ha-manager: clarify start failure policy

[pve-docs.git] / pct-network-opts.adoc

diff --git a/pct-network-opts.adoc b/pct-network-opts.adoc
index 571ea54f0e7ce965d220d11ba74f9d229f0cac94..44ff7abf00c93841dae590730754db91b0374e85 100644 (file)
--- a/pct-network-opts.adoc
+++ b/pct-network-opts.adoc
@@ -1,10 +1,10 @@
-`net[n]`: `name=<String> [,bridge=<vmbr<Number>>] [,firewall=<[1|0]>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<MAC>] [,ip=<IPv4Format/CIDR>] [,ip6=<IPv6Format/CIDR>] [,mtu=<Number>] [,rate=<mbps>] [,tag=<VlanNo>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]`
+`net[n]`: `name=<string> [,bridge=<bridge>] [,firewall=<1|0>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<XX:XX:XX:XX:XX:XX>] [,ip=<IPv4Format/CIDR>] [,ip6=<IPv6Format/CIDR>] [,mtu=<integer>] [,rate=<mbps>] [,tag=<integer>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]`
 
-`bridge`: `<vmbr<Number>>` ::
+`bridge`: `<bridge>` ::
 
 Bridge to attach the network device to.
 
-`firewall`: `<[1|0]>` ::
+`firewall`: `boolean` ::
 
 Controls whether this interface's firewall rules should be used.
 
@@ -16,11 +16,9 @@ Default gateway for IPv4 traffic.
 
 Default gateway for IPv6 traffic.
 
-`hwaddr`: `<MAC>` ::
+`hwaddr`: `<XX:XX:XX:XX:XX:XX>` ::
 
-The interface MAC address. This is dynamically allocated by default, but
-you can set that statically if needed, for example to always have the same
-link-local IPv6 address. (lxc.network.hwaddr)
+The interface MAC address. This is dynamically allocated by default, but you can set that statically if needed, for example to always have the same link-local IPv6 address. (lxc.network.hwaddr)
 
 `ip`: `<IPv4Format/CIDR>` ::
 
@@ -30,20 +28,19 @@ IPv4 address in CIDR format.
 
 IPv6 address in CIDR format.
 
-`mtu`: `<Number>` ::
+`mtu`: `integer (64 - N)` ::
 
 Maximum transfer unit of the interface. (lxc.network.mtu)
 
-`name`: `<String>` ::
+`name`: `<string>` ::
 
-Name of the network device as seen from inside the container.
-(lxc.network.name)
+Name of the network device as seen from inside the container. (lxc.network.name)
 
 `rate`: `<mbps>` ::
 
 Apply rate limiting to the interface
 
-`tag`: `<VlanNo>` ::
+`tag`: `integer (1 - 4094)` ::
 
 VLAN tag for this interface.