--- /dev/null
+#ifndef AARCH64_TARGET_ERRNO_DEFS_H
+#define AARCH64_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef ALPHA_TARGET_ERRNO_DEFS_H
+#define ALPHA_TARGET_ERRNO_DEFS_H
+
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef ARM_TARGET_ERRNO_DEFS_H
+#define ARM_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef CRIS_TARGET_ERRNO_DEFS_H
+#define CRIS_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
+++ /dev/null
-/*
- * Target definitions of errnos. These may be overridden by an
- * architecture specific header if needed.
- *
- * Taken from asm-generic/errno-base.h and asm-generic/errno.h
- */
-
-#ifndef LINUX_USER_ERRNO_DEFS_H
-#define LINUX_USER_ERRNO_DEFS_H
-
-#define TARGET_EPERM 1 /* Operation not permitted */
-#define TARGET_ENOENT 2 /* No such file or directory */
-#define TARGET_ESRCH 3 /* No such process */
-#define TARGET_EINTR 4 /* Interrupted system call */
-#define TARGET_EIO 5 /* I/O error */
-#define TARGET_ENXIO 6 /* No such device or address */
-#define TARGET_E2BIG 7 /* Argument list too long */
-#define TARGET_ENOEXEC 8 /* TARGET_Exec format error */
-#define TARGET_EBADF 9 /* Bad file number */
-#define TARGET_ECHILD 10 /* No child processes */
-#define TARGET_EAGAIN 11 /* Try again */
-#define TARGET_ENOMEM 12 /* Out of memory */
-#define TARGET_EACCES 13 /* Permission denied */
-#define TARGET_EFAULT 14 /* Bad address */
-#define TARGET_ENOTBLK 15 /* Block device required */
-#define TARGET_EBUSY 16 /* Device or resource busy */
-#define TARGET_EEXIST 17 /* File exists */
-#define TARGET_EXDEV 18 /* Cross-device link */
-#define TARGET_ENODEV 19 /* No such device */
-#define TARGET_ENOTDIR 20 /* Not a directory */
-#define TARGET_EISDIR 21 /* Is a directory */
-#define TARGET_EINVAL 22 /* Invalid argument */
-#define TARGET_ENFILE 23 /* File table overflow */
-#define TARGET_EMFILE 24 /* Too many open files */
-#define TARGET_ENOTTY 25 /* Not a typewriter */
-#define TARGET_ETXTBSY 26 /* Text file busy */
-#define TARGET_EFBIG 27 /* File too large */
-#define TARGET_ENOSPC 28 /* No space left on device */
-#define TARGET_ESPIPE 29 /* Illegal seek */
-#define TARGET_EROFS 30 /* Read-only file system */
-#define TARGET_EMLINK 31 /* Too many links */
-#define TARGET_EPIPE 32 /* Broken pipe */
-#define TARGET_EDOM 33 /* Math argument out of domain of func */
-#define TARGET_ERANGE 34 /* Math result not representable */
-
-#define TARGET_EDEADLK 35 /* Resource deadlock would occur */
-#define TARGET_ENAMETOOLONG 36 /* File name too long */
-#define TARGET_ENOLCK 37 /* No record locks available */
-#define TARGET_ENOSYS 38 /* Function not implemented */
-#define TARGET_ENOTEMPTY 39 /* Directory not empty */
-#define TARGET_ELOOP 40 /* Too many symbolic links encountered */
-
-#define TARGET_ENOMSG 42 /* No message of desired type */
-#define TARGET_EIDRM 43 /* Identifier removed */
-#define TARGET_ECHRNG 44 /* Channel number out of range */
-#define TARGET_EL2NSYNC 45 /* Level 2 not synchronized */
-#define TARGET_EL3HLT 46 /* Level 3 halted */
-#define TARGET_EL3RST 47 /* Level 3 reset */
-#define TARGET_ELNRNG 48 /* Link number out of range */
-#define TARGET_EUNATCH 49 /* Protocol driver not attached */
-#define TARGET_ENOCSI 50 /* No CSI structure available */
-#define TARGET_EL2HLT 51 /* Level 2 halted */
-#define TARGET_EBADE 52 /* Invalid exchange */
-#define TARGET_EBADR 53 /* Invalid request descriptor */
-#define TARGET_EXFULL 54 /* TARGET_Exchange full */
-#define TARGET_ENOANO 55 /* No anode */
-#define TARGET_EBADRQC 56 /* Invalid request code */
-#define TARGET_EBADSLT 57 /* Invalid slot */
-
-#define TARGET_EBFONT 59 /* Bad font file format */
-#define TARGET_ENOSTR 60 /* Device not a stream */
-#define TARGET_ENODATA 61 /* No data available */
-#define TARGET_ETIME 62 /* Timer expired */
-#define TARGET_ENOSR 63 /* Out of streams resources */
-#define TARGET_ENONET 64 /* Machine is not on the network */
-#define TARGET_ENOPKG 65 /* Package not installed */
-#define TARGET_EREMOTE 66 /* Object is remote */
-#define TARGET_ENOLINK 67 /* Link has been severed */
-#define TARGET_EADV 68 /* Advertise error */
-#define TARGET_ESRMNT 69 /* Srmount error */
-#define TARGET_ECOMM 70 /* Communication error on send */
-#define TARGET_EPROTO 71 /* Protocol error */
-#define TARGET_EMULTIHOP 72 /* Multihop attempted */
-#define TARGET_EDOTDOT 73 /* RFS specific error */
-#define TARGET_EBADMSG 74 /* Not a data message */
-#define TARGET_EOVERFLOW 75 /* Value too large for defined data type */
-#define TARGET_ENOTUNIQ 76 /* Name not unique on network */
-#define TARGET_EBADFD 77 /* File descriptor in bad state */
-#define TARGET_EREMCHG 78 /* Remote address changed */
-#define TARGET_ELIBACC 79 /* Can not access a needed shared library */
-#define TARGET_ELIBBAD 80 /* Accessing a corrupted shared library */
-#define TARGET_ELIBSCN 81 /* .lib section in a.out corrupted */
-#define TARGET_ELIBMAX 82 /* Attempting to link in too many shared libraries */
-#define TARGET_ELIBEXEC 83 /* Cannot exec a shared library directly */
-#define TARGET_EILSEQ 84 /* Illegal byte sequence */
-#define TARGET_ERESTART 85 /* Interrupted system call should be restarted */
-#define TARGET_ESTRPIPE 86 /* Streams pipe error */
-#define TARGET_EUSERS 87 /* Too many users */
-#define TARGET_ENOTSOCK 88 /* Socket operation on non-socket */
-#define TARGET_EDESTADDRREQ 89 /* Destination address required */
-#define TARGET_EMSGSIZE 90 /* Message too long */
-#define TARGET_EPROTOTYPE 91 /* Protocol wrong type for socket */
-#define TARGET_ENOPROTOOPT 92 /* Protocol not available */
-#define TARGET_EPROTONOSUPPORT 93 /* Protocol not supported */
-#define TARGET_ESOCKTNOSUPPORT 94 /* Socket type not supported */
-#define TARGET_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
-#define TARGET_EPFNOSUPPORT 96 /* Protocol family not supported */
-#define TARGET_EAFNOSUPPORT 97 /* Address family not supported by protocol */
-#define TARGET_EADDRINUSE 98 /* Address already in use */
-#define TARGET_EADDRNOTAVAIL 99 /* Cannot assign requested address */
-#define TARGET_ENETDOWN 100 /* Network is down */
-#define TARGET_ENETUNREACH 101 /* Network is unreachable */
-#define TARGET_ENETRESET 102 /* Network dropped connection because of reset */
-#define TARGET_ECONNABORTED 103 /* Software caused connection abort */
-#define TARGET_ECONNRESET 104 /* Connection reset by peer */
-#define TARGET_ENOBUFS 105 /* No buffer space available */
-#define TARGET_EISCONN 106 /* Transport endpoint is already connected */
-#define TARGET_ENOTCONN 107 /* Transport endpoint is not connected */
-#define TARGET_ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
-#define TARGET_ETOOMANYREFS 109 /* Too many references: cannot splice */
-#define TARGET_ETIMEDOUT 110 /* Connection timed out */
-#define TARGET_ECONNREFUSED 111 /* Connection refused */
-#define TARGET_EHOSTDOWN 112 /* Host is down */
-#define TARGET_EHOSTUNREACH 113 /* No route to host */
-#define TARGET_EALREADY 114 /* Operation already in progress */
-#define TARGET_EINPROGRESS 115 /* Operation now in progress */
-#define TARGET_ESTALE 116 /* Stale NFS file handle */
-#define TARGET_EUCLEAN 117 /* Structure needs cleaning */
-#define TARGET_ENOTNAM 118 /* Not a XENIX named type file */
-#define TARGET_ENAVAIL 119 /* No XENIX semaphores available */
-#define TARGET_EISNAM 120 /* Is a named type file */
-#define TARGET_EREMOTEIO 121 /* Remote I/O error */
-#define TARGET_EDQUOT 122 /* Quota exceeded */
-
-#define TARGET_ENOMEDIUM 123 /* No medium found */
-#define TARGET_EMEDIUMTYPE 124 /* Wrong medium type */
-#define TARGET_ECANCELED 125 /* Operation Canceled */
-#define TARGET_ENOKEY 126 /* Required key not available */
-#define TARGET_EKEYEXPIRED 127 /* Key has expired */
-#define TARGET_EKEYREVOKED 128 /* Key has been revoked */
-#define TARGET_EKEYREJECTED 129 /* Key was rejected by service */
-
-/* for robust mutexes */
-#define TARGET_EOWNERDEAD 130 /* Owner died */
-#define TARGET_ENOTRECOVERABLE 131 /* State not recoverable */
-
-#define TARGET_ERFKILL 132 /* Operation not possible due to RF-kill */
-#define TARGET_EHWPOISON 133 /* Memory page has hardware error */
-
-/* QEMU internal, not visible to the guest. This is returned when a
- * system call should be restarted, to tell the main loop that it
- * should wind the guest PC backwards so it will re-execute the syscall
- * after handling any pending signals. They match with the ones the guest
- * kernel uses for the same purpose.
- */
-#define TARGET_ERESTARTSYS 512 /* Restart system call (if SA_RESTART) */
-
-/* QEMU internal, not visible to the guest. This is returned by the
- * do_sigreturn() code after a successful sigreturn syscall, to indicate
- * that it has correctly set the guest registers and so the main loop
- * should not touch them. We use the value the guest would use for
- * ERESTART_NOINTR (which is kernel internal) to guarantee that we won't
- * clash with a valid guest errno now or in the future.
- */
-#define TARGET_QEMU_ESIGRETURN 513 /* Return from signal */
-
-#endif
--- /dev/null
+/*
+ * Target definitions of errnos. These may be overridden by an
+ * architecture specific header if needed.
+ *
+ * Taken from asm-generic/errno-base.h and asm-generic/errno.h
+ */
+
+#ifndef GENERIC_TARGET_ERRNO_DEFS_H
+#define GENERIC_TARGET_ERRNO_DEFS_H
+
+#define TARGET_EPERM 1 /* Operation not permitted */
+#define TARGET_ENOENT 2 /* No such file or directory */
+#define TARGET_ESRCH 3 /* No such process */
+#define TARGET_EINTR 4 /* Interrupted system call */
+#define TARGET_EIO 5 /* I/O error */
+#define TARGET_ENXIO 6 /* No such device or address */
+#define TARGET_E2BIG 7 /* Argument list too long */
+#define TARGET_ENOEXEC 8 /* TARGET_Exec format error */
+#define TARGET_EBADF 9 /* Bad file number */
+#define TARGET_ECHILD 10 /* No child processes */
+#define TARGET_EAGAIN 11 /* Try again */
+#define TARGET_ENOMEM 12 /* Out of memory */
+#define TARGET_EACCES 13 /* Permission denied */
+#define TARGET_EFAULT 14 /* Bad address */
+#define TARGET_ENOTBLK 15 /* Block device required */
+#define TARGET_EBUSY 16 /* Device or resource busy */
+#define TARGET_EEXIST 17 /* File exists */
+#define TARGET_EXDEV 18 /* Cross-device link */
+#define TARGET_ENODEV 19 /* No such device */
+#define TARGET_ENOTDIR 20 /* Not a directory */
+#define TARGET_EISDIR 21 /* Is a directory */
+#define TARGET_EINVAL 22 /* Invalid argument */
+#define TARGET_ENFILE 23 /* File table overflow */
+#define TARGET_EMFILE 24 /* Too many open files */
+#define TARGET_ENOTTY 25 /* Not a typewriter */
+#define TARGET_ETXTBSY 26 /* Text file busy */
+#define TARGET_EFBIG 27 /* File too large */
+#define TARGET_ENOSPC 28 /* No space left on device */
+#define TARGET_ESPIPE 29 /* Illegal seek */
+#define TARGET_EROFS 30 /* Read-only file system */
+#define TARGET_EMLINK 31 /* Too many links */
+#define TARGET_EPIPE 32 /* Broken pipe */
+#define TARGET_EDOM 33 /* Math argument out of domain of func */
+#define TARGET_ERANGE 34 /* Math result not representable */
+
+#define TARGET_EDEADLK 35 /* Resource deadlock would occur */
+#define TARGET_ENAMETOOLONG 36 /* File name too long */
+#define TARGET_ENOLCK 37 /* No record locks available */
+#define TARGET_ENOSYS 38 /* Function not implemented */
+#define TARGET_ENOTEMPTY 39 /* Directory not empty */
+#define TARGET_ELOOP 40 /* Too many symbolic links encountered */
+
+#define TARGET_ENOMSG 42 /* No message of desired type */
+#define TARGET_EIDRM 43 /* Identifier removed */
+#define TARGET_ECHRNG 44 /* Channel number out of range */
+#define TARGET_EL2NSYNC 45 /* Level 2 not synchronized */
+#define TARGET_EL3HLT 46 /* Level 3 halted */
+#define TARGET_EL3RST 47 /* Level 3 reset */
+#define TARGET_ELNRNG 48 /* Link number out of range */
+#define TARGET_EUNATCH 49 /* Protocol driver not attached */
+#define TARGET_ENOCSI 50 /* No CSI structure available */
+#define TARGET_EL2HLT 51 /* Level 2 halted */
+#define TARGET_EBADE 52 /* Invalid exchange */
+#define TARGET_EBADR 53 /* Invalid request descriptor */
+#define TARGET_EXFULL 54 /* TARGET_Exchange full */
+#define TARGET_ENOANO 55 /* No anode */
+#define TARGET_EBADRQC 56 /* Invalid request code */
+#define TARGET_EBADSLT 57 /* Invalid slot */
+
+#define TARGET_EBFONT 59 /* Bad font file format */
+#define TARGET_ENOSTR 60 /* Device not a stream */
+#define TARGET_ENODATA 61 /* No data available */
+#define TARGET_ETIME 62 /* Timer expired */
+#define TARGET_ENOSR 63 /* Out of streams resources */
+#define TARGET_ENONET 64 /* Machine is not on the network */
+#define TARGET_ENOPKG 65 /* Package not installed */
+#define TARGET_EREMOTE 66 /* Object is remote */
+#define TARGET_ENOLINK 67 /* Link has been severed */
+#define TARGET_EADV 68 /* Advertise error */
+#define TARGET_ESRMNT 69 /* Srmount error */
+#define TARGET_ECOMM 70 /* Communication error on send */
+#define TARGET_EPROTO 71 /* Protocol error */
+#define TARGET_EMULTIHOP 72 /* Multihop attempted */
+#define TARGET_EDOTDOT 73 /* RFS specific error */
+#define TARGET_EBADMSG 74 /* Not a data message */
+#define TARGET_EOVERFLOW 75 /* Value too large for defined data type */
+#define TARGET_ENOTUNIQ 76 /* Name not unique on network */
+#define TARGET_EBADFD 77 /* File descriptor in bad state */
+#define TARGET_EREMCHG 78 /* Remote address changed */
+#define TARGET_ELIBACC 79 /* Can not access a needed shared library */
+#define TARGET_ELIBBAD 80 /* Accessing a corrupted shared library */
+#define TARGET_ELIBSCN 81 /* .lib section in a.out corrupted */
+#define TARGET_ELIBMAX 82 /* Attempting to link in too many shared libraries */
+#define TARGET_ELIBEXEC 83 /* Cannot exec a shared library directly */
+#define TARGET_EILSEQ 84 /* Illegal byte sequence */
+#define TARGET_ERESTART 85 /* Interrupted system call should be restarted */
+#define TARGET_ESTRPIPE 86 /* Streams pipe error */
+#define TARGET_EUSERS 87 /* Too many users */
+#define TARGET_ENOTSOCK 88 /* Socket operation on non-socket */
+#define TARGET_EDESTADDRREQ 89 /* Destination address required */
+#define TARGET_EMSGSIZE 90 /* Message too long */
+#define TARGET_EPROTOTYPE 91 /* Protocol wrong type for socket */
+#define TARGET_ENOPROTOOPT 92 /* Protocol not available */
+#define TARGET_EPROTONOSUPPORT 93 /* Protocol not supported */
+#define TARGET_ESOCKTNOSUPPORT 94 /* Socket type not supported */
+#define TARGET_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define TARGET_EPFNOSUPPORT 96 /* Protocol family not supported */
+#define TARGET_EAFNOSUPPORT 97 /* Address family not supported by protocol */
+#define TARGET_EADDRINUSE 98 /* Address already in use */
+#define TARGET_EADDRNOTAVAIL 99 /* Cannot assign requested address */
+#define TARGET_ENETDOWN 100 /* Network is down */
+#define TARGET_ENETUNREACH 101 /* Network is unreachable */
+#define TARGET_ENETRESET 102 /* Network dropped connection because of reset */
+#define TARGET_ECONNABORTED 103 /* Software caused connection abort */
+#define TARGET_ECONNRESET 104 /* Connection reset by peer */
+#define TARGET_ENOBUFS 105 /* No buffer space available */
+#define TARGET_EISCONN 106 /* Transport endpoint is already connected */
+#define TARGET_ENOTCONN 107 /* Transport endpoint is not connected */
+#define TARGET_ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
+#define TARGET_ETOOMANYREFS 109 /* Too many references: cannot splice */
+#define TARGET_ETIMEDOUT 110 /* Connection timed out */
+#define TARGET_ECONNREFUSED 111 /* Connection refused */
+#define TARGET_EHOSTDOWN 112 /* Host is down */
+#define TARGET_EHOSTUNREACH 113 /* No route to host */
+#define TARGET_EALREADY 114 /* Operation already in progress */
+#define TARGET_EINPROGRESS 115 /* Operation now in progress */
+#define TARGET_ESTALE 116 /* Stale NFS file handle */
+#define TARGET_EUCLEAN 117 /* Structure needs cleaning */
+#define TARGET_ENOTNAM 118 /* Not a XENIX named type file */
+#define TARGET_ENAVAIL 119 /* No XENIX semaphores available */
+#define TARGET_EISNAM 120 /* Is a named type file */
+#define TARGET_EREMOTEIO 121 /* Remote I/O error */
+#define TARGET_EDQUOT 122 /* Quota exceeded */
+
+#define TARGET_ENOMEDIUM 123 /* No medium found */
+#define TARGET_EMEDIUMTYPE 124 /* Wrong medium type */
+#define TARGET_ECANCELED 125 /* Operation Canceled */
+#define TARGET_ENOKEY 126 /* Required key not available */
+#define TARGET_EKEYEXPIRED 127 /* Key has expired */
+#define TARGET_EKEYREVOKED 128 /* Key has been revoked */
+#define TARGET_EKEYREJECTED 129 /* Key was rejected by service */
+
+/* for robust mutexes */
+#define TARGET_EOWNERDEAD 130 /* Owner died */
+#define TARGET_ENOTRECOVERABLE 131 /* State not recoverable */
+
+#define TARGET_ERFKILL 132 /* Operation not possible due to RF-kill */
+#define TARGET_EHWPOISON 133 /* Memory page has hardware error */
+
+/* QEMU internal, not visible to the guest. This is returned when a
+ * system call should be restarted, to tell the main loop that it
+ * should wind the guest PC backwards so it will re-execute the syscall
+ * after handling any pending signals. They match with the ones the guest
+ * kernel uses for the same purpose.
+ */
+#define TARGET_ERESTARTSYS 512 /* Restart system call (if SA_RESTART) */
+
+/* QEMU internal, not visible to the guest. This is returned by the
+ * do_sigreturn() code after a successful sigreturn syscall, to indicate
+ * that it has correctly set the guest registers and so the main loop
+ * should not touch them. We use the value the guest would use for
+ * ERESTART_NOINTR (which is kernel internal) to guarantee that we won't
+ * clash with a valid guest errno now or in the future.
+ */
+#define TARGET_QEMU_ESIGRETURN 513 /* Return from signal */
+
+#endif
--- /dev/null
+#ifndef HEXAGON_TARGET_ERRNO_DEFS_H
+#define HEXAGON_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef HPPA_TARGET_ERRNO_DEFS_H
+#define HPPA_TARGET_ERRNO_DEFS_H
+
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef I386_TARGET_ERRNO_DEFS_H
+#define I386_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef M68K_TARGET_ERRNO_DEFS_H
+#define M68K_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef MICROBLAZE_TARGET_ERRNO_DEFS_H
+#define MICROBLAZE_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef MIPS_TARGET_ERRNO_DEFS_H
+#define MIPS_TARGET_ERRNO_DEFS_H
+
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef MIPS64_TARGET_ERRNO_DEFS_H
+#define MIPS64_TARGET_ERRNO_DEFS_H
+
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef NIOS2_TARGET_ERRNO_DEFS_H
+#define NIOS2_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef OR1K_TARGET_ERRNO_DEFS_H
+#define OR1K_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef PPC_TARGET_ERRNO_DEFS_H
+#define PPC_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef RISCV_TARGET_ERRNO_DEFS_H
+#define RISCV_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef S390X_TARGET_ERRNO_DEFS_H
+#define S390X_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
*/
#include "hostdep.h"
-#include "errno_defs.h"
+#include "target_errno_defs.h"
/* We have the correct host directory on our include path
* so that this will pull in the right fragment for the architecture.
--- /dev/null
+#ifndef SH4_TARGET_ERRNO_DEFS_H
+#define SH4_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
#ifndef SPARC_TARGET_ERRNO_DEFS_H
#define SPARC_TARGET_ERRNO_DEFS_H
-/* Target errno definitions taken from asm-sparc/errno.h */
+#include "../generic/target_errno_defs.h"
+
+/*
+ * Generic target errno overridden with definitions taken
+ * from asm-sparc/errno.h
+ */
#undef TARGET_EWOULDBLOCK
#define TARGET_EWOULDBLOCK TARGET_EAGAIN /* Operation would block */
#undef TARGET_EINPROGRESS
#ifndef SPARC_TARGET_SYSCALL_H
#define SPARC_TARGET_SYSCALL_H
-#include "target_errno_defs.h"
-
#if defined(TARGET_SPARC64) && !defined(TARGET_ABI32)
struct target_pt_regs {
abi_ulong u_regs[16];
#include "socket.h"
-#include "errno_defs.h"
+#include "target_errno_defs.h"
#define FUTEX_WAIT 0
#define FUTEX_WAKE 1
--- /dev/null
+#ifndef X86_64_TARGET_ERRNO_DEFS_H
+#define X86_64_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
--- /dev/null
+#ifndef XTENSA_TARGET_ERRNO_DEFS_H
+#define XTENSA_TARGET_ERRNO_DEFS_H
+
+/* Target uses generic errno */
+#include "../generic/target_errno_defs.h"
+
+#endif
projects / mirror_qemu.git / commitdiff