bump version to 6.1-4

[pve-docs.git] / vxlan-and-evpn.adoc

diff --git a/vxlan-and-evpn.adoc b/vxlan-and-evpn.adoc
index 7f7e04b3c306023d1d2a7e94b3b8ce4a5aaca6c3..ec1bc0701ffd17a6f848c94108c5761cde5af020 100644 (file)
--- a/vxlan-and-evpn.adoc
+++ b/vxlan-and-evpn.adoc
@@ -1126,8 +1126,8 @@ line vty
 !
 ----
 
-VXLAN layer3 routing with anycast gateway + routing to outside with external router
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+VXLAN layer3 routing with anycast gateway + routing to outside with external router with static default gw
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 Routing to outside need the symmetric model.
 
 1 gateway node
@@ -1224,8 +1224,6 @@ iface vmbr4000 inet manual
 frr.conf
 
 ----
-ip prefix-list deny seq 10 deny any
-!
 vrf vrf1
  vni 4000
  exit-vrf
@@ -1239,8 +1237,10 @@ router bgp 1234
  !
  address-family ipv4 unicast
   import vrf vrf1
-  neighbor 192.168.0.2 prefix-list deny out
-  neighbor 192.168.0.3 prefix-list deny out
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  import vrf vrf1
  exit-address-family
  !
  address-family l2vpn evpn
@@ -1255,8 +1255,13 @@ router bgp 1234 vrf vrf1
   redistribute connected
  exit-address-family
  !
+ address-family ipv6 unicast
+  redistribute connected
+ exit-address-family
+ !
  address-family l2vpn evpn
   default-originate ipv4
+  default-originate ipv6
  exit-address-family
 !
 line vty
@@ -1488,6 +1493,16 @@ The external router have ecmp routes to all proxmox nodes.(balancing).
 If the router send the packet to a wrong node (vm is not on this node), this node will route through
 vxlan the packet to final destination.
 
+If you have multiple gateway nodes, disable rp_filter as packet could incoming in a 1 node, and outgoing
+to another node.
+
+sysctl.conf tuning
+-----
+net.ipv4.conf.default.rp_filter=0
+net.ipv4.conf.all.rp_filter=0
+-----
+
+
 *node1
 
 ----
@@ -1576,8 +1591,6 @@ iface vmbr4000 inet manual
 frr.conf
 
 ----
-ip prefix-list deny seq 10 deny any
-!
 vrf vrf1
  vni 4000
  exit-vrf
@@ -1591,8 +1604,10 @@ router bgp 1234
  !
  address-family ipv4 unicast
   import vrf vrf1
-  neighbor 192.168.0.2 prefix-list deny out
-  neighbor 192.168.0.3 prefix-list deny out
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  import vrf vrf1
  exit-address-family
  !
  address-family l2vpn evpn
@@ -1607,8 +1622,13 @@ router bgp 1234 vrf vrf1
   redistribute connected
  exit-address-family
  !
+ address-family ipv6 unicast
+  redistribute connected
+ exit-address-family
+ !
  address-family l2vpn evpn
   default-originate ipv4
+  default-originate ipv6
  exit-address-family
 !
 line vty
@@ -1705,8 +1725,6 @@ iface vmbr4000 inet manual
 frr.conf
 
 ----
-ip prefix-list deny seq 10 deny any
-!
 vrf vrf1
  vni 4000
  exit-vrf
@@ -1720,8 +1738,10 @@ router bgp 1234
  !
  address-family ipv4 unicast
   import vrf vrf1
-  neighbor 192.168.0.1 prefix-list deny out
-  neighbor 192.168.0.3 prefix-list deny out
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  import vrf vrf1
  exit-address-family
  !
  address-family l2vpn evpn
@@ -1734,8 +1754,13 @@ router bgp 1234
   redistribute connected
  exit-address-family
  !
+ address-family ipv6 unicast
+  redistribute connected
+ exit-address-family
+ !
  address-family l2vpn evpn
   default-originate ipv4
+  default-originate ipv6
  exit-address-family
 !
 line vty
@@ -1832,8 +1857,6 @@ iface vmbr4000 inet manual
 frr.conf
 
 ----
-ip prefix-list deny seq 10 deny any
-!
 vrf vrf1
  vni 4000
  exit-vrf
@@ -1847,8 +1870,10 @@ router bgp 1234
  !
  address-family ipv4 unicast
   import vrf vrf1
-  neighbor 192.168.0.1 prefix-list deny out
-  neighbor 192.168.0.2 prefix-list deny out
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  import vrf vrf1
  exit-address-family
  !
  address-family l2vpn evpn
@@ -1863,8 +1888,13 @@ router bgp 1234 vrf vrf1
   redistribute connected
  exit-address-family
  !
+ address-family ipv6 unicast
+  redistribute connected
+ exit-address-family
+ !
  address-family l2vpn evpn
   default-originate ipv4
+  default-originate ipv6
  exit-address-family
 !
 line vty
@@ -1917,6 +1947,91 @@ iface vmbr0 inet static
 ----
 
 
+
+gateway node(s) with a upstream bgp router
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Setup is almost the same than with a static gateway, but we'll connect to an upstream bgp router.
+
+example with node1 as gateway (192.168.0.1) for evpn-bgp, and an upstream bgp router (running frr too) 192.168.0.254.
+
+* node1
+
+frr.conf
+----
+vrf vrf1
+ vni 4000
+ exit-vrf
+!
+router bgp 1234
+ bgp router-id 192.168.0.1
+ no bgp default ipv4-unicast
+ coalesce-time 1000
+ neighbor 192.168.0.2 remote-as 1234
+ neighbor 192.168.0.3 remote-as 1234
+ neighbor 192.168.0.254 remote-as external
+ !
+ address-family ipv4 unicast
+  import vrf vrf1
+  neighbor 192.168.0.254 activate
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  import vrf vrf1
+  neighbor 192.168.0.254 activate
+ exit-address-family
+ !
+ address-family l2vpn evpn
+  neighbor 192.168.0.1 activate
+  neighbor 192.168.0.2 activate
+  neighbor 192.168.0.254 activate
+  advertise-all-vni
+ exit-address-family
+!
+router bgp 1234 vrf vrf1
+!
+ address-family ipv4 unicast
+  redistribute connected
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  redistribute connected
+ exit-address-family
+ !
+ address-family l2vpn evpn
+  default-originate ipv4
+  default-originate ipv6
+ exit-address-family
+!
+line vty
+!
+----
+
+* bgp router
+
+frr.conf
+----
+ip prefix-list NO32 seq 10 permit 0.0.0.0/0 ge 8 le 24
+ip prefix-list NO32 seq 20 deny any
+!
+router bgp 25253
+ bgp router-id 192.168.0.254
+ bgp bestpath as-path multipath-relax
+ neighbor 192.168.0.1 remote-as external
+ neighbor 192.168.0.1 capability extended-nexthop
+ !
+ address-family ipv4 unicast
+  neighbor 192.168.0.1 default-originate
+  neighbor 192.168.0.1 prefix-list NO32 in #don't import /32 route from evpn
+ exit-address-family
+ !
+ address-family ipv6 unicast
+  neighbor 192.168.0.1 default-originate
+  neighbor 192.168.0.1 prefix-list NO32 in #don't import /32 route from evpn
+ exit-address-family
+ !
+!
+---
+
 Route Reflectors
 ^^^^^^^^^^^^^^^^
 If you have a lot of proxmox nodes, or multiple proxmox clusters, you may want
@@ -1990,5 +2105,3 @@ router bgp 1234
  exit-address-family
 !
 ----
-
-#TODO : Documentation with bgp upstream router.