Fix some typos in documentation and comments

Most of them were found and fixed using codespell.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221030105944.311940-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
index fbb98faabeed4ea31a0437d79e3143e85a926435..e10c47b5a7cadc2d206447fea9a91a00c7a5b73b 100644 (file)
--- a/docs/devel/testing.rst
+++ b/docs/devel/testing.rst
@@ -99,7 +99,7 @@ successfully on various hosts. The following list shows some best practices:
 * If your test cases uses the blkdebug feature, use relative path to pass
   the config and image file paths in the command line as Windows absolute
   path contains the delimiter ":" which will confuse the blkdebug parser.
-* Use double quotes in your extra QEMU commmand line in your test cases
+* Use double quotes in your extra QEMU command line in your test cases
   instead of single quotes, as Windows does not drop single quotes when
   passing the command line to QEMU.
 * Windows opens a file in text mode by default, while a POSIX compliant

diff --git a/docs/system/arm/cpu-features.rst b/docs/system/arm/cpu-features.rst
index c2c01ec7d265d17838dc65b19ddccb632cae47ea..00c444042ff54999c453965973483d836363dfb0 100644 (file)
--- a/docs/system/arm/cpu-features.rst
+++ b/docs/system/arm/cpu-features.rst
@@ -433,7 +433,7 @@ additional constraints on the set of vector lengths supported by SME.
 SME User-mode Default Vector Length Property
 --------------------------------------------
 
-For qemu-aarch64, the cpu propery ``sme-default-vector-length=N`` is
+For qemu-aarch64, the cpu property ``sme-default-vector-length=N`` is
 defined to mirror the Linux kernel parameter file
 ``/proc/sys/abi/sme_default_vector_length``.  The default length, ``N``,
 is in units of bytes and must be between 16 and 8192.

diff --git a/docs/system/loongarch/loongson3.rst b/docs/system/loongarch/loongson3.rst
index 1bdab44e2728a88d2bc2db37d7dc7310d2c5c3dc..489ea20f8ff7039aecfbc6e92f602cea9311b3a1 100644 (file)
--- a/docs/system/loongarch/loongson3.rst
+++ b/docs/system/loongarch/loongson3.rst
@@ -41,7 +41,7 @@ can be accessed by following steps.
 
   $ qemu-system-loongarch64 -machine virt -m 4G -cpu la464-loongarch-cpu \
       -smp 1 -bios QEMU_EFI.fd -kernel vmlinuz.efi -initrd initrd.img \
-      -append "root=/dev/ram rdinit=/sbin/init consol e=ttyS0,115200" \
+      -append "root=/dev/ram rdinit=/sbin/init console=ttyS0,115200" \
       --nographic
 
 Note: The running speed may be a little slow, as the performance of our

diff --git a/docs/tools/virtiofsd.rst b/docs/tools/virtiofsd.rst
index 5f5ac9dd56a33d89ac8eb83809bd4d08de178f5d..995a754a7bf9d509dc24b18a7658342c7480c923 100644 (file)
--- a/docs/tools/virtiofsd.rst
+++ b/docs/tools/virtiofsd.rst
@@ -232,7 +232,7 @@ e.g.:
 
   ``:ok:server::security.:``
 
-  will pass 'securty.' xattr's in listxattr from the server
+  will pass 'security.' xattr's in listxattr from the server
   and ignore following rules.
 
   ``:ok:all:::``

diff --git a/include/exec/memory.h b/include/exec/memory.h
index bfb1de8eeae1fbda9da1581a7e12baa5d355f61f..a751c111bd3d27dbc4ce9b11124b7aa7dd2b19d6 100644 (file)
--- a/include/exec/memory.h
+++ b/include/exec/memory.h
@@ -1970,7 +1970,7 @@ void memory_region_clear_dirty_bitmap(MemoryRegion *mr, hwaddr start,
  * querying the same page multiple times, which is especially useful for
  * display updates where the scanlines often are not page aligned.
  *
- * The dirty bitmap region which gets copyed into the snapshot (and
+ * The dirty bitmap region which gets copied into the snapshot (and
  * cleared afterwards) can be larger than requested.  The boundaries
  * are rounded up/down so complete bitmap longs (covering 64 pages on
  * 64bit hosts) can be copied over into the bitmap snapshot.  Which

diff --git a/qapi/qom.json b/qapi/qom.json
index 87fcad2423aec16c1fef1eb0d9809f75acc075fc..4db956f07e6c8b92c2ef256b16f7a8ab8e21e898 100644 (file)
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -589,7 +589,7 @@
 #
 # @size: size of the memory region in bytes
 #
-# @x-use-canonical-path-for-ramblock-id: if true, the canoncial path is used
+# @x-use-canonical-path-for-ramblock-id: if true, the canonical path is used
 #                                        for ramblock-id. Disable this for 4.0
 #                                        machine types or older to allow
 #                                        migration with newer QEMU versions.

diff --git a/qemu-options.hx b/qemu-options.hx
index 911d82afa5af4b958048d082e05beebcb99b7c3f..dbdf9c301b0215a7a3fbbac771e1df3fdaee85d6 100644 (file)
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1051,7 +1051,7 @@ SRST
     details on the external interface.
 
 ``-device isa-ipmi-kcs,bmc=id[,ioport=val][,irq=val]``
-    Add a KCS IPMI interafce on the ISA bus. This also adds a
+    Add a KCS IPMI interface on the ISA bus. This also adds a
     corresponding ACPI and SMBIOS entries, if appropriate.
 
     ``bmc=id``
@@ -1071,7 +1071,7 @@ SRST
     is 0xe4 and the default interrupt is 5.
 
 ``-device pci-ipmi-kcs,bmc=id``
-    Add a KCS IPMI interafce on the PCI bus.
+    Add a KCS IPMI interface on the PCI bus.
 
     ``bmc=id``
         The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above.
@@ -5283,8 +5283,8 @@ SRST
         read the colo-compare git log.
 
     ``-object cryptodev-backend-builtin,id=id[,queues=queues]``
-        Creates a cryptodev backend which executes crypto opreation from
-        the QEMU cipher APIS. The id parameter is a unique ID that will
+        Creates a cryptodev backend which executes crypto operations from
+        the QEMU cipher APIs. The id parameter is a unique ID that will
         be used to reference this cryptodev backend from the
         ``virtio-crypto`` device. The queues parameter is optional,
         which specify the queue number of cryptodev backend, the default
@@ -5551,7 +5551,7 @@ SRST
                        file=/etc/qemu/vnc.allow
 
         Finally the ``/etc/qemu/vnc.allow`` file would contain the list
-        of x509 distingished names that are permitted access
+        of x509 distinguished names that are permitted access
 
         ::
 

diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 026a56f76caf5eb500d62101715f80e1f1dedbe1..796434ed346fb8422e6e860de22cca8f41952c47 100644 (file)
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -392,7 +392,7 @@
 ##
 # @guest-file-flush:
 #
-# Write file changes bufferred in userspace to disk/kernel buffers
+# Write file changes buffered in userspace to disk/kernel buffers
 #
 # @handle: filehandle returned by guest-file-open
 #

diff --git a/tests/qtest/libqtest.h b/tests/qtest/libqtest.h
index 91a5f7edd94d0e1807c7734c71dc966f4f6eea22..fcf1c3c3b36f3ab4d395c5807208792421d3ee63 100644 (file)
--- a/tests/qtest/libqtest.h
+++ b/tests/qtest/libqtest.h
@@ -736,7 +736,7 @@ bool qtest_has_device(const char *device);
  * qtest_qmp_device_add_qdict:
  * @qts: QTestState instance to operate on
  * @drv: Name of the device that should be added
- * @arguments: QDict with properties for the device to intialize
+ * @arguments: QDict with properties for the device to initialize
  *
  * Generic hot-plugging test via the device_add QMP command with properties
  * supplied in form of QDict. Use NULL for empty properties list.