]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/scsi/arm/fas216.c
projects / mirror_ubuntu-bionic-kernel.git / blob
? search:


7304d5a4fc4f411b1ca79048f5b5386ed63e5322
[mirror_ubuntu-bionic-kernel.git] / drivers / scsi / arm / fas216.c
1 /*
2 * linux/drivers/acorn/scsi/fas216.c
3 *
4 * Copyright (C) 1997-2003 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * Based on information in qlogicfas.c by Tom Zerucha, Michael Griffith, and
11 * other sources, including:
12 * the AMD Am53CF94 data sheet
13 * the AMD Am53C94 data sheet
14 *
15 * This is a generic driver. To use it, have a look at cumana_2.c. You
16 * should define your own structure that overlays FAS216_Info, eg:
17 * struct my_host_data {
18 * FAS216_Info info;
19 * ... my host specific data ...
20 * };
21 *
22 * Changelog:
23 * 30-08-1997 RMK Created
24 * 14-09-1997 RMK Started disconnect support
25 * 08-02-1998 RMK Corrected real DMA support
26 * 15-02-1998 RMK Started sync xfer support
27 * 06-04-1998 RMK Tightened conditions for printing incomplete
28 * transfers
29 * 02-05-1998 RMK Added extra checks in fas216_reset
30 * 24-05-1998 RMK Fixed synchronous transfers with period >= 200ns
31 * 27-06-1998 RMK Changed asm/delay.h to linux/delay.h
32 * 26-08-1998 RMK Improved message support wrt MESSAGE_REJECT
33 * 02-04-2000 RMK Converted to use the new error handling, and
34 * automatically request sense data upon check
35 * condition status from targets.
36 */
37 #include <linux/module.h>
38 #include <linux/blkdev.h>
39 #include <linux/kernel.h>
40 #include <linux/string.h>
41 #include <linux/ioport.h>
42 #include <linux/proc_fs.h>
43 #include <linux/delay.h>
44 #include <linux/bitops.h>
45 #include <linux/init.h>
46 #include <linux/interrupt.h>
47
48 #include <asm/dma.h>
49 #include <asm/io.h>
50 #include <asm/irq.h>
51 #include <asm/ecard.h>
52
53 #include "../scsi.h"
54 #include <scsi/scsi_dbg.h>
55 #include <scsi/scsi_host.h>
56 #include "fas216.h"
57 #include "scsi.h"
58
59 /* NOTE: SCSI2 Synchronous transfers *require* DMA according to
60 * the data sheet. This restriction is crazy, especially when
61 * you only want to send 16 bytes! What were the guys who
62 * designed this chip on at that time? Did they read the SCSI2
63 * spec at all? The following sections are taken from the SCSI2
64 * standard (s2r10) concerning this:
65 *
66 * > IMPLEMENTORS NOTES:
67 * > (1) Re-negotiation at every selection is not recommended, since a
68 * > significant performance impact is likely.
69 *
70 * > The implied synchronous agreement shall remain in effect until a BUS DEVICE
71 * > RESET message is received, until a hard reset condition occurs, or until one
72 * > of the two SCSI devices elects to modify the agreement. The default data
73 * > transfer mode is asynchronous data transfer mode. The default data transfer
74 * > mode is entered at power on, after a BUS DEVICE RESET message, or after a hard
75 * > reset condition.
76 *
77 * In total, this means that once you have elected to use synchronous
78 * transfers, you must always use DMA.
79 *
80 * I was thinking that this was a good chip until I found this restriction ;(
81 */
82 #define SCSI2_SYNC
83 #undef SCSI2_TAG
84
85 #undef DEBUG_CONNECT
86 #undef DEBUG_MESSAGES
87
88 #undef CHECK_STRUCTURE
89
90 #define LOG_CONNECT (1 << 0)
91 #define LOG_BUSSERVICE (1 << 1)
92 #define LOG_FUNCTIONDONE (1 << 2)
93 #define LOG_MESSAGES (1 << 3)
94 #define LOG_BUFFER (1 << 4)
95 #define LOG_ERROR (1 << 8)
96
97 static int level_mask = LOG_ERROR;
98
99 module_param(level_mask, int, 0644);
100
101 #ifndef MODULE
102 static int __init fas216_log_setup(char *str)
103 {
104 char *s;
105
106 level_mask = 0;
107
108 while ((s = strsep(&str, ",")) != NULL) {
109 switch (s[0]) {
110 case 'a':
111 if (strcmp(s, "all") == 0)
112 level_mask |= -1;
113 break;
114 case 'b':
115 if (strncmp(s, "bus", 3) == 0)
116 level_mask |= LOG_BUSSERVICE;
117 if (strncmp(s, "buf", 3) == 0)
118 level_mask |= LOG_BUFFER;
119 break;
120 case 'c':
121 level_mask |= LOG_CONNECT;
122 break;
123 case 'e':
124 level_mask |= LOG_ERROR;
125 break;
126 case 'm':
127 level_mask |= LOG_MESSAGES;
128 break;
129 case 'n':
130 if (strcmp(s, "none") == 0)
131 level_mask = 0;
132 break;
133 case 's':
134 level_mask |= LOG_FUNCTIONDONE;
135 break;
136 }
137 }
138 return 1;
139 }
140
141 __setup("fas216_logging=", fas216_log_setup);
142 #endif
143
144 static inline unsigned char fas216_readb(FAS216_Info *info, unsigned int reg)
145 {
146 unsigned int off = reg << info->scsi.io_shift;
147 return readb(info->scsi.io_base + off);
148 }
149
150 static inline void fas216_writeb(FAS216_Info *info, unsigned int reg, unsigned int val)
151 {
152 unsigned int off = reg << info->scsi.io_shift;
153 writeb(val, info->scsi.io_base + off);
154 }
155
156 static void fas216_dumpstate(FAS216_Info *info)
157 {
158 unsigned char is, stat, inst;
159
160 is = fas216_readb(info, REG_IS);
161 stat = fas216_readb(info, REG_STAT);
162 inst = fas216_readb(info, REG_INST);
163
164 printk("FAS216: CTCL=%02X CTCM=%02X CMD=%02X STAT=%02X"
165 " INST=%02X IS=%02X CFIS=%02X",
166 fas216_readb(info, REG_CTCL),
167 fas216_readb(info, REG_CTCM),
168 fas216_readb(info, REG_CMD), stat, inst, is,
169 fas216_readb(info, REG_CFIS));
170 printk(" CNTL1=%02X CNTL2=%02X CNTL3=%02X CTCH=%02X\n",
171 fas216_readb(info, REG_CNTL1),
172 fas216_readb(info, REG_CNTL2),
173 fas216_readb(info, REG_CNTL3),
174 fas216_readb(info, REG_CTCH));
175 }
176
177 static void print_SCp(struct scsi_pointer *SCp, const char *prefix, const char *suffix)
178 {
179 printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s",
180 prefix, SCp->ptr, SCp->this_residual, SCp->buffer,
181 SCp->buffers_residual, suffix);
182 }
183
184 #ifdef CHECK_STRUCTURE
185 static void fas216_dumpinfo(FAS216_Info *info)
186 {
187 static int used = 0;
188 int i;
189
190 if (used++)
191 return;
192
193 printk("FAS216_Info=\n");
194 printk(" { magic_start=%lX host=%p SCpnt=%p origSCpnt=%p\n",
195 info->magic_start, info->host, info->SCpnt,
196 info->origSCpnt);
197 printk(" scsi={ io_shift=%X irq=%X cfg={ %X %X %X %X }\n",
198 info->scsi.io_shift, info->scsi.irq,
199 info->scsi.cfg[0], info->scsi.cfg[1], info->scsi.cfg[2],
200 info->scsi.cfg[3]);
201 printk(" type=%p phase=%X\n",
202 info->scsi.type, info->scsi.phase);
203 print_SCp(&info->scsi.SCp, " SCp={ ", " }\n");
204 printk(" msgs async_stp=%X disconnectable=%d aborting=%d }\n",
205 info->scsi.async_stp,
206 info->scsi.disconnectable, info->scsi.aborting);
207 printk(" stats={ queues=%X removes=%X fins=%X reads=%X writes=%X miscs=%X\n"
208 " disconnects=%X aborts=%X bus_resets=%X host_resets=%X}\n",
209 info->stats.queues, info->stats.removes, info->stats.fins,
210 info->stats.reads, info->stats.writes, info->stats.miscs,
211 info->stats.disconnects, info->stats.aborts, info->stats.bus_resets,
212 info->stats.host_resets);
213 printk(" ifcfg={ clockrate=%X select_timeout=%X asyncperiod=%X sync_max_depth=%X }\n",
214 info->ifcfg.clockrate, info->ifcfg.select_timeout,
215 info->ifcfg.asyncperiod, info->ifcfg.sync_max_depth);
216 for (i = 0; i < 8; i++) {
217 printk(" busyluns[%d]=%08lx dev[%d]={ disconnect_ok=%d stp=%X sof=%X sync_state=%X }\n",
218 i, info->busyluns[i], i,
219 info->device[i].disconnect_ok, info->device[i].stp,
220 info->device[i].sof, info->device[i].sync_state);
221 }
222 printk(" dma={ transfer_type=%X setup=%p pseudo=%p stop=%p }\n",
223 info->dma.transfer_type, info->dma.setup,
224 info->dma.pseudo, info->dma.stop);
225 printk(" internal_done=%X magic_end=%lX }\n",
226 info->internal_done, info->magic_end);
227 }
228
229 static void __fas216_checkmagic(FAS216_Info *info, const char *func)
230 {
231 int corruption = 0;
232 if (info->magic_start != MAGIC) {
233 printk(KERN_CRIT "FAS216 Error: magic at start corrupted\n");
234 corruption++;
235 }
236 if (info->magic_end != MAGIC) {
237 printk(KERN_CRIT "FAS216 Error: magic at end corrupted\n");
238 corruption++;
239 }
240 if (corruption) {
241 fas216_dumpinfo(info);
242 panic("scsi memory space corrupted in %s", func);
243 }
244 }
245 #define fas216_checkmagic(info) __fas216_checkmagic((info), __func__)
246 #else
247 #define fas216_checkmagic(info)
248 #endif
249
250 static const char *fas216_bus_phase(int stat)
251 {
252 static const char *phases[] = {
253 "DATA OUT", "DATA IN",
254 "COMMAND", "STATUS",
255 "MISC OUT", "MISC IN",
256 "MESG OUT", "MESG IN"
257 };
258
259 return phases[stat & STAT_BUSMASK];
260 }
261
262 static const char *fas216_drv_phase(FAS216_Info *info)
263 {
264 static const char *phases[] = {
265 [PHASE_IDLE] = "idle",
266 [PHASE_SELECTION] = "selection",
267 [PHASE_COMMAND] = "command",
268 [PHASE_DATAOUT] = "data out",
269 [PHASE_DATAIN] = "data in",
270 [PHASE_MSGIN] = "message in",
271 [PHASE_MSGIN_DISCONNECT]= "disconnect",
272 [PHASE_MSGOUT_EXPECT] = "expect message out",
273 [PHASE_MSGOUT] = "message out",
274 [PHASE_STATUS] = "status",
275 [PHASE_DONE] = "done",
276 };
277
278 if (info->scsi.phase < ARRAY_SIZE(phases) &&
279 phases[info->scsi.phase])
280 return phases[info->scsi.phase];
281 return "???";
282 }
283
284 static char fas216_target(FAS216_Info *info)
285 {
286 if (info->SCpnt)
287 return '0' + info->SCpnt->device->id;
288 else
289 return 'H';
290 }
291
292 static void
293 fas216_do_log(FAS216_Info *info, char target, char *fmt, va_list ap)
294 {
295 static char buf[1024];
296
297 vsnprintf(buf, sizeof(buf), fmt, ap);
298 printk("scsi%d.%c: %s", info->host->host_no, target, buf);
299 }
300
301 static void fas216_log_command(FAS216_Info *info, int level,
302 struct scsi_cmnd *SCpnt, char *fmt, ...)
303 {
304 va_list args;
305
306 if (level != 0 && !(level & level_mask))
307 return;
308
309 va_start(args, fmt);
310 fas216_do_log(info, '0' + SCpnt->device->id, fmt, args);
311 va_end(args);
312
313 scsi_print_command(SCpnt);
314 }
315
316 static void
317 fas216_log_target(FAS216_Info *info, int level, int target, char *fmt, ...)
318 {
319 va_list args;
320
321 if (level != 0 && !(level & level_mask))
322 return;
323
324 if (target < 0)
325 target = 'H';
326 else
327 target += '0';
328
329 va_start(args, fmt);
330 fas216_do_log(info, target, fmt, args);
331 va_end(args);
332
333 printk("\n");
334 }
335
336 static void fas216_log(FAS216_Info *info, int level, char *fmt, ...)
337 {
338 va_list args;
339
340 if (level != 0 && !(level & level_mask))
341 return;
342
343 va_start(args, fmt);
344 fas216_do_log(info, fas216_target(info), fmt, args);
345 va_end(args);
346
347 printk("\n");
348 }
349
350 #define PH_SIZE 32
351
352 static struct { int stat, ssr, isr, ph; } ph_list[PH_SIZE];
353 static int ph_ptr;
354
355 static void add_debug_list(int stat, int ssr, int isr, int ph)
356 {
357 ph_list[ph_ptr].stat = stat;
358 ph_list[ph_ptr].ssr = ssr;
359 ph_list[ph_ptr].isr = isr;
360 ph_list[ph_ptr].ph = ph;
361
362 ph_ptr = (ph_ptr + 1) & (PH_SIZE-1);
363 }
364
365 static struct { int command; void *from; } cmd_list[8];
366 static int cmd_ptr;
367
368 static void fas216_cmd(FAS216_Info *info, unsigned int command)
369 {
370 cmd_list[cmd_ptr].command = command;
371 cmd_list[cmd_ptr].from = __builtin_return_address(0);
372
373 cmd_ptr = (cmd_ptr + 1) & 7;
374
375 fas216_writeb(info, REG_CMD, command);
376 }
377
378 static void print_debug_list(void)
379 {
380 int i;
381
382 i = ph_ptr;
383
384 printk(KERN_ERR "SCSI IRQ trail\n");
385 do {
386 printk(" %02x:%02x:%02x:%1x",
387 ph_list[i].stat, ph_list[i].ssr,
388 ph_list[i].isr, ph_list[i].ph);
389 i = (i + 1) & (PH_SIZE - 1);
390 if (((i ^ ph_ptr) & 7) == 0)
391 printk("\n");
392 } while (i != ph_ptr);
393 if ((i ^ ph_ptr) & 7)
394 printk("\n");
395
396 i = cmd_ptr;
397 printk(KERN_ERR "FAS216 commands: ");
398 do {
399 printk("%02x:%p ", cmd_list[i].command, cmd_list[i].from);
400 i = (i + 1) & 7;
401 } while (i != cmd_ptr);
402 printk("\n");
403 }
404
405 static void fas216_done(FAS216_Info *info, unsigned int result);
406
407 /**
408 * fas216_get_last_msg - retrive last message from the list
409 * @info: interface to search
410 * @pos: current fifo position
411 *
412 * Retrieve a last message from the list, using position in fifo.
413 */
414 static inline unsigned short
415 fas216_get_last_msg(FAS216_Info *info, int pos)
416 {
417 unsigned short packed_msg = NOP;
418 struct message *msg;
419 int msgnr = 0;
420
421 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
422 if (pos >= msg->fifo)
423 break;
424 }
425
426 if (msg) {
427 if (msg->msg[0] == EXTENDED_MESSAGE)
428 packed_msg = EXTENDED_MESSAGE | msg->msg[2] << 8;
429 else
430 packed_msg = msg->msg[0];
431 }
432
433 fas216_log(info, LOG_MESSAGES,
434 "Message: %04x found at position %02x\n", packed_msg, pos);
435
436 return packed_msg;
437 }
438
439 /**
440 * fas216_syncperiod - calculate STP register value
441 * @info: state structure for interface connected to device
442 * @ns: period in ns (between subsequent bytes)
443 *
444 * Calculate value to be loaded into the STP register for a given period
445 * in ns. Returns a value suitable for REG_STP.
446 */
447 static int fas216_syncperiod(FAS216_Info *info, int ns)
448 {
449 int value = (info->ifcfg.clockrate * ns) / 1000;
450
451 fas216_checkmagic(info);
452
453 if (value < 4)
454 value = 4;
455 else if (value > 35)
456 value = 35;
457
458 return value & 31;
459 }
460
461 /**
462 * fas216_set_sync - setup FAS216 chip for specified transfer period.
463 * @info: state structure for interface connected to device
464 * @target: target
465 *
466 * Correctly setup FAS216 chip for specified transfer period.
467 * Notes : we need to switch the chip out of FASTSCSI mode if we have
468 * a transfer period >= 200ns - otherwise the chip will violate
469 * the SCSI timings.
470 */
471 static void fas216_set_sync(FAS216_Info *info, int target)
472 {
473 unsigned int cntl3;
474
475 fas216_writeb(info, REG_SOF, info->device[target].sof);
476 fas216_writeb(info, REG_STP, info->device[target].stp);
477
478 cntl3 = info->scsi.cfg[2];
479 if (info->device[target].period >= (200 / 4))
480 cntl3 = cntl3 & ~CNTL3_FASTSCSI;
481
482 fas216_writeb(info, REG_CNTL3, cntl3);
483 }
484
485 /* Synchronous transfer support
486 *
487 * Note: The SCSI II r10 spec says (5.6.12):
488 *
489 * (2) Due to historical problems with early host adapters that could
490 * not accept an SDTR message, some targets may not initiate synchronous
491 * negotiation after a power cycle as required by this standard. Host
492 * adapters that support synchronous mode may avoid the ensuing failure
493 * modes when the target is independently power cycled by initiating a
494 * synchronous negotiation on each REQUEST SENSE and INQUIRY command.
495 * This approach increases the SCSI bus overhead and is not recommended
496 * for new implementations. The correct method is to respond to an
497 * SDTR message with a MESSAGE REJECT message if the either the
498 * initiator or target devices does not support synchronous transfers
499 * or does not want to negotiate for synchronous transfers at the time.
500 * Using the correct method assures compatibility with wide data
501 * transfers and future enhancements.
502 *
503 * We will always initiate a synchronous transfer negotiation request on
504 * every INQUIRY or REQUEST SENSE message, unless the target itself has
505 * at some point performed a synchronous transfer negotiation request, or
506 * we have synchronous transfers disabled for this device.
507 */
508
509 /**
510 * fas216_handlesync - Handle a synchronous transfer message
511 * @info: state structure for interface
512 * @msg: message from target
513 *
514 * Handle a synchronous transfer message from the target
515 */
516 static void fas216_handlesync(FAS216_Info *info, char *msg)
517 {
518 struct fas216_device *dev = &info->device[info->SCpnt->device->id];
519 enum { sync, async, none, reject } res = none;
520
521 #ifdef SCSI2_SYNC
522 switch (msg[0]) {
523 case MESSAGE_REJECT:
524 /* Synchronous transfer request failed.
525 * Note: SCSI II r10:
526 *
527 * SCSI devices that are capable of synchronous
528 * data transfers shall not respond to an SDTR
529 * message with a MESSAGE REJECT message.
530 *
531 * Hence, if we get this condition, we disable
532 * negotiation for this device.
533 */
534 if (dev->sync_state == neg_inprogress) {
535 dev->sync_state = neg_invalid;
536 res = async;
537 }
538 break;
539
540 case EXTENDED_MESSAGE:
541 switch (dev->sync_state) {
542 /* We don't accept synchronous transfer requests.
543 * Respond with a MESSAGE_REJECT to prevent a
544 * synchronous transfer agreement from being reached.
545 */
546 case neg_invalid:
547 res = reject;
548 break;
549
550 /* We were not negotiating a synchronous transfer,
551 * but the device sent us a negotiation request.
552 * Honour the request by sending back a SDTR
553 * message containing our capability, limited by
554 * the targets capability.
555 */
556 default:
557 fas216_cmd(info, CMD_SETATN);
558 if (msg[4] > info->ifcfg.sync_max_depth)
559 msg[4] = info->ifcfg.sync_max_depth;
560 if (msg[3] < 1000 / info->ifcfg.clockrate)
561 msg[3] = 1000 / info->ifcfg.clockrate;
562
563 msgqueue_flush(&info->scsi.msgs);
564 msgqueue_addmsg(&info->scsi.msgs, 5,
565 EXTENDED_MESSAGE, 3, EXTENDED_SDTR,
566 msg[3], msg[4]);
567 info->scsi.phase = PHASE_MSGOUT_EXPECT;
568
569 /* This is wrong. The agreement is not in effect
570 * until this message is accepted by the device
571 */
572 dev->sync_state = neg_targcomplete;
573 res = sync;
574 break;
575
576 /* We initiated the synchronous transfer negotiation,
577 * and have successfully received a response from the
578 * target. The synchronous transfer agreement has been
579 * reached. Note: if the values returned are out of our
580 * bounds, we must reject the message.
581 */
582 case neg_inprogress:
583 res = reject;
584 if (msg[4] <= info->ifcfg.sync_max_depth &&
585 msg[3] >= 1000 / info->ifcfg.clockrate) {
586 dev->sync_state = neg_complete;
587 res = sync;
588 }
589 break;
590 }
591 }
592 #else
593 res = reject;
594 #endif
595
596 switch (res) {
597 case sync:
598 dev->period = msg[3];
599 dev->sof = msg[4];
600 dev->stp = fas216_syncperiod(info, msg[3] * 4);
601 fas216_set_sync(info, info->SCpnt->device->id);
602 break;
603
604 case reject:
605 fas216_cmd(info, CMD_SETATN);
606 msgqueue_flush(&info->scsi.msgs);
607 msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
608 info->scsi.phase = PHASE_MSGOUT_EXPECT;
609
610 case async:
611 dev->period = info->ifcfg.asyncperiod / 4;
612 dev->sof = 0;
613 dev->stp = info->scsi.async_stp;
614 fas216_set_sync(info, info->SCpnt->device->id);
615 break;
616
617 case none:
618 break;
619 }
620 }
621
622 /**
623 * fas216_updateptrs - update data pointers after transfer suspended/paused
624 * @info: interface's local pointer to update
625 * @bytes_transferred: number of bytes transferred
626 *
627 * Update data pointers after transfer suspended/paused
628 */
629 static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
630 {
631 struct scsi_pointer *SCp = &info->scsi.SCp;
632
633 fas216_checkmagic(info);
634
635 BUG_ON(bytes_transferred < 0);
636
637 SCp->phase -= bytes_transferred;
638
639 while (bytes_transferred != 0) {
640 if (SCp->this_residual > bytes_transferred)
641 break;
642 /*
643 * We have used up this buffer. Move on to the
644 * next buffer.
645 */
646 bytes_transferred -= SCp->this_residual;
647 if (!next_SCp(SCp) && bytes_transferred) {
648 printk(KERN_WARNING "scsi%d.%c: out of buffers\n",
649 info->host->host_no, '0' + info->SCpnt->device->id);
650 return;
651 }
652 }
653
654 SCp->this_residual -= bytes_transferred;
655 if (SCp->this_residual)
656 SCp->ptr += bytes_transferred;
657 else
658 SCp->ptr = NULL;
659 }
660
661 /**
662 * fas216_pio - transfer data off of/on to card using programmed IO
663 * @info: interface to transfer data to/from
664 * @direction: direction to transfer data (DMA_OUT/DMA_IN)
665 *
666 * Transfer data off of/on to card using programmed IO.
667 * Notes: this is incredibly slow.
668 */
669 static void fas216_pio(FAS216_Info *info, fasdmadir_t direction)
670 {
671 struct scsi_pointer *SCp = &info->scsi.SCp;
672
673 fas216_checkmagic(info);
674
675 if (direction == DMA_OUT)
676 fas216_writeb(info, REG_FF, get_next_SCp_byte(SCp));
677 else
678 put_next_SCp_byte(SCp, fas216_readb(info, REG_FF));
679
680 if (SCp->this_residual == 0)
681 next_SCp(SCp);
682 }
683
684 static void fas216_set_stc(FAS216_Info *info, unsigned int length)
685 {
686 fas216_writeb(info, REG_STCL, length);
687 fas216_writeb(info, REG_STCM, length >> 8);
688 fas216_writeb(info, REG_STCH, length >> 16);
689 }
690
691 static unsigned int fas216_get_ctc(FAS216_Info *info)
692 {
693 return fas216_readb(info, REG_CTCL) +
694 (fas216_readb(info, REG_CTCM) << 8) +
695 (fas216_readb(info, REG_CTCH) << 16);
696 }
697
698 /**
699 * fas216_cleanuptransfer - clean up after a transfer has completed.
700 * @info: interface to clean up
701 *
702 * Update the data pointers according to the number of bytes transferred
703 * on the SCSI bus.
704 */
705 static void fas216_cleanuptransfer(FAS216_Info *info)
706 {
707 unsigned long total, residual, fifo;
708 fasdmatype_t dmatype = info->dma.transfer_type;
709
710 info->dma.transfer_type = fasdma_none;
711
712 /*
713 * PIO transfers do not need to be cleaned up.
714 */
715 if (dmatype == fasdma_pio || dmatype == fasdma_none)
716 return;
717
718 if (dmatype == fasdma_real_all)
719 total = info->scsi.SCp.phase;
720 else
721 total = info->scsi.SCp.this_residual;
722
723 residual = fas216_get_ctc(info);
724
725 fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
726
727 fas216_log(info, LOG_BUFFER, "cleaning up from previous "
728 "transfer: length 0x%06x, residual 0x%x, fifo %d",
729 total, residual, fifo);
730
731 /*
732 * If we were performing Data-Out, the transfer counter
733 * counts down each time a byte is transferred by the
734 * host to the FIFO. This means we must include the
735 * bytes left in the FIFO from the transfer counter.
736 */
737 if (info->scsi.phase == PHASE_DATAOUT)
738 residual += fifo;
739
740 fas216_updateptrs(info, total - residual);
741 }
742
743 /**
744 * fas216_transfer - Perform a DMA/PIO transfer off of/on to card
745 * @info: interface from which device disconnected from
746 *
747 * Start a DMA/PIO transfer off of/on to card
748 */
749 static void fas216_transfer(FAS216_Info *info)
750 {
751 fasdmadir_t direction;
752 fasdmatype_t dmatype;
753
754 fas216_log(info, LOG_BUFFER,
755 "starttransfer: buffer %p length 0x%06x reqlen 0x%06x",
756 info->scsi.SCp.ptr, info->scsi.SCp.this_residual,
757 info->scsi.SCp.phase);
758
759 if (!info->scsi.SCp.ptr) {
760 fas216_log(info, LOG_ERROR, "null buffer passed to "
761 "fas216_starttransfer");
762 print_SCp(&info->scsi.SCp, "SCp: ", "\n");
763 print_SCp(&info->SCpnt->SCp, "Cmnd SCp: ", "\n");
764 return;
765 }
766
767 /*
768 * If we have a synchronous transfer agreement in effect, we must
769 * use DMA mode. If we are using asynchronous transfers, we may
770 * use DMA mode or PIO mode.
771 */
772 if (info->device[info->SCpnt->device->id].sof)
773 dmatype = fasdma_real_all;
774 else
775 dmatype = fasdma_pio;
776
777 if (info->scsi.phase == PHASE_DATAOUT)
778 direction = DMA_OUT;
779 else
780 direction = DMA_IN;
781
782 if (info->dma.setup)
783 dmatype = info->dma.setup(info->host, &info->scsi.SCp,
784 direction, dmatype);
785 info->dma.transfer_type = dmatype;
786
787 if (dmatype == fasdma_real_all)
788 fas216_set_stc(info, info->scsi.SCp.phase);
789 else
790 fas216_set_stc(info, info->scsi.SCp.this_residual);
791
792 switch (dmatype) {
793 case fasdma_pio:
794 fas216_log(info, LOG_BUFFER, "PIO transfer");
795 fas216_writeb(info, REG_SOF, 0);
796 fas216_writeb(info, REG_STP, info->scsi.async_stp);
797 fas216_cmd(info, CMD_TRANSFERINFO);
798 fas216_pio(info, direction);
799 break;
800
801 case fasdma_pseudo:
802 fas216_log(info, LOG_BUFFER, "pseudo transfer");
803 fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
804 info->dma.pseudo(info->host, &info->scsi.SCp,
805 direction, info->SCpnt->transfersize);
806 break;
807
808 case fasdma_real_block:
809 fas216_log(info, LOG_BUFFER, "block dma transfer");
810 fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
811 break;
812
813 case fasdma_real_all:
814 fas216_log(info, LOG_BUFFER, "total dma transfer");
815 fas216_cmd(info, CMD_TRANSFERINFO | CMD_WITHDMA);
816 break;
817
818 default:
819 fas216_log(info, LOG_BUFFER | LOG_ERROR,
820 "invalid FAS216 DMA type");
821 break;
822 }
823 }
824
825 /**
826 * fas216_stoptransfer - Stop a DMA transfer onto / off of the card
827 * @info: interface from which device disconnected from
828 *
829 * Called when we switch away from DATA IN or DATA OUT phases.
830 */
831 static void fas216_stoptransfer(FAS216_Info *info)
832 {
833 fas216_checkmagic(info);
834
835 if (info->dma.transfer_type == fasdma_real_all ||
836 info->dma.transfer_type == fasdma_real_block)
837 info->dma.stop(info->host, &info->scsi.SCp);
838
839 fas216_cleanuptransfer(info);
840
841 if (info->scsi.phase == PHASE_DATAIN) {
842 unsigned int fifo;
843
844 /*
845 * If we were performing Data-In, then the FIFO counter
846 * contains the number of bytes not transferred via DMA
847 * from the on-board FIFO. Read them manually.
848 */
849 fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
850 while (fifo && info->scsi.SCp.ptr) {
851 *info->scsi.SCp.ptr = fas216_readb(info, REG_FF);
852 fas216_updateptrs(info, 1);
853 fifo--;
854 }
855 } else {
856 /*
857 * After a Data-Out phase, there may be unsent
858 * bytes left in the FIFO. Flush them out.
859 */
860 fas216_cmd(info, CMD_FLUSHFIFO);
861 }
862 }
863
864 static void fas216_aborttransfer(FAS216_Info *info)
865 {
866 fas216_checkmagic(info);
867
868 if (info->dma.transfer_type == fasdma_real_all ||
869 info->dma.transfer_type == fasdma_real_block)
870 info->dma.stop(info->host, &info->scsi.SCp);
871
872 info->dma.transfer_type = fasdma_none;
873 fas216_cmd(info, CMD_FLUSHFIFO);
874 }
875
876 static void fas216_kick(FAS216_Info *info);
877
878 /**
879 * fas216_disconnected_intr - handle device disconnection
880 * @info: interface from which device disconnected from
881 *
882 * Handle device disconnection
883 */
884 static void fas216_disconnect_intr(FAS216_Info *info)
885 {
886 unsigned long flags;
887
888 fas216_checkmagic(info);
889
890 fas216_log(info, LOG_CONNECT, "disconnect phase=%02x",
891 info->scsi.phase);
892
893 msgqueue_flush(&info->scsi.msgs);
894
895 switch (info->scsi.phase) {
896 case PHASE_SELECTION: /* while selecting - no target */
897 case PHASE_SELSTEPS:
898 fas216_done(info, DID_NO_CONNECT);
899 break;
900
901 case PHASE_MSGIN_DISCONNECT: /* message in - disconnecting */
902 info->scsi.disconnectable = 1;
903 info->scsi.phase = PHASE_IDLE;
904 info->stats.disconnects += 1;
905 spin_lock_irqsave(&info->host_lock, flags);
906 if (info->scsi.phase == PHASE_IDLE)
907 fas216_kick(info);
908 spin_unlock_irqrestore(&info->host_lock, flags);
909 break;
910
911 case PHASE_DONE: /* at end of command - complete */
912 fas216_done(info, DID_OK);
913 break;
914
915 case PHASE_MSGOUT: /* message out - possible ABORT message */
916 if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
917 info->scsi.aborting = 0;
918 fas216_done(info, DID_ABORT);
919 break;
920 }
921
922 default: /* huh? */
923 printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n",
924 info->host->host_no, fas216_target(info), fas216_drv_phase(info));
925 print_debug_list();
926 fas216_stoptransfer(info);
927 fas216_done(info, DID_ERROR);
928 break;
929 }
930 }
931
932 /**
933 * fas216_reselected_intr - start reconnection of a device
934 * @info: interface which was reselected
935 *
936 * Start reconnection of a device
937 */
938 static void
939 fas216_reselected_intr(FAS216_Info *info)
940 {
941 unsigned int cfis, i;
942 unsigned char msg[4];
943 unsigned char target, lun, tag;
944
945 fas216_checkmagic(info);
946
947 WARN_ON(info->scsi.phase == PHASE_SELECTION ||
948 info->scsi.phase == PHASE_SELSTEPS);
949
950 cfis = fas216_readb(info, REG_CFIS);
951
952 fas216_log(info, LOG_CONNECT, "reconnect phase=%02x cfis=%02x",
953 info->scsi.phase, cfis);
954
955 cfis &= CFIS_CF;
956
957 if (cfis < 2 || cfis > 4) {
958 printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n",
959 info->host->host_no);
960 goto bad_message;
961 }
962
963 for (i = 0; i < cfis; i++)
964 msg[i] = fas216_readb(info, REG_FF);
965
966 if (!(msg[0] & (1 << info->host->this_id)) ||
967 !(msg[1] & 0x80))
968 goto initiator_error;
969
970 target = msg[0] & ~(1 << info->host->this_id);
971 target = ffs(target) - 1;
972 lun = msg[1] & 7;
973 tag = 0;
974
975 if (cfis >= 3) {
976 if (msg[2] != SIMPLE_QUEUE_TAG)
977 goto initiator_error;
978
979 tag = msg[3];
980 }
981
982 /* set up for synchronous transfers */
983 fas216_writeb(info, REG_SDID, target);
984 fas216_set_sync(info, target);
985 msgqueue_flush(&info->scsi.msgs);
986
987 fas216_log(info, LOG_CONNECT, "Reconnected: target %1x lun %1x tag %02x",
988 target, lun, tag);
989
990 if (info->scsi.disconnectable && info->SCpnt) {
991 info->scsi.disconnectable = 0;
992 if (info->SCpnt->device->id == target &&
993 info->SCpnt->device->lun == lun &&
994 info->SCpnt->tag == tag) {
995 fas216_log(info, LOG_CONNECT, "reconnected previously executing command");
996 } else {
997 queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
998 fas216_log(info, LOG_CONNECT, "had to move command to disconnected queue");
999 info->SCpnt = NULL;
1000 }
1001 }
1002 if (!info->SCpnt) {
1003 info->SCpnt = queue_remove_tgtluntag(&info->queues.disconnected,
1004 target, lun, tag);
1005 fas216_log(info, LOG_CONNECT, "had to get command");
1006 }
1007
1008 if (info->SCpnt) {
1009 /*
1010 * Restore data pointer from SAVED data pointer
1011 */
1012 info->scsi.SCp = info->SCpnt->SCp;
1013
1014 fas216_log(info, LOG_CONNECT, "data pointers: [%p, %X]",
1015 info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1016 info->scsi.phase = PHASE_MSGIN;
1017 } else {
1018 /*
1019 * Our command structure not found - abort the
1020 * command on the target. Since we have no
1021 * record of this command, we can't send
1022 * an INITIATOR DETECTED ERROR message.
1023 */
1024 fas216_cmd(info, CMD_SETATN);
1025
1026 #if 0
1027 if (tag)
1028 msgqueue_addmsg(&info->scsi.msgs, 2, ABORT_TAG, tag);
1029 else
1030 #endif
1031 msgqueue_addmsg(&info->scsi.msgs, 1, ABORT);
1032 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1033 info->scsi.aborting = 1;
1034 }
1035
1036 fas216_cmd(info, CMD_MSGACCEPTED);
1037 return;
1038
1039 initiator_error:
1040 printk(KERN_ERR "scsi%d.H: error during reselection: bytes",
1041 info->host->host_no);
1042 for (i = 0; i < cfis; i++)
1043 printk(" %02x", msg[i]);
1044 printk("\n");
1045 bad_message:
1046 fas216_cmd(info, CMD_SETATN);
1047 msgqueue_flush(&info->scsi.msgs);
1048 msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
1049 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1050 fas216_cmd(info, CMD_MSGACCEPTED);
1051 }
1052
1053 static void fas216_parse_message(FAS216_Info *info, unsigned char *message, int msglen)
1054 {
1055 int i;
1056
1057 switch (message[0]) {
1058 case COMMAND_COMPLETE:
1059 if (msglen != 1)
1060 goto unrecognised;
1061
1062 printk(KERN_ERR "scsi%d.%c: command complete with no "
1063 "status in MESSAGE_IN?\n",
1064 info->host->host_no, fas216_target(info));
1065 break;
1066
1067 case SAVE_POINTERS:
1068 if (msglen != 1)
1069 goto unrecognised;
1070
1071 /*
1072 * Save current data pointer to SAVED data pointer
1073 * SCSI II standard says that we must not acknowledge
1074 * this until we have really saved pointers.
1075 * NOTE: we DO NOT save the command nor status pointers
1076 * as required by the SCSI II standard. These always
1077 * point to the start of their respective areas.
1078 */
1079 info->SCpnt->SCp = info->scsi.SCp;
1080 info->SCpnt->SCp.sent_command = 0;
1081 fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
1082 "save data pointers: [%p, %X]",
1083 info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1084 break;
1085
1086 case RESTORE_POINTERS:
1087 if (msglen != 1)
1088 goto unrecognised;
1089
1090 /*
1091 * Restore current data pointer from SAVED data pointer
1092 */
1093 info->scsi.SCp = info->SCpnt->SCp;
1094 fas216_log(info, LOG_CONNECT | LOG_MESSAGES | LOG_BUFFER,
1095 "restore data pointers: [%p, 0x%x]",
1096 info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1097 break;
1098
1099 case DISCONNECT:
1100 if (msglen != 1)
1101 goto unrecognised;
1102
1103 info->scsi.phase = PHASE_MSGIN_DISCONNECT;
1104 break;
1105
1106 case MESSAGE_REJECT:
1107 if (msglen != 1)
1108 goto unrecognised;
1109
1110 switch (fas216_get_last_msg(info, info->scsi.msgin_fifo)) {
1111 case EXTENDED_MESSAGE | EXTENDED_SDTR << 8:
1112 fas216_handlesync(info, message);
1113 break;
1114
1115 default:
1116 fas216_log(info, 0, "reject, last message 0x%04x",
1117 fas216_get_last_msg(info, info->scsi.msgin_fifo));
1118 }
1119 break;
1120
1121 case NOP:
1122 break;
1123
1124 case EXTENDED_MESSAGE:
1125 if (msglen < 3)
1126 goto unrecognised;
1127
1128 switch (message[2]) {
1129 case EXTENDED_SDTR: /* Sync transfer negotiation request/reply */
1130 fas216_handlesync(info, message);
1131 break;
1132
1133 default:
1134 goto unrecognised;
1135 }
1136 break;
1137
1138 default:
1139 goto unrecognised;
1140 }
1141 return;
1142
1143 unrecognised:
1144 fas216_log(info, 0, "unrecognised message, rejecting");
1145 printk("scsi%d.%c: message was", info->host->host_no, fas216_target(info));
1146 for (i = 0; i < msglen; i++)
1147 printk("%s%02X", i & 31 ? " " : "\n ", message[i]);
1148 printk("\n");
1149
1150 /*
1151 * Something strange seems to be happening here -
1152 * I can't use SETATN since the chip gives me an
1153 * invalid command interrupt when I do. Weird.
1154 */
1155 fas216_cmd(info, CMD_NOP);
1156 fas216_dumpstate(info);
1157 fas216_cmd(info, CMD_SETATN);
1158 msgqueue_flush(&info->scsi.msgs);
1159 msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT);
1160 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1161 fas216_dumpstate(info);
1162 }
1163
1164 static int fas216_wait_cmd(FAS216_Info *info, int cmd)
1165 {
1166 int tout;
1167 int stat;
1168
1169 fas216_cmd(info, cmd);
1170
1171 for (tout = 1000; tout; tout -= 1) {
1172 stat = fas216_readb(info, REG_STAT);
1173 if (stat & (STAT_INT|STAT_PARITYERROR))
1174 break;
1175 udelay(1);
1176 }
1177
1178 return stat;
1179 }
1180
1181 static int fas216_get_msg_byte(FAS216_Info *info)
1182 {
1183 unsigned int stat = fas216_wait_cmd(info, CMD_MSGACCEPTED);
1184
1185 if ((stat & STAT_INT) == 0)
1186 goto timedout;
1187
1188 if ((stat & STAT_BUSMASK) != STAT_MESGIN)
1189 goto unexpected_phase_change;
1190
1191 fas216_readb(info, REG_INST);
1192
1193 stat = fas216_wait_cmd(info, CMD_TRANSFERINFO);
1194
1195 if ((stat & STAT_INT) == 0)
1196 goto timedout;
1197
1198 if (stat & STAT_PARITYERROR)
1199 goto parity_error;
1200
1201 if ((stat & STAT_BUSMASK) != STAT_MESGIN)
1202 goto unexpected_phase_change;
1203
1204 fas216_readb(info, REG_INST);
1205
1206 return fas216_readb(info, REG_FF);
1207
1208 timedout:
1209 fas216_log(info, LOG_ERROR, "timed out waiting for message byte");
1210 return -1;
1211
1212 unexpected_phase_change:
1213 fas216_log(info, LOG_ERROR, "unexpected phase change: status = %02x", stat);
1214 return -2;
1215
1216 parity_error:
1217 fas216_log(info, LOG_ERROR, "parity error during message in phase");
1218 return -3;
1219 }
1220
1221 /**
1222 * fas216_message - handle a function done interrupt from FAS216 chip
1223 * @info: interface which caused function done interrupt
1224 *
1225 * Handle a function done interrupt from FAS216 chip
1226 */
1227 static void fas216_message(FAS216_Info *info)
1228 {
1229 unsigned char *message = info->scsi.message;
1230 unsigned int msglen = 1;
1231 int msgbyte = 0;
1232
1233 fas216_checkmagic(info);
1234
1235 message[0] = fas216_readb(info, REG_FF);
1236
1237 if (message[0] == EXTENDED_MESSAGE) {
1238 msgbyte = fas216_get_msg_byte(info);
1239
1240 if (msgbyte >= 0) {
1241 message[1] = msgbyte;
1242
1243 for (msglen = 2; msglen < message[1] + 2; msglen++) {
1244 msgbyte = fas216_get_msg_byte(info);
1245
1246 if (msgbyte >= 0)
1247 message[msglen] = msgbyte;
1248 else
1249 break;
1250 }
1251 }
1252 }
1253
1254 if (msgbyte == -3)
1255 goto parity_error;
1256
1257 #ifdef DEBUG_MESSAGES
1258 {
1259 int i;
1260
1261 printk("scsi%d.%c: message in: ",
1262 info->host->host_no, fas216_target(info));
1263 for (i = 0; i < msglen; i++)
1264 printk("%02X ", message[i]);
1265 printk("\n");
1266 }
1267 #endif
1268
1269 fas216_parse_message(info, message, msglen);
1270 fas216_cmd(info, CMD_MSGACCEPTED);
1271 return;
1272
1273 parity_error:
1274 fas216_cmd(info, CMD_SETATN);
1275 msgqueue_flush(&info->scsi.msgs);
1276 msgqueue_addmsg(&info->scsi.msgs, 1, MSG_PARITY_ERROR);
1277 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1278 fas216_cmd(info, CMD_MSGACCEPTED);
1279 return;
1280 }
1281
1282 /**
1283 * fas216_send_command - send command after all message bytes have been sent
1284 * @info: interface which caused bus service
1285 *
1286 * Send a command to a target after all message bytes have been sent
1287 */
1288 static void fas216_send_command(FAS216_Info *info)
1289 {
1290 int i;
1291
1292 fas216_checkmagic(info);
1293
1294 fas216_cmd(info, CMD_NOP|CMD_WITHDMA);
1295 fas216_cmd(info, CMD_FLUSHFIFO);
1296
1297 /* load command */
1298 for (i = info->scsi.SCp.sent_command; i < info->SCpnt->cmd_len; i++)
1299 fas216_writeb(info, REG_FF, info->SCpnt->cmnd[i]);
1300
1301 fas216_cmd(info, CMD_TRANSFERINFO);
1302
1303 info->scsi.phase = PHASE_COMMAND;
1304 }
1305
1306 /**
1307 * fas216_send_messageout - handle bus service to send a message
1308 * @info: interface which caused bus service
1309 *
1310 * Handle bus service to send a message.
1311 * Note: We do not allow the device to change the data direction!
1312 */
1313 static void fas216_send_messageout(FAS216_Info *info, int start)
1314 {
1315 unsigned int tot_msglen = msgqueue_msglength(&info->scsi.msgs);
1316
1317 fas216_checkmagic(info);
1318
1319 fas216_cmd(info, CMD_FLUSHFIFO);
1320
1321 if (tot_msglen) {
1322 struct message *msg;
1323 int msgnr = 0;
1324
1325 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
1326 int i;
1327
1328 for (i = start; i < msg->length; i++)
1329 fas216_writeb(info, REG_FF, msg->msg[i]);
1330
1331 msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF);
1332 start = 0;
1333 }
1334 } else
1335 fas216_writeb(info, REG_FF, NOP);
1336
1337 fas216_cmd(info, CMD_TRANSFERINFO);
1338
1339 info->scsi.phase = PHASE_MSGOUT;
1340 }
1341
1342 /**
1343 * fas216_busservice_intr - handle bus service interrupt from FAS216 chip
1344 * @info: interface which caused bus service interrupt
1345 * @stat: Status register contents
1346 * @is: SCSI Status register contents
1347 *
1348 * Handle a bus service interrupt from FAS216 chip
1349 */
1350 static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
1351 {
1352 fas216_checkmagic(info);
1353
1354 fas216_log(info, LOG_BUSSERVICE,
1355 "bus service: stat=%02x is=%02x phase=%02x",
1356 stat, is, info->scsi.phase);
1357
1358 switch (info->scsi.phase) {
1359 case PHASE_SELECTION:
1360 if ((is & IS_BITS) != IS_MSGBYTESENT)
1361 goto bad_is;
1362 break;
1363
1364 case PHASE_SELSTEPS:
1365 switch (is & IS_BITS) {
1366 case IS_SELARB:
1367 case IS_MSGBYTESENT:
1368 goto bad_is;
1369
1370 case IS_NOTCOMMAND:
1371 case IS_EARLYPHASE:
1372 if ((stat & STAT_BUSMASK) == STAT_MESGIN)
1373 break;
1374 goto bad_is;
1375
1376 case IS_COMPLETE:
1377 break;
1378 }
1379
1380 default:
1381 break;
1382 }
1383
1384 fas216_cmd(info, CMD_NOP);
1385
1386 #define STATE(st,ph) ((ph) << 3 | (st))
1387 /* This table describes the legal SCSI state transitions,
1388 * as described by the SCSI II spec.
1389 */
1390 switch (STATE(stat & STAT_BUSMASK, info->scsi.phase)) {
1391 case STATE(STAT_DATAIN, PHASE_SELSTEPS):/* Sel w/ steps -> Data In */
1392 case STATE(STAT_DATAIN, PHASE_MSGOUT): /* Message Out -> Data In */
1393 case STATE(STAT_DATAIN, PHASE_COMMAND): /* Command -> Data In */
1394 case STATE(STAT_DATAIN, PHASE_MSGIN): /* Message In -> Data In */
1395 info->scsi.phase = PHASE_DATAIN;
1396 fas216_transfer(info);
1397 return;
1398
1399 case STATE(STAT_DATAIN, PHASE_DATAIN): /* Data In -> Data In */
1400 case STATE(STAT_DATAOUT, PHASE_DATAOUT):/* Data Out -> Data Out */
1401 fas216_cleanuptransfer(info);
1402 fas216_transfer(info);
1403 return;
1404
1405 case STATE(STAT_DATAOUT, PHASE_SELSTEPS):/* Sel w/ steps-> Data Out */
1406 case STATE(STAT_DATAOUT, PHASE_MSGOUT): /* Message Out -> Data Out */
1407 case STATE(STAT_DATAOUT, PHASE_COMMAND):/* Command -> Data Out */
1408 case STATE(STAT_DATAOUT, PHASE_MSGIN): /* Message In -> Data Out */
1409 fas216_cmd(info, CMD_FLUSHFIFO);
1410 info->scsi.phase = PHASE_DATAOUT;
1411 fas216_transfer(info);
1412 return;
1413
1414 case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */
1415 case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */
1416 fas216_stoptransfer(info);
1417 case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */
1418 case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */
1419 case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */
1420 case STATE(STAT_STATUS, PHASE_MSGIN): /* Message In -> Status */
1421 fas216_cmd(info, CMD_INITCMDCOMPLETE);
1422 info->scsi.phase = PHASE_STATUS;
1423 return;
1424
1425 case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out -> Message In */
1426 case STATE(STAT_MESGIN, PHASE_DATAIN): /* Data In -> Message In */
1427 fas216_stoptransfer(info);
1428 case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */
1429 case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In */
1430 case STATE(STAT_MESGIN, PHASE_MSGOUT): /* Message Out -> Message In */
1431 info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
1432 fas216_cmd(info, CMD_FLUSHFIFO);
1433 fas216_cmd(info, CMD_TRANSFERINFO);
1434 info->scsi.phase = PHASE_MSGIN;
1435 return;
1436
1437 case STATE(STAT_MESGIN, PHASE_MSGIN):
1438 info->scsi.msgin_fifo = fas216_readb(info, REG_CFIS) & CFIS_CF;
1439 fas216_cmd(info, CMD_TRANSFERINFO);
1440 return;
1441
1442 case STATE(STAT_COMMAND, PHASE_MSGOUT): /* Message Out -> Command */
1443 case STATE(STAT_COMMAND, PHASE_MSGIN): /* Message In -> Command */
1444 fas216_send_command(info);
1445 info->scsi.phase = PHASE_COMMAND;
1446 return;
1447
1448
1449 /*
1450 * Selection -> Message Out
1451 */
1452 case STATE(STAT_MESGOUT, PHASE_SELECTION):
1453 fas216_send_messageout(info, 1);
1454 return;
1455
1456 /*
1457 * Message Out -> Message Out
1458 */
1459 case STATE(STAT_MESGOUT, PHASE_SELSTEPS):
1460 case STATE(STAT_MESGOUT, PHASE_MSGOUT):
1461 /*
1462 * If we get another message out phase, this usually
1463 * means some parity error occurred. Resend complete
1464 * set of messages. If we have more than one byte to
1465 * send, we need to assert ATN again.
1466 */
1467 if (info->device[info->SCpnt->device->id].parity_check) {
1468 /*
1469 * We were testing... good, the device
1470 * supports parity checking.
1471 */
1472 info->device[info->SCpnt->device->id].parity_check = 0;
1473 info->device[info->SCpnt->device->id].parity_enabled = 1;
1474 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
1475 }
1476
1477 if (msgqueue_msglength(&info->scsi.msgs) > 1)
1478 fas216_cmd(info, CMD_SETATN);
1479 /*FALLTHROUGH*/
1480
1481 /*
1482 * Any -> Message Out
1483 */
1484 case STATE(STAT_MESGOUT, PHASE_MSGOUT_EXPECT):
1485 fas216_send_messageout(info, 0);
1486 return;
1487
1488 /* Error recovery rules.
1489 * These either attempt to abort or retry the operation.
1490 * TODO: we need more of these
1491 */
1492 case STATE(STAT_COMMAND, PHASE_COMMAND):/* Command -> Command */
1493 /* error - we've sent out all the command bytes
1494 * we have.
1495 * NOTE: we need SAVE DATA POINTERS/RESTORE DATA POINTERS
1496 * to include the command bytes sent for this to work
1497 * correctly.
1498 */
1499 printk(KERN_ERR "scsi%d.%c: "
1500 "target trying to receive more command bytes\n",
1501 info->host->host_no, fas216_target(info));
1502 fas216_cmd(info, CMD_SETATN);
1503 fas216_set_stc(info, 15);
1504 fas216_cmd(info, CMD_PADBYTES | CMD_WITHDMA);
1505 msgqueue_flush(&info->scsi.msgs);
1506 msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
1507 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1508 return;
1509 }
1510
1511 if (info->scsi.phase == PHASE_MSGIN_DISCONNECT) {
1512 printk(KERN_ERR "scsi%d.%c: disconnect message received, but bus service %s?\n",
1513 info->host->host_no, fas216_target(info),
1514 fas216_bus_phase(stat));
1515 msgqueue_flush(&info->scsi.msgs);
1516 fas216_cmd(info, CMD_SETATN);
1517 msgqueue_addmsg(&info->scsi.msgs, 1, INITIATOR_ERROR);
1518 info->scsi.phase = PHASE_MSGOUT_EXPECT;
1519 info->scsi.aborting = 1;
1520 fas216_cmd(info, CMD_TRANSFERINFO);
1521 return;
1522 }
1523 printk(KERN_ERR "scsi%d.%c: bus phase %s after %s?\n",
1524 info->host->host_no, fas216_target(info),
1525 fas216_bus_phase(stat),
1526 fas216_drv_phase(info));
1527 print_debug_list();
1528 return;
1529
1530 bad_is:
1531 fas216_log(info, 0, "bus service at step %d?", is & IS_BITS);
1532 fas216_dumpstate(info);
1533 print_debug_list();
1534
1535 fas216_done(info, DID_ERROR);
1536 }
1537
1538 /**
1539 * fas216_funcdone_intr - handle a function done interrupt from FAS216 chip
1540 * @info: interface which caused function done interrupt
1541 * @stat: Status register contents
1542 * @is: SCSI Status register contents
1543 *
1544 * Handle a function done interrupt from FAS216 chip
1545 */
1546 static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned int is)
1547 {
1548 unsigned int fifo_len = fas216_readb(info, REG_CFIS) & CFIS_CF;
1549
1550 fas216_checkmagic(info);
1551
1552 fas216_log(info, LOG_FUNCTIONDONE,
1553 "function done: stat=%02x is=%02x phase=%02x",
1554 stat, is, info->scsi.phase);
1555
1556 switch (info->scsi.phase) {
1557 case PHASE_STATUS: /* status phase - read status and msg */
1558 if (fifo_len != 2) {
1559 fas216_log(info, 0, "odd number of bytes in FIFO: %d", fifo_len);
1560 }
1561 /*
1562 * Read status then message byte.
1563 */
1564 info->scsi.SCp.Status = fas216_readb(info, REG_FF);
1565 info->scsi.SCp.Message = fas216_readb(info, REG_FF);
1566 info->scsi.phase = PHASE_DONE;
1567 fas216_cmd(info, CMD_MSGACCEPTED);
1568 break;
1569
1570 case PHASE_IDLE:
1571 case PHASE_SELECTION:
1572 case PHASE_SELSTEPS:
1573 break;
1574
1575 case PHASE_MSGIN: /* message in phase */
1576 if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
1577 info->scsi.msgin_fifo = fifo_len;
1578 fas216_message(info);
1579 break;
1580 }
1581
1582 default:
1583 fas216_log(info, 0, "internal phase %s for function done?"
1584 " What do I do with this?",
1585 fas216_target(info), fas216_drv_phase(info));
1586 }
1587 }
1588
1589 static void fas216_bus_reset(FAS216_Info *info)
1590 {
1591 neg_t sync_state;
1592 int i;
1593
1594 msgqueue_flush(&info->scsi.msgs);
1595
1596 sync_state = neg_invalid;
1597
1598 #ifdef SCSI2_SYNC
1599 if (info->ifcfg.capabilities & (FASCAP_DMA|FASCAP_PSEUDODMA))
1600 sync_state = neg_wait;
1601 #endif
1602
1603 info->scsi.phase = PHASE_IDLE;
1604 info->SCpnt = NULL; /* bug! */
1605 memset(&info->scsi.SCp, 0, sizeof(info->scsi.SCp));
1606
1607 for (i = 0; i < 8; i++) {
1608 info->device[i].disconnect_ok = info->ifcfg.disconnect_ok;
1609 info->device[i].sync_state = sync_state;
1610 info->device[i].period = info->ifcfg.asyncperiod / 4;
1611 info->device[i].stp = info->scsi.async_stp;
1612 info->device[i].sof = 0;
1613 info->device[i].wide_xfer = 0;
1614 }
1615
1616 info->rst_bus_status = 1;
1617 wake_up(&info->eh_wait);
1618 }
1619
1620 /**
1621 * fas216_intr - handle interrupts to progress a command
1622 * @info: interface to service
1623 *
1624 * Handle interrupts from the interface to progress a command
1625 */
1626 irqreturn_t fas216_intr(FAS216_Info *info)
1627 {
1628 unsigned char inst, is, stat;
1629 int handled = IRQ_NONE;
1630
1631 fas216_checkmagic(info);
1632
1633 stat = fas216_readb(info, REG_STAT);
1634 is = fas216_readb(info, REG_IS);
1635 inst = fas216_readb(info, REG_INST);
1636
1637 add_debug_list(stat, is, inst, info->scsi.phase);
1638
1639 if (stat & STAT_INT) {
1640 if (inst & INST_BUSRESET) {
1641 fas216_log(info, 0, "bus reset detected");
1642 fas216_bus_reset(info);
1643 scsi_report_bus_reset(info->host, 0);
1644 } else if (inst & INST_ILLEGALCMD) {
1645 fas216_log(info, LOG_ERROR, "illegal command given\n");
1646 fas216_dumpstate(info);
1647 print_debug_list();
1648 } else if (inst & INST_DISCONNECT)
1649 fas216_disconnect_intr(info);
1650 else if (inst & INST_RESELECTED) /* reselected */
1651 fas216_reselected_intr(info);
1652 else if (inst & INST_BUSSERVICE) /* bus service request */
1653 fas216_busservice_intr(info, stat, is);
1654 else if (inst & INST_FUNCDONE) /* function done */
1655 fas216_funcdone_intr(info, stat, is);
1656 else
1657 fas216_log(info, 0, "unknown interrupt received:"
1658 " phase %s inst %02X is %02X stat %02X",
1659 fas216_drv_phase(info), inst, is, stat);
1660 handled = IRQ_HANDLED;
1661 }
1662 return handled;
1663 }
1664
1665 static void __fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
1666 {
1667 int tot_msglen;
1668
1669 /* following what the ESP driver says */
1670 fas216_set_stc(info, 0);
1671 fas216_cmd(info, CMD_NOP | CMD_WITHDMA);
1672
1673 /* flush FIFO */
1674 fas216_cmd(info, CMD_FLUSHFIFO);
1675
1676 /* load bus-id and timeout */
1677 fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id));
1678 fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
1679
1680 /* synchronous transfers */
1681 fas216_set_sync(info, SCpnt->device->id);
1682
1683 tot_msglen = msgqueue_msglength(&info->scsi.msgs);
1684
1685 #ifdef DEBUG_MESSAGES
1686 {
1687 struct message *msg;
1688 int msgnr = 0, i;
1689
1690 printk("scsi%d.%c: message out: ",
1691 info->host->host_no, '0' + SCpnt->device->id);
1692 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
1693 printk("{ ");
1694 for (i = 0; i < msg->length; i++)
1695 printk("%02x ", msg->msg[i]);
1696 printk("} ");
1697 }
1698 printk("\n");
1699 }
1700 #endif
1701
1702 if (tot_msglen == 1 || tot_msglen == 3) {
1703 /*
1704 * We have an easy message length to send...
1705 */
1706 struct message *msg;
1707 int msgnr = 0, i;
1708
1709 info->scsi.phase = PHASE_SELSTEPS;
1710
1711 /* load message bytes */
1712 while ((msg = msgqueue_getmsg(&info->scsi.msgs, msgnr++)) != NULL) {
1713 for (i = 0; i < msg->length; i++)
1714 fas216_writeb(info, REG_FF, msg->msg[i]);
1715 msg->fifo = tot_msglen - (fas216_readb(info, REG_CFIS) & CFIS_CF);
1716 }
1717
1718 /* load command */
1719 for (i = 0; i < SCpnt->cmd_len; i++)
1720 fas216_writeb(info, REG_FF, SCpnt->cmnd[i]);
1721
1722 if (tot_msglen == 1)
1723 fas216_cmd(info, CMD_SELECTATN);
1724 else
1725 fas216_cmd(info, CMD_SELECTATN3);
1726 } else {
1727 /*
1728 * We have an unusual number of message bytes to send.
1729 * Load first byte into fifo, and issue SELECT with ATN and
1730 * stop steps.
1731 */
1732 struct message *msg = msgqueue_getmsg(&info->scsi.msgs, 0);
1733
1734 fas216_writeb(info, REG_FF, msg->msg[0]);
1735 msg->fifo = 1;
1736
1737 fas216_cmd(info, CMD_SELECTATNSTOP);
1738 }
1739 }
1740
1741 /*
1742 * Decide whether we need to perform a parity test on this device.
1743 * Can also be used to force parity error conditions during initial
1744 * information transfer phase (message out) for test purposes.
1745 */
1746 static int parity_test(FAS216_Info *info, int target)
1747 {
1748 #if 0
1749 if (target == 3) {
1750 info->device[target].parity_check = 0;
1751 return 1;
1752 }
1753 #endif
1754 return info->device[target].parity_check;
1755 }
1756
1757 static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
1758 {
1759 int disconnect_ok;
1760
1761 /*
1762 * claim host busy
1763 */
1764 info->scsi.phase = PHASE_SELECTION;
1765 info->scsi.SCp = SCpnt->SCp;
1766 info->SCpnt = SCpnt;
1767 info->dma.transfer_type = fasdma_none;
1768
1769 if (parity_test(info, SCpnt->device->id))
1770 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_PTE);
1771 else
1772 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
1773
1774 /*
1775 * Don't allow request sense commands to disconnect.
1776 */
1777 disconnect_ok = SCpnt->cmnd[0] != REQUEST_SENSE &&
1778 info->device[SCpnt->device->id].disconnect_ok;
1779
1780 /*
1781 * build outgoing message bytes
1782 */
1783 msgqueue_flush(&info->scsi.msgs);
1784 msgqueue_addmsg(&info->scsi.msgs, 1, IDENTIFY(disconnect_ok, SCpnt->device->lun));
1785
1786 /*
1787 * add tag message if required
1788 */
1789 if (SCpnt->tag)
1790 msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag);
1791
1792 do {
1793 #ifdef SCSI2_SYNC
1794 if ((info->device[SCpnt->device->id].sync_state == neg_wait ||
1795 info->device[SCpnt->device->id].sync_state == neg_complete) &&
1796 (SCpnt->cmnd[0] == REQUEST_SENSE ||
1797 SCpnt->cmnd[0] == INQUIRY)) {
1798 info->device[SCpnt->device->id].sync_state = neg_inprogress;
1799 msgqueue_addmsg(&info->scsi.msgs, 5,
1800 EXTENDED_MESSAGE, 3, EXTENDED_SDTR,
1801 1000 / info->ifcfg.clockrate,
1802 info->ifcfg.sync_max_depth);
1803 break;
1804 }
1805 #endif
1806 } while (0);
1807
1808 __fas216_start_command(info, SCpnt);
1809 }
1810
1811 static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt)
1812 {
1813 #ifdef SCSI2_TAG
1814 /*
1815 * tagged queuing - allocate a new tag to this command
1816 */
1817 if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE &&
1818 SCpnt->cmnd[0] != INQUIRY) {
1819 SCpnt->device->current_tag += 1;
1820 if (SCpnt->device->current_tag == 0)
1821 SCpnt->device->current_tag = 1;
1822 SCpnt->tag = SCpnt->device->current_tag;
1823 } else
1824 #endif
1825 set_bit(SCpnt->device->id * 8 +
1826 (u8)(SCpnt->device->lun & 0x7), info->busyluns);
1827
1828 info->stats.removes += 1;
1829 switch (SCpnt->cmnd[0]) {
1830 case WRITE_6:
1831 case WRITE_10:
1832 case WRITE_12:
1833 info->stats.writes += 1;
1834 break;
1835 case READ_6:
1836 case READ_10:
1837 case READ_12:
1838 info->stats.reads += 1;
1839 break;
1840 default:
1841 info->stats.miscs += 1;
1842 break;
1843 }
1844 }
1845
1846 static void fas216_do_bus_device_reset(FAS216_Info *info,
1847 struct scsi_cmnd *SCpnt)
1848 {
1849 struct message *msg;
1850
1851 /*
1852 * claim host busy
1853 */
1854 info->scsi.phase = PHASE_SELECTION;
1855 info->scsi.SCp = SCpnt->SCp;
1856 info->SCpnt = SCpnt;
1857 info->dma.transfer_type = fasdma_none;
1858
1859 fas216_log(info, LOG_ERROR, "sending bus device reset");
1860
1861 msgqueue_flush(&info->scsi.msgs);
1862 msgqueue_addmsg(&info->scsi.msgs, 1, BUS_DEVICE_RESET);
1863
1864 /* following what the ESP driver says */
1865 fas216_set_stc(info, 0);
1866 fas216_cmd(info, CMD_NOP | CMD_WITHDMA);
1867
1868 /* flush FIFO */
1869 fas216_cmd(info, CMD_FLUSHFIFO);
1870
1871 /* load bus-id and timeout */
1872 fas216_writeb(info, REG_SDID, BUSID(SCpnt->device->id));
1873 fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
1874
1875 /* synchronous transfers */
1876 fas216_set_sync(info, SCpnt->device->id);
1877
1878 msg = msgqueue_getmsg(&info->scsi.msgs, 0);
1879
1880 fas216_writeb(info, REG_FF, BUS_DEVICE_RESET);
1881 msg->fifo = 1;
1882
1883 fas216_cmd(info, CMD_SELECTATNSTOP);
1884 }
1885
1886 /**
1887 * fas216_kick - kick a command to the interface
1888 * @info: our host interface to kick
1889 *
1890 * Kick a command to the interface, interface should be idle.
1891 * Notes: Interrupts are always disabled!
1892 */
1893 static void fas216_kick(FAS216_Info *info)
1894 {
1895 struct scsi_cmnd *SCpnt = NULL;
1896 #define TYPE_OTHER 0
1897 #define TYPE_RESET 1
1898 #define TYPE_QUEUE 2
1899 int where_from = TYPE_OTHER;
1900
1901 fas216_checkmagic(info);
1902
1903 /*
1904 * Obtain the next command to process.
1905 */
1906 do {
1907 if (info->rstSCpnt) {
1908 SCpnt = info->rstSCpnt;
1909 /* don't remove it */
1910 where_from = TYPE_RESET;
1911 break;
1912 }
1913
1914 if (info->reqSCpnt) {
1915 SCpnt = info->reqSCpnt;
1916 info->reqSCpnt = NULL;
1917 break;
1918 }
1919
1920 if (info->origSCpnt) {
1921 SCpnt = info->origSCpnt;
1922 info->origSCpnt = NULL;
1923 break;
1924 }
1925
1926 /* retrieve next command */
1927 if (!SCpnt) {
1928 SCpnt = queue_remove_exclude(&info->queues.issue,
1929 info->busyluns);
1930 where_from = TYPE_QUEUE;
1931 break;
1932 }
1933 } while (0);
1934
1935 if (!SCpnt) {
1936 /*
1937 * no command pending, so enable reselection.
1938 */
1939 fas216_cmd(info, CMD_ENABLESEL);
1940 return;
1941 }
1942
1943 /*
1944 * We're going to start a command, so disable reselection
1945 */
1946 fas216_cmd(info, CMD_DISABLESEL);
1947
1948 if (info->scsi.disconnectable && info->SCpnt) {
1949 fas216_log(info, LOG_CONNECT,
1950 "moved command for %d to disconnected queue",
1951 info->SCpnt->device->id);
1952 queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
1953 info->scsi.disconnectable = 0;
1954 info->SCpnt = NULL;
1955 }
1956
1957 fas216_log_command(info, LOG_CONNECT | LOG_MESSAGES, SCpnt,
1958 "starting");
1959
1960 switch (where_from) {
1961 case TYPE_QUEUE:
1962 fas216_allocate_tag(info, SCpnt);
1963 case TYPE_OTHER:
1964 fas216_start_command(info, SCpnt);
1965 break;
1966 case TYPE_RESET:
1967 fas216_do_bus_device_reset(info, SCpnt);
1968 break;
1969 }
1970
1971 fas216_log(info, LOG_CONNECT, "select: data pointers [%p, %X]",
1972 info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
1973
1974 /*
1975 * should now get either DISCONNECT or
1976 * (FUNCTION DONE with BUS SERVICE) interrupt
1977 */
1978 }
1979
1980 /*
1981 * Clean up from issuing a BUS DEVICE RESET message to a device.
1982 */
1983 static void fas216_devicereset_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
1984 unsigned int result)
1985 {
1986 fas216_log(info, LOG_ERROR, "fas216 device reset complete");
1987
1988 info->rstSCpnt = NULL;
1989 info->rst_dev_status = 1;
1990 wake_up(&info->eh_wait);
1991 }
1992
1993 /**
1994 * fas216_rq_sns_done - Finish processing automatic request sense command
1995 * @info: interface that completed
1996 * @SCpnt: command that completed
1997 * @result: driver byte of result
1998 *
1999 * Finish processing automatic request sense command
2000 */
2001 static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
2002 unsigned int result)
2003 {
2004 fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
2005 "request sense complete, result=0x%04x%02x%02x",
2006 result, SCpnt->SCp.Message, SCpnt->SCp.Status);
2007
2008 if (result != DID_OK || SCpnt->SCp.Status != GOOD)
2009 /*
2010 * Something went wrong. Make sure that we don't
2011 * have valid data in the sense buffer that could
2012 * confuse the higher levels.
2013 */
2014 memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
2015 //printk("scsi%d.%c: sense buffer: ", info->host->host_no, '0' + SCpnt->device->id);
2016 //{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); }
2017 /*
2018 * Note that we don't set SCpnt->result, since that should
2019 * reflect the status of the command that we were asked by
2020 * the upper layers to process. This would have been set
2021 * correctly by fas216_std_done.
2022 */
2023 scsi_eh_restore_cmnd(SCpnt, &info->ses);
2024 SCpnt->scsi_done(SCpnt);
2025 }
2026
2027 /**
2028 * fas216_std_done - finish processing of standard command
2029 * @info: interface that completed
2030 * @SCpnt: command that completed
2031 * @result: driver byte of result
2032 *
2033 * Finish processing of standard command
2034 */
2035 static void
2036 fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
2037 {
2038 info->stats.fins += 1;
2039
2040 SCpnt->result = result << 16 | info->scsi.SCp.Message << 8 |
2041 info->scsi.SCp.Status;
2042
2043 fas216_log_command(info, LOG_CONNECT, SCpnt,
2044 "command complete, result=0x%08x", SCpnt->result);
2045
2046 /*
2047 * If the driver detected an error, we're all done.
2048 */
2049 if (host_byte(SCpnt->result) != DID_OK ||
2050 msg_byte(SCpnt->result) != COMMAND_COMPLETE)
2051 goto done;
2052
2053 /*
2054 * If the command returned CHECK_CONDITION or COMMAND_TERMINATED
2055 * status, request the sense information.
2056 */
2057 if (status_byte(SCpnt->result) == CHECK_CONDITION ||
2058 status_byte(SCpnt->result) == COMMAND_TERMINATED)
2059 goto request_sense;
2060
2061 /*
2062 * If the command did not complete with GOOD status,
2063 * we are all done here.
2064 */
2065 if (status_byte(SCpnt->result) != GOOD)
2066 goto done;
2067
2068 /*
2069 * We have successfully completed a command. Make sure that
2070 * we do not have any buffers left to transfer. The world
2071 * is not perfect, and we seem to occasionally hit this.
2072 * It can be indicative of a buggy driver, target or the upper
2073 * levels of the SCSI code.
2074 */
2075 if (info->scsi.SCp.ptr) {
2076 switch (SCpnt->cmnd[0]) {
2077 case INQUIRY:
2078 case START_STOP:
2079 case MODE_SENSE:
2080 break;
2081
2082 default:
2083 scmd_printk(KERN_ERR, SCpnt,
2084 "incomplete data transfer detected: res=%08X ptr=%p len=%X\n",
2085 SCpnt->result, info->scsi.SCp.ptr,
2086 info->scsi.SCp.this_residual);
2087 scsi_print_command(SCpnt);
2088 set_host_byte(SCpnt, DID_ERROR);
2089 goto request_sense;
2090 }
2091 }
2092
2093 done:
2094 if (SCpnt->scsi_done) {
2095 SCpnt->scsi_done(SCpnt);
2096 return;
2097 }
2098
2099 panic("scsi%d.H: null scsi_done function in fas216_done",
2100 info->host->host_no);
2101
2102
2103 request_sense:
2104 if (SCpnt->cmnd[0] == REQUEST_SENSE)
2105 goto done;
2106
2107 scsi_eh_prep_cmnd(SCpnt, &info->ses, NULL, 0, ~0);
2108 fas216_log_target(info, LOG_CONNECT, SCpnt->device->id,
2109 "requesting sense");
2110 init_SCp(SCpnt);
2111 SCpnt->SCp.Message = 0;
2112 SCpnt->SCp.Status = 0;
2113 SCpnt->tag = 0;
2114 SCpnt->host_scribble = (void *)fas216_rq_sns_done;
2115
2116 /*
2117 * Place this command into the high priority "request
2118 * sense" slot. This will be the very next command
2119 * executed, unless a target connects to us.
2120 */
2121 if (info->reqSCpnt)
2122 printk(KERN_WARNING "scsi%d.%c: losing request command\n",
2123 info->host->host_no, '0' + SCpnt->device->id);
2124 info->reqSCpnt = SCpnt;
2125 }
2126
2127 /**
2128 * fas216_done - complete processing for current command
2129 * @info: interface that completed
2130 * @result: driver byte of result
2131 *
2132 * Complete processing for current command
2133 */
2134 static void fas216_done(FAS216_Info *info, unsigned int result)
2135 {
2136 void (*fn)(FAS216_Info *, struct scsi_cmnd *, unsigned int);
2137 struct scsi_cmnd *SCpnt;
2138 unsigned long flags;
2139
2140 fas216_checkmagic(info);
2141
2142 if (!info->SCpnt)
2143 goto no_command;
2144
2145 SCpnt = info->SCpnt;
2146 info->SCpnt = NULL;
2147 info->scsi.phase = PHASE_IDLE;
2148
2149 if (info->scsi.aborting) {
2150 fas216_log(info, 0, "uncaught abort - returning DID_ABORT");
2151 result = DID_ABORT;
2152 info->scsi.aborting = 0;
2153 }
2154
2155 /*
2156 * Sanity check the completion - if we have zero bytes left
2157 * to transfer, we should not have a valid pointer.
2158 */
2159 if (info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) {
2160 scmd_printk(KERN_INFO, SCpnt,
2161 "zero bytes left to transfer, but buffer pointer still valid: ptr=%p len=%08x\n",
2162 info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
2163 info->scsi.SCp.ptr = NULL;
2164 scsi_print_command(SCpnt);
2165 }
2166
2167 /*
2168 * Clear down this command as completed. If we need to request
2169 * the sense information, fas216_kick will re-assert the busy
2170 * status.
2171 */
2172 info->device[SCpnt->device->id].parity_check = 0;
2173 clear_bit(SCpnt->device->id * 8 +
2174 (u8)(SCpnt->device->lun & 0x7), info->busyluns);
2175
2176 fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
2177 fn(info, SCpnt, result);
2178
2179 if (info->scsi.irq) {
2180 spin_lock_irqsave(&info->host_lock, flags);
2181 if (info->scsi.phase == PHASE_IDLE)
2182 fas216_kick(info);
2183 spin_unlock_irqrestore(&info->host_lock, flags);
2184 }
2185 return;
2186
2187 no_command:
2188 panic("scsi%d.H: null command in fas216_done",
2189 info->host->host_no);
2190 }
2191
2192 /**
2193 * fas216_queue_command - queue a command for adapter to process.
2194 * @SCpnt: Command to queue
2195 * @done: done function to call once command is complete
2196 *
2197 * Queue a command for adapter to process.
2198 * Returns: 0 on success, else error.
2199 * Notes: io_request_lock is held, interrupts are disabled.
2200 */
2201 static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
2202 void (*done)(struct scsi_cmnd *))
2203 {
2204 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2205 int result;
2206
2207 fas216_checkmagic(info);
2208
2209 fas216_log_command(info, LOG_CONNECT, SCpnt,
2210 "received command (%p)", SCpnt);
2211
2212 SCpnt->scsi_done = done;
2213 SCpnt->host_scribble = (void *)fas216_std_done;
2214 SCpnt->result = 0;
2215
2216 init_SCp(SCpnt);
2217
2218 info->stats.queues += 1;
2219 SCpnt->tag = 0;
2220
2221 spin_lock(&info->host_lock);
2222
2223 /*
2224 * Add command into execute queue and let it complete under
2225 * whatever scheme we're using.
2226 */
2227 result = !queue_add_cmd_ordered(&info->queues.issue, SCpnt);
2228
2229 /*
2230 * If we successfully added the command,
2231 * kick the interface to get it moving.
2232 */
2233 if (result == 0 && info->scsi.phase == PHASE_IDLE)
2234 fas216_kick(info);
2235 spin_unlock(&info->host_lock);
2236
2237 fas216_log_target(info, LOG_CONNECT, -1, "queue %s",
2238 result ? "failure" : "success");
2239
2240 return result;
2241 }
2242
2243 DEF_SCSI_QCMD(fas216_queue_command)
2244
2245 /**
2246 * fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
2247 * @SCpnt: Command to wake
2248 *
2249 * Trigger restart of a waiting thread in fas216_command
2250 */
2251 static void fas216_internal_done(struct scsi_cmnd *SCpnt)
2252 {
2253 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2254
2255 fas216_checkmagic(info);
2256
2257 info->internal_done = 1;
2258 }
2259
2260 /**
2261 * fas216_noqueue_command - process a command for the adapter.
2262 * @SCpnt: Command to queue
2263 *
2264 * Queue a command for adapter to process.
2265 * Returns: scsi result code.
2266 * Notes: io_request_lock is held, interrupts are disabled.
2267 */
2268 static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
2269 void (*done)(struct scsi_cmnd *))
2270 {
2271 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2272
2273 fas216_checkmagic(info);
2274
2275 /*
2276 * We should only be using this if we don't have an interrupt.
2277 * Provide some "incentive" to use the queueing code.
2278 */
2279 BUG_ON(info->scsi.irq);
2280
2281 info->internal_done = 0;
2282 fas216_queue_command_lck(SCpnt, fas216_internal_done);
2283
2284 /*
2285 * This wastes time, since we can't return until the command is
2286 * complete. We can't sleep either since we may get re-entered!
2287 * However, we must re-enable interrupts, or else we'll be
2288 * waiting forever.
2289 */
2290 spin_unlock_irq(info->host->host_lock);
2291
2292 while (!info->internal_done) {
2293 /*
2294 * If we don't have an IRQ, then we must poll the card for
2295 * it's interrupt, and use that to call this driver's
2296 * interrupt routine. That way, we keep the command
2297 * progressing. Maybe we can add some intelligence here
2298 * and go to sleep if we know that the device is going
2299 * to be some time (eg, disconnected).
2300 */
2301 if (fas216_readb(info, REG_STAT) & STAT_INT) {
2302 spin_lock_irq(info->host->host_lock);
2303 fas216_intr(info);
2304 spin_unlock_irq(info->host->host_lock);
2305 }
2306 }
2307
2308 spin_lock_irq(info->host->host_lock);
2309
2310 done(SCpnt);
2311
2312 return 0;
2313 }
2314
2315 DEF_SCSI_QCMD(fas216_noqueue_command)
2316
2317 /*
2318 * Error handler timeout function. Indicate that we timed out,
2319 * and wake up any error handler process so it can continue.
2320 */
2321 static void fas216_eh_timer(unsigned long data)
2322 {
2323 FAS216_Info *info = (FAS216_Info *)data;
2324
2325 fas216_log(info, LOG_ERROR, "error handling timed out\n");
2326
2327 del_timer(&info->eh_timer);
2328
2329 if (info->rst_bus_status == 0)
2330 info->rst_bus_status = -1;
2331 if (info->rst_dev_status == 0)
2332 info->rst_dev_status = -1;
2333
2334 wake_up(&info->eh_wait);
2335 }
2336
2337 enum res_find {
2338 res_failed, /* not found */
2339 res_success, /* command on issue queue */
2340 res_hw_abort /* command on disconnected dev */
2341 };
2342
2343 /**
2344 * fas216_do_abort - decide how to abort a command
2345 * @SCpnt: command to abort
2346 *
2347 * Decide how to abort a command.
2348 * Returns: abort status
2349 */
2350 static enum res_find fas216_find_command(FAS216_Info *info,
2351 struct scsi_cmnd *SCpnt)
2352 {
2353 enum res_find res = res_failed;
2354
2355 if (queue_remove_cmd(&info->queues.issue, SCpnt)) {
2356 /*
2357 * The command was on the issue queue, and has not been
2358 * issued yet. We can remove the command from the queue,
2359 * and acknowledge the abort. Neither the device nor the
2360 * interface know about the command.
2361 */
2362 printk("on issue queue ");
2363
2364 res = res_success;
2365 } else if (queue_remove_cmd(&info->queues.disconnected, SCpnt)) {
2366 /*
2367 * The command was on the disconnected queue. We must
2368 * reconnect with the device if possible, and send it
2369 * an abort message.
2370 */
2371 printk("on disconnected queue ");
2372
2373 res = res_hw_abort;
2374 } else if (info->SCpnt == SCpnt) {
2375 printk("executing ");
2376
2377 switch (info->scsi.phase) {
2378 /*
2379 * If the interface is idle, and the command is 'disconnectable',
2380 * then it is the same as on the disconnected queue.
2381 */
2382 case PHASE_IDLE:
2383 if (info->scsi.disconnectable) {
2384 info->scsi.disconnectable = 0;
2385 info->SCpnt = NULL;
2386 res = res_hw_abort;
2387 }
2388 break;
2389
2390 default:
2391 break;
2392 }
2393 } else if (info->origSCpnt == SCpnt) {
2394 /*
2395 * The command will be executed next, but a command
2396 * is currently using the interface. This is similar to
2397 * being on the issue queue, except the busylun bit has
2398 * been set.
2399 */
2400 info->origSCpnt = NULL;
2401 clear_bit(SCpnt->device->id * 8 +
2402 (u8)(SCpnt->device->lun & 0x7), info->busyluns);
2403 printk("waiting for execution ");
2404 res = res_success;
2405 } else
2406 printk("unknown ");
2407
2408 return res;
2409 }
2410
2411 /**
2412 * fas216_eh_abort - abort this command
2413 * @SCpnt: command to abort
2414 *
2415 * Abort this command.
2416 * Returns: FAILED if unable to abort
2417 * Notes: io_request_lock is taken, and irqs are disabled
2418 */
2419 int fas216_eh_abort(struct scsi_cmnd *SCpnt)
2420 {
2421 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2422 int result = FAILED;
2423
2424 fas216_checkmagic(info);
2425
2426 info->stats.aborts += 1;
2427
2428 scmd_printk(KERN_WARNING, SCpnt, "abort command\n");
2429
2430 print_debug_list();
2431 fas216_dumpstate(info);
2432
2433 switch (fas216_find_command(info, SCpnt)) {
2434 /*
2435 * We found the command, and cleared it out. Either
2436 * the command is still known to be executing on the
2437 * target, or the busylun bit is not set.
2438 */
2439 case res_success:
2440 scmd_printk(KERN_WARNING, SCpnt, "abort %p success\n", SCpnt);
2441 result = SUCCESS;
2442 break;
2443
2444 /*
2445 * We need to reconnect to the target and send it an
2446 * ABORT or ABORT_TAG message. We can only do this
2447 * if the bus is free.
2448 */
2449 case res_hw_abort:
2450
2451 /*
2452 * We are unable to abort the command for some reason.
2453 */
2454 default:
2455 case res_failed:
2456 scmd_printk(KERN_WARNING, SCpnt, "abort %p failed\n", SCpnt);
2457 break;
2458 }
2459
2460 return result;
2461 }
2462
2463 /**
2464 * fas216_eh_device_reset - Reset the device associated with this command
2465 * @SCpnt: command specifing device to reset
2466 *
2467 * Reset the device associated with this command.
2468 * Returns: FAILED if unable to reset.
2469 * Notes: We won't be re-entered, so we'll only have one device
2470 * reset on the go at one time.
2471 */
2472 int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
2473 {
2474 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2475 unsigned long flags;
2476 int i, res = FAILED, target = SCpnt->device->id;
2477
2478 fas216_log(info, LOG_ERROR, "device reset for target %d", target);
2479
2480 spin_lock_irqsave(&info->host_lock, flags);
2481
2482 do {
2483 /*
2484 * If we are currently connected to a device, and
2485 * it is the device we want to reset, there is
2486 * nothing we can do here. Chances are it is stuck,
2487 * and we need a bus reset.
2488 */
2489 if (info->SCpnt && !info->scsi.disconnectable &&
2490 info->SCpnt->device->id == SCpnt->device->id)
2491 break;
2492
2493 /*
2494 * We're going to be resetting this device. Remove
2495 * all pending commands from the driver. By doing
2496 * so, we guarantee that we won't touch the command
2497 * structures except to process the reset request.
2498 */
2499 queue_remove_all_target(&info->queues.issue, target);
2500 queue_remove_all_target(&info->queues.disconnected, target);
2501 if (info->origSCpnt && info->origSCpnt->device->id == target)
2502 info->origSCpnt = NULL;
2503 if (info->reqSCpnt && info->reqSCpnt->device->id == target)
2504 info->reqSCpnt = NULL;
2505 for (i = 0; i < 8; i++)
2506 clear_bit(target * 8 + i, info->busyluns);
2507
2508 /*
2509 * Hijack this SCSI command structure to send
2510 * a bus device reset message to this device.
2511 */
2512 SCpnt->host_scribble = (void *)fas216_devicereset_done;
2513
2514 info->rst_dev_status = 0;
2515 info->rstSCpnt = SCpnt;
2516
2517 if (info->scsi.phase == PHASE_IDLE)
2518 fas216_kick(info);
2519
2520 mod_timer(&info->eh_timer, jiffies + 30 * HZ);
2521 spin_unlock_irqrestore(&info->host_lock, flags);
2522
2523 /*
2524 * Wait up to 30 seconds for the reset to complete.
2525 */
2526 wait_event(info->eh_wait, info->rst_dev_status);
2527
2528 del_timer_sync(&info->eh_timer);
2529 spin_lock_irqsave(&info->host_lock, flags);
2530 info->rstSCpnt = NULL;
2531
2532 if (info->rst_dev_status == 1)
2533 res = SUCCESS;
2534 } while (0);
2535
2536 SCpnt->host_scribble = NULL;
2537 spin_unlock_irqrestore(&info->host_lock, flags);
2538
2539 fas216_log(info, LOG_ERROR, "device reset complete: %s\n",
2540 res == SUCCESS ? "success" : "failed");
2541
2542 return res;
2543 }
2544
2545 /**
2546 * fas216_eh_bus_reset - Reset the bus associated with the command
2547 * @SCpnt: command specifing bus to reset
2548 *
2549 * Reset the bus associated with the command.
2550 * Returns: FAILED if unable to reset.
2551 * Notes: Further commands are blocked.
2552 */
2553 int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt)
2554 {
2555 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2556 unsigned long flags;
2557 struct scsi_device *SDpnt;
2558
2559 fas216_checkmagic(info);
2560 fas216_log(info, LOG_ERROR, "resetting bus");
2561
2562 info->stats.bus_resets += 1;
2563
2564 spin_lock_irqsave(&info->host_lock, flags);
2565
2566 /*
2567 * Stop all activity on this interface.
2568 */
2569 fas216_aborttransfer(info);
2570 fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);
2571
2572 /*
2573 * Clear any pending interrupts.
2574 */
2575 while (fas216_readb(info, REG_STAT) & STAT_INT)
2576 fas216_readb(info, REG_INST);
2577
2578 info->rst_bus_status = 0;
2579
2580 /*
2581 * For each attached hard-reset device, clear out
2582 * all command structures. Leave the running
2583 * command in place.
2584 */
2585 shost_for_each_device(SDpnt, info->host) {
2586 int i;
2587
2588 if (SDpnt->soft_reset)
2589 continue;
2590
2591 queue_remove_all_target(&info->queues.issue, SDpnt->id);
2592 queue_remove_all_target(&info->queues.disconnected, SDpnt->id);
2593 if (info->origSCpnt && info->origSCpnt->device->id == SDpnt->id)
2594 info->origSCpnt = NULL;
2595 if (info->reqSCpnt && info->reqSCpnt->device->id == SDpnt->id)
2596 info->reqSCpnt = NULL;
2597 info->SCpnt = NULL;
2598
2599 for (i = 0; i < 8; i++)
2600 clear_bit(SDpnt->id * 8 + i, info->busyluns);
2601 }
2602
2603 info->scsi.phase = PHASE_IDLE;
2604
2605 /*
2606 * Reset the SCSI bus. Device cleanup happens in
2607 * the interrupt handler.
2608 */
2609 fas216_cmd(info, CMD_RESETSCSI);
2610
2611 mod_timer(&info->eh_timer, jiffies + HZ);
2612 spin_unlock_irqrestore(&info->host_lock, flags);
2613
2614 /*
2615 * Wait one second for the interrupt.
2616 */
2617 wait_event(info->eh_wait, info->rst_bus_status);
2618 del_timer_sync(&info->eh_timer);
2619
2620 fas216_log(info, LOG_ERROR, "bus reset complete: %s\n",
2621 info->rst_bus_status == 1 ? "success" : "failed");
2622
2623 return info->rst_bus_status == 1 ? SUCCESS : FAILED;
2624 }
2625
2626 /**
2627 * fas216_init_chip - Initialise FAS216 state after reset
2628 * @info: state structure for interface
2629 *
2630 * Initialise FAS216 state after reset
2631 */
2632 static void fas216_init_chip(FAS216_Info *info)
2633 {
2634 unsigned int clock = ((info->ifcfg.clockrate - 1) / 5 + 1) & 7;
2635 fas216_writeb(info, REG_CLKF, clock);
2636 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
2637 fas216_writeb(info, REG_CNTL2, info->scsi.cfg[1]);
2638 fas216_writeb(info, REG_CNTL3, info->scsi.cfg[2]);
2639 fas216_writeb(info, REG_STIM, info->ifcfg.select_timeout);
2640 fas216_writeb(info, REG_SOF, 0);
2641 fas216_writeb(info, REG_STP, info->scsi.async_stp);
2642 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
2643 }
2644
2645 /**
2646 * fas216_eh_host_reset - Reset the host associated with this command
2647 * @SCpnt: command specifing host to reset
2648 *
2649 * Reset the host associated with this command.
2650 * Returns: FAILED if unable to reset.
2651 * Notes: io_request_lock is taken, and irqs are disabled
2652 */
2653 int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
2654 {
2655 FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
2656
2657 spin_lock_irq(info->host->host_lock);
2658
2659 fas216_checkmagic(info);
2660
2661 fas216_log(info, LOG_ERROR, "resetting host");
2662
2663 /*
2664 * Reset the SCSI chip.
2665 */
2666 fas216_cmd(info, CMD_RESETCHIP);
2667
2668 /*
2669 * Ugly ugly ugly!
2670 * We need to release the host_lock and enable
2671 * IRQs if we sleep, but we must relock and disable
2672 * IRQs after the sleep.
2673 */
2674 spin_unlock_irq(info->host->host_lock);
2675 msleep(50 * 1000/100);
2676 spin_lock_irq(info->host->host_lock);
2677
2678 /*
2679 * Release the SCSI reset.
2680 */
2681 fas216_cmd(info, CMD_NOP);
2682
2683 fas216_init_chip(info);
2684
2685 spin_unlock_irq(info->host->host_lock);
2686 return SUCCESS;
2687 }
2688
2689 #define TYPE_UNKNOWN 0
2690 #define TYPE_NCR53C90 1
2691 #define TYPE_NCR53C90A 2
2692 #define TYPE_NCR53C9x 3
2693 #define TYPE_Am53CF94 4
2694 #define TYPE_EmFAS216 5
2695 #define TYPE_QLFAS216 6
2696
2697 static char *chip_types[] = {
2698 "unknown",
2699 "NS NCR53C90",
2700 "NS NCR53C90A",
2701 "NS NCR53C9x",
2702 "AMD Am53CF94",
2703 "Emulex FAS216",
2704 "QLogic FAS216"
2705 };
2706
2707 static int fas216_detect_type(FAS216_Info *info)
2708 {
2709 int family, rev;
2710
2711 /*
2712 * Reset the chip.
2713 */
2714 fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2715 udelay(50);
2716 fas216_writeb(info, REG_CMD, CMD_NOP);
2717
2718 /*
2719 * Check to see if control reg 2 is present.
2720 */
2721 fas216_writeb(info, REG_CNTL3, 0);
2722 fas216_writeb(info, REG_CNTL2, CNTL2_S2FE);
2723
2724 /*
2725 * If we are unable to read back control reg 2
2726 * correctly, it is not present, and we have a
2727 * NCR53C90.
2728 */
2729 if ((fas216_readb(info, REG_CNTL2) & (~0xe0)) != CNTL2_S2FE)
2730 return TYPE_NCR53C90;
2731
2732 /*
2733 * Now, check control register 3
2734 */
2735 fas216_writeb(info, REG_CNTL2, 0);
2736 fas216_writeb(info, REG_CNTL3, 0);
2737 fas216_writeb(info, REG_CNTL3, 5);
2738
2739 /*
2740 * If we are unable to read the register back
2741 * correctly, we have a NCR53C90A
2742 */
2743 if (fas216_readb(info, REG_CNTL3) != 5)
2744 return TYPE_NCR53C90A;
2745
2746 /*
2747 * Now read the ID from the chip.
2748 */
2749 fas216_writeb(info, REG_CNTL3, 0);
2750
2751 fas216_writeb(info, REG_CNTL3, CNTL3_ADIDCHK);
2752 fas216_writeb(info, REG_CNTL3, 0);
2753
2754 fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2755 udelay(50);
2756 fas216_writeb(info, REG_CMD, CMD_WITHDMA | CMD_NOP);
2757
2758 fas216_writeb(info, REG_CNTL2, CNTL2_ENF);
2759 fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2760 udelay(50);
2761 fas216_writeb(info, REG_CMD, CMD_NOP);
2762
2763 rev = fas216_readb(info, REG_ID);
2764 family = rev >> 3;
2765 rev &= 7;
2766
2767 switch (family) {
2768 case 0x01:
2769 if (rev == 4)
2770 return TYPE_Am53CF94;
2771 break;
2772
2773 case 0x02:
2774 switch (rev) {
2775 case 2:
2776 return TYPE_EmFAS216;
2777 case 3:
2778 return TYPE_QLFAS216;
2779 }
2780 break;
2781
2782 default:
2783 break;
2784 }
2785 printk("family %x rev %x\n", family, rev);
2786 return TYPE_NCR53C9x;
2787 }
2788
2789 /**
2790 * fas216_reset_state - Initialise driver internal state
2791 * @info: state to initialise
2792 *
2793 * Initialise driver internal state
2794 */
2795 static void fas216_reset_state(FAS216_Info *info)
2796 {
2797 int i;
2798
2799 fas216_checkmagic(info);
2800
2801 fas216_bus_reset(info);
2802
2803 /*
2804 * Clear out all stale info in our state structure
2805 */
2806 memset(info->busyluns, 0, sizeof(info->busyluns));
2807 info->scsi.disconnectable = 0;
2808 info->scsi.aborting = 0;
2809
2810 for (i = 0; i < 8; i++) {
2811 info->device[i].parity_enabled = 0;
2812 info->device[i].parity_check = 1;
2813 }
2814
2815 /*
2816 * Drain all commands on disconnected queue
2817 */
2818 while (queue_remove(&info->queues.disconnected) != NULL);
2819
2820 /*
2821 * Remove executing commands.
2822 */
2823 info->SCpnt = NULL;
2824 info->reqSCpnt = NULL;
2825 info->rstSCpnt = NULL;
2826 info->origSCpnt = NULL;
2827 }
2828
2829 /**
2830 * fas216_init - initialise FAS/NCR/AMD SCSI structures.
2831 * @host: a driver-specific filled-out structure
2832 *
2833 * Initialise FAS/NCR/AMD SCSI structures.
2834 * Returns: 0 on success
2835 */
2836 int fas216_init(struct Scsi_Host *host)
2837 {
2838 FAS216_Info *info = (FAS216_Info *)host->hostdata;
2839
2840 info->magic_start = MAGIC;
2841 info->magic_end = MAGIC;
2842 info->host = host;
2843 info->scsi.cfg[0] = host->this_id | CNTL1_PERE;
2844 info->scsi.cfg[1] = CNTL2_ENF | CNTL2_S2FE;
2845 info->scsi.cfg[2] = info->ifcfg.cntl3 |
2846 CNTL3_ADIDCHK | CNTL3_QTAG | CNTL3_G2CB | CNTL3_LBTM;
2847 info->scsi.async_stp = fas216_syncperiod(info, info->ifcfg.asyncperiod);
2848
2849 info->rst_dev_status = -1;
2850 info->rst_bus_status = -1;
2851 init_waitqueue_head(&info->eh_wait);
2852 setup_timer(&info->eh_timer, fas216_eh_timer, (unsigned long)info);
2853
2854 spin_lock_init(&info->host_lock);
2855
2856 memset(&info->stats, 0, sizeof(info->stats));
2857
2858 msgqueue_initialise(&info->scsi.msgs);
2859
2860 if (!queue_initialise(&info->queues.issue))
2861 return -ENOMEM;
2862
2863 if (!queue_initialise(&info->queues.disconnected)) {
2864 queue_free(&info->queues.issue);
2865 return -ENOMEM;
2866 }
2867
2868 return 0;
2869 }
2870
2871 /**
2872 * fas216_add - initialise FAS/NCR/AMD SCSI ic.
2873 * @host: a driver-specific filled-out structure
2874 * @dev: parent device
2875 *
2876 * Initialise FAS/NCR/AMD SCSI ic.
2877 * Returns: 0 on success
2878 */
2879 int fas216_add(struct Scsi_Host *host, struct device *dev)
2880 {
2881 FAS216_Info *info = (FAS216_Info *)host->hostdata;
2882 int type, ret;
2883
2884 if (info->ifcfg.clockrate <= 10 || info->ifcfg.clockrate > 40) {
2885 printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n",
2886 info->ifcfg.clockrate);
2887 return -EINVAL;
2888 }
2889
2890 fas216_reset_state(info);
2891 type = fas216_detect_type(info);
2892 info->scsi.type = chip_types[type];
2893
2894 udelay(300);
2895
2896 /*
2897 * Initialise the chip correctly.
2898 */
2899 fas216_init_chip(info);
2900
2901 /*
2902 * Reset the SCSI bus. We don't want to see
2903 * the resulting reset interrupt, so mask it
2904 * out.
2905 */
2906 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0] | CNTL1_DISR);
2907 fas216_writeb(info, REG_CMD, CMD_RESETSCSI);
2908
2909 /*
2910 * scsi standard says wait 250ms
2911 */
2912 spin_unlock_irq(info->host->host_lock);
2913 msleep(100*1000/100);
2914 spin_lock_irq(info->host->host_lock);
2915
2916 fas216_writeb(info, REG_CNTL1, info->scsi.cfg[0]);
2917 fas216_readb(info, REG_INST);
2918
2919 fas216_checkmagic(info);
2920
2921 ret = scsi_add_host(host, dev);
2922 if (ret)
2923 fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2924 else
2925 scsi_scan_host(host);
2926
2927 return ret;
2928 }
2929
2930 void fas216_remove(struct Scsi_Host *host)
2931 {
2932 FAS216_Info *info = (FAS216_Info *)host->hostdata;
2933
2934 fas216_checkmagic(info);
2935 scsi_remove_host(host);
2936
2937 fas216_writeb(info, REG_CMD, CMD_RESETCHIP);
2938 scsi_host_put(host);
2939 }
2940
2941 /**
2942 * fas216_release - release all resources for FAS/NCR/AMD SCSI ic.
2943 * @host: a driver-specific filled-out structure
2944 *
2945 * release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
2946 */
2947 void fas216_release(struct Scsi_Host *host)
2948 {
2949 FAS216_Info *info = (FAS216_Info *)host->hostdata;
2950
2951 queue_free(&info->queues.disconnected);
2952 queue_free(&info->queues.issue);
2953 }
2954
2955 void fas216_print_host(FAS216_Info *info, struct seq_file *m)
2956 {
2957 seq_printf(m,
2958 "\n"
2959 "Chip : %s\n"
2960 " Address: 0x%p\n"
2961 " IRQ : %d\n"
2962 " DMA : %d\n",
2963 info->scsi.type, info->scsi.io_base,
2964 info->scsi.irq, info->scsi.dma);
2965 }
2966
2967 void fas216_print_stats(FAS216_Info *info, struct seq_file *m)
2968 {
2969 seq_printf(m, "\n"
2970 "Command Statistics:\n"
2971 " Queued : %u\n"
2972 " Issued : %u\n"
2973 " Completed : %u\n"
2974 " Reads : %u\n"
2975 " Writes : %u\n"
2976 " Others : %u\n"
2977 " Disconnects: %u\n"
2978 " Aborts : %u\n"
2979 " Bus resets : %u\n"
2980 " Host resets: %u\n",
2981 info->stats.queues, info->stats.removes,
2982 info->stats.fins, info->stats.reads,
2983 info->stats.writes, info->stats.miscs,
2984 info->stats.disconnects, info->stats.aborts,
2985 info->stats.bus_resets, info->stats.host_resets);
2986 }
2987
2988 void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
2989 {
2990 struct fas216_device *dev;
2991 struct scsi_device *scd;
2992
2993 seq_puts(m, "Device/Lun TaggedQ Parity Sync\n");
2994
2995 shost_for_each_device(scd, info->host) {
2996 dev = &info->device[scd->id];
2997 seq_printf(m, " %d/%llu ", scd->id, scd->lun);
2998 if (scd->tagged_supported)
2999 seq_printf(m, "%3sabled(%3d) ",
3000 scd->simple_tags ? "en" : "dis",
3001 scd->current_tag);
3002 else
3003 seq_puts(m, "unsupported ");
3004
3005 seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");
3006
3007 if (dev->sof)
3008 seq_printf(m, "offset %d, %d ns\n",
3009 dev->sof, dev->period * 4);
3010 else
3011 seq_puts(m, "async\n");
3012 }
3013 }
3014
3015 EXPORT_SYMBOL(fas216_init);
3016 EXPORT_SYMBOL(fas216_add);
3017 EXPORT_SYMBOL(fas216_queue_command);
3018 EXPORT_SYMBOL(fas216_noqueue_command);
3019 EXPORT_SYMBOL(fas216_intr);
3020 EXPORT_SYMBOL(fas216_remove);
3021 EXPORT_SYMBOL(fas216_release);
3022 EXPORT_SYMBOL(fas216_eh_abort);
3023 EXPORT_SYMBOL(fas216_eh_device_reset);
3024 EXPORT_SYMBOL(fas216_eh_bus_reset);
3025 EXPORT_SYMBOL(fas216_eh_host_reset);
3026 EXPORT_SYMBOL(fas216_print_host);
3027 EXPORT_SYMBOL(fas216_print_stats);
3028 EXPORT_SYMBOL(fas216_print_devices);
3029
3030 MODULE_AUTHOR("Russell King");
3031 MODULE_DESCRIPTION("Generic FAS216/NCR53C9x driver core");
3032 MODULE_LICENSE("GPL");
ubuntu-bionic-kernel mirror