hw/usb/dev-storage.c

   1 /*
   2  * USB Mass Storage Device emulation
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the LGPL.
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "qapi/error.h"
  12 #include "qemu/error-report.h"
  13 #include "qemu/module.h"
  14 #include "qemu/option.h"
  15 #include "qemu/config-file.h"
  16 #include "hw/usb.h"
  17 #include "desc.h"
  18 #include "hw/qdev-properties.h"
  19 #include "hw/scsi/scsi.h"
  20 #include "migration/vmstate.h"
  21 #include "sysemu/sysemu.h"
  22 #include "sysemu/block-backend.h"
  23 #include "qapi/visitor.h"
  24 #include "qemu/cutils.h"
  25
  26 //#define DEBUG_MSD
  27
  28 #ifdef DEBUG_MSD
  29 #define DPRINTF(fmt, ...) \
  30 do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
  31 #else
  32 #define DPRINTF(fmt, ...) do {} while(0)
  33 #endif
  34
  35 /* USB requests.  */
  36 #define MassStorageReset  0xff
  37 #define GetMaxLun         0xfe
  38
  39 enum USBMSDMode {
  40     USB_MSDM_CBW, /* Command Block.  */
  41     USB_MSDM_DATAOUT, /* Transfer data to device.  */
  42     USB_MSDM_DATAIN, /* Transfer data from device.  */
  43     USB_MSDM_CSW /* Command Status.  */
  44 };
  45
  46 struct usb_msd_csw {
  47     uint32_t sig;
  48     uint32_t tag;
  49     uint32_t residue;
  50     uint8_t status;
  51 };
  52
  53 typedef struct {
  54     USBDevice dev;
  55     enum USBMSDMode mode;
  56     uint32_t scsi_off;
  57     uint32_t scsi_len;
  58     uint32_t data_len;
  59     struct usb_msd_csw csw;
  60     SCSIRequest *req;
  61     SCSIBus bus;
  62     /* For async completion.  */
  63     USBPacket *packet;
  64     /* usb-storage only */
  65     BlockConf conf;
  66     uint32_t removable;
  67     SCSIDevice *scsi_dev;
  68 } MSDState;
  69
  70 #define TYPE_USB_STORAGE "usb-storage-dev"
  71 #define USB_STORAGE_DEV(obj) OBJECT_CHECK(MSDState, (obj), TYPE_USB_STORAGE)
  72
  73 struct usb_msd_cbw {
  74     uint32_t sig;
  75     uint32_t tag;
  76     uint32_t data_len;
  77     uint8_t flags;
  78     uint8_t lun;
  79     uint8_t cmd_len;
  80     uint8_t cmd[16];
  81 };
  82
  83 enum {
  84     STR_MANUFACTURER = 1,
  85     STR_PRODUCT,
  86     STR_SERIALNUMBER,
  87     STR_CONFIG_FULL,
  88     STR_CONFIG_HIGH,
  89     STR_CONFIG_SUPER,
  90 };
  91
  92 static const USBDescStrings desc_strings = {
  93     [STR_MANUFACTURER] = "QEMU",
  94     [STR_PRODUCT]      = "QEMU USB HARDDRIVE",
  95     [STR_SERIALNUMBER] = "1",
  96     [STR_CONFIG_FULL]  = "Full speed config (usb 1.1)",
  97     [STR_CONFIG_HIGH]  = "High speed config (usb 2.0)",
  98     [STR_CONFIG_SUPER] = "Super speed config (usb 3.0)",
  99 };
 100
 101 static const USBDescIface desc_iface_full = {
 102     .bInterfaceNumber              = 0,
 103     .bNumEndpoints                 = 2,
 104     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 105     .bInterfaceSubClass            = 0x06, /* SCSI */
 106     .bInterfaceProtocol            = 0x50, /* Bulk */
 107     .eps = (USBDescEndpoint[]) {
 108         {
 109             .bEndpointAddress      = USB_DIR_IN | 0x01,
 110             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 111             .wMaxPacketSize        = 64,
 112         },{
 113             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 114             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 115             .wMaxPacketSize        = 64,
 116         },
 117     }
 118 };
 119
 120 static const USBDescDevice desc_device_full = {
 121     .bcdUSB                        = 0x0200,
 122     .bMaxPacketSize0               = 8,
 123     .bNumConfigurations            = 1,
 124     .confs = (USBDescConfig[]) {
 125         {
 126             .bNumInterfaces        = 1,
 127             .bConfigurationValue   = 1,
 128             .iConfiguration        = STR_CONFIG_FULL,
 129             .bmAttributes          = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
 130             .nif = 1,
 131             .ifs = &desc_iface_full,
 132         },
 133     },
 134 };
 135
 136 static const USBDescIface desc_iface_high = {
 137     .bInterfaceNumber              = 0,
 138     .bNumEndpoints                 = 2,
 139     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 140     .bInterfaceSubClass            = 0x06, /* SCSI */
 141     .bInterfaceProtocol            = 0x50, /* Bulk */
 142     .eps = (USBDescEndpoint[]) {
 143         {
 144             .bEndpointAddress      = USB_DIR_IN | 0x01,
 145             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 146             .wMaxPacketSize        = 512,
 147         },{
 148             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 149             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 150             .wMaxPacketSize        = 512,
 151         },
 152     }
 153 };
 154
 155 static const USBDescDevice desc_device_high = {
 156     .bcdUSB                        = 0x0200,
 157     .bMaxPacketSize0               = 64,
 158     .bNumConfigurations            = 1,
 159     .confs = (USBDescConfig[]) {
 160         {
 161             .bNumInterfaces        = 1,
 162             .bConfigurationValue   = 1,
 163             .iConfiguration        = STR_CONFIG_HIGH,
 164             .bmAttributes          = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
 165             .nif = 1,
 166             .ifs = &desc_iface_high,
 167         },
 168     },
 169 };
 170
 171 static const USBDescIface desc_iface_super = {
 172     .bInterfaceNumber              = 0,
 173     .bNumEndpoints                 = 2,
 174     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 175     .bInterfaceSubClass            = 0x06, /* SCSI */
 176     .bInterfaceProtocol            = 0x50, /* Bulk */
 177     .eps = (USBDescEndpoint[]) {
 178         {
 179             .bEndpointAddress      = USB_DIR_IN | 0x01,
 180             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 181             .wMaxPacketSize        = 1024,
 182             .bMaxBurst             = 15,
 183         },{
 184             .bEndpointAddress      = USB_DIR_OUT | 0x02,
 185             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 186             .wMaxPacketSize        = 1024,
 187             .bMaxBurst             = 15,
 188         },
 189     }
 190 };
 191
 192 static const USBDescDevice desc_device_super = {
 193     .bcdUSB                        = 0x0300,
 194     .bMaxPacketSize0               = 9,
 195     .bNumConfigurations            = 1,
 196     .confs = (USBDescConfig[]) {
 197         {
 198             .bNumInterfaces        = 1,
 199             .bConfigurationValue   = 1,
 200             .iConfiguration        = STR_CONFIG_SUPER,
 201             .bmAttributes          = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
 202             .nif = 1,
 203             .ifs = &desc_iface_super,
 204         },
 205     },
 206 };
 207
 208 static const USBDesc desc = {
 209     .id = {
 210         .idVendor          = 0x46f4, /* CRC16() of "QEMU" */
 211         .idProduct         = 0x0001,
 212         .bcdDevice         = 0,
 213         .iManufacturer     = STR_MANUFACTURER,
 214         .iProduct          = STR_PRODUCT,
 215         .iSerialNumber     = STR_SERIALNUMBER,
 216     },
 217     .full  = &desc_device_full,
 218     .high  = &desc_device_high,
 219     .super = &desc_device_super,
 220     .str   = desc_strings,
 221 };
 222
 223 static void usb_msd_copy_data(MSDState *s, USBPacket *p)
 224 {
 225     uint32_t len;
 226     len = p->iov.size - p->actual_length;
 227     if (len > s->scsi_len)
 228         len = s->scsi_len;
 229     usb_packet_copy(p, scsi_req_get_buf(s->req) + s->scsi_off, len);
 230     s->scsi_len -= len;
 231     s->scsi_off += len;
 232     s->data_len -= len;
 233     if (s->scsi_len == 0 || s->data_len == 0) {
 234         scsi_req_continue(s->req);
 235     }
 236 }
 237
 238 static void usb_msd_send_status(MSDState *s, USBPacket *p)
 239 {
 240     int len;
 241
 242     DPRINTF("Command status %d tag 0x%x, len %zd\n",
 243             s->csw.status, le32_to_cpu(s->csw.tag), p->iov.size);
 244
 245     assert(s->csw.sig == cpu_to_le32(0x53425355));
 246     len = MIN(sizeof(s->csw), p->iov.size);
 247     usb_packet_copy(p, &s->csw, len);
 248     memset(&s->csw, 0, sizeof(s->csw));
 249 }
 250
 251 static void usb_msd_packet_complete(MSDState *s)
 252 {
 253     USBPacket *p = s->packet;
 254
 255     /* Set s->packet to NULL before calling usb_packet_complete
 256        because another request may be issued before
 257        usb_packet_complete returns.  */
 258     DPRINTF("Packet complete %p\n", p);
 259     s->packet = NULL;
 260     usb_packet_complete(&s->dev, p);
 261 }
 262
 263 static void usb_msd_transfer_data(SCSIRequest *req, uint32_t len)
 264 {
 265     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 266     USBPacket *p = s->packet;
 267
 268     assert((s->mode == USB_MSDM_DATAOUT) == (req->cmd.mode == SCSI_XFER_TO_DEV));
 269     s->scsi_len = len;
 270     s->scsi_off = 0;
 271     if (p) {
 272         usb_msd_copy_data(s, p);
 273         p = s->packet;
 274         if (p && p->actual_length == p->iov.size) {
 275             p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
 276             usb_msd_packet_complete(s);
 277         }
 278     }
 279 }
 280
 281 static void usb_msd_command_complete(SCSIRequest *req, uint32_t status, size_t resid)
 282 {
 283     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 284     USBPacket *p = s->packet;
 285
 286     DPRINTF("Command complete %d tag 0x%x\n", status, req->tag);
 287
 288     s->csw.sig = cpu_to_le32(0x53425355);
 289     s->csw.tag = cpu_to_le32(req->tag);
 290     s->csw.residue = cpu_to_le32(s->data_len);
 291     s->csw.status = status != 0;
 292
 293     if (s->packet) {
 294         if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
 295             /* A deferred packet with no write data remaining must be
 296                the status read packet.  */
 297             usb_msd_send_status(s, p);
 298             s->mode = USB_MSDM_CBW;
 299         } else if (s->mode == USB_MSDM_CSW) {
 300             usb_msd_send_status(s, p);
 301             s->mode = USB_MSDM_CBW;
 302         } else {
 303             if (s->data_len) {
 304                 int len = (p->iov.size - p->actual_length);
 305                 usb_packet_skip(p, len);
 306                 s->data_len -= len;
 307             }
 308             if (s->data_len == 0) {
 309                 s->mode = USB_MSDM_CSW;
 310             }
 311         }
 312         p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
 313         usb_msd_packet_complete(s);
 314     } else if (s->data_len == 0) {
 315         s->mode = USB_MSDM_CSW;
 316     }
 317     scsi_req_unref(req);
 318     s->req = NULL;
 319 }
 320
 321 static void usb_msd_request_cancelled(SCSIRequest *req)
 322 {
 323     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 324
 325     if (req == s->req) {
 326         scsi_req_unref(s->req);
 327         s->req = NULL;
 328         s->scsi_len = 0;
 329     }
 330 }
 331
 332 static void usb_msd_handle_reset(USBDevice *dev)
 333 {
 334     MSDState *s = (MSDState *)dev;
 335
 336     DPRINTF("Reset\n");
 337     if (s->req) {
 338         scsi_req_cancel(s->req);
 339     }
 340     assert(s->req == NULL);
 341
 342     if (s->packet) {
 343         s->packet->status = USB_RET_STALL;
 344         usb_msd_packet_complete(s);
 345     }
 346
 347     s->mode = USB_MSDM_CBW;
 348 }
 349
 350 static void usb_msd_handle_control(USBDevice *dev, USBPacket *p,
 351                int request, int value, int index, int length, uint8_t *data)
 352 {
 353     MSDState *s = (MSDState *)dev;
 354     SCSIDevice *scsi_dev;
 355     int ret, maxlun;
 356
 357     ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
 358     if (ret >= 0) {
 359         return;
 360     }
 361
 362     switch (request) {
 363     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 364         break;
 365         /* Class specific requests.  */
 366     case ClassInterfaceOutRequest | MassStorageReset:
 367         /* Reset state ready for the next CBW.  */
 368         s->mode = USB_MSDM_CBW;
 369         break;
 370     case ClassInterfaceRequest | GetMaxLun:
 371         maxlun = 0;
 372         for (;;) {
 373             scsi_dev = scsi_device_find(&s->bus, 0, 0, maxlun+1);
 374             if (scsi_dev == NULL) {
 375                 break;
 376             }
 377             if (scsi_dev->lun != maxlun+1) {
 378                 break;
 379             }
 380             maxlun++;
 381         }
 382         DPRINTF("MaxLun %d\n", maxlun);
 383         data[0] = maxlun;
 384         p->actual_length = 1;
 385         break;
 386     default:
 387         p->status = USB_RET_STALL;
 388         break;
 389     }
 390 }
 391
 392 static void usb_msd_cancel_io(USBDevice *dev, USBPacket *p)
 393 {
 394     MSDState *s = USB_STORAGE_DEV(dev);
 395
 396     assert(s->packet == p);
 397     s->packet = NULL;
 398
 399     if (s->req) {
 400         scsi_req_cancel(s->req);
 401     }
 402 }
 403
 404 static void usb_msd_handle_data(USBDevice *dev, USBPacket *p)
 405 {
 406     MSDState *s = (MSDState *)dev;
 407     uint32_t tag;
 408     struct usb_msd_cbw cbw;
 409     uint8_t devep = p->ep->nr;
 410     SCSIDevice *scsi_dev;
 411     uint32_t len;
 412
 413     switch (p->pid) {
 414     case USB_TOKEN_OUT:
 415         if (devep != 2)
 416             goto fail;
 417
 418         switch (s->mode) {
 419         case USB_MSDM_CBW:
 420             if (p->iov.size != 31) {
 421                 error_report("usb-msd: Bad CBW size");
 422                 goto fail;
 423             }
 424             usb_packet_copy(p, &cbw, 31);
 425             if (le32_to_cpu(cbw.sig) != 0x43425355) {
 426                 error_report("usb-msd: Bad signature %08x",
 427                              le32_to_cpu(cbw.sig));
 428                 goto fail;
 429             }
 430             DPRINTF("Command on LUN %d\n", cbw.lun);
 431             scsi_dev = scsi_device_find(&s->bus, 0, 0, cbw.lun);
 432             if (scsi_dev == NULL) {
 433                 error_report("usb-msd: Bad LUN %d", cbw.lun);
 434                 goto fail;
 435             }
 436             tag = le32_to_cpu(cbw.tag);
 437             s->data_len = le32_to_cpu(cbw.data_len);
 438             if (s->data_len == 0) {
 439                 s->mode = USB_MSDM_CSW;
 440             } else if (cbw.flags & 0x80) {
 441                 s->mode = USB_MSDM_DATAIN;
 442             } else {
 443                 s->mode = USB_MSDM_DATAOUT;
 444             }
 445             DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
 446                     tag, cbw.flags, cbw.cmd_len, s->data_len);
 447             assert(le32_to_cpu(s->csw.residue) == 0);
 448             s->scsi_len = 0;
 449             s->req = scsi_req_new(scsi_dev, tag, cbw.lun, cbw.cmd, NULL);
 450 #ifdef DEBUG_MSD
 451             scsi_req_print(s->req);
 452 #endif
 453             len = scsi_req_enqueue(s->req);
 454             if (len) {
 455                 scsi_req_continue(s->req);
 456             }
 457             break;
 458
 459         case USB_MSDM_DATAOUT:
 460             DPRINTF("Data out %zd/%d\n", p->iov.size, s->data_len);
 461             if (p->iov.size > s->data_len) {
 462                 goto fail;
 463             }
 464
 465             if (s->scsi_len) {
 466                 usb_msd_copy_data(s, p);
 467             }
 468             if (le32_to_cpu(s->csw.residue)) {
 469                 int len = p->iov.size - p->actual_length;
 470                 if (len) {
 471                     usb_packet_skip(p, len);
 472                     s->data_len -= len;
 473                     if (s->data_len == 0) {
 474                         s->mode = USB_MSDM_CSW;
 475                     }
 476                 }
 477             }
 478             if (p->actual_length < p->iov.size) {
 479                 DPRINTF("Deferring packet %p [wait data-out]\n", p);
 480                 s->packet = p;
 481                 p->status = USB_RET_ASYNC;
 482             }
 483             break;
 484
 485         default:
 486             DPRINTF("Unexpected write (len %zd)\n", p->iov.size);
 487             goto fail;
 488         }
 489         break;
 490
 491     case USB_TOKEN_IN:
 492         if (devep != 1)
 493             goto fail;
 494
 495         switch (s->mode) {
 496         case USB_MSDM_DATAOUT:
 497             if (s->data_len != 0 || p->iov.size < 13) {
 498                 goto fail;
 499             }
 500             /* Waiting for SCSI write to complete.  */
 501             s->packet = p;
 502             p->status = USB_RET_ASYNC;
 503             break;
 504
 505         case USB_MSDM_CSW:
 506             if (p->iov.size < 13) {
 507                 goto fail;
 508             }
 509
 510             if (s->req) {
 511                 /* still in flight */
 512                 DPRINTF("Deferring packet %p [wait status]\n", p);
 513                 s->packet = p;
 514                 p->status = USB_RET_ASYNC;
 515             } else {
 516                 usb_msd_send_status(s, p);
 517                 s->mode = USB_MSDM_CBW;
 518             }
 519             break;
 520
 521         case USB_MSDM_DATAIN:
 522             DPRINTF("Data in %zd/%d, scsi_len %d\n",
 523                     p->iov.size, s->data_len, s->scsi_len);
 524             if (s->scsi_len) {
 525                 usb_msd_copy_data(s, p);
 526             }
 527             if (le32_to_cpu(s->csw.residue)) {
 528                 int len = p->iov.size - p->actual_length;
 529                 if (len) {
 530                     usb_packet_skip(p, len);
 531                     s->data_len -= len;
 532                     if (s->data_len == 0) {
 533                         s->mode = USB_MSDM_CSW;
 534                     }
 535                 }
 536             }
 537             if (p->actual_length < p->iov.size) {
 538                 DPRINTF("Deferring packet %p [wait data-in]\n", p);
 539                 s->packet = p;
 540                 p->status = USB_RET_ASYNC;
 541             }
 542             break;
 543
 544         default:
 545             DPRINTF("Unexpected read (len %zd)\n", p->iov.size);
 546             goto fail;
 547         }
 548         break;
 549
 550     default:
 551         DPRINTF("Bad token\n");
 552     fail:
 553         p->status = USB_RET_STALL;
 554         break;
 555     }
 556 }
 557
 558 static void *usb_msd_load_request(QEMUFile *f, SCSIRequest *req)
 559 {
 560     MSDState *s = DO_UPCAST(MSDState, dev.qdev, req->bus->qbus.parent);
 561
 562     /* nothing to load, just store req in our state struct */
 563     assert(s->req == NULL);
 564     scsi_req_ref(req);
 565     s->req = req;
 566     return NULL;
 567 }
 568
 569 static const struct SCSIBusInfo usb_msd_scsi_info_storage = {
 570     .tcq = false,
 571     .max_target = 0,
 572     .max_lun = 0,
 573
 574     .transfer_data = usb_msd_transfer_data,
 575     .complete = usb_msd_command_complete,
 576     .cancel = usb_msd_request_cancelled,
 577     .load_request = usb_msd_load_request,
 578 };
 579
 580 static const struct SCSIBusInfo usb_msd_scsi_info_bot = {
 581     .tcq = false,
 582     .max_target = 0,
 583     .max_lun = 15,
 584
 585     .transfer_data = usb_msd_transfer_data,
 586     .complete = usb_msd_command_complete,
 587     .cancel = usb_msd_request_cancelled,
 588     .load_request = usb_msd_load_request,
 589 };
 590
 591 static void usb_msd_storage_realize(USBDevice *dev, Error **errp)
 592 {
 593     MSDState *s = USB_STORAGE_DEV(dev);
 594     BlockBackend *blk = s->conf.blk;
 595     SCSIDevice *scsi_dev;
 596
 597     if (!blk) {
 598         error_setg(errp, "drive property not set");
 599         return;
 600     }
 601
 602     blkconf_blocksizes(&s->conf);
 603     if (!blkconf_apply_backend_options(&s->conf, blk_is_read_only(blk), true,
 604                                        errp)) {
 605         return;
 606     }
 607
 608     /*
 609      * Hack alert: this pretends to be a block device, but it's really
 610      * a SCSI bus that can serve only a single device, which it
 611      * creates automatically.  But first it needs to detach from its
 612      * blockdev, or else scsi_bus_legacy_add_drive() dies when it
 613      * attaches again. We also need to take another reference so that
 614      * blk_detach_dev() doesn't free blk while we still need it.
 615      *
 616      * The hack is probably a bad idea.
 617      */
 618     blk_ref(blk);
 619     blk_detach_dev(blk, DEVICE(s));
 620     s->conf.blk = NULL;
 621
 622     usb_desc_create_serial(dev);
 623     usb_desc_init(dev);
 624     scsi_bus_new(&s->bus, sizeof(s->bus), DEVICE(dev),
 625                  &usb_msd_scsi_info_storage, NULL);
 626     scsi_dev = scsi_bus_legacy_add_drive(&s->bus, blk, 0, !!s->removable,
 627                                          s->conf.bootindex, s->conf.share_rw,
 628                                          s->conf.rerror, s->conf.werror,
 629                                          dev->serial,
 630                                          errp);
 631     blk_unref(blk);
 632     if (!scsi_dev) {
 633         return;
 634     }
 635     usb_msd_handle_reset(dev);
 636     s->scsi_dev = scsi_dev;
 637 }
 638
 639 static void usb_msd_bot_realize(USBDevice *dev, Error **errp)
 640 {
 641     MSDState *s = USB_STORAGE_DEV(dev);
 642     DeviceState *d = DEVICE(dev);
 643
 644     usb_desc_create_serial(dev);
 645     usb_desc_init(dev);
 646     if (d->hotplugged) {
 647         s->dev.auto_attach = 0;
 648     }
 649
 650     scsi_bus_new(&s->bus, sizeof(s->bus), DEVICE(dev),
 651                  &usb_msd_scsi_info_bot, NULL);
 652     usb_msd_handle_reset(dev);
 653 }
 654
 655 static const VMStateDescription vmstate_usb_msd = {
 656     .name = "usb-storage",
 657     .version_id = 1,
 658     .minimum_version_id = 1,
 659     .fields = (VMStateField[]) {
 660         VMSTATE_USB_DEVICE(dev, MSDState),
 661         VMSTATE_UINT32(mode, MSDState),
 662         VMSTATE_UINT32(scsi_len, MSDState),
 663         VMSTATE_UINT32(scsi_off, MSDState),
 664         VMSTATE_UINT32(data_len, MSDState),
 665         VMSTATE_UINT32(csw.sig, MSDState),
 666         VMSTATE_UINT32(csw.tag, MSDState),
 667         VMSTATE_UINT32(csw.residue, MSDState),
 668         VMSTATE_UINT8(csw.status, MSDState),
 669         VMSTATE_END_OF_LIST()
 670     }
 671 };
 672
 673 static Property msd_properties[] = {
 674     DEFINE_BLOCK_PROPERTIES(MSDState, conf),
 675     DEFINE_BLOCK_ERROR_PROPERTIES(MSDState, conf),
 676     DEFINE_PROP_BIT("removable", MSDState, removable, 0, false),
 677     DEFINE_PROP_END_OF_LIST(),
 678 };
 679
 680 static void usb_msd_class_initfn_common(ObjectClass *klass, void *data)
 681 {
 682     DeviceClass *dc = DEVICE_CLASS(klass);
 683     USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
 684
 685     uc->product_desc   = "QEMU USB MSD";
 686     uc->usb_desc       = &desc;
 687     uc->cancel_packet  = usb_msd_cancel_io;
 688     uc->handle_attach  = usb_desc_attach;
 689     uc->handle_reset   = usb_msd_handle_reset;
 690     uc->handle_control = usb_msd_handle_control;
 691     uc->handle_data    = usb_msd_handle_data;
 692     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 693     dc->fw_name = "storage";
 694     dc->vmsd = &vmstate_usb_msd;
 695 }
 696
 697 static void usb_msd_class_storage_initfn(ObjectClass *klass, void *data)
 698 {
 699     DeviceClass *dc = DEVICE_CLASS(klass);
 700     USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
 701
 702     uc->realize = usb_msd_storage_realize;
 703     device_class_set_props(dc, msd_properties);
 704 }
 705
 706 static void usb_msd_get_bootindex(Object *obj, Visitor *v, const char *name,
 707                                   void *opaque, Error **errp)
 708 {
 709     USBDevice *dev = USB_DEVICE(obj);
 710     MSDState *s = USB_STORAGE_DEV(dev);
 711
 712     visit_type_int32(v, name, &s->conf.bootindex, errp);
 713 }
 714
 715 static void usb_msd_set_bootindex(Object *obj, Visitor *v, const char *name,
 716                                   void *opaque, Error **errp)
 717 {
 718     USBDevice *dev = USB_DEVICE(obj);
 719     MSDState *s = USB_STORAGE_DEV(dev);
 720     int32_t boot_index;
 721     Error *local_err = NULL;
 722
 723     visit_type_int32(v, name, &boot_index, &local_err);
 724     if (local_err) {
 725         goto out;
 726     }
 727     /* check whether bootindex is present in fw_boot_order list  */
 728     check_boot_index(boot_index, &local_err);
 729     if (local_err) {
 730         goto out;
 731     }
 732     /* change bootindex to a new one */
 733     s->conf.bootindex = boot_index;
 734
 735     if (s->scsi_dev) {
 736         object_property_set_int(OBJECT(s->scsi_dev), boot_index, "bootindex",
 737                                 &error_abort);
 738     }
 739
 740 out:
 741     error_propagate(errp, local_err);
 742 }
 743
 744 static const TypeInfo usb_storage_dev_type_info = {
 745     .name = TYPE_USB_STORAGE,
 746     .parent = TYPE_USB_DEVICE,
 747     .instance_size = sizeof(MSDState),
 748     .abstract = true,
 749     .class_init = usb_msd_class_initfn_common,
 750 };
 751
 752 static void usb_msd_instance_init(Object *obj)
 753 {
 754     object_property_add(obj, "bootindex", "int32",
 755                         usb_msd_get_bootindex,
 756                         usb_msd_set_bootindex, NULL, NULL);
 757     object_property_set_int(obj, -1, "bootindex", NULL);
 758 }
 759
 760 static void usb_msd_class_bot_initfn(ObjectClass *klass, void *data)
 761 {
 762     USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
 763
 764     uc->realize = usb_msd_bot_realize;
 765     uc->attached_settable = true;
 766 }
 767
 768 static const TypeInfo msd_info = {
 769     .name          = "usb-storage",
 770     .parent        = TYPE_USB_STORAGE,
 771     .class_init    = usb_msd_class_storage_initfn,
 772     .instance_init = usb_msd_instance_init,
 773 };
 774
 775 static const TypeInfo bot_info = {
 776     .name          = "usb-bot",
 777     .parent        = TYPE_USB_STORAGE,
 778     .class_init    = usb_msd_class_bot_initfn,
 779 };
 780
 781 static void usb_msd_register_types(void)
 782 {
 783     type_register_static(&usb_storage_dev_type_info);
 784     type_register_static(&msd_info);
 785     type_register_static(&bot_info);
 786 }
 787
 788 type_init(usb_msd_register_types)