projects / pve-docs.git / blame
| Commit | Line | Data |
|---|---|---|
| bac8c385 DM |
1 | `net[n]`: `name=<String> [,bridge=<vmbr<Number>>] [,firewall=<[1|0]>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<MAC>] [,ip=<IPv4Format/CIDR>] [,ip6=<IPv6Format/CIDR>] [,mtu=<Number>] [,rate=<mbps>] [,tag=<VlanNo>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]` |
| 2 | ||
| 3 | `bridge`: `<vmbr<Number>>` :: | |
| 4 | ||
| 5 | Bridge to attach the network device to. | |
| 6 | ||
| 7 | `firewall`: `<[1|0]>` :: | |
| 8 | ||
| 9 | Controls whether this interface's firewall rules should be used. | |
| 10 | ||
| 11 | `gw`: `<GatewayIPv4>` :: | |
| 12 | ||
| 13 | Default gateway for IPv4 traffic. | |
| 14 | ||
| 15 | `gw6`: `<GatewayIPv6>` :: | |
| 16 | ||
| 17 | Default gateway for IPv6 traffic. | |
| 18 | ||
| 19 | `hwaddr`: `<MAC>` :: | |
| 20 | ||
| 21 | The interface MAC address. This is dynamically allocated by default, but | |
| 22 | you can set that statically if needed, for example to always have the same | |
| 23 | link-local IPv6 address. (lxc.network.hwaddr) | |
| 24 | ||
| 25 | `ip`: `<IPv4Format/CIDR>` :: | |
| 26 | ||
| 27 | IPv4 address in CIDR format. | |
| 28 | ||
| 29 | `ip6`: `<IPv6Format/CIDR>` :: | |
| 30 | ||
| 31 | IPv6 address in CIDR format. | |
| 32 | ||
| 33 | `mtu`: `<Number>` :: | |
| 34 | ||
| 35 | Maximum transfer unit of the interface. (lxc.network.mtu) | |
| 36 | ||
| 37 | `name`: `<String>` :: | |
| 38 | ||
| 39 | Name of the network device as seen from inside the container. | |
| 40 | (lxc.network.name) | |
| 41 | ||
| 42 | `rate`: `<mbps>` :: | |
| 43 | ||
| 44 | Apply rate limiting to the interface | |
| 45 | ||
| 46 | `tag`: `<VlanNo>` :: | |
| 47 | ||
| 48 | VLAN tag for this interface. | |
| 49 | ||
| 50 | `trunks`: `<vlanid[;vlanid...]>` :: | |
| 51 | ||
| 52 | VLAN ids to pass through the interface | |
| 53 | ||
| 54 | `type`: `(veth)` :: | |
| 55 | ||
| 56 | Network interface type. | |
| 57 |