url="git://github.com/zfsonlinux/zfs.git"
license=(@ZFS_META_LICENSE@)
depends=('spl' 'zlib' 'e2fsprogs')
-backup=('etc/zfs/zdev.conf')
source=(@ZFS_META_NAME@-@ZFS_META_VERSION@.tar.gz)
build() {
SUBDIRS = zfs zpool zdb zhack zinject zstreamdump ztest zpios
-SUBDIRS += mount_zfs fsck_zfs zpool_layout zvol_id zpool_id vdev_id
+SUBDIRS += mount_zfs fsck_zfs zvol_id vdev_id
+++ /dev/null
-dist_udev_SCRIPTS = zpool_id
+++ /dev/null
-#!/bin/sh
-
-CONFIG="${CONFIG:-/etc/zfs/zdev.conf}"
-
-if [ -z "${PATH_ID}" ]; then
- # The path_id helper became a builtin command in udev 174.
- if [ -x '/lib/udev/path_id' ]; then
- PATH_ID='/lib/udev/path_id'
- else
- PATH_ID='udevadm test-builtin path_id'
- fi
-fi
-
-die() {
- echo "Error: $*"
- exit 1
-}
-
-usage() {
- cat << EOF
-Usage: zpool_id [-h] [-c configfile] <devpath>
- -c Alternate config file [default /etc/zfs/zdev.conf]
- -d Use path_id from device as the mapping key
- -h Show this message
-EOF
- exit 1
-}
-
-while getopts 'c:d:h' OPTION; do
- case ${OPTION} in
- c)
- CONFIG="${OPTARG}"
- ;;
- d)
- DEVICE="${OPTARG}"
- ;;
- h)
- usage
- ;;
- esac
-done
-
-# Check that a device was requested
-[ -z "${DEVICE}" ] && usage
-
-# Check for the existence of a configuration file
-[ ! -f "${CONFIG}" ] && die "Missing config file: ${CONFIG}"
-
-# If we are handling a multipath device then $DM_UUID will be
-# exported and we'll use its value (prefixed with dm-uuid per
-# multipathd's naming convention) as our unique persistent key.
-# For traditional devices we'll obtain the key from udev's
-# path_id.
-if [ -n "${DM_UUID}" ] && echo "${DM_UUID}" | grep -q -e '^mpath' ; then
- ID_PATH="dm-uuid-${DM_UUID}"
-else
- eval `${PATH_ID} ${DEVICE}`
- [ -z "${ID_PATH}" ] && die "Missing ID_PATH for ${DEVICE}"
-fi
-
-# Use the persistent key to lookup the zpool device id in the
-# configuration file which is of the format <device id> <key>.
-# Lines starting with #'s are treated as comments and ignored.
-# Exact matches are required, wild cards are not supported,
-# and only the first match is returned.
-ID_ZPOOL=''
-while read CONFIG_ZPOOL CONFIG_PATH REPLY; do
- if [ "${CONFIG_ZPOOL}" != "${CONFIG_ZPOOL#\#}" ]; then
- # Skip comment lines.
- continue
- fi
- if [ "${CONFIG_PATH}" = "${ID_PATH}" ]; then
- ID_ZPOOL="${CONFIG_ZPOOL}"
- break
- fi
-done <"${CONFIG}"
-
-[ -z "${ID_ZPOOL}" ] && die "Missing ID_ZPOOL for ID_PATH: ${ID_PATH}"
-
-if [ -n "${ID_ZPOOL}" ]; then
- echo "ID_PATH=${ID_PATH}"
- echo "ID_ZPOOL=${ID_ZPOOL}"
- echo "ID_ZPOOL_PATH=disk/zpool/${ID_ZPOOL}"
-fi
-
-exit 0
+++ /dev/null
-dist_bin_SCRIPTS = zpool_layout
+++ /dev/null
-#!/bin/bash
-#
-# Direct-Attached Mode
-# --------------------
-# Set BUSES and HOST_PORTS to match the topology of your system. As
-# each port is enumerated it will be assigned the next channel name.
-# The current script enumerates each port on a bus before moving on
-# to enumerate the next bus.
-#
-# Every distribution, version of udev, and type of attached storage
-# seems to result in slightly different formatting of the by-path
-# name. For this reason you may need to adjust the parsing below
-# to suit your needs. This is one of the reasons to use a custom
-# /etc/zfs/zdev.conf file, it allows the by-path naming convention
-# to change and still keep the simple <channel><rank> naming.
-#
-# SAS-Switch Mode
-# -------------------------
-# When the host accesses disk via SAS switches the combination of
-# bus and port number does not necessarily uniquely identify a
-# channel or disk drawer. In this case we must resort to other
-# means to infer the physical topology. For a single-level network
-# (i.e. no switch cascading) we can assign alphabetic channel labels
-# based on the switch port number that the drawer is connected to.
-# If support for more complex topologies is needed this script will
-# need to be customized or replaced.
-#
-# In SAS-Switch mode (enabled with "-g switch" ) we require that
-# udev has been configured to create per-disk symbolic links in
-# /dev/disk/by-id of the form
-# <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that
-# depends on the subsystem that created the link and defaults to
-# "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a
-# unique identifier for the disk typically obtained from the scsi_id
-# program. <X> and <Y> denote the switch port and disk slot
-# numbers, respectively, and are typically obtained from sysfs.
-
-AWK=${AWK:-/usr/bin/awk}
-CONFIG=${CONFIG:-/etc/zfs/zdev.conf}
-BUSES=( 01 02 03 )
-HOST_PORTS=( 4 0 )
-SWITCH_PORTS=( 0 1 2 3 4 5 6 7 8 9 )
-CHANNELS=( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z )
-TOPOLOGY="direct"
-TRIGGER="no"
-MAPPING=linux
-LABEL=${LABEL:-"dm-uuid-mpath"}
-DEV_DISK_DIR="/dev/disk/by-path"
-
-shopt -s extglob
-
-usage() {
- cat << EOF
-Usage: zpool_layout [-th] [-c file] [-b buses] [-o switch_ports]
- [-p host_ports] [-n channels] [-m map] [-l label]
- [-g direct|switch]
- -c Alternate config file [default=${CONFIG}]
- -b Enumerate buses [default="${BUSES[*]}"]
- -o Enumerate switch ports [default="${SWITCH_PORTS[*]}"]
- -p Enumerate host ports [default="${HOST_PORTS[*]}"]
- -n Channel names [default="A..Z"]
- -g Storage network topology [default="${TOPOLOGY}"]
- -t Trigger and wait for udev to settle [default=${TRIGGER}]
- -l Prefix of SAS-switch-mode device links [default=${LABEL}]
- -m Slot mapping [default=${MAPPING}]
- -h Show this message
-EOF
- exit 0
-}
-
-while getopts 'c:b:o:p:n:l:m:g:th' OPTION; do
- case ${OPTION} in
- c)
- CONFIG=${OPTARG}
- ;;
- b)
- BUSES=(${OPTARG})
- ;;
- o)
- SWITCH_PORTS=(${OPTARG})
- ;;
- p)
- HOST_PORTS=(${OPTARG})
- ;;
- n)
- CHANNELS=(${OPTARG})
- ;;
- l)
- LABEL=${OPTARG}
- ;;
- m)
- MAPPING=`readlink -e ${OPTARG}`
- ;;
- g)
- TOPOLOGY=${OPTARG}
- ;;
- t)
- TRIGGER=yes
- ;;
- h)
- usage
- ;;
- esac
-done
-
-# Verify mapping file exists if specified.
-# Linux-Slot Custom-Slot
-if [ ${MAPPING} != "linux" ] && [ ! -e ${MAPPING} ]; then
- echo "Error: Mapping file '${MAPPING}' does not exist"
- exit 1
-fi
-
-# Save stdout as fd #8, then redirect stdout to the config file.
-exec 8>&1
-exec >${CONFIG}
-
-map_slot() {
- local LINUX_SLOT=$1
- local MAPPED_SLOT=
-
- if [ ${MAPPING} = "linux" ]; then
- MAPPED_SLOT=${LINUX_SLOT}
- else
- MAPPED_SLOT=`${AWK} "\\$1 == ${LINUX_SLOT} && !/^#/ \
- { print \\$2; exit }" $MAPPING`
- fi
- printf "%d" ${MAPPED_SLOT}
-}
-
-# Generate host port layout table for comment header.
-print_host_port_layout() {
- echo "# ------------------ Host Port Layout ---------------------"
- echo -n "# "
- for (( i=0; i<${#BUSES[*]}; i++ )); do
- printf "%-8d" ${BUSES[$i]}
- done
- echo
-
- for (( i=0, k=0; i<${#HOST_PORTS[*]}; i++ )); do
- printf "# Port %-2d " ${HOST_PORTS[$i]}
-
- for (( j=0; j<${#BUSES[*]}; j++, k++ )); do
- let k=$j*${#HOST_PORTS[*]}+$i
- printf "%-8s" ${CHANNELS[$k]}
- done
- echo
- done
- echo "#"
-}
-
-# Generate SAS switch port layout table for comment header.
-print_switch_port_layout() {
- echo "# --------------- SAS Switch Port Layout ------------------"
- echo -n "# Switch Port "
- for (( i=0; i<${#SWITCH_PORTS[*]}; i++ )); do
- printf "%3d" ${SWITCH_PORTS[$i]}
- done
- echo
- echo -n "# Channel "
- for (( i=0; i<${#SWITCH_PORTS[*]}; i++ )); do
- printf "%3s" ${CHANNELS[$i]}
- done
- echo
- echo "#"
-}
-
-# Generate channel/disk layout table for comment header.
-print_channel_layout() {
- pushd ${DEV_DISK_DIR} >/dev/null
- echo "# ----------------- Channel/Disk Layout -------------------"
- echo "# Channel Disks"
- if [ ${TOPOLOGY} = "switch" ] ; then
- for (( i=0; i<${#SWITCH_PORTS[*]}; i++ )); do
- printf "# %-9s" ${CHANNELS[$i]}
- p=${SWITCH_PORTS[$i]}
- ls ${LABEL}-+([0-9a-f])-switch-port:${p}-slot:+([0-9]) \
- 2>/dev/null | cut -f3 -d':' | sort -u -n | \
- xargs | tr ' ' ','
- done
- else
- for (( i=0, k=0; i<${#BUSES[*]}; i++ )); do
- for (( j=0; j<${#HOST_PORTS[*]}; j++, k++ )); do
- printf "# %-9s" ${CHANNELS[$k]}
- ls *:${BUSES[$i]}:*:${HOST_PORTS[$j]}* \
- 2>/dev/null | cut -f7 -d'-' | \
- sort -u -n | xargs | tr ' ' ','
- done
- done
- fi
- echo "#"
- popd > /dev/null
-}
-
-# Generate mapping from <channel><rank> to by-path name.
-map_shortname_to_by_path() {
- pushd ${DEV_DISK_DIR} >/dev/null
- for (( i=0, k=0; i<${#BUSES[*]}; i++ )); do
- for (( j=0; j<${#HOST_PORTS[*]}; j++, k++ )); do
- BYPATH=(`ls *:${BUSES[$i]}:*:${HOST_PORTS[$j]}* \
- 2>/dev/null | grep -v part | \
- sort -n -k7 -t'-' | cut -f1-6 -d'-'`)
- SLOTS=(`ls *:${BUSES[$i]}:*:${HOST_PORTS[$j]}* \
- 2>/dev/null | grep -v part | \
- sort -n -k7 -t'-' | cut -f7 -d'-'`)
- TMP_FILE=`mktemp`
-
- for (( l=0; l<${#SLOTS[*]}; l++ )); do
- MAPPED_SLOT=`map_slot ${SLOTS[$l]}`
- printf "%s%d\t%s-%d\n" \
- ${CHANNELS[$k]} ${MAPPED_SLOT} \
- ${BYPATH[$l]} ${SLOTS[$l]} >>${TMP_FILE}
- done
-
- echo
- echo -n "# Channel ${CHANNELS[$k]}, "
- echo "Bus ${BUSES[$i]}, Port ${HOST_PORTS[$j]}"
- cat ${TMP_FILE} | sort -n -k2 -t${CHANNELS[$k]}
- rm -f ${TMP_FILE}
- done
- done
- popd >/dev/null
-}
-
-# Generate mapping from <channel><rank> to by-id name.
-map_shortname_to_by_id() {
- pushd ${DEV_DISK_DIR} >/dev/null
- for (( i=0; i<${#SWITCH_PORTS[*]}; i++ )); do
- p=${SWITCH_PORTS[$i]}
- BYID=(`ls ${LABEL}-+([0-9a-f])-switch-port:${p}-slot:+([0-9]) \
- 2>/dev/null | grep -v part | sort -k3n -t':' | \
- cut -f1-2 -d':'`)
- SLOTS=(`ls ${LABEL}-+([0-9a-f])-switch-port:${p}-slot:+([0-9]) \
- 2>/dev/null | grep -v part | sort -k3n -t':' | \
- cut -f3 -d':'`)
- TMP_FILE=`mktemp`
-
- for (( l=0; l<${#SLOTS[*]}; l++ )); do
- MAPPED_SLOT=`map_slot ${SLOTS[$l]}`
- printf "%s%d\t%s:%d\n" \
- ${CHANNELS[$i]} ${MAPPED_SLOT} ${BYID[$l]} \
- ${SLOTS[$l]} >>${TMP_FILE}
- done
-
- echo
- echo -n "# Channel ${CHANNELS[$i]}, "
- echo "SAS Switch Port ${SWITCH_PORTS[$i]}"
- cat ${TMP_FILE} | sort -n -k2 -t${CHANNELS[$i]}
- rm -f ${TMP_FILE}
- done
- popd > /dev/null
-}
-
-# Generate comment header.
-echo "#"
-echo "# Custom ${DEV_DISK_DIR} to /dev/disk/zpool mapping, "
-echo "# based of the following physical cable layout."
-echo "#"
-
-case ${TOPOLOGY} in
- direct)
- print_host_port_layout
- print_channel_layout
- map_shortname_to_by_path
- ;;
- switch)
- DEV_DISK_DIR="/dev/disk/by-id"
- print_switch_port_layout
- print_channel_layout
- map_shortname_to_by_id
- ;;
-esac
-
-# Restore stdout from fd #8 and close fd #8.
-exec 1>&8 8>&-
-
-if [ ${TRIGGER} = "yes" ]; then
- udevadm trigger --action=change --subsystem-match=block
- udevadm settle
-fi
-
-exit 0
cmd/zpios/Makefile
cmd/mount_zfs/Makefile
cmd/fsck_zfs/Makefile
- cmd/zpool_layout/Makefile
cmd/zvol_id/Makefile
- cmd/zpool_id/Makefile
cmd/vdev_id/Makefile
module/Makefile
module/avl/Makefile
scripts/zpios-profile/Makefile
scripts/zpios-test/Makefile
scripts/zpool-config/Makefile
- scripts/zpool-layout/Makefile
scripts/common.sh
zfs.spec
zfs-modules.spec
inst_rules @udevruledir@/90-zfs.rules
inst_rules @udevruledir@/60-zpool.rules
inst_rules @udevruledir@/60-zvol.rules
- inst @sysconfdir@/zfs/zdev.conf
inst @sysconfdir@/zfs/zpool.cache
dracut_install @sbindir@/zfs
dracut_install @sbindir@/zpool
- dracut_install @bindir@/zpool_layout
- dracut_install @udevdir@/zpool_id
+ dracut_install @udevdir@/vdev_id
dracut_install @udevdir@/zvol_id
dracut_install mount.zfs
dracut_install hostid
vdev_id.conf.alias.example \
vdev_id.conf.sas_direct.example \
vdev_id.conf.sas_switch.example \
- vdev_id.conf.multipath.example \
- zdev.conf \
- zdev.conf.supermicro.example \
- zdev.conf.dragon.example \
- zdev.conf.x4550.example
+ vdev_id.conf.multipath.example
EXTRA_DIST = $(pkgsysconf_DATA)
+++ /dev/null
-#
-# Custom by-path mapping for large JBOD configurations
-#
-# Example Config: Desktop
-#
-
-#<ID> <by-path name>
-#disk1 pci-0000:61:06.1-scsi-0:0:0:0
-#disk2 pci-0000:61:06.1-scsi-0:0:0:1
+++ /dev/null
-#
-# Custom by-path mapping for large JBOD configurations
-#
-# Example Config:
-# Quarter scale dragon drawer based SSU for RHEL6
-#
-
-# Channel A: PCI Bus 3, Enclosure 0x50001ff10e991000
-a1 pci-0000:03:00.0-sas-0x50001ff10e991000-34
-a2 pci-0000:03:00.0-sas-0x50001ff10e991000-35
-a3 pci-0000:03:00.0-sas-0x50001ff10e991000-39
-a4 pci-0000:03:00.0-sas-0x50001ff10e991000-40
-a5 pci-0000:03:00.0-sas-0x50001ff10e991000-44
-a6 pci-0000:03:00.0-sas-0x50001ff10e991000-45
-a7 pci-0000:03:00.0-sas-0x50001ff10e991000-48
-a8 pci-0000:03:00.0-sas-0x50001ff10e991000-49
-a9 pci-0000:03:00.0-sas-0x50001ff10e991000-50
-a10 pci-0000:03:00.0-sas-0x50001ff10e991000-53
-a11 pci-0000:03:00.0-sas-0x50001ff10e991000-54
-a12 pci-0000:03:00.0-sas-0x50001ff10e991000-55
-a13 pci-0000:03:00.0-sas-0x50001ff10e991000-58
-a14 pci-0000:03:00.0-sas-0x50001ff10e991000-59
-a15 pci-0000:03:00.0-sas-0x50001ff10e991000-60
-
-# Channel B: PCI Bus 3, Enclosure 0x50001ff10e9d1000
-b1 pci-0000:03:00.0-sas-0x50001ff10e9d1000-34
-b2 pci-0000:03:00.0-sas-0x50001ff10e9d1000-35
-b3 pci-0000:03:00.0-sas-0x50001ff10e9d1000-39
-b4 pci-0000:03:00.0-sas-0x50001ff10e9d1000-40
-b5 pci-0000:03:00.0-sas-0x50001ff10e9d1000-44
-b6 pci-0000:03:00.0-sas-0x50001ff10e9d1000-45
-b7 pci-0000:03:00.0-sas-0x50001ff10e9d1000-48
-b8 pci-0000:03:00.0-sas-0x50001ff10e9d1000-49
-b9 pci-0000:03:00.0-sas-0x50001ff10e9d1000-50
-b10 pci-0000:03:00.0-sas-0x50001ff10e9d1000-53
-b11 pci-0000:03:00.0-sas-0x50001ff10e9d1000-54
-b12 pci-0000:03:00.0-sas-0x50001ff10e9d1000-55
-b13 pci-0000:03:00.0-sas-0x50001ff10e9d1000-58
-b14 pci-0000:03:00.0-sas-0x50001ff10e9d1000-59
-b15 pci-0000:03:00.0-sas-0x50001ff10e9d1000-60
-
-# Channel C: PCI Bus 4, Enclosure 0x50001ff10e991000
-c1 pci-0000:04:00.0-sas-0x50001ff10e991000-31
-c2 pci-0000:04:00.0-sas-0x50001ff10e991000-32
-c3 pci-0000:04:00.0-sas-0x50001ff10e991000-33
-c4 pci-0000:04:00.0-sas-0x50001ff10e991000-36
-c5 pci-0000:04:00.0-sas-0x50001ff10e991000-37
-c6 pci-0000:04:00.0-sas-0x50001ff10e991000-38
-c7 pci-0000:04:00.0-sas-0x50001ff10e991000-41
-c8 pci-0000:04:00.0-sas-0x50001ff10e991000-42
-c9 pci-0000:04:00.0-sas-0x50001ff10e991000-43
-c10 pci-0000:04:00.0-sas-0x50001ff10e991000-46
-c11 pci-0000:04:00.0-sas-0x50001ff10e991000-47
-c12 pci-0000:04:00.0-sas-0x50001ff10e991000-51
-c13 pci-0000:04:00.0-sas-0x50001ff10e991000-52
-c14 pci-0000:04:00.0-sas-0x50001ff10e991000-56
-c15 pci-0000:04:00.0-sas-0x50001ff10e991000-57
-
-# Channel D: PCI Bus 4, Enclosure 0x50001ff10e9d1000
-d1 pci-0000:04:00.0-sas-0x50001ff10e9d1000-31
-d2 pci-0000:04:00.0-sas-0x50001ff10e9d1000-32
-d3 pci-0000:04:00.0-sas-0x50001ff10e9d1000-33
-d4 pci-0000:04:00.0-sas-0x50001ff10e9d1000-36
-d5 pci-0000:04:00.0-sas-0x50001ff10e9d1000-37
-d6 pci-0000:04:00.0-sas-0x50001ff10e9d1000-38
-d7 pci-0000:04:00.0-sas-0x50001ff10e9d1000-41
-d8 pci-0000:04:00.0-sas-0x50001ff10e9d1000-42
-d9 pci-0000:04:00.0-sas-0x50001ff10e9d1000-43
-d10 pci-0000:04:00.0-sas-0x50001ff10e9d1000-46
-d11 pci-0000:04:00.0-sas-0x50001ff10e9d1000-47
-d12 pci-0000:04:00.0-sas-0x50001ff10e9d1000-51
-d13 pci-0000:04:00.0-sas-0x50001ff10e9d1000-52
-d14 pci-0000:04:00.0-sas-0x50001ff10e9d1000-56
-d15 pci-0000:04:00.0-sas-0x50001ff10e9d1000-57
-
-# Channel E: PCI Bus 84, Enclosure 0x50001ff10e991000
-e1 pci-0000:84:00.0-sas-0x50001ff10e991000-3
-e2 pci-0000:84:00.0-sas-0x50001ff10e991000-4
-e3 pci-0000:84:00.0-sas-0x50001ff10e991000-5
-e4 pci-0000:84:00.0-sas-0x50001ff10e991000-8
-e5 pci-0000:84:00.0-sas-0x50001ff10e991000-9
-e6 pci-0000:84:00.0-sas-0x50001ff10e991000-10
-e7 pci-0000:84:00.0-sas-0x50001ff10e991000-13
-e8 pci-0000:84:00.0-sas-0x50001ff10e991000-14
-e9 pci-0000:84:00.0-sas-0x50001ff10e991000-15
-e10 pci-0000:84:00.0-sas-0x50001ff10e991000-19
-e11 pci-0000:84:00.0-sas-0x50001ff10e991000-20
-e12 pci-0000:84:00.0-sas-0x50001ff10e991000-24
-e13 pci-0000:84:00.0-sas-0x50001ff10e991000-25
-e14 pci-0000:84:00.0-sas-0x50001ff10e991000-29
-e15 pci-0000:84:00.0-sas-0x50001ff10e991000-30
-
-# Channel F: PCI Bus 84, Enclosure 0x50001ff10e9d1000
-f1 pci-0000:84:00.0-sas-0x50001ff10e9d1000-3
-f2 pci-0000:84:00.0-sas-0x50001ff10e9d1000-4
-f3 pci-0000:84:00.0-sas-0x50001ff10e9d1000-5
-f4 pci-0000:84:00.0-sas-0x50001ff10e9d1000-8
-f5 pci-0000:84:00.0-sas-0x50001ff10e9d1000-9
-f6 pci-0000:84:00.0-sas-0x50001ff10e9d1000-10
-f7 pci-0000:84:00.0-sas-0x50001ff10e9d1000-13
-f8 pci-0000:84:00.0-sas-0x50001ff10e9d1000-14
-f9 pci-0000:84:00.0-sas-0x50001ff10e9d1000-15
-f10 pci-0000:84:00.0-sas-0x50001ff10e9d1000-19
-f11 pci-0000:84:00.0-sas-0x50001ff10e9d1000-20
-f12 pci-0000:84:00.0-sas-0x50001ff10e9d1000-24
-f13 pci-0000:84:00.0-sas-0x50001ff10e9d1000-25
-f14 pci-0000:84:00.0-sas-0x50001ff10e9d1000-29
-f15 pci-0000:84:00.0-sas-0x50001ff10e9d1000-30
-
-# Channel G: PCI Bus 85, Enclosure 0x50001ff10e991000
-g1 pci-0000:85:00.0-sas-0x50001ff10e991000-1
-g2 pci-0000:85:00.0-sas-0x50001ff10e991000-2
-g3 pci-0000:85:00.0-sas-0x50001ff10e991000-6
-g4 pci-0000:85:00.0-sas-0x50001ff10e991000-7
-g5 pci-0000:85:00.0-sas-0x50001ff10e991000-11
-g6 pci-0000:85:00.0-sas-0x50001ff10e991000-12
-g7 pci-0000:85:00.0-sas-0x50001ff10e991000-16
-g8 pci-0000:85:00.0-sas-0x50001ff10e991000-17
-g9 pci-0000:85:00.0-sas-0x50001ff10e991000-18
-g10 pci-0000:85:00.0-sas-0x50001ff10e991000-21
-g11 pci-0000:85:00.0-sas-0x50001ff10e991000-22
-g12 pci-0000:85:00.0-sas-0x50001ff10e991000-23
-g13 pci-0000:85:00.0-sas-0x50001ff10e991000-26
-g14 pci-0000:85:00.0-sas-0x50001ff10e991000-27
-g15 pci-0000:85:00.0-sas-0x50001ff10e991000-28
-
-# Channel H: PCI Bus 85, Enclosure 0x50001ff10e9d1000
-h1 pci-0000:85:00.0-sas-0x50001ff10e9d1000-1
-h2 pci-0000:85:00.0-sas-0x50001ff10e9d1000-2
-h3 pci-0000:85:00.0-sas-0x50001ff10e9d1000-6
-h4 pci-0000:85:00.0-sas-0x50001ff10e9d1000-7
-h5 pci-0000:85:00.0-sas-0x50001ff10e9d1000-11
-h6 pci-0000:85:00.0-sas-0x50001ff10e9d1000-12
-h7 pci-0000:85:00.0-sas-0x50001ff10e9d1000-16
-h8 pci-0000:85:00.0-sas-0x50001ff10e9d1000-17
-h9 pci-0000:85:00.0-sas-0x50001ff10e9d1000-18
-h10 pci-0000:85:00.0-sas-0x50001ff10e9d1000-21
-h11 pci-0000:85:00.0-sas-0x50001ff10e9d1000-22
-h12 pci-0000:85:00.0-sas-0x50001ff10e9d1000-23
-h13 pci-0000:85:00.0-sas-0x50001ff10e9d1000-26
-h14 pci-0000:85:00.0-sas-0x50001ff10e9d1000-27
-h15 pci-0000:85:00.0-sas-0x50001ff10e9d1000-28
-
-# Channel I: PCI Bus 83, Enclosure 0x5000155359b8e33f
-i1 pci-0000:83:00.0-sas-0x5000155359b8e33f-0
-i2 pci-0000:83:00.0-sas-0x5000155359b8e33f-1
-i3 pci-0000:83:00.0-sas-0x5000155359b8e33f-2
-i4 pci-0000:83:00.0-sas-0x5000155359b8e33f-3
-i5 pci-0000:83:00.0-sas-0x5000155359b8e33f-4
-i6 pci-0000:83:00.0-sas-0x5000155359b8e33f-5
-i7 pci-0000:83:00.0-sas-0x5000155359b8e33f-6
-i8 pci-0000:83:00.0-sas-0x5000155359b8e33f-7
-i9 pci-0000:83:00.0-sas-0x5000155359b8e33f-8
-i10 pci-0000:83:00.0-sas-0x5000155359b8e33f-9
-i11 pci-0000:83:00.0-sas-0x5000155359b8e33f-10
-i12 pci-0000:83:00.0-sas-0x5000155359b8e33f-11
-i13 pci-0000:83:00.0-sas-0x5000155359b8e33f-12
-i14 pci-0000:83:00.0-sas-0x5000155359b8e33f-13
-i15 pci-0000:83:00.0-sas-0x5000155359b8e33f-14
-
-# Channel J: PCI Bus 83, Enclosure 0x5000155359dba33f
-j1 pci-0000:83:00.0-sas-0x5000155359dba33f-0
-j2 pci-0000:83:00.0-sas-0x5000155359dba33f-1
-j3 pci-0000:83:00.0-sas-0x5000155359dba33f-2
-j4 pci-0000:83:00.0-sas-0x5000155359dba33f-3
-j5 pci-0000:83:00.0-sas-0x5000155359dba33f-4
-j6 pci-0000:83:00.0-sas-0x5000155359dba33f-5
-j7 pci-0000:83:00.0-sas-0x5000155359dba33f-6
-j8 pci-0000:83:00.0-sas-0x5000155359dba33f-7
-j9 pci-0000:83:00.0-sas-0x5000155359dba33f-8
-j10 pci-0000:83:00.0-sas-0x5000155359dba33f-9
-j11 pci-0000:83:00.0-sas-0x5000155359dba33f-10
-j12 pci-0000:83:00.0-sas-0x5000155359dba33f-11
-j13 pci-0000:83:00.0-sas-0x5000155359dba33f-12
-j14 pci-0000:83:00.0-sas-0x5000155359dba33f-13
-j15 pci-0000:83:00.0-sas-0x5000155359dba33f-14
+++ /dev/null
-#
-# Custom by-path mapping for large JBOD configurations
-#
-# Example Config:
-# Single Supermicro JBOD for RHEL6
-#
-
-# Channel A: PCI Bus 7, Enclosure 0x500304800027367f
-a1 pci-0000:07:00.0-sas-0x500304800027367f-0
-a2 pci-0000:07:00.0-sas-0x500304800027367f-1
-a3 pci-0000:07:00.0-sas-0x500304800027367f-2
-a4 pci-0000:07:00.0-sas-0x500304800027367f-3
-
-# Channel B: PCI Bus 7, Enclosure 0x500304800027367f
-b1 pci-0000:07:00.0-sas-0x500304800027367f-4
-b2 pci-0000:07:00.0-sas-0x500304800027367f-5
-b3 pci-0000:07:00.0-sas-0x500304800027367f-6
-b4 pci-0000:07:00.0-sas-0x500304800027367f-7
-
-# Channel C: PCI Bus 7, Enclosure 0x500304800027367f
-c1 pci-0000:07:00.0-sas-0x500304800027367f-8
-c2 pci-0000:07:00.0-sas-0x500304800027367f-9
-c3 pci-0000:07:00.0-sas-0x500304800027367f-10
-c4 pci-0000:07:00.0-sas-0x500304800027367f-11
-
-# Channel D: PCI Bus 7, Enclosure 0x500304800027367f
-d1 pci-0000:07:00.0-sas-0x500304800027367f-12
-d2 pci-0000:07:00.0-sas-0x500304800027367f-13
-d3 pci-0000:07:00.0-sas-0x500304800027367f-14
-d4 pci-0000:07:00.0-sas-0x500304800027367f-15
+++ /dev/null
-#
-# Custom by-path mapping for large JBOD configurations
-#
-# Example Config:
-# Sun x4550 for RHEL5
-#
-
-# Channel A: PCI Bus 2
-a1 pci-0000:02:00.0-sas-0x50062b0000000001:1:0-0xd6807184d601e192:0
-a2 pci-0000:02:00.0-sas-0x50062b0000000002:1:1-0xd4905378e6e3d592:1
-a3 pci-0000:02:00.0-sas-0x50062b0000000003:1:2-0xd3827673d806d392:2
-a4 pci-0000:02:00.0-sas-0x50062b0000000004:1:3-0xd6805385d6e3e192:3
-a5 pci-0000:02:00.0-sas-0x50062b0000000005:1:4-0xd680655bd6f5b792:4
-a6 pci-0000:02:00.0-sas-0x50062b0000000006:1:5-0x7a967598ec06d091:5
-a7 pci-0000:02:00.0-sas-0x50062b0000000007:1:6-0xd3826c60d8fcbf92:6
-a8 pci-0000:02:00.0-sas-0x50062b0000000008:1:7-0xd6805271d6e2cd92:7
-
-# Channel B: PCI Bus 3
-b1 pci-0000:03:00.0-sas-0x50062b0000000002:1:0-0xd680685fd6f8bb92:0
-b2 pci-0000:03:00.0-sas-0x50062b0000000003:1:1-0xd58c706de200cb92:1
-b3 pci-0000:03:00.0-sas-0x50062b0000000004:1:2-0xd5897480df04de92:2
-b4 pci-0000:03:00.0-sas-0x50062b0000000005:1:3-0xd6805764d6e7c092:3
-b5 pci-0000:03:00.0-sas-0x50062b0000000006:1:4-0xd6806a6dd6fac992:4
-b6 pci-0000:03:00.0-sas-0x50062b0000000007:1:5-0xd58c6b84e2fbe192:5
-b7 pci-0000:03:00.0-sas-0x50062b0000000008:1:6-0xd58a576ee0e7cb92:6
-b8 pci-0000:03:00.0-sas-0x50062b0000000009:1:7-0xd5877871dd08cf92:7
-
-# Channel C: PCI Bus 4
-c1 pci-0000:04:00.0-sas-0x50062b0000000003:1:0-0xd6806678d6f6d492:0
-c2 pci-0000:04:00.0-sas-0x50062b0000000004:1:1-0xd680696fd6f9cb92:1
-c3 pci-0000:04:00.0-sas-0x50062b0000000005:1:2-0xd3827182d801e292:2
-c4 pci-0000:04:00.0-sas-0x50062b0000000006:1:3-0xd680666fd6f6cb92:3
-c5 pci-0000:04:00.0-sas-0x50062b0000000007:1:4-0xd6806970d6f9cc92:4
-c6 pci-0000:04:00.0-sas-0x50062b0000000008:1:5-0xd6806b62d6fbbe92:5
-c7 pci-0000:04:00.0-sas-0x50062b0000000009:1:6-0xd58a5760e0e7bd92:6
-c8 pci-0000:04:00.0-sas-0x50062b000000000a:1:7-0xd680717fd601dc92:7
-
-# Channel D: PCI Bus 41
-d1 pci-0000:41:00.0-sas-0x50062b0000000004:1:0-0xd6806572d6f5ce92:0
-d2 pci-0000:41:00.0-sas-0x50062b0000000005:1:1-0xd6806983d6f9df92:1
-d3 pci-0000:41:00.0-sas-0x50062b0000000006:1:2-0xd3826c69d8fcc892:2
-d4 pci-0000:41:00.0-sas-0x50062b0000000007:1:3-0xd680725fd602bc92:3
-d5 pci-0000:41:00.0-sas-0x50062b0000000008:1:4-0xd6806971d6f9cd92:4
-d6 pci-0000:41:00.0-sas-0x50062b0000000009:1:5-0xd680726dd602ca92:5
-d7 pci-0000:41:00.0-sas-0x50062b000000000a:1:6-0xd3827772d807d292:6
-d8 pci-0000:41:00.0-sas-0x50062b000000000b:1:7-0xd4955584ebe5e192:7
-
-# Channel E: PCI Bus 42
-e1 pci-0000:42:00.0-sas-0x50062b0000000005:1:0-0xd4925676e8e6d392:0
-e2 pci-0000:42:00.0-sas-0x50062b0000000006:1:1-0xd6806b6ed6fbca92:1
-e3 pci-0000:42:00.0-sas-0x50062b0000000007:1:2-0xd382765fd806bf92:2
-e4 pci-0000:42:00.0-sas-0x50062b0000000008:1:3-0xd587786cdd08ca92:3
-e5 pci-0000:42:00.0-sas-0x50062b0000000009:1:4-0xd66f4e5bc5deb792:4
-e6 pci-0000:42:00.0-sas-0x50062b000000000a:1:5-0xd6806879d6f8d592:5
-e7 pci-0000:42:00.0-sas-0x50062b000000000b:1:6-0xd5885175dee1d292:6
-e8 pci-0000:42:00.0-sas-0x50062b000000000c:1:7-0xd588515fdee1bc92:7
-
-# Channel F: PCI Bus 43
-f1 pci-0000:43:00.0-sas-0x50062b0000000006:1:0-0xd66d6978c3f9d492:0
-f2 pci-0000:43:00.0-sas-0x50062b0000000007:1:1-0xd6806a5cd6fab892:1
-f3 pci-0000:43:00.0-sas-0x50062b0000000008:1:2-0xd6806563d6f5bf92:2
-f4 pci-0000:43:00.0-sas-0x50062b0000000009:1:3-0xd6805664d6e6c092:3
-f5 pci-0000:43:00.0-sas-0x50062b000000000a:1:4-0xd58c707ee200dc92:4
-f6 pci-0000:43:00.0-sas-0x50062b000000000b:1:5-0xd5885781dee7de92:5
-f7 pci-0000:43:00.0-sas-0x50062b000000000c:1:6-0xd3827481d804e192:6
-f8 pci-0000:43:00.0-sas-0x50062b000000000d:1:7-0xd6806863d6f8bf92:7
#define DISK_ROOT "/dev"
#define UDISK_ROOT "/dev/disk"
-#define DEFAULT_IMPORT_PATH_SIZE 8
+#define DEFAULT_IMPORT_PATH_SIZE 7
extern char *zpool_default_import_path[DEFAULT_IMPORT_PATH_SIZE];
/*
char *
zpool_default_import_path[DEFAULT_IMPORT_PATH_SIZE] = {
"/dev/disk/by-vdev", /* Custom rules, use first if they exist */
- "/dev/disk/zpool", /* Custom rules, use first if they exist */
"/dev/mapper", /* Use multipath devices before components */
"/dev/disk/by-uuid", /* Single unique entry and persistent */
"/dev/disk/by-id", /* May be multiple entries and persistent */
-SUBDIRS = zpool-config zpool-layout zpios-test zpios-profile
+SUBDIRS = zpool-config zpios-test zpios-profile
pkglibexecdir = $(libexecdir)/@PACKAGE@
dist_pkglibexec_SCRIPTS = \
sysconfdir=@sysconfdir@
ETCDIR=${ETCDIR:-/etc}
-DEVDIR=${DEVDIR:-/dev/disk/zpool}
+DEVDIR=${DEVDIR:-/dev/disk/by-vdev}
ZPOOLDIR=${ZPOOLDIR:-${pkglibexecdir}/zpool-config}
ZPIOSDIR=${ZPIOSDIR:-${pkglibexecdir}/zpios-test}
ZPIOSPROFILEDIR=${ZPIOSPROFILEDIR:-${pkglibexecdir}/zpios-profile}
ZFS=${ZFS:-${sbindir}/zfs}
ZINJECT=${ZINJECT:-${sbindir}/zinject}
ZPOOL=${ZPOOL:-${sbindir}/zpool}
-ZPOOL_ID=${ZPOOL_ID:-${bindir}/zpool_id}
ZTEST=${ZTEST:-${sbindir}/ztest}
ZPIOS=${ZPIOS:-${sbindir}/zpios}
#
# The following udev helper functions assume that the provided
-# udev rules file will create a /dev/disk/zpool/<CHANNEL><RANK>
+# udev rules file will create a /dev/disk/by-vdev/<CHANNEL><RANK>
# disk mapping. In this mapping each CHANNEL is represented by
# the letters a-z, and the RANK is represented by the numbers
# 1-n. A CHANNEL should identify a group of RANKS which are all
#
# Zpool Raid-0 Configuration
#
-# This script is used to simplify testing with the /dev/disk/zpool/[A-Z][1-n]
-# devices. It assumes that you have already populated /dev/disk/zpool/ by
-# creating an /etc/zfs/zdev.conf file based on your system design. You may
-# use the zpool_layout command or manually create your own config file.
+# This script is used to test with the /dev/disk/by-vdev/[A-Z][1-n] devices.
+# It assumes that you have already populated /dev/disk/by-vdev/ by creating
+# an /etc/zfs/vdev_id.conf file based on your system design.
#
# You can then use either the zpool-create.sh or the zpios.sh test script to
# test various Raid-0 configurations by adjusting the following tunables.
#
# Zpool Raid-10 Configuration
#
-# This script is used to simplify testing with the /dev/disk/zpool/[A-Z][1-n]
-# devices. It assumes that you have already populated /dev/disk/zpool/ by
-# creating an /etc/zfs/zdev.conf file based on your system design. You may
-# use the zpool_layout command or manually create your own config file.
+# This script is used to test with the /dev/disk/by-vdev/[A-Z][1-n] devices.
+# It assumes that you have already populated /dev/disk/by-vdev/ by creating
+# an /etc/zfs/vdev_id.conf file based on your system design.
#
# You can then use either the zpool-create.sh or the zpios.sh test script to
# test various Raid-10 configurations by adjusting the following tunables.
#
# Zpool Raid-Z Configuration
#
-# This script is used to simplify testing with the /dev/disk/zpool/[A-Z][1-n]
-# devices. It assumes that you have already populated /dev/disk/zpool/ by
-# creating an /etc/zfs/zdev.conf file based on your system design. You may
-# use the zpool_layout command or manually create your own config file.
+# This script is used to test with the /dev/disk/by-vdev/[A-Z][1-n] devices.
+# It assumes that you have already populated /dev/disk/by-vdev/ by creating
+# an /etc/zfs/vdev_id.conf file based on your system design.
#
# You can then use either the zpool-create.sh or the zpios.sh test script to
# test various Raid-Z configurations by adjusting the following tunables.
+++ /dev/null
-pkglibexecdir = $(libexecdir)/@PACKAGE@/zpool-layout
-dist_pkglibexec_SCRIPTS = \
- $(top_srcdir)/scripts/zpool-layout/dragon.ddn.conf \
- $(top_srcdir)/scripts/zpool-layout/dragon.llnl.conf
-
-all:
- @list='$(dist_pkglibexec_SCRIPTS)'; \
- for file in $$list; do \
- link=$$(basename $$file); \
- if [ ! -e $$link ]; then \
- $(LN_S) $$file $$link; \
- fi \
- done
-
-clean:
- @list='$(dist_pkglibexec_SCRIPTS)'; \
- for file in $$list; do \
- link=$$(basename $$file); \
- if [ -L $$link ]; then \
- $(RM) $$link; \
- fi \
- done
+++ /dev/null
-#
-# Custom DDN slot mapping for zpool_layout command and
-# StorageScaler 6000 enclosures (Dragon Drawer).
-#
-# Linux DDN
-# Slot Slot
-#
-1 1
-2 13
-3 25
-4 37
-5 49
-6 2
-7 14
-8 26
-9 38
-10 50
-11 3
-12 15
-13 27
-14 39
-15 51
-16 4
-17 16
-18 28
-19 40
-20 52
-21 5
-22 17
-23 29
-24 41
-25 53
-26 6
-27 18
-28 30
-29 42
-30 54
-31 7
-32 19
-33 31
-34 43
-35 55
-36 8
-37 20
-38 32
-39 44
-40 56
-41 9
-42 21
-43 33
-44 45
-45 57
-46 10
-47 22
-48 34
-49 46
-50 58
-51 11
-52 23
-53 35
-54 47
-55 59
-56 12
-57 24
-58 36
-59 48
-60 60
+++ /dev/null
-#
-# Custom LLNL slot mapping for zpool_layout command and
-# StorageScaler 6000 enclosures (Dragon Drawer).
-#
-# Linux LLNL
-# Slot Slot
-#
-1 25
-2 19
-3 13
-4 7
-5 1
-6 26
-7 20
-8 14
-9 8
-10 2
-11 27
-12 21
-13 15
-14 9
-15 3
-16 28
-17 22
-18 16
-19 10
-20 4
-21 29
-22 23
-23 17
-24 11
-25 5
-26 30
-27 24
-28 18
-29 12
-30 6
-31 60
-32 54
-33 48
-34 42
-35 36
-36 59
-37 53
-38 47
-39 41
-40 35
-41 58
-42 52
-43 46
-44 40
-45 34
-46 57
-47 51
-48 45
-49 39
-50 33
-51 56
-52 50
-53 44
-54 38
-55 32
-56 55
-57 49
-58 43
-59 37
-60 31
+++ /dev/null
-#
-# @udevdir@/rules.d/60-zpool.rules
-#
-
-ENV{DEVTYPE}=="disk", IMPORT{program}="@udevdir@/zpool_id -d %p"
-
-KERNEL=="*[!0-9]", ENV{SUBSYSTEM}=="block", ENV{ID_ZPOOL}=="?*", SYMLINK+="$env{ID_ZPOOL_PATH}"
-KERNEL=="*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="partition", ENV{ID_ZPOOL}=="?*", SYMLINK+="$env{ID_ZPOOL_PATH}-part%n"
-KERNEL=="dm-[0-9]*", ENV{SUBSYSTEM}=="block", ENV{ID_ZPOOL}=="?*", SYMLINK+="$env{ID_ZPOOL_PATH}"
udevrule_DATA = \
$(top_srcdir)/udev/rules.d/69-vdev.rules \
- $(top_srcdir)/udev/rules.d/60-zpool.rules \
$(top_srcdir)/udev/rules.d/60-zvol.rules \
$(top_srcdir)/udev/rules.d/90-zfs.rules
EXTRA_DIST = \
$(top_srcdir)/udev/rules.d/69-vdev.rules.in \
- $(top_srcdir)/udev/rules.d/60-zpool.rules.in \
$(top_srcdir)/udev/rules.d/60-zvol.rules.in \
$(top_srcdir)/udev/rules.d/90-zfs.rules.in
ZFS=${CMDDIR}/zfs/zfs
ZINJECT=${CMDDIR}/zinject/zinject
ZPOOL=${CMDDIR}/zpool/zpool
-ZPOOL_ID=${CMDDIR}/zpool_id/zpool_id
ZTEST=${CMDDIR}/ztest/ztest
ZPIOS=${CMDDIR}/zpios/zpios
%files
%defattr(-, root, root)
%{_sbindir}/*
-%{_bindir}/*
%{_libdir}/*
%{_mandir}/man5/*
%{_mandir}/man8/*
%config %{_sysconfdir}/init.d/*
%config %{_sysconfdir}/zfs/*
-%config(noreplace) %{_sysconfdir}/zfs/zdev.conf
%doc AUTHORS COPYING COPYRIGHT DISCLAIMER
%doc OPENSOLARIS.LICENSE README.markdown ZFS.RELEASE
projects / mirror_zfs-debian.git / commitdiff