config.log
  35
  36 # Print a helpful header at the top of config.log
  37 echo "# QEMU configure log $(date)" >> config.log
  38 printf "# Configured with:" >> config.log
  39 printf " '%s'" "$0" "$@" >> config.log
  40 echo >> config.log
  41 echo "#" >> config.log
  42
  43 print_error() {
  44     (echo
  45     echo "ERROR: $1"
  46     while test -n "$2"; do
  47         echo "       $2"
  48         shift
  49     done
  50     echo) >&2
  51 }
  52
  53 error_exit() {
  54     print_error "$@"
  55     exit 1
  56 }
  57
  58 do_compiler() {
  59     # Run the compiler, capturing its output to the log. First argument
  60     # is compiler binary to execute.
  61     local compiler="$1"
  62     shift
  63     if test -n "$BASH_VERSION"; then eval '
  64         echo >>config.log "
  65 funcs: ${FUNCNAME[*]}
  66 lines: ${BASH_LINENO[*]}"
  67     '; fi
  68     echo $compiler "$@" >> config.log
  69     $compiler "$@" >> config.log 2>&1 || return $?
  70     # Test passed. If this is an --enable-werror build, rerun
  71     # the test with -Werror and bail out if it fails. This
  72     # makes warning-generating-errors in configure test code
  73     # obvious to developers.
  74     if test "$werror" != "yes"; then
  75         return 0
  76     fi
  77     # Don't bother rerunning the compile if we were already using -Werror
  78     case "$*" in
  79         *-Werror*)
  80            return 0
  81         ;;
  82     esac
  83     echo $compiler -Werror "$@" >> config.log
  84     $compiler -Werror "$@" >> config.log 2>&1 && return $?
  85     error_exit "configure test passed without -Werror but failed with -Werror." \
  86         "This is probably a bug in the configure script. The failing command" \
  87         "will be at the bottom of config.log." \
  88         "You can run configure with --disable-werror to bypass this check."
  89 }
  90
  91 do_cc() {
  92     do_compiler "$cc" "$@"
  93 }
  94
  95 do_cxx() {
  96     do_compiler "$cxx" "$@"
  97 }
  98
  99 update_cxxflags() {
 100     # Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
 101     # options which some versions of GCC's C++ compiler complain about
 102     # because they only make sense for C programs.
 103     QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS"
 104
 105     for arg in $QEMU_CFLAGS; do
 106         case $arg in
 107             -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
 108             -Wold-style-declaration|-Wold-style-definition|-Wredundant-decls)
 109                 ;;
 110             -std=gnu99)
 111                 QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }"-std=gnu++98"
 112                 ;;
 113             *)
 114                 QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
 115                 ;;
 116         esac
 117     done
 118 }
 119
 120 compile_object() {
 121   local_cflags="$1"
 122   do_cc $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
 123 }
 124
 125 compile_prog() {
 126   local_cflags="$1"
 127   local_ldflags="$2"
 128   do_cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags
 129 }
 130
 131 # symbolically link $1 to $2.  Portable version of "ln -sf".
 132 symlink() {
 133   rm -rf "$2"
 134   mkdir -p "$(dirname "$2")"
 135   ln -s "$1" "$2"
 136 }
 137
 138 # check whether a command is available to this shell (may be either an
 139 # executable or a builtin)
 140 has() {
 141     type "$1" >/dev/null 2>&1
 142 }
 143
 144 # search for an executable in PATH
 145 path_of() {
 146     local_command="$1"
 147     local_ifs="$IFS"
 148     local_dir=""
 149
 150     # pathname has a dir component?
 151     if [ "${local_command#*/}" != "$local_command" ]; then
 152         if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then
 153             echo "$local_command"
 154             return 0
 155         fi
 156     fi
 157     if [ -z "$local_command" ]; then
 158         return 1
 159     fi
 160
 161     IFS=:
 162     for local_dir in $PATH; do
 163         if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then
 164             echo "$local_dir/$local_command"
 165             IFS="${local_ifs:-$(printf ' \t\n')}"
 166             return 0
 167         fi
 168     done
 169     # not found
 170     IFS="${local_ifs:-$(printf ' \t\n')}"
 171     return 1
 172 }
 173
 174 have_backend () {
 175     echo "$trace_backends" | grep "$1" >/dev/null
 176 }
 177
 178 glob() {
 179     eval test -z '"${1#'"$2"'}"'
 180 }
 181
 182 supported_hax_target() {
 183     test "$hax" = "yes" || return 1
 184     glob "$1" "*-softmmu" || return 1
 185     case "${1%-softmmu}" in
 186         i386|x86_64)
 187             return 0
 188         ;;
 189     esac
 190     return 1
 191 }
 192
 193 supported_kvm_target() {
 194     test "$kvm" = "yes" || return 1
 195     glob "$1" "*-softmmu" || return 1
 196     case "${1%-softmmu}:$cpu" in
 197         arm:arm | aarch64:aarch64 | \
 198         i386:i386 | i386:x86_64 | i386:x32 | \
 199         x86_64:i386 | x86_64:x86_64 | x86_64:x32 | \
 200         mips:mips | mipsel:mips | \
 201         ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | ppc64:ppc64le | \
 202         s390x:s390x)
 203             return 0
 204         ;;
 205     esac
 206     return 1
 207 }
 208
 209 supported_xen_target() {
 210     test "$xen" = "yes" || return 1
 211     glob "$1" "*-softmmu" || return 1
 212     # Only i386 and x86_64 provide the xenpv machine.
 213     case "${1%-softmmu}" in
 214         i386|x86_64)
 215             return 0
 216         ;;
 217     esac
 218     return 1
 219 }
 220
 221 supported_hvf_target() {
 222     test "$hvf" = "yes" || return 1
 223     glob "$1" "*-softmmu" || return 1
 224     case "${1%-softmmu}" in
 225         x86_64)
 226             return 0
 227         ;;
 228     esac
 229     return 1
 230 }
 231
 232 supported_whpx_target() {
 233     test "$whpx" = "yes" || return 1
 234     glob "$1" "*-softmmu" || return 1
 235     case "${1%-softmmu}" in
 236         i386|x86_64)
 237             return 0
 238         ;;
 239     esac
 240     return 1
 241 }
 242
 243 supported_target() {
 244     case "$1" in
 245         *-softmmu)
 246             ;;
 247         *-linux-user)
 248             if test "$linux" != "yes"; then
 249                 print_error "Target '$target' is only available on a Linux host"
 250                 return 1
 251             fi
 252             ;;
 253         *-bsd-user)
 254             if test "$bsd" != "yes"; then
 255                 print_error "Target '$target' is only available on a BSD host"
 256                 return 1
 257             fi
 258             ;;
 259         *)
 260             print_error "Invalid target name '$target'"
 261             return 1
 262             ;;
 263     esac
 264     test "$tcg" = "yes" && return 0
 265     supported_kvm_target "$1" && return 0
 266     supported_xen_target "$1" && return 0
 267     supported_hax_target "$1" && return 0
 268     supported_hvf_target "$1" && return 0
 269     supported_whpx_target "$1" && return 0
 270     print_error "TCG disabled, but hardware accelerator not available for '$target'"
 271     return 1
 272 }
 273
 274
 275 ld_has() {
 276     $ld --help 2>/dev/null | grep ".$1" >/dev/null 2>&1
 277 }
 278
 279 # make source path absolute
 280 source_path=$(cd "$(dirname -- "$0")"; pwd)
 281
 282 if printf %s\\n "$source_path" "$PWD" | grep -q "[[:space:]:]";
 283 then
 284   error_exit "main directory cannot contain spaces nor colons"
 285 fi
 286
 287 # default parameters
 288 cpu=""
 289 iasl="iasl"
 290 interp_prefix="/usr/gnemul/qemu-%M"
 291 static="no"
 292 cross_prefix=""
 293 audio_drv_list=""
 294 block_drv_rw_whitelist=""
 295 block_drv_ro_whitelist=""
 296 host_cc="cc"
 297 libs_cpu=""
 298 libs_softmmu=""
 299 libs_tools=""
 300 audio_win_int=""
 301 libs_qga=""
 302 debug_info="yes"
 303 stack_protector=""
 304
 305 if test -e "$source_path/.git"
 306 then
 307     git_update=yes
 308     git_submodules="ui/keycodemapdb"
 309     git_submodules="$git_submodules tests/fp/berkeley-testfloat-3"
 310     git_submodules="$git_submodules tests/fp/berkeley-softfloat-3"
 311 else
 312     git_update=no
 313     git_submodules=""
 314
 315     if ! test -f "$source_path/ui/keycodemapdb/README"
 316     then
 317         echo
 318         echo "ERROR: missing file $source_path/ui/keycodemapdb/README"
 319         echo
 320         echo "This is not a GIT checkout but module content appears to"
 321         echo "be missing. Do not use 'git archive' or GitHub download links"
 322         echo "to acquire QEMU source archives. Non-GIT builds are only"
 323         echo "supported with source archives linked from:"
 324         echo
 325         echo "  https://www.qemu.org/download/#source"
 326         echo
 327         echo "Developers working with GIT can use scripts/archive-source.sh"
 328         echo "if they need to create valid source archives."
 329         echo
 330         exit 1
 331     fi
 332 fi
 333 git="git"
 334
 335 # Don't accept a target_list environment variable.
 336 unset target_list
 337 unset target_list_exclude
 338
 339 # Default value for a variable defining feature "foo".
 340 #  * foo="no"  feature will only be used if --enable-foo arg is given
 341 #  * foo=""    feature will be searched for, and if found, will be used
 342 #              unless --disable-foo is given
 343 #  * foo="yes" this value will only be set by --enable-foo flag.
 344 #              feature will searched for,
 345 #              if not found, configure exits with error
 346 #
 347 # Always add --enable-foo and --disable-foo command line args.
 348 # Distributions want to ensure that several features are compiled in, and it
 349 # is impossible without a --enable-foo that exits if a feature is not found.
 350
 351 bluez=""
 352 brlapi=""
 353 curl=""
 354 curses=""
 355 docs=""
 356 fdt=""
 357 netmap="no"
 358 sdl=""
 359 sdl_image=""
 360 virtfs=""
 361 mpath=""
 362 vnc="yes"
 363 sparse="no"
 364 vde=""
 365 vnc_sasl=""
 366 vnc_jpeg=""
 367 vnc_png=""
 368 xkbcommon=""
 369 xen=""
 370 xen_ctrl_version=""
 371 xen_pci_passthrough=""
 372 linux_aio=""
 373 cap_ng=""
 374 attr=""
 375 libattr=""
 376 xfs=""
 377 tcg="yes"
 378 membarrier=""
 379 vhost_net=""
 380 vhost_crypto=""
 381 vhost_scsi=""
 382 vhost_vsock=""
 383 vhost_user=""
 384 vhost_user_fs=""
 385 kvm="no"
 386 hax="no"
 387 hvf="no"
 388 whpx="no"
 389 rdma=""
 390 pvrdma=""
 391 gprof="no"
 392 debug_tcg="no"
 393 debug="no"
 394 sanitizers="no"
 395 fortify_source=""
 396 strip_opt="yes"
 397 tcg_interpreter="no"
 398 bigendian="no"
 399 mingw32="no"
 400 gcov="no"
 401 gcov_tool="gcov"
 402 EXESUF=""
 403 DSOSUF=".so"
 404 LDFLAGS_SHARED="-shared"
 405 modules="no"
 406 prefix="/usr/local"
 407 mandir="\${prefix}/share/man"
 408 datadir="\${prefix}/share"
 409 firmwarepath="\${prefix}/share/qemu-firmware"
 410 qemu_docdir="\${prefix}/share/doc/qemu"
 411 bindir="\${prefix}/bin"
 412 libdir="\${prefix}/lib"
 413 libexecdir="\${prefix}/libexec"
 414 includedir="\${prefix}/include"
 415 sysconfdir="\${prefix}/etc"
 416 local_statedir="\${prefix}/var"
 417 confsuffix="/qemu"
 418 slirp=""
 419 oss_lib=""
 420 bsd="no"
 421 linux="no"
 422 solaris="no"
 423 profiler="no"
 424 cocoa="no"
 425 softmmu="yes"
 426 linux_user="no"
 427 bsd_user="no"
 428 blobs="yes"
 429 pkgversion=""
 430 pie=""
 431 qom_cast_debug="yes"
 432 trace_backends="log"
 433 trace_file="trace"
 434 spice=""
 435 rbd=""
 436 smartcard=""
 437 libusb=""
 438 usb_redir=""
 439 opengl=""
 440 opengl_dmabuf="no"
 441 cpuid_h="no"
 442 avx2_opt=""
 443 zlib="yes"
 444 capstone=""
 445 lzo=""
 446 snappy=""
 447 bzip2=""
 448 lzfse=""
 449 guest_agent=""
 450 guest_agent_with_vss="no"
 451 guest_agent_ntddscsi="no"
 452 guest_agent_msi=""
 453 vss_win32_sdk=""
 454 win_sdk="no"
 455 want_tools="yes"
 456 libiscsi=""
 457 libnfs=""
 458 coroutine=""
 459 coroutine_pool=""
 460 debug_stack_usage="no"
 461 crypto_afalg="no"
 462 seccomp=""
 463 glusterfs=""
 464 glusterfs_xlator_opt="no"
 465 glusterfs_discard="no"
 466 glusterfs_fallocate="no"
 467 glusterfs_zerofill="no"
 468 glusterfs_ftruncate_has_stat="no"
 469 glusterfs_iocb_has_stat="no"
 470 gtk=""
 471 gtk_gl="no"
 472 tls_priority="NORMAL"
 473 gnutls=""
 474 nettle=""
 475 gcrypt=""
 476 gcrypt_hmac="no"
 477 auth_pam=""
 478 vte=""
 479 virglrenderer=""
 480 tpm=""
 481 libssh=""
 482 live_block_migration="yes"
 483 numa=""
 484 tcmalloc="no"
 485 jemalloc="no"
 486 replication="yes"
 487 vxhs=""
 488 bochs="yes"
 489 cloop="yes"
 490 dmg="yes"
 491 qcow1="yes"
 492 vdi="yes"
 493 vvfat="yes"
 494 qed="yes"
 495 parallels="yes"
 496 sheepdog="yes"
 497 libxml2=""
 498 debug_mutex="no"
 499 libpmem=""
 500 default_devices="yes"
 501
 502 supported_cpu="no"
 503 supported_os="no"
 504 bogus_os="no"
 505 malloc_trim=""
 506
 507 # parse CC options first
 508 for opt do
 509   optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
 510   case "$opt" in
 511   --cross-prefix=*) cross_prefix="$optarg"
 512   ;;
 513   --cc=*) CC="$optarg"
 514   ;;
 515   --cxx=*) CXX="$optarg"
 516   ;;
 517   --cpu=*) cpu="$optarg"
 518   ;;
 519   --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
 520   ;;
 521   --extra-cxxflags=*) QEMU_CXXFLAGS="$QEMU_CXXFLAGS $optarg"
 522   ;;
 523   --extra-ldflags=*) LDFLAGS="$LDFLAGS $optarg"
 524                      EXTRA_LDFLAGS="$optarg"
 525   ;;
 526   --enable-debug-info) debug_info="yes"
 527   ;;
 528   --disable-debug-info) debug_info="no"
 529   ;;
 530   --cross-cc-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-cc-FOO option"
 531   ;;
 532   --cross-cc-cflags-*) cc_arch=${opt#--cross-cc-flags-}; cc_arch=${cc_arch%%=*}
 533                       eval "cross_cc_cflags_${cc_arch}=\$optarg"
 534                       cross_cc_vars="$cross_cc_vars cross_cc_cflags_${cc_arch}"
 535   ;;
 536   --cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*}
 537                 cc_archs="$cc_archs $cc_arch"
 538                 eval "cross_cc_${cc_arch}=\$optarg"
 539                 cross_cc_vars="$cross_cc_vars cross_cc_${cc_arch}"
 540   ;;
 541   esac
 542 done
 543 # OS specific
 544 # Using uname is really, really broken.  Once we have the right set of checks
 545 # we can eliminate its usage altogether.
 546
 547 # Preferred compiler:
 548 #  ${CC} (if set)
 549 #  ${cross_prefix}gcc (if cross-prefix specified)
 550 #  system compiler
 551 if test -z "${CC}${cross_prefix}"; then
 552   cc="$host_cc"
 553 else
 554   cc="${CC-${cross_prefix}gcc}"
 555 fi
 556
 557 if test -z "${CXX}${cross_prefix}"; then
 558   cxx="c++"
 559 else
 560   cxx="${CXX-${cross_prefix}g++}"
 561 fi
 562
 563 ar="${AR-${cross_prefix}ar}"
 564 as="${AS-${cross_prefix}as}"
 565 ccas="${CCAS-$cc}"
 566 cpp="${CPP-$cc -E}"
 567 objcopy="${OBJCOPY-${cross_prefix}objcopy}"
 568 ld="${LD-${cross_prefix}ld}"
 569 ranlib="${RANLIB-${cross_prefix}ranlib}"
 570 nm="${NM-${cross_prefix}nm}"
 571 strip="${STRIP-${cross_prefix}strip}"
 572 windres="${WINDRES-${cross_prefix}windres}"
 573 pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
 574 query_pkg_config() {
 575     "${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
 576 }
 577 pkg_config=query_pkg_config
 578 sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
 579
 580 # If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
 581 ARFLAGS="${ARFLAGS-rv}"
 582
 583 # default flags for all hosts
 584 # We use -fwrapv to tell the compiler that we require a C dialect where
 585 # left shift of signed integers is well defined and has the expected
 586 # 2s-complement style results. (Both clang and gcc agree that it
 587 # provides these semantics.)
 588 QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv -std=gnu99 $QEMU_CFLAGS"
 589 QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
 590 QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
 591 QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
 592 QEMU_INCLUDES="-iquote . -iquote \$(SRC_PATH) -iquote \$(SRC_PATH)/accel/tcg -iquote \$(SRC_PATH)/include"
 593 if test "$debug_info" = "yes"; then
 594     CFLAGS="-g $CFLAGS"
 595     LDFLAGS="-g $LDFLAGS"
 596 fi
 597
 598 # running configure in the source tree?
 599 # we know that's the case if configure is there.
 600 if test -f "./configure"; then
 601     pwd_is_source_path="y"
 602 else
 603     pwd_is_source_path="n"
 604 fi
 605
 606 check_define() {
 607 cat > $TMPC <<EOF
 608 #if !defined($1)
 609 #error $1 not defined
 610 #endif
 611 int main(void) { return 0; }
 612 EOF
 613   compile_object
 614 }
 615
 616 check_include() {
 617 cat > $TMPC <<EOF
 618 #include <$1>
 619 int main(void) { return 0; }
 620 EOF
 621   compile_object
 622 }
 623
 624 write_c_skeleton() {
 625     cat > $TMPC <<EOF
 626 int main(void) { return 0; }
 627 EOF
 628 }
 629
 630 if check_define __linux__ ; then
 631   targetos="Linux"
 632 elif check_define _WIN32 ; then
 633   targetos='MINGW32'
 634 elif check_define __OpenBSD__ ; then
 635   targetos='OpenBSD'
 636 elif check_define __sun__ ; then
 637   targetos='SunOS'
 638 elif check_define __HAIKU__ ; then
 639   targetos='Haiku'
 640 elif check_define __FreeBSD__ ; then
 641   targetos='FreeBSD'
 642 elif check_define __FreeBSD_kernel__ && check_define __GLIBC__; then
 643   targetos='GNU/kFreeBSD'
 644 elif check_define __DragonFly__ ; then
 645   targetos='DragonFly'
 646 elif check_define __NetBSD__; then
 647   targetos='NetBSD'
 648 elif check_define __APPLE__; then
 649   targetos='Darwin'
 650 else
 651   # This is a fatal error, but don't report it yet, because we
 652   # might be going to just print the --help text, or it might
 653   # be the result of a missing compiler.
 654   targetos='bogus'
 655   bogus_os='yes'
 656 fi
 657
 658 # Some host OSes need non-standard checks for which CPU to use.
 659 # Note that these checks are broken for cross-compilation: if you're
 660 # cross-compiling to one of these OSes then you'll need to specify
 661 # the correct CPU with the --cpu option.
 662 case $targetos in
 663 Darwin)
 664   # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
 665   # run 64-bit userspace code.
 666   # If the user didn't specify a CPU explicitly and the kernel says this is
 667   # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
 668   if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
 669     cpu="x86_64"
 670   fi
 671   ;;
 672 SunOS)
 673   # $(uname -m) returns i86pc even on an x86_64 box, so default based on isainfo
 674   if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
 675     cpu="x86_64"
 676   fi
 677 esac
 678
 679 if test ! -z "$cpu" ; then
 680   # command line argument
 681   :
 682 elif check_define __i386__ ; then
 683   cpu="i386"
 684 elif check_define __x86_64__ ; then
 685   if check_define __ILP32__ ; then
 686     cpu="x32"
 687   else
 688     cpu="x86_64"
 689   fi
 690 elif check_define __sparc__ ; then
 691   if check_define __arch64__ ; then
 692     cpu="sparc64"
 693   else
 694     cpu="sparc"
 695   fi
 696 elif check_define _ARCH_PPC ; then
 697   if check_define _ARCH_PPC64 ; then
 698     if check_define _LITTLE_ENDIAN ; then
 699       cpu="ppc64le"
 700     else
 701       cpu="ppc64"
 702     fi
 703   else
 704     cpu="ppc"
 705   fi
 706 elif check_define __mips__ ; then
 707   cpu="mips"
 708 elif check_define __s390__ ; then
 709   if check_define __s390x__ ; then
 710     cpu="s390x"
 711   else
 712     cpu="s390"
 713   fi
 714 elif check_define __riscv ; then
 715   if check_define _LP64 ; then
 716     cpu="riscv64"
 717   else
 718     cpu="riscv32"
 719   fi
 720 elif check_define __arm__ ; then
 721   cpu="arm"
 722 elif check_define __aarch64__ ; then
 723   cpu="aarch64"
 724 else
 725   cpu=$(uname -m)
 726 fi
 727
 728 ARCH=
 729 # Normalise host CPU name and set ARCH.
 730 # Note that this case should only have supported host CPUs, not guests.
 731 case "$cpu" in
 732   ppc|ppc64|s390x|sparc64|x32|riscv32|riscv64)
 733     supported_cpu="yes"
 734   ;;
 735   ppc64le)
 736     ARCH="ppc64"
 737     supported_cpu="yes"
 738   ;;
 739   i386|i486|i586|i686|i86pc|BePC)
 740     cpu="i386"
 741     supported_cpu="yes"
 742   ;;
 743   x86_64|amd64)
 744     cpu="x86_64"
 745     supported_cpu="yes"
 746   ;;
 747   armv*b|armv*l|arm)
 748     cpu="arm"
 749     supported_cpu="yes"
 750   ;;
 751   aarch64)
 752     cpu="aarch64"
 753     supported_cpu="yes"
 754   ;;
 755   mips*)
 756     cpu="mips"
 757     supported_cpu="yes"
 758   ;;
 759   sparc|sun4[cdmuv])
 760     cpu="sparc"
 761     supported_cpu="yes"
 762   ;;
 763   *)
 764     # This will result in either an error or falling back to TCI later
 765     ARCH=unknown
 766   ;;
 767 esac
 768 if test -z "$ARCH"; then
 769   ARCH="$cpu"
 770 fi
 771
 772 # OS specific
 773
 774 # host *BSD for user mode
 775 HOST_VARIANT_DIR=""
 776
 777 case $targetos in
 778 MINGW32*)
 779   mingw32="yes"
 780   hax="yes"
 781   vhost_user="no"
 782   audio_possible_drivers="dsound sdl"
 783   if check_include dsound.h; then
 784     audio_drv_list="dsound"
 785   else
 786     audio_drv_list=""
 787   fi
 788   supported_os="yes"
 789 ;;
 790 GNU/kFreeBSD)
 791   bsd="yes"
 792   audio_drv_list="oss try-sdl"
 793   audio_possible_drivers="oss sdl pa"
 794 ;;
 795 FreeBSD)
 796   bsd="yes"
 797   make="${MAKE-gmake}"
 798   audio_drv_list="oss try-sdl"
 799   audio_possible_drivers="oss sdl pa"
 800   # needed for kinfo_getvmmap(3) in libutil.h
 801   LIBS="-lutil $LIBS"
 802   # needed for kinfo_getproc
 803   libs_qga="-lutil $libs_qga"
 804   netmap=""  # enable netmap autodetect
 805   HOST_VARIANT_DIR="freebsd"
 806   supported_os="yes"
 807 ;;
 808 DragonFly)
 809   bsd="yes"
 810   make="${MAKE-gmake}"
 811   audio_drv_list="oss try-sdl"
 812   audio_possible_drivers="oss sdl pa"
 813   HOST_VARIANT_DIR="dragonfly"
 814 ;;
 815 NetBSD)
 816   bsd="yes"
 817   hax="yes"
 818   make="${MAKE-gmake}"
 819   audio_drv_list="oss try-sdl"
 820   audio_possible_drivers="oss sdl"
 821   oss_lib="-lossaudio"
 822   HOST_VARIANT_DIR="netbsd"
 823   supported_os="yes"
 824 ;;
 825 OpenBSD)
 826   bsd="yes"
 827   make="${MAKE-gmake}"
 828   audio_drv_list="try-sdl"
 829   audio_possible_drivers="sdl"
 830   HOST_VARIANT_DIR="openbsd"
 831   supported_os="yes"
 832 ;;
 833 Darwin)
 834   bsd="yes"
 835   darwin="yes"
 836   hax="yes"
 837   hvf="yes"
 838   LDFLAGS_SHARED="-bundle -undefined dynamic_lookup"
 839   if [ "$cpu" = "x86_64" ] ; then
 840     QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
 841     LDFLAGS="-arch x86_64 $LDFLAGS"
 842   fi
 843   cocoa="yes"
 844   audio_drv_list="coreaudio try-sdl"
 845   audio_possible_drivers="coreaudio sdl"
 846   LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS"
 847   libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
 848   # Disable attempts to use ObjectiveC features in os/object.h since they
 849   # won't work when we're compiling with gcc as a C compiler.
 850   QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
 851   HOST_VARIANT_DIR="darwin"
 852   supported_os="yes"
 853 ;;
 854 SunOS)
 855   solaris="yes"
 856   make="${MAKE-gmake}"
 857   install="${INSTALL-ginstall}"
 858   smbd="${SMBD-/usr/sfw/sbin/smbd}"
 859   if test -f /usr/include/sys/soundcard.h ; then
 860     audio_drv_list="oss try-sdl"
 861   fi
 862   audio_possible_drivers="oss sdl"
 863 # needed for CMSG_ macros in sys/socket.h
 864   QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
 865 # needed for TIOCWIN* defines in termios.h
 866   QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
 867   QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS"
 868   solarisnetlibs="-lsocket -lnsl -lresolv"
 869   LIBS="$solarisnetlibs $LIBS"
 870   libs_qga="$solarisnetlibs $libs_qga"
 871 ;;
 872 Haiku)
 873   haiku="yes"
 874   QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
 875   LIBS="-lposix_error_mapper -lnetwork $LIBS"
 876 ;;
 877 Linux)
 878   audio_drv_list="try-pa oss"
 879   audio_possible_drivers="oss alsa sdl pa"
 880   linux="yes"
 881   linux_user="yes"
 882   kvm="yes"
 883   QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$PWD/linux-headers $QEMU_INCLUDES"
 884   supported_os="yes"
 885   libudev="yes"
 886 ;;
 887 esac
 888
 889 if [ "$bsd" = "yes" ] ; then
 890   if [ "$darwin" != "yes" ] ; then
 891     bsd_user="yes"
 892   fi
 893 fi
 894
 895 : ${make=${MAKE-make}}
 896 : ${install=${INSTALL-install}}
 897 # We prefer python 3.x. A bare 'python' is traditionally
 898 # python 2.x, but some distros have it as python 3.x, so
 899 # we check that before python2
 900 python=
 901 for binary in "${PYTHON-python3}" python python2
 902 do
 903     if has "$binary"
 904     then
 905         python="$binary"
 906         break
 907     fi
 908 done
 909 : ${smbd=${SMBD-/usr/sbin/smbd}}
 910
 911 # Default objcc to clang if available, otherwise use CC
 912 if has clang; then
 913   objcc=clang
 914 else
 915   objcc="$cc"
 916 fi
 917
 918 if test "$mingw32" = "yes" ; then
 919   EXESUF=".exe"
 920   DSOSUF=".dll"
 921   # MinGW needs -mthreads for TLS and macro _MT.
 922   QEMU_CFLAGS="-mthreads $QEMU_CFLAGS"
 923   LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
 924   write_c_skeleton;
 925   if compile_prog "" "-liberty" ; then
 926     LIBS="-liberty $LIBS"
 927   fi
 928   prefix="c:/Program Files/QEMU"
 929   mandir="\${prefix}"
 930   datadir="\${prefix}"
 931   qemu_docdir="\${prefix}"
 932   bindir="\${prefix}"
 933   sysconfdir="\${prefix}"
 934   local_statedir=
 935   confsuffix=""
 936   libs_qga="-lws2_32 -lwinmm -lpowrprof -lwtsapi32 -lwininet -liphlpapi -lnetapi32 $libs_qga"
 937 fi
 938
 939 werror=""
 940
 941 for opt do
 942   optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
 943   case "$opt" in
 944   --help|-h) show_help=yes
 945   ;;
 946   --version|-V) exec cat $source_path/VERSION
 947   ;;
 948   --prefix=*) prefix="$optarg"
 949   ;;
 950   --interp-prefix=*) interp_prefix="$optarg"
 951   ;;
 952   --cross-prefix=*)
 953   ;;
 954   --cc=*)
 955   ;;
 956   --host-cc=*) host_cc="$optarg"
 957   ;;
 958   --cxx=*)
 959   ;;
 960   --iasl=*) iasl="$optarg"
 961   ;;
 962   --objcc=*) objcc="$optarg"
 963   ;;
 964   --make=*) make="$optarg"
 965   ;;
 966   --install=*) install="$optarg"
 967   ;;
 968   --python=*) python="$optarg"
 969   ;;
 970   --gcov=*) gcov_tool="$optarg"
 971   ;;
 972   --smbd=*) smbd="$optarg"
 973   ;;
 974   --extra-cflags=*)
 975   ;;
 976   --extra-cxxflags=*)
 977   ;;
 978   --extra-ldflags=*)
 979   ;;
 980   --enable-debug-info)
 981   ;;
 982   --disable-debug-info)
 983   ;;
 984   --cross-cc-*)
 985   ;;
 986   --enable-modules)
 987       modules="yes"
 988   ;;
 989   --disable-modules)
 990       modules="no"
 991   ;;
 992   --cpu=*)
 993   ;;
 994   --target-list=*) target_list="$optarg"
 995                    if test "$target_list_exclude"; then
 996                        error_exit "Can't mix --target-list with --target-list-exclude"
 997                    fi
 998   ;;
 999   --target-list-exclude=*) target_list_exclude="$optarg"
1000                    if test "$target_list"; then
1001                        error_exit "Can't mix --target-list-exclude with --target-list"
1002                    fi
1003   ;;
1004   --enable-trace-backends=*) trace_backends="$optarg"
1005   ;;
1006   # XXX: backwards compatibility
1007   --enable-trace-backend=*) trace_backends="$optarg"
1008   ;;
1009   --with-trace-file=*) trace_file="$optarg"
1010   ;;
1011   --with-default-devices) default_devices="yes"
1012   ;;
1013   --without-default-devices) default_devices="no"
1014   ;;
1015   --enable-gprof) gprof="yes"
1016   ;;
1017   --enable-gcov) gcov="yes"
1018   ;;
1019   --static)
1020     static="yes"
1021     LDFLAGS="-static $LDFLAGS"
1022     QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
1023   ;;
1024   --mandir=*) mandir="$optarg"
1025   ;;
1026   --bindir=*) bindir="$optarg"
1027   ;;
1028   --libdir=*) libdir="$optarg"
1029   ;;
1030   --libexecdir=*) libexecdir="$optarg"
1031   ;;
1032   --includedir=*) includedir="$optarg"
1033   ;;
1034   --datadir=*) datadir="$optarg"
1035   ;;
1036   --with-confsuffix=*) confsuffix="$optarg"
1037   ;;
1038   --docdir=*) qemu_docdir="$optarg"
1039   ;;
1040   --sysconfdir=*) sysconfdir="$optarg"
1041   ;;
1042   --localstatedir=*) local_statedir="$optarg"
1043   ;;
1044   --firmwarepath=*) firmwarepath="$optarg"
1045   ;;
1046   --host=*|--build=*|\
1047   --disable-dependency-tracking|\
1048   --sbindir=*|--sharedstatedir=*|\
1049   --oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
1050   --htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
1051     # These switches are silently ignored, for compatibility with
1052     # autoconf-generated configure scripts. This allows QEMU's
1053     # configure to be used by RPM and similar macros that set
1054     # lots of directory switches by default.
1055   ;;
1056   --disable-sdl) sdl="no"
1057   ;;
1058   --enable-sdl) sdl="yes"
1059   ;;
1060   --disable-sdl-image) sdl_image="no"
1061   ;;
1062   --enable-sdl-image) sdl_image="yes"
1063   ;;
1064   --disable-qom-cast-debug) qom_cast_debug="no"
1065   ;;
1066   --enable-qom-cast-debug) qom_cast_debug="yes"
1067   ;;
1068   --disable-virtfs) virtfs="no"
1069   ;;
1070   --enable-virtfs) virtfs="yes"
1071   ;;
1072   --disable-mpath) mpath="no"
1073   ;;
1074   --enable-mpath) mpath="yes"
1075   ;;
1076   --disable-vnc) vnc="no"
1077   ;;
1078   --enable-vnc) vnc="yes"
1079   ;;
1080   --oss-lib=*) oss_lib="$optarg"
1081   ;;
1082   --audio-drv-list=*) audio_drv_list="$optarg"
1083   ;;
1084   --block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
1085   ;;
1086   --block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
1087   ;;
1088   --enable-debug-tcg) debug_tcg="yes"
1089   ;;
1090   --disable-debug-tcg) debug_tcg="no"
1091   ;;
1092   --enable-debug)
1093       # Enable debugging options that aren't excessively noisy
1094       debug_tcg="yes"
1095       debug_mutex="yes"
1096       debug="yes"
1097       strip_opt="no"
1098       fortify_source="no"
1099   ;;
1100   --enable-sanitizers) sanitizers="yes"
1101   ;;
1102   --disable-sanitizers) sanitizers="no"
1103   ;;
1104   --enable-sparse) sparse="yes"
1105   ;;
1106   --disable-sparse) sparse="no"
1107   ;;
1108   --disable-strip) strip_opt="no"
1109   ;;
1110   --disable-vnc-sasl) vnc_sasl="no"
1111   ;;
1112   --enable-vnc-sasl) vnc_sasl="yes"
1113   ;;
1114   --disable-vnc-jpeg) vnc_jpeg="no"
1115   ;;
1116   --enable-vnc-jpeg) vnc_jpeg="yes"
1117   ;;
1118   --disable-vnc-png) vnc_png="no"
1119   ;;
1120   --enable-vnc-png) vnc_png="yes"
1121   ;;
1122   --disable-slirp) slirp="no"
1123   ;;
1124   --enable-slirp=git) slirp="git"
1125   ;;
1126   --enable-slirp=system) slirp="system"
1127   ;;
1128   --disable-vde) vde="no"
1129   ;;
1130   --enable-vde) vde="yes"
1131   ;;
1132   --disable-netmap) netmap="no"
1133   ;;
1134   --enable-netmap) netmap="yes"
1135   ;;
1136   --disable-xen) xen="no"
1137   ;;
1138   --enable-xen) xen="yes"
1139   ;;
1140   --disable-xen-pci-passthrough) xen_pci_passthrough="no"
1141   ;;
1142   --enable-xen-pci-passthrough) xen_pci_passthrough="yes"
1143   ;;
1144   --disable-brlapi) brlapi="no"
1145   ;;
1146   --enable-brlapi) brlapi="yes"
1147   ;;
1148   --disable-bluez) bluez="no"
1149   ;;
1150   --enable-bluez) bluez="yes"
1151   ;;
1152   --disable-kvm) kvm="no"
1153   ;;
1154   --enable-kvm) kvm="yes"
1155   ;;
1156   --disable-hax) hax="no"
1157   ;;
1158   --enable-hax) hax="yes"
1159   ;;
1160   --disable-hvf) hvf="no"
1161   ;;
1162   --enable-hvf) hvf="yes"
1163   ;;
1164   --disable-whpx) whpx="no"
1165   ;;
1166   --enable-whpx) whpx="yes"
1167   ;;
1168   --disable-tcg-interpreter) tcg_interpreter="no"
1169   ;;
1170   --enable-tcg-interpreter) tcg_interpreter="yes"
1171   ;;
1172   --disable-cap-ng)  cap_ng="no"
1173   ;;
1174   --enable-cap-ng) cap_ng="yes"
1175   ;;
1176   --disable-tcg) tcg="no"
1177   ;;
1178   --enable-tcg) tcg="yes"
1179   ;;
1180   --disable-malloc-trim) malloc_trim="no"
1181   ;;
1182   --enable-malloc-trim) malloc_trim="yes"
1183   ;;
1184   --disable-spice) spice="no"
1185   ;;
1186   --enable-spice) spice="yes"
1187   ;;
1188   --disable-libiscsi) libiscsi="no"
1189   ;;
1190   --enable-libiscsi) libiscsi="yes"
1191   ;;
1192   --disable-libnfs) libnfs="no"
1193   ;;
1194   --enable-libnfs) libnfs="yes"
1195   ;;
1196   --enable-profiler) profiler="yes"
1197   ;;
1198   --disable-cocoa) cocoa="no"
1199   ;;
1200   --enable-cocoa)
1201       cocoa="yes" ;
1202       audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)"
1203   ;;
1204   --disable-system) softmmu="no"
1205   ;;
1206   --enable-system) softmmu="yes"
1207   ;;
1208   --disable-user)
1209       linux_user="no" ;
1210       bsd_user="no" ;
1211   ;;
1212   --enable-user) ;;
1213   --disable-linux-user) linux_user="no"
1214   ;;
1215   --enable-linux-user) linux_user="yes"
1216   ;;
1217   --disable-bsd-user) bsd_user="no"
1218   ;;
1219   --enable-bsd-user) bsd_user="yes"
1220   ;;
1221   --enable-pie) pie="yes"
1222   ;;
1223   --disable-pie) pie="no"
1224   ;;
1225   --enable-werror) werror="yes"
1226   ;;
1227   --disable-werror) werror="no"
1228   ;;
1229   --enable-stack-protector) stack_protector="yes"
1230   ;;
1231   --disable-stack-protector) stack_protector="no"
1232   ;;
1233   --disable-curses) curses="no"
1234   ;;
1235   --enable-curses) curses="yes"
1236   ;;
1237   --disable-iconv) iconv="no"
1238   ;;
1239   --enable-iconv) iconv="yes"
1240   ;;
1241   --disable-curl) curl="no"
1242   ;;
1243   --enable-curl) curl="yes"
1244   ;;
1245   --disable-fdt) fdt="no"
1246   ;;
1247   --enable-fdt) fdt="yes"
1248   ;;
1249   --disable-linux-aio) linux_aio="no"
1250   ;;
1251   --enable-linux-aio) linux_aio="yes"
1252   ;;
1253   --disable-attr) attr="no"
1254   ;;
1255   --enable-attr) attr="yes"
1256   ;;
1257   --disable-membarrier) membarrier="no"
1258   ;;
1259   --enable-membarrier) membarrier="yes"
1260   ;;
1261   --disable-blobs) blobs="no"
1262   ;;
1263   --with-pkgversion=*) pkgversion="$optarg"
1264   ;;
1265   --with-coroutine=*) coroutine="$optarg"
1266   ;;
1267   --disable-coroutine-pool) coroutine_pool="no"
1268   ;;
1269   --enable-coroutine-pool) coroutine_pool="yes"
1270   ;;
1271   --enable-debug-stack-usage) debug_stack_usage="yes"
1272   ;;
1273   --enable-crypto-afalg) crypto_afalg="yes"
1274   ;;
1275   --disable-crypto-afalg) crypto_afalg="no"
1276   ;;
1277   --disable-docs) docs="no"
1278   ;;
1279   --enable-docs) docs="yes"
1280   ;;
1281   --disable-vhost-net) vhost_net="no"
1282   ;;
1283   --enable-vhost-net) vhost_net="yes"
1284   ;;
1285   --disable-vhost-crypto) vhost_crypto="no"
1286   ;;
1287   --enable-vhost-crypto) vhost_crypto="yes"
1288   ;;
1289   --disable-vhost-scsi) vhost_scsi="no"
1290   ;;
1291   --enable-vhost-scsi) vhost_scsi="yes"
1292   ;;
1293   --disable-vhost-vsock) vhost_vsock="no"
1294   ;;
1295   --enable-vhost-vsock) vhost_vsock="yes"
1296   ;;
1297   --disable-vhost-user-fs) vhost_user_fs="no"
1298   ;;
1299   --enable-vhost-user-fs) vhost_user_fs="yes"
1300   ;;
1301   --disable-opengl) opengl="no"
1302   ;;
1303   --enable-opengl) opengl="yes"
1304   ;;
1305   --disable-rbd) rbd="no"
1306   ;;
1307   --enable-rbd) rbd="yes"
1308   ;;
1309   --disable-xfsctl) xfs="no"
1310   ;;
1311   --enable-xfsctl) xfs="yes"
1312   ;;
1313   --disable-smartcard) smartcard="no"
1314   ;;
1315   --enable-smartcard) smartcard="yes"
1316   ;;
1317   --disable-libusb) libusb="no"
1318   ;;
1319   --enable-libusb) libusb="yes"
1320   ;;
1321   --disable-usb-redir) usb_redir="no"
1322   ;;
1323   --enable-usb-redir) usb_redir="yes"
1324   ;;
1325   --disable-zlib-test) zlib="no"
1326   ;;
1327   --disable-lzo) lzo="no"
1328   ;;
1329   --enable-lzo) lzo="yes"
1330   ;;
1331   --disable-snappy) snappy="no"
1332   ;;
1333   --enable-snappy) snappy="yes"
1334   ;;
1335   --disable-bzip2) bzip2="no"
1336   ;;
1337   --enable-bzip2) bzip2="yes"
1338   ;;
1339   --enable-lzfse) lzfse="yes"
1340   ;;
1341   --disable-lzfse) lzfse="no"
1342   ;;
1343   --enable-guest-agent) guest_agent="yes"
1344   ;;
1345   --disable-guest-agent) guest_agent="no"
1346   ;;
1347   --enable-guest-agent-msi) guest_agent_msi="yes"
1348   ;;
1349   --disable-guest-agent-msi) guest_agent_msi="no"
1350   ;;
1351   --with-vss-sdk) vss_win32_sdk=""
1352   ;;
1353   --with-vss-sdk=*) vss_win32_sdk="$optarg"
1354   ;;
1355   --without-vss-sdk) vss_win32_sdk="no"
1356   ;;
1357   --with-win-sdk) win_sdk=""
1358   ;;
1359   --with-win-sdk=*) win_sdk="$optarg"
1360   ;;
1361   --without-win-sdk) win_sdk="no"
1362   ;;
1363   --enable-tools) want_tools="yes"
1364   ;;
1365   --disable-tools) want_tools="no"
1366   ;;
1367   --enable-seccomp) seccomp="yes"
1368   ;;
1369   --disable-seccomp) seccomp="no"
1370   ;;
1371   --disable-glusterfs) glusterfs="no"
1372   ;;
1373   --disable-avx2) avx2_opt="no"
1374   ;;
1375   --enable-avx2) avx2_opt="yes"
1376   ;;
1377   --enable-glusterfs) glusterfs="yes"
1378   ;;
1379   --disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
1380       echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
1381   ;;
1382   --enable-vhdx|--disable-vhdx)
1383       echo "$0: $opt is obsolete, VHDX driver is always built" >&2
1384   ;;
1385   --enable-uuid|--disable-uuid)
1386       echo "$0: $opt is obsolete, UUID support is always built" >&2
1387   ;;
1388   --disable-gtk) gtk="no"
1389   ;;
1390   --enable-gtk) gtk="yes"
1391   ;;
1392   --tls-priority=*) tls_priority="$optarg"
1393   ;;
1394   --disable-gnutls) gnutls="no"
1395   ;;
1396   --enable-gnutls) gnutls="yes"
1397   ;;
1398   --disable-nettle) nettle="no"
1399   ;;
1400   --enable-nettle) nettle="yes"
1401   ;;
1402   --disable-gcrypt) gcrypt="no"
1403   ;;
1404   --enable-gcrypt) gcrypt="yes"
1405   ;;
1406   --disable-auth-pam) auth_pam="no"
1407   ;;
1408   --enable-auth-pam) auth_pam="yes"
1409   ;;
1410   --enable-rdma) rdma="yes"
1411   ;;
1412   --disable-rdma) rdma="no"
1413   ;;
1414   --enable-pvrdma) pvrdma="yes"
1415   ;;
1416   --disable-pvrdma) pvrdma="no"
1417   ;;
1418   --disable-vte) vte="no"
1419   ;;
1420   --enable-vte) vte="yes"
1421   ;;
1422   --disable-virglrenderer) virglrenderer="no"
1423   ;;
1424   --enable-virglrenderer) virglrenderer="yes"
1425   ;;
1426   --disable-tpm) tpm="no"
1427   ;;
1428   --enable-tpm) tpm="yes"
1429   ;;
1430   --disable-libssh) libssh="no"
1431   ;;
1432   --enable-libssh) libssh="yes"
1433   ;;
1434   --disable-live-block-migration) live_block_migration="no"
1435   ;;
1436   --enable-live-block-migration) live_block_migration="yes"
1437   ;;
1438   --disable-numa) numa="no"
1439   ;;
1440   --enable-numa) numa="yes"
1441   ;;
1442   --disable-libxml2) libxml2="no"
1443   ;;
1444   --enable-libxml2) libxml2="yes"
1445   ;;
1446   --disable-tcmalloc) tcmalloc="no"
1447   ;;
1448   --enable-tcmalloc) tcmalloc="yes"
1449   ;;
1450   --disable-jemalloc) jemalloc="no"
1451   ;;
1452   --enable-jemalloc) jemalloc="yes"
1453   ;;
1454   --disable-replication) replication="no"
1455   ;;
1456   --enable-replication) replication="yes"
1457   ;;
1458   --disable-vxhs) vxhs="no"
1459   ;;
1460   --enable-vxhs) vxhs="yes"
1461   ;;
1462   --disable-bochs) bochs="no"
1463   ;;
1464   --enable-bochs) bochs="yes"
1465   ;;
1466   --disable-cloop) cloop="no"
1467   ;;
1468   --enable-cloop) cloop="yes"
1469   ;;
1470   --disable-dmg) dmg="no"
1471   ;;
1472   --enable-dmg) dmg="yes"
1473   ;;
1474   --disable-qcow1) qcow1="no"
1475   ;;
1476   --enable-qcow1) qcow1="yes"
1477   ;;
1478   --disable-vdi) vdi="no"
1479   ;;
1480   --enable-vdi) vdi="yes"
1481   ;;
1482   --disable-vvfat) vvfat="no"
1483   ;;
1484   --enable-vvfat) vvfat="yes"
1485   ;;
1486   --disable-qed) qed="no"
1487   ;;
1488   --enable-qed) qed="yes"
1489   ;;
1490   --disable-parallels) parallels="no"
1491   ;;
1492   --enable-parallels) parallels="yes"
1493   ;;
1494   --disable-sheepdog) sheepdog="no"
1495   ;;
1496   --enable-sheepdog) sheepdog="yes"
1497   ;;
1498   --disable-vhost-user) vhost_user="no"
1499   ;;
1500   --enable-vhost-user) vhost_user="yes"
1501   ;;
1502   --disable-vhost-kernel) vhost_kernel="no"
1503   ;;
1504   --enable-vhost-kernel) vhost_kernel="yes"
1505   ;;
1506   --disable-capstone) capstone="no"
1507   ;;
1508   --enable-capstone) capstone="yes"
1509   ;;
1510   --enable-capstone=git) capstone="git"
1511   ;;
1512   --enable-capstone=system) capstone="system"
1513   ;;
1514   --with-git=*) git="$optarg"
1515   ;;
1516   --enable-git-update) git_update=yes
1517   ;;
1518   --disable-git-update) git_update=no
1519   ;;
1520   --enable-debug-mutex) debug_mutex=yes
1521   ;;
1522   --disable-debug-mutex) debug_mutex=no
1523   ;;
1524   --enable-libpmem) libpmem=yes
1525   ;;
1526   --disable-libpmem) libpmem=no
1527   ;;
1528   --enable-xkbcommon) xkbcommon=yes
1529   ;;
1530   --disable-xkbcommon) xkbcommon=no
1531   ;;
1532   *)
1533       echo "ERROR: unknown option $opt"
1534       echo "Try '$0 --help' for more information"
1535       exit 1
1536   ;;
1537   esac
1538 done
1539
1540 case "$cpu" in
1541     ppc)
1542            CPU_CFLAGS="-m32"
1543            LDFLAGS="-m32 $LDFLAGS"
1544            ;;
1545     ppc64)
1546            CPU_CFLAGS="-m64"
1547            LDFLAGS="-m64 $LDFLAGS"
1548            ;;
1549     sparc)
1550            CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
1551            LDFLAGS="-m32 -mv8plus $LDFLAGS"
1552            ;;
1553     sparc64)
1554            CPU_CFLAGS="-m64 -mcpu=ultrasparc"
1555            LDFLAGS="-m64 $LDFLAGS"
1556            ;;
1557     s390)
1558            CPU_CFLAGS="-m31"
1559            LDFLAGS="-m31 $LDFLAGS"
1560            ;;
1561     s390x)
1562            CPU_CFLAGS="-m64"
1563            LDFLAGS="-m64 $LDFLAGS"
1564            ;;
1565     i386)
1566            CPU_CFLAGS="-m32"
1567            LDFLAGS="-m32 $LDFLAGS"
1568            ;;
1569     x86_64)
1570            # ??? Only extremely old AMD cpus do not have cmpxchg16b.
1571            # If we truly care, we should simply detect this case at
1572            # runtime and generate the fallback to serial emulation.
1573            CPU_CFLAGS="-m64 -mcx16"
1574            LDFLAGS="-m64 $LDFLAGS"
1575            ;;
1576     x32)
1577            CPU_CFLAGS="-mx32"
1578            LDFLAGS="-mx32 $LDFLAGS"
1579            ;;
1580     # No special flags required for other host CPUs
1581 esac
1582
1583 eval "cross_cc_${cpu}=\$host_cc"
1584 cross_cc_vars="$cross_cc_vars cross_cc_${cpu}"
1585 QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
1586
1587 # For user-mode emulation the host arch has to be one we explicitly
1588 # support, even if we're using TCI.
1589 if [ "$ARCH" = "unknown" ]; then
1590   bsd_user="no"
1591   linux_user="no"
1592 fi
1593
1594 default_target_list=""
1595
1596 mak_wilds=""
1597
1598 if [ "$softmmu" = "yes" ]; then
1599     mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
1600 fi
1601 if [ "$linux_user" = "yes" ]; then
1602     mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
1603 fi
1604 if [ "$bsd_user" = "yes" ]; then
1605     mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
1606 fi
1607
1608 if test -z "$target_list_exclude"; then
1609     for config in $mak_wilds; do
1610         default_target_list="${default_target_list} $(basename "$config" .mak)"
1611     done
1612 else
1613     exclude_list=$(echo "$target_list_exclude" | sed -e 's/,/ /g')
1614     for config in $mak_wilds; do
1615         target="$(basename "$config" .mak)"
1616         exclude="no"
1617         for excl in $exclude_list; do
1618             if test "$excl" = "$target"; then
1619                 exclude="yes"
1620                 break;
1621             fi
1622         done
1623         if test "$exclude" = "no"; then
1624             default_target_list="${default_target_list} $target"
1625         fi
1626     done
1627 fi
1628
1629 # Enumerate public trace backends for --help output
1630 trace_backend_list=$(echo $(grep -le '^PUBLIC = True$' "$source_path"/scripts/tracetool/backend/*.py | sed -e 's/^.*\/\(.*\)\.py$/\1/'))
1631
1632 if test x"$show_help" = x"yes" ; then
1633 cat << EOF
1634
1635 Usage: configure [options]
1636 Options: [defaults in brackets after descriptions]
1637
1638 Standard options:
1639   --help                   print this message
1640   --prefix=PREFIX          install in PREFIX [$prefix]
1641   --interp-prefix=PREFIX   where to find shared libraries, etc.
1642                            use %M for cpu name [$interp_prefix]
1643   --target-list=LIST       set target list (default: build everything)
1644 $(echo Available targets: $default_target_list | \
1645   fold -s -w 53 | sed -e 's/^/                           /')
1646   --target-list-exclude=LIST exclude a set of targets from the default target-list
1647
1648 Advanced options (experts only):
1649   --cross-prefix=PREFIX    use PREFIX for compile tools [$cross_prefix]
1650   --cc=CC                  use C compiler CC [$cc]
1651   --iasl=IASL              use ACPI compiler IASL [$iasl]
1652   --host-cc=CC             use C compiler CC [$host_cc] for code run at
1653                            build time
1654   --cxx=CXX                use C++ compiler CXX [$cxx]
1655   --objcc=OBJCC            use Objective-C compiler OBJCC [$objcc]
1656   --extra-cflags=CFLAGS    append extra C compiler flags QEMU_CFLAGS
1657   --extra-cxxflags=CXXFLAGS append extra C++ compiler flags QEMU_CXXFLAGS
1658   --extra-ldflags=LDFLAGS  append extra linker flags LDFLAGS
1659   --cross-cc-ARCH=CC       use compiler when building ARCH guest test cases
1660   --cross-cc-flags-ARCH=   use compiler flags when building ARCH guest tests
1661   --make=MAKE              use specified make [$make]
1662   --install=INSTALL        use specified install [$install]
1663   --python=PYTHON          use specified python [$python]
1664   --smbd=SMBD              use specified smbd [$smbd]
1665   --with-git=GIT           use specified git [$git]
1666   --static                 enable static build [$static]
1667   --mandir=PATH            install man pages in PATH
1668   --datadir=PATH           install firmware in PATH$confsuffix
1669   --docdir=PATH            install documentation in PATH$confsuffix
1670   --bindir=PATH            install binaries in PATH
1671   --libdir=PATH            install libraries in PATH
1672   --libexecdir=PATH        install helper binaries in PATH
1673   --sysconfdir=PATH        install config in PATH$confsuffix
1674   --localstatedir=PATH     install local state in PATH (set at runtime on win32)
1675   --firmwarepath=PATH      search PATH for firmware files
1676   --with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
1677   --with-pkgversion=VERS   use specified string as sub-version of the package
1678   --enable-debug           enable common debug build options
1679   --enable-sanitizers      enable default sanitizers
1680   --disable-strip          disable stripping binaries
1681   --disable-werror         disable compilation abort on warning
1682   --disable-stack-protector disable compiler-provided stack protection
1683   --audio-drv-list=LIST    set audio drivers list:
1684                            Available drivers: $audio_possible_drivers
1685   --block-drv-whitelist=L  Same as --block-drv-rw-whitelist=L
1686   --block-drv-rw-whitelist=L
1687                            set block driver read-write whitelist
1688                            (affects only QEMU, not qemu-img)
1689   --block-drv-ro-whitelist=L
1690                            set block driver read-only whitelist
1691                            (affects only QEMU, not qemu-img)
1692   --enable-trace-backends=B Set trace backend
1693                            Available backends: $trace_backend_list
1694   --with-trace-file=NAME   Full PATH,NAME of file to store traces
1695                            Default:trace-<pid>
1696   --disable-slirp          disable SLIRP userspace network connectivity
1697   --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
1698   --enable-malloc-trim     enable libc malloc_trim() for memory optimization
1699   --oss-lib                path to OSS library
1700   --cpu=CPU                Build for host CPU [$cpu]
1701   --with-coroutine=BACKEND coroutine backend. Supported options:
1702                            ucontext, sigaltstack, windows
1703   --enable-gcov            enable test coverage analysis with gcov
1704   --gcov=GCOV              use specified gcov [$gcov_tool]
1705   --disable-blobs          disable installing provided firmware blobs
1706   --with-vss-sdk=SDK-path  enable Windows VSS support in QEMU Guest Agent
1707   --with-win-sdk=SDK-path  path to Windows Platform SDK (to build VSS .tlb)
1708   --tls-priority           default TLS protocol/cipher priority string
1709   --enable-gprof           QEMU profiling with gprof
1710   --enable-profiler        profiler support
1711   --enable-debug-stack-usage
1712                            track the maximum stack usage of stacks created by qemu_alloc_stack
1713
1714 Optional features, enabled with --enable-FEATURE and
1715 disabled with --disable-FEATURE, default is enabled if available:
1716
1717   system          all system emulation targets
1718   user            supported user emulation targets
1719   linux-user      all linux usermode emulation targets
1720   bsd-user        all BSD usermode emulation targets
1721   docs            build documentation
1722   guest-agent     build the QEMU Guest Agent
1723   guest-agent-msi build guest agent Windows MSI installation package
1724   pie             Position Independent Executables
1725   modules         modules support (non-Windows)
1726   debug-tcg       TCG debugging (default is disabled)
1727   debug-info      debugging information
1728   sparse          sparse checker
1729
1730   gnutls          GNUTLS cryptography support
1731   nettle          nettle cryptography support
1732   gcrypt          libgcrypt cryptography support
1733   auth-pam        PAM access control
1734   sdl             SDL UI
1735   sdl-image       SDL Image support for icons
1736   gtk             gtk UI
1737   vte             vte support for the gtk UI
1738   curses          curses UI
1739   iconv           font glyph conversion support
1740   vnc             VNC UI support
1741   vnc-sasl        SASL encryption for VNC server
1742   vnc-jpeg        JPEG lossy compression for VNC server
1743   vnc-png         PNG compression for VNC server
1744   cocoa           Cocoa UI (Mac OS X only)
1745   virtfs          VirtFS
1746   mpath           Multipath persistent reservation passthrough
1747   xen             xen backend driver support
1748   xen-pci-passthrough    PCI passthrough support for Xen
1749   brlapi          BrlAPI (Braile)
1750   curl            curl connectivity
1751   membarrier      membarrier system call (for Linux 4.14+ or Windows)
1752   fdt             fdt device tree
1753   bluez           bluez stack connectivity
1754   kvm             KVM acceleration support
1755   hax             HAX acceleration support
1756   hvf             Hypervisor.framework acceleration support
1757   whpx            Windows Hypervisor Platform acceleration support
1758   rdma            Enable RDMA-based migration
1759   pvrdma          Enable PVRDMA support
1760   vde             support for vde network
1761   netmap          support for netmap network
1762   linux-aio       Linux AIO support
1763   cap-ng          libcap-ng support
1764   attr            attr and xattr support
1765   vhost-net       vhost-net kernel acceleration support
1766   vhost-vsock     virtio sockets device support
1767   vhost-scsi      vhost-scsi kernel target support
1768   vhost-crypto    vhost-user-crypto backend support
1769   vhost-kernel    vhost kernel backend support
1770   vhost-user      vhost-user backend support
1771   spice           spice
1772   rbd             rados block device (rbd)
1773   libiscsi        iscsi support
1774   libnfs          nfs support
1775   smartcard       smartcard support (libcacard)
1776   libusb          libusb (for usb passthrough)
1777   live-block-migration   Block migration in the main migration stream
1778   usb-redir       usb network redirection support
1779   lzo             support of lzo compression library
1780   snappy          support of snappy compression library
1781   bzip2           support of bzip2 compression library
1782                   (for reading bzip2-compressed dmg images)
1783   lzfse           support of lzfse compression library
1784                   (for reading lzfse-compressed dmg images)
1785   seccomp         seccomp support
1786   coroutine-pool  coroutine freelist (better performance)
1787   glusterfs       GlusterFS backend
1788   tpm             TPM support
1789   libssh          ssh block device support
1790   numa            libnuma support
1791   libxml2         for Parallels image format
1792   tcmalloc        tcmalloc support
1793   jemalloc        jemalloc support
1794   avx2            AVX2 optimization support
1795   replication     replication support
1796   opengl          opengl support
1797   virglrenderer   virgl rendering support
1798   xfsctl          xfsctl support
1799   qom-cast-debug  cast debugging support
1800   tools           build qemu-io, qemu-nbd and qemu-img tools
1801   vxhs            Veritas HyperScale vDisk backend support
1802   bochs           bochs image format support
1803   cloop           cloop image format support
1804   dmg             dmg image format support
1805   qcow1           qcow v1 image format support
1806   vdi             vdi image format support
1807   vvfat           vvfat image format support
1808   qed             qed image format support
1809   parallels       parallels image format support
1810   sheepdog        sheepdog block driver support
1811   crypto-afalg    Linux AF_ALG crypto backend driver
1812   capstone        capstone disassembler support
1813   debug-mutex     mutex debugging support
1814   libpmem         libpmem support
1815   xkbcommon       xkbcommon support
1816
1817 NOTE: The object files are built at the place where configure is launched
1818 EOF
1819 exit 0
1820 fi
1821
1822 # Remove old dependency files to make sure that they get properly regenerated
1823 rm -f */config-devices.mak.d
1824
1825 if test -z "$python"
1826 then
1827     error_exit "Python not found. Use --python=/path/to/python"
1828 fi
1829
1830 # Note that if the Python conditional here evaluates True we will exit
1831 # with status 1 which is a shell 'false' value.
1832 if ! $python -c 'import sys; sys.exit(sys.version_info < (2,7))'; then
1833   error_exit "Cannot use '$python', Python 2 >= 2.7 or Python 3 is required." \
1834       "Use --python=/path/to/python to specify a supported Python."
1835 fi
1836
1837 # Preserve python version since some functionality is dependent on it
1838 python_version=$($python -c 'import sys; print("%d.%d.%d" % (sys.version_info[0], sys.version_info[1], sys.version_info[2]))' 2>/dev/null)
1839
1840 # Suppress writing compiled files
1841 python="$python -B"
1842
1843 # Check that the C compiler works. Doing this here before testing
1844 # the host CPU ensures that we had a valid CC to autodetect the
1845 # $cpu var (and we should bail right here if that's not the case).
1846 # It also allows the help message to be printed without a CC.
1847 write_c_skeleton;
1848 if compile_object ; then
1849   : C compiler works ok
1850 else
1851     error_exit "\"$cc\" either does not exist or does not work"
1852 fi
1853 if ! compile_prog ; then
1854     error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
1855 fi
1856
1857 # Now we have handled --enable-tcg-interpreter and know we're not just
1858 # printing the help message, bail out if the host CPU isn't supported.
1859 if test "$ARCH" = "unknown"; then
1860     if test "$tcg_interpreter" = "yes" ; then
1861         echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
1862     else
1863         error_exit "Unsupported CPU = $cpu, try --enable-tcg-interpreter"
1864     fi
1865 fi
1866
1867 # Consult white-list to determine whether to enable werror
1868 # by default.  Only enable by default for git builds
1869 if test -z "$werror" ; then
1870     if test -e "$source_path/.git" && \
1871         { test "$linux" = "yes" || test "$mingw32" = "yes"; }; then
1872         werror="yes"
1873     else
1874         werror="no"
1875     fi
1876 fi
1877
1878 if test "$bogus_os" = "yes"; then
1879     # Now that we know that we're not printing the help and that
1880     # the compiler works (so the results of the check_defines we used
1881     # to identify the OS are reliable), if we didn't recognize the
1882     # host OS we should stop now.
1883     error_exit "Unrecognized host OS (uname -s reports '$(uname -s)')"
1884 fi
1885
1886 # Check whether the compiler matches our minimum requirements:
1887 cat > $TMPC << EOF
1888 #if defined(__clang_major__) && defined(__clang_minor__)
1889 # ifdef __apple_build_version__
1890 #  if __clang_major__ < 5 || (__clang_major__ == 5 && __clang_minor__ < 1)
1891 #   error You need at least XCode Clang v5.1 to compile QEMU
1892 #  endif
1893 # else
1894 #  if __clang_major__ < 3 || (__clang_major__ == 3 && __clang_minor__ < 4)
1895 #   error You need at least Clang v3.4 to compile QEMU
1896 #  endif
1897 # endif
1898 #elif defined(__GNUC__) && defined(__GNUC_MINOR__)
1899 # if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)
1900 #  error You need at least GCC v4.8 to compile QEMU
1901 # endif
1902 #else
1903 # error You either need GCC or Clang to compiler QEMU
1904 #endif
1905 int main (void) { return 0; }
1906 EOF
1907 if ! compile_prog "" "" ; then
1908     error_exit "You need at least GCC v4.8 or Clang v3.4 (or XCode Clang v5.1)"
1909 fi
1910
1911 gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
1912 gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
1913 gcc_flags="-Wno-missing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
1914 gcc_flags="-Wendif-labels -Wno-shift-negative-value $gcc_flags"
1915 gcc_flags="-Wno-initializer-overrides -Wexpansion-to-defined $gcc_flags"
1916 gcc_flags="-Wno-string-plus-int -Wno-typedef-redefinition $gcc_flags"
1917 # Note that we do not add -Werror to gcc_flags here, because that would
1918 # enable it for all configure tests. If a configure test failed due
1919 # to -Werror this would just silently disable some features,
1920 # so it's too error prone.
1921
1922 cc_has_warning_flag() {
1923     write_c_skeleton;
1924
1925     # Use the positive sense of the flag when testing for -Wno-wombat
1926     # support (gcc will happily accept the -Wno- form of unknown
1927     # warning options).
1928     optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')"
1929     compile_prog "-Werror $optflag" ""
1930 }
1931
1932 for flag in $gcc_flags; do
1933     if cc_has_warning_flag $flag ; then
1934         QEMU_CFLAGS="$QEMU_CFLAGS $flag"
1935     fi
1936 done
1937
1938 if test "$stack_protector" != "no"; then
1939   cat > $TMPC << EOF
1940 int main(int argc, char *argv[])
1941 {
1942     char arr[64], *p = arr, *c = argv[0];
1943     while (*c) {
1944         *p++ = *c++;
1945     }
1946     return 0;
1947 }
1948 EOF
1949   gcc_flags="-fstack-protector-strong -fstack-protector-all"
1950   sp_on=0
1951   for flag in $gcc_flags; do
1952     # We need to check both a compile and a link, since some compiler
1953     # setups fail only on a .c->.o compile and some only at link time
1954     if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
1955        compile_prog "-Werror $flag" ""; then
1956       QEMU_CFLAGS="$QEMU_CFLAGS $flag"
1957       sp_on=1
1958       break
1959     fi
1960   done
1961   if test "$stack_protector" = yes; then
1962     if test $sp_on = 0; then
1963       error_exit "Stack protector not supported"
1964     fi
1965   fi
1966 fi
1967
1968 # Disable -Wmissing-braces on older compilers that warn even for
1969 # the "universal" C zero initializer {0}.
1970 cat > $TMPC << EOF
1971 struct {
1972   int a[2];
1973 } x = {0};
1974 EOF
1975 if compile_object "-Werror" "" ; then
1976   :
1977 else
1978   QEMU_CFLAGS="$QEMU_CFLAGS -Wno-missing-braces"
1979 fi
1980
1981 # Our module code doesn't support Windows
1982 if test "$modules" = "yes" && test "$mingw32" = "yes" ; then
1983   error_exit "Modules are not available for Windows"
1984 fi
1985
1986 # Static linking is not possible with modules or PIE
1987 if test "$static" = "yes" ; then
1988   if test "$modules" = "yes" ; then
1989     error_exit "static and modules are mutually incompatible"
1990   fi
1991   if test "$pie" = "yes" ; then
1992     error_exit "static and pie are mutually incompatible"
1993   else
1994     pie="no"
1995   fi
1996 fi
1997
1998 # Unconditional check for compiler __thread support
1999   cat > $TMPC << EOF
2000 static __thread int tls_var;
2001 int main(void) { return tls_var; }
2002 EOF
2003
2004 if ! compile_prog "-Werror" "" ; then
2005     error_exit "Your compiler does not support the __thread specifier for " \
2006         "Thread-Local Storage (TLS). Please upgrade to a version that does."
2007 fi
2008
2009 if test "$pie" = ""; then
2010   case "$cpu-$targetos" in
2011     i386-Linux|x86_64-Linux|x32-Linux|i386-OpenBSD|x86_64-OpenBSD)
2012       ;;
2013     *)
2014       pie="no"
2015       ;;
2016   esac
2017 fi
2018
2019 if test "$pie" != "no" ; then
2020   cat > $TMPC << EOF
2021
2022 #ifdef __linux__
2023 #  define THREAD __thread
2024 #else
2025 #  define THREAD
2026 #endif
2027
2028 static THREAD int tls_var;
2029
2030 int main(void) { return tls_var; }
2031
2032 EOF
2033   # check we support --no-pie first...
2034   if compile_prog "-Werror -fno-pie" "-no-pie"; then
2035     CFLAGS_NOPIE="-fno-pie"
2036     LDFLAGS_NOPIE="-nopie"
2037   fi
2038
2039   if compile_prog "-fPIE -DPIE" "-pie"; then
2040     QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS"
2041     LDFLAGS="-pie $LDFLAGS"
2042     pie="yes"
2043     if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then
2044       LDFLAGS="-Wl,-z,relro -Wl,-z,now $LDFLAGS"
2045     fi
2046   else
2047     if test "$pie" = "yes"; then
2048       error_exit "PIE not available due to missing toolchain support"
2049     else
2050       echo "Disabling PIE due to missing toolchain support"
2051       pie="no"
2052     fi
2053   fi
2054 fi
2055
2056 ##########################################
2057 # __sync_fetch_and_and requires at least -march=i486. Many toolchains
2058 # use i686 as default anyway, but for those that don't, an explicit
2059 # specification is necessary
2060
2061 if test "$cpu" = "i386"; then
2062   cat > $TMPC << EOF
2063 static int sfaa(int *ptr)
2064 {
2065   return __sync_fetch_and_and(ptr, 0);
2066 }
2067
2068 int main(void)
2069 {
2070   int val = 42;
2071   val = __sync_val_compare_and_swap(&val, 0, 1);
2072   sfaa(&val);
2073   return val;
2074 }
2075 EOF
2076   if ! compile_prog "" "" ; then
2077     QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
2078   fi
2079 fi
2080
2081 #########################################
2082 # Solaris specific configure tool chain decisions
2083
2084 if test "$solaris" = "yes" ; then
2085   if has $install; then
2086     :
2087   else
2088     error_exit "Solaris install program not found. Use --install=/usr/ucb/install or" \
2089         "install fileutils from www.blastwave.org using pkg-get -i fileutils" \
2090         "to get ginstall which is used by default (which lives in /opt/csw/bin)"
2091   fi
2092   if test "$(path_of $install)" = "/usr/sbin/install" ; then
2093     error_exit "Solaris /usr/sbin/install is not an appropriate install program." \
2094         "try ginstall from the GNU fileutils available from www.blastwave.org" \
2095         "using pkg-get -i fileutils, or use --install=/usr/ucb/install"
2096   fi
2097   if has ar; then
2098     :
2099   else
2100     if test -f /usr/ccs/bin/ar ; then
2101       error_exit "No path includes ar" \
2102           "Add /usr/ccs/bin to your path and rerun configure"
2103     fi
2104     error_exit "No path includes ar"
2105   fi
2106 fi
2107
2108 if test -z "${target_list+xxx}" ; then
2109     for target in $default_target_list; do
2110         supported_target $target 2>/dev/null && \
2111             target_list="$target_list $target"
2112     done
2113     target_list="${target_list# }"
2114 else
2115     target_list=$(echo "$target_list" | sed -e 's/,/ /g')
2116     for target in $target_list; do
2117         # Check that we recognised the target name; this allows a more
2118         # friendly error message than if we let it fall through.
2119         case " $default_target_list " in
2120             *" $target "*)
2121                 ;;
2122             *)
2123                 error_exit "Unknown target name '$target'"
2124                 ;;
2125         esac
2126         supported_target $target || exit 1
2127     done
2128 fi
2129
2130 # see if system emulation was really requested
2131 case " $target_list " in
2132   *"-softmmu "*) softmmu=yes
2133   ;;
2134   *) softmmu=no
2135   ;;
2136 esac
2137
2138 feature_not_found() {
2139   feature=$1
2140   remedy=$2
2141
2142   error_exit "User requested feature $feature" \
2143       "configure was not able to find it." \
2144       "$remedy"
2145 }
2146
2147 # ---
2148 # big/little endian test
2149 cat > $TMPC << EOF
2150 short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
2151 short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
2152 extern int foo(short *, short *);
2153 int main(int argc, char *argv[]) {
2154     return foo(big_endian, little_endian);
2155 }
2156 EOF
2157
2158 if compile_object ; then
2159     if strings -a $TMPO | grep -q BiGeNdIaN ; then
2160         bigendian="yes"
2161     elif strings -a $TMPO | grep -q LiTtLeEnDiAn ; then
2162         bigendian="no"
2163     else
2164         echo big/little test failed
2165     fi
2166 else
2167     echo big/little test failed
2168 fi
2169
2170 ##########################################
2171 # cocoa implies not SDL or GTK
2172 # (the cocoa UI code currently assumes it is always the active UI
2173 # and doesn't interact well with other UI frontend code)
2174 if test "$cocoa" = "yes"; then
2175     if test "$sdl" = "yes"; then
2176         error_exit "Cocoa and SDL UIs cannot both be enabled at once"
2177     fi
2178     if test "$gtk" = "yes"; then
2179         error_exit "Cocoa and GTK UIs cannot both be enabled at once"
2180     fi
2181     gtk=no
2182     sdl=no
2183 fi
2184
2185 # Some versions of Mac OS X incorrectly define SIZE_MAX
2186 cat > $TMPC << EOF
2187 #include <stdint.h>
2188 #include <stdio.h>
2189 int main(int argc, char *argv[]) {
2190     return printf("%zu", SIZE_MAX);
2191 }
2192 EOF
2193 have_broken_size_max=no
2194 if ! compile_object -Werror ; then
2195     have_broken_size_max=yes
2196 fi
2197
2198 ##########################################
2199 # L2TPV3 probe
2200
2201 cat > $TMPC <<EOF
2202 #include <sys/socket.h>
2203 #include <linux/ip.h>
2204 int main(void) { return sizeof(struct mmsghdr); }
2205 EOF
2206 if compile_prog "" "" ; then
2207   l2tpv3=yes
2208 else
2209   l2tpv3=no
2210 fi
2211
2212 #########################################
2213 # vhost interdependencies and host support
2214
2215 # vhost backends
2216 test "$vhost_user" = "" && vhost_user=yes
2217 if test "$vhost_user" = "yes" && test "$mingw32" = "yes"; then
2218   error_exit "vhost-user isn't available on win32"
2219 fi
2220 test "$vhost_kernel" = "" && vhost_kernel=$linux
2221 if test "$vhost_kernel" = "yes" && test "$linux" != "yes"; then
2222   error_exit "vhost-kernel is only available on Linux"
2223 fi
2224
2225 # vhost-kernel devices
2226 test "$vhost_scsi" = "" && vhost_scsi=$vhost_kernel
2227 if test "$vhost_scsi" = "yes" && test "$vhost_kernel" != "yes"; then
2228   error_exit "--enable-vhost-scsi requires --enable-vhost-kernel"
2229 fi
2230 test "$vhost_vsock" = "" && vhost_vsock=$vhost_kernel
2231 if test "$vhost_vsock" = "yes" && test "$vhost_kernel" != "yes"; then
2232   error_exit "--enable-vhost-vsock requires --enable-vhost-kernel"
2233 fi
2234
2235 # vhost-user backends
2236 test "$vhost_net_user" = "" && vhost_net_user=$vhost_user
2237 if test "$vhost_net_user" = "yes" && test "$vhost_user" = "no"; then
2238   error_exit "--enable-vhost-net-user requires --enable-vhost-user"
2239 fi
2240 test "$vhost_crypto" = "" && vhost_crypto=$vhost_user
2241 if test "$vhost_crypto" = "yes" && test "$vhost_user" = "no"; then
2242   error_exit "--enable-vhost-crypto requires --enable-vhost-user"
2243 fi
2244 test "$vhost_user_fs" = "" && vhost_user_fs=$vhost_user
2245 if test "$vhost_user_fs" = "yes" && test "$vhost_user" = "no"; then
2246   error_exit "--enable-vhost-user-fs requires --enable-vhost-user"
2247 fi
2248
2249 # OR the vhost-kernel and vhost-user values for simplicity
2250 if test "$vhost_net" = ""; then
2251   test "$vhost_net_user" = "yes" && vhost_net=yes
2252   test "$vhost_kernel" = "yes" && vhost_net=yes
2253 fi
2254
2255 ##########################################
2256 # MinGW / Mingw-w64 localtime_r/gmtime_r check
2257
2258 if test "$mingw32" = "yes"; then
2259     # Some versions of MinGW / Mingw-w64 lack localtime_r
2260     # and gmtime_r entirely.
2261     #
2262     # Some versions of Mingw-w64 define a macro for
2263     # localtime_r/gmtime_r.
2264     #
2265     # Some versions of Mingw-w64 will define functions
2266     # for localtime_r/gmtime_r, but only if you have
2267     # _POSIX_THREAD_SAFE_FUNCTIONS defined. For fun
2268     # though, unistd.h and pthread.h both define
2269     # that for you.
2270     #
2271     # So this #undef localtime_r and #include <unistd.h>
2272     # are not in fact redundant.
2273 cat > $TMPC << EOF
2274 #include <unistd.h>
2275 #include <time.h>
2276 #undef localtime_r
2277 int main(void) { localtime_r(NULL, NULL); return 0; }
2278 EOF
2279     if compile_prog "" "" ; then
2280         localtime_r="yes"
2281     else
2282         localtime_r="no"
2283     fi
2284 fi
2285
2286 ##########################################
2287 # pkg-config probe
2288
2289 if ! has "$pkg_config_exe"; then
2290   error_exit "pkg-config binary '$pkg_config_exe' not found"
2291 fi
2292
2293 ##########################################
2294 # NPTL probe
2295
2296 if test "$linux_user" = "yes"; then
2297   cat > $TMPC <<EOF
2298 #include <sched.h>
2299 #include <linux/futex.h>
2300 int main(void) {
2301 #if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
2302 #error bork
2303 #endif
2304   return 0;
2305 }
2306 EOF
2307   if ! compile_object ; then
2308     feature_not_found "nptl" "Install glibc and linux kernel headers."
2309   fi
2310 fi
2311
2312 ##########################################
2313 # lzo check
2314
2315 if test "$lzo" != "no" ; then
2316     cat > $TMPC << EOF
2317 #include <lzo/lzo1x.h>
2318 int main(void) { lzo_version(); return 0; }
2319 EOF
2320     if compile_prog "" "-llzo2" ; then
2321         libs_softmmu="$libs_softmmu -llzo2"
2322         lzo="yes"
2323     else
2324         if test "$lzo" = "yes"; then
2325             feature_not_found "liblzo2" "Install liblzo2 devel"
2326         fi
2327         lzo="no"
2328     fi
2329 fi
2330
2331 ##########################################
2332 # snappy check
2333
2334 if test "$snappy" != "no" ; then
2335     cat > $TMPC << EOF
2336 #include <snappy-c.h>
2337 int main(void) { snappy_max_compressed_length(4096); return 0; }
2338 EOF
2339     if compile_prog "" "-lsnappy" ; then
2340         libs_softmmu="$libs_softmmu -lsnappy"
2341         snappy="yes"
2342     else
2343         if test "$snappy" = "yes"; then
2344             feature_not_found "libsnappy" "Install libsnappy devel"
2345         fi
2346         snappy="no"
2347     fi
2348 fi
2349
2350 ##########################################
2351 # bzip2 check
2352
2353 if test "$bzip2" != "no" ; then
2354     cat > $TMPC << EOF
2355 #include <bzlib.h>
2356 int main(void) { BZ2_bzlibVersion(); return 0; }
2357 EOF
2358     if compile_prog "" "-lbz2" ; then
2359         bzip2="yes"
2360     else
2361         if test "$bzip2" = "yes"; then
2362             feature_not_found "libbzip2" "Install libbzip2 devel"
2363         fi
2364         bzip2="no"
2365     fi
2366 fi
2367
2368 ##########################################
2369 # lzfse check
2370
2371 if test "$lzfse" != "no" ; then
2372     cat > $TMPC << EOF
2373 #include <lzfse.h>
2374 int main(void) { lzfse_decode_scratch_size(); return 0; }
2375 EOF
2376     if compile_prog "" "-llzfse" ; then
2377         lzfse="yes"
2378     else
2379         if test "$lzfse" = "yes"; then
2380             feature_not_found "lzfse" "Install lzfse devel"
2381         fi
2382         lzfse="no"
2383     fi
2384 fi
2385
2386 ##########################################
2387 # libseccomp check
2388
2389 if test "$seccomp" != "no" ; then
2390     libseccomp_minver="2.3.0"
2391     if $pkg_config --atleast-version=$libseccomp_minver libseccomp ; then
2392         seccomp_cflags="$($pkg_config --cflags libseccomp)"
2393         seccomp_libs="$($pkg_config --libs libseccomp)"
2394         seccomp="yes"
2395     else
2396         if test "$seccomp" = "yes" ; then
2397             feature_not_found "libseccomp" \
2398                  "Install libseccomp devel >= $libseccomp_minver"
2399         fi
2400         seccomp="no"
2401     fi
2402 fi
2403 ##########################################
2404 # xen probe
2405
2406 if test "$xen" != "no" ; then
2407   # Check whether Xen library path is specified via --extra-ldflags to avoid
2408   # overriding this setting with pkg-config output. If not, try pkg-config
2409   # to obtain all needed flags.
2410
2411   if ! echo $EXTRA_LDFLAGS | grep tools/libxc > /dev/null && \
2412      $pkg_config --exists xencontrol ; then
2413     xen_ctrl_version="$(printf '%d%02d%02d' \
2414       $($pkg_config --modversion xencontrol | sed 's/\./ /g') )"
2415     xen=yes
2416     xen_pc="xencontrol xenstore xenguest xenforeignmemory xengnttab"
2417     xen_pc="$xen_pc xenevtchn xendevicemodel"
2418     if $pkg_config --exists xentoolcore; then
2419       xen_pc="$xen_pc xentoolcore"
2420     fi
2421     QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags $xen_pc)"
2422     libs_softmmu="$($pkg_config --libs $xen_pc) $libs_softmmu"
2423   else
2424
2425     xen_libs="-lxenstore -lxenctrl -lxenguest"
2426     xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
2427
2428     # First we test whether Xen headers and libraries are available.
2429     # If no, we are done and there is no Xen support.
2430     # If yes, more tests are run to detect the Xen version.
2431
2432     # Xen (any)
2433     cat > $TMPC <<EOF
2434 #include <xenctrl.h>
2435 int main(void) {
2436   return 0;
2437 }
2438 EOF
2439     if ! compile_prog "" "$xen_libs" ; then
2440       # Xen not found
2441       if test "$xen" = "yes" ; then
2442         feature_not_found "xen" "Install xen devel"
2443       fi
2444       xen=no
2445
2446     # Xen unstable
2447     elif
2448         cat > $TMPC <<EOF &&
2449 #undef XC_WANT_COMPAT_DEVICEMODEL_API
2450 #define __XEN_TOOLS__
2451 #include <xendevicemodel.h>
2452 #include <xenforeignmemory.h>
2453 int main(void) {
2454   xendevicemodel_handle *xd;
2455   xenforeignmemory_handle *xfmem;
2456
2457   xd = xendevicemodel_open(0, 0);
2458   xendevicemodel_pin_memory_cacheattr(xd, 0, 0, 0, 0);
2459
2460   xfmem = xenforeignmemory_open(0, 0);
2461   xenforeignmemory_map_resource(xfmem, 0, 0, 0, 0, 0, NULL, 0, 0);
2462
2463   return 0;
2464 }
2465 EOF
2466         compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
2467       then
2468       xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
2469       xen_ctrl_version=41100
2470       xen=yes
2471     elif
2472         cat > $TMPC <<EOF &&
2473 #undef XC_WANT_COMPAT_MAP_FOREIGN_API
2474 #include <xenforeignmemory.h>
2475 #include <xentoolcore.h>
2476 int main(void) {
2477   xenforeignmemory_handle *xfmem;
2478
2479   xfmem = xenforeignmemory_open(0, 0);
2480   xenforeignmemory_map2(xfmem, 0, 0, 0, 0, 0, 0, 0);
2481   xentoolcore_restrict_all(0);
2482
2483   return 0;
2484 }
2485 EOF
2486         compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
2487       then
2488       xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
2489       xen_ctrl_version=41000
2490       xen=yes
2491     elif
2492         cat > $TMPC <<EOF &&
2493 #undef XC_WANT_COMPAT_DEVICEMODEL_API
2494 #define __XEN_TOOLS__
2495 #include <xendevicemodel.h>
2496 int main(void) {
2497   xendevicemodel_handle *xd;
2498
2499   xd = xendevicemodel_open(0, 0);
2500   xendevicemodel_close(xd);
2501
2502   return 0;
2503 }
2504 EOF
2505         compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs"
2506       then
2507       xen_stable_libs="-lxendevicemodel $xen_stable_libs"
2508       xen_ctrl_version=40900
2509       xen=yes
2510     elif
2511         cat > $TMPC <<EOF &&
2512 /*
2513  * If we have stable libs the we don't want the libxc compat
2514  * layers, regardless of what CFLAGS we may have been given.
2515  *
2516  * Also, check if xengnttab_grant_copy_segment_t is defined and
2517  * grant copy operation is implemented.
2518  */
2519 #undef XC_WANT_COMPAT_EVTCHN_API
2520 #undef XC_WANT_COMPAT_GNTTAB_API
2521 #undef XC_WANT_COMPAT_MAP_FOREIGN_API
2522 #include <xenctrl.h>
2523 #include <xenstore.h>
2524 #include <xenevtchn.h>
2525 #include <xengnttab.h>
2526 #include <xenforeignmemory.h>
2527 #include <stdint.h>
2528 #include <xen/hvm/hvm_info_table.h>
2529 #if !defined(HVM_MAX_VCPUS)
2530 # error HVM_MAX_VCPUS not defined
2531 #endif
2532 int main(void) {
2533   xc_interface *xc = NULL;
2534   xenforeignmemory_handle *xfmem;
2535   xenevtchn_handle *xe;
2536   xengnttab_handle *xg;
2537   xengnttab_grant_copy_segment_t* seg = NULL;
2538
2539   xs_daemon_open();
2540
2541   xc = xc_interface_open(0, 0, 0);
2542   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2543   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2544   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2545   xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
2546
2547   xfmem = xenforeignmemory_open(0, 0);
2548   xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
2549
2550   xe = xenevtchn_open(0, 0);
2551   xenevtchn_fd(xe);
2552
2553   xg = xengnttab_open(0, 0);
2554   xengnttab_grant_copy(xg, 0, seg);
2555
2556   return 0;
2557 }
2558 EOF
2559         compile_prog "" "$xen_libs $xen_stable_libs"
2560       then
2561       xen_ctrl_version=40800
2562       xen=yes
2563     elif
2564         cat > $TMPC <<EOF &&
2565 /*
2566  * If we have stable libs the we don't want the libxc compat
2567  * layers, regardless of what CFLAGS we may have been given.
2568  */
2569 #undef XC_WANT_COMPAT_EVTCHN_API
2570 #undef XC_WANT_COMPAT_GNTTAB_API
2571 #undef XC_WANT_COMPAT_MAP_FOREIGN_API
2572 #include <xenctrl.h>
2573 #include <xenstore.h>
2574 #include <xenevtchn.h>
2575 #include <xengnttab.h>
2576 #include <xenforeignmemory.h>
2577 #include <stdint.h>
2578 #include <xen/hvm/hvm_info_table.h>
2579 #if !defined(HVM_MAX_VCPUS)
2580 # error HVM_MAX_VCPUS not defined
2581 #endif
2582 int main(void) {
2583   xc_interface *xc = NULL;
2584   xenforeignmemory_handle *xfmem;
2585   xenevtchn_handle *xe;
2586   xengnttab_handle *xg;
2587
2588   xs_daemon_open();
2589
2590   xc = xc_interface_open(0, 0, 0);
2591   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2592   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2593   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2594   xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
2595
2596   xfmem = xenforeignmemory_open(0, 0);
2597   xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
2598
2599   xe = xenevtchn_open(0, 0);
2600   xenevtchn_fd(xe);
2601
2602   xg = xengnttab_open(0, 0);
2603   xengnttab_map_grant_ref(xg, 0, 0, 0);
2604
2605   return 0;
2606 }
2607 EOF
2608         compile_prog "" "$xen_libs $xen_stable_libs"
2609       then
2610       xen_ctrl_version=40701
2611       xen=yes
2612
2613     # Xen 4.6
2614     elif
2615         cat > $TMPC <<EOF &&
2616 #include <xenctrl.h>
2617 #include <xenstore.h>
2618 #include <stdint.h>
2619 #include <xen/hvm/hvm_info_table.h>
2620 #if !defined(HVM_MAX_VCPUS)
2621 # error HVM_MAX_VCPUS not defined
2622 #endif
2623 int main(void) {
2624   xc_interface *xc;
2625   xs_daemon_open();
2626   xc = xc_interface_open(0, 0, 0);
2627   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2628   xc_gnttab_open(NULL, 0);
2629   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2630   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2631   xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
2632   xc_reserved_device_memory_map(xc, 0, 0, 0, 0, NULL, 0);
2633   return 0;
2634 }
2635 EOF
2636         compile_prog "" "$xen_libs"
2637       then
2638       xen_ctrl_version=40600
2639       xen=yes
2640
2641     # Xen 4.5
2642     elif
2643         cat > $TMPC <<EOF &&
2644 #include <xenctrl.h>
2645 #include <xenstore.h>
2646 #include <stdint.h>
2647 #include <xen/hvm/hvm_info_table.h>
2648 #if !defined(HVM_MAX_VCPUS)
2649 # error HVM_MAX_VCPUS not defined
2650 #endif
2651 int main(void) {
2652   xc_interface *xc;
2653   xs_daemon_open();
2654   xc = xc_interface_open(0, 0, 0);
2655   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2656   xc_gnttab_open(NULL, 0);
2657   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2658   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2659   xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
2660   return 0;
2661 }
2662 EOF
2663         compile_prog "" "$xen_libs"
2664       then
2665       xen_ctrl_version=40500
2666       xen=yes
2667
2668     elif
2669         cat > $TMPC <<EOF &&
2670 #include <xenctrl.h>
2671 #include <xenstore.h>
2672 #include <stdint.h>
2673 #include <xen/hvm/hvm_info_table.h>
2674 #if !defined(HVM_MAX_VCPUS)
2675 # error HVM_MAX_VCPUS not defined
2676 #endif
2677 int main(void) {
2678   xc_interface *xc;
2679   xs_daemon_open();
2680   xc = xc_interface_open(0, 0, 0);
2681   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2682   xc_gnttab_open(NULL, 0);
2683   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2684   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2685   return 0;
2686 }
2687 EOF
2688         compile_prog "" "$xen_libs"
2689       then
2690       xen_ctrl_version=40200
2691       xen=yes
2692
2693     else
2694       if test "$xen" = "yes" ; then
2695         feature_not_found "xen (unsupported version)" \
2696                           "Install a supported xen (xen 4.2 or newer)"
2697       fi
2698       xen=no
2699     fi
2700
2701     if test "$xen" = yes; then
2702       if test $xen_ctrl_version -ge 40701  ; then
2703         libs_softmmu="$xen_stable_libs $libs_softmmu"
2704       fi
2705       libs_softmmu="$xen_libs $libs_softmmu"
2706     fi
2707   fi
2708 fi
2709
2710 if test "$xen_pci_passthrough" != "no"; then
2711   if test "$xen" = "yes" && test "$linux" = "yes"; then
2712     xen_pci_passthrough=yes
2713   else
2714     if test "$xen_pci_passthrough" = "yes"; then
2715       error_exit "User requested feature Xen PCI Passthrough" \
2716           " but this feature requires /sys from Linux"
2717     fi
2718     xen_pci_passthrough=no
2719   fi
2720 fi
2721
2722 ##########################################
2723 # Windows Hypervisor Platform accelerator (WHPX) check
2724 if test "$whpx" != "no" ; then
2725     if check_include "WinHvPlatform.h" && check_include "WinHvEmulation.h"; then
2726         whpx="yes"
2727     else
2728         if test "$whpx" = "yes"; then
2729             feature_not_found "WinHvPlatform" "WinHvEmulation is not installed"
2730         fi
2731         whpx="no"
2732     fi
2733 fi
2734
2735 ##########################################
2736 # Sparse probe
2737 if test "$sparse" != "no" ; then
2738   if has cgcc; then
2739     sparse=yes
2740   else
2741     if test "$sparse" = "yes" ; then
2742       feature_not_found "sparse" "Install sparse binary"
2743     fi
2744     sparse=no
2745   fi
2746 fi
2747
2748 ##########################################
2749 # X11 probe
2750 if $pkg_config --exists "x11"; then
2751     have_x11=yes
2752     x11_cflags=$($pkg_config --cflags x11)
2753     x11_libs=$($pkg_config --libs x11)
2754 fi
2755
2756 ##########################################
2757 # GTK probe
2758
2759 if test "$gtk" != "no"; then
2760     gtkpackage="gtk+-3.0"
2761     gtkx11package="gtk+-x11-3.0"
2762     gtkversion="3.14.0"
2763     if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
2764         gtk_cflags=$($pkg_config --cflags $gtkpackage)
2765         gtk_libs=$($pkg_config --libs $gtkpackage)
2766         gtk_version=$($pkg_config --modversion $gtkpackage)
2767         if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
2768             need_x11=yes
2769             gtk_cflags="$gtk_cflags $x11_cflags"
2770             gtk_libs="$gtk_libs $x11_libs"
2771         fi
2772         gtk="yes"
2773     elif test "$gtk" = "yes"; then
2774         feature_not_found "gtk" "Install gtk3-devel"
2775     else
2776         gtk="no"
2777     fi
2778 fi
2779
2780
2781 ##########################################
2782 # GNUTLS probe
2783
2784 if test "$gnutls" != "no"; then
2785     pass="no"
2786     if $pkg_config --exists "gnutls >= 3.1.18"; then
2787         gnutls_cflags=$($pkg_config --cflags gnutls)
2788         gnutls_libs=$($pkg_config --libs gnutls)
2789         # Packaging for the static libraries is not always correct.
2790         # At least ubuntu 18.04 ships only shared libraries.
2791         write_c_skeleton
2792         if compile_prog "" "$gnutls_libs" ; then
2793             LIBS="$gnutls_libs $LIBS"
2794             QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags"
2795             pass="yes"
2796         fi
2797     fi
2798     if test "$pass" = "no" && test "$gnutls" = "yes"; then
2799         feature_not_found "gnutls" "Install gnutls devel >= 3.1.18"
2800     else
2801         gnutls="$pass"
2802     fi
2803 fi
2804
2805
2806 # If user didn't give a --disable/enable-gcrypt flag,
2807 # then mark as disabled if user requested nettle
2808 # explicitly
2809 if test -z "$gcrypt"
2810 then
2811     if test "$nettle" = "yes"
2812     then
2813         gcrypt="no"
2814     fi
2815 fi
2816
2817 # If user didn't give a --disable/enable-nettle flag,
2818 # then mark as disabled if user requested gcrypt
2819 # explicitly
2820 if test -z "$nettle"
2821 then
2822     if test "$gcrypt" = "yes"
2823     then
2824         nettle="no"
2825     fi
2826 fi
2827
2828 has_libgcrypt() {
2829     if ! has "libgcrypt-config"
2830     then
2831         return 1
2832     fi
2833
2834     if test -n "$cross_prefix"
2835     then
2836         host=$(libgcrypt-config --host)
2837         if test "$host-" != $cross_prefix
2838         then
2839             return 1
2840         fi
2841     fi
2842
2843     maj=`libgcrypt-config --version | awk -F . '{print $1}'`
2844     min=`libgcrypt-config --version | awk -F . '{print $2}'`
2845
2846     if test $maj != 1 || test $min -lt 5
2847     then
2848        return 1
2849     fi
2850
2851     return 0
2852 }
2853
2854
2855 if test "$nettle" != "no"; then
2856     pass="no"
2857     if $pkg_config --exists "nettle >= 2.7.1"; then
2858         nettle_cflags=$($pkg_config --cflags nettle)
2859         nettle_libs=$($pkg_config --libs nettle)
2860         nettle_version=$($pkg_config --modversion nettle)
2861         # Link test to make sure the given libraries work (e.g for static).
2862         write_c_skeleton
2863         if compile_prog "" "$nettle_libs" ; then
2864             LIBS="$nettle_libs $LIBS"
2865             QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
2866             if test -z "$gcrypt"; then
2867                gcrypt="no"
2868             fi
2869             pass="yes"
2870         fi
2871     fi
2872     if test "$pass" = "no" && test "$nettle" = "yes"; then
2873         feature_not_found "nettle" "Install nettle devel >= 2.7.1"
2874     else
2875         nettle="$pass"
2876     fi
2877 fi
2878
2879 if test "$gcrypt" != "no"; then
2880     pass="no"
2881     if has_libgcrypt; then
2882         gcrypt_cflags=$(libgcrypt-config --cflags)
2883         gcrypt_libs=$(libgcrypt-config --libs)
2884         # Debian has removed -lgpg-error from libgcrypt-config
2885         # as it "spreads unnecessary dependencies" which in
2886         # turn breaks static builds...
2887         if test "$static" = "yes"
2888         then
2889             gcrypt_libs="$gcrypt_libs -lgpg-error"
2890         fi
2891
2892         # Link test to make sure the given libraries work (e.g for static).
2893         write_c_skeleton
2894         if compile_prog "" "$gcrypt_libs" ; then
2895             LIBS="$gcrypt_libs $LIBS"
2896             QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
2897             pass="yes"
2898         fi
2899     fi
2900     if test "$pass" = "yes"; then
2901         gcrypt="yes"
2902         cat > $TMPC << EOF
2903 #include <gcrypt.h>
2904 int main(void) {
2905   gcry_mac_hd_t handle;
2906   gcry_mac_open(&handle, GCRY_MAC_HMAC_MD5,
2907                 GCRY_MAC_FLAG_SECURE, NULL);
2908   return 0;
2909 }
2910 EOF
2911         if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
2912             gcrypt_hmac=yes
2913         fi
2914     elif test "$gcrypt" = "yes"; then
2915         feature_not_found "gcrypt" "Install gcrypt devel >= 1.5.0"
2916     else
2917         gcrypt="no"
2918     fi
2919 fi
2920
2921
2922 if test "$gcrypt" = "yes" && test "$nettle" = "yes"
2923 then
2924     error_exit "Only one of gcrypt & nettle can be enabled"
2925 fi
2926
2927 ##########################################
2928 # libtasn1 - only for the TLS creds/session test suite
2929
2930 tasn1=yes
2931 tasn1_cflags=""
2932 tasn1_libs=""
2933 if $pkg_config --exists "libtasn1"; then
2934     tasn1_cflags=$($pkg_config --cflags libtasn1)
2935     tasn1_libs=$($pkg_config --libs libtasn1)
2936 else
2937     tasn1=no
2938 fi
2939
2940
2941 ##########################################
2942 # PAM probe
2943
2944 if test "$auth_pam" != "no"; then
2945     cat > $TMPC <<EOF
2946 #include <security/pam_appl.h>
2947 #include <stdio.h>
2948 int main(void) {
2949    const char *service_name = "qemu";
2950    const char *user = "frank";
2951    const struct pam_conv pam_conv = { 0 };
2952    pam_handle_t *pamh = NULL;
2953    pam_start(service_name, user, &pam_conv, &pamh);
2954    return 0;
2955 }
2956 EOF
2957     if compile_prog "" "-lpam" ; then
2958         auth_pam=yes
2959     else
2960         if test "$auth_pam" = "yes"; then
2961             feature_not_found "PAM" "Install PAM development package"
2962         else
2963             auth_pam=no
2964         fi
2965     fi
2966 fi
2967
2968 ##########################################
2969 # getifaddrs (for tests/test-io-channel-socket )
2970
2971 have_ifaddrs_h=yes
2972 if ! check_include "ifaddrs.h" ; then
2973   have_ifaddrs_h=no
2974 fi
2975
2976 ##########################################
2977 # VTE probe
2978
2979 if test "$vte" != "no"; then
2980     vteminversion="0.32.0"
2981     if $pkg_config --exists "vte-2.91"; then
2982       vtepackage="vte-2.91"
2983     else
2984       vtepackage="vte-2.90"
2985     fi
2986     if $pkg_config --exists "$vtepackage >= $vteminversion"; then
2987         vte_cflags=$($pkg_config --cflags $vtepackage)
2988         vte_libs=$($pkg_config --libs $vtepackage)
2989         vteversion=$($pkg_config --modversion $vtepackage)
2990         vte="yes"
2991     elif test "$vte" = "yes"; then
2992         feature_not_found "vte" "Install libvte-2.90/2.91 devel"
2993     else
2994         vte="no"
2995     fi
2996 fi
2997
2998 ##########################################
2999 # SDL probe
3000
3001 # Look for sdl configuration program (pkg-config or sdl2-config).  Try
3002 # sdl2-config even without cross prefix, and favour pkg-config over sdl2-config.
3003
3004 sdl_probe ()
3005 {
3006   if $pkg_config sdl2 --exists; then
3007     sdlconfig="$pkg_config sdl2"
3008     sdlversion=$($sdlconfig --modversion 2>/dev/null)
3009   elif has "$sdl2_config"; then
3010     sdlconfig="$sdl2_config"
3011     sdlversion=$($sdlconfig --version)
3012   else
3013     if test "$sdl" = "yes" ; then
3014       feature_not_found "sdl" "Install SDL2-devel"
3015     fi
3016     sdl=no
3017     # no need to do the rest
3018     return
3019   fi
3020   if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl2-config; then
3021     echo warning: using "\"$sdlconfig\"" to detect cross-compiled sdl >&2
3022   fi
3023
3024   cat > $TMPC << EOF
3025 #include <SDL.h>
3026 #undef main /* We don't want SDL to override our main() */
3027 int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
3028 EOF
3029   sdl_cflags=$($sdlconfig --cflags 2>/dev/null)
3030   sdl_cflags="$sdl_cflags -Wno-undef"  # workaround 2.0.8 bug
3031   if test "$static" = "yes" ; then
3032     if $pkg_config sdl2 --exists; then
3033       sdl_libs=$($pkg_config sdl2 --static --libs 2>/dev/null)
3034     else
3035       sdl_libs=$($sdlconfig --static-libs 2>/dev/null)
3036     fi
3037   else
3038     sdl_libs=$($sdlconfig --libs 2>/dev/null)
3039   fi
3040   if compile_prog "$sdl_cflags" "$sdl_libs" ; then
3041     sdl=yes
3042
3043     # static link with sdl ? (note: sdl.pc's --static --libs is broken)
3044     if test "$sdl" = "yes" && test "$static" = "yes" ; then
3045       if test $? = 0 && echo $sdl_libs | grep -- -laa > /dev/null; then
3046          sdl_libs="$sdl_libs $(aalib-config --static-libs 2>/dev/null)"
3047          sdl_cflags="$sdl_cflags $(aalib-config --cflags 2>/dev/null)"
3048       fi
3049       if compile_prog "$sdl_cflags" "$sdl_libs" ; then
3050         :
3051       else
3052         sdl=no
3053       fi
3054     fi # static link
3055   else # sdl not found
3056     if test "$sdl" = "yes" ; then
3057       feature_not_found "sdl" "Install SDL2 devel"
3058     fi
3059     sdl=no
3060   fi # sdl compile test
3061 }
3062
3063 sdl_image_probe ()
3064 {
3065     if test "$sdl_image" != "no" ; then
3066         if $pkg_config SDL2_image --exists; then
3067             if test "$static" = "yes"; then
3068                 sdl_image_libs=$($pkg_config SDL2_image --libs --static 2>/dev/null)
3069             else
3070                 sdl_image_libs=$($pkg_config SDL2_image --libs 2>/dev/null)
3071             fi
3072             sdl_image_cflags=$($pkg_config SDL2_image --cflags 2>/dev/null)
3073             sdl_image=yes
3074
3075             sdl_cflags="$sdl_cflags $sdl_image_cflags"
3076             sdl_libs="$sdl_libs $sdl_image_libs"
3077         else
3078             if test "$sdl_image" = "yes" ; then
3079                 feature_not_found "sdl_image" "Install SDL Image devel"
3080             else
3081                 sdl_image=no
3082             fi
3083         fi
3084     fi
3085 }
3086
3087 if test "$sdl" != "no" ; then
3088   sdl_probe
3089 fi
3090
3091 if test "$sdl" = "yes" ; then
3092   sdl_image_probe
3093 else
3094   if test "$sdl_image" = "yes"; then
3095     echo "warning: SDL Image requested, but SDL is not available, disabling"
3096   fi
3097   sdl_image=no
3098 fi
3099
3100 if test "$sdl" = "yes" ; then
3101   cat > $TMPC <<EOF
3102 #include <SDL.h>
3103 #if defined(SDL_VIDEO_DRIVER_X11)
3104 #include <X11/XKBlib.h>
3105 #else
3106 #error No x11 support
3107 #endif
3108 int main(void) { return 0; }
3109 EOF
3110   if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then
3111     need_x11=yes
3112     sdl_cflags="$sdl_cflags $x11_cflags"
3113     sdl_libs="$sdl_libs $x11_libs"
3114   fi
3115 fi
3116
3117 ##########################################
3118 # RDMA needs OpenFabrics libraries
3119 if test "$rdma" != "no" ; then
3120   cat > $TMPC <<EOF
3121 #include <rdma/rdma_cma.h>
3122 int main(void) { return 0; }
3123 EOF
3124   rdma_libs="-lrdmacm -libverbs -libumad"
3125   if compile_prog "" "$rdma_libs" ; then
3126     rdma="yes"
3127     libs_softmmu="$libs_softmmu $rdma_libs"
3128   else
3129     if test "$rdma" = "yes" ; then
3130         error_exit \
3131             " OpenFabrics librdmacm/libibverbs/libibumad not present." \
3132             " Your options:" \
3133             "  (1) Fast: Install infiniband packages (devel) from your distro." \
3134             "  (2) Cleanest: Install libraries from www.openfabrics.org" \
3135             "  (3) Also: Install softiwarp if you don't have RDMA hardware"
3136     fi
3137     rdma="no"
3138   fi
3139 fi
3140
3141 ##########################################
3142 # PVRDMA detection
3143
3144 cat > $TMPC <<EOF &&
3145 #include <sys/mman.h>
3146
3147 int
3148 main(void)
3149 {
3150     char buf = 0;
3151     void *addr = &buf;
3152     addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED);
3153
3154     return 0;
3155 }
3156 EOF
3157
3158 if test "$rdma" = "yes" ; then
3159     case "$pvrdma" in
3160     "")
3161         if compile_prog "" ""; then
3162             pvrdma="yes"
3163         else
3164             pvrdma="no"
3165         fi
3166         ;;
3167     "yes")
3168         if ! compile_prog "" ""; then
3169             error_exit "PVRDMA is not supported since mremap is not implemented"
3170         fi
3171         pvrdma="yes"
3172         ;;
3173     "no")
3174         pvrdma="no"
3175         ;;
3176     esac
3177 else
3178     if test "$pvrdma" = "yes" ; then
3179         error_exit "PVRDMA requires rdma suppport"
3180     fi
3181     pvrdma="no"
3182 fi
3183
3184 ##########################################
3185 # VNC SASL detection
3186 if test "$vnc" = "yes" && test "$vnc_sasl" != "no" ; then
3187   cat > $TMPC <<EOF
3188 #include <sasl/sasl.h>
3189 #include <stdio.h>
3190 int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
3191 EOF
3192   # Assuming Cyrus-SASL installed in /usr prefix
3193   vnc_sasl_cflags=""
3194   vnc_sasl_libs="-lsasl2"
3195   if compile_prog "$vnc_sasl_cflags" "$vnc_sasl_libs" ; then
3196     vnc_sasl=yes
3197     libs_softmmu="$vnc_sasl_libs $libs_softmmu"
3198     QEMU_CFLAGS="$QEMU_CFLAGS $vnc_sasl_cflags"
3199   else
3200     if test "$vnc_sasl" = "yes" ; then
3201       feature_not_found "vnc-sasl" "Install Cyrus SASL devel"
3202     fi
3203     vnc_sasl=no
3204   fi
3205 fi
3206
3207 ##########################################
3208 # VNC JPEG detection
3209 if test "$vnc" = "yes" && test "$vnc_jpeg" != "no" ; then
3210 cat > $TMPC <<EOF
3211 #include <stdio.h>
3212 #include <jpeglib.h>
3213 int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; }
3214 EOF
3215     vnc_jpeg_cflags=""
3216     vnc_jpeg_libs="-ljpeg"
3217   if compile_prog "$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then
3218     vnc_jpeg=yes
3219     libs_softmmu="$vnc_jpeg_libs $libs_softmmu"
3220     QEMU_CFLAGS="$QEMU_CFLAGS $vnc_jpeg_cflags"
3221   else
3222     if test "$vnc_jpeg" = "yes" ; then
3223       feature_not_found "vnc-jpeg" "Install libjpeg-turbo devel"
3224     fi
3225     vnc_jpeg=no
3226   fi
3227 fi
3228
3229 ##########################################
3230 # VNC PNG detection
3231 if test "$vnc" = "yes" && test "$vnc_png" != "no" ; then
3232 cat > $TMPC <<EOF
3233 //#include <stdio.h>
3234 #include <png.h>
3235 #include <stddef.h>
3236 int main(void) {
3237     png_structp png_ptr;
3238     png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL);
3239     return png_ptr != 0;
3240 }
3241 EOF
3242   if $pkg_config libpng --exists; then
3243     vnc_png_cflags=$($pkg_config libpng --cflags)
3244     vnc_png_libs=$($pkg_config libpng --libs)
3245   else
3246     vnc_png_cflags=""
3247     vnc_png_libs="-lpng"
3248   fi
3249   if compile_prog "$vnc_png_cflags" "$vnc_png_libs" ; then
3250     vnc_png=yes
3251     libs_softmmu="$vnc_png_libs $libs_softmmu"
3252     QEMU_CFLAGS="$QEMU_CFLAGS $vnc_png_cflags"
3253   else
3254     if test "$vnc_png" = "yes" ; then
3255       feature_not_found "vnc-png" "Install libpng devel"
3256     fi
3257     vnc_png=no
3258   fi
3259 fi
3260
3261 ##########################################
3262 # xkbcommon probe
3263 if test "$xkbcommon" != "no" ; then
3264   if $pkg_config xkbcommon --exists; then
3265     xkbcommon_cflags=$($pkg_config xkbcommon --cflags)
3266     xkbcommon_libs=$($pkg_config xkbcommon --libs)
3267     xkbcommon=yes
3268   else
3269     if test "$xkbcommon" = "yes" ; then
3270       feature_not_found "xkbcommon" "Install libxkbcommon-devel"
3271     fi
3272     xkbcommon=no
3273   fi
3274 fi
3275
3276
3277 ##########################################
3278 # xfsctl() probe, used for file-posix.c
3279 if test "$xfs" != "no" ; then
3280   cat > $TMPC << EOF
3281 #include <stddef.h>  /* NULL */
3282 #include <xfs/xfs.h>
3283 int main(void)
3284 {
3285     xfsctl(NULL, 0, 0, NULL);
3286     return 0;
3287 }
3288 EOF
3289   if compile_prog "" "" ; then
3290     xfs="yes"
3291   else
3292     if test "$xfs" = "yes" ; then
3293       feature_not_found "xfs" "Instal xfsprogs/xfslibs devel"
3294     fi
3295     xfs=no
3296   fi
3297 fi
3298
3299 ##########################################
3300 # vde libraries probe
3301 if test "$vde" != "no" ; then
3302   vde_libs="-lvdeplug"
3303   cat > $TMPC << EOF
3304 #include <libvdeplug.h>
3305 int main(void)
3306 {
3307     struct vde_open_args a = {0, 0, 0};
3308     char s[] = "";
3309     vde_open(s, s, &a);
3310     return 0;
3311 }
3312 EOF
3313   if compile_prog "" "$vde_libs" ; then
3314     vde=yes
3315   else
3316     if test "$vde" = "yes" ; then
3317       feature_not_found "vde" "Install vde (Virtual Distributed Ethernet) devel"
3318     fi
3319     vde=no
3320   fi
3321 fi
3322
3323 ##########################################
3324 # netmap support probe
3325 # Apart from looking for netmap headers, we make sure that the host API version
3326 # supports the netmap backend (>=11). The upper bound (15) is meant to simulate
3327 # a minor/major version number. Minor new features will be marked with values up
3328 # to 15, and if something happens that requires a change to the backend we will
3329 # move above 15, submit the backend fixes and modify this two bounds.
3330 if test "$netmap" != "no" ; then
3331   cat > $TMPC << EOF
3332 #include <inttypes.h>
3333 #include <net/if.h>
3334 #include <net/netmap.h>
3335 #include <net/netmap_user.h>
3336 #if (NETMAP_API < 11) || (NETMAP_API > 15)
3337 #error
3338 #endif
3339 int main(void) { return 0; }
3340 EOF
3341   if compile_prog "" "" ; then
3342     netmap=yes
3343   else
3344     if test "$netmap" = "yes" ; then
3345       feature_not_found "netmap"
3346     fi
3347     netmap=no
3348   fi
3349 fi
3350
3351 ##########################################
3352 # libcap-ng library probe
3353 if test "$cap_ng" != "no" ; then
3354   cap_libs="-lcap-ng"
3355   cat > $TMPC << EOF
3356 #include <cap-ng.h>
3357 int main(void)
3358 {
3359     capng_capability_to_name(CAPNG_EFFECTIVE);
3360     return 0;
3361 }
3362 EOF
3363   if compile_prog "" "$cap_libs" ; then
3364     cap_ng=yes
3365     libs_tools="$cap_libs $libs_tools"
3366   else
3367     if test "$cap_ng" = "yes" ; then
3368       feature_not_found "cap_ng" "Install libcap-ng devel"
3369     fi
3370     cap_ng=no
3371   fi
3372 fi
3373
3374 ##########################################
3375 # Sound support libraries probe
3376
3377 audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
3378 for drv in $audio_drv_list; do
3379     case $drv in
3380     alsa | try-alsa)
3381     if $pkg_config alsa --exists; then
3382         alsa_libs=$($pkg_config alsa --libs)
3383         if test "$drv" = "try-alsa"; then
3384             audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-alsa/alsa/')
3385         fi
3386     else
3387         if test "$drv" = "try-alsa"; then
3388             audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-alsa//')
3389         else
3390             error_exit "$drv check failed" \
3391                 "Make sure to have the $drv libs and headers installed."
3392         fi
3393     fi
3394     ;;
3395
3396     pa | try-pa)
3397     if $pkg_config libpulse --exists; then
3398         pulse_libs=$($pkg_config libpulse --libs)
3399         if test "$drv" = "try-pa"; then
3400             audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-pa/pa/')
3401         fi
3402     else
3403         if test "$drv" = "try-pa"; then
3404             audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-pa//')
3405         else
3406             error_exit "$drv check failed" \
3407                 "Make sure to have the $drv libs and headers installed."
3408         fi
3409     fi
3410     ;;
3411
3412     sdl)
3413     if test "$sdl" = "no"; then
3414         error_exit "sdl not found or disabled, can not use sdl audio driver"
3415     fi
3416     ;;
3417
3418     try-sdl)
3419     if test "$sdl" = "no"; then
3420         audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-sdl//')
3421     else
3422         audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-sdl/sdl/')
3423     fi
3424     ;;
3425
3426     coreaudio)
3427       coreaudio_libs="-framework CoreAudio"
3428     ;;
3429
3430     dsound)
3431       dsound_libs="-lole32 -ldxguid"
3432       audio_win_int="yes"
3433     ;;
3434
3435     oss)
3436       oss_libs="$oss_lib"
3437     ;;
3438
3439     *)
3440     echo "$audio_possible_drivers" | grep -q "\<$drv\>" || {
3441         error_exit "Unknown driver '$drv' selected" \
3442             "Possible drivers are: $audio_possible_drivers"
3443     }
3444     ;;
3445     esac
3446 done
3447
3448 ##########################################
3449 # BrlAPI probe
3450
3451 if test "$brlapi" != "no" ; then
3452   brlapi_libs="-lbrlapi"
3453   cat > $TMPC << EOF
3454 #include <brlapi.h>
3455 #include <stddef.h>
3456 int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
3457 EOF
3458   if compile_prog "" "$brlapi_libs" ; then
3459     brlapi=yes
3460   else
3461     if test "$brlapi" = "yes" ; then
3462       feature_not_found "brlapi" "Install brlapi devel"
3463     fi
3464     brlapi=no
3465   fi
3466 fi
3467
3468 ##########################################
3469 # iconv probe
3470 if test "$iconv" != "no" ; then
3471   cat > $TMPC << EOF
3472 #include <iconv.h>
3473 int main(void) {
3474   iconv_t conv = iconv_open("WCHAR_T", "UCS-2");
3475   return conv != (iconv_t) -1;
3476 }
3477 EOF
3478   iconv_prefix_list="/usr/local:/usr"
3479   iconv_lib_list=":-liconv"
3480   IFS=:
3481   for iconv_prefix in $iconv_prefix_list; do
3482     IFS=:
3483     iconv_cflags="-I$iconv_prefix/include"
3484     iconv_ldflags="-L$iconv_prefix/lib"
3485     for iconv_link in $iconv_lib_list; do
3486       unset IFS
3487       iconv_lib="$iconv_ldflags $iconv_link"
3488       echo "looking at iconv in '$iconv_cflags' '$iconv_lib'" >> config.log
3489       if compile_prog "$iconv_cflags" "$iconv_lib" ; then
3490         iconv_found=yes
3491         break
3492       fi
3493     done
3494     if test "$iconv_found" = yes ; then
3495       break
3496     fi
3497   done
3498   if test "$iconv_found" = "yes" ; then
3499     iconv=yes
3500   else
3501     if test "$iconv" = "yes" ; then
3502       feature_not_found "iconv" "Install iconv devel"
3503     fi
3504     iconv=no
3505   fi
3506 fi
3507
3508 ##########################################
3509 # curses probe
3510 if test "$iconv" = "no" ; then
3511   # curses will need iconv
3512   curses=no
3513 fi
3514 if test "$curses" != "no" ; then
3515   if test "$mingw32" = "yes" ; then
3516     curses_inc_list="$($pkg_config --cflags ncurses 2>/dev/null):"
3517     curses_lib_list="$($pkg_config --libs ncurses 2>/dev/null):-lpdcurses"
3518   else
3519     curses_inc_list="$($pkg_config --cflags ncursesw 2>/dev/null):-I/usr/include/ncursesw:"
3520     curses_lib_list="$($pkg_config --libs ncursesw 2>/dev/null):-lncursesw:-lcursesw"
3521   fi
3522   curses_found=no
3523   cat > $TMPC << EOF
3524 #include <locale.h>
3525 #include <curses.h>
3526 #include <wchar.h>
3527 #include <langinfo.h>
3528 int main(void) {
3529   const char *codeset;
3530   wchar_t wch = L'w';
3531   setlocale(LC_ALL, "");
3532   resize_term(0, 0);
3533   addwstr(L"wide chars\n");
3534   addnwstr(&wch, 1);
3535   add_wch(WACS_DEGREE);
3536   codeset = nl_langinfo(CODESET);
3537   return codeset != 0;
3538 }
3539 EOF
3540   IFS=:
3541   for curses_inc in $curses_inc_list; do
3542     # Make sure we get the wide character prototypes
3543     curses_inc="-DNCURSES_WIDECHAR $curses_inc"
3544     IFS=:
3545     for curses_lib in $curses_lib_list; do
3546       unset IFS
3547       if compile_prog "$curses_inc" "$curses_lib" ; then
3548         curses_found=yes
3549         break
3550       fi
3551     done
3552     if test "$curses_found" = yes ; then
3553       break
3554     fi
3555   done
3556   unset IFS
3557   if test "$curses_found" = "yes" ; then
3558     curses=yes
3559   else
3560     if test "$curses" = "yes" ; then
3561       feature_not_found "curses" "Install ncurses devel"
3562     fi
3563     curses=no
3564   fi
3565 fi
3566
3567 ##########################################
3568 # curl probe
3569 if test "$curl" != "no" ; then
3570   if $pkg_config libcurl --exists; then
3571     curlconfig="$pkg_config libcurl"
3572   else
3573     curlconfig=curl-config
3574   fi
3575   cat > $TMPC << EOF
3576 #include <curl/curl.h>
3577 int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
3578 EOF
3579   curl_cflags=$($curlconfig --cflags 2>/dev/null)
3580   curl_libs=$($curlconfig --libs 2>/dev/null)
3581   if compile_prog "$curl_cflags" "$curl_libs" ; then
3582     curl=yes
3583   else
3584     if test "$curl" = "yes" ; then
3585       feature_not_found "curl" "Install libcurl devel"
3586     fi
3587     curl=no
3588   fi
3589 fi # test "$curl"
3590
3591 ##########################################
3592 # bluez support probe
3593 if test "$bluez" != "no" ; then
3594   cat > $TMPC << EOF
3595 #include <bluetooth/bluetooth.h>
3596 int main(void) { return bt_error(0); }
3597 EOF
3598   bluez_cflags=$($pkg_config --cflags bluez 2>/dev/null)
3599   bluez_libs=$($pkg_config --libs bluez 2>/dev/null)
3600   if compile_prog "$bluez_cflags" "$bluez_libs" ; then
3601     bluez=yes
3602     libs_softmmu="$bluez_libs $libs_softmmu"
3603   else
3604     if test "$bluez" = "yes" ; then
3605       feature_not_found "bluez" "Install bluez-libs/libbluetooth devel"
3606     fi
3607     bluez="no"
3608   fi
3609 fi
3610
3611 ##########################################
3612 # glib support probe
3613
3614 glib_req_ver=2.48
3615 glib_modules=gthread-2.0
3616 if test "$modules" = yes; then
3617     glib_modules="$glib_modules gmodule-export-2.0"
3618 fi
3619
3620 # This workaround is required due to a bug in pkg-config file for glib as it
3621 # doesn't define GLIB_STATIC_COMPILATION for pkg-config --static
3622
3623 if test "$static" = yes && test "$mingw32" = yes; then
3624     QEMU_CFLAGS="-DGLIB_STATIC_COMPILATION $QEMU_CFLAGS"
3625 fi
3626
3627 for i in $glib_modules; do
3628     if $pkg_config --atleast-version=$glib_req_ver $i; then
3629         glib_cflags=$($pkg_config --cflags $i)
3630         glib_libs=$($pkg_config --libs $i)
3631         QEMU_CFLAGS="$glib_cflags $QEMU_CFLAGS"
3632         LIBS="$glib_libs $LIBS"
3633         libs_qga="$glib_libs $libs_qga"
3634     else
3635         error_exit "glib-$glib_req_ver $i is required to compile QEMU"
3636     fi
3637 done
3638
3639 if $pkg_config --atleast-version=$glib_req_ver gio-2.0; then
3640     gio=yes
3641     gio_cflags=$($pkg_config --cflags gio-2.0)
3642     gio_libs=$($pkg_config --libs gio-2.0)
3643 else
3644     gio=no
3645 fi
3646
3647 # Sanity check that the current size_t matches the
3648 # size that glib thinks it should be. This catches
3649 # problems on multi-arch where people try to build
3650 # 32-bit QEMU while pointing at 64-bit glib headers
3651 cat > $TMPC <<EOF
3652 #include <glib.h>
3653 #include <unistd.h>
3654
3655 #define QEMU_BUILD_BUG_ON(x) \
3656   typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
3657
3658 int main(void) {
3659    QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
3660    return 0;
3661 }
3662 EOF
3663
3664 if ! compile_prog "$CFLAGS" "$LIBS" ; then
3665     error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
3666                "You probably need to set PKG_CONFIG_LIBDIR"\
3667                "to point to the right pkg-config files for your"\
3668                "build target"
3669 fi
3670
3671 # Silence clang 3.5.0 warnings about glib attribute __alloc_size__ usage
3672 cat > $TMPC << EOF
3673 #include <glib.h>
3674 int main(void) { return 0; }
3675 EOF
3676 if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
3677     if cc_has_warning_flag "-Wno-unknown-attributes"; then
3678         glib_cflags="-Wno-unknown-attributes $glib_cflags"
3679         CFLAGS="-Wno-unknown-attributes $CFLAGS"
3680     fi
3681 fi
3682
3683 #########################################
3684 # zlib check
3685
3686 if test "$zlib" != "no" ; then
3687     if $pkg_config --exists zlib; then
3688         zlib_cflags=$($pkg_config --cflags zlib)
3689         zlib_libs=$($pkg_config --libs zlib)
3690         QEMU_CFLAGS="$zlib_cflags $QEMU_CFLAGS"
3691         LIBS="$zlib_libs $LIBS"
3692     else
3693         cat > $TMPC << EOF
3694 #include <zlib.h>
3695 int main(void) { zlibVersion(); return 0; }
3696 EOF
3697         if compile_prog "" "-lz" ; then
3698             LIBS="$LIBS -lz"
3699         else
3700             error_exit "zlib check failed" \
3701                 "Make sure to have the zlib libs and headers installed."
3702         fi
3703     fi
3704 fi
3705
3706 ##########################################
3707 # SHA command probe for modules
3708 if test "$modules" = yes; then
3709     shacmd_probe="sha1sum sha1 shasum"
3710     for c in $shacmd_probe; do
3711         if has $c; then
3712             shacmd="$c"
3713             break
3714         fi
3715     done
3716     if test "$shacmd" = ""; then
3717         error_exit "one of the checksum commands is required to enable modules: $shacmd_probe"
3718     fi
3719 fi
3720
3721 ##########################################
3722 # pixman support probe
3723
3724 if test "$want_tools" = "no" && test "$softmmu" = "no"; then
3725   pixman_cflags=
3726   pixman_libs=
3727 elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then
3728   pixman_cflags=$($pkg_config --cflags pixman-1)
3729   pixman_libs=$($pkg_config --libs pixman-1)
3730 else
3731   error_exit "pixman >= 0.21.8 not present." \
3732       "Please install the pixman devel package."
3733 fi
3734
3735 ##########################################
3736 # libmpathpersist probe
3737
3738 if test "$mpath" != "no" ; then
3739   # probe for the new API
3740   cat > $TMPC <<EOF
3741 #include <libudev.h>
3742 #include <mpath_persist.h>
3743 unsigned mpath_mx_alloc_len = 1024;
3744 int logsink;
3745 static struct config *multipath_conf;
3746 extern struct udev *udev;
3747 extern struct config *get_multipath_config(void);
3748 extern void put_multipath_config(struct config *conf);
3749 struct udev *udev;
3750 struct config *get_multipath_config(void) { return multipath_conf; }
3751 void put_multipath_config(struct config *conf) { }
3752
3753 int main(void) {
3754     udev = udev_new();
3755     multipath_conf = mpath_lib_init();
3756     return 0;
3757 }
3758 EOF
3759   if compile_prog "" "-ludev -lmultipath -lmpathpersist" ; then
3760     mpathpersist=yes
3761     mpathpersist_new_api=yes
3762   else
3763     # probe for the old API
3764     cat > $TMPC <<EOF
3765 #include <libudev.h>
3766 #include <mpath_persist.h>
3767 unsigned mpath_mx_alloc_len = 1024;
3768 int logsink;
3769 int main(void) {
3770     struct udev *udev = udev_new();
3771     mpath_lib_init(udev);
3772     return 0;
3773 }
3774 EOF
3775     if compile_prog "" "-ludev -lmultipath -lmpathpersist" ; then
3776       mpathpersist=yes
3777       mpathpersist_new_api=no
3778     else
3779       mpathpersist=no
3780     fi
3781   fi
3782 else
3783   mpathpersist=no
3784 fi
3785
3786 ##########################################
3787 # libcap probe
3788
3789 if test "$cap" != "no" ; then
3790   cat > $TMPC <<EOF
3791 #include <stdio.h>
3792 #include <sys/capability.h>
3793 int main(void) { cap_t caps; caps = cap_init(); return caps != NULL; }
3794 EOF
3795   if compile_prog "" "-lcap" ; then
3796     cap=yes
3797   else
3798     cap=no
3799   fi
3800 fi
3801
3802 ##########################################
3803 # pthread probe
3804 PTHREADLIBS_LIST="-pthread -lpthread -lpthreadGC2"
3805
3806 pthread=no
3807 cat > $TMPC << EOF
3808 #include <pthread.h>
3809 static void *f(void *p) { return NULL; }
3810 int main(void) {
3811   pthread_t thread;
3812   pthread_create(&thread, 0, f, 0);
3813   return 0;
3814 }
3815 EOF
3816 if compile_prog "" "" ; then
3817   pthread=yes
3818 else
3819   for pthread_lib in $PTHREADLIBS_LIST; do
3820     if compile_prog "" "$pthread_lib" ; then
3821       pthread=yes
3822       found=no
3823       for lib_entry in $LIBS; do
3824         if test "$lib_entry" = "$pthread_lib"; then
3825           found=yes
3826           break
3827         fi
3828       done
3829       if test "$found" = "no"; then
3830         LIBS="$pthread_lib $LIBS"
3831         libs_qga="$pthread_lib $libs_qga"
3832       fi
3833       PTHREAD_LIB="$pthread_lib"
3834       break
3835     fi
3836   done
3837 fi
3838
3839 if test "$mingw32" != yes && test "$pthread" = no; then
3840   error_exit "pthread check failed" \
3841       "Make sure to have the pthread libs and headers installed."
3842 fi
3843
3844 # check for pthread_setname_np with thread id
3845 pthread_setname_np_w_tid=no
3846 cat > $TMPC << EOF
3847 #include <pthread.h>
3848
3849 static void *f(void *p) { return NULL; }
3850 int main(void)
3851 {
3852     pthread_t thread;
3853     pthread_create(&thread, 0, f, 0);
3854     pthread_setname_np(thread, "QEMU");
3855     return 0;
3856 }
3857 EOF
3858 if compile_prog "" "$pthread_lib" ; then
3859   pthread_setname_np_w_tid=yes
3860 fi
3861
3862 # check for pthread_setname_np without thread id
3863 pthread_setname_np_wo_tid=no
3864 cat > $TMPC << EOF
3865 #include <pthread.h>
3866
3867 static void *f(void *p) { pthread_setname_np("QEMU"); }
3868 int main(void)
3869 {
3870     pthread_t thread;
3871     pthread_create(&thread, 0, f, 0);
3872     return 0;
3873 }
3874 EOF
3875 if compile_prog "" "$pthread_lib" ; then
3876   pthread_setname_np_wo_tid=yes
3877 fi
3878
3879 ##########################################
3880 # rbd probe
3881 if test "$rbd" != "no" ; then
3882   cat > $TMPC <<EOF
3883 #include <stdio.h>
3884 #include <rbd/librbd.h>
3885 int main(void) {
3886     rados_t cluster;
3887     rados_create(&cluster, NULL);
3888     return 0;
3889 }
3890 EOF
3891   rbd_libs="-lrbd -lrados"
3892   if compile_prog "" "$rbd_libs" ; then
3893     rbd=yes
3894   else
3895     if test "$rbd" = "yes" ; then
3896       feature_not_found "rados block device" "Install librbd/ceph devel"
3897     fi
3898     rbd=no
3899   fi
3900 fi
3901
3902 ##########################################
3903 # libssh probe
3904 if test "$libssh" != "no" ; then
3905   if $pkg_config --exists libssh; then
3906     libssh_cflags=$($pkg_config libssh --cflags)
3907     libssh_libs=$($pkg_config libssh --libs)
3908     libssh=yes
3909   else
3910     if test "$libssh" = "yes" ; then
3911       error_exit "libssh required for --enable-libssh"
3912     fi
3913     libssh=no
3914   fi
3915 fi
3916
3917 ##########################################
3918 # Check for libssh 0.8
3919 # This is done like this instead of using the LIBSSH_VERSION_* and
3920 # SSH_VERSION_* macros because some distributions in the past shipped
3921 # snapshots of the future 0.8 from Git, and those snapshots did not
3922 # have updated version numbers (still referring to 0.7.0).
3923
3924 if test "$libssh" = "yes"; then
3925   cat > $TMPC <<EOF
3926 #include <libssh/libssh.h>
3927 int main(void) { return ssh_get_server_publickey(NULL, NULL); }
3928 EOF
3929   if compile_prog "$libssh_cflags" "$libssh_libs"; then
3930     libssh_cflags="-DHAVE_LIBSSH_0_8 $libssh_cflags"
3931   fi
3932 fi
3933
3934 ##########################################
3935 # linux-aio probe
3936
3937 if test "$linux_aio" != "no" ; then
3938   cat > $TMPC <<EOF
3939 #include <libaio.h>
3940 #include <sys/eventfd.h>
3941 #include <stddef.h>
3942 int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; }
3943 EOF
3944   if compile_prog "" "-laio" ; then
3945     linux_aio=yes
3946   else
3947     if test "$linux_aio" = "yes" ; then
3948       feature_not_found "linux AIO" "Install libaio devel"
3949     fi
3950     linux_aio=no
3951   fi
3952 fi
3953
3954 ##########################################
3955 # TPM emulation is only on POSIX
3956
3957 if test "$tpm" = ""; then
3958   if test "$mingw32" = "yes"; then
3959     tpm=no
3960   else
3961     tpm=yes
3962   fi
3963 elif test "$tpm" = "yes"; then
3964   if test "$mingw32" = "yes" ; then
3965     error_exit "TPM emulation only available on POSIX systems"
3966   fi
3967 fi
3968
3969 ##########################################
3970 # attr probe
3971
3972 if test "$attr" != "no" ; then
3973   cat > $TMPC <<EOF
3974 #include <stdio.h>
3975 #include <sys/types.h>
3976 #ifdef CONFIG_LIBATTR
3977 #include <attr/xattr.h>
3978 #else
3979 #include <sys/xattr.h>
3980 #endif
3981 int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; }
3982 EOF
3983   if compile_prog "" "" ; then
3984     attr=yes
3985   # Older distros have <attr/xattr.h>, and need -lattr:
3986   elif compile_prog "-DCONFIG_LIBATTR" "-lattr" ; then
3987     attr=yes
3988     LIBS="-lattr $LIBS"
3989     libattr=yes
3990   else
3991     if test "$attr" = "yes" ; then
3992       feature_not_found "ATTR" "Install libc6 or libattr devel"
3993     fi
3994     attr=no
3995   fi
3996 fi
3997
3998 ##########################################
3999 # iovec probe
4000 cat > $TMPC <<EOF
4001 #include <sys/types.h>
4002 #include <sys/uio.h>
4003 #include <unistd.h>
4004 int main(void) { return sizeof(struct iovec); }
4005 EOF
4006 iovec=no
4007 if compile_prog "" "" ; then
4008   iovec=yes
4009 fi
4010
4011 ##########################################
4012 # preadv probe
4013 cat > $TMPC <<EOF
4014 #include <sys/types.h>
4015 #include <sys/uio.h>
4016 #include <unistd.h>
4017 int main(void) { return preadv(0, 0, 0, 0); }
4018 EOF
4019 preadv=no
4020 if compile_prog "" "" ; then
4021   preadv=yes
4022 fi
4023
4024 ##########################################
4025 # fdt probe
4026 # fdt support is mandatory for at least some target architectures,
4027 # so insist on it if we're building those system emulators.
4028 fdt_required=no
4029 for target in $target_list; do
4030   case $target in
4031     aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu)
4032       fdt_required=yes
4033     ;;
4034   esac
4035 done
4036
4037 if test "$fdt_required" = "yes"; then
4038   if test "$fdt" = "no"; then
4039     error_exit "fdt disabled but some requested targets require it." \
4040       "You can turn off fdt only if you also disable all the system emulation" \
4041       "targets which need it (by specifying a cut down --target-list)."
4042   fi
4043   fdt=yes
4044 fi
4045
4046 if test "$fdt" != "no" ; then
4047   fdt_libs="-lfdt"
4048   # explicitly check for libfdt_env.h as it is missing in some stable installs
4049   # and test for required functions to make sure we are on a version >= 1.4.2
4050   cat > $TMPC << EOF
4051 #include <libfdt.h>
4052 #include <libfdt_env.h>
4053 int main(void) { fdt_check_full(NULL, 0); return 0; }
4054 EOF
4055   if compile_prog "" "$fdt_libs" ; then
4056     # system DTC is good - use it
4057     fdt=system
4058   else
4059       # have GIT checkout, so activate dtc submodule
4060       if test -e "${source_path}/.git" ; then
4061           git_submodules="${git_submodules} dtc"
4062       fi
4063       if test -d "${source_path}/dtc/libfdt" || test -e "${source_path}/.git" ; then
4064           fdt=git
4065           mkdir -p dtc
4066           if [ "$pwd_is_source_path" != "y" ] ; then
4067               symlink "$source_path/dtc/Makefile" "dtc/Makefile"
4068               symlink "$source_path/dtc/scripts" "dtc/scripts"
4069           fi
4070           fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt"
4071           fdt_ldflags="-L\$(BUILD_DIR)/dtc/libfdt"
4072           fdt_libs="$fdt_libs"
4073       elif test "$fdt" = "yes" ; then
4074           # Not a git build & no libfdt found, prompt for system install
4075           error_exit "DTC (libfdt) version >= 1.4.2 not present." \
4076                      "Please install the DTC (libfdt) devel package"
4077       else
4078           # don't have and don't want
4079           fdt_libs=
4080           fdt=no
4081       fi
4082   fi
4083 fi
4084
4085 libs_softmmu="$libs_softmmu $fdt_libs"
4086
4087 ##########################################
4088 # opengl probe (for sdl2, gtk, milkymist-tmu2)
4089
4090 gbm="no"
4091 if $pkg_config gbm; then
4092     gbm_cflags="$($pkg_config --cflags gbm)"
4093     gbm_libs="$($pkg_config --libs gbm)"
4094     gbm="yes"
4095 fi
4096
4097 if test "$opengl" != "no" ; then
4098   opengl_pkgs="epoxy gbm"
4099   if $pkg_config $opengl_pkgs; then
4100     opengl_cflags="$($pkg_config --cflags $opengl_pkgs)"
4101     opengl_libs="$($pkg_config --libs $opengl_pkgs)"
4102     opengl=yes
4103     if test "$gtk" = "yes" && $pkg_config --exists "$gtkpackage >= 3.16"; then
4104         gtk_gl="yes"
4105     fi
4106     QEMU_CFLAGS="$QEMU_CFLAGS $opengl_cflags"
4107   else
4108     if test "$opengl" = "yes" ; then
4109       feature_not_found "opengl" "Please install opengl (mesa) devel pkgs: $opengl_pkgs"
4110     fi
4111     opengl_cflags=""
4112     opengl_libs=""
4113     opengl=no
4114   fi
4115 fi
4116
4117 if test "$opengl" = "yes"; then
4118   cat > $TMPC << EOF
4119 #include <epoxy/egl.h>
4120 #ifndef EGL_MESA_image_dma_buf_export
4121 # error mesa/epoxy lacks support for dmabufs (mesa 10.6+)
4122 #endif
4123 int main(void) { return 0; }
4124 EOF
4125   if compile_prog "" "" ; then
4126     opengl_dmabuf=yes
4127   fi
4128 fi
4129
4130 if test "$opengl" = "yes" && test "$have_x11" = "yes"; then
4131   for target in $target_list; do
4132     case $target in
4133       lm32-softmmu) # milkymist-tmu2 requires X11 and OpenGL
4134         need_x11=yes
4135       ;;
4136     esac
4137   done
4138 fi
4139
4140 ##########################################
4141 # libxml2 probe
4142 if test "$libxml2" != "no" ; then
4143     if $pkg_config --exists libxml-2.0; then
4144         libxml2="yes"
4145         libxml2_cflags=$($pkg_config --cflags libxml-2.0)
4146         libxml2_libs=$($pkg_config --libs libxml-2.0)
4147     else
4148         if test "$libxml2" = "yes"; then
4149             feature_not_found "libxml2" "Install libxml2 devel"
4150         fi
4151         libxml2="no"
4152     fi
4153 fi
4154
4155 ##########################################
4156 # glusterfs probe
4157 if test "$glusterfs" != "no" ; then
4158   if $pkg_config --atleast-version=3 glusterfs-api; then
4159     glusterfs="yes"
4160     glusterfs_cflags=$($pkg_config --cflags glusterfs-api)
4161     glusterfs_libs=$($pkg_config --libs glusterfs-api)
4162     if $pkg_config --atleast-version=4 glusterfs-api; then
4163       glusterfs_xlator_opt="yes"
4164     fi
4165     if $pkg_config --atleast-version=5 glusterfs-api; then
4166       glusterfs_discard="yes"
4167     fi
4168     if $pkg_config --atleast-version=6 glusterfs-api; then
4169       glusterfs_fallocate="yes"
4170       glusterfs_zerofill="yes"
4171     fi
4172     cat > $TMPC << EOF
4173 #include <glusterfs/api/glfs.h>
4174
4175 int
4176 main(void)
4177 {
4178         /* new glfs_ftruncate() passes two additional args */
4179         return glfs_ftruncate(NULL, 0, NULL, NULL);
4180 }
4181 EOF
4182     if compile_prog "$glusterfs_cflags" "$glusterfs_libs" ; then
4183       glusterfs_ftruncate_has_stat="yes"
4184     fi
4185     cat > $TMPC << EOF
4186 #include <glusterfs/api/glfs.h>
4187
4188 /* new glfs_io_cbk() passes two additional glfs_stat structs */
4189 static void
4190 glusterfs_iocb(glfs_fd_t *fd, ssize_t ret, struct glfs_stat *prestat, struct glfs_stat *poststat, void *data)
4191 {}
4192
4193 int
4194 main(void)
4195 {
4196         glfs_io_cbk iocb = &glusterfs_iocb;
4197         iocb(NULL, 0 , NULL, NULL, NULL);
4198         return 0;
4199 }
4200 EOF
4201     if compile_prog "$glusterfs_cflags" "$glusterfs_libs" ; then
4202       glusterfs_iocb_has_stat="yes"
4203     fi
4204   else
4205     if test "$glusterfs" = "yes" ; then
4206       feature_not_found "GlusterFS backend support" \
4207           "Install glusterfs-api devel >= 3"
4208     fi
4209     glusterfs="no"
4210   fi
4211 fi
4212
4213 # Check for inotify functions when we are building linux-user
4214 # emulator.  This is done because older glibc versions don't
4215 # have syscall stubs for these implemented.  In that case we
4216 # don't provide them even if kernel supports them.
4217 #
4218 inotify=no
4219 cat > $TMPC << EOF
4220 #include <sys/inotify.h>
4221
4222 int
4223 main(void)
4224 {
4225         /* try to start inotify */
4226         return inotify_init();
4227 }
4228 EOF
4229 if compile_prog "" "" ; then
4230   inotify=yes
4231 fi
4232
4233 inotify1=no
4234 cat > $TMPC << EOF
4235 #include <sys/inotify.h>
4236
4237 int
4238 main(void)
4239 {
4240     /* try to start inotify */
4241     return inotify_init1(0);
4242 }
4243 EOF
4244 if compile_prog "" "" ; then
4245   inotify1=yes
4246 fi
4247
4248 # check if pipe2 is there
4249 pipe2=no
4250 cat > $TMPC << EOF
4251 #include <unistd.h>
4252 #include <fcntl.h>
4253
4254 int main(void)
4255 {
4256     int pipefd[2];
4257     return pipe2(pipefd, O_CLOEXEC);
4258 }
4259 EOF
4260 if compile_prog "" "" ; then
4261   pipe2=yes
4262 fi
4263
4264 # check if accept4 is there
4265 accept4=no
4266 cat > $TMPC << EOF
4267 #include <sys/socket.h>
4268 #include <stddef.h>
4269
4270 int main(void)
4271 {
4272     accept4(0, NULL, NULL, SOCK_CLOEXEC);
4273     return 0;
4274 }
4275 EOF
4276 if compile_prog "" "" ; then
4277   accept4=yes
4278 fi
4279
4280 # check if tee/splice is there. vmsplice was added same time.
4281 splice=no
4282 cat > $TMPC << EOF
4283 #include <unistd.h>
4284 #include <fcntl.h>
4285 #include <limits.h>
4286
4287 int main(void)
4288 {
4289     int len, fd = 0;
4290     len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
4291     splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
4292     return 0;
4293 }
4294 EOF
4295 if compile_prog "" "" ; then
4296   splice=yes
4297 fi
4298
4299 ##########################################
4300 # libnuma probe
4301
4302 if test "$numa" != "no" ; then
4303   cat > $TMPC << EOF
4304 #include <numa.h>
4305 int main(void) { return numa_available(); }
4306 EOF
4307
4308   if compile_prog "" "-lnuma" ; then
4309     numa=yes
4310     libs_softmmu="-lnuma $libs_softmmu"
4311   else
4312     if test "$numa" = "yes" ; then
4313       feature_not_found "numa" "install numactl devel"
4314     fi
4315     numa=no
4316   fi
4317 fi
4318
4319 if test "$tcmalloc" = "yes" && test "$jemalloc" = "yes" ; then
4320     echo "ERROR: tcmalloc && jemalloc can't be used at the same time"
4321     exit 1
4322 fi
4323
4324 # Even if malloc_trim() is available, these non-libc memory allocators
4325 # do not support it.
4326 if test "$tcmalloc" = "yes" || test "$jemalloc" = "yes" ; then
4327     if test "$malloc_trim" = "yes" ; then
4328         echo "Disabling malloc_trim with non-libc memory allocator"
4329     fi
4330     malloc_trim="no"
4331 fi
4332
4333 #######################################
4334 # malloc_trim
4335
4336 if test "$malloc_trim" != "no" ; then
4337     cat > $TMPC << EOF
4338 #include <malloc.h>
4339 int main(void) { malloc_trim(0); return 0; }
4340 EOF
4341     if compile_prog "" "" ; then
4342         malloc_trim="yes"
4343     else
4344         malloc_trim="no"
4345     fi
4346 fi
4347
4348 ##########################################
4349 # tcmalloc probe
4350
4351 if test "$tcmalloc" = "yes" ; then
4352   cat > $TMPC << EOF
4353 #include <stdlib.h>
4354 int main(void) { malloc(1); return 0; }
4355 EOF
4356
4357   if compile_prog "" "-ltcmalloc" ; then
4358     LIBS="-ltcmalloc $LIBS"
4359   else
4360     feature_not_found "tcmalloc" "install gperftools devel"
4361   fi
4362 fi
4363
4364 ##########################################
4365 # jemalloc probe
4366
4367 if test "$jemalloc" = "yes" ; then
4368   cat > $TMPC << EOF
4369 #include <stdlib.h>
4370 int main(void) { malloc(1); return 0; }
4371 EOF
4372
4373   if compile_prog "" "-ljemalloc" ; then
4374     LIBS="-ljemalloc $LIBS"
4375   else
4376     feature_not_found "jemalloc" "install jemalloc devel"
4377   fi
4378 fi
4379
4380 ##########################################
4381 # signalfd probe
4382 signalfd="no"
4383 cat > $TMPC << EOF
4384 #include <unistd.h>
4385 #include <sys/syscall.h>
4386 #include <signal.h>
4387 int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); }
4388 EOF
4389
4390 if compile_prog "" "" ; then
4391   signalfd=yes
4392 fi
4393
4394 # check if optreset global is declared by <getopt.h>
4395 optreset="no"
4396 cat > $TMPC << EOF
4397 #include <getopt.h>
4398 int main(void) { return optreset; }
4399 EOF
4400
4401 if compile_prog "" "" ; then
4402   optreset=yes
4403 fi
4404
4405 # check if eventfd is supported
4406 eventfd=no
4407 cat > $TMPC << EOF
4408 #include <sys/eventfd.h>
4409
4410 int main(void)
4411 {
4412     return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
4413 }
4414 EOF
4415 if compile_prog "" "" ; then
4416   eventfd=yes
4417 fi
4418
4419 # check if memfd is supported
4420 memfd=no
4421 cat > $TMPC << EOF
4422 #include <sys/mman.h>
4423
4424 int main(void)
4425 {
4426     return memfd_create("foo", MFD_ALLOW_SEALING);
4427 }
4428 EOF
4429 if compile_prog "" "" ; then
4430   memfd=yes
4431 fi
4432
4433 # check for usbfs
4434 have_usbfs=no
4435 if test "$linux_user" = "yes"; then
4436   cat > $TMPC << EOF
4437 #include <linux/usbdevice_fs.h>
4438
4439 #ifndef USBDEVFS_GET_CAPABILITIES
4440 #error "USBDEVFS_GET_CAPABILITIES undefined"
4441 #endif
4442
4443 #ifndef USBDEVFS_DISCONNECT_CLAIM
4444 #error "USBDEVFS_DISCONNECT_CLAIM undefined"
4445 #endif
4446
4447 int main(void)
4448 {
4449     return 0;
4450 }
4451 EOF
4452   if compile_prog "" ""; then
4453     have_usbfs=yes
4454   fi
4455 fi
4456
4457 # check for fallocate
4458 fallocate=no
4459 cat > $TMPC << EOF
4460 #include <fcntl.h>
4461
4462 int main(void)
4463 {
4464     fallocate(0, 0, 0, 0);
4465     return 0;
4466 }
4467 EOF
4468 if compile_prog "" "" ; then
4469   fallocate=yes
4470 fi
4471
4472 # check for fallocate hole punching
4473 fallocate_punch_hole=no
4474 cat > $TMPC << EOF
4475 #include <fcntl.h>
4476 #include <linux/falloc.h>
4477
4478 int main(void)
4479 {
4480     fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0);
4481     return 0;
4482 }
4483 EOF
4484 if compile_prog "" "" ; then
4485   fallocate_punch_hole=yes
4486 fi
4487
4488 # check that fallocate supports range zeroing inside the file
4489 fallocate_zero_range=no
4490 cat > $TMPC << EOF
4491 #include <fcntl.h>
4492 #include <linux/falloc.h>
4493
4494 int main(void)
4495 {
4496     fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0);
4497     return 0;
4498 }
4499 EOF
4500 if compile_prog "" "" ; then
4501   fallocate_zero_range=yes
4502 fi
4503
4504 # check for posix_fallocate
4505 posix_fallocate=no
4506 cat > $TMPC << EOF
4507 #include <fcntl.h>
4508
4509 int main(void)
4510 {
4511     posix_fallocate(0, 0, 0);
4512     return 0;
4513 }
4514 EOF
4515 if compile_prog "" "" ; then
4516     posix_fallocate=yes
4517 fi
4518
4519 # check for sync_file_range
4520 sync_file_range=no
4521 cat > $TMPC << EOF
4522 #include <fcntl.h>
4523
4524 int main(void)
4525 {
4526     sync_file_range(0, 0, 0, 0);
4527     return 0;
4528 }
4529 EOF
4530 if compile_prog "" "" ; then
4531   sync_file_range=yes
4532 fi
4533
4534 # check for linux/fiemap.h and FS_IOC_FIEMAP
4535 fiemap=no
4536 cat > $TMPC << EOF
4537 #include <sys/ioctl.h>
4538 #include <linux/fs.h>
4539 #include <linux/fiemap.h>
4540
4541 int main(void)
4542 {
4543     ioctl(0, FS_IOC_FIEMAP, 0);
4544     return 0;
4545 }
4546 EOF
4547 if compile_prog "" "" ; then
4548   fiemap=yes
4549 fi
4550
4551 # check for dup3
4552 dup3=no
4553 cat > $TMPC << EOF
4554 #include <unistd.h>
4555
4556 int main(void)
4557 {
4558     dup3(0, 0, 0);
4559     return 0;
4560 }
4561 EOF
4562 if compile_prog "" "" ; then
4563   dup3=yes
4564 fi
4565
4566 # check for ppoll support
4567 ppoll=no
4568 cat > $TMPC << EOF
4569 #include <poll.h>
4570
4571 int main(void)
4572 {
4573     struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 };
4574     ppoll(&pfd, 1, 0, 0);
4575     return 0;
4576 }
4577 EOF
4578 if compile_prog "" "" ; then
4579   ppoll=yes
4580 fi
4581
4582 # check for prctl(PR_SET_TIMERSLACK , ... ) support
4583 prctl_pr_set_timerslack=no
4584 cat > $TMPC << EOF
4585 #include <sys/prctl.h>
4586
4587 int main(void)
4588 {
4589     prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0);
4590     return 0;
4591 }
4592 EOF
4593 if compile_prog "" "" ; then
4594   prctl_pr_set_timerslack=yes
4595 fi
4596
4597 # check for epoll support
4598 epoll=no
4599 cat > $TMPC << EOF
4600 #include <sys/epoll.h>
4601
4602 int main(void)
4603 {
4604     epoll_create(0);
4605     return 0;
4606 }
4607 EOF
4608 if compile_prog "" "" ; then
4609   epoll=yes
4610 fi
4611
4612 # epoll_create1 is a later addition
4613 # so we must check separately for its presence
4614 epoll_create1=no
4615 cat > $TMPC << EOF
4616 #include <sys/epoll.h>
4617
4618 int main(void)
4619 {
4620     /* Note that we use epoll_create1 as a value, not as
4621      * a function being called. This is necessary so that on
4622      * old SPARC glibc versions where the function was present in
4623      * the library but not declared in the header file we will
4624      * fail the configure check. (Otherwise we will get a compiler
4625      * warning but not an error, and will proceed to fail the
4626      * qemu compile where we compile with -Werror.)
4627      */
4628     return (int)(uintptr_t)&epoll_create1;
4629 }
4630 EOF
4631 if compile_prog "" "" ; then
4632   epoll_create1=yes
4633 fi
4634
4635 # check for sendfile support
4636 sendfile=no
4637 cat > $TMPC << EOF
4638 #include <sys/sendfile.h>
4639
4640 int main(void)
4641 {
4642     return sendfile(0, 0, 0, 0);
4643 }
4644 EOF
4645 if compile_prog "" "" ; then
4646   sendfile=yes
4647 fi
4648
4649 # check for timerfd support (glibc 2.8 and newer)
4650 timerfd=no
4651 cat > $TMPC << EOF
4652 #include <sys/timerfd.h>
4653
4654 int main(void)
4655 {
4656     return(timerfd_create(CLOCK_REALTIME, 0));
4657 }
4658 EOF
4659 if compile_prog "" "" ; then
4660   timerfd=yes
4661 fi
4662
4663 # check for setns and unshare support
4664 setns=no
4665 cat > $TMPC << EOF
4666 #include <sched.h>
4667
4668 int main(void)
4669 {
4670     int ret;
4671     ret = setns(0, 0);
4672     ret = unshare(0);
4673     return ret;
4674 }
4675 EOF
4676 if compile_prog "" "" ; then
4677   setns=yes
4678 fi
4679
4680 # clock_adjtime probe
4681 clock_adjtime=no
4682 cat > $TMPC <<EOF
4683 #include <time.h>
4684
4685 int main(void)
4686 {
4687     return clock_adjtime(0, 0);
4688 }
4689 EOF
4690 clock_adjtime=no
4691 if compile_prog "" "" ; then
4692   clock_adjtime=yes
4693 fi
4694
4695 # syncfs probe
4696 syncfs=no
4697 cat > $TMPC <<EOF
4698 #include <unistd.h>
4699
4700 int main(void)
4701 {
4702     return syncfs(0);
4703 }
4704 EOF
4705 syncfs=no
4706 if compile_prog "" "" ; then
4707   syncfs=yes
4708 fi
4709
4710 # Check we have a new enough version of sphinx-build
4711 has_sphinx_build() {
4712     # This is a bit awkward but works: create a trivial document and
4713     # try to run it with our configuration file (which enforces a
4714     # version requirement). This will fail if either
4715     # sphinx-build doesn't exist at all or if it is too old.
4716     mkdir -p "$TMPDIR1/sphinx"
4717     touch "$TMPDIR1/sphinx/index.rst"
4718     sphinx-build -c "$source_path/docs" -b html "$TMPDIR1/sphinx" "$TMPDIR1/sphinx/out" >/dev/null 2>&1
4719 }
4720
4721 # Check if tools are available to build documentation.
4722 if test "$docs" != "no" ; then
4723   if has makeinfo && has pod2man && has_sphinx_build; then
4724     docs=yes
4725   else
4726     if test "$docs" = "yes" ; then
4727       feature_not_found "docs" "Install texinfo, Perl/perl-podlators and python-sphinx"
4728     fi
4729     docs=no
4730   fi
4731 fi
4732
4733 # Search for bswap_32 function
4734 byteswap_h=no
4735 cat > $TMPC << EOF
4736 #include <byteswap.h>
4737 int main(void) { return bswap_32(0); }
4738 EOF
4739 if compile_prog "" "" ; then
4740   byteswap_h=yes
4741 fi
4742
4743 # Search for bswap32 function
4744 bswap_h=no
4745 cat > $TMPC << EOF
4746 #include <sys/endian.h>
4747 #include <sys/types.h>
4748 #include <machine/bswap.h>
4749 int main(void) { return bswap32(0); }
4750 EOF
4751 if compile_prog "" "" ; then
4752   bswap_h=yes
4753 fi
4754
4755 ##########################################
4756 # Do we have libiscsi >= 1.9.0
4757 if test "$libiscsi" != "no" ; then
4758   if $pkg_config --atleast-version=1.9.0 libiscsi; then
4759     libiscsi="yes"
4760     libiscsi_cflags=$($pkg_config --cflags libiscsi)
4761     libiscsi_libs=$($pkg_config --libs libiscsi)
4762   else
4763     if test "$libiscsi" = "yes" ; then
4764       feature_not_found "libiscsi" "Install libiscsi >= 1.9.0"
4765     fi
4766     libiscsi="no"
4767   fi
4768 fi
4769
4770 ##########################################
4771 # Do we need libm
4772 cat > $TMPC << EOF
4773 #include <math.h>
4774 int main(int argc, char **argv) { return isnan(sin((double)argc)); }
4775 EOF
4776 if compile_prog "" "" ; then
4777   :
4778 elif compile_prog "" "-lm" ; then
4779   LIBS="-lm $LIBS"
4780   libs_qga="-lm $libs_qga"
4781 else
4782   error_exit "libm check failed"
4783 fi
4784
4785 ##########################################
4786 # Do we need librt
4787 # uClibc provides 2 versions of clock_gettime(), one with realtime
4788 # support and one without. This means that the clock_gettime() don't
4789 # need -lrt. We still need it for timer_create() so we check for this
4790 # function in addition.
4791 cat > $TMPC <<EOF
4792 #include <signal.h>
4793 #include <time.h>
4794 int main(void) {
4795   timer_create(CLOCK_REALTIME, NULL, NULL);
4796   return clock_gettime(CLOCK_REALTIME, NULL);
4797 }
4798 EOF
4799
4800 if compile_prog "" "" ; then
4801   :
4802 # we need pthread for static linking. use previous pthread test result
4803 elif compile_prog "" "$pthread_lib -lrt" ; then
4804   LIBS="$LIBS -lrt"
4805   libs_qga="$libs_qga -lrt"
4806 fi
4807
4808 # Check whether we need to link libutil for openpty()
4809 cat > $TMPC << EOF
4810 extern int openpty(int *am, int *as, char *name, void *termp, void *winp);
4811 int main(void) { return openpty(0, 0, 0, 0, 0); }
4812 EOF
4813
4814 if ! compile_prog "" "" ; then
4815   if compile_prog "" "-lutil" ; then
4816     libs_softmmu="-lutil $libs_softmmu"
4817     libs_tools="-lutil $libs_tools"
4818   fi
4819 fi
4820
4821 ##########################################
4822 # spice probe
4823 if test "$spice" != "no" ; then
4824   cat > $TMPC << EOF
4825 #include <spice.h>
4826 int main(void) { spice_server_new(); return 0; }
4827 EOF
4828   spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null)
4829   spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null)
4830   if $pkg_config --atleast-version=0.12.5 spice-server && \
4831      $pkg_config --atleast-version=0.12.3 spice-protocol && \
4832      compile_prog "$spice_cflags" "$spice_libs" ; then
4833     spice="yes"
4834     libs_softmmu="$libs_softmmu $spice_libs"
4835     QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags"
4836     spice_protocol_version=$($pkg_config --modversion spice-protocol)
4837     spice_server_version=$($pkg_config --modversion spice-server)
4838   else
4839     if test "$spice" = "yes" ; then
4840       feature_not_found "spice" \
4841           "Install spice-server(>=0.12.5) and spice-protocol(>=0.12.3) devel"
4842     fi
4843     spice="no"
4844   fi
4845 fi
4846
4847 # check for smartcard support
4848 if test "$smartcard" != "no"; then
4849     if $pkg_config --atleast-version=2.5.1 libcacard; then
4850         libcacard_cflags=$($pkg_config --cflags libcacard)
4851         libcacard_libs=$($pkg_config --libs libcacard)
4852         smartcard="yes"
4853     else
4854         if test "$smartcard" = "yes"; then
4855             feature_not_found "smartcard" "Install libcacard devel"
4856         fi
4857         smartcard="no"
4858     fi
4859 fi
4860
4861 # check for libusb
4862 if test "$libusb" != "no" ; then
4863     if $pkg_config --atleast-version=1.0.13 libusb-1.0; then
4864         libusb="yes"
4865         libusb_cflags=$($pkg_config --cflags libusb-1.0)
4866         libusb_libs=$($pkg_config --libs libusb-1.0)
4867     else
4868         if test "$libusb" = "yes"; then
4869             feature_not_found "libusb" "Install libusb devel >= 1.0.13"
4870         fi
4871         libusb="no"
4872     fi
4873 fi
4874
4875 # check for usbredirparser for usb network redirection support
4876 if test "$usb_redir" != "no" ; then
4877     if $pkg_config --atleast-version=0.6 libusbredirparser-0.5; then
4878         usb_redir="yes"
4879         usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5)
4880         usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5)
4881     else
4882         if test "$usb_redir" = "yes"; then
4883             feature_not_found "usb-redir" "Install usbredir devel"
4884         fi
4885         usb_redir="no"
4886     fi
4887 fi
4888
4889 ##########################################
4890 # check if we have VSS SDK headers for win
4891
4892 if test "$mingw32" = "yes" && test "$guest_agent" != "no" && \
4893         test "$vss_win32_sdk" != "no" ; then
4894   case "$vss_win32_sdk" in
4895     "")   vss_win32_include="-isystem $source_path" ;;
4896     *\ *) # The SDK is installed in "Program Files" by default, but we cannot
4897           # handle path with spaces. So we symlink the headers into ".sdk/vss".
4898           vss_win32_include="-isystem $source_path/.sdk/vss"
4899           symlink "$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
4900           ;;
4901     *)    vss_win32_include="-isystem $vss_win32_sdk"
4902   esac
4903   cat > $TMPC << EOF
4904 #define __MIDL_user_allocate_free_DEFINED__
4905 #include <inc/win2003/vss.h>
4906 int main(void) { return VSS_CTX_BACKUP; }
4907 EOF
4908   if compile_prog "$vss_win32_include" "" ; then
4909     guest_agent_with_vss="yes"
4910     QEMU_CFLAGS="$QEMU_CFLAGS $vss_win32_include"
4911     libs_qga="-lole32 -loleaut32 -lshlwapi -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
4912     qga_vss_provider="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb"
4913   else
4914     if test "$vss_win32_sdk" != "" ; then
4915       echo "ERROR: Please download and install Microsoft VSS SDK:"
4916       echo "ERROR:   http://www.microsoft.com/en-us/download/details.aspx?id=23490"
4917       echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
4918       echo "ERROR:   scripts/extract-vsssdk-headers setup.exe"
4919       echo "ERROR: The headers are extracted in the directory \`inc'."
4920       feature_not_found "VSS support"
4921     fi
4922     guest_agent_with_vss="no"
4923   fi
4924 fi
4925
4926 ##########################################
4927 # lookup Windows platform SDK (if not specified)
4928 # The SDK is needed only to build .tlb (type library) file of guest agent
4929 # VSS provider from the source. It is usually unnecessary because the
4930 # pre-compiled .tlb file is included.
4931
4932 if test "$mingw32" = "yes" && test "$guest_agent" != "no" && \
4933         test "$guest_agent_with_vss" = "yes" ; then
4934   if test -z "$win_sdk"; then
4935     programfiles="$PROGRAMFILES"
4936     test -n "$PROGRAMW6432" && programfiles="$PROGRAMW6432"
4937     if test -n "$programfiles"; then
4938       win_sdk=$(ls -d "$programfiles/Microsoft SDKs/Windows/v"* | tail -1) 2>/dev/null
4939     else
4940       feature_not_found "Windows SDK"
4941     fi
4942   elif test "$win_sdk" = "no"; then
4943     win_sdk=""
4944   fi
4945 fi
4946
4947 ##########################################
4948 # check if mingw environment provides a recent ntddscsi.h
4949 if test "$mingw32" = "yes" && test "$guest_agent" != "no"; then
4950   cat > $TMPC << EOF
4951 #include <windows.h>
4952 #include <ntddscsi.h>
4953 int main(void) {
4954 #if !defined(IOCTL_SCSI_GET_ADDRESS)
4955 #error Missing required ioctl definitions
4956 #endif
4957   SCSI_ADDRESS addr = { .Lun = 0, .TargetId = 0, .PathId = 0 };
4958   return addr.Lun;
4959 }
4960 EOF
4961   if compile_prog "" "" ; then
4962     guest_agent_ntddscsi=yes
4963     libs_qga="-lsetupapi -lcfgmgr32 $libs_qga"
4964   fi
4965 fi
4966
4967 ##########################################
4968 # virgl renderer probe
4969
4970 if test "$virglrenderer" != "no" ; then
4971   cat > $TMPC << EOF
4972 #include <virglrenderer.h>
4973 int main(void) { virgl_renderer_poll(); return 0; }
4974 EOF
4975   virgl_cflags=$($pkg_config --cflags virglrenderer 2>/dev/null)
4976   virgl_libs=$($pkg_config --libs virglrenderer 2>/dev/null)
4977   virgl_version=$($pkg_config --modversion virglrenderer 2>/dev/null)
4978   if $pkg_config virglrenderer >/dev/null 2>&1 && \
4979      compile_prog "$virgl_cflags" "$virgl_libs" ; then
4980     virglrenderer="yes"
4981   else
4982     if test "$virglrenderer" = "yes" ; then
4983       feature_not_found "virglrenderer"
4984     fi
4985     virglrenderer="no"
4986   fi
4987 fi
4988
4989 ##########################################
4990 # capstone
4991
4992 case "$capstone" in
4993   "" | yes)
4994     if $pkg_config capstone; then
4995       capstone=system
4996     elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
4997       capstone=git
4998     elif test -e "${source_path}/capstone/Makefile" ; then
4999       capstone=internal
5000     elif test -z "$capstone" ; then
5001       capstone=no
5002     else
5003       feature_not_found "capstone" "Install capstone devel or git submodule"
5004     fi
5005     ;;
5006
5007   system)
5008     if ! $pkg_config capstone; then
5009       feature_not_found "capstone" "Install capstone devel"
5010     fi
5011     ;;
5012 esac
5013
5014 case "$capstone" in
5015   git | internal)
5016     if test "$capstone" = git; then
5017       git_submodules="${git_submodules} capstone"
5018     fi
5019     mkdir -p capstone
5020     QEMU_CFLAGS="$QEMU_CFLAGS -I\$(SRC_PATH)/capstone/include"
5021     if test "$mingw32" = "yes"; then
5022       LIBCAPSTONE=capstone.lib
5023     else
5024       LIBCAPSTONE=libcapstone.a
5025     fi
5026     libs_cpu="-L\$(BUILD_DIR)/capstone -lcapstone $libs_cpu"
5027     ;;
5028
5029   system)
5030     QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags capstone)"
5031     libs_cpu="$($pkg_config --libs capstone) $libs_cpu"
5032     ;;
5033
5034   no)
5035     ;;
5036   *)
5037     error_exit "Unknown state for capstone: $capstone"
5038     ;;
5039 esac
5040
5041 ##########################################
5042 # check if we have fdatasync
5043
5044 fdatasync=no
5045 cat > $TMPC << EOF
5046 #include <unistd.h>
5047 int main(void) {
5048 #if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0
5049 return fdatasync(0);
5050 #else
5051 #error Not supported
5052 #endif
5053 }
5054 EOF
5055 if compile_prog "" "" ; then
5056     fdatasync=yes
5057 fi
5058
5059 ##########################################
5060 # check if we have madvise
5061
5062 madvise=no
5063 cat > $TMPC << EOF
5064 #include <sys/types.h>
5065 #include <sys/mman.h>
5066 #include <stddef.h>
5067 int main(void) { return madvise(NULL, 0, MADV_DONTNEED); }
5068 EOF
5069 if compile_prog "" "" ; then
5070     madvise=yes
5071 fi
5072
5073 ##########################################
5074 # check if we have posix_madvise
5075
5076 posix_madvise=no
5077 cat > $TMPC << EOF
5078 #include <sys/mman.h>
5079 #include <stddef.h>
5080 int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); }
5081 EOF
5082 if compile_prog "" "" ; then
5083     posix_madvise=yes
5084 fi
5085
5086 ##########################################
5087 # check if we have posix_memalign()
5088
5089 posix_memalign=no
5090 cat > $TMPC << EOF
5091 #include <stdlib.h>
5092 int main(void) {
5093     void *p;
5094     return posix_memalign(&p, 8, 8);
5095 }
5096 EOF
5097 if compile_prog "" "" ; then
5098     posix_memalign=yes
5099 fi
5100
5101 ##########################################
5102 # check if we have posix_syslog
5103
5104 posix_syslog=no
5105 cat > $TMPC << EOF
5106 #include <syslog.h>
5107 int main(void) { openlog("qemu", LOG_PID, LOG_DAEMON); syslog(LOG_INFO, "configure"); return 0; }
5108 EOF
5109 if compile_prog "" "" ; then
5110     posix_syslog=yes
5111 fi
5112
5113 ##########################################
5114 # check if we have sem_timedwait
5115
5116 sem_timedwait=no
5117 cat > $TMPC << EOF
5118 #include <semaphore.h>
5119 int main(void) { sem_t s; struct timespec t = {0}; return sem_timedwait(&s, &t); }
5120 EOF
5121 if compile_prog "" "" ; then
5122     sem_timedwait=yes
5123 fi
5124
5125 ##########################################
5126 # check if we have strchrnul
5127
5128 strchrnul=no
5129 cat > $TMPC << EOF
5130 #include <string.h>
5131 int main(void);
5132 // Use a haystack that the compiler shouldn't be able to constant fold
5133 char *haystack = (char*)&main;
5134 int main(void) { return strchrnul(haystack, 'x') != &haystack[6]; }
5135 EOF
5136 if compile_prog "" "" ; then
5137     strchrnul=yes
5138 fi
5139
5140 ##########################################
5141 # check if trace backend exists
5142
5143 $python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends  > /dev/null 2> /dev/null
5144 if test "$?" -ne 0 ; then
5145   error_exit "invalid trace backends" \
5146       "Please choose supported trace backends."
5147 fi
5148
5149 ##########################################
5150 # For 'ust' backend, test if ust headers are present
5151 if have_backend "ust"; then
5152   cat > $TMPC << EOF
5153 #include <lttng/tracepoint.h>
5154 int main(void) { return 0; }
5155 EOF
5156   if compile_prog "" "-Wl,--no-as-needed -ldl" ; then
5157     if $pkg_config lttng-ust --exists; then
5158       lttng_ust_libs=$($pkg_config --libs lttng-ust)
5159     else
5160       lttng_ust_libs="-llttng-ust -ldl"
5161     fi
5162     if $pkg_config liburcu-bp --exists; then
5163       urcu_bp_libs=$($pkg_config --libs liburcu-bp)
5164     else
5165       urcu_bp_libs="-lurcu-bp"
5166     fi
5167
5168     LIBS="$lttng_ust_libs $urcu_bp_libs $LIBS"
5169     libs_qga="$lttng_ust_libs $urcu_bp_libs $libs_qga"
5170   else
5171     error_exit "Trace backend 'ust' missing lttng-ust header files"
5172   fi
5173 fi
5174
5175 ##########################################
5176 # For 'dtrace' backend, test if 'dtrace' command is present
5177 if have_backend "dtrace"; then
5178   if ! has 'dtrace' ; then
5179     error_exit "dtrace command is not found in PATH $PATH"
5180   fi
5181   trace_backend_stap="no"
5182   if has 'stap' ; then
5183     trace_backend_stap="yes"
5184   fi
5185 fi
5186
5187 ##########################################
5188 # check and set a backend for coroutine
5189
5190 # We prefer ucontext, but it's not always possible. The fallback
5191 # is sigcontext. On Windows the only valid backend is the Windows
5192 # specific one.
5193
5194 ucontext_works=no
5195 if test "$darwin" != "yes"; then
5196   cat > $TMPC << EOF
5197 #include <ucontext.h>
5198 #ifdef __stub_makecontext
5199 #error Ignoring glibc stub makecontext which will always fail
5200 #endif
5201 int main(void) { makecontext(0, 0, 0); return 0; }
5202 EOF
5203   if compile_prog "" "" ; then
5204     ucontext_works=yes
5205   fi
5206 fi
5207
5208 if test "$coroutine" = ""; then
5209   if test "$mingw32" = "yes"; then
5210     coroutine=win32
5211   elif test "$ucontext_works" = "yes"; then
5212     coroutine=ucontext
5213   else
5214     coroutine=sigaltstack
5215   fi
5216 else
5217   case $coroutine in
5218   windows)
5219     if test "$mingw32" != "yes"; then
5220       error_exit "'windows' coroutine backend only valid for Windows"
5221     fi
5222     # Unfortunately the user visible backend name doesn't match the
5223     # coroutine-*.c filename for this case, so we have to adjust it here.
5224     coroutine=win32
5225     ;;
5226   ucontext)
5227     if test "$ucontext_works" != "yes"; then
5228       feature_not_found "ucontext"
5229     fi
5230     ;;
5231   sigaltstack)
5232     if test "$mingw32" = "yes"; then
5233       error_exit "only the 'windows' coroutine backend is valid for Windows"
5234     fi
5235     ;;
5236   *)
5237     error_exit "unknown coroutine backend $coroutine"
5238     ;;
5239   esac
5240 fi
5241
5242 if test "$coroutine_pool" = ""; then
5243   coroutine_pool=yes
5244 fi
5245
5246 if test "$debug_stack_usage" = "yes"; then
5247   if test "$coroutine_pool" = "yes"; then
5248     echo "WARN: disabling coroutine pool for stack usage debugging"
5249     coroutine_pool=no
5250   fi
5251 fi
5252
5253
5254 ##########################################
5255 # check if we have open_by_handle_at
5256
5257 open_by_handle_at=no
5258 cat > $TMPC << EOF
5259 #include <fcntl.h>
5260 #if !defined(AT_EMPTY_PATH)
5261 # error missing definition
5262 #else
5263 int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
5264 #endif
5265 EOF
5266 if compile_prog "" "" ; then
5267     open_by_handle_at=yes
5268 fi
5269
5270 ########################################
5271 # check if we have linux/magic.h
5272
5273 linux_magic_h=no
5274 cat > $TMPC << EOF
5275 #include <linux/magic.h>
5276 int main(void) {
5277   return 0;
5278 }
5279 EOF
5280 if compile_prog "" "" ; then
5281     linux_magic_h=yes
5282 fi
5283
5284 ########################################
5285 # check whether we can disable warning option with a pragma (this is needed
5286 # to silence warnings in the headers of some versions of external libraries).
5287 # This test has to be compiled with -Werror as otherwise an unknown pragma is
5288 # only a warning.
5289 #
5290 # If we can't selectively disable warning in the code, disable -Werror so that
5291 # the build doesn't fail anyway.
5292
5293 pragma_disable_unused_but_set=no
5294 cat > $TMPC << EOF
5295 #pragma GCC diagnostic push
5296 #pragma GCC diagnostic ignored "-Wstrict-prototypes"
5297 #pragma GCC diagnostic pop
5298
5299 int main(void) {
5300     return 0;
5301 }
5302 EOF
5303 if compile_prog "-Werror" "" ; then
5304     pragma_diagnostic_available=yes
5305 else
5306     werror=no
5307 fi
5308
5309 ########################################
5310 # check if we have valgrind/valgrind.h
5311
5312 valgrind_h=no
5313 cat > $TMPC << EOF
5314 #include <valgrind/valgrind.h>
5315 int main(void) {
5316   return 0;
5317 }
5318 EOF
5319 if compile_prog "" "" ; then
5320     valgrind_h=yes
5321 fi
5322
5323 ########################################
5324 # check if environ is declared
5325
5326 has_environ=no
5327 cat > $TMPC << EOF
5328 #include <unistd.h>
5329 int main(void) {
5330     environ = 0;
5331     return 0;
5332 }
5333 EOF
5334 if compile_prog "" "" ; then
5335     has_environ=yes
5336 fi
5337
5338 ########################################
5339 # check if cpuid.h is usable.
5340
5341 cat > $TMPC << EOF
5342 #include <cpuid.h>
5343 int main(void) {
5344     unsigned a, b, c, d;
5345     int max = __get_cpuid_max(0, 0);
5346
5347     if (max >= 1) {
5348         __cpuid(1, a, b, c, d);
5349     }
5350
5351     if (max >= 7) {
5352         __cpuid_count(7, 0, a, b, c, d);
5353     }
5354
5355     return 0;
5356 }
5357 EOF
5358 if compile_prog "" "" ; then
5359     cpuid_h=yes
5360 fi
5361
5362 ##########################################
5363 # avx2 optimization requirement check
5364 #
5365 # There is no point enabling this if cpuid.h is not usable,
5366 # since we won't be able to select the new routines.
5367
5368 if test "$cpuid_h" = "yes" && test "$avx2_opt" != "no"; then
5369   cat > $TMPC << EOF
5370 #pragma GCC push_options
5371 #pragma GCC target("avx2")
5372 #include <cpuid.h>
5373 #include <immintrin.h>
5374 static int bar(void *a) {
5375     __m256i x = *(__m256i *)a;
5376     return _mm256_testz_si256(x, x);
5377 }
5378 int main(int argc, char *argv[]) { return bar(argv[0]); }
5379 EOF
5380   if compile_object "" ; then
5381     avx2_opt="yes"
5382   else
5383     avx2_opt="no"
5384   fi
5385 fi
5386
5387 ########################################
5388 # check if __[u]int128_t is usable.
5389
5390 int128=no
5391 cat > $TMPC << EOF
5392 __int128_t a;
5393 __uint128_t b;
5394 int main (void) {
5395   a = a + b;
5396   b = a * b;
5397   a = a * a;
5398   return 0;
5399 }
5400 EOF
5401 if compile_prog "" "" ; then
5402     int128=yes
5403 fi
5404
5405 #########################################
5406 # See if 128-bit atomic operations are supported.
5407
5408 atomic128=no
5409 if test "$int128" = "yes"; then
5410   cat > $TMPC << EOF
5411 int main(void)
5412 {
5413   unsigned __int128 x = 0, y = 0;
5414   y = __atomic_load_16(&x, 0);
5415   __atomic_store_16(&x, y, 0);
5416   __atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
5417   return 0;
5418 }
5419 EOF
5420   if compile_prog "" "" ; then
5421     atomic128=yes
5422   fi
5423 fi
5424
5425 cmpxchg128=no
5426 if test "$int128" = yes && test "$atomic128" = no; then
5427   cat > $TMPC << EOF
5428 int main(void)
5429 {
5430   unsigned __int128 x = 0, y = 0;
5431   __sync_val_compare_and_swap_16(&x, y, x);
5432   return 0;
5433 }
5434 EOF
5435   if compile_prog "" "" ; then
5436     cmpxchg128=yes
5437   fi
5438 fi
5439
5440 #########################################
5441 # See if 64-bit atomic operations are supported.
5442 # Note that without __atomic builtins, we can only
5443 # assume atomic loads/stores max at pointer size.
5444
5445 cat > $TMPC << EOF
5446 #include <stdint.h>
5447 int main(void)
5448 {
5449   uint64_t x = 0, y = 0;
5450 #ifdef __ATOMIC_RELAXED
5451   y = __atomic_load_8(&x, 0);
5452   __atomic_store_8(&x, y, 0);
5453   __atomic_compare_exchange_8(&x, &y, x, 0, 0, 0);
5454   __atomic_exchange_8(&x, y, 0);
5455   __atomic_fetch_add_8(&x, y, 0);
5456 #else
5457   typedef char is_host64[sizeof(void *) >= sizeof(uint64_t) ? 1 : -1];
5458   __sync_lock_test_and_set(&x, y);
5459   __sync_val_compare_and_swap(&x, y, 0);
5460   __sync_fetch_and_add(&x, y);
5461 #endif
5462   return 0;
5463 }
5464 EOF
5465 if compile_prog "" "" ; then
5466   atomic64=yes
5467 fi
5468
5469 ########################################
5470 # See if 16-byte vector operations are supported.
5471 # Even without a vector unit the compiler may expand these.
5472 # There is a bug in old GCC for PPC that crashes here.
5473 # Unfortunately it's the system compiler for Centos 7.
5474
5475 cat > $TMPC << EOF
5476 typedef unsigned char U1 __attribute__((vector_size(16)));
5477 typedef unsigned short U2 __attribute__((vector_size(16)));
5478 typedef unsigned int U4 __attribute__((vector_size(16)));
5479 typedef unsigned long long U8 __attribute__((vector_size(16)));
5480 typedef signed char S1 __attribute__((vector_size(16)));
5481 typedef signed short S2 __attribute__((vector_size(16)));
5482 typedef signed int S4 __attribute__((vector_size(16)));
5483 typedef signed long long S8 __attribute__((vector_size(16)));
5484 static U1 a1, b1;
5485 static U2 a2, b2;
5486 static U4 a4, b4;
5487 static U8 a8, b8;
5488 static S1 c1;
5489 static S2 c2;
5490 static S4 c4;
5491 static S8 c8;
5492 static int i;
5493 void helper(void *d, void *a, int shift, int i);
5494 void helper(void *d, void *a, int shift, int i)
5495 {
5496   *(U1 *)(d + i) = *(U1 *)(a + i) << shift;
5497   *(U2 *)(d + i) = *(U2 *)(a + i) << shift;
5498   *(U4 *)(d + i) = *(U4 *)(a + i) << shift;
5499   *(U8 *)(d + i) = *(U8 *)(a + i) << shift;
5500 }
5501 int main(void)
5502 {
5503   a1 += b1; a2 += b2; a4 += b4; a8 += b8;
5504   a1 -= b1; a2 -= b2; a4 -= b4; a8 -= b8;
5505   a1 *= b1; a2 *= b2; a4 *= b4; a8 *= b8;
5506   a1 &= b1; a2 &= b2; a4 &= b4; a8 &= b8;
5507   a1 |= b1; a2 |= b2; a4 |= b4; a8 |= b8;
5508   a1 ^= b1; a2 ^= b2; a4 ^= b4; a8 ^= b8;
5509   a1 <<= i; a2 <<= i; a4 <<= i; a8 <<= i;
5510   a1 >>= i; a2 >>= i; a4 >>= i; a8 >>= i;
5511   c1 >>= i; c2 >>= i; c4 >>= i; c8 >>= i;
5512   return 0;
5513 }
5514 EOF
5515
5516 vector16=no
5517 if compile_prog "" "" ; then
5518   vector16=yes
5519 fi
5520
5521 ########################################
5522 # check if getauxval is available.
5523
5524 getauxval=no
5525 cat > $TMPC << EOF
5526 #include <sys/auxv.h>
5527 int main(void) {
5528   return getauxval(AT_HWCAP) == 0;
5529 }
5530 EOF
5531 if compile_prog "" "" ; then
5532     getauxval=yes
5533 fi
5534
5535 ########################################
5536 # check if ccache is interfering with
5537 # semantic analysis of macros
5538
5539 unset CCACHE_CPP2
5540 ccache_cpp2=no
5541 cat > $TMPC << EOF
5542 static const int Z = 1;
5543 #define fn() ({ Z; })
5544 #define TAUT(X) ((X) == Z)
5545 #define PAREN(X, Y) (X == Y)
5546 #define ID(X) (X)
5547 int main(int argc, char *argv[])
5548 {
5549     int x = 0, y = 0;
5550     x = ID(x);
5551     x = fn();
5552     fn();
5553     if (PAREN(x, y)) return 0;
5554     if (TAUT(Z)) return 0;
5555     return 0;
5556 }
5557 EOF
5558
5559 if ! compile_object "-Werror"; then
5560     ccache_cpp2=yes
5561 fi
5562
5563 #################################################
5564 # clang does not support glibc + FORTIFY_SOURCE.
5565
5566 if test "$fortify_source" != "no"; then
5567   if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then
5568     fortify_source="no";
5569   elif test -n "$cxx" && has $cxx &&
5570        echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then
5571     fortify_source="no";
5572   else
5573     fortify_source="yes"
5574   fi
5575 fi
5576
5577 ###############################################
5578 # Check if copy_file_range is provided by glibc
5579 have_copy_file_range=no
5580 cat > $TMPC << EOF
5581 #include <unistd.h>
5582 int main(void) {
5583   copy_file_range(0, NULL, 0, NULL, 0, 0);
5584   return 0;
5585 }
5586 EOF
5587 if compile_prog "" "" ; then
5588     have_copy_file_range=yes
5589 fi
5590
5591 ##########################################
5592 # check if struct fsxattr is available via linux/fs.h
5593
5594 have_fsxattr=no
5595 cat > $TMPC << EOF
5596 #include <linux/fs.h>
5597 struct fsxattr foo;
5598 int main(void) {
5599   return 0;
5600 }
5601 EOF
5602 if compile_prog "" "" ; then
5603     have_fsxattr=yes
5604 fi
5605
5606 ##########################################
5607 # check for usable membarrier system call
5608 if test "$membarrier" = "yes"; then
5609     have_membarrier=no
5610     if test "$mingw32" = "yes" ; then
5611         have_membarrier=yes
5612     elif test "$linux" = "yes" ; then
5613         cat > $TMPC << EOF
5614     #include <linux/membarrier.h>
5615     #include <sys/syscall.h>
5616     #include <unistd.h>
5617     #include <stdlib.h>
5618     int main(void) {
5619         syscall(__NR_membarrier, MEMBARRIER_CMD_QUERY, 0);
5620         syscall(__NR_membarrier, MEMBARRIER_CMD_SHARED, 0);
5621         exit(0);
5622     }
5623 EOF
5624         if compile_prog "" "" ; then
5625             have_membarrier=yes
5626         fi
5627     fi
5628     if test "$have_membarrier" = "no"; then
5629       feature_not_found "membarrier" "membarrier system call not available"
5630     fi
5631 else
5632     # Do not enable it by default even for Mingw32, because it doesn't
5633     # work on Wine.
5634     membarrier=no
5635 fi
5636
5637 ##########################################
5638 # check if rtnetlink.h exists and is useful
5639 have_rtnetlink=no
5640 cat > $TMPC << EOF
5641 #include <linux/rtnetlink.h>
5642 int main(void) {
5643   return IFLA_PROTO_DOWN;
5644 }
5645 EOF
5646 if compile_prog "" "" ; then
5647     have_rtnetlink=yes
5648 fi
5649
5650 ##########################################
5651 # check for usable AF_VSOCK environment
5652 have_af_vsock=no
5653 cat > $TMPC << EOF
5654 #include <errno.h>
5655 #include <sys/types.h>
5656 #include <sys/socket.h>
5657 #if !defined(AF_VSOCK)
5658 # error missing AF_VSOCK flag
5659 #endif
5660 #include <linux/vm_sockets.h>
5661 int main(void) {
5662     int sock, ret;
5663     struct sockaddr_vm svm;
5664     socklen_t len = sizeof(svm);
5665     sock = socket(AF_VSOCK, SOCK_STREAM, 0);
5666     ret = getpeername(sock, (struct sockaddr *)&svm, &len);
5667     if ((ret == -1) && (errno == ENOTCONN)) {
5668         return 0;
5669     }
5670     return -1;
5671 }
5672 EOF
5673 if compile_prog "" "" ; then
5674     have_af_vsock=yes
5675 fi
5676
5677 ##########################################
5678 # check for usable AF_ALG environment
5679 hava_afalg=no
5680 cat > $TMPC << EOF
5681 #include <errno.h>
5682 #include <sys/types.h>
5683 #include <sys/socket.h>
5684 #include <linux/if_alg.h>
5685 int main(void) {
5686     int sock;
5687     sock = socket(AF_ALG, SOCK_SEQPACKET, 0);
5688     return sock;
5689 }
5690 EOF
5691 if compile_prog "" "" ; then
5692     have_afalg=yes
5693 fi
5694 if test "$crypto_afalg" = "yes"
5695 then
5696     if test "$have_afalg" != "yes"
5697     then
5698         error_exit "AF_ALG requested but could not be detected"
5699     fi
5700 fi
5701
5702
5703 #################################################
5704 # Check to see if we have the Hypervisor framework
5705 if [ "$darwin" = "yes" ] ; then
5706   cat > $TMPC << EOF
5707 #include <Hypervisor/hv.h>
5708 int main() { return 0;}
5709 EOF
5710   if ! compile_object ""; then
5711     hvf='no'
5712   else
5713     hvf='yes'
5714     LDFLAGS="-framework Hypervisor $LDFLAGS"
5715   fi
5716 fi
5717
5718 #################################################
5719 # Sparc implicitly links with --relax, which is
5720 # incompatible with -r, so --no-relax should be
5721 # given. It does no harm to give it on other
5722 # platforms too.
5723
5724 # Note: the prototype is needed since QEMU_CFLAGS
5725 #       contains -Wmissing-prototypes
5726 cat > $TMPC << EOF
5727 extern int foo(void);
5728 int foo(void) { return 0; }
5729 EOF
5730 if ! compile_object ""; then
5731   error_exit "Failed to compile object file for LD_REL_FLAGS test"
5732 fi
5733 for i in '-Wl,-r -Wl,--no-relax' -Wl,-r -r; do
5734   if do_cc -nostdlib $i -o $TMPMO $TMPO; then
5735     LD_REL_FLAGS=$i
5736     break
5737   fi
5738 done
5739 if test "$modules" = "yes" && test "$LD_REL_FLAGS" = ""; then
5740   feature_not_found "modules" "Cannot find how to build relocatable objects"
5741 fi
5742
5743 ##########################################
5744 # check for sysmacros.h
5745
5746 have_sysmacros=no
5747 cat > $TMPC << EOF
5748 #include <sys/sysmacros.h>
5749 int main(void) {
5750     return makedev(0, 0);
5751 }
5752 EOF
5753 if compile_prog "" "" ; then
5754     have_sysmacros=yes
5755 fi
5756
5757 ##########################################
5758 # Veritas HyperScale block driver VxHS
5759 # Check if libvxhs is installed
5760
5761 if test "$vxhs" != "no" ; then
5762   cat > $TMPC <<EOF
5763 #include <stdint.h>
5764 #include <qnio/qnio_api.h>
5765
5766 void *vxhs_callback;
5767
5768 int main(void) {
5769     iio_init(QNIO_VERSION, vxhs_callback);
5770     return 0;
5771 }
5772 EOF
5773   vxhs_libs="-lvxhs -lssl"
5774   if compile_prog "" "$vxhs_libs" ; then
5775     vxhs=yes
5776   else
5777     if test "$vxhs" = "yes" ; then
5778       feature_not_found "vxhs block device" "Install libvxhs See github"
5779     fi
5780     vxhs=no
5781   fi
5782 fi
5783
5784 ##########################################
5785 # check for _Static_assert()
5786
5787 have_static_assert=no
5788 cat > $TMPC << EOF
5789 _Static_assert(1, "success");
5790 int main(void) {
5791     return 0;
5792 }
5793 EOF
5794 if compile_prog "" "" ; then
5795     have_static_assert=yes
5796 fi
5797
5798 ##########################################
5799 # check for utmpx.h, it is missing e.g. on OpenBSD
5800
5801 have_utmpx=no
5802 cat > $TMPC << EOF
5803 #include <utmpx.h>
5804 struct utmpx user_info;
5805 int main(void) {
5806     return 0;
5807 }
5808 EOF
5809 if compile_prog "" "" ; then
5810     have_utmpx=yes
5811 fi
5812
5813 ##########################################
5814 # check for getrandom()
5815
5816 have_getrandom=no
5817 cat > $TMPC << EOF
5818 #include <sys/random.h>
5819 int main(void) {
5820     return getrandom(0, 0, GRND_NONBLOCK);
5821 }
5822 EOF
5823 if compile_prog "" "" ; then
5824     have_getrandom=yes
5825 fi
5826
5827 ##########################################
5828 # checks for sanitizers
5829
5830 have_asan=no
5831 have_ubsan=no
5832 have_asan_iface_h=no
5833 have_asan_iface_fiber=no
5834
5835 if test "$sanitizers" = "yes" ; then
5836   write_c_skeleton
5837   if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" ""; then
5838       have_asan=yes
5839   fi
5840
5841   # we could use a simple skeleton for flags checks, but this also
5842   # detect the static linking issue of ubsan, see also:
5843   # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84285
5844   cat > $TMPC << EOF
5845 #include <stdlib.h>
5846 int main(void) {
5847     void *tmp = malloc(10);
5848     return *(int *)(tmp + 2);
5849 }
5850 EOF
5851   if compile_prog "$CPU_CFLAGS -Werror -fsanitize=undefined" ""; then
5852       have_ubsan=yes
5853   fi
5854
5855   if check_include "sanitizer/asan_interface.h" ; then
5856       have_asan_iface_h=yes
5857   fi
5858
5859   cat > $TMPC << EOF
5860 #include <sanitizer/asan_interface.h>
5861 int main(void) {
5862   __sanitizer_start_switch_fiber(0, 0, 0);
5863   return 0;
5864 }
5865 EOF
5866   if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" "" ; then
5867       have_asan_iface_fiber=yes
5868   fi
5869 fi
5870
5871 ##########################################
5872 # check for libpmem
5873
5874 if test "$libpmem" != "no"; then
5875         if $pkg_config --exists "libpmem"; then
5876                 libpmem="yes"
5877                 libpmem_libs=$($pkg_config --libs libpmem)
5878                 libpmem_cflags=$($pkg_config --cflags libpmem)
5879                 libs_softmmu="$libs_softmmu $libpmem_libs"
5880                 QEMU_CFLAGS="$QEMU_CFLAGS $libpmem_cflags"
5881         else
5882                 if test "$libpmem" = "yes" ; then
5883                         feature_not_found "libpmem" "Install nvml or pmdk"
5884                 fi
5885                 libpmem="no"
5886         fi
5887 fi
5888
5889 ##########################################
5890 # check for slirp
5891
5892 case "$slirp" in
5893   "" | yes)
5894     if $pkg_config slirp; then
5895       slirp=system
5896     elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
5897       slirp=git
5898     elif test -e "${source_path}/slirp/Makefile" ; then
5899       slirp=internal
5900     elif test -z "$slirp" ; then
5901       slirp=no
5902     else
5903       feature_not_found "slirp" "Install slirp devel or git submodule"
5904     fi
5905     ;;
5906
5907   system)
5908     if ! $pkg_config slirp; then
5909       feature_not_found "slirp" "Install slirp devel"
5910     fi
5911     ;;
5912 esac
5913
5914 case "$slirp" in
5915   git | internal)
5916     if test "$slirp" = git; then
5917       git_submodules="${git_submodules} slirp"
5918     fi
5919     mkdir -p slirp
5920     slirp_cflags="-I\$(SRC_PATH)/slirp/src -I\$(BUILD_DIR)/slirp/src"
5921     slirp_libs="-L\$(BUILD_DIR)/slirp -lslirp"
5922     ;;
5923
5924   system)
5925     slirp_version=$($pkg_config --modversion slirp 2>/dev/null)
5926     slirp_cflags=$($pkg_config --cflags slirp 2>/dev/null)
5927     slirp_libs=$($pkg_config --libs slirp 2>/dev/null)
5928     ;;
5929
5930   no)
5931     ;;
5932   *)
5933     error_exit "Unknown state for slirp: $slirp"
5934     ;;
5935 esac
5936
5937
5938 ##########################################
5939 # End of CC checks
5940 # After here, no more $cc or $ld runs
5941
5942 write_c_skeleton
5943
5944 if test "$gcov" = "yes" ; then
5945   CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS"
5946   LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS"
5947 elif test "$fortify_source" = "yes" ; then
5948   CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
5949 elif test "$debug" = "no"; then
5950   CFLAGS="-O2 $CFLAGS"
5951 fi
5952
5953 if test "$have_asan" = "yes"; then
5954   CFLAGS="-fsanitize=address $CFLAGS"
5955   if test "$have_asan_iface_h" = "no" ; then
5956       echo "ASAN build enabled, but ASAN header missing." \
5957            "Without code annotation, the report may be inferior."
5958   elif test "$have_asan_iface_fiber" = "no" ; then
5959       echo "ASAN build enabled, but ASAN header is too old." \
5960            "Without code annotation, the report may be inferior."
5961   fi
5962 fi
5963 if test "$have_ubsan" = "yes"; then
5964   CFLAGS="-fsanitize=undefined $CFLAGS"
5965 fi
5966
5967 ##########################################
5968 # Do we have libnfs
5969 if test "$libnfs" != "no" ; then
5970   if $pkg_config --atleast-version=1.9.3 libnfs; then
5971     libnfs="yes"
5972     libnfs_libs=$($pkg_config --libs libnfs)
5973   else
5974     if test "$libnfs" = "yes" ; then
5975       feature_not_found "libnfs" "Install libnfs devel >= 1.9.3"
5976     fi
5977     libnfs="no"
5978   fi
5979 fi
5980
5981 ##########################################
5982 # Do we have libudev
5983 if test "$libudev" != "no" ; then
5984   if $pkg_config libudev && test "$static" != "yes"; then
5985     libudev="yes"
5986     libudev_libs=$($pkg_config --libs libudev)
5987   else
5988     libudev="no"
5989   fi
5990 fi
5991
5992 # Now we've finished running tests it's OK to add -Werror to the compiler flags
5993 if test "$werror" = "yes"; then
5994     QEMU_CFLAGS="-Werror $QEMU_CFLAGS"
5995 fi
5996
5997 if test "$solaris" = "no" ; then
5998     if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
5999         LDFLAGS="-Wl,--warn-common $LDFLAGS"
6000     fi
6001 fi
6002
6003 # test if pod2man has --utf8 option
6004 if pod2man --help | grep -q utf8; then
6005     POD2MAN="pod2man --utf8"
6006 else
6007     POD2MAN="pod2man"
6008 fi
6009
6010 # Use ASLR, no-SEH and DEP if available
6011 if test "$mingw32" = "yes" ; then
6012     for flag in --dynamicbase --no-seh --nxcompat; do
6013         if ld_has $flag ; then
6014             LDFLAGS="-Wl,$flag $LDFLAGS"
6015         fi
6016     done
6017 fi
6018
6019 # Disable OpenBSD W^X if available
6020 if test "$tcg" = "yes" && test "$targetos" = "OpenBSD"; then
6021     cat > $TMPC <<EOF
6022     int main(void) { return 0; }
6023 EOF
6024     wx_ldflags="-Wl,-z,wxneeded"
6025     if compile_prog "" "$wx_ldflags"; then
6026         QEMU_LDFLAGS="$QEMU_LDFLAGS $wx_ldflags"
6027     fi
6028 fi
6029
6030 qemu_confdir=$sysconfdir$confsuffix
6031 qemu_moddir=$libdir$confsuffix
6032 qemu_datadir=$datadir$confsuffix
6033 qemu_localedir="$datadir/locale"
6034 qemu_icondir="$datadir/icons"
6035 qemu_desktopdir="$datadir/applications"
6036
6037 # We can only support ivshmem if we have eventfd
6038 if [ "$eventfd" = "yes" ]; then
6039   ivshmem=yes
6040 fi
6041
6042 tools=""
6043 if test "$want_tools" = "yes" ; then
6044   tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) qemu-edid\$(EXESUF) $tools"
6045   if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
6046     tools="qemu-nbd\$(EXESUF) $tools"
6047   fi
6048   if [ "$ivshmem" = "yes" ]; then
6049     tools="ivshmem-client\$(EXESUF) ivshmem-server\$(EXESUF) $tools"
6050   fi
6051   if [ "$curl" = "yes" ]; then
6052       tools="elf2dmp\$(EXESUF) $tools"
6053   fi
6054 fi
6055 if test "$softmmu" = yes ; then
6056   if test "$linux" = yes; then
6057     if test "$virtfs" != no && test "$cap" = yes && test "$attr" = yes ; then
6058       virtfs=yes
6059       tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
6060     else
6061       if test "$virtfs" = yes; then
6062         error_exit "VirtFS requires libcap devel and libattr devel"
6063       fi
6064       virtfs=no
6065     fi
6066     if test "$mpath" != no && test "$mpathpersist" = yes ; then
6067       mpath=yes
6068     else
6069       if test "$mpath" = yes; then
6070         error_exit "Multipath requires libmpathpersist devel"
6071       fi
6072       mpath=no
6073     fi
6074     tools="$tools scsi/qemu-pr-helper\$(EXESUF)"
6075   else
6076     if test "$virtfs" = yes; then
6077       error_exit "VirtFS is supported only on Linux"
6078     fi
6079     virtfs=no
6080     if test "$mpath" = yes; then
6081       error_exit "Multipath is supported only on Linux"
6082     fi
6083     mpath=no
6084   fi
6085   if test "$xkbcommon" = "yes"; then
6086     tools="qemu-keymap\$(EXESUF) $tools"
6087   fi
6088 fi
6089
6090 # Probe for guest agent support/options
6091
6092 if [ "$guest_agent" != "no" ]; then
6093   if [ "$softmmu" = no -a "$want_tools" = no ] ; then
6094       guest_agent=no
6095   elif [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
6096       tools="qemu-ga\$(EXESUF) $tools"
6097       guest_agent=yes
6098   elif [ "$guest_agent" != yes ]; then
6099       guest_agent=no
6100   else
6101       error_exit "Guest agent is not supported on this platform"
6102   fi
6103 fi
6104
6105 # Guest agent Window MSI  package
6106
6107 if test "$guest_agent" != yes; then
6108   if test "$guest_agent_msi" = yes; then
6109     error_exit "MSI guest agent package requires guest agent enabled"
6110   fi
6111   guest_agent_msi=no
6112 elif test "$mingw32" != "yes"; then
6113   if test "$guest_agent_msi" = "yes"; then
6114     error_exit "MSI guest agent package is available only for MinGW Windows cross-compilation"
6115   fi
6116   guest_agent_msi=no
6117 elif ! has wixl; then
6118   if test "$guest_agent_msi" = "yes"; then
6119     error_exit "MSI guest agent package requires wixl tool installed ( usually from msitools package )"
6120   fi
6121   guest_agent_msi=no
6122 else
6123   # we support qemu-ga, mingw32, and wixl: default to MSI enabled if it wasn't
6124   # disabled explicitly
6125   if test "$guest_agent_msi" != "no"; then
6126     guest_agent_msi=yes
6127   fi
6128 fi
6129
6130 if test "$guest_agent_msi" = "yes"; then
6131   if test "$guest_agent_with_vss" = "yes"; then
6132     QEMU_GA_MSI_WITH_VSS="-D InstallVss"
6133   fi
6134
6135   if test "$QEMU_GA_MANUFACTURER" = ""; then
6136     QEMU_GA_MANUFACTURER=QEMU
6137   fi
6138
6139   if test "$QEMU_GA_DISTRO" = ""; then
6140     QEMU_GA_DISTRO=Linux
6141   fi
6142
6143   if test "$QEMU_GA_VERSION" = ""; then
6144       QEMU_GA_VERSION=$(cat $source_path/VERSION)
6145   fi
6146
6147   QEMU_GA_MSI_MINGW_DLL_PATH="-D Mingw_dlls=$($pkg_config --variable=prefix glib-2.0)/bin"
6148
6149   case "$cpu" in
6150   x86_64)
6151     QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
6152     ;;
6153   i386)
6154     QEMU_GA_MSI_ARCH="-D Arch=32"
6155     ;;
6156   *)
6157     error_exit "CPU $cpu not supported for building installation package"
6158     ;;
6159   esac
6160 fi
6161
6162 # Mac OS X ships with a broken assembler
6163 roms=
6164 if { test "$cpu" = "i386" || test "$cpu" = "x86_64"; } && \
6165         test "$targetos" != "Darwin" && test "$targetos" != "SunOS" && \
6166         test "$softmmu" = yes ; then
6167     # Different host OS linkers have different ideas about the name of the ELF
6168     # emulation. Linux and OpenBSD/amd64 use 'elf_i386'; FreeBSD uses the _fbsd
6169     # variant; OpenBSD/i386 uses the _obsd variant; and Windows uses i386pe.
6170     for emu in elf_i386 elf_i386_fbsd elf_i386_obsd i386pe; do
6171         if "$ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
6172             ld_i386_emulation="$emu"
6173             roms="optionrom"
6174             break
6175         fi
6176     done
6177 fi
6178 if test "$ARCH" = "ppc64" && test "$targetos" != "Darwin" ; then
6179   roms="$roms spapr-rtas"
6180 fi
6181
6182 # Only build s390-ccw bios if we're on s390x and the compiler has -march=z900
6183 if test "$cpu" = "s390x" ; then
6184   write_c_skeleton
6185   if compile_prog "-march=z900" ""; then
6186     roms="$roms s390-ccw"
6187   fi
6188 fi
6189
6190 # Probe for the need for relocating the user-only binary.
6191 if ( [ "$linux_user" = yes ] || [ "$bsd_user" = yes ] ) && [ "$pie" = no ]; then
6192   textseg_addr=
6193   case "$cpu" in
6194     arm | i386 | ppc* | s390* | sparc* | x86_64 | x32)
6195       # ??? Rationale for choosing this address
6196       textseg_addr=0x60000000
6197       ;;
6198     mips)
6199       # A 256M aligned address, high in the address space, with enough
6200       # room for the code_gen_buffer above it before the stack.
6201       textseg_addr=0x60000000
6202       ;;
6203   esac
6204   if [ -n "$textseg_addr" ]; then
6205     cat > $TMPC <<EOF
6206     int main(void) { return 0; }
6207 EOF
6208     textseg_ldflags="-Wl,-Ttext-segment=$textseg_addr"
6209     if ! compile_prog "" "$textseg_ldflags"; then
6210       # In case ld does not support -Ttext-segment, edit the default linker
6211       # script via sed to set the .text start addr.  This is needed on FreeBSD
6212       # at least.
6213       if ! $ld --verbose >/dev/null 2>&1; then
6214         error_exit \
6215             "We need to link the QEMU user mode binaries at a" \
6216             "specific text address. Unfortunately your linker" \
6217             "doesn't support either the -Ttext-segment option or" \
6218             "printing the default linker script with --verbose." \
6219             "If you don't want the user mode binaries, pass the" \
6220             "--disable-user option to configure."
6221       fi
6222
6223       $ld --verbose | sed \
6224         -e '1,/==================================================/d' \
6225         -e '/==================================================/,$d' \
6226         -e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \
6227         -e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld
6228       textseg_ldflags="-Wl,-T../config-host.ld"
6229     fi
6230   fi
6231 fi
6232
6233 # Check that the C++ compiler exists and works with the C compiler.
6234 # All the QEMU_CXXFLAGS are based on QEMU_CFLAGS. Keep this at the end to don't miss any other that could be added.
6235 if has $cxx; then
6236     cat > $TMPC <<EOF
6237 int c_function(void);
6238 int main(void) { return c_function(); }
6239 EOF
6240
6241     compile_object
6242
6243     cat > $TMPCXX <<EOF
6244 extern "C" {
6245    int c_function(void);
6246 }
6247 int c_function(void) { return 42; }
6248 EOF
6249
6250     update_cxxflags
6251
6252     if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
6253         # C++ compiler $cxx works ok with C compiler $cc
6254         :
6255     else
6256         echo "C++ compiler $cxx does not work with C compiler $cc"
6257         echo "Disabling C++ specific optional code"
6258         cxx=
6259     fi
6260 else
6261     echo "No C++ compiler available; disabling C++ specific optional code"
6262     cxx=
6263 fi
6264
6265 echo_version() {
6266     if test "$1" = "yes" ; then
6267         echo "($2)"
6268     fi
6269 }
6270
6271 # prepend pixman and ftd flags after all config tests are done
6272 QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS"
6273 QEMU_LDFLAGS="$fdt_ldflags $QEMU_LDFLAGS"
6274 libs_softmmu="$pixman_libs $libs_softmmu"
6275
6276 echo "Install prefix    $prefix"
6277 echo "BIOS directory    $(eval echo $qemu_datadir)"
6278 echo "firmware path     $(eval echo $firmwarepath)"
6279 echo "binary directory  $(eval echo $bindir)"
6280 echo "library directory $(eval echo $libdir)"
6281 echo "module directory  $(eval echo $qemu_moddir)"
6282 echo "libexec directory $(eval echo $libexecdir)"
6283 echo "include directory $(eval echo $includedir)"
6284 echo "config directory  $(eval echo $sysconfdir)"
6285 if test "$mingw32" = "no" ; then
6286 echo "local state directory   $(eval echo $local_statedir)"
6287 echo "Manual directory  $(eval echo $mandir)"
6288 echo "ELF interp prefix $interp_prefix"
6289 else
6290 echo "local state directory   queried at runtime"
6291 echo "Windows SDK       $win_sdk"
6292 fi
6293 echo "Source path       $source_path"
6294 echo "GIT binary        $git"
6295 echo "GIT submodules    $git_submodules"
6296 echo "C compiler        $cc"
6297 echo "Host C compiler   $host_cc"
6298 echo "C++ compiler      $cxx"
6299 echo "Objective-C compiler $objcc"
6300 echo "ARFLAGS           $ARFLAGS"
6301 echo "CFLAGS            $CFLAGS"
6302 echo "QEMU_CFLAGS       $QEMU_CFLAGS"
6303 echo "LDFLAGS           $LDFLAGS"
6304 echo "QEMU_LDFLAGS      $QEMU_LDFLAGS"
6305 echo "make              $make"
6306 echo "install           $install"
6307 echo "python            $python ($python_version)"
6308 echo "slirp support     $slirp $(echo_version $slirp $slirp_version)"
6309 if test "$slirp" != "no" ; then
6310     echo "smbd              $smbd"
6311 fi
6312 echo "module support    $modules"
6313 echo "host CPU          $cpu"
6314 echo "host big endian   $bigendian"
6315 echo "target list       $target_list"
6316 echo "gprof enabled     $gprof"
6317 echo "sparse enabled    $sparse"
6318 echo "strip binaries    $strip_opt"
6319 echo "profiler          $profiler"
6320 echo "static build      $static"
6321 if test "$darwin" = "yes" ; then
6322     echo "Cocoa support     $cocoa"
6323 fi
6324 echo "SDL support       $sdl $(echo_version $sdl $sdlversion)"
6325 echo "SDL image support $sdl_image"
6326 echo "GTK support       $gtk $(echo_version $gtk $gtk_version)"
6327 echo "GTK GL support    $gtk_gl"
6328 echo "VTE support       $vte $(echo_version $vte $vteversion)"
6329 echo "TLS priority      $tls_priority"
6330 echo "GNUTLS support    $gnutls"
6331 echo "libgcrypt         $gcrypt"
6332 echo "nettle            $nettle $(echo_version $nettle $nettle_version)"
6333 echo "libtasn1          $tasn1"
6334 echo "PAM               $auth_pam"
6335 echo "iconv support     $iconv"
6336 echo "curses support    $curses"
6337 echo "virgl support     $virglrenderer $(echo_version $virglrenderer $virgl_version)"
6338 echo "curl support      $curl"
6339 echo "mingw32 support   $mingw32"
6340 echo "Audio drivers     $audio_drv_list"
6341 echo "Block whitelist (rw) $block_drv_rw_whitelist"
6342 echo "Block whitelist (ro) $block_drv_ro_whitelist"
6343 echo "VirtFS support    $virtfs"
6344 echo "Multipath support $mpath"
6345 echo "VNC support       $vnc"
6346 if test "$vnc" = "yes" ; then
6347     echo "VNC SASL support  $vnc_sasl"
6348     echo "VNC JPEG support  $vnc_jpeg"
6349     echo "VNC PNG support   $vnc_png"
6350 fi
6351 echo "xen support       $xen"
6352 if test "$xen" = "yes" ; then
6353   echo "xen ctrl version  $xen_ctrl_version"
6354 fi
6355 echo "brlapi support    $brlapi"
6356 echo "bluez  support    $bluez"
6357 echo "Documentation     $docs"
6358 echo "PIE               $pie"
6359 echo "vde support       $vde"
6360 echo "netmap support    $netmap"
6361 echo "Linux AIO support $linux_aio"
6362 echo "ATTR/XATTR support $attr"
6363 echo "Install blobs     $blobs"
6364 echo "KVM support       $kvm"
6365 echo "HAX support       $hax"
6366 echo "HVF support       $hvf"
6367 echo "WHPX support      $whpx"
6368 echo "TCG support       $tcg"
6369 if test "$tcg" = "yes" ; then
6370     echo "TCG debug enabled $debug_tcg"
6371     echo "TCG interpreter   $tcg_interpreter"
6372 fi
6373 echo "malloc trim support $malloc_trim"
6374 echo "RDMA support      $rdma"
6375 echo "PVRDMA support    $pvrdma"
6376 echo "fdt support       $fdt"
6377 echo "membarrier        $membarrier"
6378 echo "preadv support    $preadv"
6379 echo "fdatasync         $fdatasync"
6380 echo "madvise           $madvise"
6381 echo "posix_madvise     $posix_madvise"
6382 echo "posix_memalign    $posix_memalign"
6383 echo "libcap-ng support $cap_ng"
6384 echo "vhost-net support $vhost_net"
6385 echo "vhost-crypto support $vhost_crypto"
6386 echo "vhost-scsi support $vhost_scsi"
6387 echo "vhost-vsock support $vhost_vsock"
6388 echo "vhost-user support $vhost_user"
6389 echo "vhost-user-fs support $vhost_user_fs"
6390 echo "Trace backends    $trace_backends"
6391 if have_backend "simple"; then
6392 echo "Trace output file $trace_file-<pid>"
6393 fi
6394 echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
6395 echo "rbd support       $rbd"
6396 echo "xfsctl support    $xfs"
6397 echo "smartcard support $smartcard"
6398 echo "libusb            $libusb"
6399 echo "usb net redir     $usb_redir"
6400 echo "OpenGL support    $opengl"
6401 echo "OpenGL dmabufs    $opengl_dmabuf"
6402 echo "libiscsi support  $libiscsi"
6403 echo "libnfs support    $libnfs"
6404 echo "build guest agent $guest_agent"
6405 echo "QGA VSS support   $guest_agent_with_vss"
6406 echo "QGA w32 disk info $guest_agent_ntddscsi"
6407 echo "QGA MSI support   $guest_agent_msi"
6408 echo "seccomp support   $seccomp"
6409 echo "coroutine backend $coroutine"
6410 echo "coroutine pool    $coroutine_pool"
6411 echo "debug stack usage $debug_stack_usage"
6412 echo "mutex debugging   $debug_mutex"
6413 echo "crypto afalg      $crypto_afalg"
6414 echo "GlusterFS support $glusterfs"
6415 echo "gcov              $gcov_tool"
6416 echo "gcov enabled      $gcov"
6417 echo "TPM support       $tpm"
6418 echo "libssh support    $libssh"
6419 echo "QOM debugging     $qom_cast_debug"
6420 echo "Live block migration $live_block_migration"
6421 echo "lzo support       $lzo"
6422 echo "snappy support    $snappy"
6423 echo "bzip2 support     $bzip2"
6424 echo "lzfse support     $lzfse"
6425 echo "NUMA host support $numa"
6426 echo "libxml2           $libxml2"
6427 echo "tcmalloc support  $tcmalloc"
6428 echo "jemalloc support  $jemalloc"
6429 echo "avx2 optimization $avx2_opt"
6430 echo "replication support $replication"
6431 echo "VxHS block device $vxhs"
6432 echo "bochs support     $bochs"
6433 echo "cloop support     $cloop"
6434 echo "dmg support       $dmg"
6435 echo "qcow v1 support   $qcow1"
6436 echo "vdi support       $vdi"
6437 echo "vvfat support     $vvfat"
6438 echo "qed support       $qed"
6439 echo "parallels support $parallels"
6440 echo "sheepdog support  $sheepdog"
6441 echo "capstone          $capstone"
6442 echo "libpmem support   $libpmem"
6443 echo "libudev           $libudev"
6444 echo "default devices   $default_devices"
6445
6446 if test "$supported_cpu" = "no"; then
6447     echo
6448     echo "WARNING: SUPPORT FOR THIS HOST CPU WILL GO AWAY IN FUTURE RELEASES!"
6449     echo
6450     echo "CPU host architecture $cpu support is not currently maintained."
6451     echo "The QEMU project intends to remove support for this host CPU in"
6452     echo "a future release if nobody volunteers to maintain it and to"
6453     echo "provide a build host for our continuous integration setup."
6454     echo "configure has succeeded and you can continue to build, but"
6455     echo "if you care about QEMU on this platform you should contact"
6456     echo "us upstream at qemu-devel@nongnu.org."
6457 fi
6458
6459 if test "$supported_os" = "no"; then
6460     echo
6461     echo "WARNING: SUPPORT FOR THIS HOST OS WILL GO AWAY IN FUTURE RELEASES!"
6462     echo
6463     echo "Host OS $targetos support is not currently maintained."
6464     echo "The QEMU project intends to remove support for this host OS in"
6465     echo "a future release if nobody volunteers to maintain it and to"
6466     echo "provide a build host for our continuous integration setup."
6467     echo "configure has succeeded and you can continue to build, but"
6468     echo "if you care about QEMU on this platform you should contact"
6469     echo "us upstream at qemu-devel@nongnu.org."
6470 fi
6471
6472 # Note that if the Python conditional here evaluates True we will exit
6473 # with status 1 which is a shell 'false' value.
6474 if ! $python -c 'import sys; sys.exit(sys.version_info < (3,0))'; then
6475   echo
6476   echo "warning: Python 2 support is deprecated" >&2
6477   echo "warning: Python 3 will be required for building future versions of QEMU" >&2
6478   python2="y"
6479 fi
6480
6481 config_host_mak="config-host.mak"
6482
6483 echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
6484
6485 echo "# Automatically generated by configure - do not modify" > $config_host_mak
6486 echo >> $config_host_mak
6487
6488 echo all: >> $config_host_mak
6489 echo "prefix=$prefix" >> $config_host_mak
6490 echo "bindir=$bindir" >> $config_host_mak
6491 echo "libdir=$libdir" >> $config_host_mak
6492 echo "libexecdir=$libexecdir" >> $config_host_mak
6493 echo "includedir=$includedir" >> $config_host_mak
6494 echo "mandir=$mandir" >> $config_host_mak
6495 echo "sysconfdir=$sysconfdir" >> $config_host_mak
6496 echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
6497 echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
6498 echo "qemu_firmwarepath=$firmwarepath" >> $config_host_mak
6499 echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
6500 echo "qemu_moddir=$qemu_moddir" >> $config_host_mak
6501 if test "$mingw32" = "no" ; then
6502   echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
6503 fi
6504 echo "qemu_helperdir=$libexecdir" >> $config_host_mak
6505 echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
6506 echo "qemu_icondir=$qemu_icondir" >> $config_host_mak
6507 echo "qemu_desktopdir=$qemu_desktopdir" >> $config_host_mak
6508 echo "libs_cpu=$libs_cpu" >> $config_host_mak
6509 echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
6510 echo "GIT=$git" >> $config_host_mak
6511 echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak
6512 echo "GIT_UPDATE=$git_update" >> $config_host_mak
6513
6514 echo "ARCH=$ARCH" >> $config_host_mak
6515
6516 if test "$default_devices" = "yes" ; then
6517   echo "CONFIG_MINIKCONF_MODE=--defconfig" >> $config_host_mak
6518 else
6519   echo "CONFIG_MINIKCONF_MODE=--allnoconfig" >> $config_host_mak
6520 fi
6521 if test "$debug_tcg" = "yes" ; then
6522   echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
6523 fi
6524 if test "$strip_opt" = "yes" ; then
6525   echo "STRIP=${strip}" >> $config_host_mak
6526 fi
6527 if test "$bigendian" = "yes" ; then
6528   echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak
6529 fi
6530 if test "$mingw32" = "yes" ; then
6531   echo "CONFIG_WIN32=y" >> $config_host_mak
6532   rc_version=$(cat $source_path/VERSION)
6533   version_major=${rc_version%%.*}
6534   rc_version=${rc_version#*.}
6535   version_minor=${rc_version%%.*}
6536   rc_version=${rc_version#*.}
6537   version_subminor=${rc_version%%.*}
6538   version_micro=0
6539   echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
6540   echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
6541   if test "$guest_agent_with_vss" = "yes" ; then
6542     echo "CONFIG_QGA_VSS=y" >> $config_host_mak
6543     echo "QGA_VSS_PROVIDER=$qga_vss_provider" >> $config_host_mak
6544     echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
6545   fi
6546   if test "$guest_agent_ntddscsi" = "yes" ; then
6547     echo "CONFIG_QGA_NTDDSCSI=y" >> $config_host_mak
6548   fi
6549   if test "$guest_agent_msi" = "yes"; then
6550     echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
6551     echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
6552     echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >> $config_host_mak
6553     echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
6554     echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >> $config_host_mak
6555     echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
6556     echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
6557   fi
6558 else
6559   echo "CONFIG_POSIX=y" >> $config_host_mak
6560 fi
6561
6562 if test "$linux" = "yes" ; then
6563   echo "CONFIG_LINUX=y" >> $config_host_mak
6564 fi
6565
6566 if test "$darwin" = "yes" ; then
6567   echo "CONFIG_DARWIN=y" >> $config_host_mak
6568 fi
6569
6570 if test "$solaris" = "yes" ; then
6571   echo "CONFIG_SOLARIS=y" >> $config_host_mak
6572 fi
6573 if test "$haiku" = "yes" ; then
6574   echo "CONFIG_HAIKU=y" >> $config_host_mak
6575 fi
6576 if test "$static" = "yes" ; then
6577   echo "CONFIG_STATIC=y" >> $config_host_mak
6578 fi
6579 if test "$profiler" = "yes" ; then
6580   echo "CONFIG_PROFILER=y" >> $config_host_mak
6581 fi
6582 if test "$want_tools" = "yes" ; then
6583   echo "CONFIG_TOOLS=y" >> $config_host_mak
6584 fi
6585 if test "$slirp" != "no"; then
6586   echo "CONFIG_SLIRP=y" >> $config_host_mak
6587   echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
6588   echo "SLIRP_CFLAGS=$slirp_cflags" >> $config_host_mak
6589   echo "SLIRP_LIBS=$slirp_libs" >> $config_host_mak
6590 fi
6591 if [ "$slirp" = "git" -o "$slirp" = "internal" ]; then
6592     echo "config-host.h: slirp/all" >> $config_host_mak
6593 fi
6594 if test "$vde" = "yes" ; then
6595   echo "CONFIG_VDE=y" >> $config_host_mak
6596   echo "VDE_LIBS=$vde_libs" >> $config_host_mak
6597 fi
6598 if test "$netmap" = "yes" ; then
6599   echo "CONFIG_NETMAP=y" >> $config_host_mak
6600 fi
6601 if test "$l2tpv3" = "yes" ; then
6602   echo "CONFIG_L2TPV3=y" >> $config_host_mak
6603 fi
6604 if test "$cap_ng" = "yes" ; then
6605   echo "CONFIG_LIBCAP=y" >> $config_host_mak
6606 fi
6607 echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
6608 for drv in $audio_drv_list; do
6609     def=CONFIG_AUDIO_$(echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]')
6610     case "$drv" in
6611         alsa | oss | pa | sdl)
6612             echo "$def=m" >> $config_host_mak ;;
6613         *)
6614             echo "$def=y" >> $config_host_mak ;;
6615     esac
6616 done
6617 echo "ALSA_LIBS=$alsa_libs" >> $config_host_mak
6618 echo "PULSE_LIBS=$pulse_libs" >> $config_host_mak
6619 echo "COREAUDIO_LIBS=$coreaudio_libs" >> $config_host_mak
6620 echo "DSOUND_LIBS=$dsound_libs" >> $config_host_mak
6621 echo "OSS_LIBS=$oss_libs" >> $config_host_mak
6622 if test "$audio_win_int" = "yes" ; then
6623   echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
6624 fi
6625 echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
6626 echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
6627 if test "$vnc" = "yes" ; then
6628   echo "CONFIG_VNC=y" >> $config_host_mak
6629 fi
6630 if test "$vnc_sasl" = "yes" ; then
6631   echo "CONFIG_VNC_SASL=y" >> $config_host_mak
6632 fi
6633 if test "$vnc_jpeg" = "yes" ; then
6634   echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
6635 fi
6636 if test "$vnc_png" = "yes" ; then
6637   echo "CONFIG_VNC_PNG=y" >> $config_host_mak
6638 fi
6639 if test "$xkbcommon" = "yes" ; then
6640   echo "XKBCOMMON_CFLAGS=$xkbcommon_cflags" >> $config_host_mak
6641   echo "XKBCOMMON_LIBS=$xkbcommon_libs" >> $config_host_mak
6642 fi
6643 if test "$xfs" = "yes" ; then
6644   echo "CONFIG_XFS=y" >> $config_host_mak
6645 fi
6646 qemu_version=$(head $source_path/VERSION)
6647 echo "VERSION=$qemu_version" >>$config_host_mak
6648 echo "PKGVERSION=$pkgversion" >>$config_host_mak
6649 echo "SRC_PATH=$source_path" >> $config_host_mak
6650 echo "TARGET_DIRS=$target_list" >> $config_host_mak
6651 if [ "$docs" = "yes" ] ; then
6652   echo "BUILD_DOCS=yes" >> $config_host_mak
6653 fi
6654 if test "$modules" = "yes"; then
6655   # $shacmd can generate a hash started with digit, which the compiler doesn't
6656   # like as an symbol. So prefix it with an underscore
6657   echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
6658   echo "CONFIG_MODULES=y" >> $config_host_mak
6659 fi
6660 if test "$have_x11" = "yes" && test "$need_x11" = "yes"; then
6661   echo "CONFIG_X11=y" >> $config_host_mak
6662   echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak
6663   echo "X11_LIBS=$x11_libs" >> $config_host_mak
6664 fi
6665 if test "$sdl" = "yes" ; then
6666   echo "CONFIG_SDL=m" >> $config_host_mak
6667   echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak
6668   echo "SDL_LIBS=$sdl_libs" >> $config_host_mak
6669   if test "$sdl_image" = "yes" ; then
6670       echo "CONFIG_SDL_IMAGE=y" >> $config_host_mak
6671   fi
6672 fi
6673 if test "$cocoa" = "yes" ; then
6674   echo "CONFIG_COCOA=y" >> $config_host_mak
6675 fi
6676 if test "$iconv" = "yes" ; then
6677   echo "CONFIG_ICONV=y" >> $config_host_mak
6678   echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak
6679   echo "ICONV_LIBS=$iconv_lib" >> $config_host_mak
6680 fi
6681 if test "$curses" = "yes" ; then
6682   echo "CONFIG_CURSES=m" >> $config_host_mak
6683   echo "CURSES_CFLAGS=$curses_inc" >> $config_host_mak
6684   echo "CURSES_LIBS=$curses_lib" >> $config_host_mak
6685 fi
6686 if test "$pipe2" = "yes" ; then
6687   echo "CONFIG_PIPE2=y" >> $config_host_mak
6688 fi
6689 if test "$accept4" = "yes" ; then
6690   echo "CONFIG_ACCEPT4=y" >> $config_host_mak
6691 fi
6692 if test "$splice" = "yes" ; then
6693   echo "CONFIG_SPLICE=y" >> $config_host_mak
6694 fi
6695 if test "$eventfd" = "yes" ; then
6696   echo "CONFIG_EVENTFD=y" >> $config_host_mak
6697 fi
6698 if test "$memfd" = "yes" ; then
6699   echo "CONFIG_MEMFD=y" >> $config_host_mak
6700 fi
6701 if test "$have_usbfs" = "yes" ; then
6702   echo "CONFIG_USBFS=y" >> $config_host_mak
6703 fi
6704 if test "$fallocate" = "yes" ; then
6705   echo "CONFIG_FALLOCATE=y" >> $config_host_mak
6706 fi
6707 if test "$fallocate_punch_hole" = "yes" ; then
6708   echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
6709 fi
6710 if test "$fallocate_zero_range" = "yes" ; then
6711   echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak
6712 fi
6713 if test "$posix_fallocate" = "yes" ; then
6714   echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak
6715 fi
6716 if test "$sync_file_range" = "yes" ; then
6717   echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
6718 fi
6719 if test "$fiemap" = "yes" ; then
6720   echo "CONFIG_FIEMAP=y" >> $config_host_mak
6721 fi
6722 if test "$dup3" = "yes" ; then
6723   echo "CONFIG_DUP3=y" >> $config_host_mak
6724 fi
6725 if test "$ppoll" = "yes" ; then
6726   echo "CONFIG_PPOLL=y" >> $config_host_mak
6727 fi
6728 if test "$prctl_pr_set_timerslack" = "yes" ; then
6729   echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak
6730 fi
6731 if test "$epoll" = "yes" ; then
6732   echo "CONFIG_EPOLL=y" >> $config_host_mak
6733 fi
6734 if test "$epoll_create1" = "yes" ; then
6735   echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
6736 fi
6737 if test "$sendfile" = "yes" ; then
6738   echo "CONFIG_SENDFILE=y" >> $config_host_mak
6739 fi
6740 if test "$timerfd" = "yes" ; then
6741   echo "CONFIG_TIMERFD=y" >> $config_host_mak
6742 fi
6743 if test "$setns" = "yes" ; then
6744   echo "CONFIG_SETNS=y" >> $config_host_mak
6745 fi
6746 if test "$clock_adjtime" = "yes" ; then
6747   echo "CONFIG_CLOCK_ADJTIME=y" >> $config_host_mak
6748 fi
6749 if test "$syncfs" = "yes" ; then
6750   echo "CONFIG_SYNCFS=y" >> $config_host_mak
6751 fi
6752 if test "$inotify" = "yes" ; then
6753   echo "CONFIG_INOTIFY=y" >> $config_host_mak
6754 fi
6755 if test "$inotify1" = "yes" ; then
6756   echo "CONFIG_INOTIFY1=y" >> $config_host_mak
6757 fi
6758 if test "$sem_timedwait" = "yes" ; then
6759   echo "CONFIG_SEM_TIMEDWAIT=y" >> $config_host_mak
6760 fi
6761 if test "$strchrnul" = "yes" ; then
6762   echo "HAVE_STRCHRNUL=y" >> $config_host_mak
6763 fi
6764 if test "$byteswap_h" = "yes" ; then
6765   echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
6766 fi
6767 if test "$bswap_h" = "yes" ; then
6768   echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
6769 fi
6770 if test "$curl" = "yes" ; then
6771   echo "CONFIG_CURL=m" >> $config_host_mak
6772   echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
6773   echo "CURL_LIBS=$curl_libs" >> $config_host_mak
6774 fi
6775 if test "$brlapi" = "yes" ; then
6776   echo "CONFIG_BRLAPI=y" >> $config_host_mak
6777   echo "BRLAPI_LIBS=$brlapi_libs" >> $config_host_mak
6778 fi
6779 if test "$bluez" = "yes" ; then
6780   echo "CONFIG_BLUEZ=y" >> $config_host_mak
6781   echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
6782 fi
6783 if test "$gtk" = "yes" ; then
6784   echo "CONFIG_GTK=m" >> $config_host_mak
6785   echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
6786   echo "GTK_LIBS=$gtk_libs" >> $config_host_mak
6787   if test "$gtk_gl" = "yes" ; then
6788     echo "CONFIG_GTK_GL=y" >> $config_host_mak
6789   fi
6790 fi
6791 if test "$gio" = "yes" ; then
6792     echo "CONFIG_GIO=y" >> $config_host_mak
6793     echo "GIO_CFLAGS=$gio_cflags" >> $config_host_mak
6794     echo "GIO_LIBS=$gio_libs" >> $config_host_mak
6795 fi
6796 echo "CONFIG_TLS_PRIORITY=\"$tls_priority\"" >> $config_host_mak
6797 if test "$gnutls" = "yes" ; then
6798   echo "CONFIG_GNUTLS=y" >> $config_host_mak
6799 fi
6800 if test "$gcrypt" = "yes" ; then
6801   echo "CONFIG_GCRYPT=y" >> $config_host_mak
6802   if test "$gcrypt_hmac" = "yes" ; then
6803     echo "CONFIG_GCRYPT_HMAC=y" >> $config_host_mak
6804   fi
6805 fi
6806 if test "$nettle" = "yes" ; then
6807   echo "CONFIG_NETTLE=y" >> $config_host_mak
6808   echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
6809 fi
6810 if test "$tasn1" = "yes" ; then
6811   echo "CONFIG_TASN1=y" >> $config_host_mak
6812 fi
6813 if test "$auth_pam" = "yes" ; then
6814     echo "CONFIG_AUTH_PAM=y" >> $config_host_mak
6815 fi
6816 if test "$have_ifaddrs_h" = "yes" ; then
6817     echo "HAVE_IFADDRS_H=y" >> $config_host_mak
6818 fi
6819 if test "$have_broken_size_max" = "yes" ; then
6820     echo "HAVE_BROKEN_SIZE_MAX=y" >> $config_host_mak
6821 fi
6822
6823 # Work around a system header bug with some kernel/XFS header
6824 # versions where they both try to define 'struct fsxattr':
6825 # xfs headers will not try to redefine structs from linux headers
6826 # if this macro is set.
6827 if test "$have_fsxattr" = "yes" ; then
6828     echo "HAVE_FSXATTR=y" >> $config_host_mak
6829 fi
6830 if test "$have_copy_file_range" = "yes" ; then
6831     echo "HAVE_COPY_FILE_RANGE=y" >> $config_host_mak
6832 fi
6833 if test "$vte" = "yes" ; then
6834   echo "CONFIG_VTE=y" >> $config_host_mak
6835   echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
6836   echo "VTE_LIBS=$vte_libs" >> $config_host_mak
6837 fi
6838 if test "$virglrenderer" = "yes" ; then
6839   echo "CONFIG_VIRGL=y" >> $config_host_mak
6840   echo "VIRGL_CFLAGS=$virgl_cflags" >> $config_host_mak
6841   echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak
6842 fi
6843 if test "$xen" = "yes" ; then
6844   echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
6845   echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
6846 fi
6847 if test "$linux_aio" = "yes" ; then
6848   echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
6849 fi
6850 if test "$attr" = "yes" ; then
6851   echo "CONFIG_ATTR=y" >> $config_host_mak
6852 fi
6853 if test "$libattr" = "yes" ; then
6854   echo "CONFIG_LIBATTR=y" >> $config_host_mak
6855 fi
6856 if test "$virtfs" = "yes" ; then
6857   echo "CONFIG_VIRTFS=y" >> $config_host_mak
6858 fi
6859 if test "$mpath" = "yes" ; then
6860   echo "CONFIG_MPATH=y" >> $config_host_mak
6861   if test "$mpathpersist_new_api" = "yes"; then
6862     echo "CONFIG_MPATH_NEW_API=y" >> $config_host_mak
6863   fi
6864 fi
6865 if test "$vhost_scsi" = "yes" ; then
6866   echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
6867 fi
6868 if test "$vhost_net" = "yes" ; then
6869   echo "CONFIG_VHOST_NET=y" >> $config_host_mak
6870 fi
6871 if test "$vhost_net_user" = "yes" ; then
6872   echo "CONFIG_VHOST_NET_USER=y" >> $config_host_mak
6873 fi
6874 if test "$vhost_crypto" = "yes" ; then
6875   echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
6876 fi
6877 if test "$vhost_vsock" = "yes" ; then
6878   echo "CONFIG_VHOST_VSOCK=y" >> $config_host_mak
6879 fi
6880 if test "$vhost_kernel" = "yes" ; then
6881   echo "CONFIG_VHOST_KERNEL=y" >> $config_host_mak
6882 fi
6883 if test "$vhost_user" = "yes" ; then
6884   echo "CONFIG_VHOST_USER=y" >> $config_host_mak
6885 fi
6886 if test "$vhost_user_fs" = "yes" ; then
6887   echo "CONFIG_VHOST_USER_FS=y" >> $config_host_mak
6888 fi
6889 if test "$blobs" = "yes" ; then
6890   echo "INSTALL_BLOBS=yes" >> $config_host_mak
6891 fi
6892 if test "$iovec" = "yes" ; then
6893   echo "CONFIG_IOVEC=y" >> $config_host_mak
6894 fi
6895 if test "$preadv" = "yes" ; then
6896   echo "CONFIG_PREADV=y" >> $config_host_mak
6897 fi
6898 if test "$fdt" != "no" ; then
6899   echo "CONFIG_FDT=y" >> $config_host_mak
6900 fi
6901 if test "$membarrier" = "yes" ; then
6902   echo "CONFIG_MEMBARRIER=y" >> $config_host_mak
6903 fi
6904 if test "$signalfd" = "yes" ; then
6905   echo "CONFIG_SIGNALFD=y" >> $config_host_mak
6906 fi
6907 if test "$optreset" = "yes" ; then
6908   echo "HAVE_OPTRESET=y" >> $config_host_mak
6909 fi
6910 if test "$tcg" = "yes"; then
6911   echo "CONFIG_TCG=y" >> $config_host_mak
6912   if test "$tcg_interpreter" = "yes" ; then
6913     echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
6914   fi
6915 fi
6916 if test "$fdatasync" = "yes" ; then
6917   echo "CONFIG_FDATASYNC=y" >> $config_host_mak
6918 fi
6919 if test "$madvise" = "yes" ; then
6920   echo "CONFIG_MADVISE=y" >> $config_host_mak
6921 fi
6922 if test "$posix_madvise" = "yes" ; then
6923   echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
6924 fi
6925 if test "$posix_memalign" = "yes" ; then
6926   echo "CONFIG_POSIX_MEMALIGN=y" >> $config_host_mak
6927 fi
6928
6929 if test "$spice" = "yes" ; then
6930   echo "CONFIG_SPICE=y" >> $config_host_mak
6931 fi
6932
6933 if test "$smartcard" = "yes" ; then
6934   echo "CONFIG_SMARTCARD=y" >> $config_host_mak
6935   echo "SMARTCARD_CFLAGS=$libcacard_cflags" >> $config_host_mak
6936   echo "SMARTCARD_LIBS=$libcacard_libs" >> $config_host_mak
6937 fi
6938
6939 if test "$libusb" = "yes" ; then
6940   echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
6941   echo "LIBUSB_CFLAGS=$libusb_cflags" >> $config_host_mak
6942   echo "LIBUSB_LIBS=$libusb_libs" >> $config_host_mak
6943 fi
6944
6945 if test "$usb_redir" = "yes" ; then
6946   echo "CONFIG_USB_REDIR=y" >> $config_host_mak
6947   echo "USB_REDIR_CFLAGS=$usb_redir_cflags" >> $config_host_mak
6948   echo "USB_REDIR_LIBS=$usb_redir_libs" >> $config_host_mak
6949 fi
6950
6951 if test "$opengl" = "yes" ; then
6952   echo "CONFIG_OPENGL=y" >> $config_host_mak
6953   echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
6954   if test "$opengl_dmabuf" = "yes" ; then
6955     echo "CONFIG_OPENGL_DMABUF=y" >> $config_host_mak
6956   fi
6957 fi
6958
6959 if test "$gbm" = "yes" ; then
6960     echo "CONFIG_GBM=y" >> $config_host_mak
6961     echo "GBM_LIBS=$gbm_libs" >> $config_host_mak
6962     echo "GBM_CFLAGS=$gbm_cflags" >> $config_host_mak
6963 fi
6964
6965
6966 if test "$malloc_trim" = "yes" ; then
6967   echo "CONFIG_MALLOC_TRIM=y" >> $config_host_mak
6968 fi
6969
6970 if test "$avx2_opt" = "yes" ; then
6971   echo "CONFIG_AVX2_OPT=y" >> $config_host_mak
6972 fi
6973
6974 if test "$lzo" = "yes" ; then
6975   echo "CONFIG_LZO=y" >> $config_host_mak
6976 fi
6977
6978 if test "$snappy" = "yes" ; then
6979   echo "CONFIG_SNAPPY=y" >> $config_host_mak
6980 fi
6981
6982 if test "$bzip2" = "yes" ; then
6983   echo "CONFIG_BZIP2=y" >> $config_host_mak
6984   echo "BZIP2_LIBS=-lbz2" >> $config_host_mak
6985 fi
6986
6987 if test "$lzfse" = "yes" ; then
6988   echo "CONFIG_LZFSE=y" >> $config_host_mak
6989   echo "LZFSE_LIBS=-llzfse" >> $config_host_mak
6990 fi
6991
6992 if test "$libiscsi" = "yes" ; then
6993   echo "CONFIG_LIBISCSI=m" >> $config_host_mak
6994   echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
6995   echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
6996 fi
6997
6998 if test "$libnfs" = "yes" ; then
6999   echo "CONFIG_LIBNFS=m" >> $config_host_mak
7000   echo "LIBNFS_LIBS=$libnfs_libs" >> $config_host_mak
7001 fi
7002
7003 if test "$seccomp" = "yes"; then
7004   echo "CONFIG_SECCOMP=y" >> $config_host_mak
7005   echo "SECCOMP_CFLAGS=$seccomp_cflags" >> $config_host_mak
7006   echo "SECCOMP_LIBS=$seccomp_libs" >> $config_host_mak
7007 fi
7008
7009 # XXX: suppress that
7010 if [ "$bsd" = "yes" ] ; then
7011   echo "CONFIG_BSD=y" >> $config_host_mak
7012 fi
7013
7014 if test "$localtime_r" = "yes" ; then
7015   echo "CONFIG_LOCALTIME_R=y" >> $config_host_mak
7016 fi
7017 if test "$qom_cast_debug" = "yes" ; then
7018   echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
7019 fi
7020 if test "$rbd" = "yes" ; then
7021   echo "CONFIG_RBD=m" >> $config_host_mak
7022   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
7023   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
7024 fi
7025
7026 echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
7027 if test "$coroutine_pool" = "yes" ; then
7028   echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
7029 else
7030   echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
7031 fi
7032
7033 if test "$debug_stack_usage" = "yes" ; then
7034   echo "CONFIG_DEBUG_STACK_USAGE=y" >> $config_host_mak
7035 fi
7036
7037 if test "$crypto_afalg" = "yes" ; then
7038   echo "CONFIG_AF_ALG=y" >> $config_host_mak
7039 fi
7040
7041 if test "$open_by_handle_at" = "yes" ; then
7042   echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
7043 fi
7044
7045 if test "$linux_magic_h" = "yes" ; then
7046   echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
7047 fi
7048
7049 if test "$pragma_diagnostic_available" = "yes" ; then
7050   echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak
7051 fi
7052
7053 if test "$valgrind_h" = "yes" ; then
7054   echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
7055 fi
7056
7057 if test "$have_asan_iface_fiber" = "yes" ; then
7058     echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak
7059 fi
7060
7061 if test "$has_environ" = "yes" ; then
7062   echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
7063 fi
7064
7065 if test "$cpuid_h" = "yes" ; then
7066   echo "CONFIG_CPUID_H=y" >> $config_host_mak
7067 fi
7068
7069 if test "$int128" = "yes" ; then
7070   echo "CONFIG_INT128=y" >> $config_host_mak
7071 fi
7072
7073 if test "$atomic128" = "yes" ; then
7074   echo "CONFIG_ATOMIC128=y" >> $config_host_mak
7075 fi
7076
7077 if test "$cmpxchg128" = "yes" ; then
7078   echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
7079 fi
7080
7081 if test "$atomic64" = "yes" ; then
7082   echo "CONFIG_ATOMIC64=y" >> $config_host_mak
7083 fi
7084
7085 if test "$vector16" = "yes" ; then
7086   echo "CONFIG_VECTOR16=y" >> $config_host_mak
7087 fi
7088
7089 if test "$getauxval" = "yes" ; then
7090   echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
7091 fi
7092
7093 if test "$glusterfs" = "yes" ; then
7094   echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
7095   echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
7096   echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
7097 fi
7098
7099 if test "$glusterfs_xlator_opt" = "yes" ; then
7100   echo "CONFIG_GLUSTERFS_XLATOR_OPT=y" >> $config_host_mak
7101 fi
7102
7103 if test "$glusterfs_discard" = "yes" ; then
7104   echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
7105 fi
7106
7107 if test "$glusterfs_fallocate" = "yes" ; then
7108   echo "CONFIG_GLUSTERFS_FALLOCATE=y" >> $config_host_mak
7109 fi
7110
7111 if test "$glusterfs_zerofill" = "yes" ; then
7112   echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
7113 fi
7114
7115 if test "$glusterfs_ftruncate_has_stat" = "yes" ; then
7116   echo "CONFIG_GLUSTERFS_FTRUNCATE_HAS_STAT=y" >> $config_host_mak
7117 fi
7118
7119 if test "$glusterfs_iocb_has_stat" = "yes" ; then
7120   echo "CONFIG_GLUSTERFS_IOCB_HAS_STAT=y" >> $config_host_mak
7121 fi
7122
7123 if test "$libssh" = "yes" ; then
7124   echo "CONFIG_LIBSSH=m" >> $config_host_mak
7125   echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
7126   echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
7127 fi
7128
7129 if test "$live_block_migration" = "yes" ; then
7130   echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
7131 fi
7132
7133 if test "$tpm" = "yes"; then
7134   echo 'CONFIG_TPM=y' >> $config_host_mak
7135 fi
7136
7137 echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
7138 if have_backend "nop"; then
7139   echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
7140 fi
7141 if have_backend "simple"; then
7142   echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
7143   # Set the appropriate trace file.
7144   trace_file="\"$trace_file-\" FMT_pid"
7145 fi
7146 if have_backend "log"; then
7147   echo "CONFIG_TRACE_LOG=y" >> $config_host_mak
7148 fi
7149 if have_backend "ust"; then
7150   echo "CONFIG_TRACE_UST=y" >> $config_host_mak
7151 fi
7152 if have_backend "dtrace"; then
7153   echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
7154   if test "$trace_backend_stap" = "yes" ; then
7155     echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
7156   fi
7157 fi
7158 if have_backend "ftrace"; then
7159   if test "$linux" = "yes" ; then
7160     echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
7161   else
7162     feature_not_found "ftrace(trace backend)" "ftrace requires Linux"
7163   fi
7164 fi
7165 if have_backend "syslog"; then
7166   if test "$posix_syslog" = "yes" ; then
7167     echo "CONFIG_TRACE_SYSLOG=y" >> $config_host_mak
7168   else
7169     feature_not_found "syslog(trace backend)" "syslog not available"
7170   fi
7171 fi
7172 echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
7173
7174 if test "$rdma" = "yes" ; then
7175   echo "CONFIG_RDMA=y" >> $config_host_mak
7176   echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak
7177 fi
7178
7179 if test "$pvrdma" = "yes" ; then
7180   echo "CONFIG_PVRDMA=y" >> $config_host_mak
7181 fi
7182
7183 if test "$have_rtnetlink" = "yes" ; then
7184   echo "CONFIG_RTNETLINK=y" >> $config_host_mak
7185 fi
7186
7187 if test "$libxml2" = "yes" ; then
7188   echo "CONFIG_LIBXML2=y" >> $config_host_mak
7189   echo "LIBXML2_CFLAGS=$libxml2_cflags" >> $config_host_mak
7190   echo "LIBXML2_LIBS=$libxml2_libs" >> $config_host_mak
7191 fi
7192
7193 if test "$replication" = "yes" ; then
7194   echo "CONFIG_REPLICATION=y" >> $config_host_mak
7195 fi
7196
7197 if test "$have_af_vsock" = "yes" ; then
7198   echo "CONFIG_AF_VSOCK=y" >> $config_host_mak
7199 fi
7200
7201 if test "$have_sysmacros" = "yes" ; then
7202   echo "CONFIG_SYSMACROS=y" >> $config_host_mak
7203 fi
7204
7205 if test "$have_static_assert" = "yes" ; then
7206   echo "CONFIG_STATIC_ASSERT=y" >> $config_host_mak
7207 fi
7208
7209 if test "$have_utmpx" = "yes" ; then
7210   echo "HAVE_UTMPX=y" >> $config_host_mak
7211 fi
7212 if test "$have_getrandom" = "yes" ; then
7213   echo "CONFIG_GETRANDOM=y" >> $config_host_mak
7214 fi
7215 if test "$ivshmem" = "yes" ; then
7216   echo "CONFIG_IVSHMEM=y" >> $config_host_mak
7217 fi
7218 if test "$capstone" != "no" ; then
7219   echo "CONFIG_CAPSTONE=y" >> $config_host_mak
7220 fi
7221 if test "$debug_mutex" = "yes" ; then
7222   echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
7223 fi
7224
7225 # Hold two types of flag:
7226 #   CONFIG_THREAD_SETNAME_BYTHREAD  - we've got a way of setting the name on
7227 #                                     a thread we have a handle to
7228 #   CONFIG_PTHREAD_SETNAME_NP_W_TID - A way of doing it on a particular
7229 #                                     platform
7230 if test "$pthread_setname_np_w_tid" = "yes" ; then
7231   echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
7232   echo "CONFIG_PTHREAD_SETNAME_NP_W_TID=y" >> $config_host_mak
7233 elif test "$pthread_setname_np_wo_tid" = "yes" ; then
7234   echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
7235   echo "CONFIG_PTHREAD_SETNAME_NP_WO_TID=y" >> $config_host_mak
7236 fi
7237
7238 if test "$vxhs" = "yes" ; then
7239   echo "CONFIG_VXHS=y" >> $config_host_mak
7240   echo "VXHS_LIBS=$vxhs_libs" >> $config_host_mak
7241 fi
7242
7243 if test "$libpmem" = "yes" ; then
7244   echo "CONFIG_LIBPMEM=y" >> $config_host_mak
7245 fi
7246
7247 if test "$bochs" = "yes" ; then
7248   echo "CONFIG_BOCHS=y" >> $config_host_mak
7249 fi
7250 if test "$cloop" = "yes" ; then
7251   echo "CONFIG_CLOOP=y" >> $config_host_mak
7252 fi
7253 if test "$dmg" = "yes" ; then
7254   echo "CONFIG_DMG=y" >> $config_host_mak
7255 fi
7256 if test "$qcow1" = "yes" ; then
7257   echo "CONFIG_QCOW1=y" >> $config_host_mak
7258 fi
7259 if test "$vdi" = "yes" ; then
7260   echo "CONFIG_VDI=y" >> $config_host_mak
7261 fi
7262 if test "$vvfat" = "yes" ; then
7263   echo "CONFIG_VVFAT=y" >> $config_host_mak
7264 fi
7265 if test "$qed" = "yes" ; then
7266   echo "CONFIG_QED=y" >> $config_host_mak
7267 fi
7268 if test "$parallels" = "yes" ; then
7269   echo "CONFIG_PARALLELS=y" >> $config_host_mak
7270 fi
7271 if test "$sheepdog" = "yes" ; then
7272   echo "CONFIG_SHEEPDOG=y" >> $config_host_mak
7273 fi
7274
7275 if test "$tcg_interpreter" = "yes"; then
7276   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
7277 elif test "$ARCH" = "sparc64" ; then
7278   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
7279 elif test "$ARCH" = "s390x" ; then
7280   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
7281 elif test "$ARCH" = "x86_64" || test "$ARCH" = "x32" ; then
7282   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
7283 elif test "$ARCH" = "ppc64" ; then
7284   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/ppc $QEMU_INCLUDES"
7285 elif test "$ARCH" = "riscv32" || test "$ARCH" = "riscv64" ; then
7286   QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/riscv $QEMU_INCLUDES"
7287 else
7288   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
7289 fi
7290 QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg $QEMU_INCLUDES"
7291
7292 echo "TOOLS=$tools" >> $config_host_mak
7293 echo "ROMS=$roms" >> $config_host_mak
7294 echo "MAKE=$make" >> $config_host_mak
7295 echo "INSTALL=$install" >> $config_host_mak
7296 echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
7297 echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
7298 echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
7299 echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
7300 echo "PYTHON=$python" >> $config_host_mak
7301 echo "PYTHON2=$python2" >> $config_host_mak
7302 echo "CC=$cc" >> $config_host_mak
7303 if $iasl -h > /dev/null 2>&1; then
7304   echo "IASL=$iasl" >> $config_host_mak
7305 fi
7306 echo "HOST_CC=$host_cc" >> $config_host_mak
7307 echo "CXX=$cxx" >> $config_host_mak
7308 echo "OBJCC=$objcc" >> $config_host_mak
7309 echo "AR=$ar" >> $config_host_mak
7310 echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
7311 echo "AS=$as" >> $config_host_mak
7312 echo "CCAS=$ccas" >> $config_host_mak
7313 echo "CPP=$cpp" >> $config_host_mak
7314 echo "OBJCOPY=$objcopy" >> $config_host_mak
7315 echo "LD=$ld" >> $config_host_mak
7316 echo "RANLIB=$ranlib" >> $config_host_mak
7317 echo "NM=$nm" >> $config_host_mak
7318 echo "PKG_CONFIG=$pkg_config_exe" >> $config_host_mak
7319 echo "WINDRES=$windres" >> $config_host_mak
7320 echo "CFLAGS=$CFLAGS" >> $config_host_mak
7321 echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
7322 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
7323 echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
7324 echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
7325 if test "$sparse" = "yes" ; then
7326   echo "CC           := REAL_CC=\"\$(CC)\" cgcc"       >> $config_host_mak
7327   echo "CPP          := REAL_CC=\"\$(CPP)\" cgcc"      >> $config_host_mak
7328   echo "CXX          := REAL_CC=\"\$(CXX)\" cgcc"      >> $config_host_mak
7329   echo "HOST_CC      := REAL_CC=\"\$(HOST_CC)\" cgcc"  >> $config_host_mak
7330   echo "QEMU_CFLAGS  += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
7331 fi
7332 echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
7333 echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
7334 echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak
7335 echo "LD_REL_FLAGS=$LD_REL_FLAGS" >> $config_host_mak
7336 echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak
7337 echo "LIBS+=$LIBS" >> $config_host_mak
7338 echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
7339 echo "PTHREAD_LIB=$PTHREAD_LIB" >> $config_host_mak
7340 echo "EXESUF=$EXESUF" >> $config_host_mak
7341 echo "DSOSUF=$DSOSUF" >> $config_host_mak
7342 echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
7343 echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
7344 echo "TASN1_LIBS=$tasn1_libs" >> $config_host_mak
7345 echo "TASN1_CFLAGS=$tasn1_cflags" >> $config_host_mak
7346 echo "POD2MAN=$POD2MAN" >> $config_host_mak
7347 if test "$gcov" = "yes" ; then
7348   echo "CONFIG_GCOV=y" >> $config_host_mak
7349   echo "GCOV=$gcov_tool" >> $config_host_mak
7350 fi
7351
7352 if test "$libudev" != "no"; then
7353     echo "CONFIG_LIBUDEV=y" >> $config_host_mak
7354     echo "LIBUDEV_LIBS=$libudev_libs" >> $config_host_mak
7355 fi
7356
7357 # use included Linux headers
7358 if test "$linux" = "yes" ; then
7359   mkdir -p linux-headers
7360   case "$cpu" in
7361   i386|x86_64|x32)
7362     linux_arch=x86
7363     ;;
7364   ppc|ppc64|ppc64le)
7365     linux_arch=powerpc
7366     ;;
7367   s390x)
7368     linux_arch=s390
7369     ;;
7370   aarch64)
7371     linux_arch=arm64
7372     ;;
7373   mips64)
7374     linux_arch=mips
7375     ;;
7376   *)
7377     # For most CPUs the kernel architecture name and QEMU CPU name match.
7378     linux_arch="$cpu"
7379     ;;
7380   esac
7381     # For non-KVM architectures we will not have asm headers
7382     if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
7383       symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm
7384     fi
7385 fi
7386
7387 for target in $target_list; do
7388 target_dir="$target"
7389 config_target_mak=$target_dir/config-target.mak
7390 target_name=$(echo $target | cut -d '-' -f 1)
7391 target_aligned_only="no"
7392 case "$target_name" in
7393   alpha|hppa|mips64el|mips64|mipsel|mips|mipsn32|mipsn32el|sh4|sh4eb|sparc|sparc64|sparc32plus|xtensa|xtensaeb)
7394   target_aligned_only="yes"
7395   ;;
7396 esac
7397 target_bigendian="no"
7398 case "$target_name" in
7399   armeb|aarch64_be|hppa|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or1k|ppc|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
7400   target_bigendian="yes"
7401   ;;
7402 esac
7403 target_softmmu="no"
7404 target_user_only="no"
7405 target_linux_user="no"
7406 target_bsd_user="no"
7407 case "$target" in
7408   ${target_name}-softmmu)
7409     target_softmmu="yes"
7410     ;;
7411   ${target_name}-linux-user)
7412     target_user_only="yes"
7413     target_linux_user="yes"
7414     ;;
7415   ${target_name}-bsd-user)
7416     target_user_only="yes"
7417     target_bsd_user="yes"
7418     ;;
7419   *)
7420     error_exit "Target '$target' not recognised"
7421     exit 1
7422     ;;
7423 esac
7424
7425 mkdir -p $target_dir
7426 echo "# Automatically generated by configure - do not modify" > $config_target_mak
7427
7428 bflt="no"
7429 mttcg="no"
7430 interp_prefix1=$(echo "$interp_prefix" | sed "s/%M/$target_name/g")
7431 gdb_xml_files=""
7432
7433 TARGET_ARCH="$target_name"
7434 TARGET_BASE_ARCH=""
7435 TARGET_ABI_DIR=""
7436
7437 case "$target_name" in
7438   i386)
7439     mttcg="yes"
7440         gdb_xml_files="i386-32bit.xml"
7441   ;;
7442   x86_64)
7443     TARGET_BASE_ARCH=i386
7444     mttcg="yes"
7445         gdb_xml_files="i386-64bit.xml"
7446   ;;
7447   alpha)
7448     mttcg="yes"
7449   ;;
7450   arm|armeb)
7451     TARGET_ARCH=arm
7452     bflt="yes"
7453     mttcg="yes"
7454     gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
7455   ;;
7456   aarch64|aarch64_be)
7457     TARGET_ARCH=aarch64
7458     TARGET_BASE_ARCH=arm
7459     bflt="yes"
7460     mttcg="yes"
7461     gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
7462   ;;
7463   cris)
7464   ;;
7465   hppa)
7466     mttcg="yes"
7467   ;;
7468   lm32)
7469   ;;
7470   m68k)
7471     bflt="yes"
7472     gdb_xml_files="cf-core.xml cf-fp.xml m68k-fp.xml"
7473   ;;
7474   microblaze|microblazeel)
7475     TARGET_ARCH=microblaze
7476     bflt="yes"
7477     echo "TARGET_ABI32=y" >> $config_target_mak
7478   ;;
7479   mips|mipsel)
7480     mttcg="yes"
7481     TARGET_ARCH=mips
7482     echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
7483   ;;
7484   mipsn32|mipsn32el)
7485     mttcg="yes"
7486     TARGET_ARCH=mips64
7487     TARGET_BASE_ARCH=mips
7488     echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
7489     echo "TARGET_ABI32=y" >> $config_target_mak
7490   ;;
7491   mips64|mips64el)
7492     mttcg="yes"
7493     TARGET_ARCH=mips64
7494     TARGET_BASE_ARCH=mips
7495     echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
7496   ;;
7497   moxie)
7498   ;;
7499   nios2)
7500   ;;
7501   or1k)
7502     TARGET_ARCH=openrisc
7503     TARGET_BASE_ARCH=openrisc
7504   ;;
7505   ppc)
7506     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
7507   ;;
7508   ppc64)
7509     TARGET_BASE_ARCH=ppc
7510     TARGET_ABI_DIR=ppc
7511     mttcg=yes
7512     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
7513   ;;
7514   ppc64le)
7515     TARGET_ARCH=ppc64
7516     TARGET_BASE_ARCH=ppc
7517     TARGET_ABI_DIR=ppc
7518     mttcg=yes
7519     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
7520   ;;
7521   ppc64abi32)
7522     TARGET_ARCH=ppc64
7523     TARGET_BASE_ARCH=ppc
7524     TARGET_ABI_DIR=ppc
7525     echo "TARGET_ABI32=y" >> $config_target_mak
7526     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
7527   ;;
7528   riscv32)
7529     TARGET_BASE_ARCH=riscv
7530     TARGET_ABI_DIR=riscv
7531     mttcg=yes
7532     gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml"
7533   ;;
7534   riscv64)
7535     TARGET_BASE_ARCH=riscv
7536     TARGET_ABI_DIR=riscv
7537     mttcg=yes
7538     gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml"
7539   ;;
7540   sh4|sh4eb)
7541     TARGET_ARCH=sh4
7542     bflt="yes"
7543   ;;
7544   sparc)
7545   ;;
7546   sparc64)
7547     TARGET_BASE_ARCH=sparc
7548   ;;
7549   sparc32plus)
7550     TARGET_ARCH=sparc64
7551     TARGET_BASE_ARCH=sparc
7552     TARGET_ABI_DIR=sparc
7553     echo "TARGET_ABI32=y" >> $config_target_mak
7554   ;;
7555   s390x)
7556     mttcg=yes
7557     gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml s390-vx.xml s390-cr.xml s390-virt.xml s390-gs.xml"
7558   ;;
7559   tilegx)
7560   ;;
7561   tricore)
7562   ;;
7563   unicore32)
7564   ;;
7565   xtensa|xtensaeb)
7566     TARGET_ARCH=xtensa
7567     bflt="yes"
7568     mttcg="yes"
7569   ;;
7570   *)
7571     error_exit "Unsupported target CPU"
7572   ;;
7573 esac
7574 # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
7575 if [ "$TARGET_BASE_ARCH" = "" ]; then
7576   TARGET_BASE_ARCH=$TARGET_ARCH
7577 fi
7578
7579 symlink "$source_path/Makefile.target" "$target_dir/Makefile"
7580
7581 upper() {
7582     echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
7583 }
7584
7585 target_arch_name="$(upper $TARGET_ARCH)"
7586 echo "TARGET_$target_arch_name=y" >> $config_target_mak
7587 echo "TARGET_NAME=$target_name" >> $config_target_mak
7588 echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
7589 if [ "$TARGET_ABI_DIR" = "" ]; then
7590   TARGET_ABI_DIR=$TARGET_ARCH
7591 fi
7592 echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
7593 if [ "$HOST_VARIANT_DIR" != "" ]; then
7594     echo "HOST_VARIANT_DIR=$HOST_VARIANT_DIR" >> $config_target_mak
7595 fi
7596
7597 if supported_xen_target $target; then
7598     echo "CONFIG_XEN=y" >> $config_target_mak
7599     echo "$target/config-devices.mak: CONFIG_XEN=y" >> $config_host_mak
7600     if test "$xen_pci_passthrough" = yes; then
7601         echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
7602     fi
7603 else
7604     echo "$target/config-devices.mak: CONFIG_XEN=n" >> $config_host_mak
7605 fi
7606 if supported_kvm_target $target; then
7607     echo "CONFIG_KVM=y" >> $config_target_mak
7608     echo "$target/config-devices.mak: CONFIG_KVM=y" >> $config_host_mak
7609 else
7610     echo "$target/config-devices.mak: CONFIG_KVM=n" >> $config_host_mak
7611 fi
7612 if supported_hax_target $target; then
7613     echo "CONFIG_HAX=y" >> $config_target_mak
7614 fi
7615 if supported_hvf_target $target; then
7616     echo "CONFIG_HVF=y" >> $config_target_mak
7617 fi
7618 if supported_whpx_target $target; then
7619     echo "CONFIG_WHPX=y" >> $config_target_mak
7620 fi
7621 if test "$target_aligned_only" = "yes" ; then
7622   echo "TARGET_ALIGNED_ONLY=y" >> $config_target_mak
7623 fi
7624 if test "$target_bigendian" = "yes" ; then
7625   echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
7626 fi
7627 if test "$target_softmmu" = "yes" ; then
7628   echo "CONFIG_SOFTMMU=y" >> $config_target_mak
7629   if test "$mttcg" = "yes" ; then
7630     echo "TARGET_SUPPORTS_MTTCG=y" >> $config_target_mak
7631   fi
7632 fi
7633 if test "$target_user_only" = "yes" ; then
7634   echo "CONFIG_USER_ONLY=y" >> $config_target_mak
7635   echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
7636 fi
7637 if test "$target_linux_user" = "yes" ; then
7638   echo "CONFIG_LINUX_USER=y" >> $config_target_mak
7639 fi
7640 list=""
7641 if test ! -z "$gdb_xml_files" ; then
7642   for x in $gdb_xml_files; do
7643     list="$list $source_path/gdb-xml/$x"
7644   done
7645   echo "TARGET_XML_FILES=$list" >> $config_target_mak
7646 fi
7647
7648 if test "$target_user_only" = "yes" && test "$bflt" = "yes"; then
7649   echo "TARGET_HAS_BFLT=y" >> $config_target_mak
7650 fi
7651 if test "$target_bsd_user" = "yes" ; then
7652   echo "CONFIG_BSD_USER=y" >> $config_target_mak
7653 fi
7654
7655
7656 # generate QEMU_CFLAGS/LDFLAGS for targets
7657
7658 cflags=""
7659 ldflags=""
7660
7661 disas_config() {
7662   echo "CONFIG_${1}_DIS=y" >> $config_target_mak
7663   echo "CONFIG_${1}_DIS=y" >> config-all-disas.mak
7664 }
7665
7666 for i in $ARCH $TARGET_BASE_ARCH ; do
7667   case "$i" in
7668   alpha)
7669     disas_config "ALPHA"
7670   ;;
7671   aarch64)
7672     if test -n "${cxx}"; then
7673       disas_config "ARM_A64"
7674     fi
7675   ;;
7676   arm)
7677     disas_config "ARM"
7678     if test -n "${cxx}"; then
7679       disas_config "ARM_A64"
7680     fi
7681   ;;
7682   cris)
7683     disas_config "CRIS"
7684   ;;
7685   hppa)
7686     disas_config "HPPA"
7687   ;;
7688   i386|x86_64|x32)
7689     disas_config "I386"
7690   ;;
7691   lm32)
7692     disas_config "LM32"
7693   ;;
7694   m68k)
7695     disas_config "M68K"
7696   ;;
7697   microblaze*)
7698     disas_config "MICROBLAZE"
7699   ;;
7700   mips*)
7701     disas_config "MIPS"
7702     if test -n "${cxx}"; then
7703       disas_config "NANOMIPS"
7704     fi
7705   ;;
7706   moxie*)
7707     disas_config "MOXIE"
7708   ;;
7709   nios2)
7710     disas_config "NIOS2"
7711   ;;
7712   or1k)
7713     disas_config "OPENRISC"
7714   ;;
7715   ppc*)
7716     disas_config "PPC"
7717   ;;
7718   riscv*)
7719     disas_config "RISCV"
7720   ;;
7721   s390*)
7722     disas_config "S390"
7723   ;;
7724   sh4)
7725     disas_config "SH4"
7726   ;;
7727   sparc*)
7728     disas_config "SPARC"
7729   ;;
7730   xtensa*)
7731     disas_config "XTENSA"
7732   ;;
7733   esac
7734 done
7735 if test "$tcg_interpreter" = "yes" ; then
7736   disas_config "TCI"
7737 fi
7738
7739 case "$ARCH" in
7740 alpha)
7741   # Ensure there's only a single GP
7742   cflags="-msmall-data $cflags"
7743 ;;
7744 esac
7745
7746 if test "$gprof" = "yes" ; then
7747   echo "TARGET_GPROF=y" >> $config_target_mak
7748   if test "$target_linux_user" = "yes" ; then
7749     cflags="-p $cflags"
7750     ldflags="-p $ldflags"
7751   fi
7752   if test "$target_softmmu" = "yes" ; then
7753     ldflags="-p $ldflags"
7754     echo "GPROF_CFLAGS=-p" >> $config_target_mak
7755   fi
7756 fi
7757
7758 if test "$target_linux_user" = "yes" || test "$target_bsd_user" = "yes" ; then
7759   ldflags="$ldflags $textseg_ldflags"
7760 fi
7761
7762 # Newer kernels on s390 check for an S390_PGSTE program header and
7763 # enable the pgste page table extensions in that case. This makes
7764 # the vm.allocate_pgste sysctl unnecessary. We enable this program
7765 # header if
7766 #  - we build on s390x
7767 #  - we build the system emulation for s390x (qemu-system-s390x)
7768 #  - KVM is enabled
7769 #  - the linker supports --s390-pgste
7770 if test "$TARGET_ARCH" = "s390x" && test "$target_softmmu" = "yes" && \
7771         test "$ARCH" = "s390x" && test "$kvm" = "yes"; then
7772     if ld_has --s390-pgste ; then
7773         ldflags="-Wl,--s390-pgste $ldflags"
7774     fi
7775 fi
7776
7777 echo "LDFLAGS+=$ldflags" >> $config_target_mak
7778 echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
7779
7780 done # for target in $targets
7781
7782 echo "PIXMAN_CFLAGS=$pixman_cflags" >> $config_host_mak
7783 echo "PIXMAN_LIBS=$pixman_libs" >> $config_host_mak
7784
7785 if [ "$fdt" = "git" ]; then
7786   echo "config-host.h: dtc/all" >> $config_host_mak
7787 fi
7788 if [ "$capstone" = "git" -o "$capstone" = "internal" ]; then
7789   echo "config-host.h: capstone/all" >> $config_host_mak
7790 fi
7791 if test -n "$LIBCAPSTONE"; then
7792   echo "LIBCAPSTONE=$LIBCAPSTONE" >> $config_host_mak
7793 fi
7794
7795 if test "$numa" = "yes"; then
7796   echo "CONFIG_NUMA=y" >> $config_host_mak
7797 fi
7798
7799 if test "$ccache_cpp2" = "yes"; then
7800   echo "export CCACHE_CPP2=y" >> $config_host_mak
7801 fi
7802
7803 # If we're using a separate build tree, set it up now.
7804 # DIRS are directories which we simply mkdir in the build tree;
7805 # LINKS are things to symlink back into the source tree
7806 # (these can be both files and directories).
7807 # Caution: do not add files or directories here using wildcards. This
7808 # will result in problems later if a new file matching the wildcard is
7809 # added to the source tree -- nothing will cause configure to be rerun
7810 # so the build tree will be missing the link back to the new file, and
7811 # tests might fail. Prefer to keep the relevant files in their own
7812 # directory and symlink the directory instead.
7813 DIRS="tests tests/tcg tests/tcg/lm32 tests/libqos tests/qapi-schema tests/qemu-iotests tests/vm"
7814 DIRS="$DIRS tests/fp tests/qgraph"
7815 DIRS="$DIRS docs docs/interop fsdev scsi"
7816 DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
7817 DIRS="$DIRS roms/seabios roms/vgabios"
7818 LINKS="Makefile"
7819 LINKS="$LINKS tests/tcg/lm32/Makefile po/Makefile"
7820 LINKS="$LINKS tests/tcg/Makefile.target tests/fp/Makefile"
7821 LINKS="$LINKS pc-bios/optionrom/Makefile pc-bios/keymaps"
7822 LINKS="$LINKS pc-bios/spapr-rtas/Makefile"
7823 LINKS="$LINKS pc-bios/s390-ccw/Makefile"
7824 LINKS="$LINKS roms/seabios/Makefile roms/vgabios/Makefile"
7825 LINKS="$LINKS pc-bios/qemu-icon.bmp"
7826 LINKS="$LINKS .gdbinit scripts" # scripts needed by relative path in .gdbinit
7827 LINKS="$LINKS tests/acceptance tests/data"
7828 LINKS="$LINKS tests/qemu-iotests/check"
7829 LINKS="$LINKS python"
7830 for bios_file in \
7831     $source_path/pc-bios/*.bin \
7832     $source_path/pc-bios/*.lid \
7833     $source_path/pc-bios/*.rom \
7834     $source_path/pc-bios/*.dtb \
7835     $source_path/pc-bios/*.img \
7836     $source_path/pc-bios/openbios-* \
7837     $source_path/pc-bios/u-boot.* \
7838     $source_path/pc-bios/edk2-*.fd.bz2 \
7839     $source_path/pc-bios/palcode-*
7840 do
7841     LINKS="$LINKS pc-bios/$(basename $bios_file)"
7842 done
7843 mkdir -p $DIRS
7844 for f in $LINKS ; do
7845     if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then
7846         symlink "$source_path/$f" "$f"
7847     fi
7848 done
7849
7850 (for i in $cross_cc_vars; do
7851   export $i
7852 done
7853 export target_list source_path
7854 $source_path/tests/tcg/configure.sh)
7855
7856 # temporary config to build submodules
7857 for rom in seabios vgabios ; do
7858     config_mak=roms/$rom/config.mak
7859     echo "# Automatically generated by configure - do not modify" > $config_mak
7860     echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
7861     echo "AS=$as" >> $config_mak
7862     echo "CCAS=$ccas" >> $config_mak
7863     echo "CC=$cc" >> $config_mak
7864     echo "BCC=bcc" >> $config_mak
7865     echo "CPP=$cpp" >> $config_mak
7866     echo "OBJCOPY=objcopy" >> $config_mak
7867     echo "IASL=$iasl" >> $config_mak
7868     echo "LD=$ld" >> $config_mak
7869     echo "RANLIB=$ranlib" >> $config_mak
7870 done
7871
7872 # set up qemu-iotests in this build directory
7873 iotests_common_env="tests/qemu-iotests/common.env"
7874
7875 echo "# Automatically generated by configure - do not modify" > "$iotests_common_env"
7876 echo >> "$iotests_common_env"
7877 echo "export PYTHON='$python'" >> "$iotests_common_env"
7878
7879 # Save the configure command line for later reuse.
7880 cat <<EOD >config.status
7881 #!/bin/sh
7882 # Generated by configure.
7883 # Run this file to recreate the current configuration.
7884 # Compiler output produced by configure, useful for debugging
7885 # configure, is in config.log if it exists.
7886 EOD
7887
7888 preserve_env() {
7889     envname=$1
7890
7891     eval envval=\$$envname
7892
7893     if test -n "$envval"
7894     then
7895         echo "$envname='$envval'" >> config.status
7896         echo "export $envname" >> config.status
7897     else
7898         echo "unset $envname" >> config.status
7899     fi
7900 }
7901
7902 # Preserve various env variables that influence what
7903 # features/build target configure will detect
7904 preserve_env AR
7905 preserve_env AS
7906 preserve_env CC
7907 preserve_env CPP
7908 preserve_env CXX
7909 preserve_env INSTALL
7910 preserve_env LD
7911 preserve_env LD_LIBRARY_PATH
7912 preserve_env LIBTOOL
7913 preserve_env MAKE
7914 preserve_env NM
7915 preserve_env OBJCOPY
7916 preserve_env PATH
7917 preserve_env PKG_CONFIG
7918 preserve_env PKG_CONFIG_LIBDIR
7919 preserve_env PKG_CONFIG_PATH
7920 preserve_env PYTHON
7921 preserve_env SDL2_CONFIG
7922 preserve_env SMBD
7923 preserve_env STRIP
7924 preserve_env WINDRES
7925
7926 printf "exec" >>config.status
7927 printf " '%s'" "$0" "$@" >>config.status
7928 echo ' "$@"' >>config.status
7929 chmod +x config.status
7930
7931 rm -r "$TMPDIR1"