remove getting help link from wiki

[pve-docs.git] / qm.conf.5-opts.adoc

diff --git a/qm.conf.5-opts.adoc b/qm.conf.5-opts.adoc
index e29c0bd9c92e081636bf0a894149d44e00a8acaa..1ad9cdd01d1040f7fe3df15582201708c2ddf103 100644 (file)
--- a/qm.conf.5-opts.adoc
+++ b/qm.conf.5-opts.adoc
@@ -70,6 +70,22 @@ NOTE: You can disable fair-scheduler configuration by setting this to 0.
 
 Description for the VM. Only used on the configuration web interface. This is saved as comment inside the configuration file.
 
 
 Description for the VM. Only used on the configuration web interface. This is saved as comment inside the configuration file.
 

+`efidisk0`: `[file=]<volume> [,format=<image format>] [,size=<DiskSize>]` ::
+
+Configure a Disk for storing EFI vars
+
+`file`=`<volume>` ;;
+
+The drive's backing volume.
+
+`format`=`<image format>` ;;
+
+The drive's backing file's data format.
+
+`size`=`<DiskSize>` ;;
+
+Disk size. This is purely informational and has no effect.
+

 `freeze`: `boolean` ::
 
 Freeze CPU at startup (use 'c' monitor command to start execution).
 `freeze`: `boolean` ::
 
 Freeze CPU at startup (use 'c' monitor command to start execution).


@@ -77,6 +93,11 @@ Freeze CPU at startup (use 'c' monitor command to start execution).
 `hostpci[n]`: `[host=]<HOSTPCIID[;HOSTPCIID2...]> [,pcie=<1|0>] [,rombar=<1|0>] [,x-vga=<1|0>]` ::
 
 Map host PCI devices into guest.
 `hostpci[n]`: `[host=]<HOSTPCIID[;HOSTPCIID2...]> [,pcie=<1|0>] [,rombar=<1|0>] [,x-vga=<1|0>]` ::
 
 Map host PCI devices into guest.

++
+NOTE: This option allows direct access to host hardware. So it is no longer 
+possible to migrate such machines - use with special care.
++
+CAUTION: Experimental! User reported problems with this option.

 
 `host`=`<HOSTPCIID[;HOSTPCIID2...]>` ;;
 
 
 `host`=`<HOSTPCIID[;HOSTPCIID2...]>` ;;
 


@@ -86,11 +107,6 @@ of PCI virtual functions of the host. HOSTPCIID syntax is:
 'bus:dev.func' (hexadecimal numbers)
 +
 You can us the 'lspci' command to list existing PCI devices.
 'bus:dev.func' (hexadecimal numbers)
 +
 You can us the 'lspci' command to list existing PCI devices.

-+
-NOTE: This option allows direct access to host hardware. So it is no longer 
-possible to migrate such machines - use with special care.
-+
-CAUTION: Experimental! User reported problems with this option.

 
 `pcie`=`boolean` (default=`0`);;
 
 
 `pcie`=`boolean` (default=`0`);;
 


@@ -108,6 +124,10 @@ Enable vfio-vga device support.
 
 Selectively enable hotplug features. This is a comma separated list of hotplug features: 'network', 'disk', 'cpu', 'memory' and 'usb'. Use '0' to disable hotplug completely. Value '1' is an alias for the default 'network,disk,usb'.
 
 
 Selectively enable hotplug features. This is a comma separated list of hotplug features: 'network', 'disk', 'cpu', 'memory' and 'usb'. Use '0' to disable hotplug completely. Value '1' is an alias for the default 'network,disk,usb'.
 

+`hugepages`: `(1024 | 2 | any)` ::
+
+Enable/disable hugepages memory.
+

 `ide[n]`: `[file=]<volume> [,aio=<native|threads>] [,backup=<1|0>] [,bps=<bps>] [,bps_rd=<bps>] [,bps_wr=<bps>] [,cache=<none|writethrough|writeback|unsafe|directsync>] [,cyls=<integer>] [,detect_zeroes=<1|0>] [,discard=<ignore|on>] [,format=<image format>] [,heads=<integer>] [,iops=<iops>] [,iops_max=<iops>] [,iops_rd=<iops>] [,iops_rd_max=<iops>] [,iops_wr=<iops>] [,iops_wr_max=<iops>] [,mbps=<mbps>] [,mbps_max=<mbps>] [,mbps_rd=<mbps>] [,mbps_rd_max=<mbps>] [,mbps_wr=<mbps>] [,mbps_wr_max=<mbps>] [,media=<cdrom|disk>] [,model=<model>] [,rerror=<ignore|report|stop>] [,secs=<integer>] [,serial=<serial>] [,size=<DiskSize>] [,snapshot=<1|0>] [,trans=<none|lba|auto>] [,werror=<enospc|ignore|report|stop>]` ::
 
 Use volume as IDE hard disk or CD-ROM (n is 0 to 3).
 `ide[n]`: `[file=]<volume> [,aio=<native|threads>] [,backup=<1|0>] [,bps=<bps>] [,bps_rd=<bps>] [,bps_wr=<bps>] [,cache=<none|writethrough|writeback|unsafe|directsync>] [,cyls=<integer>] [,detect_zeroes=<1|0>] [,discard=<ignore|on>] [,format=<image format>] [,heads=<integer>] [,iops=<iops>] [,iops_max=<iops>] [,iops_rd=<iops>] [,iops_rd_max=<iops>] [,iops_wr=<iops>] [,iops_wr_max=<iops>] [,mbps=<mbps>] [,mbps_max=<mbps>] [,mbps_rd=<mbps>] [,mbps_rd_max=<mbps>] [,mbps_wr=<mbps>] [,mbps_wr_max=<mbps>] [,media=<cdrom|disk>] [,model=<model>] [,rerror=<ignore|report|stop>] [,secs=<integer>] [,serial=<serial>] [,size=<DiskSize>] [,snapshot=<1|0>] [,trans=<none|lba|auto>] [,werror=<enospc|ignore|report|stop>]` ::
 
 Use volume as IDE hard disk or CD-ROM (n is 0 to 3).


@@ -667,7 +687,6 @@ SCSI controller model
 
 `serial[n]`: `(/dev/.+|socket)` ::
 
 
 `serial[n]`: `(/dev/.+|socket)` ::
 

-+

 Create a serial device inside the VM (n is 0 to 3), and pass through a
 host serial device (i.e. /dev/ttyS0), or create a unix socket on the
 host side (use 'qm terminal' to open a terminal connection).
 Create a serial device inside the VM (n is 0 to 3), and pass through a
 host serial device (i.e. /dev/ttyS0), or create a unix socket on the
 host side (use 'qm terminal' to open a terminal connection).