-linux-raspi2 (4.10.0-1012.15) UNRELEASED; urgency=low
+linux-raspi2 (4.10.0-1012.15) zesty; urgency=low
- CHANGELOG: Do not edit directly. Autogenerated at release.
- CHANGELOG: Use the printchanges target to see the curent changes.
- CHANGELOG: Use the insertchanges target to create the final log.
+ * linux-raspi2: 4.10.0-1012.15 -proposed tracker (LP: #1704966)
- -- Kleber Sacilotto de Souza <kleber.souza@canonical.com> Wed, 19 Jul 2017 15:38:29 +0200
+ * arm64: fix crash reading /proc/kcore (LP: #1702749)
+ - [Config] updateconfigs caused by kcore fix
+
+ [ Ubuntu: 4.10.0-29.33 ]
+
+ * linux: 4.10.0-29.33 -proposed tracker (LP: #1704961)
+ * Opal and POWER9 DD2 (LP: #1702159)
+ - powerpc/powernv: Tell OPAL about our MMU mode on POWER9
+ - powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
+ * CVE-2017-1000364
+ - mm/mmap.c: do not blow on PROT_NONE MAP_FIXED holes in the stack
+ - mm/mmap.c: expand_downwards: don't require the gap if !vm_prev
+ * [Xenial] nvme: Quirks for PM1725 controllers (LP: #1704435)
+ - nvme: Quirks for PM1725 controllers
+ * hns: under heavy load, NIC may fail and require reboot (LP: #1704146)
+ - net: hns: Bugfix for Tx timeout handling in hns driver
+ * New ACPI identifiers for ThunderX SMMU (LP: #1703437)
+ - iommu/arm-smmu: Plumb in new ACPI identifiers
+ * CVE-2017-7482
+ - rxrpc: Fix several cases where a padded len isn't checked in ticket decode
+ * CVE-2017-1000365
+ - fs/exec.c: account for argv/envp pointers
+ * CVE-2017-10810
+ - drm/virtio: don't leak bo on drm_gem_object_init failure
+ * Data corruption with hio driver (LP: #1701316)
+ - SAUCE: hio: Fix incorrect use of enum req_opf values
+ * arm64: fix crash reading /proc/kcore (LP: #1702749)
+ - fs/proc: kcore: use kcore_list type to check for vmalloc/module address
+ - arm64: mm: select CONFIG_ARCH_PROC_KCORE_TEXT
+ * cxlflash update request in the Xenial SRU stream (LP: #1702521)
+ - scsi: cxlflash: Refactor context reset to share reset logic
+ - scsi: cxlflash: Support SQ Command Mode
+ - scsi: cxlflash: Cleanup prints
+ - scsi: cxlflash: Cancel scheduled workers before stopping AFU
+ - scsi: cxlflash: Enable PCI device ID for future IBM CXL Flash AFU
+ - scsi: cxlflash: Separate RRQ processing from the RRQ interrupt handler
+ - scsi: cxlflash: Serialize RRQ access and support offlevel processing
+ - scsi: cxlflash: Implement IRQ polling for RRQ processing
+ - scsi: cxlflash: Update sysfs helper routines to pass config structure
+ - scsi: cxlflash: Support dynamic number of FC ports
+ - scsi: cxlflash: Remove port configuration assumptions
+ - scsi: cxlflash: Hide FC internals behind common access routine
+ - scsi: cxlflash: SISlite updates to support 4 ports
+ - scsi: cxlflash: Support up to 4 ports
+ - scsi: cxlflash: Fence EEH during probe
+ - scsi: cxlflash: Remove unnecessary DMA mapping
+ - scsi: cxlflash: Fix power-of-two validations
+ - scsi: cxlflash: Fix warnings/errors
+ - scsi: cxlflash: Improve asynchronous interrupt processing
+ - scsi: cxlflash: Support multiple hardware queues
+ - scsi: cxlflash: Add hardware queues attribute
+ - scsi: cxlflash: Introduce hardware queue steering
+ - cxl: Enable PCI device IDs for future IBM CXL adapters
+ - scsi: cxlflash: Select IRQ_POLL
+ - scsi: cxlflash: Combine the send queue locks
+ - scsi: cxlflash: Update cxlflash_afu_sync() to return errno
+ - scsi: cxlflash: Reset hardware queue context via specified register
+ - scsi: cxlflash: Schedule asynchronous reset of the host
+ - scsi: cxlflash: Handle AFU sync failures
+ - scsi: cxlflash: Track pending scsi commands in each hardware queue
+ - scsi: cxlflash: Flush pending commands in cleanup path
+ - scsi: cxlflash: Add scsi command abort handler
+ - scsi: cxlflash: Create character device to provide host management interface
+ - scsi: cxlflash: Separate AFU internal command handling from AFU sync
+ specifics
+ - scsi: cxlflash: Introduce host ioctl support
+ - scsi: cxlflash: Refactor AFU capability checking
+ - scsi: cxlflash: Support LUN provisioning
+ - scsi: cxlflash: Support AFU debug
+ - scsi: cxlflash: Support WS16 unmap
+ - scsi: cxlflash: Remove zeroing of private command data
+ - scsi: cxlflash: Update TMF command processing
+ - scsi: cxlflash: Avoid double free of character device
+ - scsi: cxlflash: Update send_tmf() parameters
+ - scsi: cxlflash: Update debug prints in reset handlers
+ * Ath10k to read different board data file if specify in SMBIOS (LP: #1666742)
+ - ath10k: search SMBIOS for OEM board file extension
+ * APST gets enabled against explicit kernel option (LP: #1699004)
+ - nvme: Display raw APST configuration via DYNAMIC_DEBUG
+ - nvme: Add nvme_core.force_apst to ignore the NO_APST quirk
+ - nvme: explicitly disable APST on quirked devices
+ * Quirk for non-compliant PCI bridge on HiSilicon D05 board (LP: #1698706)
+ - SAUCE: PCI: Support hibmc VGA cards behind a misbehaving HiSilicon bridge
+ * New NVLINK2 patches (LP: #1701272)
+ - powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
+ - powerpc/npu-dma: Remove spurious WARN_ON when a PCI device has no of_node
+ * ERAT invalidate on context switch removal (LP: #1700819)
+ - powerpc: Only do ERAT invalidate on radix context switch on P9 DD1
+ * powerpc: Invalidate ERAT on powersave wakeup for POWER9 (LP: #1700521)
+ - powerpc/64s: Invalidate ERAT on powersave wakeup for POWER9
+ * update ENA driver to 1.2.0k from net-next (LP: #1701575)
+ - net/ena: use napi_complete_done() return value
+ - net: ena: remove superfluous check in ena_remove()
+ - net/ena: switch to pci_alloc_irq_vectors
+ - net: ena: fix rare uncompleted admin command false alarm
+ - net: ena: fix bug that might cause hang after consecutive open/close
+ interface.
+ - net: ena: add missing return when ena_com_get_io_handlers() fails
+ - net: ena: fix race condition between submit and completion admin command
+ - net: ena: add missing unmap bars on device removal
+ - net: ena: fix theoretical Rx hang on low memory systems
+ - net: ena: disable admin msix while working in polling mode
+ - net: ena: bug fix in lost tx packets detection mechanism
+ - net: ena: update ena driver to version 1.1.7
+ - net: ena: change return value for unsupported features unsupported return
+ value
+ - net: ena: add hardware hints capability to the driver
+ - net: ena: change sizeof() argument to be the type pointer
+ - net: ena: add reset reason for each device FLR
+ - net: ena: add support for out of order rx buffers refill
+ - net: ena: allow the driver to work with small number of msix vectors
+ - net: ena: use napi_schedule_irqoff when possible
+ - net: ena: separate skb allocation to dedicated function
+ - net: ena: use lower_32_bits()/upper_32_bits() to split dma address
+ - net: ena: update driver's rx drop statistics
+ - net: ena: update ena driver to version 1.2.0
+
+ -- Kleber Sacilotto de Souza <kleber.souza@canonical.com> Wed, 19 Jul 2017 15:53:42 +0200
linux-raspi2 (4.10.0-1011.14) zesty; urgency=low