]> git.proxmox.com Git - mirror_qemu.git/blob - hw/usb/hcd-uhci.c
projects / mirror_qemu.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
[mirror_qemu.git] / hw / usb / hcd-uhci.c
1 /*
2 * USB UHCI controller emulation
3 *
4 * Copyright (c) 2005 Fabrice Bellard
5 *
6 * Copyright (c) 2008 Max Krasnyansky
7 * Magor rewrite of the UHCI data structures parser and frame processor
8 * Support for fully async operation and multiple outstanding transactions
9 *
10 * Permission is hereby granted, free of charge, to any person obtaining a copy
11 * of this software and associated documentation files (the "Software"), to deal
12 * in the Software without restriction, including without limitation the rights
13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
14 * copies of the Software, and to permit persons to whom the Software is
15 * furnished to do so, subject to the following conditions:
16 *
17 * The above copyright notice and this permission notice shall be included in
18 * all copies or substantial portions of the Software.
19 *
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
26 * THE SOFTWARE.
27 */
28 #include "qemu/osdep.h"
29 #include "hw/hw.h"
30 #include "hw/usb.h"
31 #include "hw/usb/uhci-regs.h"
32 #include "hw/pci/pci.h"
33 #include "qapi/error.h"
34 #include "qemu/timer.h"
35 #include "qemu/iov.h"
36 #include "sysemu/dma.h"
37 #include "trace.h"
38 #include "qemu/main-loop.h"
39
40 #define FRAME_TIMER_FREQ 1000
41
42 #define FRAME_MAX_LOOPS 256
43
44 /* Must be large enough to handle 10 frame delay for initial isoc requests */
45 #define QH_VALID 32
46
47 #define MAX_FRAMES_PER_TICK (QH_VALID / 2)
48
49 #define NB_PORTS 2
50
51 enum {
52 TD_RESULT_STOP_FRAME = 10,
53 TD_RESULT_COMPLETE,
54 TD_RESULT_NEXT_QH,
55 TD_RESULT_ASYNC_START,
56 TD_RESULT_ASYNC_CONT,
57 };
58
59 typedef struct UHCIState UHCIState;
60 typedef struct UHCIAsync UHCIAsync;
61 typedef struct UHCIQueue UHCIQueue;
62 typedef struct UHCIInfo UHCIInfo;
63 typedef struct UHCIPCIDeviceClass UHCIPCIDeviceClass;
64
65 struct UHCIInfo {
66 const char *name;
67 uint16_t vendor_id;
68 uint16_t device_id;
69 uint8_t revision;
70 uint8_t irq_pin;
71 void (*realize)(PCIDevice *dev, Error **errp);
72 bool unplug;
73 };
74
75 struct UHCIPCIDeviceClass {
76 PCIDeviceClass parent_class;
77 UHCIInfo info;
78 };
79
80 /*
81 * Pending async transaction.
82 * 'packet' must be the first field because completion
83 * handler does "(UHCIAsync *) pkt" cast.
84 */
85
86 struct UHCIAsync {
87 USBPacket packet;
88 uint8_t static_buf[64]; /* 64 bytes is enough, except for isoc packets */
89 uint8_t *buf;
90 UHCIQueue *queue;
91 QTAILQ_ENTRY(UHCIAsync) next;
92 uint32_t td_addr;
93 uint8_t done;
94 };
95
96 struct UHCIQueue {
97 uint32_t qh_addr;
98 uint32_t token;
99 UHCIState *uhci;
100 USBEndpoint *ep;
101 QTAILQ_ENTRY(UHCIQueue) next;
102 QTAILQ_HEAD(asyncs_head, UHCIAsync) asyncs;
103 int8_t valid;
104 };
105
106 typedef struct UHCIPort {
107 USBPort port;
108 uint16_t ctrl;
109 } UHCIPort;
110
111 struct UHCIState {
112 PCIDevice dev;
113 MemoryRegion io_bar;
114 USBBus bus; /* Note unused when we're a companion controller */
115 uint16_t cmd; /* cmd register */
116 uint16_t status;
117 uint16_t intr; /* interrupt enable register */
118 uint16_t frnum; /* frame number */
119 uint32_t fl_base_addr; /* frame list base address */
120 uint8_t sof_timing;
121 uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */
122 int64_t expire_time;
123 QEMUTimer *frame_timer;
124 QEMUBH *bh;
125 uint32_t frame_bytes;
126 uint32_t frame_bandwidth;
127 bool completions_only;
128 UHCIPort ports[NB_PORTS];
129
130 /* Interrupts that should be raised at the end of the current frame. */
131 uint32_t pending_int_mask;
132
133 /* Active packets */
134 QTAILQ_HEAD(, UHCIQueue) queues;
135 uint8_t num_ports_vmstate;
136
137 /* Properties */
138 char *masterbus;
139 uint32_t firstport;
140 uint32_t maxframes;
141 };
142
143 typedef struct UHCI_TD {
144 uint32_t link;
145 uint32_t ctrl; /* see TD_CTRL_xxx */
146 uint32_t token;
147 uint32_t buffer;
148 } UHCI_TD;
149
150 typedef struct UHCI_QH {
151 uint32_t link;
152 uint32_t el_link;
153 } UHCI_QH;
154
155 static void uhci_async_cancel(UHCIAsync *async);
156 static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td);
157 static void uhci_resume(void *opaque);
158
159 #define TYPE_UHCI "pci-uhci-usb"
160 #define UHCI(obj) OBJECT_CHECK(UHCIState, (obj), TYPE_UHCI)
161
162 static inline int32_t uhci_queue_token(UHCI_TD *td)
163 {
164 if ((td->token & (0xf << 15)) == 0) {
165 /* ctrl ep, cover ep and dev, not pid! */
166 return td->token & 0x7ff00;
167 } else {
168 /* covers ep, dev, pid -> identifies the endpoint */
169 return td->token & 0x7ffff;
170 }
171 }
172
173 static UHCIQueue *uhci_queue_new(UHCIState *s, uint32_t qh_addr, UHCI_TD *td,
174 USBEndpoint *ep)
175 {
176 UHCIQueue *queue;
177
178 queue = g_new0(UHCIQueue, 1);
179 queue->uhci = s;
180 queue->qh_addr = qh_addr;
181 queue->token = uhci_queue_token(td);
182 queue->ep = ep;
183 QTAILQ_INIT(&queue->asyncs);
184 QTAILQ_INSERT_HEAD(&s->queues, queue, next);
185 queue->valid = QH_VALID;
186 trace_usb_uhci_queue_add(queue->token);
187 return queue;
188 }
189
190 static void uhci_queue_free(UHCIQueue *queue, const char *reason)
191 {
192 UHCIState *s = queue->uhci;
193 UHCIAsync *async;
194
195 while (!QTAILQ_EMPTY(&queue->asyncs)) {
196 async = QTAILQ_FIRST(&queue->asyncs);
197 uhci_async_cancel(async);
198 }
199 usb_device_ep_stopped(queue->ep->dev, queue->ep);
200
201 trace_usb_uhci_queue_del(queue->token, reason);
202 QTAILQ_REMOVE(&s->queues, queue, next);
203 g_free(queue);
204 }
205
206 static UHCIQueue *uhci_queue_find(UHCIState *s, UHCI_TD *td)
207 {
208 uint32_t token = uhci_queue_token(td);
209 UHCIQueue *queue;
210
211 QTAILQ_FOREACH(queue, &s->queues, next) {
212 if (queue->token == token) {
213 return queue;
214 }
215 }
216 return NULL;
217 }
218
219 static bool uhci_queue_verify(UHCIQueue *queue, uint32_t qh_addr, UHCI_TD *td,
220 uint32_t td_addr, bool queuing)
221 {
222 UHCIAsync *first = QTAILQ_FIRST(&queue->asyncs);
223 uint32_t queue_token_addr = (queue->token >> 8) & 0x7f;
224
225 return queue->qh_addr == qh_addr &&
226 queue->token == uhci_queue_token(td) &&
227 queue_token_addr == queue->ep->dev->addr &&
228 (queuing || !(td->ctrl & TD_CTRL_ACTIVE) || first == NULL ||
229 first->td_addr == td_addr);
230 }
231
232 static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t td_addr)
233 {
234 UHCIAsync *async = g_new0(UHCIAsync, 1);
235
236 async->queue = queue;
237 async->td_addr = td_addr;
238 usb_packet_init(&async->packet);
239 trace_usb_uhci_packet_add(async->queue->token, async->td_addr);
240
241 return async;
242 }
243
244 static void uhci_async_free(UHCIAsync *async)
245 {
246 trace_usb_uhci_packet_del(async->queue->token, async->td_addr);
247 usb_packet_cleanup(&async->packet);
248 if (async->buf != async->static_buf) {
249 g_free(async->buf);
250 }
251 g_free(async);
252 }
253
254 static void uhci_async_link(UHCIAsync *async)
255 {
256 UHCIQueue *queue = async->queue;
257 QTAILQ_INSERT_TAIL(&queue->asyncs, async, next);
258 trace_usb_uhci_packet_link_async(async->queue->token, async->td_addr);
259 }
260
261 static void uhci_async_unlink(UHCIAsync *async)
262 {
263 UHCIQueue *queue = async->queue;
264 QTAILQ_REMOVE(&queue->asyncs, async, next);
265 trace_usb_uhci_packet_unlink_async(async->queue->token, async->td_addr);
266 }
267
268 static void uhci_async_cancel(UHCIAsync *async)
269 {
270 uhci_async_unlink(async);
271 trace_usb_uhci_packet_cancel(async->queue->token, async->td_addr,
272 async->done);
273 if (!async->done)
274 usb_cancel_packet(&async->packet);
275 uhci_async_free(async);
276 }
277
278 /*
279 * Mark all outstanding async packets as invalid.
280 * This is used for canceling them when TDs are removed by the HCD.
281 */
282 static void uhci_async_validate_begin(UHCIState *s)
283 {
284 UHCIQueue *queue;
285
286 QTAILQ_FOREACH(queue, &s->queues, next) {
287 queue->valid--;
288 }
289 }
290
291 /*
292 * Cancel async packets that are no longer valid
293 */
294 static void uhci_async_validate_end(UHCIState *s)
295 {
296 UHCIQueue *queue, *n;
297
298 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) {
299 if (!queue->valid) {
300 uhci_queue_free(queue, "validate-end");
301 }
302 }
303 }
304
305 static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev)
306 {
307 UHCIQueue *queue, *n;
308
309 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) {
310 if (queue->ep->dev == dev) {
311 uhci_queue_free(queue, "cancel-device");
312 }
313 }
314 }
315
316 static void uhci_async_cancel_all(UHCIState *s)
317 {
318 UHCIQueue *queue, *nq;
319
320 QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) {
321 uhci_queue_free(queue, "cancel-all");
322 }
323 }
324
325 static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t td_addr)
326 {
327 UHCIQueue *queue;
328 UHCIAsync *async;
329
330 QTAILQ_FOREACH(queue, &s->queues, next) {
331 QTAILQ_FOREACH(async, &queue->asyncs, next) {
332 if (async->td_addr == td_addr) {
333 return async;
334 }
335 }
336 }
337 return NULL;
338 }
339
340 static void uhci_update_irq(UHCIState *s)
341 {
342 int level;
343 if (((s->status2 & 1) && (s->intr & (1 << 2))) ||
344 ((s->status2 & 2) && (s->intr & (1 << 3))) ||
345 ((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) ||
346 ((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) ||
347 (s->status & UHCI_STS_HSERR) ||
348 (s->status & UHCI_STS_HCPERR)) {
349 level = 1;
350 } else {
351 level = 0;
352 }
353 pci_set_irq(&s->dev, level);
354 }
355
356 static void uhci_reset(DeviceState *dev)
357 {
358 PCIDevice *d = PCI_DEVICE(dev);
359 UHCIState *s = UHCI(d);
360 uint8_t *pci_conf;
361 int i;
362 UHCIPort *port;
363
364 trace_usb_uhci_reset();
365
366 pci_conf = s->dev.config;
367
368 pci_conf[0x6a] = 0x01; /* usb clock */
369 pci_conf[0x6b] = 0x00;
370 s->cmd = 0;
371 s->status = UHCI_STS_HCHALTED;
372 s->status2 = 0;
373 s->intr = 0;
374 s->fl_base_addr = 0;
375 s->sof_timing = 64;
376
377 for(i = 0; i < NB_PORTS; i++) {
378 port = &s->ports[i];
379 port->ctrl = 0x0080;
380 if (port->port.dev && port->port.dev->attached) {
381 usb_port_reset(&port->port);
382 }
383 }
384
385 uhci_async_cancel_all(s);
386 qemu_bh_cancel(s->bh);
387 uhci_update_irq(s);
388 }
389
390 static const VMStateDescription vmstate_uhci_port = {
391 .name = "uhci port",
392 .version_id = 1,
393 .minimum_version_id = 1,
394 .fields = (VMStateField[]) {
395 VMSTATE_UINT16(ctrl, UHCIPort),
396 VMSTATE_END_OF_LIST()
397 }
398 };
399
400 static int uhci_post_load(void *opaque, int version_id)
401 {
402 UHCIState *s = opaque;
403
404 if (version_id < 2) {
405 s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
406 (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ);
407 }
408 return 0;
409 }
410
411 static const VMStateDescription vmstate_uhci = {
412 .name = "uhci",
413 .version_id = 3,
414 .minimum_version_id = 1,
415 .post_load = uhci_post_load,
416 .fields = (VMStateField[]) {
417 VMSTATE_PCI_DEVICE(dev, UHCIState),
418 VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState),
419 VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1,
420 vmstate_uhci_port, UHCIPort),
421 VMSTATE_UINT16(cmd, UHCIState),
422 VMSTATE_UINT16(status, UHCIState),
423 VMSTATE_UINT16(intr, UHCIState),
424 VMSTATE_UINT16(frnum, UHCIState),
425 VMSTATE_UINT32(fl_base_addr, UHCIState),
426 VMSTATE_UINT8(sof_timing, UHCIState),
427 VMSTATE_UINT8(status2, UHCIState),
428 VMSTATE_TIMER_PTR(frame_timer, UHCIState),
429 VMSTATE_INT64_V(expire_time, UHCIState, 2),
430 VMSTATE_UINT32_V(pending_int_mask, UHCIState, 3),
431 VMSTATE_END_OF_LIST()
432 }
433 };
434
435 static void uhci_port_write(void *opaque, hwaddr addr,
436 uint64_t val, unsigned size)
437 {
438 UHCIState *s = opaque;
439
440 trace_usb_uhci_mmio_writew(addr, val);
441
442 switch(addr) {
443 case 0x00:
444 if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
445 /* start frame processing */
446 trace_usb_uhci_schedule_start();
447 s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
448 (NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ);
449 timer_mod(s->frame_timer, s->expire_time);
450 s->status &= ~UHCI_STS_HCHALTED;
451 } else if (!(val & UHCI_CMD_RS)) {
452 s->status |= UHCI_STS_HCHALTED;
453 }
454 if (val & UHCI_CMD_GRESET) {
455 UHCIPort *port;
456 int i;
457
458 /* send reset on the USB bus */
459 for(i = 0; i < NB_PORTS; i++) {
460 port = &s->ports[i];
461 usb_device_reset(port->port.dev);
462 }
463 uhci_reset(DEVICE(s));
464 return;
465 }
466 if (val & UHCI_CMD_HCRESET) {
467 uhci_reset(DEVICE(s));
468 return;
469 }
470 s->cmd = val;
471 if (val & UHCI_CMD_EGSM) {
472 if ((s->ports[0].ctrl & UHCI_PORT_RD) ||
473 (s->ports[1].ctrl & UHCI_PORT_RD)) {
474 uhci_resume(s);
475 }
476 }
477 break;
478 case 0x02:
479 s->status &= ~val;
480 /* XXX: the chip spec is not coherent, so we add a hidden
481 register to distinguish between IOC and SPD */
482 if (val & UHCI_STS_USBINT)
483 s->status2 = 0;
484 uhci_update_irq(s);
485 break;
486 case 0x04:
487 s->intr = val;
488 uhci_update_irq(s);
489 break;
490 case 0x06:
491 if (s->status & UHCI_STS_HCHALTED)
492 s->frnum = val & 0x7ff;
493 break;
494 case 0x08:
495 s->fl_base_addr &= 0xffff0000;
496 s->fl_base_addr |= val & ~0xfff;
497 break;
498 case 0x0a:
499 s->fl_base_addr &= 0x0000ffff;
500 s->fl_base_addr |= (val << 16);
501 break;
502 case 0x0c:
503 s->sof_timing = val & 0xff;
504 break;
505 case 0x10 ... 0x1f:
506 {
507 UHCIPort *port;
508 USBDevice *dev;
509 int n;
510
511 n = (addr >> 1) & 7;
512 if (n >= NB_PORTS)
513 return;
514 port = &s->ports[n];
515 dev = port->port.dev;
516 if (dev && dev->attached) {
517 /* port reset */
518 if ( (val & UHCI_PORT_RESET) &&
519 !(port->ctrl & UHCI_PORT_RESET) ) {
520 usb_device_reset(dev);
521 }
522 }
523 port->ctrl &= UHCI_PORT_READ_ONLY;
524 /* enabled may only be set if a device is connected */
525 if (!(port->ctrl & UHCI_PORT_CCS)) {
526 val &= ~UHCI_PORT_EN;
527 }
528 port->ctrl |= (val & ~UHCI_PORT_READ_ONLY);
529 /* some bits are reset when a '1' is written to them */
530 port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR);
531 }
532 break;
533 }
534 }
535
536 static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size)
537 {
538 UHCIState *s = opaque;
539 uint32_t val;
540
541 switch(addr) {
542 case 0x00:
543 val = s->cmd;
544 break;
545 case 0x02:
546 val = s->status;
547 break;
548 case 0x04:
549 val = s->intr;
550 break;
551 case 0x06:
552 val = s->frnum;
553 break;
554 case 0x08:
555 val = s->fl_base_addr & 0xffff;
556 break;
557 case 0x0a:
558 val = (s->fl_base_addr >> 16) & 0xffff;
559 break;
560 case 0x0c:
561 val = s->sof_timing;
562 break;
563 case 0x10 ... 0x1f:
564 {
565 UHCIPort *port;
566 int n;
567 n = (addr >> 1) & 7;
568 if (n >= NB_PORTS)
569 goto read_default;
570 port = &s->ports[n];
571 val = port->ctrl;
572 }
573 break;
574 default:
575 read_default:
576 val = 0xff7f; /* disabled port */
577 break;
578 }
579
580 trace_usb_uhci_mmio_readw(addr, val);
581
582 return val;
583 }
584
585 /* signal resume if controller suspended */
586 static void uhci_resume (void *opaque)
587 {
588 UHCIState *s = (UHCIState *)opaque;
589
590 if (!s)
591 return;
592
593 if (s->cmd & UHCI_CMD_EGSM) {
594 s->cmd |= UHCI_CMD_FGR;
595 s->status |= UHCI_STS_RD;
596 uhci_update_irq(s);
597 }
598 }
599
600 static void uhci_attach(USBPort *port1)
601 {
602 UHCIState *s = port1->opaque;
603 UHCIPort *port = &s->ports[port1->index];
604
605 /* set connect status */
606 port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC;
607
608 /* update speed */
609 if (port->port.dev->speed == USB_SPEED_LOW) {
610 port->ctrl |= UHCI_PORT_LSDA;
611 } else {
612 port->ctrl &= ~UHCI_PORT_LSDA;
613 }
614
615 uhci_resume(s);
616 }
617
618 static void uhci_detach(USBPort *port1)
619 {
620 UHCIState *s = port1->opaque;
621 UHCIPort *port = &s->ports[port1->index];
622
623 uhci_async_cancel_device(s, port1->dev);
624
625 /* set connect status */
626 if (port->ctrl & UHCI_PORT_CCS) {
627 port->ctrl &= ~UHCI_PORT_CCS;
628 port->ctrl |= UHCI_PORT_CSC;
629 }
630 /* disable port */
631 if (port->ctrl & UHCI_PORT_EN) {
632 port->ctrl &= ~UHCI_PORT_EN;
633 port->ctrl |= UHCI_PORT_ENC;
634 }
635
636 uhci_resume(s);
637 }
638
639 static void uhci_child_detach(USBPort *port1, USBDevice *child)
640 {
641 UHCIState *s = port1->opaque;
642
643 uhci_async_cancel_device(s, child);
644 }
645
646 static void uhci_wakeup(USBPort *port1)
647 {
648 UHCIState *s = port1->opaque;
649 UHCIPort *port = &s->ports[port1->index];
650
651 if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) {
652 port->ctrl |= UHCI_PORT_RD;
653 uhci_resume(s);
654 }
655 }
656
657 static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr)
658 {
659 USBDevice *dev;
660 int i;
661
662 for (i = 0; i < NB_PORTS; i++) {
663 UHCIPort *port = &s->ports[i];
664 if (!(port->ctrl & UHCI_PORT_EN)) {
665 continue;
666 }
667 dev = usb_find_device(&port->port, addr);
668 if (dev != NULL) {
669 return dev;
670 }
671 }
672 return NULL;
673 }
674
675 static void uhci_read_td(UHCIState *s, UHCI_TD *td, uint32_t link)
676 {
677 pci_dma_read(&s->dev, link & ~0xf, td, sizeof(*td));
678 le32_to_cpus(&td->link);
679 le32_to_cpus(&td->ctrl);
680 le32_to_cpus(&td->token);
681 le32_to_cpus(&td->buffer);
682 }
683
684 static int uhci_handle_td_error(UHCIState *s, UHCI_TD *td, uint32_t td_addr,
685 int status, uint32_t *int_mask)
686 {
687 uint32_t queue_token = uhci_queue_token(td);
688 int ret;
689
690 switch (status) {
691 case USB_RET_NAK:
692 td->ctrl |= TD_CTRL_NAK;
693 return TD_RESULT_NEXT_QH;
694
695 case USB_RET_STALL:
696 td->ctrl |= TD_CTRL_STALL;
697 trace_usb_uhci_packet_complete_stall(queue_token, td_addr);
698 ret = TD_RESULT_NEXT_QH;
699 break;
700
701 case USB_RET_BABBLE:
702 td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL;
703 /* frame interrupted */
704 trace_usb_uhci_packet_complete_babble(queue_token, td_addr);
705 ret = TD_RESULT_STOP_FRAME;
706 break;
707
708 case USB_RET_IOERROR:
709 case USB_RET_NODEV:
710 default:
711 td->ctrl |= TD_CTRL_TIMEOUT;
712 td->ctrl &= ~(3 << TD_CTRL_ERROR_SHIFT);
713 trace_usb_uhci_packet_complete_error(queue_token, td_addr);
714 ret = TD_RESULT_NEXT_QH;
715 break;
716 }
717
718 td->ctrl &= ~TD_CTRL_ACTIVE;
719 s->status |= UHCI_STS_USBERR;
720 if (td->ctrl & TD_CTRL_IOC) {
721 *int_mask |= 0x01;
722 }
723 uhci_update_irq(s);
724 return ret;
725 }
726
727 static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask)
728 {
729 int len = 0, max_len;
730 uint8_t pid;
731
732 max_len = ((td->token >> 21) + 1) & 0x7ff;
733 pid = td->token & 0xff;
734
735 if (td->ctrl & TD_CTRL_IOS)
736 td->ctrl &= ~TD_CTRL_ACTIVE;
737
738 if (async->packet.status != USB_RET_SUCCESS) {
739 return uhci_handle_td_error(s, td, async->td_addr,
740 async->packet.status, int_mask);
741 }
742
743 len = async->packet.actual_length;
744 td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff);
745
746 /* The NAK bit may have been set by a previous frame, so clear it
747 here. The docs are somewhat unclear, but win2k relies on this
748 behavior. */
749 td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK);
750 if (td->ctrl & TD_CTRL_IOC)
751 *int_mask |= 0x01;
752
753 if (pid == USB_TOKEN_IN) {
754 pci_dma_write(&s->dev, td->buffer, async->buf, len);
755 if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
756 *int_mask |= 0x02;
757 /* short packet: do not update QH */
758 trace_usb_uhci_packet_complete_shortxfer(async->queue->token,
759 async->td_addr);
760 return TD_RESULT_NEXT_QH;
761 }
762 }
763
764 /* success */
765 trace_usb_uhci_packet_complete_success(async->queue->token,
766 async->td_addr);
767 return TD_RESULT_COMPLETE;
768 }
769
770 static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr,
771 UHCI_TD *td, uint32_t td_addr, uint32_t *int_mask)
772 {
773 int ret, max_len;
774 bool spd;
775 bool queuing = (q != NULL);
776 uint8_t pid = td->token & 0xff;
777 UHCIAsync *async;
778
779 switch (pid) {
780 case USB_TOKEN_OUT:
781 case USB_TOKEN_SETUP:
782 case USB_TOKEN_IN:
783 break;
784 default:
785 /* invalid pid : frame interrupted */
786 s->status |= UHCI_STS_HCPERR;
787 s->cmd &= ~UHCI_CMD_RS;
788 uhci_update_irq(s);
789 return TD_RESULT_STOP_FRAME;
790 }
791
792 async = uhci_async_find_td(s, td_addr);
793 if (async) {
794 if (uhci_queue_verify(async->queue, qh_addr, td, td_addr, queuing)) {
795 assert(q == NULL || q == async->queue);
796 q = async->queue;
797 } else {
798 uhci_queue_free(async->queue, "guest re-used pending td");
799 async = NULL;
800 }
801 }
802
803 if (q == NULL) {
804 q = uhci_queue_find(s, td);
805 if (q && !uhci_queue_verify(q, qh_addr, td, td_addr, queuing)) {
806 uhci_queue_free(q, "guest re-used qh");
807 q = NULL;
808 }
809 }
810
811 if (q) {
812 q->valid = QH_VALID;
813 }
814
815 /* Is active ? */
816 if (!(td->ctrl & TD_CTRL_ACTIVE)) {
817 if (async) {
818 /* Guest marked a pending td non-active, cancel the queue */
819 uhci_queue_free(async->queue, "pending td non-active");
820 }
821 /*
822 * ehci11d spec page 22: "Even if the Active bit in the TD is already
823 * cleared when the TD is fetched ... an IOC interrupt is generated"
824 */
825 if (td->ctrl & TD_CTRL_IOC) {
826 *int_mask |= 0x01;
827 }
828 return TD_RESULT_NEXT_QH;
829 }
830
831 if (async) {
832 if (queuing) {
833 /* we are busy filling the queue, we are not prepared
834 to consume completed packages then, just leave them
835 in async state */
836 return TD_RESULT_ASYNC_CONT;
837 }
838 if (!async->done) {
839 UHCI_TD last_td;
840 UHCIAsync *last = QTAILQ_LAST(&async->queue->asyncs, asyncs_head);
841 /*
842 * While we are waiting for the current td to complete, the guest
843 * may have added more tds to the queue. Note we re-read the td
844 * rather then caching it, as we want to see guest made changes!
845 */
846 uhci_read_td(s, &last_td, last->td_addr);
847 uhci_queue_fill(async->queue, &last_td);
848
849 return TD_RESULT_ASYNC_CONT;
850 }
851 uhci_async_unlink(async);
852 goto done;
853 }
854
855 if (s->completions_only) {
856 return TD_RESULT_ASYNC_CONT;
857 }
858
859 /* Allocate new packet */
860 if (q == NULL) {
861 USBDevice *dev = uhci_find_device(s, (td->token >> 8) & 0x7f);
862 USBEndpoint *ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf);
863
864 if (ep == NULL) {
865 return uhci_handle_td_error(s, td, td_addr, USB_RET_NODEV,
866 int_mask);
867 }
868 q = uhci_queue_new(s, qh_addr, td, ep);
869 }
870 async = uhci_async_alloc(q, td_addr);
871
872 max_len = ((td->token >> 21) + 1) & 0x7ff;
873 spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0);
874 usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd,
875 (td->ctrl & TD_CTRL_IOC) != 0);
876 if (max_len <= sizeof(async->static_buf)) {
877 async->buf = async->static_buf;
878 } else {
879 async->buf = g_malloc(max_len);
880 }
881 usb_packet_addbuf(&async->packet, async->buf, max_len);
882
883 switch(pid) {
884 case USB_TOKEN_OUT:
885 case USB_TOKEN_SETUP:
886 pci_dma_read(&s->dev, td->buffer, async->buf, max_len);
887 usb_handle_packet(q->ep->dev, &async->packet);
888 if (async->packet.status == USB_RET_SUCCESS) {
889 async->packet.actual_length = max_len;
890 }
891 break;
892
893 case USB_TOKEN_IN:
894 usb_handle_packet(q->ep->dev, &async->packet);
895 break;
896
897 default:
898 abort(); /* Never to execute */
899 }
900
901 if (async->packet.status == USB_RET_ASYNC) {
902 uhci_async_link(async);
903 if (!queuing) {
904 uhci_queue_fill(q, td);
905 }
906 return TD_RESULT_ASYNC_START;
907 }
908
909 done:
910 ret = uhci_complete_td(s, td, async, int_mask);
911 uhci_async_free(async);
912 return ret;
913 }
914
915 static void uhci_async_complete(USBPort *port, USBPacket *packet)
916 {
917 UHCIAsync *async = container_of(packet, UHCIAsync, packet);
918 UHCIState *s = async->queue->uhci;
919
920 if (packet->status == USB_RET_REMOVE_FROM_QUEUE) {
921 uhci_async_cancel(async);
922 return;
923 }
924
925 async->done = 1;
926 /* Force processing of this packet *now*, needed for migration */
927 s->completions_only = true;
928 qemu_bh_schedule(s->bh);
929 }
930
931 static int is_valid(uint32_t link)
932 {
933 return (link & 1) == 0;
934 }
935
936 static int is_qh(uint32_t link)
937 {
938 return (link & 2) != 0;
939 }
940
941 static int depth_first(uint32_t link)
942 {
943 return (link & 4) != 0;
944 }
945
946 /* QH DB used for detecting QH loops */
947 #define UHCI_MAX_QUEUES 128
948 typedef struct {
949 uint32_t addr[UHCI_MAX_QUEUES];
950 int count;
951 } QhDb;
952
953 static void qhdb_reset(QhDb *db)
954 {
955 db->count = 0;
956 }
957
958 /* Add QH to DB. Returns 1 if already present or DB is full. */
959 static int qhdb_insert(QhDb *db, uint32_t addr)
960 {
961 int i;
962 for (i = 0; i < db->count; i++)
963 if (db->addr[i] == addr)
964 return 1;
965
966 if (db->count >= UHCI_MAX_QUEUES)
967 return 1;
968
969 db->addr[db->count++] = addr;
970 return 0;
971 }
972
973 static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td)
974 {
975 uint32_t int_mask = 0;
976 uint32_t plink = td->link;
977 UHCI_TD ptd;
978 int ret;
979
980 while (is_valid(plink)) {
981 uhci_read_td(q->uhci, &ptd, plink);
982 if (!(ptd.ctrl & TD_CTRL_ACTIVE)) {
983 break;
984 }
985 if (uhci_queue_token(&ptd) != q->token) {
986 break;
987 }
988 trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token);
989 ret = uhci_handle_td(q->uhci, q, q->qh_addr, &ptd, plink, &int_mask);
990 if (ret == TD_RESULT_ASYNC_CONT) {
991 break;
992 }
993 assert(ret == TD_RESULT_ASYNC_START);
994 assert(int_mask == 0);
995 plink = ptd.link;
996 }
997 usb_device_flush_ep_queue(q->ep->dev, q->ep);
998 }
999
1000 static void uhci_process_frame(UHCIState *s)
1001 {
1002 uint32_t frame_addr, link, old_td_ctrl, val, int_mask;
1003 uint32_t curr_qh, td_count = 0;
1004 int cnt, ret;
1005 UHCI_TD td;
1006 UHCI_QH qh;
1007 QhDb qhdb;
1008
1009 frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
1010
1011 pci_dma_read(&s->dev, frame_addr, &link, 4);
1012 le32_to_cpus(&link);
1013
1014 int_mask = 0;
1015 curr_qh = 0;
1016
1017 qhdb_reset(&qhdb);
1018
1019 for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) {
1020 if (!s->completions_only && s->frame_bytes >= s->frame_bandwidth) {
1021 /* We've reached the usb 1.1 bandwidth, which is
1022 1280 bytes/frame, stop processing */
1023 trace_usb_uhci_frame_stop_bandwidth();
1024 break;
1025 }
1026 if (is_qh(link)) {
1027 /* QH */
1028 trace_usb_uhci_qh_load(link & ~0xf);
1029
1030 if (qhdb_insert(&qhdb, link)) {
1031 /*
1032 * We're going in circles. Which is not a bug because
1033 * HCD is allowed to do that as part of the BW management.
1034 *
1035 * Stop processing here if no transaction has been done
1036 * since we've been here last time.
1037 */
1038 if (td_count == 0) {
1039 trace_usb_uhci_frame_loop_stop_idle();
1040 break;
1041 } else {
1042 trace_usb_uhci_frame_loop_continue();
1043 td_count = 0;
1044 qhdb_reset(&qhdb);
1045 qhdb_insert(&qhdb, link);
1046 }
1047 }
1048
1049 pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh));
1050 le32_to_cpus(&qh.link);
1051 le32_to_cpus(&qh.el_link);
1052
1053 if (!is_valid(qh.el_link)) {
1054 /* QH w/o elements */
1055 curr_qh = 0;
1056 link = qh.link;
1057 } else {
1058 /* QH with elements */
1059 curr_qh = link;
1060 link = qh.el_link;
1061 }
1062 continue;
1063 }
1064
1065 /* TD */
1066 uhci_read_td(s, &td, link);
1067 trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token);
1068
1069 old_td_ctrl = td.ctrl;
1070 ret = uhci_handle_td(s, NULL, curr_qh, &td, link, &int_mask);
1071 if (old_td_ctrl != td.ctrl) {
1072 /* update the status bits of the TD */
1073 val = cpu_to_le32(td.ctrl);
1074 pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val));
1075 }
1076
1077 switch (ret) {
1078 case TD_RESULT_STOP_FRAME: /* interrupted frame */
1079 goto out;
1080
1081 case TD_RESULT_NEXT_QH:
1082 case TD_RESULT_ASYNC_CONT:
1083 trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf);
1084 link = curr_qh ? qh.link : td.link;
1085 continue;
1086
1087 case TD_RESULT_ASYNC_START:
1088 trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf);
1089 link = curr_qh ? qh.link : td.link;
1090 continue;
1091
1092 case TD_RESULT_COMPLETE:
1093 trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf);
1094 link = td.link;
1095 td_count++;
1096 s->frame_bytes += (td.ctrl & 0x7ff) + 1;
1097
1098 if (curr_qh) {
1099 /* update QH element link */
1100 qh.el_link = link;
1101 val = cpu_to_le32(qh.el_link);
1102 pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val));
1103
1104 if (!depth_first(link)) {
1105 /* done with this QH */
1106 curr_qh = 0;
1107 link = qh.link;
1108 }
1109 }
1110 break;
1111
1112 default:
1113 assert(!"unknown return code");
1114 }
1115
1116 /* go to the next entry */
1117 }
1118
1119 out:
1120 s->pending_int_mask |= int_mask;
1121 }
1122
1123 static void uhci_bh(void *opaque)
1124 {
1125 UHCIState *s = opaque;
1126 uhci_process_frame(s);
1127 }
1128
1129 static void uhci_frame_timer(void *opaque)
1130 {
1131 UHCIState *s = opaque;
1132 uint64_t t_now, t_last_run;
1133 int i, frames;
1134 const uint64_t frame_t = NANOSECONDS_PER_SECOND / FRAME_TIMER_FREQ;
1135
1136 s->completions_only = false;
1137 qemu_bh_cancel(s->bh);
1138
1139 if (!(s->cmd & UHCI_CMD_RS)) {
1140 /* Full stop */
1141 trace_usb_uhci_schedule_stop();
1142 timer_del(s->frame_timer);
1143 uhci_async_cancel_all(s);
1144 /* set hchalted bit in status - UHCI11D 2.1.2 */
1145 s->status |= UHCI_STS_HCHALTED;
1146 return;
1147 }
1148
1149 /* We still store expire_time in our state, for migration */
1150 t_last_run = s->expire_time - frame_t;
1151 t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
1152
1153 /* Process up to MAX_FRAMES_PER_TICK frames */
1154 frames = (t_now - t_last_run) / frame_t;
1155 if (frames > s->maxframes) {
1156 int skipped = frames - s->maxframes;
1157 s->expire_time += skipped * frame_t;
1158 s->frnum = (s->frnum + skipped) & 0x7ff;
1159 frames -= skipped;
1160 }
1161 if (frames > MAX_FRAMES_PER_TICK) {
1162 frames = MAX_FRAMES_PER_TICK;
1163 }
1164
1165 for (i = 0; i < frames; i++) {
1166 s->frame_bytes = 0;
1167 trace_usb_uhci_frame_start(s->frnum);
1168 uhci_async_validate_begin(s);
1169 uhci_process_frame(s);
1170 uhci_async_validate_end(s);
1171 /* The spec says frnum is the frame currently being processed, and
1172 * the guest must look at frnum - 1 on interrupt, so inc frnum now */
1173 s->frnum = (s->frnum + 1) & 0x7ff;
1174 s->expire_time += frame_t;
1175 }
1176
1177 /* Complete the previous frame(s) */
1178 if (s->pending_int_mask) {
1179 s->status2 |= s->pending_int_mask;
1180 s->status |= UHCI_STS_USBINT;
1181 uhci_update_irq(s);
1182 }
1183 s->pending_int_mask = 0;
1184
1185 timer_mod(s->frame_timer, t_now + frame_t);
1186 }
1187
1188 static const MemoryRegionOps uhci_ioport_ops = {
1189 .read = uhci_port_read,
1190 .write = uhci_port_write,
1191 .valid.min_access_size = 1,
1192 .valid.max_access_size = 4,
1193 .impl.min_access_size = 2,
1194 .impl.max_access_size = 2,
1195 .endianness = DEVICE_LITTLE_ENDIAN,
1196 };
1197
1198 static USBPortOps uhci_port_ops = {
1199 .attach = uhci_attach,
1200 .detach = uhci_detach,
1201 .child_detach = uhci_child_detach,
1202 .wakeup = uhci_wakeup,
1203 .complete = uhci_async_complete,
1204 };
1205
1206 static USBBusOps uhci_bus_ops = {
1207 };
1208
1209 static void usb_uhci_common_realize(PCIDevice *dev, Error **errp)
1210 {
1211 Error *err = NULL;
1212 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
1213 UHCIPCIDeviceClass *u = container_of(pc, UHCIPCIDeviceClass, parent_class);
1214 UHCIState *s = UHCI(dev);
1215 uint8_t *pci_conf = s->dev.config;
1216 int i;
1217
1218 pci_conf[PCI_CLASS_PROG] = 0x00;
1219 /* TODO: reset value should be 0. */
1220 pci_conf[USB_SBRN] = USB_RELEASE_1; // release number
1221
1222 pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1);
1223
1224 if (s->masterbus) {
1225 USBPort *ports[NB_PORTS];
1226 for(i = 0; i < NB_PORTS; i++) {
1227 ports[i] = &s->ports[i].port;
1228 }
1229 usb_register_companion(s->masterbus, ports, NB_PORTS,
1230 s->firstport, s, &uhci_port_ops,
1231 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL,
1232 &err);
1233 if (err) {
1234 error_propagate(errp, err);
1235 return;
1236 }
1237 } else {
1238 usb_bus_new(&s->bus, sizeof(s->bus), &uhci_bus_ops, DEVICE(dev));
1239 for (i = 0; i < NB_PORTS; i++) {
1240 usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops,
1241 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
1242 }
1243 }
1244 s->bh = qemu_bh_new(uhci_bh, s);
1245 s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s);
1246 s->num_ports_vmstate = NB_PORTS;
1247 QTAILQ_INIT(&s->queues);
1248
1249 memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s,
1250 "uhci", 0x20);
1251
1252 /* Use region 4 for consistency with real hardware. BSD guests seem
1253 to rely on this. */
1254 pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar);
1255 }
1256
1257 static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp)
1258 {
1259 UHCIState *s = UHCI(dev);
1260 uint8_t *pci_conf = s->dev.config;
1261
1262 /* USB misc control 1/2 */
1263 pci_set_long(pci_conf + 0x40,0x00001000);
1264 /* PM capability */
1265 pci_set_long(pci_conf + 0x80,0x00020001);
1266 /* USB legacy support */
1267 pci_set_long(pci_conf + 0xc0,0x00002000);
1268
1269 usb_uhci_common_realize(dev, errp);
1270 }
1271
1272 static void usb_uhci_exit(PCIDevice *dev)
1273 {
1274 UHCIState *s = UHCI(dev);
1275
1276 trace_usb_uhci_exit();
1277
1278 if (s->frame_timer) {
1279 timer_del(s->frame_timer);
1280 timer_free(s->frame_timer);
1281 s->frame_timer = NULL;
1282 }
1283
1284 if (s->bh) {
1285 qemu_bh_delete(s->bh);
1286 }
1287
1288 uhci_async_cancel_all(s);
1289
1290 if (!s->masterbus) {
1291 usb_bus_release(&s->bus);
1292 }
1293 }
1294
1295 static Property uhci_properties_companion[] = {
1296 DEFINE_PROP_STRING("masterbus", UHCIState, masterbus),
1297 DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0),
1298 DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
1299 DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
1300 DEFINE_PROP_END_OF_LIST(),
1301 };
1302 static Property uhci_properties_standalone[] = {
1303 DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
1304 DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
1305 DEFINE_PROP_END_OF_LIST(),
1306 };
1307
1308 static void uhci_class_init(ObjectClass *klass, void *data)
1309 {
1310 DeviceClass *dc = DEVICE_CLASS(klass);
1311 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1312
1313 k->class_id = PCI_CLASS_SERIAL_USB;
1314 dc->vmsd = &vmstate_uhci;
1315 dc->reset = uhci_reset;
1316 set_bit(DEVICE_CATEGORY_USB, dc->categories);
1317 }
1318
1319 static const TypeInfo uhci_pci_type_info = {
1320 .name = TYPE_UHCI,
1321 .parent = TYPE_PCI_DEVICE,
1322 .instance_size = sizeof(UHCIState),
1323 .class_size = sizeof(UHCIPCIDeviceClass),
1324 .abstract = true,
1325 .class_init = uhci_class_init,
1326 };
1327
1328 static void uhci_data_class_init(ObjectClass *klass, void *data)
1329 {
1330 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1331 DeviceClass *dc = DEVICE_CLASS(klass);
1332 UHCIPCIDeviceClass *u = container_of(k, UHCIPCIDeviceClass, parent_class);
1333 UHCIInfo *info = data;
1334
1335 k->realize = info->realize ? info->realize : usb_uhci_common_realize;
1336 k->exit = info->unplug ? usb_uhci_exit : NULL;
1337 k->vendor_id = info->vendor_id;
1338 k->device_id = info->device_id;
1339 k->revision = info->revision;
1340 if (!info->unplug) {
1341 /* uhci controllers in companion setups can't be hotplugged */
1342 dc->hotpluggable = false;
1343 dc->props = uhci_properties_companion;
1344 } else {
1345 dc->props = uhci_properties_standalone;
1346 }
1347 u->info = *info;
1348 }
1349
1350 static UHCIInfo uhci_info[] = {
1351 {
1352 .name = "piix3-usb-uhci",
1353 .vendor_id = PCI_VENDOR_ID_INTEL,
1354 .device_id = PCI_DEVICE_ID_INTEL_82371SB_2,
1355 .revision = 0x01,
1356 .irq_pin = 3,
1357 .unplug = true,
1358 },{
1359 .name = "piix4-usb-uhci",
1360 .vendor_id = PCI_VENDOR_ID_INTEL,
1361 .device_id = PCI_DEVICE_ID_INTEL_82371AB_2,
1362 .revision = 0x01,
1363 .irq_pin = 3,
1364 .unplug = true,
1365 },{
1366 .name = "vt82c686b-usb-uhci",
1367 .vendor_id = PCI_VENDOR_ID_VIA,
1368 .device_id = PCI_DEVICE_ID_VIA_UHCI,
1369 .revision = 0x01,
1370 .irq_pin = 3,
1371 .realize = usb_uhci_vt82c686b_realize,
1372 .unplug = true,
1373 },{
1374 .name = "ich9-usb-uhci1", /* 00:1d.0 */
1375 .vendor_id = PCI_VENDOR_ID_INTEL,
1376 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1,
1377 .revision = 0x03,
1378 .irq_pin = 0,
1379 .unplug = false,
1380 },{
1381 .name = "ich9-usb-uhci2", /* 00:1d.1 */
1382 .vendor_id = PCI_VENDOR_ID_INTEL,
1383 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2,
1384 .revision = 0x03,
1385 .irq_pin = 1,
1386 .unplug = false,
1387 },{
1388 .name = "ich9-usb-uhci3", /* 00:1d.2 */
1389 .vendor_id = PCI_VENDOR_ID_INTEL,
1390 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3,
1391 .revision = 0x03,
1392 .irq_pin = 2,
1393 .unplug = false,
1394 },{
1395 .name = "ich9-usb-uhci4", /* 00:1a.0 */
1396 .vendor_id = PCI_VENDOR_ID_INTEL,
1397 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4,
1398 .revision = 0x03,
1399 .irq_pin = 0,
1400 .unplug = false,
1401 },{
1402 .name = "ich9-usb-uhci5", /* 00:1a.1 */
1403 .vendor_id = PCI_VENDOR_ID_INTEL,
1404 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5,
1405 .revision = 0x03,
1406 .irq_pin = 1,
1407 .unplug = false,
1408 },{
1409 .name = "ich9-usb-uhci6", /* 00:1a.2 */
1410 .vendor_id = PCI_VENDOR_ID_INTEL,
1411 .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6,
1412 .revision = 0x03,
1413 .irq_pin = 2,
1414 .unplug = false,
1415 }
1416 };
1417
1418 static void uhci_register_types(void)
1419 {
1420 TypeInfo uhci_type_info = {
1421 .parent = TYPE_UHCI,
1422 .class_init = uhci_data_class_init,
1423 };
1424 int i;
1425
1426 type_register_static(&uhci_pci_type_info);
1427
1428 for (i = 0; i < ARRAY_SIZE(uhci_info); i++) {
1429 uhci_type_info.name = uhci_info[i].name;
1430 uhci_type_info.class_data = uhci_info + i;
1431 type_register(&uhci_type_info);
1432 }
1433 }
1434
1435 type_init(uhci_register_types)
QEMU mirror