host_triplet = @host@
target_triplet = @target@
subdir = include
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+DIST_COMMON = $(am__kernel_HEADERS_DIST) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/config/spl-build.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/config/kernel-ctl-table-name.m4 \
+ $(top_srcdir)/config/kernel-fallocate.m4 \
+ $(top_srcdir)/config/kernel-group-info.m4 \
+ $(top_srcdir)/config/kernel-inode-lock.m4 \
+ $(top_srcdir)/config/kernel-inode-times.m4 \
+ $(top_srcdir)/config/kernel-kmem-cache.m4 \
+ $(top_srcdir)/config/kernel-kuidgid.m4 \
+ $(top_srcdir)/config/kernel-pde-data.m4 \
+ $(top_srcdir)/config/kernel-rw.m4 \
+ $(top_srcdir)/config/kernel-rwsem.m4 \
+ $(top_srcdir)/config/kernel-sched.m4 \
+ $(top_srcdir)/config/kernel-set-fs-pwd.m4 \
+ $(top_srcdir)/config/kernel-shrinker.m4 \
+ $(top_srcdir)/config/kernel-spinlock.m4 \
+ $(top_srcdir)/config/kernel-timer.m4 \
+ $(top_srcdir)/config/kernel-trim-unused-symbols.m4 \
+ $(top_srcdir)/config/kernel-truncate-range.m4 \
+ $(top_srcdir)/config/kernel-urange-sleep.m4 \
+ $(top_srcdir)/config/kernel-vfs-fsync.m4 \
+ $(top_srcdir)/config/kernel-vfs-getattr.m4 \
+ $(top_srcdir)/config/kernel-wait.m4 \
+ $(top_srcdir)/config/kernel-zlib.m4 \
+ $(top_srcdir)/config/libtool.m4 \
+ $(top_srcdir)/config/ltoptions.m4 \
+ $(top_srcdir)/config/ltsugar.m4 \
+ $(top_srcdir)/config/ltversion.m4 \
+ $(top_srcdir)/config/lt~obsolete.m4 \
+ $(top_srcdir)/config/spl-build.m4 \
$(top_srcdir)/config/spl-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
-HEADERS = $(noinst_HEADERS)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+am__kernel_HEADERS_DIST = $(top_srcdir)/include/splat-ctl.h \
+ $(top_srcdir)/include/spl-ctl.h \
+ $(top_srcdir)/include/strings.h $(top_srcdir)/include/unistd.h
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(kerneldir)"
+HEADERS = $(kernel_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
ETAGS = etags
CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
+DEBUG_KMEM = @DEBUG_KMEM@
+DEBUG_KMEM_TRACKING = @DEBUG_KMEM_TRACKING@
+DEBUG_SPL = @DEBUG_SPL@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
-LICENSE = @LICENSE@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
+RELEASE = @RELEASE@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_DEFINE_COMMON = @RPM_DEFINE_COMMON@
+RPM_DEFINE_DKMS = @RPM_DEFINE_DKMS@
+RPM_DEFINE_KMOD = @RPM_DEFINE_KMOD@
+RPM_DEFINE_UTIL = @RPM_DEFINE_UTIL@
+RPM_SPEC_DIR = @RPM_SPEC_DIR@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SPL_META_ALIAS = @SPL_META_ALIAS@
SPL_META_AUTHOR = @SPL_META_AUTHOR@
SPL_META_DATA = @SPL_META_DATA@
+SPL_META_LICENSE = @SPL_META_LICENSE@
SPL_META_LT_AGE = @SPL_META_LT_AGE@
SPL_META_LT_CURRENT = @SPL_META_LT_CURRENT@
SPL_META_LT_REVISION = @SPL_META_LT_REVISION@
SPL_META_NAME = @SPL_META_NAME@
SPL_META_RELEASE = @SPL_META_RELEASE@
SPL_META_VERSION = @SPL_META_VERSION@
+SRPM_DEFINE_COMMON = @SRPM_DEFINE_COMMON@
+SRPM_DEFINE_DKMS = @SRPM_DEFINE_DKMS@
+SRPM_DEFINE_KMOD = @SRPM_DEFINE_KMOD@
+SRPM_DEFINE_UTIL = @SRPM_DEFINE_UTIL@
STRIP = @STRIP@
+VENDOR = @VENDOR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-
-# All headers are referenced by this top level Makefile.am are
-# noinst_HEADERS because they are not installed in the usual include
-# location. We do not want to be using $includedir for this.
-# Installation is handled by the custom install-data-local rule.
-noinst_HEADERS = *.h fs/*.h linux/*.h rpc/*.h sharefs/*.h sys/fm/*.h \
- sys/fs/*.h sys/sysevent/*.h sys/*.h util/*.h vm/*.h
-all: all-am
+SUBDIRS = fs linux rpc sharefs sys util vm
+COMMON_H =
+KERNEL_H = \
+ $(top_srcdir)/include/splat-ctl.h \
+ $(top_srcdir)/include/spl-ctl.h \
+ $(top_srcdir)/include/strings.h \
+ $(top_srcdir)/include/unistd.h
+
+USER_H =
+EXTRA_DIST = $(COMMON_H) $(KERNEL_H) $(USER_H)
+@CONFIG_KERNEL_TRUE@kerneldir = @prefix@/src/spl-$(VERSION)/include
+@CONFIG_KERNEL_TRUE@kernel_HEADERS = $(KERNEL_H)
+all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
clean-libtool:
-rm -rf .libs _libs
+install-kernelHEADERS: $(kernel_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
+ @list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
+ done
+
+uninstall-kernelHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(kerneldir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(kerneldir)" && rm -f $$files
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
mkid -fID $$unique
tags: TAGS
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
fi; \
fi
ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
|| exit 1; \
fi; \
done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
check-am: all-am
-check: check-am
+check: check-recursive
all-am: Makefile $(HEADERS)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(kerneldir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-installcheck: installcheck-am
+installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
+clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
-distclean: distclean-am
+distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
-dvi: dvi-am
+dvi: dvi-recursive
dvi-am:
-html: html-am
+html: html-recursive
html-am:
-info: info-am
+info: info-recursive
info-am:
-install-data-am: install-data-local
+install-data-am: install-kernelHEADERS
-install-dvi: install-dvi-am
+install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
-install-html: install-html-am
+install-html: install-html-recursive
install-html-am:
-install-info: install-info-am
+install-info: install-info-recursive
install-info-am:
install-man:
-install-pdf: install-pdf-am
+install-pdf: install-pdf-recursive
install-pdf-am:
-install-ps: install-ps-am
+install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-pdf: pdf-am
+pdf: pdf-recursive
pdf-am:
-ps: ps-am
+ps: ps-recursive
ps-am:
-uninstall-am:
+uninstall-am: uninstall-kernelHEADERS
-.MAKE: install-am install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+ install-am install-strip tags-recursive
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool ctags distclean distclean-generic \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
- install-data-am install-data-local install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-kernelHEADERS install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
- uninstall-am
-
-
-install-data-local:
- destname=spl-$(SPL_META_VERSION)/$(LINUX_VERSION); \
- instdest=$(DESTDIR)/${prefix}/src/$$destname; \
- instfiles=`find . -name '*.h'`; \
- for instfile in $$instfiles; do \
- $(INSTALL) -D $$instfile $$instdest/$$instfile; \
- done
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am \
+ uninstall-kernelHEADERS
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.