ARM64: dts: meson-gxm: add GXM specific USB host configuration

BugLink: http://bugs.launchpad.net/bugs/1794889
[ Upstream commit 458baa95c86406c81c6ebac0a98d1689075a3ec4 ]

The USB configuration on GXM is slightly different than on GXL. The dwc3
controller's internal hub has three USB2 ports (instead of 2 on GXL)
along with a dedicated USB2 PHY for this port. However, it seems that
there are no pins on GXM which would allow connecting the third port to
a physical USB port.
Passing the third PHY is required though, because without it none of the
other USB ports is working (this seems to be a limitation of how the
internal USB hub works, if one PHY is disabled then no USB port works).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 19a798d2ae2fdd61a2c3e708dea2b1d59f71e061..fc53ed7afc11fb6a651c99abc348ba2ac39ab019 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -117,6 +117,19 @@
        };
 };
 
+&apb {
+       usb2_phy2: phy@78040 {
+               compatible = "amlogic,meson-gxl-usb2-phy";
+               #phy-cells = <0>;
+               reg = <0x0 0x78040 0x0 0x20>;
+               clocks = <&clkc CLKID_USB>;
+               clock-names = "phy";
+               resets = <&reset RESET_USB_OTG>;
+               reset-names = "phy";
+               status = "okay";
+       };
+};
+
 &clkc_AO {
        compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
 };
@@ -137,3 +150,7 @@
 &hdmi_tx {
        compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
 };
+
+&dwc3 {
+       phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+};