drivers/regulator/Kconfig

   1 menuconfig REGULATOR
   2         bool "Voltage and Current Regulator Support"
   3         help
   4           Generic Voltage and Current Regulator support.
   5
   6           This framework is designed to provide a generic interface to voltage
   7           and current regulators within the Linux kernel. It's intended to
   8           provide voltage and current control to client or consumer drivers and
   9           also provide status information to user space applications through a
  10           sysfs interface.
  11
  12           The intention is to allow systems to dynamically control regulator
  13           output in order to save power and prolong battery life. This applies
  14           to both voltage regulators (where voltage output is controllable) and
  15           current sinks (where current output is controllable).
  16
  17           This framework safely compiles out if not selected so that client
  18           drivers can still be used in systems with no software controllable
  19           regulators.
  20
  21           If unsure, say no.
  22
  23
  24 if REGULATOR
  25
  26 config REGULATOR_DEBUG
  27         bool "Regulator debug support"
  28         help
  29           Say yes here to enable debugging support.
  30
  31 config REGULATOR_FIXED_VOLTAGE
  32         tristate "Fixed voltage regulator support"
  33         help
  34           This driver provides support for fixed voltage regulators,
  35           useful for systems which use a combination of software
  36           managed regulators and simple non-configurable regulators.
  37
  38 config REGULATOR_VIRTUAL_CONSUMER
  39         tristate "Virtual regulator consumer support"
  40         help
  41           This driver provides a virtual consumer for the voltage and
  42           current regulator API which provides sysfs controls for
  43           configuring the supplies requested.  This is mainly useful
  44           for test purposes.
  45
  46           If unsure, say no.
  47
  48 config REGULATOR_USERSPACE_CONSUMER
  49         tristate "Userspace regulator consumer support"
  50         help
  51           There are some classes of devices that are controlled entirely
  52           from user space. Userspace consumer driver provides ability to
  53           control power supplies for such devices.
  54
  55           If unsure, say no.
  56
  57 config REGULATOR_88PM800
  58         tristate "Marvell 88PM800 Power regulators"
  59         depends on MFD_88PM800
  60         help
  61           This driver supports Marvell 88PM800 voltage regulator chips.
  62           It delivers digitally programmable output,
  63           the voltage is programmed via I2C interface.
  64           It's suitable to support PXA988 chips to control VCC_MAIN and
  65           various voltages.
  66
  67 config REGULATOR_88PM8607
  68         tristate "Marvell 88PM8607 Power regulators"
  69         depends on MFD_88PM860X=y
  70         help
  71           This driver supports 88PM8607 voltage regulator chips.
  72
  73 config REGULATOR_ACT8865
  74         tristate "Active-semi act8865 voltage regulator"
  75         depends on I2C
  76         select REGMAP_I2C
  77         help
  78           This driver controls a active-semi act8865 voltage output
  79           regulator via I2C bus.
  80
  81 config REGULATOR_ACT8945A
  82         tristate "Active-semi ACT8945A voltage regulator"
  83         depends on MFD_ACT8945A
  84         help
  85           This driver controls a active-semi ACT8945A voltage regulator
  86           via I2C bus. The ACT8945A features three step-down DC/DC converters
  87           and four low-dropout linear regulators, along with a ActivePath
  88           battery charger.
  89
  90 config REGULATOR_AD5398
  91         tristate "Analog Devices AD5398/AD5821 regulators"
  92         depends on I2C
  93         help
  94           This driver supports AD5398 and AD5821 current regulator chips.
  95           If building into module, its name is ad5398.ko.
  96
  97 config REGULATOR_ANATOP
  98         tristate "Freescale i.MX on-chip ANATOP LDO regulators"
  99         depends on MFD_SYSCON
 100         help
 101           Say y here to support Freescale i.MX on-chip ANATOP LDOs
 102           regulators. It is recommended that this option be
 103           enabled on i.MX6 platform.
 104
 105 config REGULATOR_AAT2870
 106         tristate "AnalogicTech AAT2870 Regulators"
 107         depends on MFD_AAT2870_CORE
 108         help
 109           If you have a AnalogicTech AAT2870 say Y to enable the
 110           regulator driver.
 111
 112 config REGULATOR_AB3100
 113         tristate "ST-Ericsson AB3100 Regulator functions"
 114         depends on AB3100_CORE
 115         default y if AB3100_CORE
 116         help
 117          These regulators correspond to functionality in the
 118          AB3100 analog baseband dealing with power regulators
 119          for the system.
 120
 121 config REGULATOR_AB8500
 122         bool "ST-Ericsson AB8500 Power Regulators"
 123         depends on AB8500_CORE
 124         help
 125           This driver supports the regulators found on the ST-Ericsson mixed
 126           signal AB8500 PMIC
 127
 128 config REGULATOR_ARIZONA_LDO1
 129         tristate "Wolfson Arizona class devices LDO1"
 130         depends on MFD_ARIZONA
 131         depends on SND_SOC
 132         help
 133           Support for the LDO1 regulators found on Wolfson Arizona class
 134           devices.
 135
 136 config REGULATOR_ARIZONA_MICSUPP
 137         tristate "Wolfson Arizona class devices MICSUPP"
 138         depends on MFD_ARIZONA
 139         depends on SND_SOC
 140         help
 141           Support for the MICSUPP regulators found on Wolfson Arizona class
 142           devices.
 143
 144 config REGULATOR_AS3711
 145         tristate "AS3711 PMIC"
 146         depends on MFD_AS3711
 147         help
 148           This driver provides support for the voltage regulators on the
 149           AS3711 PMIC
 150
 151 config REGULATOR_AS3722
 152         tristate "AMS AS3722 PMIC Regulators"
 153         depends on MFD_AS3722
 154         help
 155           This driver provides support for the voltage regulators on the
 156           AS3722 PMIC. This will enable support for all the software
 157           controllable DCDC/LDO regulators.
 158
 159 config REGULATOR_AXP20X
 160         tristate "X-POWERS AXP20X PMIC Regulators"
 161         depends on MFD_AXP20X
 162         help
 163           This driver provides support for the voltage regulators on the
 164           AXP20X PMIC.
 165
 166 config REGULATOR_BCM590XX
 167         tristate "Broadcom BCM590xx PMU Regulators"
 168         depends on MFD_BCM590XX
 169         help
 170           This driver provides support for the voltage regulators on the
 171           BCM590xx PMUs. This will enable support for the software
 172           controllable LDO/Switching regulators.
 173
 174 config REGULATOR_BD9571MWV
 175         tristate "ROHM BD9571MWV Regulators"
 176         depends on MFD_BD9571MWV
 177         help
 178           This driver provides support for the voltage regulators on the
 179           ROHM BD9571MWV PMIC. This will enable support for the software
 180           controllable regulator and voltage sampling units.
 181
 182           This driver can also be built as a module. If so, the module
 183           will be called bd9571mwv-regulator.
 184
 185 config REGULATOR_CPCAP
 186         tristate "Motorola CPCAP regulator"
 187         depends on MFD_CPCAP
 188         help
 189           Say y here for CPCAP regulator found on some Motorola phones
 190           and tablets such as Droid 4.
 191
 192 config REGULATOR_DA903X
 193         tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 194         depends on PMIC_DA903X
 195         help
 196           Say y here to support the BUCKs and LDOs regulators found on
 197           Dialog Semiconductor DA9030/DA9034 PMIC.
 198
 199 config REGULATOR_DA9052
 200         tristate "Dialog Semiconductor DA9052/DA9053 regulators"
 201         depends on PMIC_DA9052
 202         help
 203           This driver supports the voltage regulators of DA9052-BC and
 204           DA9053-AA/Bx PMIC.
 205
 206 config REGULATOR_DA9055
 207         tristate "Dialog Semiconductor DA9055 regulators"
 208         depends on MFD_DA9055
 209         help
 210           Say y here to support the BUCKs and LDOs regulators found on
 211           Dialog Semiconductor DA9055 PMIC.
 212
 213           This driver can also be built as a module. If so, the module
 214           will be called da9055-regulator.
 215
 216 config REGULATOR_DA9062
 217         tristate "Dialog Semiconductor DA9062 regulators"
 218         depends on MFD_DA9062
 219         help
 220           Say y here to support the BUCKs and LDOs regulators found on
 221           DA9062 PMICs.
 222
 223           This driver can also be built as a module. If so, the module
 224           will be called da9062-regulator.
 225
 226 config REGULATOR_DA9063
 227         tristate "Dialog Semiconductor DA9063 regulators"
 228         depends on MFD_DA9063
 229         help
 230           Say y here to support the BUCKs and LDOs regulators found on
 231           DA9063 PMICs.
 232
 233           This driver can also be built as a module. If so, the module
 234           will be called da9063-regulator.
 235
 236 config REGULATOR_DA9210
 237         tristate "Dialog Semiconductor DA9210 regulator"
 238         depends on I2C
 239         select REGMAP_I2C
 240         help
 241           Say y here to support for the Dialog Semiconductor DA9210.
 242           The DA9210 is a multi-phase synchronous step down
 243           converter 12A DC-DC Buck controlled through an I2C
 244           interface.
 245
 246 config REGULATOR_DA9211
 247         tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
 248         depends on I2C
 249         select REGMAP_I2C
 250         help
 251           Say y here to support for the Dialog Semiconductor DA9211/DA9212
 252           /DA9213/DA9214/DA9215.
 253           The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
 254           step down converter 12A or 16A DC-DC Buck controlled through an I2C
 255           interface.
 256
 257 config REGULATOR_DBX500_PRCMU
 258         bool
 259
 260 config REGULATOR_DB8500_PRCMU
 261         bool "ST-Ericsson DB8500 Voltage Domain Regulators"
 262         depends on MFD_DB8500_PRCMU
 263         select REGULATOR_DBX500_PRCMU
 264         help
 265           This driver supports the voltage domain regulators controlled by the
 266           DB8500 PRCMU
 267
 268 config REGULATOR_FAN53555
 269         tristate "Fairchild FAN53555 Regulator"
 270         depends on I2C
 271         select REGMAP_I2C
 272         help
 273           This driver supports Fairchild FAN53555 Digitally Programmable
 274           TinyBuck Regulator. The FAN53555 is a step-down switching voltage
 275           regulator that delivers a digitally programmable output from an
 276           input voltage supply of 2.5V to 5.5V. The output voltage is
 277           programmed through an I2C interface.
 278
 279 config REGULATOR_GPIO
 280         tristate "GPIO regulator support"
 281         depends on GPIOLIB || COMPILE_TEST
 282         help
 283           This driver provides support for regulators that can be
 284           controlled via gpios.
 285           It is capable of supporting current and voltage regulators
 286           and the platform has to provide a mapping of GPIO-states
 287           to target volts/amps.
 288
 289 config REGULATOR_HI6421
 290         tristate "HiSilicon Hi6421 PMIC voltage regulator support"
 291         depends on MFD_HI6421_PMIC && OF
 292         help
 293           This driver provides support for the voltage regulators on the
 294           HiSilicon Hi6421 PMU / Codec IC.
 295           Hi6421 is a multi-function device which, on regulator part, provides
 296           21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 297           of them come with support to either ECO (idle) or sleep mode.
 298
 299 config REGULATOR_HI655X
 300         tristate "Hisilicon HI655X PMIC regulators support"
 301         depends on ARCH_HISI || COMPILE_TEST
 302         depends on MFD_HI655X_PMIC && OF
 303         help
 304           This driver provides support for the voltage regulators of the
 305           Hisilicon Hi655x PMIC device.
 306
 307 config REGULATOR_ISL9305
 308         tristate "Intersil ISL9305 regulator"
 309         depends on I2C
 310         select REGMAP_I2C
 311         help
 312           This driver supports ISL9305 voltage regulator chip.
 313
 314 config REGULATOR_ISL6271A
 315         tristate "Intersil ISL6271A Power regulator"
 316         depends on I2C
 317         help
 318           This driver supports ISL6271A voltage regulator chip.
 319
 320 config REGULATOR_LM363X
 321         tristate "TI LM363X voltage regulators"
 322         depends on MFD_TI_LMU
 323         help
 324           This driver supports LM3631 and LM3632 voltage regulators for
 325           the LCD bias.
 326           One boost output voltage is configurable and always on.
 327           Other LDOs are used for the display module.
 328
 329 config REGULATOR_LP3971
 330         tristate "National Semiconductors LP3971 PMIC regulator driver"
 331         depends on I2C
 332         help
 333          Say Y here to support the voltage regulators and convertors
 334          on National Semiconductors LP3971 PMIC
 335
 336 config REGULATOR_LP3972
 337         tristate "National Semiconductors LP3972 PMIC regulator driver"
 338         depends on I2C
 339         help
 340          Say Y here to support the voltage regulators and convertors
 341          on National Semiconductors LP3972 PMIC
 342
 343 config REGULATOR_LP872X
 344         tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
 345         depends on I2C
 346         select REGMAP_I2C
 347         help
 348           This driver supports LP8720/LP8725 PMIC
 349
 350 config REGULATOR_LP873X
 351         tristate "TI LP873X Power regulators"
 352         depends on MFD_TI_LP873X && OF
 353         help
 354           This driver supports LP873X voltage regulator chips. LP873X
 355           provides two step-down converters and two general-purpose LDO
 356           voltage regulators. It supports software based voltage control
 357           for different voltage domains
 358
 359 config REGULATOR_LP8755
 360         tristate "TI LP8755 High Performance PMU driver"
 361         depends on I2C
 362         select REGMAP_I2C
 363         help
 364           This driver supports LP8755 High Performance PMU driver. This
 365           chip contains six step-down DC/DC converters which can support
 366           9 mode multiphase configuration.
 367
 368 config REGULATOR_LP8788
 369         tristate "TI LP8788 Power Regulators"
 370         depends on MFD_LP8788
 371         help
 372           This driver supports LP8788 voltage regulator chip.
 373
 374 config REGULATOR_LTC3589
 375         tristate "LTC3589 8-output voltage regulator"
 376         depends on I2C
 377         select REGMAP_I2C
 378         help
 379           This enables support for the LTC3589, LTC3589-1, and LTC3589-2
 380           8-output regulators controlled via I2C.
 381
 382 config REGULATOR_LTC3676
 383         tristate "LTC3676 8-output voltage regulator"
 384         depends on I2C
 385         select REGMAP_I2C
 386         help
 387           This enables support for the LTC3676
 388           8-output regulators controlled via I2C.
 389
 390 config REGULATOR_MAX14577
 391         tristate "Maxim 14577/77836 regulator"
 392         depends on MFD_MAX14577
 393         help
 394           This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
 395           The MAX14577 regulators include safeout LDO and charger current
 396           regulator. The MAX77836 has two additional LDOs.
 397
 398 config REGULATOR_MAX1586
 399         tristate "Maxim 1586/1587 voltage regulator"
 400         depends on I2C
 401         help
 402           This driver controls a Maxim 1586 or 1587 voltage output
 403           regulator via I2C bus. The provided regulator is suitable
 404           for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 405
 406 config REGULATOR_MAX77620
 407         tristate "Maxim 77620/MAX20024 voltage regulator"
 408         depends on MFD_MAX77620
 409         help
 410           This driver controls Maxim MAX77620 voltage output regulator
 411           via I2C bus. The provided regulator is suitable for Tegra
 412           chip to control Step-Down DC-DC and LDOs. Say Y here to
 413           enable the regulator driver.
 414
 415 config REGULATOR_MAX8649
 416         tristate "Maxim 8649 voltage regulator"
 417         depends on I2C
 418         select REGMAP_I2C
 419         help
 420           This driver controls a Maxim 8649 voltage output regulator via
 421           I2C bus.
 422
 423 config REGULATOR_MAX8660
 424         tristate "Maxim 8660/8661 voltage regulator"
 425         depends on I2C
 426         help
 427           This driver controls a Maxim 8660/8661 voltage output
 428           regulator via I2C bus.
 429
 430 config REGULATOR_MAX8907
 431         tristate "Maxim 8907 voltage regulator"
 432         depends on MFD_MAX8907
 433         help
 434           This driver controls a Maxim 8907 voltage output regulator
 435           via I2C bus. The provided regulator is suitable for Tegra
 436           chip to control Step-Down DC-DC and LDOs.
 437
 438 config REGULATOR_MAX8925
 439         tristate "Maxim MAX8925 Power Management IC"
 440         depends on MFD_MAX8925
 441         help
 442           Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
 443
 444 config REGULATOR_MAX8952
 445         tristate "Maxim MAX8952 Power Management IC"
 446         depends on I2C
 447         help
 448           This driver controls a Maxim 8952 voltage output regulator
 449           via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
 450           modes ranging from 0.77V to 1.40V by 0.01V steps.
 451
 452 config REGULATOR_MAX8973
 453         tristate "Maxim MAX8973 voltage regulator "
 454         depends on I2C
 455         depends on THERMAL && THERMAL_OF
 456         select REGMAP_I2C
 457         help
 458           The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
 459           switching regulator delievers up to 9A of output current. Each
 460           phase operates at a 2MHz fixed frequency with a 120 deg shift
 461           from the adjacent phase, allowing the use of small magnetic component.
 462
 463 config REGULATOR_MAX8997
 464         tristate "Maxim 8997/8966 regulator"
 465         depends on MFD_MAX8997
 466         help
 467           This driver controls a Maxim 8997/8966 regulator
 468           via I2C bus. The provided regulator is suitable for S5PC110,
 469           S5PV210, and Exynos-4 chips to control VCC_CORE and
 470           VCC_USIM voltages.
 471
 472 config REGULATOR_MAX8998
 473         tristate "Maxim 8998 voltage regulator"
 474         depends on MFD_MAX8998
 475         help
 476           This driver controls a Maxim 8998 voltage output regulator
 477           via I2C bus. The provided regulator is suitable for S3C6410
 478           and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
 479
 480 config REGULATOR_MAX77686
 481         tristate "Maxim 77686 regulator"
 482         depends on MFD_MAX77686
 483         help
 484           This driver controls a Maxim 77686 regulator
 485           via I2C bus. The provided regulator is suitable for
 486           Exynos-4 chips to control VARM and VINT voltages.
 487
 488 config REGULATOR_MAX77693
 489         tristate "Maxim 77693/77843 regulator"
 490         depends on (MFD_MAX77693 || MFD_MAX77843)
 491         help
 492           This driver controls a Maxim 77693/77843 regulators via I2C bus.
 493           The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
 494           and one current regulator 'CHARGER'. This is suitable for
 495           Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
 496
 497 config REGULATOR_MAX77802
 498         tristate "Maxim 77802 regulator"
 499         depends on MFD_MAX77686
 500         help
 501           This driver controls a Maxim 77802 regulator
 502           via I2C bus. The provided regulator is suitable for
 503           Exynos5420/Exynos5800 SoCs to control various voltages.
 504           It includes support for control of voltage and ramp speed.
 505
 506 config REGULATOR_MC13XXX_CORE
 507         tristate
 508
 509 config REGULATOR_MC13783
 510         tristate "Freescale MC13783 regulator driver"
 511         depends on MFD_MC13XXX
 512         select REGULATOR_MC13XXX_CORE
 513         help
 514           Say y here to support the regulators found on the Freescale MC13783
 515           PMIC.
 516
 517 config REGULATOR_MC13892
 518         tristate "Freescale MC13892 regulator driver"
 519         depends on MFD_MC13XXX
 520         select REGULATOR_MC13XXX_CORE
 521         help
 522           Say y here to support the regulators found on the Freescale MC13892
 523           PMIC.
 524
 525 config REGULATOR_MT6311
 526         tristate "MediaTek MT6311 PMIC"
 527         depends on I2C
 528         select REGMAP_I2C
 529         help
 530           Say y here to select this option to enable the power regulator of
 531           MediaTek MT6311 PMIC.
 532           This driver supports the control of different power rails of device
 533           through regulator interface.
 534
 535 config REGULATOR_MT6323
 536         tristate "MediaTek MT6323 PMIC"
 537         depends on MFD_MT6397
 538         help
 539           Say y here to select this option to enable the power regulator of
 540           MediaTek MT6323 PMIC.
 541           This driver supports the control of different power rails of device
 542           through regulator interface.
 543
 544 config REGULATOR_MT6397
 545         tristate "MediaTek MT6397 PMIC"
 546         depends on MFD_MT6397
 547         help
 548           Say y here to select this option to enable the power regulator of
 549           MediaTek MT6397 PMIC.
 550           This driver supports the control of different power rails of device
 551           through regulator interface.
 552
 553 config REGULATOR_PALMAS
 554         tristate "TI Palmas PMIC Regulators"
 555         depends on MFD_PALMAS
 556         help
 557           If you wish to control the regulators on the Palmas series of
 558           chips say Y here. This will enable support for all the software
 559           controllable SMPS/LDO regulators.
 560
 561           The regulators available on Palmas series chips vary depending
 562           on the muxing. This is handled automatically in the driver by
 563           reading the mux info from OTP.
 564
 565 config REGULATOR_PBIAS
 566         tristate "PBIAS OMAP regulator driver"
 567         depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
 568         help
 569          Say y here to support pbias regulator for mmc1:SD card i/o
 570          on OMAP SoCs.
 571          This driver provides support for OMAP pbias modelled
 572          regulators.
 573
 574 config REGULATOR_PCAP
 575         tristate "Motorola PCAP2 regulator driver"
 576         depends on EZX_PCAP
 577         help
 578          This driver provides support for the voltage regulators of the
 579          PCAP2 PMIC.
 580
 581 config REGULATOR_PCF50633
 582         tristate "NXP PCF50633 regulator driver"
 583         depends on MFD_PCF50633
 584         help
 585          Say Y here to support the voltage regulators and convertors
 586          on PCF50633
 587
 588 config REGULATOR_PFUZE100
 589         tristate "Freescale PFUZE100/200/3000 regulator driver"
 590         depends on I2C
 591         select REGMAP_I2C
 592         help
 593           Say y here to support the regulators found on the Freescale
 594           PFUZE100/200/3000 PMIC.
 595
 596 config REGULATOR_PV88060
 597         tristate "Powerventure Semiconductor PV88060 regulator"
 598         depends on I2C
 599         select REGMAP_I2C
 600         help
 601           Say y here to support the voltage regulators and convertors
 602           PV88060
 603
 604 config REGULATOR_PV88080
 605         tristate "Powerventure Semiconductor PV88080 regulator"
 606         depends on I2C
 607         select REGMAP_I2C
 608         help
 609           Say y here to support the buck convertors on PV88080
 610
 611 config REGULATOR_PV88090
 612         tristate "Powerventure Semiconductor PV88090 regulator"
 613         depends on I2C
 614         select REGMAP_I2C
 615         help
 616           Say y here to support the voltage regulators and convertors
 617           on PV88090
 618
 619 config REGULATOR_PWM
 620         tristate "PWM voltage regulator"
 621         depends on PWM
 622         help
 623           This driver supports PWM controlled voltage regulators. PWM
 624           duty cycle can increase or decrease the voltage.
 625
 626 config REGULATOR_QCOM_RPM
 627         tristate "Qualcomm RPM regulator driver"
 628         depends on MFD_QCOM_RPM
 629         help
 630           If you say yes to this option, support will be included for the
 631           regulators exposed by the Resource Power Manager found in Qualcomm
 632           8660, 8960 and 8064 based devices.
 633
 634           Say M here if you want to include support for the regulators on the
 635           Qualcomm RPM as a module. The module will be named
 636           "qcom_rpm-regulator".
 637
 638 config REGULATOR_QCOM_SMD_RPM
 639         tristate "Qualcomm SMD based RPM regulator driver"
 640         depends on QCOM_SMD_RPM
 641         help
 642           If you say yes to this option, support will be included for the
 643           regulators exposed by the Resource Power Manager found in Qualcomm
 644           8974 based devices.
 645
 646           Say M here if you want to include support for the regulators on the
 647           Qualcomm RPM as a module. The module will be named
 648           "qcom_smd-regulator".
 649
 650 config REGULATOR_QCOM_SPMI
 651         tristate "Qualcomm SPMI regulator driver"
 652         depends on SPMI || COMPILE_TEST
 653         help
 654           If you say yes to this option, support will be included for the
 655           regulators found in Qualcomm SPMI PMICs.
 656
 657           Say M here if you want to include support for the regulators on the
 658           Qualcomm SPMI PMICs as a module. The module will be named
 659           "qcom_spmi-regulator".
 660
 661 config REGULATOR_RC5T583
 662         tristate "RICOH RC5T583 Power regulators"
 663         depends on MFD_RC5T583
 664         help
 665           Select this option to enable the power regulator of RICOH
 666           PMIC RC5T583.
 667           This driver supports the control of different power rails of device
 668           through regulator interface. The device supports multiple DCDC/LDO
 669           outputs which can be controlled by i2c communication.
 670
 671 config REGULATOR_RK808
 672         tristate "Rockchip RK808/RK818 Power regulators"
 673         depends on MFD_RK808
 674         help
 675           Select this option to enable the power regulator of ROCKCHIP
 676           PMIC RK808 and RK818.
 677           This driver supports the control of different power rails of device
 678           through regulator interface. The device supports multiple DCDC/LDO
 679           outputs which can be controlled by i2c communication.
 680
 681 config REGULATOR_RN5T618
 682         tristate "Ricoh RN5T567/618 voltage regulators"
 683         depends on MFD_RN5T618
 684         help
 685           Say y here to support the regulators found on Ricoh RN5T567 or
 686           RN5T618 PMIC.
 687
 688 config REGULATOR_RT5033
 689         tristate "Richtek RT5033 Regulators"
 690         depends on MFD_RT5033
 691         help
 692           This adds support for voltage and current regulators in Richtek
 693           RT5033 PMIC. The device supports multiple regulators like
 694           current source, LDO and Buck.
 695
 696 config REGULATOR_S2MPA01
 697         tristate "Samsung S2MPA01 voltage regulator"
 698         depends on MFD_SEC_CORE
 699         help
 700          This driver controls Samsung S2MPA01 voltage output regulator
 701          via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 702
 703 config REGULATOR_S2MPS11
 704         tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
 705         depends on MFD_SEC_CORE
 706         help
 707          This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
 708          output regulator via I2C bus. The chip is comprised of high efficient
 709          Buck converters including Dual-Phase Buck converter, Buck-Boost
 710          converter, various LDOs.
 711
 712 config REGULATOR_S5M8767
 713         tristate "Samsung S5M8767A voltage regulator"
 714         depends on MFD_SEC_CORE
 715         help
 716          This driver supports a Samsung S5M8767A voltage output regulator
 717          via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
 718          supports DVS mode with 8bits of output voltage control.
 719
 720 config REGULATOR_SKY81452
 721         tristate "Skyworks Solutions SKY81452 voltage regulator"
 722         depends on MFD_SKY81452
 723         help
 724           This driver supports Skyworks SKY81452 voltage output regulator
 725           via I2C bus. SKY81452 has one voltage linear regulator can be
 726           programmed from 4.5V to 20V.
 727
 728           This driver can also be built as a module. If so, the module
 729           will be called sky81452-regulator.
 730
 731 config REGULATOR_TI_ABB
 732         tristate "TI Adaptive Body Bias on-chip LDO"
 733         depends on ARCH_OMAP
 734         help
 735           Select this option to support Texas Instruments' on-chip Adaptive Body
 736           Bias (ABB) LDO regulators. It is recommended that this option be
 737           enabled on required TI SoC. Certain Operating Performance Points
 738           on TI SoCs may be unstable without enabling this as it provides
 739           device specific optimized bias to allow/optimize functionality.
 740
 741 config REGULATOR_STW481X_VMMC
 742         bool "ST Microelectronics STW481X VMMC regulator"
 743         depends on MFD_STW481X || COMPILE_TEST
 744         default y if MFD_STW481X
 745         help
 746           This driver supports the internal VMMC regulator in the STw481x
 747           PMIC chips.
 748
 749 config REGULATOR_TPS51632
 750         tristate "TI TPS51632 Power Regulator"
 751         depends on I2C
 752         select REGMAP_I2C
 753         help
 754           This driver supports TPS51632 voltage regulator chip.
 755           The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
 756           with Serial VID control and DVFS.
 757           The voltage output can be configure through I2C interface or PWM
 758           interface.
 759
 760 config REGULATOR_TPS6105X
 761         tristate "TI TPS6105X Power regulators"
 762         depends on TPS6105X
 763         default y if TPS6105X
 764         help
 765           This driver supports TPS61050/TPS61052 voltage regulator chips.
 766           It is a single boost converter primarily for white LEDs and
 767           audio amplifiers.
 768
 769 config REGULATOR_TPS62360
 770         tristate "TI TPS6236x Power Regulator"
 771         depends on I2C
 772         select REGMAP_I2C
 773         help
 774           This driver supports TPS6236x voltage regulator chip. This
 775           regulator is meant for processor core supply. This chip is
 776           high-frequency synchronous step down dc-dc converter optimized
 777           for battery-powered portable applications.
 778
 779 config REGULATOR_TPS65023
 780         tristate "TI TPS65023 Power regulators"
 781         depends on I2C
 782         select REGMAP_I2C
 783         help
 784           This driver supports TPS65023 voltage regulator chips. TPS65023 provides
 785           three step-down converters and two general-purpose LDO voltage regulators.
 786           It supports TI's software based Class-2 SmartReflex implementation.
 787
 788 config REGULATOR_TPS6507X
 789         tristate "TI TPS6507X Power regulators"
 790         depends on I2C
 791         help
 792           This driver supports TPS6507X voltage regulator chips. TPS6507X provides
 793           three step-down converters and two general-purpose LDO voltage regulators.
 794           It supports TI's software based Class-2 SmartReflex implementation.
 795
 796 config REGULATOR_TPS65086
 797         tristate "TI TPS65086 Power regulators"
 798         depends on MFD_TPS65086
 799         help
 800           This driver provides support for the voltage regulators on
 801           TI TPS65086 PMICs.
 802
 803 config REGULATOR_TPS65090
 804         tristate "TI TPS65090 Power regulator"
 805         depends on MFD_TPS65090
 806         help
 807           This driver provides support for the voltage regulators on the
 808           TI TPS65090 PMIC.
 809
 810 config REGULATOR_TPS65132
 811         tristate "TI TPS65132 Dual Output Power regulators"
 812         depends on I2C && GPIOLIB
 813         select REGMAP_I2C
 814         help
 815           This driver supports TPS65132 single inductor - dual output
 816           power supply specifcally designed for display panels.
 817
 818 config REGULATOR_TPS65217
 819         tristate "TI TPS65217 Power regulators"
 820         depends on MFD_TPS65217
 821         help
 822           This driver supports TPS65217 voltage regulator chips. TPS65217
 823           provides three step-down converters and four general-purpose LDO
 824           voltage regulators. It supports software based voltage control
 825           for different voltage domains
 826
 827 config REGULATOR_TPS65218
 828         tristate "TI TPS65218 Power regulators"
 829         depends on MFD_TPS65218 && OF
 830         help
 831           This driver supports TPS65218 voltage regulator chips. TPS65218
 832           provides six step-down converters and one general-purpose LDO
 833           voltage regulators. It supports software based voltage control
 834           for different voltage domains
 835
 836 config REGULATOR_TPS6524X
 837         tristate "TI TPS6524X Power regulators"
 838         depends on SPI
 839         help
 840           This driver supports TPS6524X voltage regulator chips. TPS6524X
 841           provides three step-down converters and two general-purpose LDO
 842           voltage regulators.  This device is interfaced using a customized
 843           serial interface currently supported on the sequencer serial
 844           port controller.
 845
 846 config REGULATOR_TPS6586X
 847         tristate "TI TPS6586X Power regulators"
 848         depends on MFD_TPS6586X
 849         help
 850           This driver supports TPS6586X voltage regulator chips.
 851
 852 config REGULATOR_TPS65910
 853         tristate "TI TPS65910/TPS65911 Power Regulators"
 854         depends on MFD_TPS65910
 855         help
 856           This driver supports TPS65910/TPS65911 voltage regulator chips.
 857
 858 config REGULATOR_TPS65912
 859         tristate "TI TPS65912 Power regulator"
 860         depends on MFD_TPS65912
 861         help
 862             This driver supports TPS65912 voltage regulator chip.
 863
 864 config REGULATOR_TPS80031
 865         tristate "TI TPS80031/TPS80032 power regulator driver"
 866         depends on MFD_TPS80031
 867         help
 868           TPS80031/ TPS80032 Fully Integrated Power Management with Power
 869           Path and Battery Charger. It has 5 configurable step-down
 870           converters, 11 general purpose LDOs, VBUS generator and digital
 871           output to control regulators.
 872
 873 config REGULATOR_TWL4030
 874         tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 875         depends on TWL4030_CORE
 876         help
 877           This driver supports the voltage regulators provided by
 878           this family of companion chips.
 879
 880 config REGULATOR_VEXPRESS
 881         tristate "Versatile Express regulators"
 882         depends on VEXPRESS_CONFIG
 883         help
 884           This driver provides support for voltage regulators available
 885           on the ARM Ltd's Versatile Express platform.
 886
 887 config REGULATOR_WM831X
 888         tristate "Wolfson Microelectronics WM831x PMIC regulators"
 889         depends on MFD_WM831X
 890         help
 891           Support the voltage and current regulators of the WM831x series
 892           of PMIC devices.
 893
 894 config REGULATOR_WM8350
 895         tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
 896         depends on MFD_WM8350
 897         help
 898           This driver provides support for the voltage and current regulators
 899           of the WM8350 AudioPlus PMIC.
 900
 901 config REGULATOR_WM8400
 902         tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
 903         depends on MFD_WM8400
 904         help
 905           This driver provides support for the voltage regulators of the
 906           WM8400 AudioPlus PMIC.
 907
 908 config REGULATOR_WM8994
 909         tristate "Wolfson Microelectronics WM8994 CODEC"
 910         depends on MFD_WM8994
 911         help
 912           This driver provides support for the voltage regulators on the
 913           WM8994 CODEC.
 914
 915 endif
 916