-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
###############################################################################
-# Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
+# Copyright (C) 2007-2013 Lawrence Livermore National Security, LLC.
# Copyright (C) 2007 The Regents of the University of California.
# Written by Brian Behlendorf <behlendorf1@llnl.gov>.
###############################################################################
#
###############################################################################
-###############################################################################
-# Written by Prakash Surya <surya1@llnl.gov>
-###############################################################################
-# Build targets for RPM packages.
-###############################################################################
-
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
-DIST_COMMON = $(am__configure_deps) $(noinst_HEADERS) \
+DIST_COMMON = $(am__configure_deps) $(am__extra_HEADERS_DIST) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/PKGBUILD-spl-modules.in $(srcdir)/PKGBUILD-spl.in \
- $(srcdir)/dkms.conf.in $(srcdir)/spl-modules.spec.in \
- $(srcdir)/spl.release.in $(srcdir)/spl.spec.in \
- $(srcdir)/spl_config.h.in $(top_srcdir)/config/arch.am \
- $(top_srcdir)/config/deb.am $(top_srcdir)/config/rpm.am \
- $(top_srcdir)/config/tgz.am $(top_srcdir)/configure \
+ $(srcdir)/config/deb.am $(srcdir)/config/rpm.am \
+ $(srcdir)/config/tgz.am $(srcdir)/spl.release.in \
+ $(srcdir)/spl_config.h.in $(top_srcdir)/configure \
$(top_srcdir)/module/Makefile.in \
$(top_srcdir)/module/spl/Makefile.in \
$(top_srcdir)/module/splat/Makefile.in AUTHORS COPYING \
- ChangeLog INSTALL config/config.guess config/config.sub \
- config/depcomp config/install-sh config/ltmain.sh \
- config/missing
+ config/config.guess config/config.sub config/depcomp \
+ config/install-sh config/ltmain.sh config/missing
+@CONFIG_USER_TRUE@am__append_1 = lib cmd man scripts
+@CONFIG_KERNEL_TRUE@am__append_2 = module
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/config/spl-build.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/config/libtool.m4 \
+ $(top_srcdir)/config/ltoptions.m4 \
+ $(top_srcdir)/config/ltsugar.m4 \
+ $(top_srcdir)/config/ltversion.m4 \
+ $(top_srcdir)/config/lt~obsolete.m4 \
+ $(top_srcdir)/config/spl-build.m4 \
$(top_srcdir)/config/spl-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = spl_config.h
CONFIG_CLEAN_FILES = module/Makefile module/spl/Makefile \
- module/splat/Makefile spl.spec spl-modules.spec PKGBUILD-spl \
- PKGBUILD-spl-modules spl.release dkms.conf
+ module/splat/Makefile spl.release
CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
-HEADERS = $(noinst_HEADERS)
+am__extra_HEADERS_DIST = spl.release.in spl_config.h.in
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"
+HEADERS = $(extra_HEADERS) $(nodist_kernel_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = lib cmd scripts module include
+DIST_SUBDIRS = include rpm lib cmd man scripts module
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_KMEM = @DEBUG_KMEM@
DEBUG_KMEM_TRACKING = @DEBUG_KMEM_TRACKING@
-DEBUG_LOG = @DEBUG_LOG@
DEBUG_SPL = @DEBUG_SPL@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
-HAVE_MAKEPKG = @HAVE_MAKEPKG@
-HAVE_PACMAN = @HAVE_PACMAN@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
-LICENSE = @LICENSE@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
-MAKEPKG = @MAKEPKG@
-MAKEPKG_VERSION = @MAKEPKG_VERSION@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
-PACMAN = @PACMAN@
-PACMAN_VERSION = @PACMAN_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
+RELEASE = @RELEASE@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
+RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
+RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
+RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
+RPM_SPEC_DIR = @RPM_SPEC_DIR@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SPL_META_ALIAS = @SPL_META_ALIAS@
SPL_META_AUTHOR = @SPL_META_AUTHOR@
SPL_META_DATA = @SPL_META_DATA@
+SPL_META_LICENSE = @SPL_META_LICENSE@
SPL_META_LT_AGE = @SPL_META_LT_AGE@
SPL_META_LT_CURRENT = @SPL_META_LT_CURRENT@
SPL_META_LT_REVISION = @SPL_META_LT_REVISION@
SPL_META_NAME = @SPL_META_NAME@
SPL_META_RELEASE = @SPL_META_RELEASE@
SPL_META_VERSION = @SPL_META_VERSION@
+SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
+SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
+SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
+SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
STRIP = @STRIP@
VENDOR = @VENDOR@
VERSION = @VERSION@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-@CONFIG_USER_TRUE@USER_DIR = lib cmd scripts
-@CONFIG_KERNEL_TRUE@KERNEL_DIR = module include
-SUBDIRS = $(USER_DIR) $(KERNEL_DIR)
+ACLOCAL_AMFLAGS = -I config
+SUBDIRS = include rpm $(am__append_1) $(am__append_2)
+@CONFIG_KERNEL_TRUE@extradir = @prefix@/src/spl-$(VERSION)
+@CONFIG_KERNEL_TRUE@extra_HEADERS = spl.release.in spl_config.h.in
+@CONFIG_KERNEL_TRUE@kerneldir = @prefix@/src/spl-$(VERSION)/$(LINUX_VERSION)
+@CONFIG_KERNEL_TRUE@nodist_kernel_HEADERS = spl.release spl_config.h module/$(LINUX_SYMBOLS)
AUTOMAKE_OPTIONS = foreign
-EXTRA_DIST = autogen.sh spl.spec.in spl-modules.spec.in META \
- DISCLAIMER config/config.awk config/rpm.am config/deb.am \
- config/tgz.am dkms.postinst
-noinst_HEADERS = spl_config.h spl.release
+EXTRA_DIST = autogen.sh META DISCLAIMER copy-builtin config/config.awk \
+ config/rpm.am config/deb.am config/tgz.am
all: spl_config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-am--refresh:
+am--refresh: Makefile
@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/rpm.am $(top_srcdir)/config/deb.am $(top_srcdir)/config/tgz.am $(top_srcdir)/config/arch.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
+$(srcdir)/config/rpm.am $(srcdir)/config/deb.am $(srcdir)/config/tgz.am:
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(am__aclocal_m4_deps):
spl_config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
- else :; fi
+ @if test ! -f $@; then rm -f stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/spl_config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status $@
module/splat/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/splat/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
-spl.spec: $(top_builddir)/config.status $(srcdir)/spl.spec.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-spl-modules.spec: $(top_builddir)/config.status $(srcdir)/spl-modules.spec.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-PKGBUILD-spl: $(top_builddir)/config.status $(srcdir)/PKGBUILD-spl.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-PKGBUILD-spl-modules: $(top_builddir)/config.status $(srcdir)/PKGBUILD-spl-modules.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
spl.release: $(top_builddir)/config.status $(srcdir)/spl.release.in
cd $(top_builddir) && $(SHELL) ./config.status $@
-dkms.conf: $(top_builddir)/config.status $(srcdir)/dkms.conf.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
distclean-libtool:
-rm -f libtool config.lt
+install-extraHEADERS: $(extra_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(extradir)" || $(MKDIR_P) "$(DESTDIR)$(extradir)"
+ @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(extradir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(extradir)" || exit $$?; \
+ done
+
+uninstall-extraHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(extra_HEADERS)'; test -n "$(extradir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(extradir)'; $(am__uninstall_files_from_dir)
+install-nodist_kernelHEADERS: $(nodist_kernel_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
+ @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
+ done
+
+uninstall-nodist_kernelHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nodist_kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(kerneldir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
|| exit 1; \
fi; \
done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
$(am__remove_distdir)
dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__remove_distdir)
dist-lzma: distdir
$(am__remove_distdir)
dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
all-am: Makefile $(HEADERS) spl_config.h
installdirs: installdirs-recursive
installdirs-am:
+ for dir in "$(DESTDIR)$(extradir)" "$(DESTDIR)$(kerneldir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-@CONFIG_KERNEL_FALSE@install-data-local:
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
info-am:
-install-data-am: install-data-local
+install-data-am: install-extraHEADERS install-nodist_kernelHEADERS
install-dvi: install-dvi-recursive
ps-am:
-uninstall-am:
+uninstall-am: uninstall-extraHEADERS uninstall-nodist_kernelHEADERS
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
- distcheck distclean distclean-generic distclean-hdr \
- distclean-libtool distclean-local distclean-tags \
+ dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \
+ dist-xz dist-zip distcheck distclean distclean-generic \
+ distclean-hdr distclean-libtool distclean-local distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
- install-data-am install-data-local install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am
-
-
-srpm-modules:
-@CONFIG_KERNEL_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" srpm-common
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-extraHEADERS install-html \
+ install-html-am install-info install-info-am install-man \
+ install-nodist_kernelHEADERS install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-extraHEADERS \
+ uninstall-nodist_kernelHEADERS
+
+
+srpm-kmod:
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
+ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_KMOD}' srpm-common
+
+srpm-dkms:
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
+ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_DKMS}' srpm-common
srpm-utils:
-@CONFIG_USER_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" srpm-common
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
+ def='${SRPM_DEFINE_COMMON} ${SRPM_DEFINE_UTIL}' srpm-common
-srpm: srpm-modules srpm-utils
+srpm: srpm-kmod srpm-dkms srpm-utils
+srpms: srpm-kmod srpm-dkms srpm-utils
-rpm-dkms: srpm-modules
-@CONFIG_KERNEL_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" dkms-common
+rpm-kmod: srpm-kmod
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-kmod" \
+ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_KMOD}' rpm-common
-rpm-modules: srpm-modules
-@CONFIG_KERNEL_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" rpm-common
+rpm-dkms: srpm-dkms
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-dkms" \
+ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_DKMS}' rpm-common
rpm-utils: srpm-utils
-@CONFIG_USER_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" rpm-common
+ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" \
+ def='${RPM_DEFINE_COMMON} ${RPM_DEFINE_UTIL}' rpm-common
-rpm: rpm-modules rpm-utils rpm-dkms
+rpm: rpm-kmod rpm-dkms rpm-utils
+rpms: rpm-kmod rpm-dkms rpm-utils
rpm-local:
@(if test "${HAVE_RPMBUILD}" = "no"; then \
mkdir -p $(rpmbuild)/RPMS && \
mkdir -p $(rpmbuild)/SRPMS && \
mkdir -p $(rpmbuild)/SPECS && \
- cp $(rpmspec) $(rpmbuild)/SPECS && \
+ cp ${RPM_SPEC_DIR}/$(rpmspec) $(rpmbuild)/SPECS && \
mkdir -p $(rpmbuild)/SOURCES && \
+ cp $(top_srcdir)/scripts/kmodtool $(rpmbuild)/SOURCES && \
cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
-dkms-common:
- rpmpkg=$(pkg)-$(SPL_META_VERSION)-$(SPL_META_RELEASE).src.rpm; \
- rpmspec=$(pkg).spec; \
- rpmdkms=$(pkg)-dkms-$(SPL_META_VERSION)-$(SPL_META_RELEASE).noarch.rpm;\
- rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
- $(MAKE) $(AM_MAKEFLAGS) \
- rpmbuild="$$rpmbuild" \
- rpmspec="$$rpmspec" \
- rpm-local || exit 1; \
- $(RPMBUILD) \
- --define "_tmppath $$rpmbuild/TMP" \
- --define "_topdir $$rpmbuild" \
- --define "dist %{nil}" \
- --define "_without_kernel 1" \
- --define "_without_kernel_debug 1" \
- --define "_with_kernel_dkms 1" \
- --nodeps --rebuild $$rpmpkg || exit 1; \
- cp $$rpmbuild/RPMS/noarch/$$rpmdkms . || exit 1; \
- $(RM) -R $$rpmbuild
-
srpm-common: dist
- rpmpkg=$(pkg)-$(SPL_META_VERSION)-$(SPL_META_RELEASE).src.rpm; \
+ @(dist=`$(RPM) --eval %{?dist}`; \
+ rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
- $(RPMBUILD) \
+ LANG=C $(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
- --define "build_src_rpm 1" \
- --define "dist %{nil}" \
- --nodeps -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
+ $(def) -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
- $(RM) -R $$rpmbuild
+ rm -R $$rpmbuild)
rpm-common:
- rpmpkg=$(pkg)-$(SPL_META_VERSION)-$(SPL_META_RELEASE).src.rpm; \
+ @(dist=`$(RPM) --eval %{?dist}`; \
+ rpmpkg=$(pkg)-$(VERSION)-$(RELEASE)$$dist*src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
- ${RPMBUILD} \
+ LANG=C ${RPMBUILD} \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
- --define "dist %{nil}" \
- --define "require_kdir $(LINUX)" \
- --define "require_kobj $(LINUX_OBJ)" \
- --define "require_kver $(LINUX_VERSION)" \
- --define "$(DEBUG_SPL) 1" \
- --define "$(DEBUG_LOG) 1" \
- --define "$(DEBUG_KMEM) 1" \
- --define "$(DEBUG_KMEM_TRACKING) 1" \
- --nodeps --rebuild $$rpmpkg || exit 1; \
+ $(def) --rebuild $$rpmpkg || exit 1; \
cp $$rpmbuild/RPMS/*/* . || exit 1; \
- $(RM) -R $$rpmbuild
+ rm -R $$rpmbuild)
deb-local:
@(if test "${HAVE_DPKGBUILD}" = "no"; then \
exit 1; \
fi)
-deb-modules: deb-local rpm-modules
-@CONFIG_KERNEL_TRUE@ name=${PACKAGE}-modules; \
-@CONFIG_KERNEL_TRUE@ version=${SPL_META_VERSION}-${SPL_META_RELEASE}; \
-@CONFIG_KERNEL_TRUE@ release=`echo ${LINUX_VERSION} | $(SED) -e "s/-/_/g"`; \
-@CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
-@CONFIG_KERNEL_TRUE@ pkg1=$${name}-$${version}_$${release}.$${arch}.rpm; \
-@CONFIG_KERNEL_TRUE@ pkg2=$${name}-devel-$${version}_$${release}.$${arch}.rpm; \
-@CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --scripts --to-deb $$pkg1 $$pkg2; \
-@CONFIG_KERNEL_TRUE@ $(RM) $$pkg1 $$pkg2
+deb-kmod: deb-local rpm-kmod
+@CONFIG_KERNEL_TRUE@ name=${PACKAGE}; \
+@CONFIG_KERNEL_TRUE@ version=${VERSION}-${RELEASE}; \
+@CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
+@CONFIG_KERNEL_TRUE@ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
+@CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --bump=0 --scripts --to-deb $$pkg1; \
+@CONFIG_KERNEL_TRUE@ $(RM) $$pkg1
deb-utils: deb-local rpm-utils
@CONFIG_USER_TRUE@ name=${PACKAGE}; \
-@CONFIG_USER_TRUE@ version=${SPL_META_VERSION}-${SPL_META_RELEASE}; \
+@CONFIG_USER_TRUE@ version=${VERSION}-${RELEASE}; \
@CONFIG_USER_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
@CONFIG_USER_TRUE@ pkg1=$${name}-$${version}.$${arch}.rpm; \
-@CONFIG_USER_TRUE@ fakeroot $(ALIEN) --scripts --to-deb $$pkg1; \
+@CONFIG_USER_TRUE@ fakeroot $(ALIEN) --bump=0 --scripts --to-deb $$pkg1; \
@CONFIG_USER_TRUE@ $(RM) $$pkg1
-deb: deb-modules deb-utils
+deb: deb-kmod deb-utils
tgz-local:
@(if test "${HAVE_ALIEN}" = "no"; then \
exit 1; \
fi)
-tgz-modules: tgz-local rpm-modules
-@CONFIG_KERNEL_TRUE@ name=${PACKAGE}-modules; \
-@CONFIG_KERNEL_TRUE@ version=${SPL_META_VERSION}-${SPL_META_RELEASE}; \
-@CONFIG_KERNEL_TRUE@ release=`echo ${LINUX_VERSION} | $(SED) -e "s/-/_/g"`; \
-@CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
-@CONFIG_KERNEL_TRUE@ pkg1=$${name}-$${version}_$${release}.$${arch}.rpm; \
-@CONFIG_KERNEL_TRUE@ pkg2=$${name}-devel-$${version}_$${release}.$${arch}.rpm; \
-@CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2; \
-@CONFIG_KERNEL_TRUE@ $(RM) $$pkg1 $$pkg2
+tgz-kmod: tgz-local rpm-kmod
+@CONFIG_KERNEL_TRUE@ name=${PACKAGE}; \
+@CONFIG_KERNEL_TRUE@ version=${VERSION}-${RELEASE}; \
+@CONFIG_KERNEL_TRUE@ arch=`$(RPM) -qp $${name}-kmod-$${version}.src.rpm --qf %{arch} | tail -1`; \
+@CONFIG_KERNEL_TRUE@ pkg1=kmod-$${name}*$${version}.$${arch}.rpm; \
+@CONFIG_KERNEL_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
+@CONFIG_KERNEL_TRUE@ $(RM) $$pkg1
tgz-utils: tgz-local rpm-utils
@CONFIG_USER_TRUE@ name=${PACKAGE}; \
-@CONFIG_USER_TRUE@ version=${SPL_META_VERSION}-${SPL_META_RELEASE}; \
+@CONFIG_USER_TRUE@ version=${VERSION}-${RELEASE}; \
@CONFIG_USER_TRUE@ arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
@CONFIG_USER_TRUE@ pkg1=$${name}-$${version}.$${arch}.rpm; \
@CONFIG_USER_TRUE@ fakeroot $(ALIEN) --scripts --to-tgz $$pkg1; \
@CONFIG_USER_TRUE@ $(RM) $$pkg1
-tgz: tgz-modules tgz-utils
-
-sarch-modules:
- $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" sarch-common
-
-sarch-utils:
- $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" sarch-common
-
-sarch: sarch-modules sarch-utils
-
-arch-modules:
-@CONFIG_KERNEL_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" arch-common
-
-arch-utils:
-@CONFIG_USER_TRUE@ $(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" arch-common
-
-arch: arch-modules arch-utils
-
-arch-local:
- @(if test "${HAVE_MAKEPKG}" = "no"; then \
- echo -e "\n" \
- "*** Required util ${MAKEPKG} missing. Please install the\n" \
- "*** package for your distribution which provides ${MAKEPKG},\n" \
- "*** re-run configure, and try again.\n"; \
- exit 1; \
- fi;)
-
-sarch-common: dist
- pkgbuild=PKGBUILD-$(pkg); \
- $(MAKE) $(AM_MAKEFLAGS) arch-local || exit 1; \
- $(MAKEPKG) --allsource --skipinteg --nodeps -p $$pkgbuild || exit 1;
-
-arch-common: dist
- pkgbuild=PKGBUILD-$(pkg); \
- $(MAKE) $(AM_MAKEFLAGS) arch-local || exit 1; \
- $(MAKEPKG) --skipinteg -p $$pkgbuild || exit 1;
+tgz: tgz-kmod tgz-utils
distclean-local::
-$(RM) -R autom4te*.cache
-o -name '*.order' -o -name '*.markers' \) \
-type f -print | xargs $(RM)
-@CONFIG_KERNEL_TRUE@install-data-local:
-@CONFIG_KERNEL_TRUE@ release=$(SPL_META_VERSION)-$(SPL_META_RELEASE); \
-@CONFIG_KERNEL_TRUE@ instdest=$(DESTDIR)/usr/src/spl-$$release/$(LINUX_VERSION); \
-@CONFIG_KERNEL_TRUE@ for instfile in $(noinst_HEADERS) module/$(LINUX_SYMBOLS); do \
-@CONFIG_KERNEL_TRUE@ $(INSTALL) -D $$instfile $$instdest/$$instfile; \
-@CONFIG_KERNEL_TRUE@ done
+dist-hook:
+ sed -i 's/Release:[[:print:]]*/Release: $(RELEASE)/' \
+ $(distdir)/META
ctags:
- $(RM) $(top_srcdir)/tags
+ $(RM) tags
find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
etags:
- $(RM) $(top_srcdir)/TAGS
+ $(RM) TAGS
find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
tags: ctags etags
pkg: @DEFAULT_PACKAGE@
-pkg-modules: @DEFAULT_PACKAGE@-modules
+pkg-kmod: @DEFAULT_PACKAGE@-kmod
pkg-utils: @DEFAULT_PACKAGE@-utils
# Tell versions [3.59,3.63) of GNU make to not export all variables.
projects / mirror_spl-debian.git / blobdiff