* Reworked .service files to make them look like in Ubuntu (as I still want

[ovs.git] / debian / changelog

openvswitch (2.15.0~git20210104.def6eb1ea+dfsg1-3) unstable; urgency=medium

  * Reworked .service files to make them look like in Ubuntu (as I still want
    our packages converge).

 -- Thomas Goirand <zigo@debian.org>  Mon, 11 Jan 2021 21:08:37 +0100

openvswitch (2.15.0~git20210104.def6eb1ea+dfsg1-2) unstable; urgency=medium

  * Blacklist more tests for mipsel and mipsel64.

 -- Thomas Goirand <zigo@debian.org>  Mon, 11 Jan 2021 00:20:48 +0100

openvswitch (2.15.0~git20210104.def6eb1ea+dfsg1-1) unstable; urgency=high

  [ Luca Boccassi ]
  * Merge branch 'master-dfsg' into 2.15
  * Bump dependency on libbpdk-dev >= 20.11 (Closes: #974588)
  * Refresh py3-compat.patch for v2.15
  * Realign armhf test skip range due to upstream changes
  * Use new --with-dpdk=shared configure flag value

  [ Thomas Goirand ]
  * Blacklist test 532 (because non-deterministic).

 -- Thomas Goirand <zigo@debian.org>  Sun, 10 Jan 2021 14:56:30 +0100

openvswitch (2.13.0+dfsg1-16) unstable; urgency=medium

  * Generating postinst at build time to avoid using dpkg-architecture at
    runtime.

 -- Thomas Goirand <zigo@debian.org>  Wed, 06 Jan 2021 22:13:51 +0100

openvswitch (2.13.0+dfsg1-15) unstable; urgency=medium

  * Fix installing OVS alternatives on non-amd64 arch (Closes: #979366).

 -- Thomas Goirand <zigo@debian.org>  Tue, 05 Jan 2021 22:29:08 +0100

openvswitch (2.13.0+dfsg1-14) unstable; urgency=medium

  * Starts openvswitch-nonetwork.service after dpdk.service. Thanks to
    Adriaan Schmidt from Siemens for the report (Closes: #968333).
  * Fix ifupdown.sh script (Closes: #964029).
  * Fix dh_installinit dh_installsystemd calls, and switch to debhelper-compat
    12 (Closes: #961746).

 -- Thomas Goirand <zigo@debian.org>  Tue, 05 Jan 2021 13:49:14 +0100

openvswitch (2.13.0+dfsg1-13) unstable; urgency=medium

  * control: Remove myself as an uploader.

 -- Ben Pfaff <pfaffben@debian.org>  Sun, 13 Dec 2020 15:13:09 -0800

openvswitch (2.13.0+dfsg1-12) unstable; urgency=medium

  * d/rules: replace x86_64-linux-gnu by a wildcard so it works in all arch.

 -- Thomas Goirand <zigo@debian.org>  Tue, 30 Jun 2020 17:02:50 +0200

openvswitch (2.13.0+dfsg1-11) unstable; urgency=medium

  * Always blacklist 1021 and 1057 (also on amd64).
  * Add patch from Schmidt Adriaan to fix dpdk runtime installation of
    alternatives. Thanks a lot to him. (Closes: #963957)

 -- Thomas Goirand <zigo@debian.org>  Tue, 31 Mar 2020 10:25:37 +0200

openvswitch (2.13.0+dfsg1-10) unstable; urgency=medium

  * armhf: blacklist 918 1021 1057 unit tests.

 -- Thomas Goirand <zigo@debian.org>  Tue, 31 Mar 2020 00:26:15 +0200

openvswitch (2.13.0+dfsg1-9) unstable; urgency=medium

  * Blacklist 917. ofproto - asynchronous message control (OpenFlow 1.2) on
    mipsel arch.
  * Also add a testsuite list for ia64.

 -- Thomas Goirand <zigo@debian.org>  Mon, 30 Mar 2020 09:02:33 +0200

openvswitch (2.13.0+dfsg1-8) unstable; urgency=medium

  * Fixed mipsel64 -> mips64el in d/rules unit tests blacklisting.

 -- Thomas Goirand <zigo@debian.org>  Sun, 29 Mar 2020 22:01:31 +0200

openvswitch (2.13.0+dfsg1-7) unstable; urgency=medium

  * armhf: blacklist 26: bfd - check that BFD works together with RSTP.

 -- Thomas Goirand <zigo@debian.org>  Sun, 29 Mar 2020 21:14:17 +0200

openvswitch (2.13.0+dfsg1-6) unstable; urgency=medium

  * Never run unit test 20 which isn't deterministic.

 -- Thomas Goirand <zigo@debian.org>  Sun, 29 Mar 2020 18:15:56 +0200

openvswitch (2.13.0+dfsg1-5) unstable; urgency=medium

  * Blacklist failing tests on alpha (Closes: #880511).
  * More tests disabled for sparc64.
  * Uploading to unstable:
    - Fixes FTBFS (Closes: #954580).
    - Will migrate to testing, hopefully (Closes: #954367).
    - Fixes constant 100% CPU (Closes: #949845).

 -- Thomas Goirand <zigo@debian.org>  Sun, 22 Mar 2020 15:10:42 +0100

openvswitch (2.13.0+dfsg1-4) experimental; urgency=medium

  * Blacklist failing tests on HPPA (Closes: #880514).
  * Blacklist failing tests on sparc64 (Closes: #888905).
  * Replace the *.pid by a find command in logrotate file, so it's not failing
    if no pid file is present (Closes: #954202), thanks to Benjamin Drung for
    bug report and patch.

 -- Thomas Goirand <zigo@debian.org>  Sat, 21 Mar 2020 11:35:16 +0100

openvswitch (2.13.0+dfsg1-3) experimental; urgency=medium

  * More disabled tests for mips and mipsel64.
  * Removed patch files from d/patches.

 -- Thomas Goirand <zigo@debian.org>  Thu, 19 Mar 2020 12:57:17 +0100

openvswitch (2.13.0+dfsg1-2) experimental; urgency=medium

  * Blacklist some tests on some arch.

 -- Thomas Goirand <zigo@debian.org>  Wed, 18 Mar 2020 09:32:26 +0100

openvswitch (2.13.0+dfsg1-1) experimental; urgency=medium

  * New upstream release:
    - Works with dpdk 19.11 (Closes: #951699).
  * Commit some changes from the Ubuntu package to add more consistency.
  * Remove all the OVN packaging, as upstream has split its repository.

 -- Thomas Goirand <zigo@debian.org>  Tue, 17 Mar 2020 11:37:20 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-8) unstable; urgency=medium

  * Removed python:any dependency (Closes: #937216).

 -- Thomas Goirand <zigo@debian.org>  Mon, 20 Jan 2020 08:46:10 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-7) unstable; urgency=medium

  * Fix moving ovs-vswitchd (Closes: #943990).

 -- Thomas Goirand <zigo@debian.org>  Sat, 02 Nov 2019 20:01:23 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-6) unstable; urgency=medium

  * Fix again moving /usr/sbin/ovs-vswitchd away.

 -- Thomas Goirand <zigo@debian.org>  Fri, 01 Nov 2019 11:57:30 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-5) unstable; urgency=medium

  * Add || true when moving /usr/sbin/ovs-vswitchd so that it also works on
    arch all.

 -- Thomas Goirand <zigo@debian.org>  Fri, 01 Nov 2019 11:42:17 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-4) unstable; urgency=medium

  * Fix installing vtep/vtep-ctl (Closes: #866319).
  * Fix moving /usr/sbin/ovs-vswitchd around on non-dpdk arch, fixing FTBFS on
    these.
  * Removed SYSTEMCTL_SKIP_REDIRECT from:
    - openvswitch-switch init scripts (Closes: #910474.
    - ovn-central.init (Closes: #910472).
    - ovn-host.init (Closes: #910475).
    - ovn-controller-vtep.init (Closes: #910476).
  * Added mkdir -p /var/run in ovs startup (Closes: #930843).

 -- Thomas Goirand <zigo@debian.org>  Thu, 31 Oct 2019 11:38:08 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-3) unstable; urgency=medium

  [ Ondřej Nový ]
  * Run wrap-and-sort -bastk.
  * Use debhelper-compat instead of debian/compat.

  [ Thomas Goirand ]
  * Rebuilt source-only.

 -- Thomas Goirand <zigo@debian.org>  Tue, 29 Oct 2019 15:17:29 +0100

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-2) unstable; urgency=medium

  [ Jakub Safarik ]
  * Reintroduce the openvswitch-ipsec package.
  * Fix lintian errors:
    - openvswitch-switch: init.d-script-not-included-in-package.
    - openvswitch source: python-depends-but-no-python-helper.
    - openvswitch source: missing-notice-file-for-apache-license.

  [ Thomas Goirand ]
  * Fixed d/copyright (Closes: #942056).

 -- Thomas Goirand <zigo@debian.org>  Thu, 10 Oct 2019 09:13:37 +0200

openvswitch (2.11.0+2019.06.25+git.9ebe795035+ds1-1) experimental; urgency=medium

  * New upstream release.
  * Rebased patches.
  * Removed patch applied upstream:
    - ovs-dev-ovs-macros-Make-tests-log-how-long-they-waited-when-they-s...diff
  * Ran wrap-and-sort -bast.
  * Add dpdk support.
  * Converge with Ubuntu package.
  * Add 0001-acinclude-Also-use-LIBS-from-dpkg-pkg-config.patch.
  * Add disable-failing-ovn-tests.patch.
  * Removed Python 2 support (Closes: #937216).
  * Fixed debian/ifupdown.sh typo: ovs_vsctl -> ovs-vsctl.
  * Remove --parallel when calling dh.
  * Temporarily remove bugtools from openvswitch-common.install (it's
    currently broken, and need a fix).

 -- Thomas Goirand <zigo@debian.org>  Thu, 11 Jul 2019 22:31:36 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-13) unstable; urgency=medium

  * Some fixups in debian/ifupdown.sh to allow setting-up the MTU.
  * Document how to do Bond + Bridge + VLAN + MTU.
  * Correct dependency on python3-six instead of python-six (Closes: #931104).

 -- Thomas Goirand <zigo@debian.org>  Mon, 24 Jun 2019 08:53:33 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-12) unstable; urgency=medium

  * Add --may-exist in debian/ifupdown.sh as per upstream commit. Without it,
    networking service may fail (Closes: #926942).

 -- Thomas Goirand <zigo@debian.org>  Sun, 14 Apr 2019 00:25:19 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-11) unstable; urgency=medium

  * Removes network.service from openvswitch-switch.service to avoid a
    dependency loop in systemd, leading to removal of networking.service.
    Also use "ip link set DEVNAME up" instead of ifconfig, and runtime
    depend on iproute2.
    Thanks to Benjamin Drung for the bug report (Closes: #924562) and to
    Jonathan Dupart for the patch as a merge request in Salsa.

 -- Thomas Goirand <zigo@debian.org>  Sun, 31 Mar 2019 00:50:26 +0100

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-10) unstable; urgency=medium

  * Add remove-non-deterministic-tests.patch.

 -- Thomas Goirand <zigo@debian.org>  Fri, 14 Dec 2018 08:47:15 +0100

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-9) unstable; urgency=medium

  [ Michal Arbet ]
  * Fix load ovs stuff from /etc/network/interfaces (Closes: #910297)
  * Add me to uploaders field

 -- Michal Arbet <michal.arbet@ultimum.io>  Tue, 11 Dec 2018 11:23:11 +0100

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-8) unstable; urgency=medium

  * Add remove-yet-another-mips-failing-test.patch

 -- Thomas Goirand <zigo@debian.org>  Thu, 25 Oct 2018 11:10:50 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-7) unstable; urgency=medium

  * Blacklist "ofproto - asynchronous message control (OpenFlow 1.3)" which
    fails on Mips arch.

 -- Thomas Goirand <zigo@debian.org>  Mon, 22 Oct 2018 15:04:46 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-6) unstable; urgency=medium

  * Fixed files present in 2 binaries (Closes: #907952).

 -- Thomas Goirand <zigo@debian.org>  Mon, 15 Oct 2018 09:31:42 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-5) unstable; urgency=medium

  * Disable even more tests that are unfortunately failing under mipsel and
    mips64el.

 -- Thomas Goirand <zigo@debian.org>  Fri, 12 Oct 2018 12:00:36 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-4) unstable; urgency=medium

  [ Ondřej Nový ]
  * Running wrap-and-sort -bast

  [ Thomas Goirand ]
  * Add patch to remove tests failing in all mips arch and armel
    (Closes: #908978).
  * Fix python3 dependency in openvswitch-switch and openvswitch-vtep.

 -- Thomas Goirand <zigo@debian.org>  Wed, 10 Oct 2018 19:49:44 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-3) unstable; urgency=medium

  * Fixed files installed in both openvswitch-switch and openvswitch-common
    (Closes: #907952).

 -- Thomas Goirand <zigo@debian.org>  Mon, 10 Sep 2018 12:40:31 +0000

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-2) unstable; urgency=medium

  * Add upstream patch to investigate failures:
    - ovs-dev-ovs-macros-Make-tests-log-how-long-they-waited-when-they-su..diff

 -- Thomas Goirand <zigo@debian.org>  Wed, 05 Sep 2018 13:10:46 +0200

openvswitch (2.10.0+2018.08.28+git.8ca7c82b7d+ds1-1) unstable; urgency=medium

  * New upstream release:
    - Fix unit test with OpenSSL 1.1.1 (Closes: #900153).
  * Using +ds1 convention for upstream without debian folder tag.
  * Removed tests_stp_Use_long_warps_instead_of_multiple_calls.patch.
  * Rebased remove-tests-broken-in-mips64el-and-mipsel.patch.
  * Add py3-compat.patch, taken from Ubuntu.
  * Added disable-failed-tests.patch.
  * Add use-python3-m-sphinx-to-build-doc.patch
  * Fix debian/openstack-dev.install.

 -- Thomas Goirand <zigo@debian.org>  Fri, 31 Aug 2018 08:25:45 +0000

openvswitch (2.8.1+dfsg1-7) unstable; urgency=medium

  [ Ondřej Nový ]
  * d/control: Set Vcs-* to salsa.debian.org
  * d/changelog: Remove trailing whitespaces

  [ Thomas Goirand ]
  * Set team+openstack@tracker.debian.org as maintainer email.
  * Create folders before copying files into it, fixing FTBFS (Closes: #901112)

 -- Thomas Goirand <zigo@debian.org>  Mon, 18 Jun 2018 07:32:58 +0000

openvswitch (2.8.1+dfsg1-6) unstable; urgency=medium

  * Re-install systemd units to start OVS (Closes: #743635, #766435, #858418,
    #870001, #884319, #823532, #857178, #865616).

 -- Thomas Goirand <zigo@debian.org>  Mon, 29 Jan 2018 09:33:58 +0100

openvswitch (2.8.1+dfsg1-5) unstable; urgency=medium

  * Removed deprecated openvswitch-ipsec (Closes: #887031).
  * Document /etc/network/interfaces (Closes: #860786).
  * Remove bfd decay tests: they are failing on armhf, probably because the
    platform is too slow.
  * Add SYSTEMCTL_SKIP_REDIRECT=yes in openvswitch-switch.init.

 -- Thomas Goirand <zigo@debian.org>  Wed, 24 Jan 2018 09:20:12 +0100

openvswitch (2.8.1+dfsg1-4) unstable; urgency=medium

  * Remove tests broken in mips64el and mipsel (Closes: #880508, 880509).

 -- Thomas Goirand <zigo@debian.org>  Thu, 30 Nov 2017 11:37:36 +0100

openvswitch (2.8.1+dfsg1-3) unstable; urgency=medium

  * Remove .service files until better (Closes: #880498).

 -- Thomas Goirand <zigo@debian.org>  Wed, 01 Nov 2017 20:36:15 +0000

openvswitch (2.8.1+dfsg1-2) unstable; urgency=medium

  * Uploading to unstable.
  * Add tests_stp_Use_long_warps_instead_of_multiple_calls.patch, which
    according to Ben will fix some build failures.

 -- Thomas Goirand <zigo@debian.org>  Wed, 01 Nov 2017 01:32:47 +0000

openvswitch (2.8.1+dfsg1-1) experimental; urgency=medium

  * New upstream release (Closes: #878249):
    - Fixes CVE-2017-9214 (Closes: #863228).
    - Fixes CVE-2017-14970 (Closes: #877543).
    - Fixes CVE-2017-9263 (Closes: #863655).
    - Fixes CVE-2017-9264 (Closes: #863661).
    - Fixes CVE-2017-9265 (Closes: #863662).
  * Ran wrap-and-sort -bast.
  * Add libopenvswitch and libopenvswitch-dev.
  * Updated VCS URLs.
  * Switched to debhelper 10.
  * Added openstack-pkg-tools as build-depends.
  * Standards-Version is now 4.1.1.
  * Added dh-python as build-depends.
  * Added 2 debian/*.service files (Closes: #878757, #771507).
  * Added Python 3 support.
  * Added debian/README.source explaining why we're marking the version as
    +dfsg1 (ie: because we remove the upstream debian folder).
  * Removed patches.
  * Patch upstream Makefile.am to not include debian/automake.mk.
  * Remove openvswitch-test package.
  * Simplify packaging by installing all binaries in openvswitch-common.
  * Removed build-depends on dh-autoreconf, satisfied by debhelper >= 10.
  * Fixed build-depends on automake.
  * Fixed runtime depends on openvswitch-common in openvswitch-pki.
  * Removed openvswitch-test package, now provided by openvswitch-common.
  * Switch debian/copyright to parsable format.
  * Add export DEB_BUILD_MAINT_OPTIONS=hardening=+bindnow in debian/rules.
  * Removed ovn-docker package, now provided by openvswitch-common.
  * Manually correctly installs ovs-vsctl-bashcomp.bash.
  * Add myself as uploader.
  * Added a watch file.
  * Init scripts now sourcing LSB functions.
  * Change priority from extra to optional, as per policy 4.0.1.
  * Remove ovn-common package, now provided by openvswitch-common.
  * Change Maintainer: to be Debian OpenStack.

 -- Thomas Goirand <zigo@debian.org>  Fri, 20 Oct 2017 22:06:41 +0200

openvswitch (2.6.2~pre+git20161223-3) unstable; urgency=medium

  * Avoid installing ovs-vswitchd.conf.db.5 manpage into directory for
    language "db".  Closes: #850631.  Thanks to Michael Stapelberg
    <stapelberg@debian.org> for reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 09 Jan 2017 14:46:48 -0800

openvswitch (2.6.2~pre+git20161223-2) unstable; urgency=medium

  * Apply upstream patches:
    - c8ad60e debian: Also restrict ovn-docker package to Linux.
    - 90c25ef tests: Fix race in "ovn -- vtep: 3 HVs, 1 VIFs/HV, 1 GW, 1 LS".
    - 6fe9954 rconn: Avoid abort for ill-behaved remote.
  * Builds fine with OpenSSL 1.1.  Closes: #828478.
  * Upstream bug fixes from this and previous upload fix endianness issues.
    Closes: #840770.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 23 Dec 2016 16:35:11 -0800

openvswitch (2.6.2~pre+git20161223-1) unstable; urgency=medium

  * Bug fixes from upstream Git repository.
  * Fix arch-independent build.  Thanks to Santiago Vila <sanvila@unex.es>
    and nickcooper-zhangtonghao <nic@opencloud.tech> for the fix.  Closes:
    #831924.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 23 Dec 2016 09:43:56 -0800

openvswitch (2.6.1+git20161123-1) unstable; urgency=medium

  * New snapshot from the upstream Git repository.

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 23 Nov 2016 15:19:43 -0800

openvswitch (2.6.1-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - Fedora packaging:
     * A package upgrade does not automatically restart OVS service.
   - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 01 Nov 2016 15:40:17 -0700

openvswitch (2.6.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - First supported release of OVN.  See ovn-architecture(7) for more
     details.
   - ovsdb-server:
     * New "monitor_cond" "monitor_cond_update" and "update2" extensions to
       RFC 7047.
   - OpenFlow:
     * OpenFlow 1.3+ bundles are now supported for group mods as well as
       flow mods and port mods.  Both 'atomic' and 'ordered' bundle
       flags are supported for group mods as well as flow mods.
     * OpenFlow 1.1+ OFPT_QUEUE_GET_CONFIG_REQUEST now supports OFPP_ANY.
     * OpenFlow 1.4+ OFPMP_QUEUE_DESC is now supported.
     * OpenFlow 1.4+ OFPT_TABLE_STATUS is now supported.
     * New property-based packet-in message format NXT_PACKET_IN2 with support
       for arbitrary user-provided data and for serializing flow table
       traversal into a continuation for later resumption.
     * New extension message NXT_SET_ASYNC_CONFIG2 to allow OpenFlow 1.4-like
       control over asynchronous messages in earlier versions of OpenFlow.
     * OpenFlow 1.3 Extension 230, adding OpenFlow Bundles support, is
       now implemented.  Only flow mod and port mod messages are supported
       in bundles.
     * New OpenFlow extension NXM_NX_MPLS_TTL to provide access to MPLS TTL.
     * New output option, output(port=N,max_len=M), to allow truncating a
       packet to size M bytes when outputting to port N.
     * New command OFPGC_ADD_OR_MOD for OFPT_GROUP_MOD message that adds a
       new group or modifies an existing groups
     * The optional OpenFlow packet buffering feature is deprecated in
       this release, and will be removed in the next OVS release
       (2.7).  After the change OVS always sends the 'buffer_id' as
       0xffffffff in packet-in messages and will send an error
       response if any other value of this field is included in
       packet-out and flow mod sent by a controller.  Controllers are
       already expected to work properly in cases where the switch can
       not buffer packets, so this change should not affect existing
       users.
     * New OpenFlow extension NXT_CT_FLUSH_ZONE to flush conntrack zones.
   - Improved OpenFlow version compatibility for actions:
     * New OpenFlow extension to support the "group" action in OpenFlow 1.0.
     * OpenFlow 1.0 "enqueue" action now properly translated to OpenFlow 1.1+.
     * OpenFlow 1.1 "mod_nw_ecn" and OpenFlow 1.1+ "mod_nw_ttl" actions now
       properly translated to OpenFlow 1.0.
   - ovs-ofctl:
     * queue-get-config command now allows a queue ID to be specified.
     * '--bundle' option can now be used with OpenFlow 1.3 and with group mods.
     * New "bundle" command allows executing a mixture of flow and group mods
       as a single atomic transaction.
     * New option "--color" to produce colorized output for some commands.
     * New option '--may-create' to use OFPGC_ADD_OR_MOD in mod-group command.
   - IPFIX:
     * New "sampling_port" option for "sample" action to allow sampling
       ingress and egress tunnel metadata with IPFIX.
     * New ovs-ofctl commands "dump-ipfix-bridge" and "dump-ipfix-flow" to
       dump bridge IPFIX statistics and flow based IPFIX statistics.
     * New setting other-config:virtual_obs_id to add an arbitrary string
       to IPFIX records.
   - Linux:
     * New QoS type "linux-noop" that prevents Open vSwitch from trying to
       manage QoS for a given port (useful when other software manages QoS).
   - DPDK:
     * New option "n_rxq" for PMD interfaces.
       Old 'other_config:n-dpdk-rxqs' is no longer supported.
       Not supported by vHost interfaces. For them number of rx and tx queues
       is applied from connected virtio device.
     * New 'other_config:pmd-rxq-affinity' field for PMD interfaces, that
       allows to pin port's rx queues to desired cores.
     * New appctl command 'dpif-netdev/pmd-rxq-show' to check the port/rxq
       assignment.
     * Type of log messages from PMD threads changed from INFO to DBG.
     * QoS functionality with sample egress-policer implementation.
     * The mechanism for configuring DPDK has changed to use database
     * Sensible defaults have been introduced for many of the required
       configuration options
     * DB entries have been added for many of the DPDK EAL command line
       arguments. Additional arguments can be passed via the dpdk-extra
       entry.
     * Add ingress policing functionality.
     * PMD threads servicing vHost User ports can now come from the NUMA
       node that device memory is located on if CONFIG_RTE_LIBRTE_VHOST_NUMA
       is enabled in DPDK.
     * Basic connection tracking for the userspace datapath (no ALG,
       fragmentation or NAT support yet)
     * Support for DPDK 16.07
     * Optional support for DPDK pdump enabled.
     * Jumbo frame support
     * Remove dpdkvhostcuse port type.
     * OVS client mode for vHost and vHost reconnect (Requires QEMU 2.7)
   - Increase number of registers to 16.
   - ovs-benchmark: This utility has been removed due to lack of use and
     bitrot.
   - ovs-appctl:
     * New "vlog/close" command.
   - ovs-ctl:
     * Added the ability to selectively start the forwarding and database
       functions (ovs-vswitchd and ovsdb-server, respectively).
   - ovsdb-server:
     * Remove max number of sessions limit, to enable connection scaling
       testing.
   - python:
     * Added support for Python 3.4+ in addition to existing support
       for 2.7+.
   - SELinux:
     * Introduced SELinux policy package.
   - Datapath Linux kernel compatibility.
     * Dropped support for kernel older than 3.10.
     * Removed VLAN splinters feature.
     * Support for truncate action.
     * Datapath supports kernel upto 4.6.
   - Tunnels:
     * Flow based tunnel match and action can be used for IPv6 address using
       tun_ipv6_src, tun_ipv6_dst fields.
     * Added support for IPv6 tunnels, for details checkout FAQ.
     * Deprecated support for IPsec tunnels ports.
   - A wrapper script, 'ovs-tcpdump', to easily port-mirror an OVS port and
     watch with tcpdump
   - Introduce --no-self-confinement flag that allows daemons to work with
     sockets outside their run directory.
   - ovs-pki: Changed message digest algorithm from SHA-1 to SHA-512 because
     SHA-1 is no longer secure and some operating systems have started to
     disable it in OpenSSL.
   - Add 'mtu_request' column to the Interface table. It can be used to
     configure the MTU of non-internal ports.

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 27 Sep 2016 10:13:47 -0700

openvswitch (2.5.1~pre+git20160626-2) unstable; urgency=medium

  * debian/control: Change build dependency from python-twisted-conch to
    python-twisted, for two reasons.  First, the former is just a
    documentation package and is going to be removed.  Second, the former
    depends on python-crypto, which according to buildd.debian.org is
    uninstallable except on i386 due to a long chain of dependencies.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 01 Jul 2016 15:05:32 -0700

openvswitch (2.5.1~pre+git20160626-1) unstable; urgency=low

  * New upstream release.

 -- Ben Pfaff <pfaffben@debian.org>  Sun, 26 Jun 2016 15:13:56 -0700

openvswitch (2.5.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - Dropped support for Python older than version 2.7.  As a consequence,
     using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
     have Python 2.4) requires first installing Python 2.7.
   - OpenFlow:
     * Group chaining (where one OpenFlow group triggers another) is
       now supported.
     * OpenFlow 1.4+ "importance" is now considered for flow eviction.
     * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
     * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
     * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
     * Allow modifying the ICMPv4/ICMPv6 type and code fields.
     * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
       now implemented.
   - ovs-ofctl:
     * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
   - Tunnels:
     * Geneve tunnels can now match and set options and the OAM bit.
     * The nonstandard GRE64 tunnel extension has been dropped.
   - Support Multicast Listener Discovery (MLDv1 and MLDv2).
   - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
   - sFlow agent now reports tunnel and MPLS structures.
   - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile
     targets to run a new system testsuite.  These tests can be run inside
     a Vagrant box.  See INSTALL.md for details
   - Mark --syslog-target argument as deprecated.  It will be removed in
     the next OVS release.
   - Added --user option to all daemons
   - Add support for connection tracking through the new "ct" action
     and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields.  Only
     available on Linux kernels with the connection tracking module loaded.
   - Add experimental version of OVN.  OVN, the Open Virtual Network, is a
     system to support virtual network abstraction.  OVN complements the
     existing capabilities of OVS to add native support for virtual network
     abstractions, such as virtual L2 and L3 overlays and security groups.
   - RHEL packaging:
     * DPDK ports may now be created via network scripts (see README.RHEL).
   - DPDK:
     * Requires DPDK 2.2
     * Added multiqueue support to vhost-user
     * Note: QEMU 2.5+ required for multiqueue support
   - SELinux:
     * Introduced SELinux policy package.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 26 Feb 2016 17:23:21 -0700

openvswitch (2.4.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - Flow table modifications are now atomic, meaning that each packet
     now sees a coherent version of the OpenFlow pipeline.  For
     example, if a controller removes all flows with a single OpenFlow
     "flow_mod", no packet sees an intermediate version of the OpenFlow
     pipeline where only some of the flows have been deleted.
   - Added support for SFQ, FQ_CoDel and CoDel qdiscs.
   - Add bash command-line completion support for ovs-vsctl Please check
     utilities/ovs-command-compgen.INSTALL.md for how to use.
   - The MAC learning feature now includes per-port fairness to mitigate
     MAC flooding attacks.
   - New support for a "conjunctive match" OpenFlow extension, which
     allows constructing OpenFlow matches of the form "field1 in
     {a,b,c...} AND field2 in {d,e,f...}" and generalizations.  For details,
     see documentation for the "conjunction" action in ovs-ofctl(8).
   - Add bash command-line completion support for ovs-appctl/ovs-dpctl/
     ovs-ofctl/ovsdb-tool commands.  Please check
     utilities/ovs-command-compgen.INSTALL.md for how to use.
   - The "learn" action supports a new flag "delete_learned" that causes
     the learned flows to be deleted when the flow with the "learn" action
     is deleted.
   - Basic support for the Geneve tunneling protocol. It is not yet
     possible to generate or match options. This is planned for a future
     release. The protocol is documented at
     http://tools.ietf.org/html/draft-gross-geneve-00
   - The OVS database now reports controller rate limiting statistics.
   - sflow now exports information about LACP-based bonds, port names, and
     OpenFlow port numbers, as well as datapath performance counters.
   - ovs-dpctl functionality is now available for datapaths integrated
     into ovs-vswitchd, via ovs-appctl.  Some existing ovs-appctl
     commands are now redundant and will be removed in a future
     release.  See ovs-vswitchd(8) for details.
   - OpenFlow:
     * OpenFlow 1.4 bundles are now supported for flow mods and port
       mods.  For flow mods, both 'atomic' and 'ordered' bundle flags
       are trivially supported, as all bundled messages are executed
       in the order they were added and all flow table modifications
       are now atomic to the datapath.  Port mods may not appear in
       atomic bundles, as port status modifications are not atomic.
     * IPv6 flow label and neighbor discovery fields are now modifiable.
     * OpenFlow 1.5 extended registers are now supported.
     * The OpenFlow 1.5 actset_output field is now supported.
     * OpenFlow 1.5 Copy-Field action is now supported.
     * OpenFlow 1.5 masked Set-Field action is now supported.
     * OpenFlow 1.3+ table features requests are now supported (read-only).
     * Nicira extension "move" actions may now be included in action sets.
     * "resubmit" actions may now be included in action sets.  The resubmit
       is executed last, and only if the action set has no "output" or "group"
       action.
     * OpenFlow 1.4+ flow "importance" is now maintained in the flow table.
     * A new Netronome extension to OpenFlow 1.5+ allows control over the
       fields hashed for OpenFlow select groups.  See "selection_method" and
       related options in ovs-ofctl(8) for details.
   - ovs-ofctl has a new '--bundle' option that makes the flow mod commands
     ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows')
     use an OpenFlow 1.4 bundle to operate the modifications as a single
     atomic transaction.  If any of the flow mods in a transaction fail, none
     of them are executed.  All flow mods in a bundle appear to datapath
     lookups simultaneously.
   - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow
     mods as an input by allowing the flow specification to start with an
     explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict'
     keyword.  A missing keyword is treated as 'add', so this is fully
     backwards compatible.  With the new '--bundle' option all the flow mods
     are executed as a single atomic transaction using an OpenFlow 1.4 bundle.
   - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
     MD5 is no longer secure and some operating systems have started to disable
     it in OpenSSL.
   - ovsdb-server: New OVSDB protocol extension allows inequality tests on
     "optional scalar" columns.  See ovsdb-server(1) for details.
   - ovs-vsctl now permits immutable columns in a new row to be modified in
     the same transaction that creates the row.
   - test-controller has been renamed ovs-testcontroller at request of users
     who find it useful for testing basic OpenFlow setups.  It is still not
     a necessary or desirable part of most Open vSwitch deployments.
   - Support for travis-ci.org based continuous integration builds has been
     added. Build failures are reported to build@openvswitch.org. See INSTALL.md
     file for additional details.
   - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004).
     The implementation has been tested successfully against the Ixia Automated
     Network Validation Library (ANVL).
   - Stats are no longer updated on fake bond interface.
   - Keep active bond slave selection across OVS restart.
   - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
     containers. If and when there is a native integration of Open vSwitch
     with Docker, the wrapper script will be retired.
   - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported
     protocols. This is generic tunneling mechanism for userspace datapath.
   - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3)
   - Support for Linux kernels up to 4.0.x
   - The documentation now use the term 'destination' to mean one of syslog,
     console or file for vlog logging instead of the previously used term
     'facility'.
   - Support for VXLAN Group Policy extension
   - Initial support for the IETF Auto-Attach SPBM draft standard. This
     contains rudimentary support for the LLDP protocol as needed for
     Auto-Attach.
   - The default OpenFlow and OVSDB ports are now the IANA-assigned
     numbers.  OpenFlow is 6653 and OVSDB is 6640.
   - Support for DPDK vHost.
   - Support for outer UDP checksums in Geneve and VXLAN.
   - The kernel vports with dependencies are no longer part of the overall
     openvswitch.ko but built and loaded automatically as individual kernel
     modules (vport-*.ko).
   - Support for STT tunneling.
   - Support to configure method (--syslog-method argument) that determines
     how daemons will talk with syslog.
   - Support for "ovs-appctl vlog/list-pattern" command that lets to query
     logging message format for each destination.
   - GRE64 and ipsec_gre64 tunnel protocol is deprecated and will be removed
     from OVS v2.5 release.
   * The openvswitch-testcontroller package is new.  It reintroduces the
     simple OpenFlow controller that was packaged with Open vSwitch prior to
     version 2.1, at request of users who find it useful for testing basic
     OpenFlow setups.  It is still not a necessary or desirable part of most
     Open vSwitch deployments.

 -- Open vSwitch team <dev@openvswitch.org>  Thu, 20 Aug 2015 17:23:43 -0700

openvswitch (2.3.0+git20140819-4) unstable; urgency=high

  * Apply patch to fix a buffer overflow for crafted MPLS packets.  Fixes
    CVE-2016-2074.  Thanks to the upstream reporters of this
    vulnerability, Kashyap Thimmaraju
    <kashyap.thimmaraju@sec.t-labs.tu-berlin.de> and Bhargava Shastry
    <bshastry@sec.t-labs.tu-berlin.de>.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 28 Mar 2016 17:05:38 -0700

openvswitch (2.3.0+git20140819-3) unstable; urgency=medium

  * Don't depened on $RUNLEVEL at startup to create bridges.
    This should allow Open vSwitch configuration through
    /etc/network/interfaces where $RUNLEVEL is not set.
    This change is upstream commit 238324bd73b031635
    ("debian: Don't depened on $RUNLEVEL at startup to create bridges.")
    Closes: #771863
  *

 -- Simon Horman <horms@debian.org>  Fri, 19 Dec 2014 10:54:08 +0900

openvswitch (2.3.0+git20140819-2) unstable; urgency=low

  * debian/rules: Rerun checks on tests that fail the first time.  Skip
    tests 711, 712, and 713 that seem to fail due to races on buildds.
  * debian/patches/cfm-avoid-long-delay: Upstream patch to avoid
    test failures in CFM tests due to "long delay" log messages at WARN level.
  * debian/patches/ovs-appctl-log-options.patch,
    debian/patches/disable-poll-loop-logging-for-long-output.patch:
    Upstream patches to avoid test failures in tests that generate a ton
    of output.

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 20 Aug 2014 08:31:11 -0700

openvswitch (2.3.0+git20140819-1) unstable; urgency=low

  * New upstream release:
   - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
     ovs-vswitchd.
   - Linux kernel datapath now has an exact match cache optimizing the
     flow matching process.
   - Datapath flows now have partially wildcarded tranport port field
     matches.  This reduces userspace upcalls, but increases the
     number of different masks in the datapath.  The kernel datapath
     exact match cache removes the overhead of matching the incoming
     packets with the larger number of masks, but when paired with an
     older kernel module, some workloads may perform worse with the
     new userspace.
  * Removed datapath packages because Linux 3.16 has adequate built-in
    support.  Closes: #740983.
    - debian/control: Remove datapath package references.  Add build
      dependency on dh-autoreconf.
    - debian/rules: Don't build datapath packages.
    - debian/openvswitch-datapath-*: Removed.
    - debian/control.modules.in: Removed.
    - debian/dkms.conf.in: Removed.
    - debian/rules.modules: Removed.
    - debian/openvswitch-switch.README.Debian: Removed references to kernel
      packages.
    - debian/openvswitch-switch.init: Removed references to kernel packages.
    - debian/automake.mk: Remov references to deleted files.
    - debian/rules: Adopt use of dh-autoreconf.

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 19 Aug 2014 08:19:21 -0700

openvswitch (2.2.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - Internal ports are no longer brought up by default, because it
     should be an administrator task to bring up devices as they are
     configured properly.
   - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
     bridge.
   - The "ovsdbmonitor" graphical tool has been removed, because it was
     poorly maintained and not widely used.
   - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
     controllers against Open vSwitch.  See INSTALL for details.
   - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
   - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
     log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
     instead.
   - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
     tunnel API for GRE and VXLAN.
   - Added experimental DPDK support.
   - Added support for custom vlog patterns in Python

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 19 Mar 2014 16:08:38 -0700

openvswitch (2.1.0+git20140411-3) unstable; urgency=low

  * debian/rules: Disable some tests that tend to fail on Debian buildds
    due to race conditions.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 13 Jun 2014 06:07:31 -0700

openvswitch (2.1.0+git20140411-2) unstable; urgency=low

  * debian/openvswitch-switch.postinst: Add back mysteriously deleted
    "mkdir" line.  Closes: #744769.  Thanks to Joshua Powers for reporting
    this bug.
  * debian/rules: Try rechecking in serial any tests that fail in
    parallel, as an experiment to see whether this fixes remaining buildd
    test failures.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 14 Apr 2014 08:29:33 -0700

openvswitch (2.1.0+git20140411-1) unstable; urgency=low

  * New upstream release:
    - Removed ovsdbmonitor package.  Closes: #744136.
    - Fix misaligned data accesses that caused test failures.
  * tests/ofproto-macros.at: Disable scanning logs for WARN and ERR messages,
    as an experiment to see whether this fixes all the buildd test failures.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 11 Apr 2014 08:35:10 -0700

openvswitch (2.1.0+git20140325-1) unstable; urgency=low

  * New upstream release.
    - Included kernel module builds against Linux 3.11.  Closes: #732260.
    - Log rotation bug fixed.  Closes: #729304.
    - Bridge compatibility feature removed.  Closes: #680538, #681954.
    - Controller package removed.  Closes: #731133.
  * Shut down OVS after libvirt guests to allow those guests to remove
    their interfaces gracefully. Closes: #701760.  Reported by Ernesto
    Domato <edomat@gmail.com>.  Fix from Lukasz Szotek
    <szotman@gmail.com>.
  * debian/control: Depend on kmod instead of module-init-tools.  Closes:
    #733696.  Reported by md@Linux.IT (Marco d'Itri).

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 31 Mar 2014 09:31:10 -0700

openvswitch (1.9.3+git20131029-1) unstable; urgency=low

  * New upstream release.
    - Fixes opening Unix sockets with very long names from Python.

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 29 Oct 2013 08:31:55 -0700

openvswitch (1.9.3+git20131028-1) unstable; urgency=low

  * New upstream release.
    - Fixes "make check" with non-ASCII characters in present working
      directory.  Closes: #719736.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 28 Oct 2013 08:40:31 -0700

openvswitch (1.9.3+git20131021-1) unstable; urgency=low

  * New upstream version:
    - Fixes unaligned access issues in bug #719736.
    - Other bug fixes.
  * Other half of bug #719736 has probably not been addressed.  I don't
    understand it and want to see if it recurs in the autobuilders with
    the unaligned accesses fixed.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 21 Oct 2013 08:53:11 -0700

openvswitch (1.9.3-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Thu, 29 Aug 2013 17:02:33 -0700

openvswitch (1.9.2+git20130813-1) unstable; urgency=low

  * New upstream version.  Closes: #701758.
    - debian/patches: All patches dropped because they have been
      incorporated upstream.
    - Supports kernels up to 3.8.  Closes: #710125.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 07 Jun 2013 14:15:01 -0700

openvswitch (1.9.2-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 05 Apr 2013 18:37:19 -0700

openvswitch (1.9.1-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 14 Mar 2013 17:27:19 -0700

openvswitch (1.9.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Datapath:
      - Support for ipv6 set action.
      - SKB mark matching and setting.
      - support for Linux kernels up to 3.8
    - FreeBSD is now a supported platform, thanks to code contributions from
      Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
    - ovs-bugtool: New --ovs option to report only OVS related information.
    - New %t and %T log escapes to identify the subprogram within a
      cooperating group of processes or threads that emitted a log message.
      The default log patterns now include this information.
    - OpenFlow:
      - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
        fields in IPv6 neighbor discovery messages, and IPv6 flow label.
      - Adds support for writing to the metadata field for a flow.
    - Tunneling:
      - The tunneling code no longer assumes input and output keys are
        symmetric.  If they are not, PMTUD needs to be disabled for
        tunneling to work. Note this only applies to flow-based keys.
      - New support for a nonstandard form of GRE that supports a 64-bit key.
      - Tunnel Path MTU Discovery default value was set to 'disabled'.
        This feature is deprecated and will be removed soon.
      - Tunnel header caching removed.
    - ovs-ofctl:
      - Commands and actions that accept port numbers now also accept keywords
        that represent those ports (such as LOCAL, NONE, and ALL).  This is
        also the recommended way to specify these ports, for compatibility
        with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
        for these ports for different purposes).
    - ovs-dpctl:
      - Support requesting the port number with the "port_no" option in
        the "add-if" command.
    - ovs-pki: The "online PKI" features have been removed, along with
      the ovs-pki-cgi program that facilitated it, because of some
      alarmist insecurity claims.  We do not believe that these claims
      are true, but because we do not know of any users for this
      feature it seems better on balance to remove it.  (The ovs-pki-cgi
      program was not included in distribution packaging.)
    - ovsdb-server now enforces the immutability of immutable columns.  This
      was not enforced in earlier versions due to an oversight.
    - The following features are now deprecated.  They will be removed no
      earlier than February 2013.  Please email dev@openvswitch.org with
      concerns.
        - Bridge compatibility.
        - Stable bond mode.
        - The autopath action.
        - Interface type "null".
        - Numeric values for reserved ports (see "ovs-ofctl" note above).
        - Tunnel Path MTU Discovery.
        - CAPWAP tunnel support.
    - The data in the RARP packets can now be matched in the same way as the
      data in ARP packets.

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 26 Feb 2013 11:23:19 -0700

openvswitch (1.8.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    *** Internal only release ***
    - New FAQ.  Please send updates and additions!
    - Authors of controllers, please read the new section titled "Action
      Reproduction" in DESIGN, which describes an Open vSwitch change in
      behavior in corner cases that may affect some controllers.
    - ovs-l3ping:
        - A new test utility that can create L3 tunnel between two Open
          vSwitches and detect connectivity issues.
    - ovs-ofctl:
        - New --sort and --rsort options for "dump-flows" command.
        - "mod-port" command can now control all OpenFlow config flags.
    - OpenFlow:
      - Allow general bitwise masking for IPv4 and IPv6 addresses in
        IPv4, IPv6, and ARP packets.  (Previously, only CIDR masks
        were allowed.)
      - Allow support for arbitrary Ethernet masks.  (Previously, only
        the multicast bit in the destination address could be individually
        masked.)
      - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
      - The OFPST_QUEUE request now reports an error if a specified port or
        queue does not exist, or for requests for a specific queue on all
        ports, if the specified queue does not exist on any port.  (Previous
        versions generally reported an empty set of results.)
      - New "flow monitor" feature to allow controllers to be notified of
        flow table changes as they happen.
    - Additional protocols are not mirrored and dropped when forward-bpdu is
      false.  For a full list, see the ovs-vswitchd.conf.db man page.
    - Open vSwitch now sends RARP packets in situations where it previously
      sent a custom protocol, making it consistent with behavior of QEMU and
      VMware.
    - All Open vSwitch programs and log files now show timestamps in UTC,
      instead the local timezone, by default.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 16 Jul 2012 16:44:52 +0900

openvswitch (1.7.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - kernel modules are renamed. openvswitch_mod.ko is now
      openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
    - Increased the number of NXM registers to 8.
    - Added ability to configure dscp setting for manager and controller
      connections.  By default, these connections have a DSCP value of
      Internetwork Control (0xc0).
    - Added the granular link health statistics, 'cfm_health', to an
      interface.
    - OpenFlow:
        - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
        - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
          multipart messages.
    - ovs-ofctl:
        - Added the "dump-ports-desc" command to retrieve port
          information using the new port description multipart messages.
    - ovs-test:
        - Added support for spawning ovs-test server from the client.
        - Now ovs-test is able to automatically create test bridges and ports.
    - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
    - Tripled flow setup performance.
    - The "coverage/log" command previously available through ovs-appctl
      has been replaced by "coverage/show".  The new command replies with
      coverage counter values, instead of logging them.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jul 2012 17:23:57 +0900

openvswitch (1.6.1-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Allow OFPP_CONTROLLER as the in_port for packet-out messages.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 25 Jun 2012 13:52:17 +0900

openvswitch (1.6.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - bonding
        - LACP bonds no longer fall back to balance-slb when negotiations fail.
          Instead they drop traffic.
        - The default bond_mode changed from SLB to active-backup, to protect
          unsuspecting users from the significant risks of SLB bonds (which are
          documented in vswitchd/INTERNALS).
        - Load balancing can be disabled by setting the bond-rebalance-interval
          to zero.
    - OpenFlow:
        - Added support for bitwise matching on TCP and UDP ports.
          See ovs-ofctl(8) for more information.
        - NXM flow dumps now include times elapsed toward idle and hard
          timeouts.
        - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
          controllers more precise control over which OpenFlow messages they
          receive asynchronously.
        - New "fin_timeout" action.
        - Added "fin_timeout" support to "learn" action.
    - The default MAC learning timeout has been increased from 60 seconds
      to 300 seconds.  The MAC learning timeout is now configurable.
    - When QoS settings for an interface do not configure a default queue
      (queue 0), Open vSwitch now uses a default configuration for that
      queue, instead of dropping all packets as in previous versions.
    - Logging to console and file will have UTC timestamp as a default for all
      the daemons. An example of the default format is 2012-01-27T16:35:17Z.
      ovs-appctl can be used to change the default format as before.
    - New support for limiting the number of flows in an OpenFlow flow
      table, with configurable policy for evicting flows upon
      overflow.  See the Flow_Table table in ovs-vswitch.conf.db(5)
      for more information.
    - New "enable-async-messages" column in the Controller table.  If set to
      false, OpenFlow connections to the controller will initially have all
      asynchronous messages disabled, overriding normal OpenFlow behavior.
    - ofproto-provider interface:
        - "struct rule" has a new member "used" that ofproto implementations
          should maintain by updating with ofproto_rule_update_used().
    - ovsdb-client:
        - The new option --timestamp causes the "monitor" command to print
          a timestamp with every update.
    - CFM module CCM broadcasts can now be tagged with an 802.1p priority.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 24 Feb 2012 11:12:48 +0900

openvswitch (1.5.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
        - Added support for querying, modifying, and deleting flows
          based on flow cookie when using NXM.
        - Added new NXM_PACKET_IN format.
    - ovs-ofctl:
        - Added daemonization support to the monitor and snoop commands.
    - ovs-vsctl:
        - The "find" command supports new set relational operators
          {=}, {!=}, {<}, {>}, {<=}, and {>=}.
    - ovsdb-tool now uses the typical database and schema installation
      directories as defaults.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 01 June 2012 13:06:00 +0900

openvswitch (1.4.2+git20120612-9) unstable; urgency=low

  * Apply bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch to
    allow use of the openvswitch kernel module integrated into 3.3 and
    later.  Closes: #684057.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 06 Aug 2012 16:59:01 -0700

openvswitch (1.4.2+git20120612-8) unstable; urgency=low

  * Apply further patches to fix bugs resulting from moving
    /etc/openvswitch/conf.db to /var/lib/openvswitch in -7.

    This required applying the following bug fix patches:

    bug-681880-3-Make-the-location-of-the-database-separately-configu.patch
    bug-681880-4-tests-Slightly-generalize-utility-function-tests.patch
    bug-681880-5-util-New-function-follow_symlinks.patch
    bug-681880-6-lockfile-Be-more-forgiving-about-lockfiles-for-symli.patch
    bug-681880-7-ovsdb-Do-not-replace-symlinks-by-regular-files-durin.patch
    bug-681880-8-Fix-a-typo-in-commit-f973f2af2.patch
    bug-681880-9-dirs-dbdir-default-must-be-based-on-sysconfdir.patch

  * debian/rules: Configure /var/lib/openvswitch as the database directory
    instead of working through symlinks.  (The symlinks are still created
    for compatibility with people and existing software that are
    accustomed to seeing the database in its original location, but the
    Debian packages themselves never use the symlinks.)

  * debian/openvswitch-switch.postrm: Also remove
    /ec/openvswitch/system-id.conf and conf.db backups on purge.

  * utilities/ovs-pki.in: Use mode 0700 instead of 0733 for
    openvswitch-pki "incoming" directory, by applying
    bug-683665-use-mode-700-for-pki-incoming-dir.patch.  See the patch for
    complete rationale.  Closes: #683665.  Thanks to Andreas Beckmann
    <debian@abeckmann.de> for reporting this bug.

  * debian/openvswitch-pki.postinst: Change mode of existing "incoming"
    directories to 0700 at configure time (see above).

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 01 Aug 2012 11:20:21 -0700

openvswitch (1.4.2+git20120612-7) unstable; urgency=low

  * Move /etc/openvswitch/conf.db to /var/lib/openvswitch, using symlinks.
    Closes: #681880.  Thanks to Bastian Blank <waldi@debian.org> for
    reporting this bug.

    This required applying the following bug fix patches:

    bug-681880-1-lockfile-Fix-hang-locking-through-a-dangling-symlink.patch
    bug-681880-2-ovsdb-Make-ovsdb-tool-create-work-through-a-dangling.patch

  * Start the rest of OVS if bridge compatibility is enabled but the
    kernel bridge module cannot be loaded.  Closes: #681955.  Thanks to
    Bastian Blank <waldi@debian.org> for reporting this bug.

    This was fixed by applying the following bug fix patch:

    bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 27 Jul 2012 12:36:03 -0700

openvswitch (1.4.2+git20120612-6) unstable; urgency=low

  * utilities/automake.mk: Fix duplicate mention of ovs-vsctl in
    bin_PROGRAMS and bin_SCRIPTS; it should only have been in the former.
    Closes: #682384.  Thanks to Bastian Blank <waldi@debian.org> for
    reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 23 Jul 2012 09:46:41 -0700

openvswitch (1.4.2+git20120612-5) unstable; urgency=low

  * debian/openvswitch-controller.postrm: Remove configuration files in
    /etc/openvswitch-controller on purge.  Closes: #682187.  Thanks to
    Andreas Beckmann <debian@abeckmann.de> for reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 20 Jul 2012 22:33:19 -0700

openvswitch (1.4.2+git20120612-4) unstable; urgency=low

  * debian/openvswitch-switch.init: Do not modify iptables rules.  Closes:
    #680537.  Thanks to Bastian Blank <waldi@debian.org> for reporting
    this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 16 Jul 2012 12:56:37 -0700

openvswitch (1.4.2+git20120612-3) unstable; urgency=low

  * debian/control: Add "netbase" dependency to ensure that /etc/protocols
    is available.  Closes: #680537.  Thanks to Bastian Blank <waldi@debian.org>
    for reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 09 Jul 2012 09:50:03 -0700

openvswitch (1.4.2+git20120612-2) unstable; urgency=low

  * Apply upstream commit that enables DKMS to automatically build for the
    running kernel, which seems to be common practice in DMS packaging
    (launchpad bug #962189)

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 19 Jun 2012 09:40:53 -0700

openvswitch (1.4.2+git20120612-1) unstable; urgency=low

  * New upstream version fixing the following bugs:
    o Crash fixes:
      - ofproto: Fix use after free in ofoperation_complete().
      - odp-util: Update ODPUTIL_FLOW_KEY_BYTES for current kernel flow format.
      - datapath: Check correct return value from skb_gso_segment().
    o Possible serious malfunctions:
      - dpif-netdev: allow for proper destruction of netdev datapaths.
      - datapath: Validation of IPv6 set port action uses IPv4 header.
    o Rare annoying corner case:
      - odp-util: Fix parsing of actions encapsulated within "sample" actions.
    o Bugs with unknown impact:
      - Correctly set destination MAC in mf_set_flow_value().
    o OpenFlow controller compatibility:
      - Allow OFPP_CONTROLLER as the in_port for packet-out messages.

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 12 Jun 2012 10:25:08 -0700

openvswitch (1.4.0+git20120426-1) unstable; urgency=low

  * New upstream release fixing the following bugs:
    o Broken log rotation.
    o Use-after-free error when ports disappear.
    o Minor memory leaks.
    o Testsuite failures on big-endian architectures.

 -- Ben Pfaff <pfaffben@debian.org>  Thu, 26 Apr 2012 13:46:55 -0700

openvswitch (1.4.0+git20120321-1) unstable; urgency=low

  * New upstream version including:
    o Features:
      - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
      - vswitchd: Make the MAC entry aging time configurable.
      - mac-learning: Increase MAC learning timeout to 300 seconds.
    o Bug fixes:
      - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
        queues.
      - netlink-socket: Increase Netlink socket receive buffer size.
      - ofproto: Fix code that keeps track of MTU.
      - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
      - bond: Incorrectly reported an error in appctl.
      - socket-util: Unlink Unix domain sockets that bind but fail to connect.
      - bridge: Remove unwanted ports at time of ofproto creation.
      - dpif-linux: Make dpif_linux_port_query_by_name() query only one
        datapath.
      - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
      - configure: Try to extract kernel source directory from build Makefile.
      - vswitchd: Always configure a default queue for QoS.
      - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
      - sflow_agent: Use snprintf() in place of sprintf().
    o Packaging:
      - Move PKI directory to FHS-compliant location.  Closes: #661090.
        Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
        this bug.
      - Use a different way to avoid failing install without kernel module.
      - Avoid unit test failure when doing "unofficial" builds.
      - Bump standards-version to 3.9.3.
      - Remove some useless files from the dkms package.
      - Clean .pyc files in "clean" target.
      - Remove po-debconf build dependency.
      - Build-depend on python-all to pull in all Python versions.
      - Add missing ${python:Depends} to openvswitch-test package.
      - Improve long descriptions so as to better describe the packages.
      - Bump debhelper compat level to 8 and make build-depends consistent.
      - Fix exit status of openvswitch-switch init script "status" command.
      - Use provided kernel source dir instead of host kernel version.
      - Do not run "make" if "configure" fails during DKMS build.
      - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
      - Fix dependencies for openvswitch-datapath-dkms package.
      - Don't install Python modules for obsolete Python versions.
      - Add dependency on ${misc:Depends} to openvswitch-test
    o Documentation improvements:
      - ovsdb-doc: Use minus sign in negative numbers in nroff output.
      - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
        hyphen.
      - ovsdb-doc: Put NAME section into generated manpage.
      - Fix typo in manpage.
      - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
      - netdev: Fix typo in error message.
      - INSTALL.Linux: minor typo

  * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
    of the packaging fixes listed above.

  * This version fixes most of the lintian errors described in bug
    #663051, but a few remain, so this upload does not close that bug.  I
    believe that this upload should be suitable for downgrading that bug's
    severity.

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 21 Mar 2012 10:00:28 -0700

openvswitch (1.4.0-2+nmu1) unstable; urgency=low

  * Non maintainer upload.
  * Removes all patches in debian/patches, because they are patching stuff
  inconditionally in debian/*, and this should be applied by default.
  * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
  the kernel module builds as expected (Closes: #659685).

 -- Thomas Goirand <zigo@debian.org>  Thu, 08 Mar 2012 08:46:24 +0000

openvswitch (1.4.0-2) unstable; urgency=low

  * Use explicit DKMS variable for kernel source directory
    - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
    - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
    - 0001-debian-Use-provided-kernel-source-dir.patch
    - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
    - (closes: #659685)
  * Don't install Python modules for obsolete Python versions
    - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch

 -- Simon Horman <horms@debian.org>  Tue, 14 Feb 2012 11:43:13 +0900

openvswitch (1.4.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Compatible with Open vSwitch kernel module included in Linux 3.3.
    - New "VLAN splinters" feature to work around buggy device drivers
      in old Linux versions.  (This feature is deprecated.  When
      broken device drivers are no longer in widespread use, we will
      delete this feature.)  See ovs-vswitchd.conf.db(5) for more
      information.
    - OpenFlow:
       - Added ability to match on IPv6 flow label through NXM.
       - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
       - Added ability to match on TTL in IPv4 and IPv6 through NXM.
       - Added ability to modify ECN bits in IPv4.
       - Added ability to modify TTL in IPv4.
    - ovs-vswitchd:
       - Don't require the "normal" action to use mirrors.  Traffic will
         now be properly mirrored for any flows, regardless of their
         actions.
       - Track packet and byte statistics sent on mirrors.
    - ovs-appctl:
      - New "fdb/flush" command to flush bridge's MAC learning table.
    - ovs-test:
      - A new distributed testing tool that allows one to diagnose performance
        and connectivity issues. This tool currently is not included in RH or
        Xen packages.
    - RHEL packaging now supports integration with Red Hat network scripts.
    - Debian: Depend on python (>= 2.7) | python-argparse instead of
              python-argparse to avoid pulling in python2.6
              (closes: #653645)

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jan 2012 23:36:00 +0000

openvswitch (1.3.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
      - Added an OpenFlow extension which allows the "output" action to accept
        NXM fields.
      - Added an OpenFlow extension for flexible learning.
      - Bumped number of NXM registers from four to five.
    - ovs-appctl:
      - New "version" command to determine version of running daemon.
      - If no argument is provided for "cfm/show", displays detailed
        information about all interfaces with CFM enabled.
      - If no argument is provided for "lacp/show", displays detailed
        information about all ports with LACP enabled.
    - ovs-vswitchd:
      - The software switch now supports 255 OpenFlow tables, instead
        of just one.  By default, only table 0 is consulted, but the
        new NXAST_RESUBMIT_TABLE action can look up in additional
        tables.  Tables 128 and above are reserved for use by the
        switch itself; please use only tables 0 through 127.
      - Add support for 802.1D spanning tree (STP).
    - Fragment handling extensions:
      - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
        fields are made available for matching in fragments with
        offset 0.
      - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
        via "ip_frag" in ovs-ofctl).
      - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
        fragment handling policy.
    - CAPWAP tunneling now supports an extension to transport a 64-key.  By
      default it remains compatible with the old version and other
      standards-based implementations.
    - Flow setups are now processed in a round-robin manner across ports
      to prevent any single client from monopolizing the CPU and conducting
      a denial of service attack.
    - Added support for native VLAN tagging.  A new "vlan_mode"
      parameter can be set for "port". Possible values: "access",
      "trunk", "native-tagged" and "native-untagged".
    - test-openflowd has been removed.  Please use ovs-vswitchd instead.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 09 Dec 2011 23:36:00 +0000

openvswitch (1.2.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - New "ofproto" abstraction layer to ease porting to hardware
      switching ASICs.
    - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
    - Datapath support for Linux kernels up to 3.0.
    - OpenFlow:
      - New "bundle" and "bundle_load" action extensions.
    - Database:
      - Implement table unique constraints.
      - Support cooperative locking between callers.
    - ovs-dpctl:
      - New "-s" option for "show" command prints packet and byte
        counters for each port.
    - ovs-ofctl:
      - New "--readd" option for "replace-flows".
    - ovs-vsctl:
      - New "show" command to print an overview of configuration.
      - New "comment" command to add remark that explains intentions.
    - ovs-brcompatd has been rewritten to fix long-standing bugs.
    - ovs-openflowd has been renamed test-openflowd and moved into the
      tests directory.  Its presence confused too many users.  Please
      use ovs-vswitchd instead.
    - New ovs-benchmark utility to test flow setup performance.
    - A new log level "off" has been added.  Configuring a log facility
      "off" prevents any messages from being logged to it.  Previously,
      "emer" was effectively "off" because no messages were ever logged at
      level "emer".  Now, errors that cause a process to exit are logged
      at "emer" level.
    - "configure" option --with-l26 has been renamed --with-linux, and
      --with-l26-source has been renamed --with-linux-source.  The old
      names will be removed after the next release, so please update
      your scripts.
    - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
      datapath/linux-2.6/compat-2.6 directories.
    - Feature removals:
      - Dropped support for "tun_id_from_cookie" OpenFlow extension.
        Please use the extensible match extensions instead.
      - Removed the Maintenance_Point and Monitor tables in an effort
        to simplify 802.1ag configuration.
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 03 Aug 2011 14:43:00 +0000

openvswitch (1.1.1-1) unstable; urgency=low

  [ Open vSwitch team ]
  * Bug fixes.

  [ Simon Horman ]
  * docs: Suppress warning marcro DD not defined
    (upstream commit 58f870d0)
  * debian: Make openvswitch depend on Python
    (upstream commit aa41cb61)
  * debian: Don't begin openvswitch-pki description with article.
    (upstream commit bc6bb66)
  * Debian: Add ${misc:Depends} dependency to python-openvswitch
  * Debian: Update standards version from 3.9.1 to 3.9.2
  * Debian: ${source:Version} dependency on python openvswitch
  * Debian: ${source:Version} dependency for python openvswitch
  * Switch to dpkg-source 3.0 (quilt) format
    - For local non-debian/ patches (above)

 -- Simon Horman <horms@debian.org>  Wed, 15 Jun 2011 10:46:15 +0900

openvswitch (1.1.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - Ability to define policies over IPv6
    - LACP
    - 802.1ag CCM
    - Support for extensible match extensions to OpenFlow
    - QoS:
      - Support for HFSC qdisc.
      - Queue used by in-band control can now be configured.
    - Kernel:
      - Kernel<->userspace interface has been reworked and should be
        close to a stable ABI now.
      - "Port group" concept has been dropped.
    - GRE over IPSEC tunnels
    - Bonding:
      - New active backup bonding mode.
      - New L4 hashing support when LACP is enabled.
      - Source MAC hash now includes VLAN field also.
      - miimon support.
    - Greatly improved handling of large flow tables
    - ovs-dpctl:
      - "show" command now prints full vport configuration.
      - "dump-groups" command removed since kernel support for
        port groups was dropped.
    - ovs-vsctl:
      - New commands for working with the new Managers table.
      - "list" command enhanced with new formatting options and --columns
        option.
      - "get" command now accepts new --id option.
      - New "find" command.
    - ovs-ofctl:
      - New "queue-stats" command for printing queue stats.
      - New commands "replace-flows" and "diff-flows".
      - Commands to add and remove flows can now read from files.
      - New --flow-format option to enable or disable NXM.
      - New --more option to increase OpenFlow message verbosity.
      - Removed "tun-cookie" command, which is no longer useful.
    - ovs-controller enhancements for testing various features.
    - New ovs-vlan-test command for testing for Linux kernel driver VLAN
      bugs.  New ovs-vlan-bug-workaround command for enabling and
      disabling a workaround for these driver bugs.
    - OpenFlow support:
      - "Resubmit" actions now update flow statistics.
      - New "register" extension for use in matching and actions, via NXM.
      - New "multipath" experimental action extension.
      - New support for matching multicast Ethernet frames, via NXM.
      - New extension for OpenFlow vendor error codes.
      - New extension to set the QoS output queue without actually
        sending to an output port.
      - Open vSwitch now reports a single flow table, instead of
        separate hash and wildcard tables.  This better models the
        current implementation.
      - New experimental "note" action.
      - New "ofproto/trace" ovs-appctl command and associated utilities
        to ease debugging complex flow tables.
    - Database:
      - Schema documentation now includes an entity-relationship diagram.
      - The database is now garbage collected.  In most tables,
        unreferenced rows will be deleted automatically.
      - Many tables now include statistics updated periodically by
        ovs-vswitchd or ovsdb-server.
      - Every table now has an "external-ids" column for use by OVS
        integrators.
      - There is no default controller anymore.  Each bridge must have its
        controller individually specified.
      - The "fail-mode" is now a property of a Bridge instead of a Controller.
      - New versioning and checksum features.
      - New Managers table and manager_options column in Open_vSwitch table
        for specifying managers.  The old "managers" column in the
        Open_vSwitch table has been removed.
      - Many "name" columns are now immutable.
    - Feature removals:
      - Dropped support for XenServer pre-5.6.100.
      - Dropped support for Linux pre-2.6.18.
      - Dropped controller discovery support.
      - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
        Statistics reporting in the database is a rough equivalent.
      - Dropped the "corekeeper" package (now separate, at
        http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
    - Performance and scalability improvements
    - Bug fixes

  [ Simon Horman ]
  * Add the following fixes from upstream branch-1.1
    - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
              dpif_linux_is_internal_device().
    - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
              module.
    - 002d4a3 vswitch: Improve schema documentation.
    - 58bd294 cfm: Fix broken fault logic.
    - c042664 bridge: Run once before configuring CFM.
   * Switch to dpkg-source 3.0 (quilt) format

 -- Simon Horman <horms@debian.org>  Wed, 27 Apr 2011 17:11:10 +0900

openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low

  * Git snapshot, including
    - tests: Fix Y2011 bug in testsuite
      (closes: #609506)

 -- Simon Horman <horms@debian.org>  Wed, 12 Jan 2011 08:34:35 +0900

openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low

  * Git snaptshot

 -- Simon Horman <horms@debian.org>  Thu, 06 Jan 2011 11:11:55 +0900

openvswitch (1.1.0~pre2-5) unstable; urgency=low

  * Open vSwitch only works on Linux so set
    the Architecture of binary packages to linux-any accordingly

 -- Simon Horman <horms@debian.org>  Tue, 23 Nov 2010 07:55:19 +0900

openvswitch (1.1.0~pre2-4) unstable; urgency=low

  * Add procps to Build-Depends
    (closes: #602891)

 -- Simon Horman <horms@debian.org>  Tue, 16 Nov 2010 06:46:17 +0900

openvswitch (1.1.0~pre2-3) unstable; urgency=low

  * Remove the corekeeper package as it isn't strongly related
    to Open vSwitch. It has subsequently been broken off into
    a separate source repository and may be uploaded as its
    own debian source package.
    http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
    (closes: #602946)
  * Avoid the use of long socket names.
    (closes: #602891, closes: #602911)

 -- Simon Horman <horms@debian.org>  Thu, 11 Nov 2010 06:35:05 +0900

openvswitch (1.1.0~pre2-2) unstable; urgency=low

  * Clarify licensing of files in xenserver/

 -- Simon Horman <horms@debian.org>  Thu, 23 Sep 2010 10:56:18 +0900

openvswitch (1.1.0~pre2-1) unstable; urgency=low

  * New upstream version
    - Bug fixes

 -- Simon Horman <horms@debian.org>  Wed, 15 Sep 2010 18:28:59 +0900

openvswitch (1.1.0~pre1-1) unstable; urgency=low

  * New upstream version
    - OpenFlow 1.0 slicing (QoS) functionality
    - Python bindings for configuration database (no write support)
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 31 Aug 2010 23:20:00 +0000

openvswitch (1.0.1-1) unstable; urgency=low

  * New upstream version.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 17 May 2010 10:36:00 +0000