NAME
----
-qm - Qemu/KVM Virtual Machine Manager
+qm - QEMU/KVM Virtual Machine Manager
SYNOPSIS
-----------
endif::manvolnum[]
ifndef::manvolnum[]
-Qemu/KVM Virtual Machines
+QEMU/KVM Virtual Machines
=========================
:pve-toplevel:
endif::manvolnum[]
// http://pve.proxmox.com/wiki/KVM
// http://pve.proxmox.com/wiki/Qemu_Server
-Qemu (short form for Quick Emulator) is an open source hypervisor that emulates a
-physical computer. From the perspective of the host system where Qemu is
-running, Qemu is a user program which has access to a number of local resources
+QEMU (short form for Quick Emulator) is an open source hypervisor that emulates a
+physical computer. From the perspective of the host system where QEMU is
+running, QEMU is a user program which has access to a number of local resources
like partitions, files, network cards which are then passed to an
emulated computer which sees them as if they were real devices.
A guest operating system running in the emulated computer accesses these
devices, and runs as if it were running on real hardware. For instance, you can pass
-an ISO image as a parameter to Qemu, and the OS running in the emulated computer
+an ISO image as a parameter to QEMU, and the OS running in the emulated computer
will see a real CD-ROM inserted into a CD drive.
-Qemu can emulate a great variety of hardware from ARM to Sparc, but {pve} is
+QEMU can emulate a great variety of hardware from ARM to Sparc, but {pve} is
only concerned with 32 and 64 bits PC clone emulation, since it represents the
overwhelming majority of server hardware. The emulation of PC clones is also one
of the fastest due to the availability of processor extensions which greatly
-speed up Qemu when the emulated architecture is the same as the host
+speed up QEMU when the emulated architecture is the same as the host
architecture.
NOTE: You may sometimes encounter the term _KVM_ (Kernel-based Virtual Machine).
-It means that Qemu is running with the support of the virtualization processor
-extensions, via the Linux KVM module. In the context of {pve} _Qemu_ and
-_KVM_ can be used interchangeably, as Qemu in {pve} will always try to load the KVM
+It means that QEMU is running with the support of the virtualization processor
+extensions, via the Linux KVM module. In the context of {pve} _QEMU_ and
+_KVM_ can be used interchangeably, as QEMU in {pve} will always try to load the KVM
module.
-Qemu inside {pve} runs as a root process, since this is required to access block
+QEMU inside {pve} runs as a root process, since this is required to access block
and PCI devices.
Emulated devices and paravirtualized devices
--------------------------------------------
-The PC hardware emulated by Qemu includes a mainboard, network controllers,
+The PC hardware emulated by QEMU includes a mainboard, network controllers,
SCSI, IDE and SATA controllers, serial ports (the complete list can be seen in
the `kvm(1)` man page) all of them emulated in software. All these devices
are the exact software equivalent of existing hardware devices, and if the OS
running in the guest has the proper drivers it will use the devices as if it
-were running on real hardware. This allows Qemu to runs _unmodified_ operating
+were running on real hardware. This allows QEMU to runs _unmodified_ operating
systems.
This however has a performance cost, as running in software what was meant to
run in hardware involves a lot of extra work for the host CPU. To mitigate this,
-Qemu can present to the guest operating system _paravirtualized devices_, where
-the guest OS recognizes it is running inside Qemu and cooperates with the
+QEMU can present to the guest operating system _paravirtualized devices_, where
+the guest OS recognizes it is running inside QEMU and cooperates with the
hypervisor.
-Qemu relies on the virtio virtualization standard, and is thus able to present
+QEMU relies on the virtio virtualization standard, and is thus able to present
paravirtualized virtio devices, which includes a paravirtualized generic disk
controller, a paravirtualized network card, a paravirtualized serial port,
a paravirtualized SCSI controller, etc ...
-It is highly recommended to use the virtio devices whenever you can, as they
-provide a big performance improvement. Using the virtio generic disk controller
-versus an emulated IDE controller will double the sequential write throughput,
-as measured with `bonnie++(8)`. Using the virtio network interface can deliver
-up to three times the throughput of an emulated Intel E1000 network card, as
-measured with `iperf(1)`. footnote:[See this benchmark on the KVM wiki
-https://www.linux-kvm.org/page/Using_VirtIO_NIC]
+TIP: It is *highly recommended* to use the virtio devices whenever you can, as
+they provide a big performance improvement and are generally better maintained.
+Using the virtio generic disk controller versus an emulated IDE controller will
+double the sequential write throughput, as measured with `bonnie++(8)`. Using
+the virtio network interface can deliver up to three times the throughput of an
+emulated Intel E1000 network card, as measured with `iperf(1)`. footnote:[See
+this benchmark on the KVM wiki https://www.linux-kvm.org/page/Using_VirtIO_NIC]
[[qm_virtual_machines_settings]]
[thumbnail="screenshot/gui-create-vm-system.png"]
Additionally, the xref:qm_hard_disk[SCSI controller] can be changed.
If you plan to install the QEMU Guest Agent, or if your selected ISO image
-already ships and installs it automatically, you may want to tick the 'Qemu
+already ships and installs it automatically, you may want to tick the 'QEMU
Agent' box, which lets {pve} know that it can use its features to show some
more information, and complete some actions (for example, shutdown or
snapshots) more intelligently.
[[qm_hard_disk_bus]]
Bus/Controller
^^^^^^^^^^^^^^
-Qemu can emulate a number of storage controllers:
+QEMU can emulate a number of storage controllers:
+
+TIP: It is highly recommended to use the *VirtIO SCSI* or *VirtIO Block*
+controller for performance reasons and because they are better maintained.
* the *IDE* controller, has a design which goes back to the 1984 PC/AT disk
controller. Even if this controller has been superseded by recent designs,
hardware, and can connect up to 14 storage devices. {pve} emulates by default a
LSI 53C895A controller.
+
-A SCSI controller of type _VirtIO SCSI_ is the recommended setting if you aim for
-performance and is automatically selected for newly created Linux VMs since
-{pve} 4.3. Linux distributions have support for this controller since 2012, and
-FreeBSD since 2014. For Windows OSes, you need to provide an extra iso
-containing the drivers during the installation.
+A SCSI controller of type _VirtIO SCSI single_ and enabling the
+xref:qm_hard_disk_iothread[IO Thread] setting for the attached disks is
+recommended if you aim for performance. This is the default for newly created
+Linux VMs since {pve} 7.3. Each disk will have its own _VirtIO SCSI_ controller,
+and QEMU will handle the disks IO in a dedicated thread. Linux distributions
+have support for this controller since 2012, and FreeBSD since 2014. For Windows
+OSes, you need to provide an extra ISO containing the drivers during the
+installation.
// https://pve.proxmox.com/wiki/Paravirtualized_Block_Drivers_for_Windows#During_windows_installation.
-If you aim at maximum performance, you can select a SCSI controller of type
-_VirtIO SCSI single_ which will allow you to select the *IO Thread* option.
-When selecting _VirtIO SCSI single_ Qemu will create a new controller for
-each disk, instead of adding all disks to the same controller.
* The *VirtIO Block* controller, often just called VirtIO or virtio-blk,
is an older type of paravirtualized controller. It has been superseded by the
[[qm_hard_disk_iothread]]
IO Thread
^^^^^^^^^
-The option *IO Thread* can only be used when using a disk with the
-*VirtIO* controller, or with the *SCSI* controller, when the emulated controller
- type is *VirtIO SCSI single*.
-With this enabled, Qemu creates one I/O thread per storage controller,
-rather than a single thread for all I/O. This can increase performance when
-multiple disks are used and each disk has its own storage controller.
-
+The option *IO Thread* can only be used when using a disk with the *VirtIO*
+controller, or with the *SCSI* controller, when the emulated controller type is
+*VirtIO SCSI single*. With *IO Thread* enabled, QEMU creates one I/O thread per
+storage controller rather than handling all I/O in the main event loop or vCPU
+threads. One benefit is better work distribution and utilization of the
+underlying storage. Another benefit is reduced latency (hangs) in the guest for
+very I/O-intensive host workloads, since neither the main thread nor a vCPU
+thread can be blocked by disk I/O.
[[qm_cpu]]
CPU
Increasing the number of virtual CPUs (cores and sockets) will usually provide a
performance improvement though that is heavily dependent on the use of the VM.
Multi-threaded applications will of course benefit from a large number of
-virtual CPUs, as for each virtual cpu you add, Qemu will create a new thread of
+virtual CPUs, as for each virtual cpu you add, QEMU will create a new thread of
execution on the host system. If you're not sure about the workload of your VM,
it is usually a safe bet to set the number of *Total cores* to 2.
NOTE: It is perfectly safe if the _overall_ number of cores of all your VMs
-is greater than the number of cores on the server (e.g., 4 VMs with each 4
-cores on a machine with only 8 cores). In that case the host system will
-balance the Qemu execution threads between your server cores, just like if you
-were running a standard multi-threaded application. However, {pve} will prevent
-you from starting VMs with more virtual CPU cores than physically available, as
-this will only bring the performance down due to the cost of context switches.
+is greater than the number of cores on the server (for example, 4 VMs each with
+4 cores (= total 16) on a machine with only 8 cores). In that case the host
+system will balance the QEMU execution threads between your server cores, just
+like if you were running a standard multi-threaded application. However, {pve}
+will prevent you from starting VMs with more virtual CPU cores than physically
+available, as this will only bring the performance down due to the cost of
+context switches.
[[qm_cpu_resource_limits]]
Resource Limits
time in percent, so `1.0` is equal to `100%`, `2.5` to `250%` and so on. If a
single process would fully use one single core it would have `100%` CPU Time
usage. If a VM with four cores utilizes all its cores fully it would
-theoretically use `400%`. In reality the usage may be even a bit higher as Qemu
+theoretically use `400%`. In reality the usage may be even a bit higher as QEMU
can have additional threads for VM peripherals besides the vCPU core ones.
This setting can be useful if a VM should have multiple vCPUs, as it runs a few
processes in parallel, but the VM as a whole should not be able to run all
real host cores CPU time. But, if only 4 would do work they could still get
almost 100% of a real core each.
-NOTE: VMs can, depending on their configuration, use additional threads e.g.,
-for networking or IO operations but also live migration. Thus a VM can show up
-to use more CPU time than just its virtual CPUs could use. To ensure that a VM
-never uses more CPU time than virtual CPUs assigned set the *cpulimit* setting
-to the same value as the total core count.
+NOTE: VMs can, depending on their configuration, use additional threads, such
+as for networking or IO operations but also live migration. Thus a VM can show
+up to use more CPU time than just its virtual CPUs could use. To ensure that a
+VM never uses more CPU time than virtual CPUs assigned set the *cpulimit*
+setting to the same value as the total core count.
The second CPU resource limiting setting, *cpuunits* (nowadays often called CPU
-shares or CPU weight), controls how much CPU time a VM gets in regards to other
-VMs running. It is a relative weight which defaults to `1024`, if you increase
-this for a VM it will be prioritized by the scheduler in comparison to other
-VMs with lower weight. E.g., if VM 100 has set the default 1024 and VM 200 was
-changed to `2048`, the latter VM 200 would receive twice the CPU bandwidth than
-the first VM 100.
+shares or CPU weight), controls how much CPU time a VM gets compared to other
+running VMs. It is a relative weight which defaults to `100` (or `1024` if the
+host uses legacy cgroup v1). If you increase this for a VM it will be
+prioritized by the scheduler in comparison to other VMs with lower weight. For
+example, if VM 100 has set the default `100` and VM 200 was changed to `200`,
+the latter VM 200 would receive twice the CPU bandwidth than the first VM 100.
For more information see `man systemd.resource-control`, here `CPUQuota`
-corresponds to `cpulimit` and `CPUShares` corresponds to our `cpuunits`
+corresponds to `cpulimit` and `CPUWeight` corresponds to our `cpuunits`
setting, visit its Notes section for references and implementation details.
+The third CPU resource limiting setting, *affinity*, controls what host cores
+the virtual machine will be permitted to execute on. E.g., if an affinity value
+of `0-3,8-11` is provided, the virtual machine will be restricted to using the
+host cores `0,1,2,3,8,9,10,` and `11`. Valid *affinity* values are written in
+cpuset `List Format`. List Format is a comma-separated list of CPU numbers and
+ranges of numbers, in ASCII decimal.
+
+NOTE: CPU *affinity* uses the `taskset` command to restrict virtual machines to
+a given set of cores. This restriction will not take effect for some types of
+processes that may be created for IO. *CPU affinity is not a security feature.*
+
+For more information regarding *affinity* see `man cpuset`. Here the
+`List Format` corresponds to valid *affinity* values. Visit its `Formats`
+section for more examples.
+
CPU Type
^^^^^^^^
-Qemu can emulate a number different of *CPU types* from 486 to the latest Xeon
+QEMU can emulate a number different of *CPU types* from 486 to the latest Xeon
processors. Each new processor generation adds new features, like hardware
assisted 3d rendering, random number generation, memory protection, etc ...
Usually you should select for your VM a processor type which closely matches the
This has a downside though. If you want to do a live migration of VMs between
different hosts, your VM might end up on a new system with a different CPU type.
If the CPU flags passed to the guest are missing, the qemu process will stop. To
-remedy this Qemu has also its own CPU type *kvm64*, that {pve} uses by defaults.
+remedy this QEMU has also its own CPU type *kvm64*, that {pve} uses by defaults.
kvm64 is a Pentium 4 look a like CPU type, which has a reduced CPU flags set,
but is guaranteed to work everywhere.
Save this under /etc/udev/rules.d/ as a file ending in `.rules`.
-Note: CPU hot-remove is machine dependent and requires guest cooperation.
-The deletion command does not guarantee CPU removal to actually happen,
-typically it's a request forwarded to guest using target dependent mechanism,
-e.g., ACPI on x86/amd64.
+Note: CPU hot-remove is machine dependent and requires guest cooperation. The
+deletion command does not guarantee CPU removal to actually happen, typically
+it's a request forwarded to guest OS using target dependent mechanism, such as
+ACPI on x86/amd64.
[[qm_memory]]
VM, because it delivers useful information such as how much memory the guest
really uses.
In general, you should leave *ballooning* enabled, but if you want to disable
-it (e.g. for debugging purposes), simply uncheck
-*Ballooning Device* or set
+it (like for debugging purposes), simply uncheck *Ballooning Device* or set
balloon: 0
tap device is added to a bridge, by default vmbr0 in {pve}. In this mode, VMs
have direct access to the Ethernet LAN on which the host is located.
* in the alternative *NAT mode*, each virtual NIC will only communicate with
-the Qemu user networking stack, where a built-in router and DHCP server can
+the QEMU user networking stack, where a built-in router and DHCP server can
provide network access. This built-in DHCP will serve addresses in the private
10.0.2.0/24 range. The NAT mode is much slower than the bridged mode, and
should only be used for testing. This mode is only available via CLI or the API,
You can also skip adding a network device when creating a VM by selecting *No
network device*.
+You can overwrite the *MTU* setting for each VM network device. The option
+`mtu=1` represents a special case, in which the MTU value will be inherited
+from the underlying bridge.
+This option is only available for *VirtIO* network devices.
+
.Multiqueue
If you are using the VirtIO driver, you can optionally activate the
*Multiqueue* option. This option allows the guest OS to process networking
* *cirrus*, this was once the default, it emulates a very old hardware module
with all its problems. This display type should only be used if really
necessary footnote:[https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
-qemu: using cirrus considered harmful], e.g., if using Windows XP or earlier
+qemu: using cirrus considered harmful], for example, if using Windows XP or
+earlier
* *vmware*, is a VMWare SVGA-II compatible adapter.
* *qxl*, is the QXL paravirtualized graphics card. Selecting this also
enables https://www.spice-space.org/[SPICE] (a remote viewer protocol) for the
VM.
+* *virtio-gl*, often named VirGL is a virtual 3D GPU for use inside VMs that
+ can offload workloads to the host GPU without requiring special (expensive)
+ models and drivers and neither binding the host GPU completely, allowing
+ reuse between multiple guests and or the host.
++
+NOTE: VirGL support needs some extra libraries that aren't installed by
+default due to being relatively big and also not available as open source for
+all GPU models/vendors. For most setups you'll just need to do:
+`apt install libgl1 libegl1`
You can edit the amount of memory given to the virtual GPU, by setting
the 'memory' option. This can enable higher resolutions inside the VM,
especially with SPICE/QXL.
As the memory is reserved by display device, selecting Multi-Monitor mode
-for SPICE (e.g., `qxl2` for dual monitors) has some implications:
+for SPICE (such as `qxl2` for dual monitors) has some implications:
* Windows needs a device for each monitor, so if your 'ostype' is some
version of Windows, {pve} gives the VM an extra device per monitor.
standard setups.
Some operating systems (such as Windows 11) may require use of an UEFI
-compatible implementation instead. In such cases, you must rather use *OVMF*,
+compatible implementation. In such cases, you must use *OVMF* instead,
which is an open-source UEFI implementation. footnote:[See the OVMF Project https://github.com/tianocore/tianocore.github.io/wiki/OVMF]
-There are other scenarios in which a BIOS is not a good firmware to boot from,
-e.g. if you want to do VGA passthrough. footnote:[Alex Williamson has a very
-good blog entry about this https://vfio.blogspot.co.at/2014/08/primary-graphics-assignment-without-vga.html]
+There are other scenarios in which the SeaBIOS may not be the ideal firmware to
+boot from, for example if you want to do VGA passthrough. footnote:[Alex
+Williamson has a good blog entry about this
+https://vfio.blogspot.co.at/2014/08/primary-graphics-assignment-without-vga.html]
If you want to use OVMF, there are several things to consider:
You can create such a disk with the following command:
- qm set <vmid> -efidisk0 <storage>:1,format=<format>,efitype=4m,pre-enrolled-keys=1
+----
+# qm set <vmid> -efidisk0 <storage>:1,format=<format>,efitype=4m,pre-enrolled-keys=1
+----
Where *<storage>* is the storage where you want to have the disk, and
*<format>* is a format which the storage supports. Alternatively, you can
with a press of the ESC button during boot), or you have to choose
SPICE as the display type.
+[[qm_tpm]]
+Trusted Platform Module (TPM)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A *Trusted Platform Module* is a device which stores secret data - such as
+encryption keys - securely and provides tamper-resistance functions for
+validating system boot.
+
+Certain operating systems (such as Windows 11) require such a device to be
+attached to a machine (be it physical or virtual).
+
+A TPM is added by specifying a *tpmstate* volume. This works similar to an
+efidisk, in that it cannot be changed (only removed) once created. You can add
+one via the following command:
+
+----
+# qm set <vmid> -tpmstate0 <storage>:1,version=<version>
+----
+
+Where *<storage>* is the storage you want to put the state on, and *<version>*
+is either 'v1.2' or 'v2.0'. You can also add one via the web interface, by
+choosing 'Add' -> 'TPM State' in the hardware section of a VM.
+
+The 'v2.0' TPM spec is newer and better supported, so unless you have a specific
+implementation that requires a 'v1.2' TPM, it should be preferred.
+
+NOTE: Compared to a physical TPM, an emulated one does *not* provide any real
+security benefits. The point of a TPM is that the data on it cannot be modified
+easily, except via commands specified as part of the TPM spec. Since with an
+emulated device the data storage happens on a regular volume, it can potentially
+be edited by anyone with access to it.
+
[[qm_ivshmem]]
Inter-VM shared memory
~~~~~~~~~~~~~~~~~~~~~~
To add such a device, you can use `qm`:
- qm set <vmid> -ivshmem size=32,name=foo
+----
+# qm set <vmid> -ivshmem size=32,name=foo
+----
Where the size is in MiB. The file will be located under
`/dev/shm/pve-shm-$name` (the default name is the vmid).
~~~~~~~~~~~~~~~~~
QEMU can tell the guest which devices it should boot from, and in which order.
-This can be specified in the config via the `boot` property, e.g.:
+This can be specified in the config via the `boot` property, for example:
----
boot: order=scsi0;net0;hostpci0
boot' from the 'Options' Tab of your VM in the web interface, or set it with
the following command:
- qm set <vmid> -onboot 1
+----
+# qm set <vmid> -onboot 1
+----
.Start and Shutdown Order
to other guest systems. For this you can use the following
parameters:
-* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
+* *Start/Shutdown order*: Defines the start order priority. For example, set it
+* to 1 if
you want the VM to be the first to be started. (We use the reverse startup
order for shutdown, so a machine with a start order of 1 would be the last to
be shut down). If multiple VMs have the same order defined on a host, they will
additionally be ordered by 'VMID' in ascending order.
* *Startup delay*: Defines the interval between this VM start and subsequent
-VMs starts . E.g. set it to 240 if you want to wait 240 seconds before starting
-other VMs.
+VMs starts. For example, set it to 240 if you want to wait 240 seconds before
+starting other VMs.
* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
-for the VM to be offline after issuing a shutdown command.
-By default this value is set to 180, which means that {pve} will issue a
-shutdown request and wait 180 seconds for the machine to be offline. If
-the machine is still online after the timeout it will be stopped forcefully.
+for the VM to be offline after issuing a shutdown command. By default this
+value is set to 180, which means that {pve} will issue a shutdown request and
+wait 180 seconds for the machine to be offline. If the machine is still online
+after the timeout it will be stopped forcefully.
NOTE: VMs managed by the HA stack do not follow the 'start on boot' and
'boot order' options currently. Those VMs will be skipped by the startup and
[[qm_qemu_agent]]
-Qemu Guest Agent
+QEMU Guest Agent
~~~~~~~~~~~~~~~~
-The Qemu Guest Agent is a service which runs inside the VM, providing a
+The QEMU Guest Agent is a service which runs inside the VM, providing a
communication channel between the host and the guest. It is used to exchange
information and allows the host to issue commands to the guest.
On a thin provisioned storage, this can help to free up unused space.
+NOTE: There is a caveat with ext4 on Linux, because it uses an in-memory
+optimization to avoid issuing duplicate TRIM requests. Since the guest doesn't
+know about the change in the underlying storage, only the first guest-trim will
+run as expected. Subsequent ones, until the next reboot, will only consider
+parts of the filesystem that changed since then.
+
Troubleshooting
^^^^^^^^^^^^^^^
If you have a cluster, you can migrate your VM to another host with
- qm migrate <vmid> <target>
+----
+# qm migrate <vmid> <target>
+----
There are generally two mechanisms for this
Online Migration
~~~~~~~~~~~~~~~~
-When your VM is running and it has no local resources defined (such as disks
-on local storage, passed through devices, etc.) you can initiate a live
-migration with the -online flag.
+If your VM is running and no locally bound resources are configured (such as
+passed-through devices), you can initiate a live migration with the `--online`
+flag in the `qm migration` command evocation. The web-interface defaults to
+live migration when the VM is running.
How it works
^^^^^^^^^^^^
-This starts a Qemu Process on the target host with the 'incoming' flag, which
-means that the process starts and waits for the memory data and device states
-from the source Virtual Machine (since all other resources, e.g. disks,
-are shared, the memory content and device state are the only things left
-to transmit).
-
-Once this connection is established, the source begins to send the memory
-content asynchronously to the target. If the memory on the source changes,
-those sections are marked dirty and there will be another pass of sending data.
-This happens until the amount of data to send is so small that it can
-pause the VM on the source, send the remaining data to the target and start
-the VM on the target in under a second.
+Online migration first starts a new QEMU process on the target host with the
+'incoming' flag, which performs only basic initialization with the guest vCPUs
+still paused and then waits for the guest memory and device state data streams
+of the source Virtual Machine.
+All other resources, such as disks, are either shared or got already sent
+before runtime state migration of the VMs begins; so only the memory content
+and device state remain to be transferred.
+
+Once this connection is established, the source begins asynchronously sending
+the memory content to the target. If the guest memory on the source changes,
+those sections are marked dirty and another pass is made to send the guest
+memory data.
+This loop is repeated until the data difference between running source VM
+and incoming target VM is small enough to be sent in a few milliseconds,
+because then the source VM can be paused completely, without a user or program
+noticing the pause, so that the remaining data can be sent to the target, and
+then unpause the targets VM's CPU to make it the new running VM in well under a
+second.
Requirements
^^^^^^^^^^^^
For Live Migration to work, there are some things required:
-* The VM has no local resources (e.g. passed through devices, local disks, etc.)
-* The hosts are in the same {pve} cluster.
-* The hosts have a working (and reliable) network connection.
-* The target host must have the same or higher versions of the
- {pve} packages. (It *might* work the other way, but this is never guaranteed)
+* The VM has no local resources that cannot be migrated. For example,
+ PCI or USB devices that are passed through currently block live-migration.
+ Local Disks, on the other hand, can be migrated by sending them to the target
+ just fine.
+* The hosts are located in the same {pve} cluster.
+* The hosts have a working (and reliable) network connection between them.
+* The target host must have the same, or higher versions of the
+ {pve} packages. Although it can sometimes work the other way around, this
+ cannot be guaranteed.
+* The hosts have CPUs from the same vendor with similar capabilities. Different
+ vendor *might* work depending on the actual models and VMs CPU type
+ configured, but it cannot be guaranteed - so please test before deploying
+ such a setup in production.
Offline Migration
~~~~~~~~~~~~~~~~~
-If you have local resources, you can still offline migrate your VMs,
-as long as all disk are on storages, which are defined on both hosts.
-Then the migration will copy the disk over the network to the target host.
+If you have local resources, you can still migrate your VMs offline as long as
+all disk are on storage defined on both hosts.
+Migration then copies the disks to the target host over the network, as with
+online migration. Note that any hardware pass-through configuration may need to
+be adapted to the device location on the target host.
+
+// TODO: mention hardware map IDs as better way to solve that, once available
[[qm_copy_and_clone]]
Copies and Clones
To create and add a 'vmgenid' to an already existing VM one can pass the
special value `1' to let {pve} autogenerate one or manually set the 'UUID'
-footnote:[Online GUID generator http://guid.one/] by using it as value,
-e.g.:
+footnote:[Online GUID generator http://guid.one/] by using it as value, for
+example:
----
- qm set VMID -vmgenid 1
- qm set VMID -vmgenid 00000000-0000-0000-0000-000000000000
+# qm set VMID -vmgenid 1
+# qm set VMID -vmgenid 00000000-0000-0000-0000-000000000000
----
NOTE: The initial addition of a 'vmgenid' device to an existing VM, may result
configuration with:
----
- qm set VMID -delete vmgenid
+# qm set VMID -delete vmgenid
----
The most prominent use case for 'vmgenid' are newer Microsoft Windows
operating systems, which use it to avoid problems in time sensitive or
-replicate services (e.g., databases, domain controller
+replicate services (such as databases or domain controller
footnote:[https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/get-started/virtual-dc/virtualized-domain-controller-architecture])
on snapshot rollback, backup restore or a whole VM clone operation.
VM name as read from the OVF manifest, and import the disks to the +local-lvm+
storage. You have to configure the network manually.
- qm importovf 999 WinDev1709Eval.ovf local-lvm
+----
+# qm importovf 999 WinDev1709Eval.ovf local-lvm
+----
The VM is ready to be started.
--customize=./copy_pub_ssh.sh \
--sparse --image vm600.raw
-You can now create a new target VM for this image.
+You can now create a new target VM, importing the image to the storage `pvedir`
+and attaching it to the VM's SCSI controller:
- qm create 600 --net0 virtio,bridge=vmbr0 --name vm600 --serial0 socket \
- --bootdisk scsi0 --scsihw virtio-scsi-pci --ostype l26
-
-Add the disk image as +unused0+ to the VM, using the storage +pvedir+:
-
- qm importdisk 600 vm600.raw pvedir
-
-Finally attach the unused disk to the SCSI controller of the VM:
-
- qm set 600 --scsi0 pvedir:600/vm-600-disk-1.raw
+----
+# qm create 600 --net0 virtio,bridge=vmbr0 --name vm600 --serial0 socket \
+ --boot order=scsi0 --scsihw virtio-scsi-pci --ostype l26 \
+ --scsi0 pvedir:0,import-from=/path/to/dir/vm600.raw
+----
The VM is ready to be started.
You can add a hook script to VMs with the config property `hookscript`.
- qm set 100 --hookscript local:snippets/hookscript.pl
+----
+# qm set 100 --hookscript local:snippets/hookscript.pl
+----
It will be called during various phases of the guests lifetime.
For an example and documentation see the example script under
You can suspend a VM to disk with the GUI option `Hibernate` or with
- qm suspend ID --todisk
+----
+# qm suspend ID --todisk
+----
That means that the current content of the memory will be saved onto disk
and the VM gets stopped. On the next start, the memory content will be
Managing Virtual Machines with `qm`
------------------------------------
-qm is the tool to manage Qemu/Kvm virtual machines on {pve}. You can
+qm is the tool to manage QEMU/KVM virtual machines on {pve}. You can
create and destroy virtual machines, and control execution
(start/stop/suspend/resume). Besides that, you can use qm to set
parameters in the associated config file. It is also possible to
Using an iso file uploaded on the 'local' storage, create a VM
with a 4 GB IDE disk on the 'local-lvm' storage
- qm create 300 -ide0 local-lvm:4 -net0 e1000 -cdrom local:iso/proxmox-mailgateway_2.1.iso
+----
+# qm create 300 -ide0 local-lvm:4 -net0 e1000 -cdrom local:iso/proxmox-mailgateway_2.1.iso
+----
Start the new VM
- qm start 300
+----
+# qm start 300
+----
Send a shutdown request, then wait until the VM is stopped.
- qm shutdown 300 && qm wait 300
+----
+# qm shutdown 300 && qm wait 300
+----
Same as above, but only wait for 40 seconds.
- qm shutdown 300 && qm wait 300 -timeout 40
+----
+# qm shutdown 300 && qm wait 300 -timeout 40
+----
Destroying a VM always removes it from Access Control Lists and it always
removes the firewall configuration of the VM. You have to activate
'--purge', if you want to additionally remove the VM from replication jobs,
backup jobs and HA resource configurations.
- qm destroy 300 --purge
+----
+# qm destroy 300 --purge
+----
+
+Move a disk image to a different storage.
+
+----
+# qm move-disk 300 scsi0 other-storage
+----
+Reassign a disk image to a different VM. This will remove the disk `scsi1` from
+the source VM and attaches it as `scsi3` to the target VM. In the background
+the disk image is being renamed so that the name matches the new owner.
+
+----
+# qm move-disk 300 scsi1 --target-vmid 400 --target-disk scsi3
+----
[[qm_configuration]]
Locks
-----
-Online migrations, snapshots and backups (`vzdump`) set a lock to
-prevent incompatible concurrent actions on the affected VMs. Sometimes
-you need to remove such a lock manually (e.g., after a power failure).
+Online migrations, snapshots and backups (`vzdump`) set a lock to prevent
+incompatible concurrent actions on the affected VMs. Sometimes you need to
+remove such a lock manually (for example after a power failure).
- qm unlock <vmid>
+----
+# qm unlock <vmid>
+----
CAUTION: Only do that if you are sure the action which set the lock is
no longer running.
projects / pve-docs.git / blobdiff