update link qemu documentation non web.archive

[pve-docs.git] / pve-network.adoc

diff --git a/pve-network.adoc b/pve-network.adoc
index 8f3af0daa16f6339ff7ad6581b0556c6933366a1..add220ef1ab0b3de83a87dfe0b6ba653805dd597 100644 (file)
--- a/pve-network.adoc
+++ b/pve-network.adoc
@@ -38,9 +38,6 @@ Reload Network with ifupdown2
 With the optional `ifupdown2` network managing package you also can reload the
 network configuration live, without requiring a reboot.
 
-NOTE: 'ifupdown2' cannot understand 'OpenVSwitch' syntax, so reloading is *not*
-possible if OVS interfaces are configured.
-
 Since {pve} 6.1 you can apply pending network changes over the web-interface,
 using the 'Apply Configuration' button in the 'Network' panel of a node.
 
@@ -161,9 +158,9 @@ iface vmbr0 inet static
         address 192.168.10.2
         netmask 255.255.255.0
         gateway 192.168.10.1
-        bridge_ports eno1
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports eno1
+        bridge-stp off
+        bridge-fd 0
 ----
 
 Virtual machines behave as if they were directly connected to the
@@ -209,9 +206,9 @@ auto vmbr0
 iface vmbr0 inet static
         address  203.0.113.17
         netmask  255.255.255.248
-        bridge_ports none
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports none
+        bridge-stp off
+        bridge-fd 0
 ----
 
 
@@ -239,9 +236,9 @@ auto vmbr0
 iface vmbr0 inet static
         address  10.10.10.1
         netmask  255.255.255.0
-        bridge_ports none
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports none
+        bridge-stp off
+        bridge-fd 0
 
         post-up   echo 1 > /proc/sys/net/ipv4/ip_forward
         post-up   iptables -t nat -A POSTROUTING -s '10.10.10.0/24' -o eno1 -j MASQUERADE
@@ -261,8 +258,11 @@ post-down iptables -t raw -D PREROUTING -i fwbr+ -j CT --zone 1
 ----
 
 For more information about this, refer to the following links:
+
 https://commons.wikimedia.org/wiki/File:Netfilter-packet-flow.svg[Netfilter Packet Flow]
+
 https://lwn.net/Articles/370152/[Patch on netdev-list introducing conntrack zones]
+
 https://blog.lobraun.de/2019/05/19/prox/[Blog post with a good explanation by using TRACE in the raw table]
 
 
@@ -352,23 +352,25 @@ iface eno1 inet manual
 
 iface eno2 inet manual
 
+iface eno3 inet manual
+
 auto bond0
 iface bond0 inet static
-      slaves eno1 eno2
+      bond-slaves eno1 eno2
       address  192.168.1.2
       netmask  255.255.255.0
-      bond_miimon 100
-      bond_mode 802.3ad
-      bond_xmit_hash_policy layer2+3
+      bond-miimon 100
+      bond-mode 802.3ad
+      bond-xmit-hash-policy layer2+3
 
 auto vmbr0
 iface vmbr0 inet static
         address  10.10.10.2
         netmask  255.255.255.0
         gateway  10.10.10.1
-        bridge_ports eno1
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports eno3
+        bridge-stp off
+        bridge-fd 0
 
 ----
 
@@ -388,19 +390,19 @@ iface eno2 inet manual
 
 auto bond0
 iface bond0 inet manual
-      slaves eno1 eno2
-      bond_miimon 100
-      bond_mode 802.3ad
-      bond_xmit_hash_policy layer2+3
+      bond-slaves eno1 eno2
+      bond-miimon 100
+      bond-mode 802.3ad
+      bond-xmit-hash-policy layer2+3
 
 auto vmbr0
 iface vmbr0 inet static
         address  10.10.10.2
         netmask  255.255.255.0
         gateway  10.10.10.1
-        bridge_ports bond0
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports bond0
+        bridge-stp off
+        bridge-fd 0
 
 ----
 
@@ -474,15 +476,15 @@ iface vmbr0v5 inet static
         address  10.10.10.2
         netmask  255.255.255.0
         gateway  10.10.10.1
-        bridge_ports eno1.5
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports eno1.5
+        bridge-stp off
+        bridge-fd 0
 
 auto vmbr0
 iface vmbr0 inet manual
-        bridge_ports eno1
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports eno1
+        bridge-stp off
+        bridge-fd 0
 
 ----
 
@@ -502,10 +504,10 @@ iface vmbr0.5 inet static
 
 auto vmbr0
 iface vmbr0 inet manual
-        bridge_ports eno1
-        bridge_stp off
-        bridge_fd 0
-        bridge_vlan_aware yes
+        bridge-ports eno1
+        bridge-stp off
+        bridge-fd 0
+        bridge-vlan-aware yes
 ----
 
 The next example is the same setup but a bond is used to
@@ -522,10 +524,10 @@ iface eno2 inet manual
 
 auto bond0
 iface bond0 inet manual
-      slaves eno1 eno2
-      bond_miimon 100
-      bond_mode 802.3ad
-      bond_xmit_hash_policy layer2+3
+      bond-slaves eno1 eno2
+      bond-miimon 100
+      bond-mode 802.3ad
+      bond-xmit-hash-policy layer2+3
 
 iface bond0.5 inet manual
 
@@ -534,15 +536,15 @@ iface vmbr0v5 inet static
         address  10.10.10.2
         netmask  255.255.255.0
         gateway  10.10.10.1
-        bridge_ports bond0.5
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports bond0.5
+        bridge-stp off
+        bridge-fd 0
 
 auto vmbr0
 iface vmbr0 inet manual
-        bridge_ports bond0
-        bridge_stp off
-        bridge_fd 0
+        bridge-ports bond0
+        bridge-stp off
+        bridge-fd 0
 
 ----