drivers/media/radio/Kconfig

   1 #
   2 # Multimedia Video device configuration
   3 #
   4
   5 menu "Radio Adapters"
   6         depends on VIDEO_DEV!=n
   7
   8 config RADIO_CADET
   9         tristate "ADS Cadet AM/FM Tuner"
  10         depends on ISA && VIDEO_DEV
  11         ---help---
  12           Choose Y here if you have one of these AM/FM radio cards, and then
  13           fill in the port address below.
  14
  15           In order to control your radio card, you will need to use programs
  16           that are compatible with the Video For Linux API.  Information on
  17           this API and pointers to "v4l" programs may be found at
  18           <file:Documentation/video4linux/API.html>.
  19
  20           Further documentation on this driver can be found on the WWW at
  21           <http://linux.blackhawke.net/cadet/>.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called radio-cadet.
  25
  26 config RADIO_RTRACK
  27         tristate "AIMSlab RadioTrack (aka RadioReveal) support"
  28         depends on ISA && VIDEO_DEV
  29         ---help---
  30           Choose Y here if you have one of these FM radio cards, and then fill
  31           in the port address below.
  32
  33           Note that newer AIMSlab RadioTrack cards have a different chipset
  34           and are not supported by this driver.  For these cards, use the
  35           RadioTrack II driver below.
  36
  37           If you have a GemTeks combined (PnP) sound- and radio card you must
  38           use this driver as a module and setup the card with isapnptools.
  39           You must also pass the module a suitable io parameter, 0x248 has
  40           been reported to be used by these cards.
  41
  42           In order to control your radio card, you will need to use programs
  43           that are compatible with the Video For Linux API.  Information on
  44           this API and pointers to "v4l" programs may be found at
  45           <file:Documentation/video4linux/API.html>. More information is
  46           contained in the file
  47           <file:Documentation/video4linux/radiotrack.txt>.
  48
  49           To compile this driver as a module, choose M here: the
  50           module will be called radio-aimslab.
  51
  52 config RADIO_RTRACK_PORT
  53         hex "RadioTrack i/o port (0x20f or 0x30f)"
  54         depends on RADIO_RTRACK=y
  55         default "20f"
  56         help
  57           Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
  58           haven't changed the jumper setting on the card.
  59
  60 config RADIO_RTRACK2
  61         tristate "AIMSlab RadioTrack II support"
  62         depends on ISA && VIDEO_DEV
  63         ---help---
  64           Choose Y here if you have this FM radio card, and then fill in the
  65           port address below.
  66
  67           In order to control your radio card, you will need to use programs
  68           that are compatible with the Video For Linux API.  Information on
  69           this API and pointers to "v4l" programs may be found at
  70           <file:Documentation/video4linux/API.html>.
  71
  72           To compile this driver as a module, choose M here: the
  73           module will be called radio-rtrack2.
  74
  75 config RADIO_RTRACK2_PORT
  76         hex "RadioTrack II i/o port (0x20c or 0x30c)"
  77         depends on RADIO_RTRACK2=y
  78         default "30c"
  79         help
  80           Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
  81           haven't changed the jumper setting on the card.
  82
  83 config RADIO_AZTECH
  84         tristate "Aztech/Packard Bell Radio"
  85         depends on ISA && VIDEO_DEV
  86         ---help---
  87           Choose Y here if you have one of these FM radio cards, and then fill
  88           in the port address below.
  89
  90           In order to control your radio card, you will need to use programs
  91           that are compatible with the Video For Linux API.  Information on
  92           this API and pointers to "v4l" programs may be found at
  93           <file:Documentation/video4linux/API.html>.
  94
  95           To compile this driver as a module, choose M here: the
  96           module will be called radio-aztech.
  97
  98 config RADIO_AZTECH_PORT
  99         hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
 100         depends on RADIO_AZTECH=y
 101         default "350"
 102         help
 103           Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
 104           haven't changed the setting of jumper JP3 on the card.  Removing the
 105           jumper sets the card to 0x358.
 106
 107 config RADIO_GEMTEK
 108         tristate "GemTek Radio Card support"
 109         depends on ISA && VIDEO_DEV
 110         ---help---
 111           Choose Y here if you have this FM radio card, and then fill in the
 112           port address below.
 113
 114           In order to control your radio card, you will need to use programs
 115           that are compatible with the Video For Linux API.  Information on
 116           this API and pointers to "v4l" programs may be found at
 117           <file:Documentation/video4linux/API.html>.
 118
 119           To compile this driver as a module, choose M here: the
 120           module will be called radio-gemtek.
 121
 122 config RADIO_GEMTEK_PORT
 123         hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)"
 124         depends on RADIO_GEMTEK=y
 125         default "34c"
 126         help
 127           Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
 128           0x34c, if you haven't changed the jumper setting on the card. On
 129           Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 130           port is 0x28c.
 131
 132 config RADIO_GEMTEK_PCI
 133         tristate "GemTek PCI Radio Card support"
 134         depends on VIDEO_DEV && PCI
 135         ---help---
 136           Choose Y here if you have this PCI FM radio card.
 137
 138           In order to control your radio card, you will need to use programs
 139           that are compatible with the Video for Linux API.  Information on
 140           this API and pointers to "v4l" programs may be found at
 141           <file:Documentation/video4linux/API.html>.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called radio-gemtek-pci.
 145
 146 config RADIO_MAXIRADIO
 147         tristate "Guillemot MAXI Radio FM 2000 radio"
 148         depends on VIDEO_DEV && PCI
 149         ---help---
 150           Choose Y here if you have this radio card.  This card may also be
 151           found as Gemtek PCI FM.
 152
 153           In order to control your radio card, you will need to use programs
 154           that are compatible with the Video For Linux API.  Information on
 155           this API and pointers to "v4l" programs may be found at
 156           <file:Documentation/video4linux/API.html>.
 157
 158           To compile this driver as a module, choose M here: the
 159           module will be called radio-maxiradio.
 160
 161 config RADIO_MAESTRO
 162         tristate "Maestro on board radio"
 163         depends on VIDEO_DEV
 164         ---help---
 165           Say Y here to directly support the on-board radio tuner on the
 166           Maestro 2 or 2E sound card.
 167
 168           In order to control your radio card, you will need to use programs
 169           that are compatible with the Video For Linux API.  Information on
 170           this API and pointers to "v4l" programs may be found at
 171           <file:Documentation/video4linux/API.html>.
 172
 173           To compile this driver as a module, choose M here: the
 174           module will be called radio-maestro.
 175
 176 config RADIO_MIROPCM20
 177         tristate "miroSOUND PCM20 radio"
 178         depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
 179         ---help---
 180           Choose Y here if you have this FM radio card. You also need to say Y
 181           to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
 182           for this to work.
 183
 184           In order to control your radio card, you will need to use programs
 185           that are compatible with the Video For Linux API.  Information on
 186           this API and pointers to "v4l" programs may be found at
 187           <file:Documentation/video4linux/API.html>.
 188
 189           To compile this driver as a module, choose M here: the
 190           module will be called miropcm20.
 191
 192 config RADIO_MIROPCM20_RDS
 193         tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)"
 194         depends on RADIO_MIROPCM20 && EXPERIMENTAL
 195         ---help---
 196           Choose Y here if you want to see RDS/RBDS information like
 197           RadioText, Programme Service name, Clock Time and date, Programme
 198           TYpe and Traffic Announcement/Programme identification.  You also
 199           need to say Y to "miroSOUND PCM20 radio" and devfs!
 200
 201           It's not possible to read the raw RDS packets from the device, so
 202           the driver cant provide an V4L interface for this.  But the
 203           availability of RDS is reported over V4L by the basic driver
 204           already.  Here RDS can be read from files in /dev/v4l/rds.
 205
 206           To compile this driver as a module, choose M here: the
 207           module will be called miropcm20-rds.
 208
 209 config RADIO_SF16FMI
 210         tristate "SF16FMI Radio"
 211         depends on ISA && VIDEO_DEV
 212         ---help---
 213           Choose Y here if you have one of these FM radio cards.  If you
 214           compile the driver into the kernel and your card is not PnP one, you
 215           have to add "sf16fm=<io>" to the kernel command line (I/O address is
 216           0x284 or 0x384).
 217
 218           In order to control your radio card, you will need to use programs
 219           that are compatible with the Video For Linux API.  Information on
 220           this API and pointers to "v4l" programs may be found at
 221           <file:Documentation/video4linux/API.html>.
 222
 223           To compile this driver as a module, choose M here: the
 224           module will be called radio-sf16fmi.
 225
 226 config RADIO_SF16FMR2
 227         tristate "SF16FMR2 Radio"
 228         depends on ISA && VIDEO_DEV
 229         ---help---
 230           Choose Y here if you have one of these FM radio cards.
 231
 232           In order to control your radio card, you will need to use programs
 233           that are compatible with the Video For Linux API.  Information on
 234           this API and pointers to "v4l" programs may be found on the WWW at
 235           <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
 236
 237           To compile this driver as a module, choose M here: the
 238           module will be called radio-sf16fmr2.
 239
 240 config RADIO_TERRATEC
 241         tristate "TerraTec ActiveRadio ISA Standalone"
 242         depends on ISA && VIDEO_DEV
 243         ---help---
 244           Choose Y here if you have this FM radio card, and then fill in the
 245           port address below. (TODO)
 246
 247           Note: This driver is in its early stages.  Right now volume and
 248           frequency control and muting works at least for me, but
 249           unfortunately I have not found anybody who wants to use this card
 250           with Linux.  So if it is this what YOU are trying to do right now,
 251           PLEASE DROP ME A NOTE!!  Rolf Offermanns <rolf@offermanns.de>.
 252
 253           In order to control your radio card, you will need to use programs
 254           that are compatible with the Video For Linux API.  Information on
 255           this API and pointers to "v4l" programs may be found at
 256           <file:Documentation/video4linux/API.html>.
 257
 258           To compile this driver as a module, choose M here: the
 259           module will be called radio-terratec.
 260
 261 config RADIO_TERRATEC_PORT
 262         hex "Terratec i/o port (normally 0x590)"
 263         depends on RADIO_TERRATEC=y
 264         default "590"
 265         help
 266           Fill in the I/O port of your TerraTec FM radio card. If unsure, go
 267           with the default.
 268
 269 config RADIO_TRUST
 270         tristate "Trust FM radio card"
 271         depends on ISA && VIDEO_DEV
 272         help
 273           This is a driver for the Trust FM radio cards. Say Y if you have
 274           such a card and want to use it under Linux.
 275
 276           To compile this driver as a module, choose M here: the
 277           module will be called radio-trust.
 278
 279 config RADIO_TRUST_PORT
 280         hex "Trust i/o port (usually 0x350 or 0x358)"
 281         depends on RADIO_TRUST=y
 282         default "350"
 283         help
 284           Enter the I/O port of your Trust FM radio card. If unsure, try the
 285           values "0x350" or "0x358".
 286
 287 config RADIO_TYPHOON
 288         tristate "Typhoon Radio (a.k.a. EcoRadio)"
 289         depends on ISA && VIDEO_DEV
 290         ---help---
 291           Choose Y here if you have one of these FM radio cards, and then fill
 292           in the port address and the frequency used for muting below.
 293
 294           In order to control your radio card, you will need to use programs
 295           that are compatible with the Video For Linux API.  Information on
 296           this API and pointers to "v4l" programs may be found at
 297           <file:Documentation/video4linux/API.html>.
 298
 299           To compile this driver as a module, choose M here: the
 300           module will be called radio-typhoon.
 301
 302 config RADIO_TYPHOON_PROC_FS
 303         bool "Support for /proc/radio-typhoon"
 304         depends on PROC_FS && RADIO_TYPHOON
 305         help
 306           Say Y here if you want the typhoon radio card driver to write
 307           status information (frequency, volume, muted, mute frequency,
 308           base address) to /proc/radio-typhoon. The file can be viewed with
 309           your favorite pager (i.e. use "more /proc/radio-typhoon" or "less
 310           /proc/radio-typhoon" or simply "cat /proc/radio-typhoon").
 311
 312 config RADIO_TYPHOON_PORT
 313         hex "Typhoon I/O port (0x316 or 0x336)"
 314         depends on RADIO_TYPHOON=y
 315         default "316"
 316         help
 317           Enter the I/O port of your Typhoon or EcoRadio radio card.
 318
 319 config RADIO_TYPHOON_MUTEFREQ
 320         int "Typhoon frequency set when muting the device (kHz)"
 321         depends on RADIO_TYPHOON=y
 322         default "87500"
 323         help
 324           Enter the frequency used for muting the radio. The device is never
 325           completely silent. If the volume is just turned down, you can still
 326           hear silent voices and music. For that reason, the frequency of the
 327           radio device is set to the frequency you can enter here whenever
 328           the device is muted. There should be no local radio station at that
 329           frequency.
 330
 331 config RADIO_ZOLTRIX
 332         tristate "Zoltrix Radio"
 333         depends on ISA && VIDEO_DEV
 334         ---help---
 335           Choose Y here if you have one of these FM radio cards, and then fill
 336           in the port address below.
 337
 338           In order to control your radio card, you will need to use programs
 339           that are compatible with the Video For Linux API.  Information on
 340           this API and pointers to "v4l" programs may be found at
 341           <file:Documentation/video4linux/API.html>.
 342
 343           To compile this driver as a module, choose M here: the
 344           module will be called radio-zoltrix.
 345
 346 config RADIO_ZOLTRIX_PORT
 347         hex "ZOLTRIX I/O port (0x20c or 0x30c)"
 348         depends on RADIO_ZOLTRIX=y
 349         default "20c"
 350         help
 351           Enter the I/O port of your Zoltrix radio card.
 352
 353 endmenu
 354