arch/arm/boot/dts/am57xx-cl-som-am57x.dts

   1 /*
   2  * Support for CompuLab CL-SOM-AM57x System-on-Module
   3  *
   4  * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
   5  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License version 2 as published by
   9  * the Free Software Foundation.
  10  */
  11
  12 /dts-v1/;
  13
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include "dra74x.dtsi"
  17
  18 / {
  19         model = "CompuLab CL-SOM-AM57x";
  20         compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29                 pinctrl-names = "default";
  30                 pinctrl-0 = <&leds_pins_default>;
  31
  32                 led@0 {
  33                         label = "cl-som-am57x:green";
  34                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
  35                         linux,default-trigger = "heartbeat";
  36                         default-state = "off";
  37                 };
  38         };
  39
  40         vdd_3v3: fixedregulator-vdd_3v3 {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "vdd_3v3";
  43                 regulator-min-microvolt = <3300000>;
  44                 regulator-max-microvolt = <3300000>;
  45         };
  46
  47         ads7846reg: fixedregulator-ads7846-reg {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "ads7846-reg";
  50                 regulator-min-microvolt = <3300000>;
  51                 regulator-max-microvolt = <3300000>;
  52         };
  53
  54         sound0: sound@0 {
  55                 compatible = "simple-audio-card";
  56                 simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
  57                 simple-audio-card,format = "i2s";
  58                 simple-audio-card,bitclock-master = <&dailink0_master>;
  59                 simple-audio-card,frame-master = <&dailink0_master>;
  60                 simple-audio-card,widgets =
  61                                         "Headphone", "Headphone Jack",
  62                                         "Microphone", "Microphone Jack",
  63                                         "Line", "Line Jack";
  64                 simple-audio-card,routing =
  65                                         "Headphone Jack", "RHPOUT",
  66                                         "Headphone Jack", "LHPOUT",
  67                                         "LLINEIN", "Line Jack",
  68                                         "MICIN", "Mic Bias",
  69                                         "Mic Bias", "Microphone Jack";
  70
  71                 dailink0_master: simple-audio-card,cpu {
  72                         sound-dai = <&mcasp3>;
  73                 };
  74
  75                 simple-audio-card,codec {
  76                         sound-dai = <&wm8731>;
  77                         system-clock-frequency = <12000000>;
  78                 };
  79         };
  80 };
  81
  82 &dra7_pmx_core {
  83         leds_pins_default: leds_pins_default {
  84                 pinctrl-single,pins = <
  85                         DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)      /* gpmc_a15.gpio2_5 */
  86                 >;
  87         };
  88
  89         i2c1_pins_default: i2c1_pins_default {
  90                 pinctrl-single,pins = <
  91                         DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
  92                         DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
  93                 >;
  94         };
  95
  96         i2c3_pins_default: i2c3_pins_default {
  97                 pinctrl-single,pins = <
  98                         DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)        /* mcasp1_aclkx.i2c3_sda */
  99                         DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)        /* mcasp1_fsx.i2c3_scl */
 100                 >;
 101         };
 102
 103         i2c4_pins_default: i2c4_pins_default {
 104                 pinctrl-single,pins = <
 105                         DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)        /* mcasp1_acl.i2c4_sda */
 106                         DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)        /* mcasp1_fsr.i2c4_scl */
 107                 >;
 108         };
 109
 110         tps659038_pins_default: tps659038_pins_default {
 111                 pinctrl-single,pins = <
 112                         DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
 113                 >;
 114         };
 115
 116         mmc2_pins_default: mmc2_pins_default {
 117                 pinctrl-single,pins = <
 118                         DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 119                         DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 120                         DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 121                         DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 122                         DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 123                         DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 124                         DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 125                         DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 126                         DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 127                         DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 128                 >;
 129         };
 130
 131         qspi1_pins: pinmux_qspi1_pins {
 132                 pinctrl-single,pins = <
 133                         DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)        /* gpmc_a13.qspi1_rtclk */
 134                         DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)        /* gpmc_a16.qspi1_d0 */
 135                         DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)        /* gpmc_a17.qspi1_d1 */
 136                         DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)        /* qpmc_a18.qspi1_sclk */
 137                         DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
 138                         DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
 139                 >;
 140         };
 141
 142         cpsw_pins_default: cpsw_pins_default {
 143                 pinctrl-single,pins = <
 144                         /* Slave at addr 0x0 */
 145                         DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_tclk */
 146                         DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_tctl */
 147                         DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td3 */
 148                         DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td2 */
 149                         DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td1 */
 150                         DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td0 */
 151                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
 152                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
 153                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
 154                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
 155                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
 156                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
 157
 158                         /* Slave at addr 0x1 */
 159                         DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d12.rgmii1_tclk */
 160                         DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d13.rgmii1_tctl */
 161                         DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d14.rgmii1_td3 */
 162                         DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d15.rgmii1_td2 */
 163                         DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d16.rgmii1_td1 */
 164                         DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d17.rgmii1_td0 */
 165                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
 166                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
 167                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
 168                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
 169                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
 170                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
 171                 >;
 172         };
 173
 174         cpsw_pins_sleep: cpsw_pins_sleep {
 175                 pinctrl-single,pins = <
 176                         /* Slave 1 */
 177                         DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
 178                         DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
 179                         DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
 180                         DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
 181                         DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
 182                         DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
 183                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
 184                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
 185                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
 186                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
 187                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
 188                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
 189
 190                         /* Slave 2 */
 191                         DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
 192                         DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
 193                         DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
 194                         DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
 195                         DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
 196                         DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
 197                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
 198                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
 199                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
 200                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
 201                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
 202                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
 203                 >;
 204         };
 205
 206         davinci_mdio_pins_default: davinci_mdio_pins_default {
 207                 pinctrl-single,pins = <
 208                         /* MDIO */
 209                         DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
 210                         DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */
 211                 >;
 212         };
 213
 214         davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 215                 pinctrl-single,pins = <
 216                         DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
 217                         DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
 218                 >;
 219         };
 220
 221         ads7846_pins: pinmux_ads7846_pins {
 222                 pinctrl-single,pins = <
 223                         DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
 224                 >;
 225         };
 226
 227         mcasp3_pins_default: mcasp3_pins_default {
 228                 pinctrl-single,pins = <
 229                         DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
 230                         DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
 231                         DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
 232                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
 233                 >;
 234         };
 235
 236         mcasp3_pins_sleep: mcasp3_pins_sleep {
 237                 pinctrl-single,pins = <
 238                         DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
 239                         DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
 240                         DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
 241                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
 242                 >;
 243         };
 244 };
 245
 246 &i2c1 {
 247         status = "okay";
 248         pinctrl-names = "default";
 249         pinctrl-0 = <&i2c1_pins_default>;
 250         clock-frequency = <400000>;
 251 };
 252
 253 &i2c3 {
 254         status = "okay";
 255         pinctrl-names = "default";
 256         pinctrl-0 = <&i2c3_pins_default>;
 257         clock-frequency = <400000>;
 258 };
 259
 260 &i2c4 {
 261         status = "okay";
 262         pinctrl-names = "default";
 263         pinctrl-0 = <&i2c4_pins_default>;
 264         clock-frequency = <400000>;
 265
 266         tps659038: tps659038@58 {
 267                 compatible = "ti,tps659038";
 268                 reg = <0x58>;
 269                 interrupt-parent = <&gpio1>;
 270                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 271
 272                 pinctrl-names = "default";
 273                 pinctrl-0 = <&tps659038_pins_default>;
 274
 275                 #interrupt-cells = <2>;
 276                 interrupt-controller;
 277
 278                 ti,system-power-controller;
 279
 280                 tps659038_pmic {
 281                         compatible = "ti,tps659038-pmic";
 282
 283                         regulators {
 284                                 smps12_reg: smps12 {
 285                                         /* VDD_MPU */
 286                                         regulator-name = "smps12";
 287                                         regulator-min-microvolt = < 850000>;
 288                                         regulator-max-microvolt = <1250000>;
 289                                         regulator-always-on;
 290                                         regulator-boot-on;
 291                                 };
 292
 293                                 smps3_reg: smps3 {
 294                                         /* VDD_DDR */
 295                                         regulator-name = "smps3";
 296                                         regulator-min-microvolt = <1500000>;
 297                                         regulator-max-microvolt = <1500000>;
 298                                         regulator-always-on;
 299                                         regulator-boot-on;
 300                                 };
 301
 302                                 smps45_reg: smps45 {
 303                                         /* VDD_DSPEVE */
 304                                         regulator-name = "smps45";
 305                                         regulator-min-microvolt = < 850000>;
 306                                         regulator-max-microvolt = <1250000>;
 307                                         regulator-always-on;
 308                                         regulator-boot-on;
 309                                 };
 310
 311                                 smps6_reg: smps6 {
 312                                         /* VDD_GPU */
 313                                         regulator-name = "smps6";
 314                                         regulator-min-microvolt = < 850000>;
 315                                         regulator-max-microvolt = <1250000>;
 316                                         regulator-always-on;
 317                                         regulator-boot-on;
 318                                 };
 319
 320                                 smps7_reg: smps7 {
 321                                         /* VDD_CORE */
 322                                         regulator-name = "smps7";
 323                                         regulator-min-microvolt = < 850000>;
 324                                         regulator-max-microvolt = <1160000>;
 325                                         regulator-always-on;
 326                                         regulator-boot-on;
 327                                 };
 328
 329                                 smps8_reg: smps8 {
 330                                         /* VDD_IVA */
 331                                         regulator-name = "smps8";
 332                                         regulator-min-microvolt = < 850000>;
 333                                         regulator-max-microvolt = <1250000>;
 334                                         regulator-always-on;
 335                                         regulator-boot-on;
 336                                 };
 337
 338                                 smps9_reg: smps9 {
 339                                         /* PMIC_3V3 */
 340                                         regulator-name = "smps9";
 341                                         regulator-min-microvolt = <3300000>;
 342                                         regulator-max-microvolt = <3300000>;
 343                                         regulator-always-on;
 344                                         regulator-boot-on;
 345                                 };
 346
 347
 348                                 ldo1_reg: ldo1 {
 349                                         /* VDD_SD / VDDSHV8  */
 350                                         regulator-name = "ldo1";
 351                                         regulator-min-microvolt = <1800000>;
 352                                         regulator-max-microvolt = <3300000>;
 353                                         regulator-boot-on;
 354                                         regulator-always-on;
 355                                 };
 356
 357                                 ldo2_reg: ldo2 {
 358                                         /* VDD_1V8 */
 359                                         regulator-name = "ldo2";
 360                                         regulator-min-microvolt = <1800000>;
 361                                         regulator-max-microvolt = <1800000>;
 362                                         regulator-always-on;
 363                                         regulator-boot-on;
 364                                 };
 365
 366                                 ldo3_reg: ldo3 {
 367                                         /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
 368                                         regulator-name = "ldo3";
 369                                         regulator-min-microvolt = <1800000>;
 370                                         regulator-max-microvolt = <1800000>;
 371                                         regulator-always-on;
 372                                         regulator-boot-on;
 373                                 };
 374
 375                                 ldo4_reg: ldo4 {
 376                                         /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
 377                                         regulator-name = "ldo4";
 378                                         regulator-min-microvolt = <1800000>;
 379                                         regulator-max-microvolt = <1800000>;
 380                                         regulator-always-on;
 381                                         regulator-boot-on;
 382                                 };
 383
 384                                 ldo9_reg: ldo9 {
 385                                         /* VDD_RTC */
 386                                         regulator-name = "ldo9";
 387                                         regulator-min-microvolt = <1050000>;
 388                                         regulator-max-microvolt = <1050000>;
 389                                         regulator-always-on;
 390                                         regulator-boot-on;
 391                                 };
 392
 393                                 ldoln_reg: ldoln {
 394                                         /* VDDA_1V8_PLL */
 395                                         regulator-name = "ldoln";
 396                                         regulator-min-microvolt = <1800000>;
 397                                         regulator-max-microvolt = <1800000>;
 398                                         regulator-always-on;
 399                                         regulator-boot-on;
 400                                 };
 401
 402                                 ldousb_reg: ldousb {
 403                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 404                                         regulator-name = "ldousb";
 405                                         regulator-min-microvolt = <3300000>;
 406                                         regulator-max-microvolt = <3300000>;
 407                                         regulator-always-on;
 408                                         regulator-boot-on;
 409                                 };
 410
 411                                 /* regen1 not used */
 412                         };
 413                 };
 414
 415                 tps659038_pwr_button: tps659038_pwr_button {
 416                         compatible = "ti,palmas-pwrbutton";
 417                         interrupt-parent = <&tps659038>;
 418                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 419                         wakeup-source;
 420                         ti,palmas-long-press-seconds = <12>;
 421                 };
 422
 423                 tps659038_gpio: tps659038_gpio {
 424                         compatible = "ti,palmas-gpio";
 425                         gpio-controller;
 426                         #gpio-cells = <2>;
 427                 };
 428         };
 429
 430         rtc0: rtc@56 {
 431                 compatible = "emmicro,em3027";
 432                 reg = <0x56>;
 433         };
 434
 435         eeprom_module: atmel@50 {
 436                 compatible = "atmel,24c08";
 437                 reg = <0x50>;
 438                 pagesize = <16>;
 439         };
 440
 441         wm8731: wm8731@1a {
 442                 #sound-dai-cells = <0>;
 443                 compatible = "wlf,wm8731";
 444                 reg = <0x1a>;
 445                 status = "okay";
 446         };
 447 };
 448
 449 &cpu0 {
 450         cpu0-supply = <&smps12_reg>;
 451         voltage-tolerance = <1>;
 452 };
 453
 454 &sata {
 455         status = "okay";
 456 };
 457
 458 &mailbox5 {
 459         status = "okay";
 460         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
 461                 status = "okay";
 462         };
 463         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 464                 status = "okay";
 465         };
 466 };
 467
 468 &mailbox6 {
 469         status = "okay";
 470         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 471                 status = "okay";
 472         };
 473         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 474                 status = "okay";
 475         };
 476 };
 477
 478 &mmc2 {
 479         status = "okay";
 480
 481         pinctrl-names = "default";
 482         pinctrl-0 = <&mmc2_pins_default>;
 483
 484         vmmc-supply = <&vdd_3v3>;
 485         bus-width = <8>;
 486         ti,non-removable;
 487         cap-mmc-dual-data-rate;
 488 };
 489
 490 &qspi {
 491         status = "okay";
 492         pinctrl-names = "default";
 493         pinctrl-0 = <&qspi1_pins>;
 494
 495         spi-max-frequency = <48000000>;
 496
 497         spi_flash: spi_flash@0 {
 498                 #address-cells = <1>;
 499                 #size-cells = <1>;
 500                 compatible = "spansion,m25p80", "jedec,spi-nor";
 501                 reg = <0>;                              /* CS0 */
 502                 spi-max-frequency = <48000000>;
 503
 504                 partition@0 {
 505                         label = "uboot";
 506                         reg = <0x0 0xc0000>;
 507                 };
 508
 509                 partition@c0000 {
 510                         label = "uboot environment";
 511                         reg = <0xc0000 0x40000>;
 512                 };
 513
 514                 partition@100000 {
 515                         label = "reserved";
 516                         reg = <0x100000 0x0>;
 517                 };
 518         };
 519
 520         /* touch controller */
 521         ads7846@0 {
 522                 pinctrl-names = "default";
 523                 pinctrl-0 = <&ads7846_pins>;
 524
 525                 compatible = "ti,ads7846";
 526                 vcc-supply = <&ads7846reg>;
 527
 528                 reg = <1>;                              /* CS1 */
 529                 spi-max-frequency = <1500000>;
 530
 531                 interrupt-parent = <&gpio1>;
 532                 interrupts = <31 0>;
 533                 pendown-gpio = <&gpio1 31 0>;
 534
 535
 536                 ti,x-min = /bits/ 16 <0x0>;
 537                 ti,x-max = /bits/ 16 <0x0fff>;
 538                 ti,y-min = /bits/ 16 <0x0>;
 539                 ti,y-max = /bits/ 16 <0x0fff>;
 540
 541                 ti,x-plate-ohms = /bits/ 16 <180>;
 542                 ti,pressure-max = /bits/ 16 <255>;
 543
 544                 ti,debounce-max = /bits/ 16 <30>;
 545                 ti,debounce-tol = /bits/ 16 <10>;
 546                 ti,debounce-rep = /bits/ 16 <1>;
 547
 548                 linux,wakeup;
 549         };
 550 };
 551
 552 &mac {
 553         status = "okay";
 554         pinctrl-names = "default", "sleep";
 555         pinctrl-0 = <&cpsw_pins_default>;
 556         pinctrl-1 = <&cpsw_pins_sleep>;
 557         dual_emac;
 558 };
 559
 560 &cpsw_emac0 {
 561         phy_id = <&davinci_mdio>, <0>;
 562         phy-mode = "rgmii-txid";
 563         dual_emac_res_vlan = <0>;
 564 };
 565
 566 &cpsw_emac1 {
 567         phy_id = <&davinci_mdio>, <1>;
 568         phy-mode = "rgmii-txid";
 569         dual_emac_res_vlan = <1>;
 570 };
 571
 572 &davinci_mdio {
 573         pinctrl-names = "default", "sleep";
 574         pinctrl-0 = <&davinci_mdio_pins_default>;
 575         pinctrl-1 = <&davinci_mdio_pins_sleep>;
 576 };
 577
 578 &usb2_phy1 {
 579         phy-supply = <&ldousb_reg>;
 580 };
 581
 582 &usb2_phy2 {
 583         phy-supply = <&ldousb_reg>;
 584 };
 585
 586 &usb1 {
 587         dr_mode = "host";
 588 };
 589
 590 &usb2 {
 591         dr_mode = "host";
 592 };
 593
 594 &mcasp3 {
 595         #sound-dai-cells = <0>;
 596         pinctrl-names = "default", "sleep";
 597         pinctrl-0 = <&mcasp3_pins_default>;
 598         pinctrl-1 = <&mcasp3_pins_sleep>;
 599         status = "okay";
 600
 601         op-mode = <0>;  /* MCASP_IIS_MODE */
 602         tdm-slots = <2>;
 603         /* 4 serializers */
 604         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 605                 1 2 0 0
 606         >;
 607 };
 608
 609 &gpio3 {
 610         status = "okay";
 611         ti,no-reset-on-init;
 612 };
 613
 614 &gpio2 {
 615         status = "okay";
 616         ti,no-reset-on-init;
 617 };