save('proc_net_dev', <<'/proc/net/dev');
eth0:
eth1:
+eth2:
+eth3:
+eth4:
+eth5:
/proc/net/dev
r(load('brbase'));
-my $ip = '192.168.0.2';
-my $nm = '255.255.255.0';
+#
+# Variables used for the various interfaces:
+#
+
+my $ip = '192.168.0.2/24';
my $gw = '192.168.0.1';
my $svcnodeip = '239.192.105.237';
my $physdev = 'eth0';
my $remoteip1 = '192.168.0.3';
my $remoteip2 = '192.168.0.4';
+#
+# Hunk for the default bridge of the 'brbase' configuration
+#
+
+my $vmbr0_part = <<"PART";
+auto vmbr0
+iface vmbr0 inet static
+ address 10.0.0.2/24
+ gateway 10.0.0.1
+ bridge-ports eth0
+ bridge-stp off
+ bridge-fd 0
+PART
+chomp $vmbr0_part;
+
+#
+# Configure eth1 statically, store its expected interfaces hunk in $eth1_part
+# and test!
+#
$config->{ifaces}->{eth1} = {
type => 'eth',
method => 'static',
address => $ip,
- netmask => $nm,
gateway => $gw,
families => ['inet'],
autostart => 1
};
-$config->{ifaces}->{vmbr1} = {
- type => 'bridge',
- method => 'manual',
- families => ['inet'],
- bridge_stp => off,
- bridge_fd => 0,
- bridge_ports => vxlan1,
- bridge_vlan_aware => yes,
- autostart => 1
-};
+my $eth1_part = <<"PART";
+auto eth1
+iface eth1 inet static
+ address $ip
+ gateway $gw
+PART
+chomp $eth1_part;
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
-$config->{ifaces}->{vmbr2} = {
- type => 'bridge',
- method => 'manual',
- families => ['inet'],
- bridge_stp => off,
- bridge_fd => 0,
- bridge_ports => vxlan2,
- autostart => 1
-};
+iface eth0 inet manual
-$config->{ifaces}->{vmbr3} = {
- type => 'bridge',
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+iface eth4 inet manual
+
+iface eth5 inet manual
+
+$vmbr0_part
+
+CHECK
+
+#
+# Add a bond for eth2 & 3 and check the new output
+#
+
+$config->{ifaces}->{bond0} = {
+ type => 'bond',
+ mtu => 1400,
+ slaves => 'eth2 eth3',
+ bond_mode => '802.3ad',
+ bond_xmit_hash_policy => 'layer3+4',
+ bond_miimon => 100,
method => 'manual',
families => ['inet'],
- bridge_stp => off,
- bridge_fd => 0,
- bridge_ports => vxlan3,
- bridge_vlan_aware => yes,
- bridge_vids => '2-10',
autostart => 1
};
+my $bond0_part = <<"PART";
+auto bond0
+iface bond0 inet manual
+ bond-slaves eth2 eth3
+ bond-miimon 100
+ bond-mode 802.3ad
+ bond-xmit-hash-policy layer3+4
+ mtu 1400
+PART
+chomp $bond0_part;
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+iface eth4 inet manual
+
+iface eth5 inet manual
+
+$bond0_part
+
+$vmbr0_part
+
+CHECK
+
+#
+# Add vxlan1 and 2
+#
$config->{ifaces}->{vxlan1} = {
type => 'vxlan',
families => ['inet'],
'vxlan-id' => 2,
'vxlan-local-tunnelip' => $ip,
- 'bridge-learning' => 'off',
- 'bridge-arp-nd-suppress' => 'on',
- 'bridge-unicast-flood' => 'off',
- 'bridge-multicast-flood' => 'off',
autostart => 1
};
-$config->{ifaces}->{vxlan3} = {
- type => 'vxlan',
- method => 'manual',
- families => ['inet'],
- 'vxlan-id' => 3,
- 'vxlan-remoteip' => [$remoteip1, $remoteip2],
- 'bridge-access' => 3,
- autostart => 1
-};
+my $vxlan12_part = <<"PART";
+auto vxlan1
+iface vxlan1 inet manual
+ vxlan-id 1
+ vxlan-svcnodeip $svcnodeip
+ vxlan-physdev $physdev
+auto vxlan2
+iface vxlan2 inet manual
+ vxlan-id 2
+ vxlan-local-tunnelip $ip
+PART
+chomp $vxlan12_part;
expect load('loopback') . <<"CHECK";
source-directory interfaces.d
iface eth0 inet manual
-auto eth1
-iface eth1 inet static
- address $ip
- netmask $nm
- gateway $gw
+$eth1_part
-auto vmbr0
-iface vmbr0 inet static
- address 10.0.0.2
- netmask 255.255.255.0
- gateway 10.0.0.1
- bridge-ports eth0
- bridge-stp off
- bridge-fd 0
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+iface eth4 inet manual
+
+iface eth5 inet manual
+
+$bond0_part
+
+$vmbr0_part
+
+$vxlan12_part
+
+CHECK
+#
+# Add vxlan3 and 3 bridges using vxlan1..3
+#
+
+$config->{ifaces}->{vmbr1} = {
+ mtu => 1400,
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vxlan1',
+ bridge_vlan_aware => 'yes',
+ autostart => 1
+};
+
+$config->{ifaces}->{vmbr2} = {
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vxlan2',
+ autostart => 1
+};
+
+$config->{ifaces}->{vmbr3} = {
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vxlan3',
+ bridge_vlan_aware => 'yes',
+ bridge_vids => '2-10',
+ autostart => 1
+};
+
+my $vmbr123_part = <<"PART";
auto vmbr1
iface vmbr1 inet manual
bridge-ports vxlan1
bridge-fd 0
bridge-vlan-aware yes
bridge-vids 2-4094
+ mtu 1400
auto vmbr2
iface vmbr2 inet manual
bridge-fd 0
bridge-vlan-aware yes
bridge-vids 2-10
+PART
+chomp $vmbr123_part;
-auto vxlan1
-iface vxlan1 inet manual
- vxlan-id 1
- vxlan-svcnodeip $svcnodeip
- vxlan-physdev $physdev
+$config->{ifaces}->{vxlan3} = {
+ type => 'vxlan',
+ method => 'manual',
+ families => ['inet'],
+ 'vxlan-id' => 3,
+ 'vxlan-remoteip' => [$remoteip1, $remoteip2],
+ 'bridge-access' => 3,
+ autostart => 1
+};
-auto vxlan2
-iface vxlan2 inet manual
- vxlan-id 2
- vxlan-local-tunnelip $ip
+my $vx = $config->{ifaces}->{vxlan2};
+$vx->{'bridge-learning'} = 'off';
+$vx->{'bridge-arp-nd-suppress'} = 'on';
+$vx->{'bridge-unicast-flood'} = 'off';
+$vx->{'bridge-multicast-flood'} = 'off';
+my $vxlan123_part = $vxlan12_part ."\n" . <<"PART";
bridge-arp-nd-suppress on
bridge-learning off
bridge-multicast-flood off
vxlan-remoteip $remoteip1
vxlan-remoteip $remoteip2
bridge-access 3
+PART
+chomp $vxlan123_part;
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+iface eth4 inet manual
+
+iface eth5 inet manual
+
+$bond0_part
+
+$vmbr0_part
+
+$vmbr123_part
+
+$vxlan123_part
CHECK
+#
+# Now add vlans on all types of interfaces: vmbr1, bond0 and eth1
+#
+
+$config->{ifaces}->{'vmbr1.100'} = {
+ type => 'vlan',
+ mtu => 1300,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{'bond0.100'} = {
+ type => 'vlan',
+ mtu => 1300,
+ method => 'manual',
+ families => ['inet'],
+ 'vlan-protocol' => '802.1ad',
+ autostart => 1
+};
+
+$config->{ifaces}->{'bond0.100.10'} = {
+ type => 'vlan',
+ mtu => 1300,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{'eth1.100'} = {
+ type => 'vlan',
+ mtu => 1400,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{'vmbr4'} = {
+ mtu => 1200,
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'bond0.100',
+ autostart => 1
+};
+
+$config->{ifaces}->{'vmbr5'} = {
+ mtu => 1100,
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vmbr4.99',
+ autostart => 1
+};
+
+$config->{ifaces}->{vmbr6} = {
+ ovs_mtu => 1400,
+ type => 'OVSBridge',
+ ovs_ports => 'bond1 ovsintvlan',
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{bond1} = {
+ ovs_mtu => 1300,
+ type => 'OVSBond',
+ ovs_bridge => 'vmbr6',
+ ovs_bonds => 'eth4 eth5',
+ ovs_options => 'bond_mode=active-backup',
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{ovsintvlan} = {
+ ovs_mtu => 1300,
+ type => 'OVSIntPort',
+ ovs_bridge => 'vmbr6',
+ ovs_options => 'tag=14',
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+iface eth4 inet manual
+
+iface eth5 inet manual
+
+auto eth1.100
+iface eth1.100 inet manual
+ mtu 1400
+
+allow-vmbr6 ovsintvlan
+iface ovsintvlan inet manual
+ ovs_type OVSIntPort
+ ovs_bridge vmbr6
+ ovs_mtu 1300
+ ovs_options tag=14
+
+$bond0_part
+
+allow-vmbr6 bond1
+iface bond1 inet manual
+ ovs_bonds eth4 eth5
+ ovs_type OVSBond
+ ovs_bridge vmbr6
+ ovs_mtu 1300
+ ovs_options bond_mode=active-backup
+
+auto bond0.100
+iface bond0.100 inet manual
+ mtu 1300
+ vlan-protocol 802.1ad
+
+auto bond0.100.10
+iface bond0.100.10 inet manual
+ mtu 1300
+
+$vmbr0_part
+
+$vmbr123_part
+
+auto vmbr4
+iface vmbr4 inet manual
+ bridge-ports bond0.100
+ bridge-stp off
+ bridge-fd 0
+ mtu 1200
+
+auto vmbr5
+iface vmbr5 inet manual
+ bridge-ports vmbr4.99
+ bridge-stp off
+ bridge-fd 0
+ mtu 1100
+
+allow-ovs vmbr6
+iface vmbr6 inet manual
+ ovs_type OVSBridge
+ ovs_ports bond1 ovsintvlan
+ ovs_mtu 1400
+
+auto vmbr1.100
+iface vmbr1.100 inet manual
+ mtu 1300
+
+$vxlan123_part
+
+CHECK
+
+#
+# Now check the new config for idempotency:
+#
+
save('if', w());
r(load('if'));
expect load('if');
+#
+# Check a brbase with an ipv6 address on eth1
+#
+
r(load('brbase'));
my $ip = 'fc05::2';
autostart => 1
};
-
expect load('loopback') . <<"CHECK";
source-directory interfaces.d
auto eth1
iface eth1 inet6 static
- address $ip
- netmask $nm
- gateway $gw
+ address $ip/$nm
+ gateway $gw
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+iface eth4 inet manual
+
+iface eth5 inet manual
auto vmbr0
iface vmbr0 inet static
- address 10.0.0.2
- netmask 255.255.255.0
- gateway 10.0.0.1
+ address 10.0.0.2/24
+ gateway 10.0.0.1
bridge-ports eth0
bridge-stp off
bridge-fd 0
projects / pve-common.git / blobdiff