UBUNTU: Ubuntu-4.15.0-96.97

[mirror_ubuntu-bionic-kernel.git] / drivers / ata / sata_dwc_460ex.c

/*
 * drivers/ata/sata_dwc_460ex.c
 *
 * Synopsys DesignWare Cores (DWC) SATA host driver
 *
 * Author: Mark Miesfeld <mmiesfeld@amcc.com>
 *
 * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
 * Copyright 2008 DENX Software Engineering
 *
 * Based on versions provided by AMCC and Synopsys which are:
 *          Copyright 2006 Applied Micro Circuits Corporation
 *          COPYRIGHT (C) 2005  SYNOPSYS, INC.  ALL RIGHTS RESERVED
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#ifdef CONFIG_SATA_DWC_DEBUG
#define DEBUG
#endif

#ifdef CONFIG_SATA_DWC_VDEBUG
#define VERBOSE_DEBUG
#define DEBUG_NCQ
#endif

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/libata.h>
#include <linux/slab.h>

#include "libata.h"

#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>

/* These two are defined in "libata.h" */
#undef  DRV_NAME
#undef  DRV_VERSION

#define DRV_NAME        "sata-dwc"
#define DRV_VERSION     "1.3"

#define sata_dwc_writel(a, v)   writel_relaxed(v, a)
#define sata_dwc_readl(a)       readl_relaxed(a)

#ifndef NO_IRQ
#define NO_IRQ          0
#endif

#define AHB_DMA_BRST_DFLT       64      /* 16 data items burst length */

enum {
        SATA_DWC_MAX_PORTS = 1,

        SATA_DWC_SCR_OFFSET = 0x24,
        SATA_DWC_REG_OFFSET = 0x64,
};

/* DWC SATA Registers */
struct sata_dwc_regs {
        u32 fptagr;             /* 1st party DMA tag */
        u32 fpbor;              /* 1st party DMA buffer offset */
        u32 fptcr;              /* 1st party DMA Xfr count */
        u32 dmacr;              /* DMA Control */
        u32 dbtsr;              /* DMA Burst Transac size */
        u32 intpr;              /* Interrupt Pending */
        u32 intmr;              /* Interrupt Mask */
        u32 errmr;              /* Error Mask */
        u32 llcr;               /* Link Layer Control */
        u32 phycr;              /* PHY Control */
        u32 physr;              /* PHY Status */
        u32 rxbistpd;           /* Recvd BIST pattern def register */
        u32 rxbistpd1;          /* Recvd BIST data dword1 */
        u32 rxbistpd2;          /* Recvd BIST pattern data dword2 */
        u32 txbistpd;           /* Trans BIST pattern def register */
        u32 txbistpd1;          /* Trans BIST data dword1 */
        u32 txbistpd2;          /* Trans BIST data dword2 */
        u32 bistcr;             /* BIST Control Register */
        u32 bistfctr;           /* BIST FIS Count Register */
        u32 bistsr;             /* BIST Status Register */
        u32 bistdecr;           /* BIST Dword Error count register */
        u32 res[15];            /* Reserved locations */
        u32 testr;              /* Test Register */
        u32 versionr;           /* Version Register */
        u32 idr;                /* ID Register */
        u32 unimpl[192];        /* Unimplemented */
        u32 dmadr[256];         /* FIFO Locations in DMA Mode */
};

enum {
        SCR_SCONTROL_DET_ENABLE =       0x00000001,
        SCR_SSTATUS_DET_PRESENT =       0x00000001,
        SCR_SERROR_DIAG_X       =       0x04000000,
/* DWC SATA Register Operations */
        SATA_DWC_TXFIFO_DEPTH   =       0x01FF,
        SATA_DWC_RXFIFO_DEPTH   =       0x01FF,
        SATA_DWC_DMACR_TMOD_TXCHEN =    0x00000004,
        SATA_DWC_DMACR_TXCHEN   = (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN),
        SATA_DWC_DMACR_RXCHEN   = (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN),
        SATA_DWC_DMACR_TXRXCH_CLEAR =   SATA_DWC_DMACR_TMOD_TXCHEN,
        SATA_DWC_INTPR_DMAT     =       0x00000001,
        SATA_DWC_INTPR_NEWFP    =       0x00000002,
        SATA_DWC_INTPR_PMABRT   =       0x00000004,
        SATA_DWC_INTPR_ERR      =       0x00000008,
        SATA_DWC_INTPR_NEWBIST  =       0x00000010,
        SATA_DWC_INTPR_IPF      =       0x10000000,
        SATA_DWC_INTMR_DMATM    =       0x00000001,
        SATA_DWC_INTMR_NEWFPM   =       0x00000002,
        SATA_DWC_INTMR_PMABRTM  =       0x00000004,
        SATA_DWC_INTMR_ERRM     =       0x00000008,
        SATA_DWC_INTMR_NEWBISTM =       0x00000010,
        SATA_DWC_LLCR_SCRAMEN   =       0x00000001,
        SATA_DWC_LLCR_DESCRAMEN =       0x00000002,
        SATA_DWC_LLCR_RPDEN     =       0x00000004,
/* This is all error bits, zero's are reserved fields. */
        SATA_DWC_SERROR_ERR_BITS =      0x0FFF0F03
};

#define SATA_DWC_SCR0_SPD_GET(v)        (((v) >> 4) & 0x0000000F)
#define SATA_DWC_DMACR_TX_CLEAR(v)      (((v) & ~SATA_DWC_DMACR_TXCHEN) |\
                                                 SATA_DWC_DMACR_TMOD_TXCHEN)
#define SATA_DWC_DMACR_RX_CLEAR(v)      (((v) & ~SATA_DWC_DMACR_RXCHEN) |\
                                                 SATA_DWC_DMACR_TMOD_TXCHEN)
#define SATA_DWC_DBTSR_MWR(size)        (((size)/4) & SATA_DWC_TXFIFO_DEPTH)
#define SATA_DWC_DBTSR_MRD(size)        ((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\
                                                 << 16)
struct sata_dwc_device {
        struct device           *dev;           /* generic device struct */
        struct ata_probe_ent    *pe;            /* ptr to probe-ent */
        struct ata_host         *host;
        struct sata_dwc_regs __iomem *sata_dwc_regs;    /* DW SATA specific */
        u32                     sactive_issued;
        u32                     sactive_queued;
        struct phy              *phy;
        phys_addr_t             dmadr;
#ifdef CONFIG_SATA_DWC_OLD_DMA
        struct dw_dma_chip      *dma;
#endif
};

#define SATA_DWC_QCMD_MAX       32

struct sata_dwc_device_port {
        struct sata_dwc_device  *hsdev;
        int                     cmd_issued[SATA_DWC_QCMD_MAX];
        int                     dma_pending[SATA_DWC_QCMD_MAX];

        /* DMA info */
        struct dma_chan                 *chan;
        struct dma_async_tx_descriptor  *desc[SATA_DWC_QCMD_MAX];
        u32                             dma_interrupt_count;
};

/*
 * Commonly used DWC SATA driver macros
 */
#define HSDEV_FROM_HOST(host)   ((struct sata_dwc_device *)(host)->private_data)
#define HSDEV_FROM_AP(ap)       ((struct sata_dwc_device *)(ap)->host->private_data)
#define HSDEVP_FROM_AP(ap)      ((struct sata_dwc_device_port *)(ap)->private_data)
#define HSDEV_FROM_QC(qc)       ((struct sata_dwc_device *)(qc)->ap->host->private_data)
#define HSDEV_FROM_HSDEVP(p)    ((struct sata_dwc_device *)(p)->hsdev)

enum {
        SATA_DWC_CMD_ISSUED_NOT         = 0,
        SATA_DWC_CMD_ISSUED_PEND        = 1,
        SATA_DWC_CMD_ISSUED_EXEC        = 2,
        SATA_DWC_CMD_ISSUED_NODATA      = 3,

        SATA_DWC_DMA_PENDING_NONE       = 0,
        SATA_DWC_DMA_PENDING_TX         = 1,
        SATA_DWC_DMA_PENDING_RX         = 2,
};

/*
 * Prototypes
 */
static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag);
static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
                                u32 check_status);
static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
static void sata_dwc_port_stop(struct ata_port *ap);
static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);

#ifdef CONFIG_SATA_DWC_OLD_DMA

#include <linux/platform_data/dma-dw.h>
#include <linux/dma/dw.h>

static struct dw_dma_slave sata_dwc_dma_dws = {
        .src_id = 0,
        .dst_id = 0,
        .m_master = 1,
        .p_master = 0,
};

static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
{
        struct dw_dma_slave *dws = &sata_dwc_dma_dws;

        if (dws->dma_dev != chan->device->dev)
                return false;

        chan->private = dws;
        return true;
}

static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
{
        struct sata_dwc_device *hsdev = hsdevp->hsdev;
        struct dw_dma_slave *dws = &sata_dwc_dma_dws;
        dma_cap_mask_t mask;

        dws->dma_dev = hsdev->dev;

        dma_cap_zero(mask);
        dma_cap_set(DMA_SLAVE, mask);

        /* Acquire DMA channel */
        hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
        if (!hsdevp->chan) {
                dev_err(hsdev->dev, "%s: dma channel unavailable\n",
                         __func__);
                return -EAGAIN;
        }

        return 0;
}

static int sata_dwc_dma_init_old(struct platform_device *pdev,
                                 struct sata_dwc_device *hsdev)
{
        struct device_node *np = pdev->dev.of_node;
        struct resource *res;

        hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
        if (!hsdev->dma)
                return -ENOMEM;

        hsdev->dma->dev = &pdev->dev;
        hsdev->dma->id = pdev->id;

        /* Get SATA DMA interrupt number */
        hsdev->dma->irq = irq_of_parse_and_map(np, 1);
        if (hsdev->dma->irq == NO_IRQ) {
                dev_err(&pdev->dev, "no SATA DMA irq\n");
                return -ENODEV;
        }

        /* Get physical SATA DMA register base address */
        res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
        hsdev->dma->regs = devm_ioremap_resource(&pdev->dev, res);
        if (IS_ERR(hsdev->dma->regs))
                return PTR_ERR(hsdev->dma->regs);

        /* Initialize AHB DMAC */
        return dw_dma_probe(hsdev->dma);
}

static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
{
        if (!hsdev->dma)
                return;

        dw_dma_remove(hsdev->dma);
}

#endif

static const char *get_prot_descript(u8 protocol)
{
        switch (protocol) {
        case ATA_PROT_NODATA:
                return "ATA no data";
        case ATA_PROT_PIO:
                return "ATA PIO";
        case ATA_PROT_DMA:
                return "ATA DMA";
        case ATA_PROT_NCQ:
                return "ATA NCQ";
        case ATA_PROT_NCQ_NODATA:
                return "ATA NCQ no data";
        case ATAPI_PROT_NODATA:
                return "ATAPI no data";
        case ATAPI_PROT_PIO:
                return "ATAPI PIO";
        case ATAPI_PROT_DMA:
                return "ATAPI DMA";
        default:
                return "unknown";
        }
}

static const char *get_dma_dir_descript(int dma_dir)
{
        switch ((enum dma_data_direction)dma_dir) {
        case DMA_BIDIRECTIONAL:
                return "bidirectional";
        case DMA_TO_DEVICE:
                return "to device";
        case DMA_FROM_DEVICE:
                return "from device";
        default:
                return "none";
        }
}

static void sata_dwc_tf_dump(struct ata_port *ap, struct ata_taskfile *tf)
{
        dev_vdbg(ap->dev,
                "taskfile cmd: 0x%02x protocol: %s flags: 0x%lx device: %x\n",
                tf->command, get_prot_descript(tf->protocol), tf->flags,
                tf->device);
        dev_vdbg(ap->dev,
                "feature: 0x%02x nsect: 0x%x lbal: 0x%x lbam: 0x%x lbah: 0x%x\n",
                tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah);
        dev_vdbg(ap->dev,
                "hob_feature: 0x%02x hob_nsect: 0x%x hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
                tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
                tf->hob_lbah);
}

static void dma_dwc_xfer_done(void *hsdev_instance)
{
        unsigned long flags;
        struct sata_dwc_device *hsdev = hsdev_instance;
        struct ata_host *host = (struct ata_host *)hsdev->host;
        struct ata_port *ap;
        struct sata_dwc_device_port *hsdevp;
        u8 tag = 0;
        unsigned int port = 0;

        spin_lock_irqsave(&host->lock, flags);
        ap = host->ports[port];
        hsdevp = HSDEVP_FROM_AP(ap);
        tag = ap->link.active_tag;

        /*
         * Each DMA command produces 2 interrupts.  Only
         * complete the command after both interrupts have been
         * seen. (See sata_dwc_isr())
         */
        hsdevp->dma_interrupt_count++;
        sata_dwc_clear_dmacr(hsdevp, tag);

        if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
                dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n",
                        tag, hsdevp->dma_pending[tag]);
        }

        if ((hsdevp->dma_interrupt_count % 2) == 0)
                sata_dwc_dma_xfer_complete(ap, 1);

        spin_unlock_irqrestore(&host->lock, flags);
}

static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc)
{
        struct ata_port *ap = qc->ap;
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
        struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
        struct dma_slave_config sconf;
        struct dma_async_tx_descriptor *desc;

        if (qc->dma_dir == DMA_DEV_TO_MEM) {
                sconf.src_addr = hsdev->dmadr;
                sconf.device_fc = false;
        } else {        /* DMA_MEM_TO_DEV */
                sconf.dst_addr = hsdev->dmadr;
                sconf.device_fc = false;
        }

        sconf.direction = qc->dma_dir;
        sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4;     /* in items */
        sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4;     /* in items */
        sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
        sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;

        dmaengine_slave_config(hsdevp->chan, &sconf);

        /* Convert SG list to linked list of items (LLIs) for AHB DMA */
        desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem,
                                       qc->dma_dir,
                                       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);

        if (!desc)
                return NULL;

        desc->callback = dma_dwc_xfer_done;
        desc->callback_param = hsdev;

        dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pa\n", __func__,
                qc->sg, qc->n_elem, &hsdev->dmadr);

        return desc;
}

static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
{
        if (scr > SCR_NOTIFICATION) {
                dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
                        __func__, scr);
                return -EINVAL;
        }

        *val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
        dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
                link->ap->print_id, scr, *val);

        return 0;
}

static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
{
        dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
                link->ap->print_id, scr, val);
        if (scr > SCR_NOTIFICATION) {
                dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
                         __func__, scr);
                return -EINVAL;
        }
        sata_dwc_writel(link->ap->ioaddr.scr_addr + (scr * 4), val);

        return 0;
}

static void clear_serror(struct ata_port *ap)
{
        u32 val;
        sata_dwc_scr_read(&ap->link, SCR_ERROR, &val);
        sata_dwc_scr_write(&ap->link, SCR_ERROR, val);
}

static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
{
        sata_dwc_writel(&hsdev->sata_dwc_regs->intpr,
                        sata_dwc_readl(&hsdev->sata_dwc_regs->intpr));
}

static u32 qcmd_tag_to_mask(u8 tag)
{
        return 0x00000001 << (tag & 0x1f);
}

/* See ahci.c */
static void sata_dwc_error_intr(struct ata_port *ap,
                                struct sata_dwc_device *hsdev, uint intpr)
{
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
        struct ata_eh_info *ehi = &ap->link.eh_info;
        unsigned int err_mask = 0, action = 0;
        struct ata_queued_cmd *qc;
        u32 serror;
        u8 status, tag;

        ata_ehi_clear_desc(ehi);

        sata_dwc_scr_read(&ap->link, SCR_ERROR, &serror);
        status = ap->ops->sff_check_status(ap);

        tag = ap->link.active_tag;

        dev_err(ap->dev,
                "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d",
                __func__, serror, intpr, status, hsdevp->dma_interrupt_count,
                hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);

        /* Clear error register and interrupt bit */
        clear_serror(ap);
        clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);

        /* This is the only error happening now.  TODO check for exact error */

        err_mask |= AC_ERR_HOST_BUS;
        action |= ATA_EH_RESET;

        /* Pass this on to EH */
        ehi->serror |= serror;
        ehi->action |= action;

        qc = ata_qc_from_tag(ap, tag);
        if (qc)
                qc->err_mask |= err_mask;
        else
                ehi->err_mask |= err_mask;

        ata_port_abort(ap);
}

/*
 * Function : sata_dwc_isr
 * arguments : irq, void *dev_instance, struct pt_regs *regs
 * Return value : irqreturn_t - status of IRQ
 * This Interrupt handler called via port ops registered function.
 * .irq_handler = sata_dwc_isr
 */
static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
{
        struct ata_host *host = (struct ata_host *)dev_instance;
        struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host);
        struct ata_port *ap;
        struct ata_queued_cmd *qc;
        unsigned long flags;
        u8 status, tag;
        int handled, num_processed, port = 0;
        uint intpr, sactive, sactive2, tag_mask;
        struct sata_dwc_device_port *hsdevp;
        hsdev->sactive_issued = 0;

        spin_lock_irqsave(&host->lock, flags);

        /* Read the interrupt register */
        intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr);

        ap = host->ports[port];
        hsdevp = HSDEVP_FROM_AP(ap);

        dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr,
                ap->link.active_tag);

        /* Check for error interrupt */
        if (intpr & SATA_DWC_INTPR_ERR) {
                sata_dwc_error_intr(ap, hsdev, intpr);
                handled = 1;
                goto DONE;
        }

        /* Check for DMA SETUP FIS (FP DMA) interrupt */
        if (intpr & SATA_DWC_INTPR_NEWFP) {
                clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);

                tag = (u8)(sata_dwc_readl(&hsdev->sata_dwc_regs->fptagr));
                dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
                if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
                        dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);

                hsdev->sactive_issued |= qcmd_tag_to_mask(tag);

                qc = ata_qc_from_tag(ap, tag);
                /*
                 * Start FP DMA for NCQ command.  At this point the tag is the
                 * active tag.  It is the tag that matches the command about to
                 * be completed.
                 */
                qc->ap->link.active_tag = tag;
                sata_dwc_bmdma_start_by_tag(qc, tag);

                handled = 1;
                goto DONE;
        }
        sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
        tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;

        /* If no sactive issued and tag_mask is zero then this is not NCQ */
        if (hsdev->sactive_issued == 0 && tag_mask == 0) {
                if (ap->link.active_tag == ATA_TAG_POISON)
                        tag = 0;
                else
                        tag = ap->link.active_tag;
                qc = ata_qc_from_tag(ap, tag);

                /* DEV interrupt w/ no active qc? */
                if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
                        dev_err(ap->dev,
                                "%s interrupt with no active qc qc=%p\n",
                                __func__, qc);
                        ap->ops->sff_check_status(ap);
                        handled = 1;
                        goto DONE;
                }
                status = ap->ops->sff_check_status(ap);

                qc->ap->link.active_tag = tag;
                hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;

                if (status & ATA_ERR) {
                        dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status);
                        sata_dwc_qc_complete(ap, qc, 1);
                        handled = 1;
                        goto DONE;
                }

                dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
                        __func__, get_prot_descript(qc->tf.protocol));
DRVSTILLBUSY:
                if (ata_is_dma(qc->tf.protocol)) {
                        /*
                         * Each DMA transaction produces 2 interrupts. The DMAC
                         * transfer complete interrupt and the SATA controller
                         * operation done interrupt. The command should be
                         * completed only after both interrupts are seen.
                         */
                        hsdevp->dma_interrupt_count++;
                        if (hsdevp->dma_pending[tag] == \
                                        SATA_DWC_DMA_PENDING_NONE) {
                                dev_err(ap->dev,
                                        "%s: DMA not pending intpr=0x%08x status=0x%08x pending=%d\n",
                                        __func__, intpr, status,
                                        hsdevp->dma_pending[tag]);
                        }

                        if ((hsdevp->dma_interrupt_count % 2) == 0)
                                sata_dwc_dma_xfer_complete(ap, 1);
                } else if (ata_is_pio(qc->tf.protocol)) {
                        ata_sff_hsm_move(ap, qc, status, 0);
                        handled = 1;
                        goto DONE;
                } else {
                        if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
                                goto DRVSTILLBUSY;
                }

                handled = 1;
                goto DONE;
        }

        /*
         * This is a NCQ command. At this point we need to figure out for which
         * tags we have gotten a completion interrupt.  One interrupt may serve
         * as completion for more than one operation when commands are queued
         * (NCQ).  We need to process each completed command.
         */

         /* process completed commands */
        sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
        tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;

        if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) {
                dev_dbg(ap->dev,
                        "%s NCQ:sactive=0x%08x  sactive_issued=0x%08x tag_mask=0x%08x\n",
                        __func__, sactive, hsdev->sactive_issued, tag_mask);
        }

        if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) {
                dev_warn(ap->dev,
                         "Bad tag mask?  sactive=0x%08x sactive_issued=0x%08x  tag_mask=0x%08x\n",
                         sactive, hsdev->sactive_issued, tag_mask);
        }

        /* read just to clear ... not bad if currently still busy */
        status = ap->ops->sff_check_status(ap);
        dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status);

        tag = 0;
        num_processed = 0;
        while (tag_mask) {
                num_processed++;
                while (!(tag_mask & 0x00000001)) {
                        tag++;
                        tag_mask <<= 1;
                }

                tag_mask &= (~0x00000001);
                qc = ata_qc_from_tag(ap, tag);

                /* To be picked up by completion functions */
                qc->ap->link.active_tag = tag;
                hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;

                /* Let libata/scsi layers handle error */
                if (status & ATA_ERR) {
                        dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__,
                                status);
                        sata_dwc_qc_complete(ap, qc, 1);
                        handled = 1;
                        goto DONE;
                }

                /* Process completed command */
                dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
                        get_prot_descript(qc->tf.protocol));
                if (ata_is_dma(qc->tf.protocol)) {
                        hsdevp->dma_interrupt_count++;
                        if (hsdevp->dma_pending[tag] == \
                                        SATA_DWC_DMA_PENDING_NONE)
                                dev_warn(ap->dev, "%s: DMA not pending?\n",
                                        __func__);
                        if ((hsdevp->dma_interrupt_count % 2) == 0)
                                sata_dwc_dma_xfer_complete(ap, 1);
                } else {
                        if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
                                goto STILLBUSY;
                }
                continue;

STILLBUSY:
                ap->stats.idle_irq++;
                dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n",
                        ap->print_id);
        } /* while tag_mask */

        /*
         * Check to see if any commands completed while we were processing our
         * initial set of completed commands (read status clears interrupts,
         * so we might miss a completed command interrupt if one came in while
         * we were processing --we read status as part of processing a completed
         * command).
         */
        sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive2);
        if (sactive2 != sactive) {
                dev_dbg(ap->dev,
                        "More completed - sactive=0x%x sactive2=0x%x\n",
                        sactive, sactive2);
        }
        handled = 1;

DONE:
        spin_unlock_irqrestore(&host->lock, flags);
        return IRQ_RETVAL(handled);
}

static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
{
        struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
        u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr);

        if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
                dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr);
                sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
        } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
                dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr);
                sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
        } else {
                /*
                 * This should not happen, it indicates the driver is out of
                 * sync.  If it does happen, clear dmacr anyway.
                 */
                dev_err(hsdev->dev,
                        "%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
                        __func__, tag, hsdevp->dma_pending[tag], dmacr);
                sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
                                SATA_DWC_DMACR_TXRXCH_CLEAR);
        }
}

static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
{
        struct ata_queued_cmd *qc;
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
        struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
        u8 tag = 0;

        tag = ap->link.active_tag;
        qc = ata_qc_from_tag(ap, tag);
        if (!qc) {
                dev_err(ap->dev, "failed to get qc");
                return;
        }

#ifdef DEBUG_NCQ
        if (tag > 0) {
                dev_info(ap->dev,
                         "%s tag=%u cmd=0x%02x dma dir=%s proto=%s dmacr=0x%08x\n",
                         __func__, qc->tag, qc->tf.command,
                         get_dma_dir_descript(qc->dma_dir),
                         get_prot_descript(qc->tf.protocol),
                         sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
        }
#endif

        if (ata_is_dma(qc->tf.protocol)) {
                if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
                        dev_err(ap->dev,
                                "%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
                                __func__,
                                sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
                }

                hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
                sata_dwc_qc_complete(ap, qc, check_status);
                ap->link.active_tag = ATA_TAG_POISON;
        } else {
                sata_dwc_qc_complete(ap, qc, check_status);
        }
}

static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
                                u32 check_status)
{
        u8 status = 0;
        u32 mask = 0x0;
        u8 tag = qc->tag;
        struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
        hsdev->sactive_queued = 0;
        dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);

        if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
                dev_err(ap->dev, "TX DMA PENDING\n");
        else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
                dev_err(ap->dev, "RX DMA PENDING\n");
        dev_dbg(ap->dev,
                "QC complete cmd=0x%02x status=0x%02x ata%u: protocol=%d\n",
                qc->tf.command, status, ap->print_id, qc->tf.protocol);

        /* clear active bit */
        mask = (~(qcmd_tag_to_mask(tag)));
        hsdev->sactive_queued = hsdev->sactive_queued & mask;
        hsdev->sactive_issued = hsdev->sactive_issued & mask;
        ata_qc_complete(qc);
        return 0;
}

static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
{
        /* Enable selective interrupts by setting the interrupt maskregister*/
        sata_dwc_writel(&hsdev->sata_dwc_regs->intmr,
                        SATA_DWC_INTMR_ERRM |
                        SATA_DWC_INTMR_NEWFPM |
                        SATA_DWC_INTMR_PMABRTM |
                        SATA_DWC_INTMR_DMATM);
        /*
         * Unmask the error bits that should trigger an error interrupt by
         * setting the error mask register.
         */
        sata_dwc_writel(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);

        dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
                 __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->intmr),
                sata_dwc_readl(&hsdev->sata_dwc_regs->errmr));
}

static void sata_dwc_setup_port(struct ata_ioports *port, void __iomem *base)
{
        port->cmd_addr          = base + 0x00;
        port->data_addr         = base + 0x00;

        port->error_addr        = base + 0x04;
        port->feature_addr      = base + 0x04;

        port->nsect_addr        = base + 0x08;

        port->lbal_addr         = base + 0x0c;
        port->lbam_addr         = base + 0x10;
        port->lbah_addr         = base + 0x14;

        port->device_addr       = base + 0x18;
        port->command_addr      = base + 0x1c;
        port->status_addr       = base + 0x1c;

        port->altstatus_addr    = base + 0x20;
        port->ctl_addr          = base + 0x20;
}

static int sata_dwc_dma_get_channel(struct sata_dwc_device_port *hsdevp)
{
        struct sata_dwc_device *hsdev = hsdevp->hsdev;
        struct device *dev = hsdev->dev;

#ifdef CONFIG_SATA_DWC_OLD_DMA
        if (!of_find_property(dev->of_node, "dmas", NULL))
                return sata_dwc_dma_get_channel_old(hsdevp);
#endif

        hsdevp->chan = dma_request_chan(dev, "sata-dma");
        if (IS_ERR(hsdevp->chan)) {
                dev_err(dev, "failed to allocate dma channel: %ld\n",
                        PTR_ERR(hsdevp->chan));
                return PTR_ERR(hsdevp->chan);
        }

        return 0;
}

/*
 * Function : sata_dwc_port_start
 * arguments : struct ata_ioports *port
 * Return value : returns 0 if success, error code otherwise
 * This function allocates the scatter gather LLI table for AHB DMA
 */
static int sata_dwc_port_start(struct ata_port *ap)
{
        int err = 0;
        struct sata_dwc_device *hsdev;
        struct sata_dwc_device_port *hsdevp = NULL;
        struct device *pdev;
        int i;

        hsdev = HSDEV_FROM_AP(ap);

        dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no);

        hsdev->host = ap->host;
        pdev = ap->host->dev;
        if (!pdev) {
                dev_err(ap->dev, "%s: no ap->host->dev\n", __func__);
                err = -ENODEV;
                goto CLEANUP;
        }

        /* Allocate Port Struct */
        hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL);
        if (!hsdevp) {
                dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
                err = -ENOMEM;
                goto CLEANUP;
        }
        hsdevp->hsdev = hsdev;

        err = sata_dwc_dma_get_channel(hsdevp);
        if (err)
                goto CLEANUP_ALLOC;

        err = phy_power_on(hsdev->phy);
        if (err)
                goto CLEANUP_ALLOC;

        for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
                hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;

        ap->bmdma_prd = NULL;   /* set these so libata doesn't use them */
        ap->bmdma_prd_dma = 0;

        if (ap->port_no == 0)  {
                dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
                        __func__);
                sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
                                SATA_DWC_DMACR_TXRXCH_CLEAR);

                dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
                         __func__);
                sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
                                (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
                                 SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
        }

        /* Clear any error bits before libata starts issuing commands */
        clear_serror(ap);
        ap->private_data = hsdevp;
        dev_dbg(ap->dev, "%s: done\n", __func__);
        return 0;

CLEANUP_ALLOC:
        kfree(hsdevp);
CLEANUP:
        dev_dbg(ap->dev, "%s: fail. ap->id = %d\n", __func__, ap->print_id);
        return err;
}

static void sata_dwc_port_stop(struct ata_port *ap)
{
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
        struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);

        dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);

        dmaengine_terminate_sync(hsdevp->chan);
        dma_release_channel(hsdevp->chan);
        phy_power_off(hsdev->phy);

        kfree(hsdevp);
        ap->private_data = NULL;
}

/*
 * Function : sata_dwc_exec_command_by_tag
 * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued
 * Return value : None
 * This function keeps track of individual command tag ids and calls
 * ata_exec_command in libata
 */
static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
                                         struct ata_taskfile *tf,
                                         u8 tag, u32 cmd_issued)
{
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);

        dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
                ata_get_cmd_descript(tf->command), tag);

        hsdevp->cmd_issued[tag] = cmd_issued;

        /*
         * Clear SError before executing a new command.
         * sata_dwc_scr_write and read can not be used here. Clearing the PM
         * managed SError register for the disk needs to be done before the
         * task file is loaded.
         */
        clear_serror(ap);
        ata_sff_exec_command(ap, tf);
}

static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag)
{
        sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag,
                                     SATA_DWC_CMD_ISSUED_PEND);
}

static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
{
        u8 tag = qc->tag;

        if (ata_is_ncq(qc->tf.protocol)) {
                dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
                        __func__, qc->ap->link.sactive, tag);
        } else {
                tag = 0;
        }
        sata_dwc_bmdma_setup_by_tag(qc, tag);
}

static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
{
        int start_dma;
        u32 reg;
        struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
        struct ata_port *ap = qc->ap;
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
        struct dma_async_tx_descriptor *desc = hsdevp->desc[tag];
        int dir = qc->dma_dir;

        if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
                start_dma = 1;
                if (dir == DMA_TO_DEVICE)
                        hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX;
                else
                        hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
        } else {
                dev_err(ap->dev,
                        "%s: Command not pending cmd_issued=%d (tag=%d) DMA NOT started\n",
                        __func__, hsdevp->cmd_issued[tag], tag);
                start_dma = 0;
        }

        dev_dbg(ap->dev,
                "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s start_dma? %x\n",
                __func__, qc, tag, qc->tf.command,
                get_dma_dir_descript(qc->dma_dir), start_dma);
        sata_dwc_tf_dump(ap, &qc->tf);

        if (start_dma) {
                sata_dwc_scr_read(&ap->link, SCR_ERROR, &reg);
                if (reg & SATA_DWC_SERROR_ERR_BITS) {
                        dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
                                __func__, reg);
                }

                if (dir == DMA_TO_DEVICE)
                        sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
                                        SATA_DWC_DMACR_TXCHEN);
                else
                        sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
                                        SATA_DWC_DMACR_RXCHEN);

                /* Enable AHB DMA transfer on the specified channel */
                dmaengine_submit(desc);
                dma_async_issue_pending(hsdevp->chan);
        }
}

static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
{
        u8 tag = qc->tag;

        if (ata_is_ncq(qc->tf.protocol)) {
                dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
                        __func__, qc->ap->link.sactive, tag);
        } else {
                tag = 0;
        }
        dev_dbg(qc->ap->dev, "%s\n", __func__);
        sata_dwc_bmdma_start_by_tag(qc, tag);
}

static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
{
        u32 sactive;
        u8 tag = qc->tag;
        struct ata_port *ap = qc->ap;
        struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);

#ifdef DEBUG_NCQ
        if (qc->tag > 0 || ap->link.sactive > 1)
                dev_info(ap->dev,
                         "%s ap id=%d cmd(0x%02x)=%s qc tag=%d prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
                         __func__, ap->print_id, qc->tf.command,
                         ata_get_cmd_descript(qc->tf.command),
                         qc->tag, get_prot_descript(qc->tf.protocol),
                         ap->link.active_tag, ap->link.sactive);
#endif

        if (!ata_is_ncq(qc->tf.protocol))
                tag = 0;

        if (ata_is_dma(qc->tf.protocol)) {
                hsdevp->desc[tag] = dma_dwc_xfer_setup(qc);
                if (!hsdevp->desc[tag])
                        return AC_ERR_SYSTEM;
        } else {
                hsdevp->desc[tag] = NULL;
        }

        if (ata_is_ncq(qc->tf.protocol)) {
                sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
                sactive |= (0x00000001 << tag);
                sata_dwc_scr_write(&ap->link, SCR_ACTIVE, sactive);

                dev_dbg(qc->ap->dev,
                        "%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
                        __func__, tag, qc->ap->link.sactive, sactive);

                ap->ops->sff_tf_load(ap, &qc->tf);
                sata_dwc_exec_command_by_tag(ap, &qc->tf, tag,
                                             SATA_DWC_CMD_ISSUED_PEND);
        } else {
                return ata_bmdma_qc_issue(qc);
        }
        return 0;
}

static void sata_dwc_error_handler(struct ata_port *ap)
{
        ata_sff_error_handler(ap);
}

static int sata_dwc_hardreset(struct ata_link *link, unsigned int *class,
                              unsigned long deadline)
{
        struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap);
        int ret;

        ret = sata_sff_hardreset(link, class, deadline);

        sata_dwc_enable_interrupts(hsdev);

        /* Reconfigure the DMA control register */
        sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
                        SATA_DWC_DMACR_TXRXCH_CLEAR);

        /* Reconfigure the DMA Burst Transaction Size register */
        sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
                        SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
                        SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));

        return ret;
}

static void sata_dwc_dev_select(struct ata_port *ap, unsigned int device)
{
        /* SATA DWC is master only */
}

/*
 * scsi mid-layer and libata interface structures
 */
static struct scsi_host_template sata_dwc_sht = {
        ATA_NCQ_SHT(DRV_NAME),
        /*
         * test-only: Currently this driver doesn't handle NCQ
         * correctly. We enable NCQ but set the queue depth to a
         * max of 1. This will get fixed in in a future release.
         */
        .sg_tablesize           = LIBATA_MAX_PRD,
        /* .can_queue           = ATA_MAX_QUEUE, */
        /*
         * Make sure a LLI block is not created that will span 8K max FIS
         * boundary. If the block spans such a FIS boundary, there is a chance
         * that a DMA burst will cross that boundary -- this results in an
         * error in the host controller.
         */
        .dma_boundary           = 0x1fff /* ATA_DMA_BOUNDARY */,
};

static struct ata_port_operations sata_dwc_ops = {
        .inherits               = &ata_sff_port_ops,

        .error_handler          = sata_dwc_error_handler,
        .hardreset              = sata_dwc_hardreset,

        .qc_issue               = sata_dwc_qc_issue,

        .scr_read               = sata_dwc_scr_read,
        .scr_write              = sata_dwc_scr_write,

        .port_start             = sata_dwc_port_start,
        .port_stop              = sata_dwc_port_stop,

        .sff_dev_select         = sata_dwc_dev_select,

        .bmdma_setup            = sata_dwc_bmdma_setup,
        .bmdma_start            = sata_dwc_bmdma_start,
};

static const struct ata_port_info sata_dwc_port_info[] = {
        {
                .flags          = ATA_FLAG_SATA | ATA_FLAG_NCQ,
                .pio_mask       = ATA_PIO4,
                .udma_mask      = ATA_UDMA6,
                .port_ops       = &sata_dwc_ops,
        },
};

static int sata_dwc_probe(struct platform_device *ofdev)
{
        struct sata_dwc_device *hsdev;
        u32 idr, versionr;
        char *ver = (char *)&versionr;
        void __iomem *base;
        int err = 0;
        int irq;
        struct ata_host *host;
        struct ata_port_info pi = sata_dwc_port_info[0];
        const struct ata_port_info *ppi[] = { &pi, NULL };
        struct device_node *np = ofdev->dev.of_node;
        struct resource *res;

        /* Allocate DWC SATA device */
        host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
        hsdev = devm_kzalloc(&ofdev->dev, sizeof(*hsdev), GFP_KERNEL);
        if (!host || !hsdev)
                return -ENOMEM;

        host->private_data = hsdev;

        /* Ioremap SATA registers */
        res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
        base = devm_ioremap_resource(&ofdev->dev, res);
        if (IS_ERR(base))
                return PTR_ERR(base);
        dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");

        /* Synopsys DWC SATA specific Registers */
        hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
        hsdev->dmadr = res->start + SATA_DWC_REG_OFFSET + offsetof(struct sata_dwc_regs, dmadr);

        /* Setup port */
        host->ports[0]->ioaddr.cmd_addr = base;
        host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
        sata_dwc_setup_port(&host->ports[0]->ioaddr, base);

        /* Read the ID and Version Registers */
        idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
        versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
        dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
                   idr, ver[0], ver[1], ver[2]);

        /* Save dev for later use in dev_xxx() routines */
        hsdev->dev = &ofdev->dev;

        /* Enable SATA Interrupts */
        sata_dwc_enable_interrupts(hsdev);

        /* Get SATA interrupt number */
        irq = irq_of_parse_and_map(np, 0);
        if (irq == NO_IRQ) {
                dev_err(&ofdev->dev, "no SATA DMA irq\n");
                err = -ENODEV;
                goto error_out;
        }

#ifdef CONFIG_SATA_DWC_OLD_DMA
        if (!of_find_property(np, "dmas", NULL)) {
                err = sata_dwc_dma_init_old(ofdev, hsdev);
                if (err)
                        goto error_out;
        }
#endif

        hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
        if (IS_ERR(hsdev->phy)) {
                err = PTR_ERR(hsdev->phy);
                hsdev->phy = NULL;
                goto error_out;
        }

        err = phy_init(hsdev->phy);
        if (err)
                goto error_out;

        /*
         * Now, register with libATA core, this will also initiate the
         * device discovery process, invoking our port_start() handler &
         * error_handler() to execute a dummy Softreset EH session
         */
        err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
        if (err)
                dev_err(&ofdev->dev, "failed to activate host");

        return 0;

error_out:
        phy_exit(hsdev->phy);
        return err;
}

static int sata_dwc_remove(struct platform_device *ofdev)
{
        struct device *dev = &ofdev->dev;
        struct ata_host *host = dev_get_drvdata(dev);
        struct sata_dwc_device *hsdev = host->private_data;

        ata_host_detach(host);

        phy_exit(hsdev->phy);

#ifdef CONFIG_SATA_DWC_OLD_DMA
        /* Free SATA DMA resources */
        sata_dwc_dma_exit_old(hsdev);
#endif

        dev_dbg(&ofdev->dev, "done\n");
        return 0;
}

static const struct of_device_id sata_dwc_match[] = {
        { .compatible = "amcc,sata-460ex", },
        {}
};
MODULE_DEVICE_TABLE(of, sata_dwc_match);

static struct platform_driver sata_dwc_driver = {
        .driver = {
                .name = DRV_NAME,
                .of_match_table = sata_dwc_match,
        },
        .probe = sata_dwc_probe,
        .remove = sata_dwc_remove,
};

module_platform_driver(sata_dwc_driver);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
MODULE_DESCRIPTION("DesignWare Cores SATA controller low level driver");
MODULE_VERSION(DRV_VERSION);