]>
git.proxmox.com Git - pve-cluster.git/blob - data/PVE/DataCenterConfig.pm
1 package PVE
:: DataCenterConfig
;
6 use PVE
:: JSONSchema
qw(parse_property_string) ;
10 my $migration_format = {
14 enum
=> [ 'secure' , 'insecure' ],
15 description
=> "Migration traffic is encrypted using an SSH tunnel by " .
16 "default. On secure, completely private networks this can be " .
17 "disabled to increase performance." ,
22 type
=> 'string' , format
=> 'CIDR' ,
23 format_description
=> 'CIDR' ,
24 description
=> "CIDR of the (sub) network that is used for migration."
31 enum
=> [ 'freeze' , 'failover' , 'conditional' , 'migrate' ],
32 description
=> "The policy for HA services on node shutdown. 'freeze' disables " .
33 "auto-recovery, 'failover' ensures recovery, 'conditional' recovers on " .
34 "poweroff and freezes on reboot. 'migrate' will migrate running services " .
35 "to other nodes, if possible. With 'freeze' or 'failover', HA Services will " .
36 "always get stopped first on shutdown." ,
37 verbose_description
=> "Describes the policy for handling HA services on poweroff " .
38 "or reboot of a node. Freeze will always freeze services which are still located " .
39 "on the node on shutdown, those services won't be recovered by the HA manager. " .
40 "Failover will not mark the services as frozen and thus the services will get " .
41 "recovered to other nodes, if the shutdown node does not come up again quickly " .
42 "(< 1min). 'conditional' chooses automatically depending on the type of shutdown, " .
43 "i.e., on a reboot the service will be frozen but on a poweroff the service will " .
44 "stay as is, and thus get recovered after about 2 minutes. " .
45 "Migrate will try to move all running services to another node when a reboot or " .
46 "shutdown was triggered. The poweroff process will only continue once no running services " .
47 "are located on the node anymore. If the node comes up again, the service will " .
48 "be moved back to the previously powered-off node, at least if no other migration, " .
49 "reloaction or recovery took place." ,
50 default => 'conditional' ,
57 description
=> "U2F AppId URL override. Defaults to the origin." ,
58 format_description
=> 'APPID' ,
63 description
=> "U2F Origin override. Mostly useful for single nodes with a single URL." ,
64 format_description
=> 'URL' ,
69 my $webauthn_format = {
73 'Relying party name. Any text identifier.'
74 . ' Changing this *may* break existing credentials.' ,
75 format_description
=> 'RELYING_PARTY' ,
81 'Site origin. Must be a `https://` URL (or `http://localhost`).'
82 . ' Should contain the address users type in their browsers to access'
83 . ' the web interface.'
84 . ' Changing this *may* break existing credentials.' ,
85 format_description
=> 'URL' ,
91 'Relying part ID. Must be the domain name without protocol, port or location.'
92 . ' Changing this *will* break existing credentials.' ,
93 format_description
=> 'DOMAINNAME' ,
98 PVE
:: JSONSchema
:: register_format
( 'mac-prefix' , \
& pve_verify_mac_prefix
);
99 sub pve_verify_mac_prefix
{
100 my ( $mac_prefix, $noerr ) = @_ ;
102 if ( $mac_prefix !~ m/^[a-f0-9][02468ace](?::[a-f0-9]{2}){0,2}:?$/i ) {
103 return undef if $noerr ;
104 die "value is not a valid unicast MAC address prefix \n " ;
109 my $datacenter_schema = {
111 additionalProperties
=> 0 ,
116 description
=> "Default keybord layout for vnc server." ,
117 enum
=> PVE
:: Tools
:: kvmkeymaplist
(),
122 description
=> "Default GUI language." ,
150 description
=> "Specify external http proxy which is used for downloads (example: 'http://username:password\ @host :port/')" ,
151 pattern
=> "http://.*" ,
153 migration_unsecure
=> {
156 description
=> "Migration is secure using SSH tunnel by default. " .
157 "For secure private networks you can disable it to speed up " .
158 "migration. Deprecated, use the 'migration' property instead!" ,
162 type
=> 'string' , format
=> $migration_format,
163 description
=> "For cluster wide migration settings." ,
168 description
=> "Select the default Console viewer. You can either use the builtin java applet (VNC; deprecated and maps to html5), an external virt-viewer comtatible application (SPICE), an HTML5 based vnc viewer (noVNC), or an HTML5 based console client (xtermjs). If the selected viewer is not available (e.g. SPICE not activated for the VM), the fallback is noVNC." ,
169 enum
=> [ 'applet' , 'vv' , 'html5' , 'xtermjs' ],
174 format
=> 'email-opt' ,
175 description
=> "Specify email address to send notification from (default is root @\$hostname )" ,
181 description
=> "Defines how many workers (per node) are maximal started " .
182 " on actions like 'stopall VMs' or task from the ha-manager." ,
187 default => 'watchdog' ,
188 enum
=> [ 'watchdog' , 'hardware' , 'both' ],
189 description
=> "Set the fencing mode of the HA cluster. Hardware mode " .
190 "needs a valid configuration of fence devices in /etc/pve/ha/fence.cfg." .
191 " With both all two modes are used." .
192 " \n\n WARNING: 'hardware' and 'both' are EXPERIMENTAL & WIP" ,
196 type
=> 'string' , format
=> $ha_format,
197 description
=> "Cluster wide HA settings." ,
202 format
=> 'mac-prefix' ,
203 description
=> 'Prefix for autogenerated MAC addresses.' ,
205 bwlimit
=> PVE
:: JSONSchema
:: get_standard_option
( 'bwlimit' ),
209 format
=> $u2f_format,
210 description
=> 'u2f' ,
215 format
=> $webauthn_format,
216 description
=> 'webauthn configuration' ,
220 description
=> "Datacenter description. Shown in the web-interface datacenter notes panel."
221 . " This is saved as comment inside the configuration file." ,
222 maxLength
=> 64 * 1024 ,
228 # make schema accessible from outside (for documentation)
229 sub get_datacenter_schema
{ return $datacenter_schema };
231 sub parse_datacenter_config
{
232 my ( $filename, $raw ) = @_ ;
234 $raw = '' if ! defined ( $raw );
236 # description may be comment or key-value pair (or both)
238 for my $line ( split ( /\n/ , $raw )) {
239 if ( $line =~ /^\#(.*)\s*$/ ) {
240 $comment .= PVE
:: Tools
:: decode_text
( $1 ) . " \n " ;
244 # parse_config ignores lines with # => use $raw
245 my $res = PVE
:: JSONSchema
:: parse_config
( $datacenter_schema, $filename, $raw );
247 $res ->{ description
} = $comment ;
249 if ( my $migration = $res ->{ migration
}) {
250 $res ->{ migration
} = parse_property_string
( $migration_format, $migration );
253 if ( my $ha = $res ->{ ha
}) {
254 $res ->{ ha
} = parse_property_string
( $ha_format, $ha );
257 if ( my $u2f = $res ->{ u2f
}) {
258 $res ->{ u2f
} = parse_property_string
( $u2f_format, $u2f );
261 if ( my $webauthn = $res ->{ webauthn
}) {
262 $res ->{ webauthn
} = parse_property_string
( $webauthn_format, $webauthn );
265 # for backwards compatibility only, new migration property has precedence
266 if ( defined ( $res ->{ migration_unsecure
})) {
267 if ( defined ( $res ->{ migration
}->{ type
})) {
268 warn "deprecated setting 'migration_unsecure' and new 'migration: type' " .
269 "set at same time! Ignore 'migration_unsecure' \n " ;
271 $res ->{ migration
}->{ type
} = ( $res ->{ migration_unsecure
}) ?
'insecure' : 'secure' ;
275 # for backwards compatibility only, applet maps to html5
276 if ( defined ( $res ->{ console
}) && $res ->{ console
} eq 'applet' ) {
277 $res ->{ console
} = 'html5' ;
283 sub write_datacenter_config
{
284 my ( $filename, $cfg ) = @_ ;
286 # map deprecated setting to new one
287 if ( defined ( $cfg ->{ migration_unsecure
}) && ! defined ( $cfg ->{ migration
})) {
288 my $migration_unsecure = delete $cfg ->{ migration_unsecure
};
289 $cfg ->{ migration
}->{ type
} = ( $migration_unsecure ) ?
'insecure' : 'secure' ;
292 # map deprecated applet setting to html5
293 if ( defined ( $cfg ->{ console
}) && $cfg ->{ console
} eq 'applet' ) {
294 $cfg ->{ console
} = 'html5' ;
297 if ( ref ( my $migration = $cfg ->{ migration
})) {
298 $cfg ->{ migration
} = PVE
:: JSONSchema
:: print_property_string
( $migration, $migration_format );
301 if ( ref ( my $ha = $cfg ->{ ha
})) {
302 $cfg ->{ ha
} = PVE
:: JSONSchema
:: print_property_string
( $ha, $ha_format );
305 if ( ref ( my $u2f = $cfg ->{ u2f
})) {
306 $cfg ->{ u2f
} = PVE
:: JSONSchema
:: print_property_string
( $u2f, $u2f_format );
309 if ( ref ( my $webauthn = $cfg ->{ webauthn
})) {
310 $cfg ->{ webauthn
} = PVE
:: JSONSchema
:: print_property_string
( $webauthn, $webauthn_format );
314 # add description as comment to top of file
315 my $description = $cfg ->{ description
} || '' ;
316 foreach my $line ( split ( /\n/ , $description )) {
317 $comment .= '#' . PVE
:: Tools
:: encode_text
( $line ) . " \n " ;
319 delete $cfg ->{ description
}; # add only as comment, no additional key-value pair
320 my $dump = PVE
:: JSONSchema
:: dump_config
( $datacenter_schema, $filename, $cfg );
322 return $comment . " \n " . $dump ;
325 PVE
:: Cluster
:: cfs_register_file
( 'datacenter.cfg' ,
326 \
& parse_datacenter_config
,
327 \
& write_datacenter_config
);