+[[chapter_pct]]
ifdef::manvolnum[]
-PVE({manvolnum})
-================
-include::attributes.txt[]
+pct(1)
+======
+:pve-toplevel:
NAME
----
pct - Tool to manage Linux Containers (LXC) on Proxmox VE
-SYNOPSYS
+SYNOPSIS
--------
include::pct.1-synopsis.adoc[]
ifndef::manvolnum[]
Proxmox Container Toolkit
=========================
-include::attributes.txt[]
+:pve-toplevel:
endif::manvolnum[]
+ifdef::wiki[]
+:title: Linux Container
+endif::wiki[]
+Containers are a lightweight alternative to fully virtualized machines (VMs).
+They use the kernel of the host system that they run on, instead of emulating a
+full operating system (OS). This means that containers can access resources on
+the host system directly.
-Containers are a lightweight alternative to fully virtualized
-VMs. Instead of emulating a complete Operating System (OS), containers
-simply use the OS of the host they run on. This implies that all
-containers use the same kernel, and that they can access resources
-from the host directly.
+The runtime costs for containers is low, usually negligible. However, there
+are some drawbacks that need be considered:
-This is great because containers do not waste CPU power nor memory due
-to kernel emulation. Container run-time costs are close to zero and
-usually negligible. But there are also some drawbacks you need to
-consider:
+* Only Linux distributions can be run in containers. (It is not
+ possible to run FreeBSD or MS Windows inside a container.)
-* You can only run Linux based OS inside containers, i.e. it is not
- possible to run FreeBSD or MS Windows inside.
-
-* For security reasons, access to host resources needs to be
- restricted. This is done with AppArmor, SecComp filters and other
- kernel features. Be prepared that some syscalls are not allowed
- inside containers.
+* For security reasons, access to host resources needs to be restricted. Containers
+ run in their own separate namespaces. Additionally some syscalls are not
+ allowed within containers.
{pve} uses https://linuxcontainers.org/[LXC] as underlying container
-technology. We consider LXC as low-level library, which provides
-countless options. It would be too difficult to use those tools
-directly. Instead, we provide a small wrapper called `pct`, the
-"Proxmox Container Toolkit".
+technology. The ``Proxmox Container Toolkit'' (`pct`) simplifies the usage of LXC
+containers.
-The toolkit is tightly coupled with {pve}. That means that it is aware
-of the cluster setup, and it can use the same network and storage
-resources as fully virtualized VMs. You can even use the {pve}
-firewall, or manage containers using the HA framework.
+Containers are tightly integrated with {pve}. This means that they are aware of
+the cluster setup, and they can use the same network and storage resources as
+virtual machines. You can also use the {pve} firewall, or manage containers
+using the HA framework.
Our primary goal is to offer an environment as one would get from a
VM, but without the additional overhead. We call this "System
Containers".
-NOTE: If you want to run micro-containers (with docker, rct, ...), it
+NOTE: If you want to run micro-containers (with docker, rkt, etc.) it
is best to run them inside a VM.
-Security Considerations
------------------------
-
-Containers use the same kernel as the host, so there is a big attack
-surface for malicious users. You should consider this fact if you
-provide containers to totally untrusted people. In general, fully
-virtualized VMs provide better isolation.
-
-The good news is that LXC uses many kernel security features like
-AppArmor, CGroups and PID and user namespaces, which makes containers
-usage quite secure. We distinguish two types of containers:
-
-Privileged containers
-~~~~~~~~~~~~~~~~~~~~~
-
-Security is done by dropping capabilities, using mandatory access
-control (AppArmor), SecComp filters and namespaces. The LXC team
-considers this kind of container as unsafe, and they will not consider
-new container escape exploits to be security issues worthy of a CVE
-and quick fix. So you should use this kind of containers only inside a
-trusted environment, or when no untrusted task is running as root in
-the container.
-
-Unprivileged containers
-~~~~~~~~~~~~~~~~~~~~~~~
-
-This kind of containers use a new kernel feature called user
-namespaces. The root uid 0 inside the container is mapped to an
-unprivileged user outside the container. This means that most security
-issues (container escape, resource abuse, ...) in those containers
-will affect a random unprivileged user, and so would be a generic
-kernel security bug rather than an LXC issue. The LXC team thinks
-unprivileged containers are safe by design.
-
-
-Configuration
--------------
+Technology Overview
+-------------------
-The '/etc/pve/lxc/<CTID>.conf' file stores container configuration,
-where '<CTID>' is the numeric ID of the given container. Like all
-other files stored inside '/etc/pve/', they get automatically
-replicated to all other cluster nodes.
+* LXC (https://linuxcontainers.org/)
-NOTE: CTIDs < 100 are reserved for internal purposes, and CTIDs need to be
-unique cluster wide.
+* Integrated into {pve} graphical user interface (GUI)
-.Example Container Configuration
-----
-ostype: debian
-arch: amd64
-hostname: www
-memory: 512
-swap: 512
-net0: bridge=vmbr0,hwaddr=66:64:66:64:64:36,ip=dhcp,name=eth0,type=veth
-rootfs: local:107/vm-107-disk-1.raw,size=7G
-----
+* Easy to use command line tool `pct`
-Those configuration files are simple text files, and you can edit them
-using a normal text editor ('vi', 'nano', ...). This is sometimes
-useful to do small corrections, but keep in mind that you need to
-restart the container to apply such changes.
+* Access via {pve} REST API
-For that reason, it is usually better to use the 'pct' command to
-generate and modify those files, or do the whole thing using the GUI.
-Our toolkit is smart enough to instantaneously apply most changes to
-running containers. This feature is called "hot plug", and there is no
-need to restart the container in that case.
+* lxcfs to provide containerized /proc file system
-File Format
-~~~~~~~~~~~
+* CGroups (control groups) for resource allocation
-Container configuration files use a simple colon separated key/value
-format. Each line has the following format:
+* AppArmor/Seccomp to improve security
- # this is a comment
- OPTION: value
+* Modern Linux kernels
-Blank lines in those files are ignored, and lines starting with a '#'
-character are treated as comments and are also ignored.
+* Image based deployment (templates)
-It is possible to add low-level, LXC style configuration directly, for
-example:
+* Uses {pve} storage library
- lxc.init_cmd: /sbin/my_own_init
+* Container setup from host (network, DNS, storage, etc.)
-or
+Security Considerations
+-----------------------
- lxc.init_cmd = /sbin/my_own_init
+Containers use the kernel of the host system. This creates a big attack
+surface for malicious users. This should be considered if containers
+are provided to untrustworthy people. In general, full
+virtual machines provide better isolation.
-Those settings are directly passed to the LXC low-level tools.
+However, LXC uses many security features like AppArmor, CGroups and kernel
+namespaces to reduce the attack surface.
-Snapshots
-~~~~~~~~~
+AppArmor profiles are used to restrict access to possibly dangerous actions.
+Some system calls, i.e. `mount`, are prohibited from execution.
-When you create a snapshot, 'pct' stores the configuration at snapshot
-time into a separate snapshot section within the same configuration
-file. For example, after creating a snapshot called 'testsnapshot',
-your configuration file will look like this:
+To trace AppArmor activity, use:
-.Container Configuration with Snapshot
----
-memory: 512
-swap: 512
-parent: testsnaphot
-...
-
-[testsnaphot]
-memory: 512
-swap: 512
-snaptime: 1457170803
-...
+# dmesg | grep apparmor
----
-There are a few snapshot related properties like 'parent' and
-'snaptime'. The 'parent' property is used to store the parent/child
-relationship between snapshots. 'snaptime' is the snapshot creation
-time stamp (unix epoch).
-
Guest Operating System Configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------------
-We normally try to detect the operating system type inside the
-container, and then modify some files inside the container to make
-them work as expected. Here is a short list of things we do at
-container startup:
+{pve} tries to detect the Linux distribution in the container, and modifies some
+files. Here is a short list of things done at container startup:
set /etc/hostname:: to set the container name
randomize crontab:: so that cron does not start at the same time on all containers
-The above task depends on the OS type, so the implementation is different
-for each OS type. You can also disable any modifications by manually
-setting the 'ostype' to 'unmanaged'.
+Changes made by {PVE} are enclosed by comment markers:
+
+----
+# --- BEGIN PVE ---
+<data>
+# --- END PVE ---
+----
+
+Those markers will be inserted at a reasonable location in the
+file. If such a section already exists, it will be updated in place
+and will not be moved.
+
+Modification of a file can be prevented by adding a `.pve-ignore.`
+file for it. For instance, if the file `/etc/.pve-ignore.hosts`
+exists then the `/etc/hosts` file will not be touched. This can be a
+simple empty file created via:
+
+----
+# touch /etc/.pve-ignore.hosts
+----
+
+Most modifications are OS dependent, so they differ between different
+distributions and versions. You can completely disable modifications
+by manually setting the `ostype` to `unmanaged`.
OS type detection is done by testing for certain files inside the
container:
-Ubuntu:: inspect /etc/lsb-release ('DISTRIB_ID=Ubuntu')
+Ubuntu:: inspect /etc/lsb-release (`DISTRIB_ID=Ubuntu`)
Debian:: test /etc/debian_version
Alpine:: test /etc/alpine-release
-NOTE: Container start fails if the configured 'ostype' differs from the auto
+Gentoo:: test /etc/gentoo-release
+
+NOTE: Container start fails if the configured `ostype` differs from the auto
detected type.
+[[pct_container_images]]
Container Images
----------------
-Container Images, sometimes also referred to as "templates" or
-"appliances", are 'tar' archives which contain everything to run a
-container. You can think of it as a tidy container backup. Like most
-modern container toolkits, 'pct' uses those images when you create a
-new container, for example:
+Container images, sometimes also referred to as ``templates'' or
+``appliances'', are `tar` archives which contain everything to run a
+container. `pct` uses them to create a new container, for example:
- pct create 999 local:vztmpl/debian-8.0-standard_8.0-1_amd64.tar.gz
+----
+# pct create 999 local:vztmpl/debian-10.0-standard_10.0-1_amd64.tar.gz
+----
-Proxmox itself ships a set of basic templates for most common
-operating systems, and you can download them using the 'pveam' (short
-for {pve} Appliance Manager) command line utility. You can also
-download https://www.turnkeylinux.org/[TurnKey Linux] containers using
-that tool (or the graphical user interface).
+{pve} itself provides a variety of basic templates for the most common
+Linux distributions. They can be downloaded using the GUI or the
+`pveam` (short for {pve} Appliance Manager) command line utility.
+Additionally, https://www.turnkeylinux.org/[TurnKey Linux]
+container templates are also available to download.
-Our image repositories contain a list of available images, and there
-is a cron job run each day to download that list. You can trigger that
-update manually with:
+The list of available templates is updated daily via cron. To trigger it manually:
- pveam update
+----
+# pveam update
+----
-After that you can view the list of available images using:
+To view the list of available images run:
- pveam available
+----
+# pveam available
+----
-You can restrict this large list by specifying the 'section' you are
-interested in, for example basic 'system' images:
+You can restrict this large list by specifying the `section` you are
+interested in, for example basic `system` images:
.List available system images
----
# pveam available --section system
-system archlinux-base_2015-24-29-1_x86_64.tar.gz
-system centos-7-default_20160205_amd64.tar.xz
-system debian-6.0-standard_6.0-7_amd64.tar.gz
-system debian-7.0-standard_7.0-3_amd64.tar.gz
-system debian-8.0-standard_8.0-1_amd64.tar.gz
-system ubuntu-12.04-standard_12.04-1_amd64.tar.gz
-system ubuntu-14.04-standard_14.04-1_amd64.tar.gz
-system ubuntu-15.04-standard_15.04-1_amd64.tar.gz
-system ubuntu-15.10-standard_15.10-1_amd64.tar.gz
+system alpine-3.10-default_20190626_amd64.tar.xz
+system alpine-3.9-default_20190224_amd64.tar.xz
+system archlinux-base_20190924-1_amd64.tar.gz
+system centos-6-default_20191016_amd64.tar.xz
+system centos-7-default_20190926_amd64.tar.xz
+system centos-8-default_20191016_amd64.tar.xz
+system debian-10.0-standard_10.0-1_amd64.tar.gz
+system debian-8.0-standard_8.11-1_amd64.tar.gz
+system debian-9.0-standard_9.7-1_amd64.tar.gz
+system fedora-30-default_20190718_amd64.tar.xz
+system fedora-31-default_20191029_amd64.tar.xz
+system gentoo-current-default_20190718_amd64.tar.xz
+system opensuse-15.0-default_20180907_amd64.tar.xz
+system opensuse-15.1-default_20190719_amd64.tar.xz
+system ubuntu-16.04-standard_16.04.5-1_amd64.tar.gz
+system ubuntu-18.04-standard_18.04.1-1_amd64.tar.gz
+system ubuntu-19.04-standard_19.04-1_amd64.tar.gz
+system ubuntu-19.10-standard_19.10-1_amd64.tar.gz
----
Before you can use such a template, you need to download them into one
-of your storages. You can simply use storage 'local' for that
+of your storages. You can simply use storage `local` for that
purpose. For clustered installations, it is preferred to use a shared
storage so that all nodes can access those images.
- pveam download local debian-8.0-standard_8.0-1_amd64.tar.gz
+----
+# pveam download local debian-10.0-standard_10.0-1_amd64.tar.gz
+----
You are now ready to create containers using that image, and you can
-list all downloaded images on storage 'local' with:
+list all downloaded images on storage `local` with:
----
# pveam list local
-local:vztmpl/debian-8.0-standard_8.0-1_amd64.tar.gz 190.20MB
+local:vztmpl/debian-10.0-standard_10.0-1_amd64.tar.gz 219.95MB
----
The above command shows you the full {pve} volume identifiers. They include
the storage name, and most other {pve} commands can use them. For
-examply you can delete that image later with:
-
- pveam remove local:vztmpl/debian-8.0-standard_8.0-1_amd64.tar.gz
+example you can delete that image later with:
+----
+# pveam remove local:vztmpl/debian-10.0-standard_10.0-1_amd64.tar.gz
+----
+[[pct_container_storage]]
Container Storage
-----------------
-Traditional containers use a very simple storage model, only allowing
-a single mount point, the root file system. This was further
-restricted to specific file system types like 'ext4' and 'nfs'.
-Additional mounts are often done by user provided scripts. This turend
-out to be complex and error prone, so we try to avoid that now.
-
-Our new LXC based container model is more flexible regarding
-storage. First, you can have more than a single mount point. This
-allows you to choose a suitable storage for each application. For
-example, you can use a relatively slow (and thus cheap) storage for
-the container root file system. Then you can use a second mount point
-to mount a very fast, distributed storage for your database
-application.
-
-The second big improvement is that you can use any storage type
-supported by the {pve} storage library. That means that you can store
-your containers on local 'lvmthin' or 'zfs', shared 'iSCSI' storage,
-or even on distributed storage systems like 'ceph'. It also enables us
-to use advanced storage features like snapshots and clones. 'vzdump'
-can also use the snapshot feature to provide consistent container
-backups.
-
-Last but not least, you can also mount local devices directly, or
-mount local directories using bind mounts. That way you can access
-local storage inside containers with zero overhead. Such bind mounts
-also provide an easy way to share data between different containers.
-
-Container Mountpoints
----------------------
-
-Beside the root directory the container can also have additional mountpoints.
-Currently there are basically three types of mountpoints: storage backed
-mountpoints, bind mounts and device mounts.
-
-Storage backed mountpoints are managed by the {pve} storage subsystem and come
-in three different flavors:
+The {pve} LXC container storage model is more flexible than traditional
+container storage models. A container can have multiple mount points. This makes
+it possible to use the best suited storage for each application.
-- Image based: These are raw images containing a single ext4 formatted file
- system.
-- ZFS Subvolumes: These are technically bind mounts, but with managed storage,
- and thus allow resizing and snapshotting.
-- Directories: passing `size=0` triggers a special case where instead of a raw
- image a directory is created.
+For example the root file system of the container can be on slow and cheap
+storage while the database can be on fast and distributed storage via a second
+mount point. See section <<pct_mount_points, Mount Points>> for further details.
-Bind mounts are considered to not be managed by the storage subsystem, so you
-cannot make snapshots or deal with quotas from inside the container, and with
-unprivileged containers you might run into permission problems caused by the
-user mapping, and cannot use ACLs from inside an unprivileged container.
+Any storage type supported by the {pve} storage library can be used. This means
+that containers can be stored on local (for example `lvm`, `zfs` or directory),
+shared external (like `iSCSI`, `NFS`) or even distributed storage systems like
+Ceph. Advanced storage features like snapshots or clones can be used if the
+underlying storage supports them. The `vzdump` backup tool can use snapshots to
+provide consistent container backups.
+
+Furthermore, local devices or local directories can be mounted directly using
+'bind mounts'. This gives access to local resources inside a container with
+practically zero overhead. Bind mounts can be used as an easy way to share data
+between containers.
-Similarly device mounts are not managed by the storage, but for these the
-`quota` and `acl` options will be honored.
+
+FUSE Mounts
+~~~~~~~~~~~
WARNING: Because of existing issues in the Linux kernel's freezer
subsystem the usage of FUSE mounts inside a container is strongly
advised against, as containers need to be frozen for suspend or
-snapshot mode backups. If FUSE mounts cannot be replaced by other
-mounting mechanisms or storage technologies, it is possible to
-establish the FUSE mount on the Proxmox host and use a bind
-mountpoint to make it accessible inside the container.
+snapshot mode backups.
+
+If FUSE mounts cannot be replaced by other mounting mechanisms or storage
+technologies, it is possible to establish the FUSE mount on the Proxmox host
+and use a bind mount point to make it accessible inside the container.
-Using quotas inside containers
+
+Using Quotas Inside Containers
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Quotas allow to set limits inside a container for the amount of disk space
-that each user can use.
-This only works on ext4 image based storage types and currently does not work
-with unprivileged containers.
+Quotas allow to set limits inside a container for the amount of disk
+space that each user can use.
-Activating the `quota` option causes the following mount options to be used for
-a mountpoint: `usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0`
+NOTE: This only works on ext4 image based storage types and currently only works
+with privileged containers.
-This allows quotas to be used like you would on any other system. You can
-initialize the `/aquota.user` and `/aquota.group` files by running
+Activating the `quota` option causes the following mount options to be
+used for a mount point:
+`usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0`
- quotacheck -cmug /
- quotaon /
+This allows quotas to be used like on any other system. You
+can initialize the `/aquota.user` and `/aquota.group` files by running
+
+----
+# quotacheck -cmug /
+# quotaon /
+----
and edit the quotas via the `edquota` command. Refer to the documentation
of the distribution running inside the container for details.
-NOTE: You need to run the above commands for every mountpoint by passing
-the mountpoint's path instead of just `/`.
+NOTE: You need to run the above commands for every mount point by passing
+the mount point's path instead of just `/`.
+
-Using ACLs inside containers
+Using ACLs Inside Containers
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The standard Posix Access Control Lists are also available inside containers.
-ACLs allow you to set more detailed file ownership than the traditional user/
-group/others model.
+The standard Posix **A**ccess **C**ontrol **L**ists are also available inside
+containers. ACLs allow you to set more detailed file ownership than the
+traditional user/group/others model.
-Container Network
------------------
+Backup of Container mount points
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To include a mount point in backups, enable the `backup` option for it in the
+container configuration. For an existing mount point `mp0`
+
+----
+mp0: guests:subvol-100-disk-1,mp=/root/files,size=8G
+----
+
+add `backup=1` to enable it.
+
+----
+mp0: guests:subvol-100-disk-1,mp=/root/files,size=8G,backup=1
+----
+
+NOTE: When creating a new mount point in the GUI, this option is enabled by
+default.
+
+To disable backups for a mount point, add `backup=0` in the way described above,
+or uncheck the *Backup* checkbox on the GUI.
+
+Replication of Containers mount points
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+By default, additional mount points are replicated when the Root Disk is
+replicated. If you want the {pve} storage replication mechanism to skip a mount
+point, you can set the *Skip replication* option for that mount point. +
+As of {pve} 5.0, replication requires a storage of type `zfspool`. Adding a
+mount point to a different type of storage when the container has replication
+configured requires to have *Skip replication* enabled for that mount point.
+
+[[pct_settings]]
+Container Settings
+------------------
+
+[[pct_general]]
+General Settings
+~~~~~~~~~~~~~~~~
+
+[thumbnail="screenshot/gui-create-ct-general.png"]
+
+General settings of a container include
+
+* the *Node* : the physical server on which the container will run
+* the *CT ID*: a unique number in this {pve} installation used to identify your container
+* *Hostname*: the hostname of the container
+* *Resource Pool*: a logical group of containers and VMs
+* *Password*: the root password of the container
+* *SSH Public Key*: a public key for connecting to the root account over SSH
+* *Unprivileged container*: this option allows to choose at creation time
+if you want to create a privileged or unprivileged container.
+
+Unprivileged Containers
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Unprivileged containers use a new kernel feature called user namespaces. The
+root UID 0 inside the container is mapped to an unprivileged user outside the
+container. This means that most security issues (container escape, resource
+abuse, etc.) in these containers will affect a random unprivileged user, and
+would be a generic kernel security bug rather than an LXC issue. The LXC team
+thinks unprivileged containers are safe by design.
+
+This is the default option when creating a new container.
+
+NOTE: If the container uses systemd as an init system, please be
+aware the systemd version running inside the container should be equal to
+or greater than 220.
+
+
+Privileged Containers
+^^^^^^^^^^^^^^^^^^^^^
+
+Security in containers is achieved by using mandatory access control
+(AppArmor), SecComp filters and namespaces. The LXC team considers this kind of
+container as unsafe, and they will not consider new container escape exploits
+to be security issues worthy of a CVE and quick fix. That's why privileged
+containers should only be used in trusted environments.
+
+WARNING: Although it is not recommended, AppArmor can be disabled for a
+container. This brings security risks with it. Some syscalls can lead to
+privilege escalation when executed within a container if the system is
+misconfigured or if a LXC or Linux Kernel vulnerability exists.
+
+To disable AppArmor for a container, add the following line to the container
+configuration file located at `/etc/pve/lxc/CTID.conf`:
+
+----
+lxc.apparmor_profile = unconfined
+----
+
+Please note that this is not recommended for production use.
+
+
+
+[[pct_cpu]]
+CPU
+~~~
+
+[thumbnail="screenshot/gui-create-ct-cpu.png"]
+
+You can restrict the number of visible CPUs inside the container using the
+`cores` option. This is implemented using the Linux 'cpuset' cgroup
+(**c**ontrol *group*). A special task inside `pvestatd` tries to distribute
+running containers among available CPUs. To view the assigned CPUs run
+the following command:
+
+----
+# pct cpusets
+ ---------------------
+ 102: 6 7
+ 105: 2 3 4 5
+ 108: 0 1
+ ---------------------
+----
+
+Containers use the host kernel directly. All tasks inside a container are
+handled by the host CPU scheduler. {pve} uses the Linux 'CFS' (**C**ompletely
+**F**air **S**cheduler) scheduler by default, which has additional bandwidth
+control options.
+
+[horizontal]
+
+`cpulimit`: :: You can use this option to further limit assigned CPU
+time. Please note that this is a floating point number, so it is
+perfectly valid to assign two cores to a container, but restrict
+overall CPU consumption to half a core.
++
+----
+cores: 2
+cpulimit: 0.5
+----
+
+`cpuunits`: :: This is a relative weight passed to the kernel
+scheduler. The larger the number is, the more CPU time this container
+gets. Number is relative to the weights of all the other running
+containers. The default is 1024. You can use this setting to
+prioritize some containers.
+
+
+[[pct_memory]]
+Memory
+~~~~~~
+
+[thumbnail="screenshot/gui-create-ct-memory.png"]
+
+Container memory is controlled using the cgroup memory controller.
+
+[horizontal]
+
+`memory`: :: Limit overall memory usage. This corresponds
+to the `memory.limit_in_bytes` cgroup setting.
+
+`swap`: :: Allows the container to use additional swap memory from the
+host swap space. This corresponds to the `memory.memsw.limit_in_bytes`
+cgroup setting, which is set to the sum of both value (`memory +
+swap`).
+
+
+[[pct_mount_points]]
+Mount Points
+~~~~~~~~~~~~
+
+[thumbnail="screenshot/gui-create-ct-root-disk.png"]
+
+The root mount point is configured with the `rootfs` property. You can
+configure up to 256 additional mount points. The corresponding options
+are called `mp0` to `mp255`. They can contain the following settings:
+
+include::pct-mountpoint-opts.adoc[]
+
+Currently there are three types of mount points: storage backed
+mount points, bind mounts, and device mounts.
+
+.Typical container `rootfs` configuration
+----
+rootfs: thin1:base-100-disk-1,size=8G
+----
+
+
+Storage Backed Mount Points
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Storage backed mount points are managed by the {pve} storage subsystem and come
+in three different flavors:
+
+- Image based: these are raw images containing a single ext4 formatted file
+ system.
+- ZFS subvolumes: these are technically bind mounts, but with managed storage,
+ and thus allow resizing and snapshotting.
+- Directories: passing `size=0` triggers a special case where instead of a raw
+ image a directory is created.
+
+NOTE: The special option syntax `STORAGE_ID:SIZE_IN_GB` for storage backed
+mount point volumes will automatically allocate a volume of the specified size
+on the specified storage. E.g., calling
+`pct set 100 -mp0 thin1:10,mp=/path/in/container` will allocate a 10GB volume
+on the storage `thin1` and replace the volume ID place holder `10` with the
+allocated volume ID.
+
+
+Bind Mount Points
+^^^^^^^^^^^^^^^^^
+
+Bind mounts allow you to access arbitrary directories from your Proxmox VE host
+inside a container. Some potential use cases are:
+
+- Accessing your home directory in the guest
+- Accessing an USB device directory in the guest
+- Accessing an NFS mount from the host in the guest
+
+Bind mounts are considered to not be managed by the storage subsystem, so you
+cannot make snapshots or deal with quotas from inside the container. With
+unprivileged containers you might run into permission problems caused by the
+user mapping and cannot use ACLs.
+
+NOTE: The contents of bind mount points are not backed up when using `vzdump`.
+
+WARNING: For security reasons, bind mounts should only be established
+using source directories especially reserved for this purpose, e.g., a
+directory hierarchy under `/mnt/bindmounts`. Never bind mount system
+directories like `/`, `/var` or `/etc` into a container - this poses a
+great security risk.
+
+NOTE: The bind mount source path must not contain any symlinks.
+
+For example, to make the directory `/mnt/bindmounts/shared` accessible in the
+container with ID `100` under the path `/shared`, use a configuration line like
+`mp0: /mnt/bindmounts/shared,mp=/shared` in `/etc/pve/lxc/100.conf`.
+Alternatively, use `pct set 100 -mp0 /mnt/bindmounts/shared,mp=/shared` to
+achieve the same result.
+
+
+Device Mount Points
+^^^^^^^^^^^^^^^^^^^
+
+Device mount points allow to mount block devices of the host directly into the
+container. Similar to bind mounts, device mounts are not managed by {PVE}'s
+storage subsystem, but the `quota` and `acl` options will be honored.
+
+NOTE: Device mount points should only be used under special circumstances. In
+most cases a storage backed mount point offers the same performance and a lot
+more features.
+
+NOTE: The contents of device mount points are not backed up when using `vzdump`.
+
+
+[[pct_container_network]]
+Network
+~~~~~~~
+
+[thumbnail="screenshot/gui-create-ct-network.png"]
+
+You can configure up to 10 network interfaces for a single
+container. The corresponding options are called `net0` to `net9`, and
+they can contain the following setting:
+
+include::pct-network-opts.adoc[]
+
+
+[[pct_startup_and_shutdown]]
+Automatic Start and Shutdown of Containers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To automatically start a container when the host system boots, select the
+option 'Start at boot' in the 'Options' panel of the container in the web
+interface or run the following command:
+
+----
+# pct set CTID -onboot 1
+----
+
+.Start and Shutdown Order
+// use the screenshot from qemu - its the same
+[thumbnail="screenshot/gui-qemu-edit-start-order.png"]
+
+If you want to fine tune the boot order of your containers, you can use the following
+parameters:
+
+* *Start/Shutdown order*: Defines the start order priority. For example, set it to 1 if
+you want the CT to be the first to be started. (We use the reverse startup
+order for shutdown, so a container with a start order of 1 would be the last to
+be shut down)
+* *Startup delay*: Defines the interval between this container start and subsequent
+containers starts. For example, set it to 240 if you want to wait 240 seconds before starting
+other containers.
+* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
+for the container to be offline after issuing a shutdown command.
+By default this value is set to 60, which means that {pve} will issue a
+shutdown request, wait 60s for the machine to be offline, and if after 60s
+the machine is still online will notify that the shutdown action failed.
+
+Please note that containers without a Start/Shutdown order parameter will always
+start after those where the parameter is set, and this parameter only
+makes sense between the machines running locally on a host, and not
+cluster-wide.
+
+Hookscripts
+~~~~~~~~~~~
+
+You can add a hook script to CTs with the config property `hookscript`.
+
+----
+# pct set 100 -hookscript local:snippets/hookscript.pl
+----
-TODO
+It will be called during various phases of the guests lifetime.
+For an example and documentation see the example script under
+`/usr/share/pve-docs/examples/guest-example-hookscript.pl`.
+Backup and Restore
+------------------
-Managing Containers with 'pct'
+
+Container Backup
+~~~~~~~~~~~~~~~~
+
+It is possible to use the `vzdump` tool for container backup. Please
+refer to the `vzdump` manual page for details.
+
+
+Restoring Container Backups
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Restoring container backups made with `vzdump` is possible using the
+`pct restore` command. By default, `pct restore` will attempt to restore as much
+of the backed up container configuration as possible. It is possible to override
+the backed up configuration by manually setting container options on the command
+line (see the `pct` manual page for details).
+
+NOTE: `pvesm extractconfig` can be used to view the backed up configuration
+contained in a vzdump archive.
+
+There are two basic restore modes, only differing by their handling of mount
+points:
+
+
+``Simple'' Restore Mode
+^^^^^^^^^^^^^^^^^^^^^^^
+
+If neither the `rootfs` parameter nor any of the optional `mpX` parameters
+are explicitly set, the mount point configuration from the backed up
+configuration file is restored using the following steps:
+
+. Extract mount points and their options from backup
+. Create volumes for storage backed mount points (on storage provided with the
+`storage` parameter, or default local storage if unset)
+. Extract files from backup archive
+. Add bind and device mount points to restored configuration (limited to root user)
+
+NOTE: Since bind and device mount points are never backed up, no files are
+restored in the last step, but only the configuration options. The assumption
+is that such mount points are either backed up with another mechanism (e.g.,
+NFS space that is bind mounted into many containers), or not intended to be
+backed up at all.
+
+This simple mode is also used by the container restore operations in the web
+interface.
+
+
+``Advanced'' Restore Mode
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+By setting the `rootfs` parameter (and optionally, any combination of `mpX`
+parameters), the `pct restore` command is automatically switched into an
+advanced mode. This advanced mode completely ignores the `rootfs` and `mpX`
+configuration options contained in the backup archive, and instead only
+uses the options explicitly provided as parameters.
+
+This mode allows flexible configuration of mount point settings at restore time,
+for example:
+
+* Set target storages, volume sizes and other options for each mount point
+individually
+* Redistribute backed up files according to new mount point scheme
+* Restore to device and/or bind mount points (limited to root user)
+
+
+Managing Containers with `pct`
------------------------------
-'pct' is the tool to manage Linux Containers on {pve}. You can create
-and destroy containers, and control execution (start, stop, migrate,
-...). You can use pct to set parameters in the associated config file,
-like network configuration or memory limits.
+The "Proxmox Container Toolkit" (`pct`) is the command line tool to manage {pve}
+containers. It enables you to create or destroy containers, as well as control the
+container execution (start, stop, reboot, migrate, etc.). It can be used to set
+parameters in the config file of a container, for example the network
+configuration or memory limits.
CLI Usage Examples
~~~~~~~~~~~~~~~~~~
Create a container based on a Debian template (provided you have
-already downloaded the template via the webgui)
+already downloaded the template via the web interface)
- pct create 100 /var/lib/vz/template/cache/debian-8.0-standard_8.0-1_amd64.tar.gz
+----
+# pct create 100 /var/lib/vz/template/cache/debian-10.0-standard_10.0-1_amd64.tar.gz
+----
Start container 100
- pct start 100
+----
+# pct start 100
+----
Start a login session via getty
- pct console 100
+----
+# pct console 100
+----
Enter the LXC namespace and run a shell as root user
- pct enter 100
+----
+# pct enter 100
+----
Display the configuration
- pct config 100
+----
+# pct config 100
+----
-Add a network interface called eth0, bridged to the host bridge vmbr0,
+Add a network interface called `eth0`, bridged to the host bridge `vmbr0`,
set the address and gateway, while it's running
- pct set 100 -net0 name=eth0,bridge=vmbr0,ip=192.168.15.147/24,gw=192.168.15.1
+----
+# pct set 100 -net0 name=eth0,bridge=vmbr0,ip=192.168.15.147/24,gw=192.168.15.1
+----
Reduce the memory of the container to 512MB
- pct set -memory 512 100
+----
+# pct set 100 -memory 512
+----
-Files
-------
-'/etc/pve/lxc/<CTID>.conf'::
+Obtaining Debugging Logs
+~~~~~~~~~~~~~~~~~~~~~~~~
-Configuration file for the container '<CTID>'.
+In case `pct start` is unable to start a specific container, it might be
+helpful to collect debugging output by running `lxc-start` (replace `ID` with
+the container's ID):
+
+----
+# lxc-start -n ID -F -l DEBUG -o /tmp/lxc-ID.log
+----
+This command will attempt to start the container in foreground mode,
+to stop the container run `pct shutdown ID` or `pct stop ID` in a
+second terminal.
-Container Advantages
---------------------
+The collected debug log is written to `/tmp/lxc-ID.log`.
-- Simple, and fully integrated into {pve}. Setup looks similar to a normal
- VM setup.
+NOTE: If you have changed the container's configuration since the last start
+attempt with `pct start`, you need to run `pct start` at least once to also
+update the configuration used by `lxc-start`.
- * Storage (ZFS, LVM, NFS, Ceph, ...)
+[[pct_migration]]
+Migration
+---------
- * Network
+If you have a cluster, you can migrate your Containers with
- * Authentification
+----
+# pct migrate <ctid> <target>
+----
- * Cluster
+This works as long as your Container is offline. If it has local volumes or
+mount points defined, the migration will copy the content over the network to
+the target host if the same storage is defined there.
-- Fast: minimal overhead, as fast as bare metal
+If you want to migrate online Containers, the only way is to use
+restart migration. This can be initiated with the -restart flag and the optional
+-timeout parameter.
-- High density (perfect for idle workloads)
+A restart migration will shut down the Container and kill it after the specified
+timeout (the default is 180 seconds). Then it will migrate the Container
+like an offline migration and when finished, it starts the Container on the
+target node.
-- REST API
+[[pct_configuration]]
+Configuration
+-------------
-- Direct hardware access
+The `/etc/pve/lxc/<CTID>.conf` file stores container configuration,
+where `<CTID>` is the numeric ID of the given container. Like all
+other files stored inside `/etc/pve/`, they get automatically
+replicated to all other cluster nodes.
+NOTE: CTIDs < 100 are reserved for internal purposes, and CTIDs need to be
+unique cluster wide.
-Technology Overview
--------------------
+.Example Container Configuration
+----
+ostype: debian
+arch: amd64
+hostname: www
+memory: 512
+swap: 512
+net0: bridge=vmbr0,hwaddr=66:64:66:64:64:36,ip=dhcp,name=eth0,type=veth
+rootfs: local:107/vm-107-disk-1.raw,size=7G
+----
-- Integrated into {pve} graphical user interface (GUI)
+The configuration files are simple text files. You can edit them
+using a normal text editor (`vi`, `nano`, etc). This is sometimes
+useful to do small corrections, but keep in mind that you need to
+restart the container to apply such changes.
+
+For that reason, it is usually better to use the `pct` command to
+generate and modify those files, or do the whole thing using the GUI.
+Our toolkit is smart enough to instantaneously apply most changes to
+running containers. This feature is called "hot plug", and there is no
+need to restart the container in that case.
+
+In cases where a change cannot be hot plugged, it will be registered
+as a pending change (shown in red color in the GUI). They will only
+be applied after rebooting the container.
+
+
+File Format
+~~~~~~~~~~~
-- LXC (https://linuxcontainers.org/)
+The container configuration file uses a simple colon separated
+key/value format. Each line has the following format:
-- cgmanager for cgroup management
+-----
+# this is a comment
+OPTION: value
+-----
-- lxcfs to provive containerized /proc file system
+Blank lines in those files are ignored, and lines starting with a `#`
+character are treated as comments and are also ignored.
-- apparmor
+It is possible to add low-level, LXC style configuration directly, for
+example:
-- CRIU: for live migration (planned)
+----
+lxc.init_cmd: /sbin/my_own_init
+----
-- We use latest available kernels (4.4.X)
+or
-- Image based deployment (templates)
+----
+lxc.init_cmd = /sbin/my_own_init
+----
-- Container setup from host (Network, DNS, Storage, ...)
+The settings are passed directly to the LXC low-level tools.
+
+
+[[pct_snapshots]]
+Snapshots
+~~~~~~~~~
+
+When you create a snapshot, `pct` stores the configuration at snapshot
+time into a separate snapshot section within the same configuration
+file. For example, after creating a snapshot called ``testsnapshot'',
+your configuration file will look like this:
+
+.Container configuration with snapshot
+----
+memory: 512
+swap: 512
+parent: testsnaphot
+...
+
+[testsnaphot]
+memory: 512
+swap: 512
+snaptime: 1457170803
+...
+----
+
+There are a few snapshot related properties like `parent` and
+`snaptime`. The `parent` property is used to store the parent/child
+relationship between snapshots. `snaptime` is the snapshot creation
+time stamp (Unix epoch).
+
+
+[[pct_options]]
+Options
+~~~~~~~
+
+include::pct.conf.5-opts.adoc[]
+
+
+Locks
+-----
+
+Container migrations, snapshots and backups (`vzdump`) set a lock to
+prevent incompatible concurrent actions on the affected container. Sometimes
+you need to remove such a lock manually (e.g., after a power failure).
+
+----
+# pct unlock <CTID>
+----
+
+CAUTION: Only do this if you are sure the action which set the lock is
+no longer running.
ifdef::manvolnum[]
+
+Files
+------
+
+`/etc/pve/lxc/<CTID>.conf`::
+
+Configuration file for the container '<CTID>'.
+
+
include::pve-copyright.adoc[]
endif::manvolnum[]
projects / pve-docs.git / blobdiff