]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - include/drm/drm_encoder.h
ptp: fix the race between the release of ptp_clock and cdev
[mirror_ubuntu-bionic-kernel.git] / include / drm / drm_encoder.h
1 /*
2 * Copyright (c) 2016 Intel Corporation
3 *
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
13 *
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
21 */
22
23 #ifndef __DRM_ENCODER_H__
24 #define __DRM_ENCODER_H__
25
26 #include <linux/list.h>
27 #include <linux/ctype.h>
28 #include <drm/drm_crtc.h>
29 #include <drm/drm_mode.h>
30 #include <drm/drm_mode_object.h>
31
32 struct drm_encoder;
33
34 /**
35 * struct drm_encoder_funcs - encoder controls
36 *
37 * Encoders sit between CRTCs and connectors.
38 */
39 struct drm_encoder_funcs {
40 /**
41 * @reset:
42 *
43 * Reset encoder hardware and software state to off. This function isn't
44 * called by the core directly, only through drm_mode_config_reset().
45 * It's not a helper hook only for historical reasons.
46 */
47 void (*reset)(struct drm_encoder *encoder);
48
49 /**
50 * @destroy:
51 *
52 * Clean up encoder resources. This is only called at driver unload time
53 * through drm_mode_config_cleanup() since an encoder cannot be
54 * hotplugged in DRM.
55 */
56 void (*destroy)(struct drm_encoder *encoder);
57
58 /**
59 * @late_register:
60 *
61 * This optional hook can be used to register additional userspace
62 * interfaces attached to the encoder like debugfs interfaces.
63 * It is called late in the driver load sequence from drm_dev_register().
64 * Everything added from this callback should be unregistered in
65 * the early_unregister callback.
66 *
67 * Returns:
68 *
69 * 0 on success, or a negative error code on failure.
70 */
71 int (*late_register)(struct drm_encoder *encoder);
72
73 /**
74 * @early_unregister:
75 *
76 * This optional hook should be used to unregister the additional
77 * userspace interfaces attached to the encoder from
78 * @late_register. It is called from drm_dev_unregister(),
79 * early in the driver unload sequence to disable userspace access
80 * before data structures are torndown.
81 */
82 void (*early_unregister)(struct drm_encoder *encoder);
83 };
84
85 /**
86 * struct drm_encoder - central DRM encoder structure
87 * @dev: parent DRM device
88 * @head: list management
89 * @base: base KMS object
90 * @name: human readable name, can be overwritten by the driver
91 * @crtc: currently bound CRTC
92 * @bridge: bridge associated to the encoder
93 * @funcs: control functions
94 * @helper_private: mid-layer private data
95 *
96 * CRTCs drive pixels to encoders, which convert them into signals
97 * appropriate for a given connector or set of connectors.
98 */
99 struct drm_encoder {
100 struct drm_device *dev;
101 struct list_head head;
102
103 struct drm_mode_object base;
104 char *name;
105 /**
106 * @encoder_type:
107 *
108 * One of the DRM_MODE_ENCODER_<foo> types in drm_mode.h. The following
109 * encoder types are defined thus far:
110 *
111 * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A.
112 *
113 * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort.
114 *
115 * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel
116 * with a proprietary parallel connector.
117 *
118 * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video,
119 * Component, SCART).
120 *
121 * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays
122 *
123 * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus.
124 *
125 * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel
126 * bus.
127 *
128 * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow
129 * mutliple DP MST streams to share one physical encoder.
130 */
131 int encoder_type;
132
133 /**
134 * @index: Position inside the mode_config.list, can be used as an array
135 * index. It is invariant over the lifetime of the encoder.
136 */
137 unsigned index;
138
139 /**
140 * @possible_crtcs: Bitmask of potential CRTC bindings, using
141 * drm_crtc_index() as the index into the bitfield. The driver must set
142 * the bits for all &drm_crtc objects this encoder can be connected to
143 * before calling drm_encoder_init().
144 *
145 * In reality almost every driver gets this wrong.
146 *
147 * Note that since CRTC objects can't be hotplugged the assigned indices
148 * are stable and hence known before registering all objects.
149 */
150 uint32_t possible_crtcs;
151
152 /**
153 * @possible_clones: Bitmask of potential sibling encoders for cloning,
154 * using drm_encoder_index() as the index into the bitfield. The driver
155 * must set the bits for all &drm_encoder objects which can clone a
156 * &drm_crtc together with this encoder before calling
157 * drm_encoder_init(). Drivers should set the bit representing the
158 * encoder itself, too. Cloning bits should be set such that when two
159 * encoders can be used in a cloned configuration, they both should have
160 * each another bits set.
161 *
162 * In reality almost every driver gets this wrong.
163 *
164 * Note that since encoder objects can't be hotplugged the assigned indices
165 * are stable and hence known before registering all objects.
166 */
167 uint32_t possible_clones;
168
169 struct drm_crtc *crtc;
170 struct drm_bridge *bridge;
171 const struct drm_encoder_funcs *funcs;
172 const struct drm_encoder_helper_funcs *helper_private;
173 };
174
175 #define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
176
177 __printf(5, 6)
178 int drm_encoder_init(struct drm_device *dev,
179 struct drm_encoder *encoder,
180 const struct drm_encoder_funcs *funcs,
181 int encoder_type, const char *name, ...);
182
183 /**
184 * drm_encoder_index - find the index of a registered encoder
185 * @encoder: encoder to find index for
186 *
187 * Given a registered encoder, return the index of that encoder within a DRM
188 * device's list of encoders.
189 */
190 static inline unsigned int drm_encoder_index(struct drm_encoder *encoder)
191 {
192 return encoder->index;
193 }
194
195 /**
196 * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
197 * @encoder: encoder to test
198 * @crtc: crtc to test
199 *
200 * Returns false if @encoder can't be driven by @crtc, true otherwise.
201 */
202 static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
203 struct drm_crtc *crtc)
204 {
205 return !!(encoder->possible_crtcs & drm_crtc_mask(crtc));
206 }
207
208 /**
209 * drm_encoder_find - find a &drm_encoder
210 * @dev: DRM device
211 * @file_priv: drm file to check for lease against.
212 * @id: encoder id
213 *
214 * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around
215 * drm_mode_object_find().
216 */
217 static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev,
218 struct drm_file *file_priv,
219 uint32_t id)
220 {
221 struct drm_mode_object *mo;
222
223 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_ENCODER);
224
225 return mo ? obj_to_encoder(mo) : NULL;
226 }
227
228 void drm_encoder_cleanup(struct drm_encoder *encoder);
229
230 /**
231 * drm_for_each_encoder_mask - iterate over encoders specified by bitmask
232 * @encoder: the loop cursor
233 * @dev: the DRM device
234 * @encoder_mask: bitmask of encoder indices
235 *
236 * Iterate over all encoders specified by bitmask.
237 */
238 #define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \
239 list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \
240 for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder)))
241
242 /**
243 * drm_for_each_encoder - iterate over all encoders
244 * @encoder: the loop cursor
245 * @dev: the DRM device
246 *
247 * Iterate over all encoders of @dev.
248 */
249 #define drm_for_each_encoder(encoder, dev) \
250 list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head)
251
252 #endif