]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - fs/sync.c
cfg80211: prevent speculation on cfg80211_classify8021d() return
[mirror_ubuntu-bionic-kernel.git] / fs / sync.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * High-level sync()-related operations
4 */
5
6 #include <linux/kernel.h>
7 #include <linux/file.h>
8 #include <linux/fs.h>
9 #include <linux/slab.h>
10 #include <linux/export.h>
11 #include <linux/namei.h>
12 #include <linux/sched.h>
13 #include <linux/writeback.h>
14 #include <linux/syscalls.h>
15 #include <linux/linkage.h>
16 #include <linux/pagemap.h>
17 #include <linux/quotaops.h>
18 #include <linux/backing-dev.h>
19 #include "internal.h"
20
21 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
22 SYNC_FILE_RANGE_WAIT_AFTER)
23
24 /*
25 * Do the filesystem syncing work. For simple filesystems
26 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
27 * submit IO for these buffers via __sync_blockdev(). This also speeds up the
28 * wait == 1 case since in that case write_inode() functions do
29 * sync_dirty_buffer() and thus effectively write one block at a time.
30 */
31 int __sync_filesystem(struct super_block *sb, int wait)
32 {
33 if (wait)
34 sync_inodes_sb(sb);
35 else
36 writeback_inodes_sb(sb, WB_REASON_SYNC);
37
38 if (sb->s_op->sync_fs)
39 sb->s_op->sync_fs(sb, wait);
40 return __sync_blockdev(sb->s_bdev, wait);
41 }
42 EXPORT_SYMBOL_GPL(__sync_filesystem);
43
44 /*
45 * Write out and wait upon all dirty data associated with this
46 * superblock. Filesystem data as well as the underlying block
47 * device. Takes the superblock lock.
48 */
49 int sync_filesystem(struct super_block *sb)
50 {
51 int ret;
52
53 /*
54 * We need to be protected against the filesystem going from
55 * r/o to r/w or vice versa.
56 */
57 WARN_ON(!rwsem_is_locked(&sb->s_umount));
58
59 /*
60 * No point in syncing out anything if the filesystem is read-only.
61 */
62 if (sb_rdonly(sb))
63 return 0;
64
65 ret = __sync_filesystem(sb, 0);
66 if (ret < 0)
67 return ret;
68 return __sync_filesystem(sb, 1);
69 }
70 EXPORT_SYMBOL(sync_filesystem);
71
72 static void sync_inodes_one_sb(struct super_block *sb, void *arg)
73 {
74 if (!sb_rdonly(sb))
75 sync_inodes_sb(sb);
76 }
77
78 static void sync_fs_one_sb(struct super_block *sb, void *arg)
79 {
80 if (!sb_rdonly(sb) && sb->s_op->sync_fs)
81 sb->s_op->sync_fs(sb, *(int *)arg);
82 }
83
84 static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
85 {
86 filemap_fdatawrite(bdev->bd_inode->i_mapping);
87 }
88
89 static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
90 {
91 /*
92 * We keep the error status of individual mapping so that
93 * applications can catch the writeback error using fsync(2).
94 * See filemap_fdatawait_keep_errors() for details.
95 */
96 filemap_fdatawait_keep_errors(bdev->bd_inode->i_mapping);
97 }
98
99 /*
100 * Sync everything. We start by waking flusher threads so that most of
101 * writeback runs on all devices in parallel. Then we sync all inodes reliably
102 * which effectively also waits for all flusher threads to finish doing
103 * writeback. At this point all data is on disk so metadata should be stable
104 * and we tell filesystems to sync their metadata via ->sync_fs() calls.
105 * Finally, we writeout all block devices because some filesystems (e.g. ext2)
106 * just write metadata (such as inodes or bitmaps) to block device page cache
107 * and do not sync it on their own in ->sync_fs().
108 */
109 SYSCALL_DEFINE0(sync)
110 {
111 int nowait = 0, wait = 1;
112
113 wakeup_flusher_threads(WB_REASON_SYNC);
114 iterate_supers(sync_inodes_one_sb, NULL);
115 iterate_supers(sync_fs_one_sb, &nowait);
116 iterate_supers(sync_fs_one_sb, &wait);
117 iterate_bdevs(fdatawrite_one_bdev, NULL);
118 iterate_bdevs(fdatawait_one_bdev, NULL);
119 if (unlikely(laptop_mode))
120 laptop_sync_completion();
121 return 0;
122 }
123
124 static void do_sync_work(struct work_struct *work)
125 {
126 int nowait = 0;
127
128 /*
129 * Sync twice to reduce the possibility we skipped some inodes / pages
130 * because they were temporarily locked
131 */
132 iterate_supers(sync_inodes_one_sb, &nowait);
133 iterate_supers(sync_fs_one_sb, &nowait);
134 iterate_bdevs(fdatawrite_one_bdev, NULL);
135 iterate_supers(sync_inodes_one_sb, &nowait);
136 iterate_supers(sync_fs_one_sb, &nowait);
137 iterate_bdevs(fdatawrite_one_bdev, NULL);
138 printk("Emergency Sync complete\n");
139 kfree(work);
140 }
141
142 void emergency_sync(void)
143 {
144 struct work_struct *work;
145
146 work = kmalloc(sizeof(*work), GFP_ATOMIC);
147 if (work) {
148 INIT_WORK(work, do_sync_work);
149 schedule_work(work);
150 }
151 }
152
153 /*
154 * sync a single super
155 */
156 SYSCALL_DEFINE1(syncfs, int, fd)
157 {
158 struct fd f = fdget(fd);
159 struct super_block *sb;
160 int ret;
161
162 if (!f.file)
163 return -EBADF;
164 sb = f.file->f_path.dentry->d_sb;
165
166 down_read(&sb->s_umount);
167 ret = sync_filesystem(sb);
168 up_read(&sb->s_umount);
169
170 fdput(f);
171 return ret;
172 }
173
174 /**
175 * vfs_fsync_range - helper to sync a range of data & metadata to disk
176 * @file: file to sync
177 * @start: offset in bytes of the beginning of data range to sync
178 * @end: offset in bytes of the end of data range (inclusive)
179 * @datasync: perform only datasync
180 *
181 * Write back data in range @start..@end and metadata for @file to disk. If
182 * @datasync is set only metadata needed to access modified file data is
183 * written.
184 */
185 int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
186 {
187 struct inode *inode = file->f_mapping->host;
188
189 if (!file->f_op->fsync)
190 return -EINVAL;
191 if (!datasync && (inode->i_state & I_DIRTY_TIME)) {
192 spin_lock(&inode->i_lock);
193 inode->i_state &= ~I_DIRTY_TIME;
194 spin_unlock(&inode->i_lock);
195 mark_inode_dirty_sync(inode);
196 }
197 return file->f_op->fsync(file, start, end, datasync);
198 }
199 EXPORT_SYMBOL(vfs_fsync_range);
200
201 /**
202 * vfs_fsync - perform a fsync or fdatasync on a file
203 * @file: file to sync
204 * @datasync: only perform a fdatasync operation
205 *
206 * Write back data and metadata for @file to disk. If @datasync is
207 * set only metadata needed to access modified file data is written.
208 */
209 int vfs_fsync(struct file *file, int datasync)
210 {
211 return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
212 }
213 EXPORT_SYMBOL(vfs_fsync);
214
215 static int do_fsync(unsigned int fd, int datasync)
216 {
217 struct fd f = fdget(fd);
218 int ret = -EBADF;
219
220 if (f.file) {
221 ret = vfs_fsync(f.file, datasync);
222 fdput(f);
223 }
224 return ret;
225 }
226
227 SYSCALL_DEFINE1(fsync, unsigned int, fd)
228 {
229 return do_fsync(fd, 0);
230 }
231
232 SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
233 {
234 return do_fsync(fd, 1);
235 }
236
237 /*
238 * sys_sync_file_range() permits finely controlled syncing over a segment of
239 * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
240 * zero then sys_sync_file_range() will operate from offset out to EOF.
241 *
242 * The flag bits are:
243 *
244 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
245 * before performing the write.
246 *
247 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
248 * range which are not presently under writeback. Note that this may block for
249 * significant periods due to exhaustion of disk request structures.
250 *
251 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
252 * after performing the write.
253 *
254 * Useful combinations of the flag bits are:
255 *
256 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
257 * in the range which were dirty on entry to sys_sync_file_range() are placed
258 * under writeout. This is a start-write-for-data-integrity operation.
259 *
260 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
261 * are not presently under writeout. This is an asynchronous flush-to-disk
262 * operation. Not suitable for data integrity operations.
263 *
264 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
265 * completion of writeout of all pages in the range. This will be used after an
266 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
267 * for that operation to complete and to return the result.
268 *
269 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
270 * a traditional sync() operation. This is a write-for-data-integrity operation
271 * which will ensure that all pages in the range which were dirty on entry to
272 * sys_sync_file_range() are committed to disk.
273 *
274 *
275 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
276 * I/O errors or ENOSPC conditions and will return those to the caller, after
277 * clearing the EIO and ENOSPC flags in the address_space.
278 *
279 * It should be noted that none of these operations write out the file's
280 * metadata. So unless the application is strictly performing overwrites of
281 * already-instantiated disk blocks, there are no guarantees here that the data
282 * will be available after a crash.
283 */
284 SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
285 unsigned int, flags)
286 {
287 int ret;
288 struct fd f;
289 struct address_space *mapping;
290 loff_t endbyte; /* inclusive */
291 umode_t i_mode;
292
293 ret = -EINVAL;
294 if (flags & ~VALID_FLAGS)
295 goto out;
296
297 endbyte = offset + nbytes;
298
299 if ((s64)offset < 0)
300 goto out;
301 if ((s64)endbyte < 0)
302 goto out;
303 if (endbyte < offset)
304 goto out;
305
306 if (sizeof(pgoff_t) == 4) {
307 if (offset >= (0x100000000ULL << PAGE_SHIFT)) {
308 /*
309 * The range starts outside a 32 bit machine's
310 * pagecache addressing capabilities. Let it "succeed"
311 */
312 ret = 0;
313 goto out;
314 }
315 if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) {
316 /*
317 * Out to EOF
318 */
319 nbytes = 0;
320 }
321 }
322
323 if (nbytes == 0)
324 endbyte = LLONG_MAX;
325 else
326 endbyte--; /* inclusive */
327
328 ret = -EBADF;
329 f = fdget(fd);
330 if (!f.file)
331 goto out;
332
333 i_mode = file_inode(f.file)->i_mode;
334 ret = -ESPIPE;
335 if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
336 !S_ISLNK(i_mode))
337 goto out_put;
338
339 mapping = f.file->f_mapping;
340 ret = 0;
341 if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
342 ret = file_fdatawait_range(f.file, offset, endbyte);
343 if (ret < 0)
344 goto out_put;
345 }
346
347 if (flags & SYNC_FILE_RANGE_WRITE) {
348 ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
349 WB_SYNC_NONE);
350 if (ret < 0)
351 goto out_put;
352 }
353
354 if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
355 ret = file_fdatawait_range(f.file, offset, endbyte);
356
357 out_put:
358 fdput(f);
359 out:
360 return ret;
361 }
362
363 /* It would be nice if people remember that not all the world's an i386
364 when they introduce new system calls */
365 SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
366 loff_t, offset, loff_t, nbytes)
367 {
368 return sys_sync_file_range(fd, offset, nbytes, flags);
369 }