-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@SET_MAKE@
+###############################################################################
+# Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC.
+# Copyright (C) 2007 The Regents of the University of California.
+# Written by Brian Behlendorf <behlendorf1@llnl.gov>.
+###############################################################################
+# Build targets for RPM packages.
+###############################################################################
+
+###############################################################################
+# Copyright (C) 2010 Lawrence Livermore National Security, LLC.
+# Written by Brian Behlendorf <behlendorf1@llnl.gov>.
+###############################################################################
+# Build targets for DEB packages.
+#
+# Long term native distro specific Debian style packaging should be added.
+# In the short term RPM packages are built and converted to DEB packages
+# using alien. If someone familiar with Debian style packaging were to
+# update the build system to correctly build Debian style packages I would
+# happily take it. Until then we will have to make due with alien.
+#
+###############################################################################
+
+###############################################################################
+# Copyright (C) 2010 Lawrence Livermore National Security, LLC.
+# Written by Brian Behlendorf <behlendorf1@llnl.gov>.
+###############################################################################
+# Build targets for TGZ packages.
+#
+# Long term native distro specific Slackware style packaging should be added.
+# In the short term RPM packages are built and converted to TGZ packages
+# using alien. If someone familiar with Slackware style packaging were to
+# update the build system to correctly build Slackware style packages I would
+# happily take it. Until then we will have to make due with alien.
+#
+###############################################################################
+
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
-DIST_COMMON = $(am__configure_deps) $(noinst_HEADERS) \
+DIST_COMMON = $(am__configure_deps) $(am__extra_HEADERS_DIST) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/spl-modules.spec.in $(srcdir)/spl.spec.in \
- $(srcdir)/spl_config.h.in $(top_srcdir)/config/rpm.am \
- $(top_srcdir)/configure $(top_srcdir)/module/Makefile.in \
+ $(srcdir)/config/deb.am $(srcdir)/config/rpm.am \
+ $(srcdir)/config/tgz.am $(srcdir)/spl.release.in \
+ $(srcdir)/spl_config.h.in $(top_srcdir)/configure \
+ $(top_srcdir)/module/Makefile.in \
$(top_srcdir)/module/spl/Makefile.in \
$(top_srcdir)/module/splat/Makefile.in AUTHORS COPYING \
- ChangeLog INSTALL config/config.guess config/config.sub \
- config/depcomp config/install-sh config/ltmain.sh \
- config/missing
+ config/config.guess config/config.sub config/depcomp \
+ config/install-sh config/ltmain.sh config/missing
+@CONFIG_USER_TRUE@am__append_1 = lib cmd man scripts
+@CONFIG_KERNEL_TRUE@am__append_2 = module
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/config/spl-build.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/config/kernel-ctl-table-name.m4 \
+ $(top_srcdir)/config/kernel-fallocate.m4 \
+ $(top_srcdir)/config/kernel-group-info.m4 \
+ $(top_srcdir)/config/kernel-inode-lock.m4 \
+ $(top_srcdir)/config/kernel-inode-times.m4 \
+ $(top_srcdir)/config/kernel-kmem-cache.m4 \
+ $(top_srcdir)/config/kernel-kuidgid.m4 \
+ $(top_srcdir)/config/kernel-pde-data.m4 \
+ $(top_srcdir)/config/kernel-rw.m4 \
+ $(top_srcdir)/config/kernel-rwsem.m4 \
+ $(top_srcdir)/config/kernel-sched.m4 \
+ $(top_srcdir)/config/kernel-set-fs-pwd.m4 \
+ $(top_srcdir)/config/kernel-shrinker.m4 \
+ $(top_srcdir)/config/kernel-spinlock.m4 \
+ $(top_srcdir)/config/kernel-timer.m4 \
+ $(top_srcdir)/config/kernel-trim-unused-symbols.m4 \
+ $(top_srcdir)/config/kernel-truncate-range.m4 \
+ $(top_srcdir)/config/kernel-urange-sleep.m4 \
+ $(top_srcdir)/config/kernel-vfs-fsync.m4 \
+ $(top_srcdir)/config/kernel-vfs-getattr.m4 \
+ $(top_srcdir)/config/kernel-wait.m4 \
+ $(top_srcdir)/config/kernel-zlib.m4 \
+ $(top_srcdir)/config/libtool.m4 \
+ $(top_srcdir)/config/ltoptions.m4 \
+ $(top_srcdir)/config/ltsugar.m4 \
+ $(top_srcdir)/config/ltversion.m4 \
+ $(top_srcdir)/config/lt~obsolete.m4 \
+ $(top_srcdir)/config/spl-build.m4 \
$(top_srcdir)/config/spl-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = spl_config.h
CONFIG_CLEAN_FILES = module/Makefile module/spl/Makefile \
- module/splat/Makefile spl.spec spl-modules.spec
+ module/splat/Makefile spl.release
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-HEADERS = $(noinst_HEADERS)
+am__extra_HEADERS_DIST = spl.release.in spl_config.h.in
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"
+HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = lib cmd scripts module include
+DIST_SUBDIRS = include rpm lib cmd man scripts module
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).zip
+DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
+ALIEN = @ALIEN@
+ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
+DEBUG_CFLAGS = @DEBUG_CFLAGS@
+DEBUG_KMEM = @DEBUG_KMEM@
+DEBUG_KMEM_TRACKING = @DEBUG_KMEM_TRACKING@
+DEBUG_SPL = @DEBUG_SPL@
+DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DPKG = @DPKG@
+DPKGBUILD = @DPKGBUILD@
+DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
+DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
+HAVE_ALIEN = @HAVE_ALIEN@
+HAVE_DPKG = @HAVE_DPKG@
+HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
+HAVE_RPM = @HAVE_RPM@
+HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
-LICENSE = @LICENSE@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
+RELEASE = @RELEASE@
+RPM = @RPM@
+RPMBUILD = @RPMBUILD@
+RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
+RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
+RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
+RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
+RPM_SPEC_DIR = @RPM_SPEC_DIR@
+RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL_META_ALIAS = @SPL_META_ALIAS@
SPL_META_AUTHOR = @SPL_META_AUTHOR@
SPL_META_DATA = @SPL_META_DATA@
+SPL_META_LICENSE = @SPL_META_LICENSE@
SPL_META_LT_AGE = @SPL_META_LT_AGE@
SPL_META_LT_CURRENT = @SPL_META_LT_CURRENT@
SPL_META_LT_REVISION = @SPL_META_LT_REVISION@
SPL_META_NAME = @SPL_META_NAME@
SPL_META_RELEASE = @SPL_META_RELEASE@
SPL_META_VERSION = @SPL_META_VERSION@
+SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
+SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
+SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
+SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
STRIP = @STRIP@
+VENDOR = @VENDOR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-@CONFIG_USER_TRUE@USER_DIR = lib cmd scripts
-@CONFIG_KERNEL_TRUE@KERNEL_DIR = module include
-SUBDIRS = $(USER_DIR) $(KERNEL_DIR)
-AUTOMAKE_OPTIONS = foreign dist-zip
-EXTRA_DIST = autogen.sh spl.spec.in config/config.awk META DISCLAIMER
-noinst_HEADERS = spl_config.h
+ACLOCAL_AMFLAGS = -I config
+SUBDIRS = include rpm $(am__append_1) $(am__append_2)
+@CONFIG_KERNEL_TRUE@extradir = @prefix@/src/spl-$(VERSION)
+@CONFIG_KERNEL_TRUE@extra_HEADERS = spl.release.in spl_config.h.in
+@CONFIG_KERNEL_TRUE@kerneldir = @prefix@/src/spl-$(VERSION)/$(LINUX_VERSION)
+@CONFIG_KERNEL_TRUE@nodist_kernel_HEADERS = spl.release spl_config.h module/$(LINUX_SYMBOLS)
+AUTOMAKE_OPTIONS = foreign
+EXTRA_DIST = autogen.sh META DISCLAIMER copy-builtin config/config.awk \
+ config/rpm.am config/deb.am config/tgz.am
all: spl_config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/rpm.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(SHELL) ./config.status $@
module/splat/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/splat/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
-spl.spec: $(top_builddir)/config.status $(srcdir)/spl.spec.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-spl-modules.spec: $(top_builddir)/config.status $(srcdir)/spl-modules.spec.in
+spl.release: $(top_builddir)/config.status $(srcdir)/spl.release.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
distclean-libtool:
-rm -f libtool config.lt
+install-extraHEADERS: $(extra_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(extradir)" || $(MKDIR_P) "$(DESTDIR)$(extradir)"
+ @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \
+ done
+
+uninstall-extraHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(extradir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(extradir)" && rm -f $$files
+install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
+ @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
+ done
+
+uninstall-nodist_kernelHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(kerneldir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(kerneldir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
|| exit 1; \
fi; \
done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
-test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
+
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
all-am: Makefile $(HEADERS) spl_config.h
installdirs: installdirs-recursive
installdirs-am:
+ for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-@CONFIG_KERNEL_FALSE@install-data-local:
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
info-am:
-install-data-am: install-data-local
+install-data-am: install-extraHEADERS install-nodist_kernelHEADERS
install-dvi: install-dvi-recursive
ps-am:
-uninstall-am:
+uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
- distcheck distclean distclean-generic distclean-hdr \
+ dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
- install-data-am install-data-local install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-extraHEADERS install-html \
+ install-html-am install-info install-info-am install-man \
+ install-nodist_kernelHEADERS install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-extraHEADERS \
+ uninstall-nodist_kernelHEADERS
+
+
+srpm-kmod:
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
+ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common
+
+srpm-dkms:
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
+ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common
+
+srpm-utils:
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
+ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common
+
+srpm: srpm-kmod srpm-dkms srpm-utils
+srpms: srpm-kmod srpm-dkms srpm-utils
+
+rpm-kmod: srpm-kmod
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
+ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common
+
+rpm-dkms: srpm-dkms
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
+ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common
+
+rpm-utils: srpm-utils
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
+ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common
+
+rpm: rpm-kmod rpm-dkms rpm-utils
+rpms: rpm-kmod rpm-dkms rpm-utils
rpm-local:
+ @(if test "${HAVE_RPMBUILD}" = "no"; then \
+ echo -e "\n" \
+ "*** Required util ${RPMBUILD} missing. Please install the\n" \
+ "*** package for your distribution which provides ${RPMBUILD},\n" \
+ "*** re-run configure, and try again.\n"; \
+ exit 1; \
+ fi; \
mkdir -p $(rpmbuild)/TMP && \
mkdir -p $(rpmbuild)/BUILD && \
mkdir -p $(rpmbuild)/RPMS && \
mkdir -p $(rpmbuild)/SRPMS && \
- mkdir -p $(rpmbuild)/SPECS && cp $(rpmspec) $(rpmbuild)/SPECS && \
- mkdir -p $(rpmbuild)/SOURCES && cp $(distdir).tar.gz $(rpmbuild)/SOURCES
+ mkdir -p $(rpmbuild)/SPECS && \
+ cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \
+ mkdir -p $(rpmbuild)/SOURCES && \
+ cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \
+ cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
srpm-common: dist
- rpmpkg=$(pkg)-$(SPL_META_VERSION)-$(SPL_META_RELEASE).src.rpm; \
+ @(dist=`$(RPM) --eval %{?dist}`; \
+ rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
- /usr/bin/rpmbuild \
+ LANG=C $(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
- --define "build_src_rpm 1" \
- --define "dist %{nil}" \
- --nodeps -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
+ $(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
- $(RM) -R $$rpmbuild
+ rm -R $$rpmbuild)
rpm-common:
- rpmpkg=$(pkg)-$(SPL_META_VERSION)-$(SPL_META_RELEASE).src.rpm; \
+ @(dist=`$(RPM) --eval %{?dist}`; \
+ rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
- /usr/bin/rpmbuild \
+ LANG=C ${RPMBUILD} \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
- --define "dist %{nil}" \
- --define "require_kdir $(LINUX)" \
- --define "require_kobj $(LINUX_OBJ)" \
- --define "require_kver $(LINUX_VERSION)" \
- --nodeps --rebuild $$rpmpkg || exit 1; \
+ $(def) --rebuild $$rpmpkg || exit 1; \
cp $$rpmbuild/RPMS/*/* . || exit 1; \
- $(RM) -R $$rpmbuild
+ rm -R $$rpmbuild)
+
+deb-local:
+ @(if test "${HAVE_DPKGBUILD}" = "no"; then \
+ echo -e "\n" \
+ "*** Required util ${DPKGBUILD} missing. Please install the\n" \
+ "*** package for your distribution which provides ${DPKGBUILD},\n" \
+ "*** re-run configure, and try again.\n"; \
+ exit 1; \
+ fi; \
+ if test "${HAVE_ALIEN}" = "no"; then \
+ echo -e "\n" \
+ "*** Required util ${ALIEN} missing. Please install the\n" \
+ "*** package for your distribution which provides ${ALIEN},\n" \
+ "*** re-run configure, and try again.\n"; \
+ exit 1; \
+ fi)
+
+deb-kmod: deb-local rpm-kmod
+ name=${PACKAGE}; \
+ version=${VERSION}-${RELEASE}; \
+ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
+ debarch=`$(DPKG) --print-architecture`; \
+ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
+ fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1; \
+ $(RM) $$pkg1
+
+deb-dkms: deb-local rpm-dkms
+ name=${PACKAGE}; \
+ version=${VERSION}-${RELEASE}; \
+ arch=`$(RPM) -qp $${name}-dkms-$${version}.src.rpm --qf %{arch} | tail -1`; \
+ debarch=`$(DPKG) --print-architecture`; \
+ pkg1=$${name}-dkms-$${version}.$${arch}.rpm; \
+ fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1; \
+ $(RM) $$pkg1
+
+deb-utils: deb-local rpm-utils
+ name=${PACKAGE}; \
+ version=${VERSION}-${RELEASE}; \
+ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
+ debarch=`$(DPKG) --print-architecture`; \
+ pkg1=$${name}-$${version}.$${arch}.rpm; \
+ fakeroot $(ALIEN) --bump=0 --scripts --to-deb --target=$$debarch $$pkg1; \
+ $(RM) $$pkg1
+
+deb: deb-kmod deb-dkms deb-utils
+
+tgz-local:
+ @(if test "${HAVE_ALIEN}" = "no"; then \
+ echo -e "\n" \
+ "*** Required util ${ALIEN} missing. Please install the\n" \
+ "*** package for your distribution which provides ${ALIEN},\n" \
+ "*** re-run configure, and try again.\n"; \
+ exit 1; \
+ fi)
+
+tgz-kmod: tgz-local rpm-kmod
+@CONFIG_KERNEL_TRUE@ name=${PACKAGE}; \
+@CONFIG_KERNEL_TRUE@ version=${VERSION}-${RELEASE}; \
+@CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
+@CONFIG_KERNEL_TRUE@ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
+@CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
+@CONFIG_KERNEL_TRUE@ $(RM) $$pkg1
+
+tgz-utils: tgz-local rpm-utils
+@CONFIG_USER_TRUE@ name=${PACKAGE}; \
+@CONFIG_USER_TRUE@ version=${VERSION}-${RELEASE}; \
+@CONFIG_USER_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
+@CONFIG_USER_TRUE@ pkg1=$${name}-$${version}.$${arch}.rpm; \
+@CONFIG_USER_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
+@CONFIG_USER_TRUE@ $(RM) $$pkg1
+
+tgz: tgz-kmod tgz-utils
distclean-local::
-$(RM) -R autom4te*.cache
-o -name '*.order' -o -name '*.markers' \) \
-type f -print | xargs $(RM)
-@CONFIG_KERNEL_TRUE@install-data-local:
-@CONFIG_KERNEL_TRUE@ destname=spl-$(SPL_META_VERSION)/$(LINUX_VERSION); \
-@CONFIG_KERNEL_TRUE@ instdest=$(DESTDIR)/${prefix}/src/$$destname; \
-@CONFIG_KERNEL_TRUE@ echo "${SPL_META_VERSION}" >$$instdest/spl.release; \
-@CONFIG_KERNEL_TRUE@ for instfile in $(noinst_HEADERS) module/$(LINUX_SYMBOLS); do \
-@CONFIG_KERNEL_TRUE@ $(INSTALL) -D $$instfile $$instdest/$$instfile; \
-@CONFIG_KERNEL_TRUE@ done
+dist-hook:
+ sed -i 's/Release:[[:print:]]*/Release: $(RELEASE)/' \
+ $(distdir)/META
ctags:
- $(RM) $(top_srcdir)/tags
+ $(RM) tags
find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
etags:
- $(RM) $(top_srcdir)/TAGS
+ $(RM) TAGS
find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
tags: ctags etags
-srpm-modules:
- $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" srpm-common
-
-srpm-utils:
- $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" srpm-common
-
-srpm: srpm-modules srpm-utils
-
-rpm-modules: srpm-modules
- $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" rpm-common
-
-rpm-utils: srpm-utils
- $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" rpm-common
-
-rpm-modules: srpm-modules
-
-rpm-utils: srpm-utils
-
-rpm: rpm-modules rpm-utils
+pkg: @DEFAULT_PACKAGE@
+pkg-dkms: @DEFAULT_PACKAGE@-dkms
+pkg-kmod: @DEFAULT_PACKAGE@-kmod
+pkg-utils: @DEFAULT_PACKAGE@-utils
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
projects / mirror_spl-debian.git / blobdiff