cmd/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = cmd
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/config/kernel-ctl-table-name.m4 \
  41         $(top_srcdir)/config/kernel-fallocate.m4 \
  42         $(top_srcdir)/config/kernel-group-info.m4 \
  43         $(top_srcdir)/config/kernel-inode-lock.m4 \
  44         $(top_srcdir)/config/kernel-kmem-cache.m4 \
  45         $(top_srcdir)/config/kernel-kuidgid.m4 \
  46         $(top_srcdir)/config/kernel-pde-data.m4 \
  47         $(top_srcdir)/config/kernel-rw.m4 \
  48         $(top_srcdir)/config/kernel-rwsem.m4 \
  49         $(top_srcdir)/config/kernel-sched.m4 \
  50         $(top_srcdir)/config/kernel-set-fs-pwd.m4 \
  51         $(top_srcdir)/config/kernel-shrinker.m4 \
  52         $(top_srcdir)/config/kernel-spinlock.m4 \
  53         $(top_srcdir)/config/kernel-timer.m4 \
  54         $(top_srcdir)/config/kernel-trim-unused-symbols.m4 \
  55         $(top_srcdir)/config/kernel-truncate-range.m4 \
  56         $(top_srcdir)/config/kernel-urange-sleep.m4 \
  57         $(top_srcdir)/config/kernel-vfs-fsync.m4 \
  58         $(top_srcdir)/config/kernel-vfs-getattr.m4 \
  59         $(top_srcdir)/config/kernel-wait.m4 \
  60         $(top_srcdir)/config/kernel-zlib.m4 \
  61         $(top_srcdir)/config/libtool.m4 \
  62         $(top_srcdir)/config/ltoptions.m4 \
  63         $(top_srcdir)/config/ltsugar.m4 \
  64         $(top_srcdir)/config/ltversion.m4 \
  65         $(top_srcdir)/config/lt~obsolete.m4 \
  66         $(top_srcdir)/config/spl-build.m4 \
  67         $(top_srcdir)/config/spl-meta.m4 $(top_srcdir)/configure.ac
  68 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  69         $(ACLOCAL_M4)
  70 mkinstalldirs = $(install_sh) -d
  71 CONFIG_HEADER = $(top_builddir)/spl_config.h
  72 CONFIG_CLEAN_FILES =
  73 CONFIG_CLEAN_VPATH_FILES =
  74 AM_V_GEN = $(am__v_GEN_$(V))
  75 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  76 am__v_GEN_0 = @echo "  GEN   " $@;
  77 AM_V_at = $(am__v_at_$(V))
  78 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  79 am__v_at_0 = @
  80 SOURCES =
  81 DIST_SOURCES =
  82 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  83         html-recursive info-recursive install-data-recursive \
  84         install-dvi-recursive install-exec-recursive \
  85         install-html-recursive install-info-recursive \
  86         install-pdf-recursive install-ps-recursive install-recursive \
  87         installcheck-recursive installdirs-recursive pdf-recursive \
  88         ps-recursive uninstall-recursive
  89 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  90   distclean-recursive maintainer-clean-recursive
  91 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  92         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  93         distdir
  94 ETAGS = etags
  95 CTAGS = ctags
  96 DIST_SUBDIRS = $(SUBDIRS)
  97 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  98 am__relativize = \
  99   dir0=`pwd`; \
 100   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 101   sed_rest='s,^[^/]*/*,,'; \
 102   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 103   sed_butlast='s,/*[^/]*$$,,'; \
 104   while test -n "$$dir1"; do \
 105     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 106     if test "$$first" != "."; then \
 107       if test "$$first" = ".."; then \
 108         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 109         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 110       else \
 111         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 112         if test "$$first2" = "$$first"; then \
 113           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 114         else \
 115           dir2="../$$dir2"; \
 116         fi; \
 117         dir0="$$dir0"/"$$first"; \
 118       fi; \
 119     fi; \
 120     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 121   done; \
 122   reldir="$$dir2"
 123 ACLOCAL = @ACLOCAL@
 124 ALIEN = @ALIEN@
 125 ALIEN_VERSION = @ALIEN_VERSION@
 126 AMTAR = @AMTAR@
 127 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 128 AR = @AR@
 129 AUTOCONF = @AUTOCONF@
 130 AUTOHEADER = @AUTOHEADER@
 131 AUTOMAKE = @AUTOMAKE@
 132 AWK = @AWK@
 133 CC = @CC@
 134 CCDEPMODE = @CCDEPMODE@
 135 CFLAGS = @CFLAGS@
 136 CPP = @CPP@
 137 CPPFLAGS = @CPPFLAGS@
 138 CYGPATH_W = @CYGPATH_W@
 139 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 140 DEBUG_KMEM = @DEBUG_KMEM@
 141 DEBUG_KMEM_TRACKING = @DEBUG_KMEM_TRACKING@
 142 DEBUG_SPL = @DEBUG_SPL@
 143 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 144 DEFS = @DEFS@
 145 DEPDIR = @DEPDIR@
 146 DPKG = @DPKG@
 147 DPKGBUILD = @DPKGBUILD@
 148 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 149 DPKG_VERSION = @DPKG_VERSION@
 150 DSYMUTIL = @DSYMUTIL@
 151 DUMPBIN = @DUMPBIN@
 152 ECHO_C = @ECHO_C@
 153 ECHO_N = @ECHO_N@
 154 ECHO_T = @ECHO_T@
 155 EGREP = @EGREP@
 156 EXEEXT = @EXEEXT@
 157 FGREP = @FGREP@
 158 GREP = @GREP@
 159 HAVE_ALIEN = @HAVE_ALIEN@
 160 HAVE_DPKG = @HAVE_DPKG@
 161 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 162 HAVE_RPM = @HAVE_RPM@
 163 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 164 INSTALL = @INSTALL@
 165 INSTALL_DATA = @INSTALL_DATA@
 166 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 167 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 168 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 169 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 170 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 171 LD = @LD@
 172 LDFLAGS = @LDFLAGS@
 173 LIBOBJS = @LIBOBJS@
 174 LIBS = @LIBS@
 175 LIBTOOL = @LIBTOOL@
 176 LINUX = @LINUX@
 177 LINUX_OBJ = @LINUX_OBJ@
 178 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 179 LINUX_VERSION = @LINUX_VERSION@
 180 LIPO = @LIPO@
 181 LN_S = @LN_S@
 182 LTLIBOBJS = @LTLIBOBJS@
 183 MAINT = @MAINT@
 184 MAKEINFO = @MAKEINFO@
 185 MKDIR_P = @MKDIR_P@
 186 NM = @NM@
 187 NMEDIT = @NMEDIT@
 188 OBJDUMP = @OBJDUMP@
 189 OBJEXT = @OBJEXT@
 190 OTOOL = @OTOOL@
 191 OTOOL64 = @OTOOL64@
 192 PACKAGE = @PACKAGE@
 193 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 194 PACKAGE_NAME = @PACKAGE_NAME@
 195 PACKAGE_STRING = @PACKAGE_STRING@
 196 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 197 PACKAGE_VERSION = @PACKAGE_VERSION@
 198 PATH_SEPARATOR = @PATH_SEPARATOR@
 199 RANLIB = @RANLIB@
 200 RELEASE = @RELEASE@
 201 RPM = @RPM@
 202 RPMBUILD = @RPMBUILD@
 203 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 204 RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
 205 RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
 206 RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
 207 RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
 208 RPM_SPEC_DIR = @RPM_SPEC_DIR@
 209 RPM_VERSION = @RPM_VERSION@
 210 SED = @SED@
 211 SET_MAKE = @SET_MAKE@
 212 SHELL = @SHELL@
 213 SPL_CONFIG = @SPL_CONFIG@
 214 SPL_META_ALIAS = @SPL_META_ALIAS@
 215 SPL_META_AUTHOR = @SPL_META_AUTHOR@
 216 SPL_META_DATA = @SPL_META_DATA@
 217 SPL_META_LICENSE = @SPL_META_LICENSE@
 218 SPL_META_LT_AGE = @SPL_META_LT_AGE@
 219 SPL_META_LT_CURRENT = @SPL_META_LT_CURRENT@
 220 SPL_META_LT_REVISION = @SPL_META_LT_REVISION@
 221 SPL_META_NAME = @SPL_META_NAME@
 222 SPL_META_RELEASE = @SPL_META_RELEASE@
 223 SPL_META_VERSION = @SPL_META_VERSION@
 224 SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
 225 SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
 226 SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
 227 SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
 228 STRIP = @STRIP@
 229 VENDOR = @VENDOR@
 230 VERSION = @VERSION@
 231 abs_builddir = @abs_builddir@
 232 abs_srcdir = @abs_srcdir@
 233 abs_top_builddir = @abs_top_builddir@
 234 abs_top_srcdir = @abs_top_srcdir@
 235 ac_ct_CC = @ac_ct_CC@
 236 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 237 am__include = @am__include@
 238 am__leading_dot = @am__leading_dot@
 239 am__quote = @am__quote@
 240 am__tar = @am__tar@
 241 am__untar = @am__untar@
 242 bindir = @bindir@
 243 build = @build@
 244 build_alias = @build_alias@
 245 build_cpu = @build_cpu@
 246 build_os = @build_os@
 247 build_vendor = @build_vendor@
 248 builddir = @builddir@
 249 datadir = @datadir@
 250 datarootdir = @datarootdir@
 251 docdir = @docdir@
 252 dvidir = @dvidir@
 253 exec_prefix = @exec_prefix@
 254 host = @host@
 255 host_alias = @host_alias@
 256 host_cpu = @host_cpu@
 257 host_os = @host_os@
 258 host_vendor = @host_vendor@
 259 htmldir = @htmldir@
 260 includedir = @includedir@
 261 infodir = @infodir@
 262 install_sh = @install_sh@
 263 libdir = @libdir@
 264 libexecdir = @libexecdir@
 265 localedir = @localedir@
 266 localstatedir = @localstatedir@
 267 lt_ECHO = @lt_ECHO@
 268 mandir = @mandir@
 269 mkdir_p = @mkdir_p@
 270 oldincludedir = @oldincludedir@
 271 pdfdir = @pdfdir@
 272 prefix = @prefix@
 273 program_transform_name = @program_transform_name@
 274 psdir = @psdir@
 275 sbindir = @sbindir@
 276 sharedstatedir = @sharedstatedir@
 277 srcdir = @srcdir@
 278 sysconfdir = @sysconfdir@
 279 target = @target@
 280 target_alias = @target_alias@
 281 target_cpu = @target_cpu@
 282 target_os = @target_os@
 283 target_vendor = @target_vendor@
 284 top_build_prefix = @top_build_prefix@
 285 top_builddir = @top_builddir@
 286 top_srcdir = @top_srcdir@
 287 SUBDIRS = splat splslab
 288 all: all-recursive
 289
 290 .SUFFIXES:
 291 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 292         @for dep in $?; do \
 293           case '$(am__configure_deps)' in \
 294             *$$dep*) \
 295               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 296                 && { if test -f $@; then exit 0; else break; fi; }; \
 297               exit 1;; \
 298           esac; \
 299         done; \
 300         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/Makefile'; \
 301         $(am__cd) $(top_srcdir) && \
 302           $(AUTOMAKE) --gnu cmd/Makefile
 303 .PRECIOUS: Makefile
 304 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 305         @case '$?' in \
 306           *config.status*) \
 307             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 308           *) \
 309             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 310             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 311         esac;
 312
 313 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 314         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 315
 316 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 317         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 318 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 319         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 320 $(am__aclocal_m4_deps):
 321
 322 mostlyclean-libtool:
 323         -rm -f *.lo
 324
 325 clean-libtool:
 326         -rm -rf .libs _libs
 327
 328 # This directory's subdirectories are mostly independent; you can cd
 329 # into them and run `make' without going through this Makefile.
 330 # To change the values of `make' variables: instead of editing Makefiles,
 331 # (1) if the variable is set in `config.status', edit `config.status'
 332 #     (which will cause the Makefiles to be regenerated when you run `make');
 333 # (2) otherwise, pass the desired values on the `make' command line.
 334 $(RECURSIVE_TARGETS):
 335         @fail= failcom='exit 1'; \
 336         for f in x $$MAKEFLAGS; do \
 337           case $$f in \
 338             *=* | --[!k]*);; \
 339             *k*) failcom='fail=yes';; \
 340           esac; \
 341         done; \
 342         dot_seen=no; \
 343         target=`echo $@ | sed s/-recursive//`; \
 344         list='$(SUBDIRS)'; for subdir in $$list; do \
 345           echo "Making $$target in $$subdir"; \
 346           if test "$$subdir" = "."; then \
 347             dot_seen=yes; \
 348             local_target="$$target-am"; \
 349           else \
 350             local_target="$$target"; \
 351           fi; \
 352           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 353           || eval $$failcom; \
 354         done; \
 355         if test "$$dot_seen" = "no"; then \
 356           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 357         fi; test -z "$$fail"
 358
 359 $(RECURSIVE_CLEAN_TARGETS):
 360         @fail= failcom='exit 1'; \
 361         for f in x $$MAKEFLAGS; do \
 362           case $$f in \
 363             *=* | --[!k]*);; \
 364             *k*) failcom='fail=yes';; \
 365           esac; \
 366         done; \
 367         dot_seen=no; \
 368         case "$@" in \
 369           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 370           *) list='$(SUBDIRS)' ;; \
 371         esac; \
 372         rev=''; for subdir in $$list; do \
 373           if test "$$subdir" = "."; then :; else \
 374             rev="$$subdir $$rev"; \
 375           fi; \
 376         done; \
 377         rev="$$rev ."; \
 378         target=`echo $@ | sed s/-recursive//`; \
 379         for subdir in $$rev; do \
 380           echo "Making $$target in $$subdir"; \
 381           if test "$$subdir" = "."; then \
 382             local_target="$$target-am"; \
 383           else \
 384             local_target="$$target"; \
 385           fi; \
 386           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 387           || eval $$failcom; \
 388         done && test -z "$$fail"
 389 tags-recursive:
 390         list='$(SUBDIRS)'; for subdir in $$list; do \
 391           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 392         done
 393 ctags-recursive:
 394         list='$(SUBDIRS)'; for subdir in $$list; do \
 395           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 396         done
 397
 398 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 399         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 400         unique=`for i in $$list; do \
 401             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 402           done | \
 403           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 404               END { if (nonempty) { for (i in files) print i; }; }'`; \
 405         mkid -fID $$unique
 406 tags: TAGS
 407
 408 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 409                 $(TAGS_FILES) $(LISP)
 410         set x; \
 411         here=`pwd`; \
 412         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 413           include_option=--etags-include; \
 414           empty_fix=.; \
 415         else \
 416           include_option=--include; \
 417           empty_fix=; \
 418         fi; \
 419         list='$(SUBDIRS)'; for subdir in $$list; do \
 420           if test "$$subdir" = .; then :; else \
 421             test ! -f $$subdir/TAGS || \
 422               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 423           fi; \
 424         done; \
 425         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 426         unique=`for i in $$list; do \
 427             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 428           done | \
 429           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 430               END { if (nonempty) { for (i in files) print i; }; }'`; \
 431         shift; \
 432         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 433           test -n "$$unique" || unique=$$empty_fix; \
 434           if test $$# -gt 0; then \
 435             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 436               "$$@" $$unique; \
 437           else \
 438             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 439               $$unique; \
 440           fi; \
 441         fi
 442 ctags: CTAGS
 443 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 444                 $(TAGS_FILES) $(LISP)
 445         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 446         unique=`for i in $$list; do \
 447             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 448           done | \
 449           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 450               END { if (nonempty) { for (i in files) print i; }; }'`; \
 451         test -z "$(CTAGS_ARGS)$$unique" \
 452           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 453              $$unique
 454
 455 GTAGS:
 456         here=`$(am__cd) $(top_builddir) && pwd` \
 457           && $(am__cd) $(top_srcdir) \
 458           && gtags -i $(GTAGS_ARGS) "$$here"
 459
 460 distclean-tags:
 461         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 462
 463 distdir: $(DISTFILES)
 464         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 465         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 466         list='$(DISTFILES)'; \
 467           dist_files=`for file in $$list; do echo $$file; done | \
 468           sed -e "s|^$$srcdirstrip/||;t" \
 469               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 470         case $$dist_files in \
 471           */*) $(MKDIR_P) `echo "$$dist_files" | \
 472                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 473                            sort -u` ;; \
 474         esac; \
 475         for file in $$dist_files; do \
 476           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 477           if test -d $$d/$$file; then \
 478             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 479             if test -d "$(distdir)/$$file"; then \
 480               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 481             fi; \
 482             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 483               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 484               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 485             fi; \
 486             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 487           else \
 488             test -f "$(distdir)/$$file" \
 489             || cp -p $$d/$$file "$(distdir)/$$file" \
 490             || exit 1; \
 491           fi; \
 492         done
 493         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 494           if test "$$subdir" = .; then :; else \
 495             test -d "$(distdir)/$$subdir" \
 496             || $(MKDIR_P) "$(distdir)/$$subdir" \
 497             || exit 1; \
 498           fi; \
 499         done
 500         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 501           if test "$$subdir" = .; then :; else \
 502             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 503             $(am__relativize); \
 504             new_distdir=$$reldir; \
 505             dir1=$$subdir; dir2="$(top_distdir)"; \
 506             $(am__relativize); \
 507             new_top_distdir=$$reldir; \
 508             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 509             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 510             ($(am__cd) $$subdir && \
 511               $(MAKE) $(AM_MAKEFLAGS) \
 512                 top_distdir="$$new_top_distdir" \
 513                 distdir="$$new_distdir" \
 514                 am__remove_distdir=: \
 515                 am__skip_length_check=: \
 516                 am__skip_mode_fix=: \
 517                 distdir) \
 518               || exit 1; \
 519           fi; \
 520         done
 521 check-am: all-am
 522 check: check-recursive
 523 all-am: Makefile
 524 installdirs: installdirs-recursive
 525 installdirs-am:
 526 install: install-recursive
 527 install-exec: install-exec-recursive
 528 install-data: install-data-recursive
 529 uninstall: uninstall-recursive
 530
 531 install-am: all-am
 532         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 533
 534 installcheck: installcheck-recursive
 535 install-strip:
 536         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 537           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 538           `test -z '$(STRIP)' || \
 539             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 540 mostlyclean-generic:
 541
 542 clean-generic:
 543
 544 distclean-generic:
 545         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 546         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 547
 548 maintainer-clean-generic:
 549         @echo "This command is intended for maintainers to use"
 550         @echo "it deletes files that may require special tools to rebuild."
 551 clean: clean-recursive
 552
 553 clean-am: clean-generic clean-libtool mostlyclean-am
 554
 555 distclean: distclean-recursive
 556         -rm -f Makefile
 557 distclean-am: clean-am distclean-generic distclean-tags
 558
 559 dvi: dvi-recursive
 560
 561 dvi-am:
 562
 563 html: html-recursive
 564
 565 html-am:
 566
 567 info: info-recursive
 568
 569 info-am:
 570
 571 install-data-am:
 572
 573 install-dvi: install-dvi-recursive
 574
 575 install-dvi-am:
 576
 577 install-exec-am:
 578
 579 install-html: install-html-recursive
 580
 581 install-html-am:
 582
 583 install-info: install-info-recursive
 584
 585 install-info-am:
 586
 587 install-man:
 588
 589 install-pdf: install-pdf-recursive
 590
 591 install-pdf-am:
 592
 593 install-ps: install-ps-recursive
 594
 595 install-ps-am:
 596
 597 installcheck-am:
 598
 599 maintainer-clean: maintainer-clean-recursive
 600         -rm -f Makefile
 601 maintainer-clean-am: distclean-am maintainer-clean-generic
 602
 603 mostlyclean: mostlyclean-recursive
 604
 605 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 606
 607 pdf: pdf-recursive
 608
 609 pdf-am:
 610
 611 ps: ps-recursive
 612
 613 ps-am:
 614
 615 uninstall-am:
 616
 617 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 618         install-am install-strip tags-recursive
 619
 620 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 621         all all-am check check-am clean clean-generic clean-libtool \
 622         ctags ctags-recursive distclean distclean-generic \
 623         distclean-libtool distclean-tags distdir dvi dvi-am html \
 624         html-am info info-am install install-am install-data \
 625         install-data-am install-dvi install-dvi-am install-exec \
 626         install-exec-am install-html install-html-am install-info \
 627         install-info-am install-man install-pdf install-pdf-am \
 628         install-ps install-ps-am install-strip installcheck \
 629         installcheck-am installdirs installdirs-am maintainer-clean \
 630         maintainer-clean-generic mostlyclean mostlyclean-generic \
 631         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 632         uninstall uninstall-am
 633
 634
 635 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 636 # Otherwise a system limit (for SysV at least) may be exceeded.
 637 .NOEXPORT: