]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/commitdiff
drm: use seqlock for vblank time/count
authorMatthew Auld <matthew.auld@intel.com>
Tue, 10 May 2016 14:21:28 +0000 (15:21 +0100)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Tue, 24 May 2016 21:21:56 +0000 (23:21 +0200)
This patch aims to replace the roll-your-own seqlock implementation with
full-blown seqlock'. We also remove the timestamp ring-buffer in favour
of single timestamp/count pair protected by a seqlock. In turn this
means we can now increment the vblank freely without the need for
clamping.

v2:
  - reduce the scope of the seqlock, keeping vblank_time_lock
  - make the seqlock per vblank_crtc, so multiple readers aren't blocked by
    the writer

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1462890088-18194-1-git-send-email-matthew.auld@intel.com
drivers/gpu/drm/drm_irq.c
include/drm/drmP.h

index 0fac801c18fe941f7114ed141a336e92f90108c2..66e5c1e412d318ef2fb6e4339e0ddd8f8972d06c 100644 (file)
 #include <linux/vgaarb.h>
 #include <linux/export.h>
 
-/* Access macro for slots in vblank timestamp ringbuffer. */
-#define vblanktimestamp(dev, pipe, count) \
-       ((dev)->vblank[pipe].time[(count) % DRM_VBLANKTIME_RBSIZE])
-
 /* Retry timestamp calculation up to 3 times to satisfy
  * drm_timestamp_precision before giving up.
  */
@@ -82,29 +78,15 @@ static void store_vblank(struct drm_device *dev, unsigned int pipe,
                         struct timeval *t_vblank, u32 last)
 {
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
-       u32 tslot;
 
        assert_spin_locked(&dev->vblank_time_lock);
 
        vblank->last = last;
 
-       /* All writers hold the spinlock, but readers are serialized by
-        * the latching of vblank->count below.
-        */
-       tslot = vblank->count + vblank_count_inc;
-       vblanktimestamp(dev, pipe, tslot) = *t_vblank;
-
-       /*
-        * vblank timestamp updates are protected on the write side with
-        * vblank_time_lock, but on the read side done locklessly using a
-        * sequence-lock on the vblank counter. Ensure correct ordering using
-        * memory barrriers. We need the barrier both before and also after the
-        * counter update to synchronize with the next timestamp write.
-        * The read-side barriers for this are in drm_vblank_count_and_time.
-        */
-       smp_wmb();
+       write_seqlock(&vblank->seqlock);
+       vblank->time = *t_vblank;
        vblank->count += vblank_count_inc;
-       smp_wmb();
+       write_sequnlock(&vblank->seqlock);
 }
 
 /**
@@ -205,7 +187,7 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
                const struct timeval *t_old;
                u64 diff_ns;
 
-               t_old = &vblanktimestamp(dev, pipe, vblank->count);
+               t_old = &vblank->time;
                diff_ns = timeval_to_ns(&t_vblank) - timeval_to_ns(t_old);
 
                /*
@@ -239,49 +221,6 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
                diff = 1;
        }
 
-       /*
-        * FIMXE: Need to replace this hack with proper seqlocks.
-        *
-        * Restrict the bump of the software vblank counter to a safe maximum
-        * value of +1 whenever there is the possibility that concurrent readers
-        * of vblank timestamps could be active at the moment, as the current
-        * implementation of the timestamp caching and updating is not safe
-        * against concurrent readers for calls to store_vblank() with a bump
-        * of anything but +1. A bump != 1 would very likely return corrupted
-        * timestamps to userspace, because the same slot in the cache could
-        * be concurrently written by store_vblank() and read by one of those
-        * readers without the read-retry logic detecting the collision.
-        *
-        * Concurrent readers can exist when we are called from the
-        * drm_vblank_off() or drm_vblank_on() functions and other non-vblank-
-        * irq callers. However, all those calls to us are happening with the
-        * vbl_lock locked to prevent drm_vblank_get(), so the vblank refcount
-        * can't increase while we are executing. Therefore a zero refcount at
-        * this point is safe for arbitrary counter bumps if we are called
-        * outside vblank irq, a non-zero count is not 100% safe. Unfortunately
-        * we must also accept a refcount of 1, as whenever we are called from
-        * drm_vblank_get() -> drm_vblank_enable() the refcount will be 1 and
-        * we must let that one pass through in order to not lose vblank counts
-        * during vblank irq off - which would completely defeat the whole
-        * point of this routine.
-        *
-        * Whenever we are called from vblank irq, we have to assume concurrent
-        * readers exist or can show up any time during our execution, even if
-        * the refcount is currently zero, as vblank irqs are usually only
-        * enabled due to the presence of readers, and because when we are called
-        * from vblank irq we can't hold the vbl_lock to protect us from sudden
-        * bumps in vblank refcount. Therefore also restrict bumps to +1 when
-        * called from vblank irq.
-        */
-       if ((diff > 1) && (atomic_read(&vblank->refcount) > 1 ||
-           (flags & DRM_CALLED_FROM_VBLIRQ))) {
-               DRM_DEBUG_VBL("clamping vblank bump to 1 on crtc %u: diffr=%u "
-                             "refcount %u, vblirq %u\n", pipe, diff,
-                             atomic_read(&vblank->refcount),
-                             (flags & DRM_CALLED_FROM_VBLIRQ) != 0);
-               diff = 1;
-       }
-
        DRM_DEBUG_VBL("updating vblank count on crtc %u:"
                      " current=%u, diff=%u, hw=%u hw_last=%u\n",
                      pipe, vblank->count, diff, cur_vblank, vblank->last);
@@ -417,6 +356,7 @@ int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs)
                init_waitqueue_head(&vblank->queue);
                setup_timer(&vblank->disable_timer, vblank_disable_fn,
                            (unsigned long)vblank);
+               seqlock_init(&vblank->seqlock);
        }
 
        DRM_INFO("Supports vblank timestamp caching Rev 2 (21.10.2013).\n");
@@ -986,25 +926,19 @@ u32 drm_vblank_count_and_time(struct drm_device *dev, unsigned int pipe,
                              struct timeval *vblanktime)
 {
        struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
-       int count = DRM_TIMESTAMP_MAXRETRIES;
-       u32 cur_vblank;
+       u32 vblank_count;
+       unsigned int seq;
 
        if (WARN_ON(pipe >= dev->num_crtcs))
                return 0;
 
-       /*
-        * Vblank timestamps are read lockless. To ensure consistency the vblank
-        * counter is rechecked and ordering is ensured using memory barriers.
-        * This works like a seqlock. The write-side barriers are in store_vblank.
-        */
        do {
-               cur_vblank = vblank->count;
-               smp_rmb();
-               *vblanktime = vblanktimestamp(dev, pipe, cur_vblank);
-               smp_rmb();
-       } while (cur_vblank != vblank->count && --count > 0);
+               seq = read_seqbegin(&vblank->seqlock);
+               vblank_count = vblank->count;
+               *vblanktime = vblank->time;
+       } while (read_seqretry(&vblank->seqlock, seq));
 
-       return cur_vblank;
+       return vblank_count;
 }
 EXPORT_SYMBOL(drm_vblank_count_and_time);
 
index 84f1a8eefbdbc8ae89925aff3dafaaccdf99b4b4..af8b71b2e5bda1a087a29842d2ac337aacaa9d8d 100644 (file)
@@ -52,6 +52,7 @@
 #include <linux/poll.h>
 #include <linux/ratelimit.h>
 #include <linux/sched.h>
+#include <linux/seqlock.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/vmalloc.h>
@@ -392,11 +393,6 @@ struct drm_master {
        void *driver_priv;
 };
 
-/* Size of ringbuffer for vblank timestamps. Just double-buffer
- * in initial implementation.
- */
-#define DRM_VBLANKTIME_RBSIZE 2
-
 /* Flags and return codes for get_vblank_timestamp() driver function. */
 #define DRM_CALLED_FROM_VBLIRQ 1
 #define DRM_VBLANKTIME_SCANOUTPOS_METHOD (1 << 0)
@@ -725,10 +721,10 @@ struct drm_vblank_crtc {
        wait_queue_head_t queue;        /**< VBLANK wait queue */
        struct timer_list disable_timer;                /* delayed disable timer */
 
-       /* vblank counter, protected by dev->vblank_time_lock for writes */
-       u32 count;
-       /* vblank timestamps, protected by dev->vblank_time_lock for writes */
-       struct timeval time[DRM_VBLANKTIME_RBSIZE];
+       seqlock_t seqlock;              /* protects vblank count and time */
+
+       u32 count;                      /* vblank counter */
+       struct timeval time;            /* vblank timestamp */
 
        atomic_t refcount;              /* number of users of vblank interruptsper crtc */
        u32 last;                       /* protected by dev->vbl_lock, used */