]> git.proxmox.com Git - pve-installer.git/blob - debian/changelog
70a224aa260aef34e9987025922b9a0cb06e2606
[pve-installer.git] / debian / changelog
1 proxmox-installer (8.1.10) bookworm; urgency=medium
2
3 * run command: wait for process exit with sub-second granularity to avoid
4 artificially delay.
5
6 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Feb 2024 20:51:03 +0100
7
8 proxmox-installer (8.1.9) bookworm; urgency=medium
9
10 * run command: avoid using the true value 1 as a special value for parser
11 closure to avoid false-positive detection of CMD_FINISHED flag
12
13 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Feb 2024 15:11:45 +0100
14
15 proxmox-installer (8.1.8) bookworm; urgency=medium
16
17 * ZFS : remove deprecated "fletcher2" algorithm and the dangerous "off"
18 checksum options
19
20 * GTK based UI: replace the use of nested boxes for layouting with grids
21 when possible to ensure correct margins and alignment of widgets.
22
23 * fix #4872: run env: set timeout for country detection
24
25 * common: fqdn: do not allow overlong FQDNs, limit to 63 characters per part
26 and 253 charactrers total, as per Debian spec
27
28 * common: fqdn: implement case-insensitive comparison as per RFC 952
29
30 * fix #5230: properly escape FQDN regex to avoid that problematic values can
31 make it into the host configuration files by mistake
32
33 * switch over to JSON-based protocol for installer to UI communication
34
35
36 -- Proxmox Support Team <support@proxmox.com> Sat, 24 Feb 2024 16:30:08 +0100
37
38 proxmox-installer (8.1.7) bookworm; urgency=medium
39
40 * source interfaces.d snippets by default
41
42 -- Proxmox Support Team <support@proxmox.com> Thu, 23 Nov 2023 11:11:20 +0100
43
44 proxmox-installer (8.1.6) bookworm; urgency=medium
45
46 * grub: install all efi binaries in fallback/default dir
47
48 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2023 13:30:06 +0100
49
50 proxmox-installer (8.1.5) bookworm; urgency=medium
51
52 * various fixes for the TUI installer:
53 - do not center EULA text
54 - preserve auto-reboot checkbox state when switching views
55 - common: enforce even number of disks for ZFS RAID-10
56
57 * serial installer: add serial config for grub to target system
58
59 * zfs: create dataset var-lib-vz for /var/lib/vz to avoid to many
60 intermediate datasets
61
62 * ZFS: detect and handle secure boot
63
64 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2023 14:22:23 +0100
65
66 proxmox-installer (8.1.4) bookworm; urgency=medium
67
68 * tui: fix changing between non-LVM and LVM filesystem in bootdisk chooser
69
70 * ui: stdio: replace newlines with whitespaces in prompt messages
71
72 * tui: install progress: use ok/cancel as button text for installer prompt
73
74 * tui: bootdisk zfs config: add a maximum value to the `copies` option
75
76 * tui: fix interface sort order
77
78 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Nov 2023 19:35:19 +0100
79
80 proxmox-installer (8.1.3) bookworm; urgency=medium
81
82 * run env: do not store empty hostname when trying to detect from DHCP
83
84 * gtk installer: show the unit of inputs for the disk related options
85
86 -- Proxmox Support Team <support@proxmox.com> Fri, 17 Nov 2023 07:39:23 +0100
87
88 proxmox-installer (8.1.2) bookworm; urgency=medium
89
90 * x display server: disable screen saver via blank time
91
92 * zfs: create /var/lib/vz only for PVE
93
94 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Nov 2023 19:21:09 +0100
95
96 proxmox-installer (8.1.1) bookworm; urgency=medium
97
98 * pass optional console parameter from installer to target
99
100 * serial install: fix console parameter parsing
101
102 * fix #4747: pass kernel cmdline parameters to target system
103
104 * fix #1410: zfs: create /var/lib/vz as separate dataset
105
106 * zfs: set acltype=posix for root-dataset to ensure that daemons like
107 journald can provide fine-grained access to non-root users.
108
109 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Nov 2023 08:33:32 +0100
110
111 proxmox-installer (8.1.0) bookworm; urgency=medium
112
113 * various improvements for the TUI installer:
114 - fix #4856: bootdisk: use correct defaults in advanced dialog.
115 - fix incorrect scrolling of form view contents.
116 - don't abort install if minimum memory requirement is not met, allow
117 the user to override this just like in the GTK based installer.
118 - add "Deselect All" button to ZFS and Btrfs multiple disk selection.
119 - improve FQDN validation.
120 - improve bootdisk dialog error handling.
121 - add RAID setup checks for ZFS/Btrfs.
122 - password: include minimum password length in error message.
123 - network: select matching NIC for IP configuration.
124 - setup: fix disk size for 4Kn block devices.
125 - setup: handle missing disk block size gracefully.
126 - update count down of auto-reboot timeout every second like the GTK based
127 installer does.
128 - fix various typos.
129
130 * disk partitioning: fix checking the answer for the to-small-disk prompt.
131
132 * raid setup: btrfs: do not allow legacy BIOS boot on 4Kn disks, like it's
133 already checked for LVM and ZFS.
134
135 * fix #4869: Add marker to the network interfaces that are in an UP-state in
136 the management interface selection.
137
138 * re-use hostname from the runtime environment, if available. For now, this
139 info comes from the DHCP lease only.
140
141 * fix #4829: install: add new ZFS `arc_max` setup option and set the default
142 for Proxmox VE installations via a new heuristic, targetting 10 % of
143 memory, not 50 % and clamp this to minimum 64 MiB and maxmimum 16 GiB.
144 This ensures that most memory is available for virtual guests, the primary
145 use case of Proxmox VE.
146
147 * install correct grub metapackage for the current boot-mode.
148
149 -- Proxmox Support Team <support@proxmox.com> Sat, 11 Nov 2023 14:31:49 +0100
150
151 proxmox-installer (8.0.14) bookworm; urgency=medium
152
153 * pmg: disable clamav-clamonacc.service by default on installation
154
155 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Jun 2023 18:39:41 +0200
156
157 proxmox-installer (8.0.13) bookworm; urgency=medium
158
159 * tui: only show warning for missing hyper-visor CPU flags for PVE
160
161 * tui: block & notify if same disk gets selected twice for Btrfs or ZFS
162
163 * tui: persist disk selection for ZFS and Btrfs
164
165 -- Proxmox Support Team <support@proxmox.com> Tue, 27 Jun 2023 16:19:33 +0200
166
167 proxmox-installer (8.0.11) bookworm; urgency=medium
168
169 * tui: hide max-vz and max-root inputs if product isn't PVE to be consistent
170 with the GTK based installer.
171
172 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Jun 2023 21:39:45 +0200
173
174 proxmox-installer (8.0.10) bookworm; urgency=medium
175
176 * tui: use product for default hostname
177
178 * tui: boot disks: filter out Btrfs if setup-info disallows it, like for
179 Proxmox Mail Gateway or Proxmox Backup Server currently.
180
181 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Jun 2023 19:09:07 +0200
182
183 proxmox-installer (8.0.9) bookworm; urgency=medium
184
185 * tui: switch to `f64` for disk sizes for full range of values
186
187 * tui: wrap multi-disk selection in scrollable view
188
189 * tui: disable automatic text wrapping for form labels
190
191 * tui: add some info to unknown UI messages
192
193 * tui: do not auto reboot on failures
194
195 * gtk: raid disk selector: separate UI state from config state to avoid
196 messing with the order of selection
197
198 * align metadata size and rootdisk size to 4 MiB
199
200 * fix space calculation for small disks for pve product
201
202 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2023 16:48:18 +0200
203
204 proxmox-installer (8.0.8) bookworm; urgency=medium
205
206 * Revert "critic: lazily read directories via <> glob"
207
208 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2023 10:48:12 +0200
209
210 proxmox-installer (8.0.7) bookworm; urgency=medium
211
212 * fix checking the response of the prompt, which is now returning a boolean.
213 This fixes an issue where the user was prompted for small root disk space
214 or if renaming the PVE VG is ok, but the installer always aborted.
215
216 -- Proxmox Support Team <support@proxmox.com> Thu, 22 Jun 2023 07:38:24 +0200
217
218 proxmox-installer (8.0.6) bookworm; urgency=medium
219
220 * tui: remove underline-effect from advanced disk setup titles
221
222 * tui: clamp max LVM disk size to size of selected disk
223
224 * tui: fix ability to type commas
225
226 * tui: do not fail completely on invalid domain names
227
228 * tui: always use mail@example.invalid as default email address
229
230 * run env: re-used cached version to speed up GUI installer start
231
232 * log: record when and that the log got initialized and add some more
233 logging, especially at start up
234
235 * tui: improve ipv6 handling
236
237 * tui: focus next button by default
238
239 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jun 2023 18:42:27 +0200
240
241 proxmox-installer (8.0.5) bookworm; urgency=medium
242
243 * various fixes for the TUI:
244 - make HVM extension not being present a non-fatal warning
245 - do not fail completely on invalid domain names
246 - make disk swap-, max-root-, max-data- and min-lvm-free-size optional
247 falling back to the proxinstall automatic smart defaults in that case.
248 - make auto-deteced network routes optional
249 - skip serializing empty fields for install config
250 - set detected keyboard layout at installer launch
251 - only focus summary table if it can be scrolled
252 - refresh summary view if it is switched back to
253 - make reboot-after-install checkbox default to enabled
254 - redirect TUI stderr output to tty2
255 - use non-slanted logo
256 - implement auto-reboot after installation
257
258 * config: fix missing include of Log module and avoid warning if no country
259 was detected
260
261 * run env: make addresses optional, include all interfaces
262
263 * fix #4643: show a confirmation dialog when clicking abort
264
265 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Jun 2023 13:22:38 +0200
266
267 proxmox-installer (8.0.4) bookworm; urgency=medium
268
269 * re-add Encode module for decoding EULA in GTK installer
270
271 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jun 2023 22:02:57 +0200
272
273 proxmox-installer (8.0.3) bookworm; urgency=medium
274
275 * switch to native versioning
276
277 * Add Terminal User Interface (TUI) based installer written in Rust, using
278 the Cursive toolkit.
279
280 * A variety of fixes and refactoring to prepare for more flexible ways of
281 triggering an installation
282
283 -- Proxmox Support Team <support@proxmox.com> Tue, 20 Jun 2023 21:37:09 +0200
284
285 proxmox-installer (8.0-2) bookworm; urgency=medium
286
287 * fix call to logical_blocksize
288
289 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Jun 2023 11:16:18 +0200
290
291 proxmox-installer (8.0-1) bookworm; urgency=medium
292
293 * fix typo in error message
294
295 * checktime: output expected and wrong times for better UX
296
297 * refactor and split up installer code in modules, in preparation of more
298 installer modi/UIs
299
300 * call Gtk3::init manually, not on perl module load
301
302 * call setupcon when starting-up final installer environment, applying the
303 UTF-8 charset.
304
305 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Jun 2023 09:39:09 +0200
306
307 proxmox-installer (7.4-2) bullseye; urgency=medium
308
309 * d/control: depend on renamed and split-out proxmox-kernel-helper
310
311 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Mar 2023 21:15:56 +0100
312
313 proxmox-installer (7.4-1) bullseye; urgency=medium
314
315 * zfs: fix wrong command reference in error message
316
317 * parition boot disk: use 1 GiB for ESP if root disk has 100+ GB space
318
319 * fix #4430: allow users to select the UTC timezone
320
321 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Mar 2023 12:40:57 +0100
322
323 proxmox-installer (7.3-1) bullseye; urgency=medium
324
325 * lvm create: improve rounding of target root LV size by aligning it down to
326 the 4MB boundary to ensure that LVM doesn't try to over allocates by one
327 extent.
328
329 * align computed swap size down to 4 MB to avoid oddly specific sizes and
330 issues with LVM rounding PEs up on creation
331
332 * lvm create: leave 4 MB space unallocated space for small disks (<= 32GB)
333 too
334
335 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2022 07:24:09 +0100
336
337 proxmox-installer (7.2-3) bullseye; urgency=medium
338
339 * create lvm: improve rounding/alignment
340
341 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 16:51:40 +0100
342
343 proxmox-installer (7.2-1) bullseye; urgency=medium
344
345 * zfs compression - fix wrongly added zle option
346
347 * fix #4236: split disk space check into soft and hard limits, warn
348 below 8 GB but only hard fail on 2 GB - which can never work
349
350 * fine tune swap selection for low memory/space setups
351
352 * lvm create: rework auto-space distribution and improve for low size
353 setups. Avoid a per-default extra free space block if the disk has
354 less than 32 GB of total space. Use the full rest size for root if
355 it's below 12 GB, not much of a point in setting up a data thin LVM
356 for guests then. Then also show a display message if no thin LVM is
357 created to inform the admin.
358
359 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 10:44:33 +0100
360
361 proxmox-installer (7.1-2) bullseye; urgency=medium
362
363 * disks: raid: avoid restting hdsize when reopening options
364
365 * drop trying to enable timesyncd, wrong since chrony switch & unnecessary
366 anyway
367
368 * remove /mnt/hostrun after install to avoid lingering directory
369
370 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Apr 2022 08:08:47 +0200
371
372 proxmox-installer (7.1-1) bullseye; urgency=medium
373
374 * init:
375 + add missing newline for chorny log message
376 + add hint that GUI should start and where to find potential errors
377 + do not sync on actual reboot, was already done after installation
378 finished
379
380 * proxmox-boot-preparation: add newline to /etc/kernel/cmdline
381
382 * display disk size with 2 decimal places
383
384 * zfs create: default to relatime
385
386 * fix #3905: allow lze/gzip/zstd compression for ZFS
387
388 * zfs: allow RAID0 with different-sized disks
389
390 * fix #3188: update hdsize spin-button on disk-selection change
391
392 * fix #3587: make hdsize configurable for btrfs setups
393
394 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Apr 2022 14:17:52 +0200
395
396 proxmox-installer (7.0-7) bullseye; urgency=medium
397
398 * Revert "bridged network: set bridge HW-address to port one", to subtle to
399 do as static configuration
400
401 * avoid copying packages into ram, bind-mount into target chroot and extract
402 directly
403
404 * unconfigured: avoid doing the reset "sysrq" if possible, prefer a normal
405 reboot system call.
406
407 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jul 2021 12:16:27 +0200
408
409 proxmox-installer (7.0-6) bullseye; urgency=medium
410
411 * bridged network: set bridge HW-address (MAC) to the one of the physical
412 port
413
414 * unconfigured: ifupdown is not used anymore, cope with that
415
416 * unconfigured: do not unmount /dev to early on shutdown
417
418 * unconfigured: only log about swap if there's actually one we can deactivate
419
420 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jul 2021 13:21:09 +0200
421
422 proxmox-installer (7.0-4) bullseye; urgency=medium
423
424 * clean disk: sort blockdevs by length to clean depth-first
425
426 * lvcreate: pass --yes to ensure wipesignatures is answered with go-
427 for-it
428
429 * try to make LVM less noisy regarding leaked file-descriptors
430
431 * network: sync bridge option names with pve-common
432
433 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 11:04:45 +0200
434
435 proxmox-installer (7.0-3) bullseye; urgency=medium
436
437 * pid1: shutdown: send a more friendly TERM signal first
438
439 * Proxmox VE: enable BTRFS support on installation as technology preview
440
441 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 23:03:22 +0200
442
443 proxmox-installer (7.0-2) bullseye; urgency=medium
444
445 * lvm: always tell lvm to wipe the signatures
446
447 * clean disk: pass all partitions separately to wipe2fs, as else it won't
448 bother cleaning up child ones
449
450 * disk preparation: make progress report for cleaning up disks slightly more
451 granular
452
453 * unconfigured: handle being the new PID 1
454
455 * unconfigured: heuristically detect high-dpi and adapt debugshell font and
456 GDK_SCALE for the wizard in that case
457
458 -- Proxmox Support Team <support@proxmox.com> Tue, 15 Jun 2021 15:07:04 +0200
459
460 proxmox-installer (7.0-1) bullseye; urgency=medium
461
462 * unify installer packages into single binary-package
463
464 * use wipefs to really clean the disks used for the root filesystem, as with
465 wiping only the partions through sgdik, things like LVS refuse to operate
466 if they find traces of existing LVs.
467
468 * override grub default config via installer instead of separate grub
469 package
470
471 * re-build for Debian 11 Bullseye based releases
472
473 -- Proxmox Support Team <support@proxmox.com> Tue, 25 May 2021 19:54:34 +0200
474
475 pve-installer (6.4-2) pmg pve; urgency=medium
476
477 * zfs: assume that all devices are boot devices as firmware is weird and
478 sometimes allows booting only from certain devices, which we cannot know
479 here, and potentially only the boot partition could be corrupted/broken/...
480 in which case another dev in the raid 0 could allow successful booting
481
482 * legacy BIOS: boot ZFS indirectly using proxmox-boot-tool and the vfat based
483 ESP as the primary boot partition to avoid issues with the ZFS
484 implementation of GRUB.
485
486 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Apr 2021 18:53:55 +0200
487
488 pve-installer (6.4-1) pmg pve; urgency=medium
489
490 * fix #2518: disk selector: add "deselect all" button if there are
491 more than three disks
492
493 * avoid triggering keyboard layout auto-selection heuristic if it was
494 changed explicitly
495
496 * partially fix #2804: set debug-console keymap on language selection
497
498 * fix #3223: fix hardcoded port value in success page html
499
500 * fix #3165: start chrony after DHCP client for an opportunistic time-sync
501
502 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 19:47:08 +0100
503
504 pve-installer (6.3-2) pmg pve; urgency=medium
505
506 * minor spelling/grammar fixes all over the place
507
508 * do not configure VT keyboard layout during installation, may hang the
509 installer
510
511 -- Proxmox Support Team <support@proxmox.com> Tue, 10 Nov 2020 15:03:14 +0100
512
513 pve-installer (6.3-1) pmg pve; urgency=medium
514
515 * fix #2925: edit /etc/kernel/cmdline unconditionally
516
517 * set console keymap on language selection
518
519 * fix #3057: remove ext3 option from installer
520
521 * pbs: actually write out email to user.cfg
522
523 * network: replace dot notation netmask with CIDR notation as primary input
524
525 * fix #3093: allow one to automatically reboot on installation success
526
527 -- Proxmox Support Team <support@proxmox.com> Sun, 08 Nov 2020 19:35:45 +0100
528
529 pve-installer (6.2-3) pmg pve; urgency=medium
530
531 * fix #2804: add a root shell on tty3
532
533 * pbs: update installation html texts
534
535 -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 15:37:04 +0200
536
537 pve-installer (6.2-2) pmg pve; urgency=medium
538
539 * write out network configuration in CIDR notation
540
541 * create default DS
542
543 -- Proxmox Support Team <support@proxmox.com> Mon, 25 May 2020 21:10:33 +0200
544
545 pve-installer (6.2-1) pmg pve; urgency=medium
546
547 * unconfigured: don't trap "bad" debug-shell exits
548
549 -- Proxmox Support Team <support@proxmox.com> Sun, 10 May 2020 21:21:10 +0200
550
551 pve-installer (6.1-4) pmg pve; urgency=medium
552
553 * unconfigured: allow pseudo terminals, mount devpts
554
555 * start installer window always in full screen mode
556
557 * improve spice integration
558
559 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Apr 2020 19:40:23 +0200
560
561 pve-installer (6.1-3) pmg pve; urgency=medium
562
563 * fix behavior if ZFS disks have no /dev/by-id path
564
565 * restrict admin email to same format as the JSONSchema
566
567 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2020 10:57:49 +0100
568
569 pve-installer (6.1-2) pmg pve; urgency=medium
570
571 * add all ZFS vdevs with stable by-id device path
572
573 * fix #1211: allow installation on 4k-native (4kn) disks booting with UEFI
574
575 -- Proxmox Support Team <support@proxmox.com> Wed, 27 Nov 2019 19:20:45 +0100
576
577 pve-installer (6.1-1) pmg pve; urgency=medium
578
579 * raise postifx main.cf compatibility_level to 2
580
581 * ensure /etc/aliases.db is generated
582
583 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 10:35:42 +0100
584
585 pve-installer (6.0-9) pmg pve; urgency=medium
586
587 * fix #2313: load country.dat file with utf8 encoding
588
589 -- Proxmox Support Team <support@proxmox.com> Sat, 17 Aug 2019 10:31:38 +0200
590
591 pve-installer (6.0-8) pmg pve; urgency=medium
592
593 * success screen: show real final IP addr with port
594
595 * handle bootloader installation errors gracefully
596
597 * efiboot: remove redundant call to zz-pve-efiboot
598
599 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jul 2019 12:40:37 +0200
600
601 pve-installer (6.0-5) pmg pve; urgency=medium
602
603 * hd_list: skip all devices with iso9660 as FS
604
605 * mount efivarfs to ensure we can read bigger EFI NVRAM backed variables
606
607 * fix #1603: create a new and unique machine-id
608
609 * copy /etc/hostid from installer root to target
610
611 * prompt user if a vgrename is OK for exisiting 'pve'/'pmg' VGs
612
613 * use pve-efiboot-tool for systemd boot ESP preparation
614
615 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:22:31 +0200
616
617 pve-installer (6.0-4) pmg pve; urgency=medium
618
619 * update systemd-boot config after initializing esps
620
621 * clear zpool labels on selected disks' partitions
622
623 * use by-id diskpath for zpool create
624
625 * warn if host memory is less than 1 GB
626
627 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jul 2019 18:10:06 +0200
628
629 pve-installer (6.0-3) pmg pve; urgency=medium
630
631 * add support for ZFS on EFI
632
633 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 14:03:21 +0200
634
635 pve-installer (6.0-2) pmg pve; urgency=medium
636
637 * add note regarding issues with ZFS on HW raid controller
638
639 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 10:27:54 +0200
640
641 pve-installer (6.0-1) pmg pve; urgency=medium
642
643 * bump for Debian Buster
644
645 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 10:02:08 +0200
646
647 pve-installer (5.0-26) unstable; urgency=medium
648
649 * ipconf view: only (re)set fields if nic really changed
650
651 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2019 14:39:35 +0100
652
653 pve-installer (5.0-25) unstable; urgency=medium
654
655 * add support for Citrix Hypervisor blockdev
656
657 * Fix #2009: Recreate hdsize_adj with new hdsize
658
659 * implement previous button
660
661 * implement summary/acknowledgement screen
662
663 -- Proxmox Support Team <support@proxmox.com> Thu, 14 Mar 2019 16:36:13 +0100
664
665 pve-installer (5.0-24) unstable; urgency=medium
666
667 * change last button to 'Install'
668
669 * Reset adjustment for spinbutton_hdsize
670
671 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2018 16:09:14 +0100
672
673 pve-installer (5.0-23) unstable; urgency=medium
674
675 * do not create a swap zvol
676
677 * unify and adapt disk partitioning
678
679 * fix #1527: Use 'iso-codes' package country naming
680
681 * allow more than 26 SCSI disk devices.
682
683 * fix various grammar and spelling errors
684
685 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2018 09:49:44 +0100
686
687 pve-installer (5.0-22) unstable; urgency=medium
688
689 * fix #1241: ensure at least 1G of thinpool metadata
690
691 * handle swapsize=0 correctly
692
693 * handle maxvz=0 correctly
694
695 * handle minfree=0 correctly
696
697 * handle local-only LVM setup
698
699 -- Proxmox Support Team <support@proxmox.com> Fri, 11 May 2018 13:17:42 +0200
700
701 pve-installer (5.0-21) unstable; urgency=medium
702
703 * ipconf.htm: remove pve product name
704
705 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 07:57:26 +0100
706
707 pve-installer (5.0-20) unstable; urgency=medium
708
709 * proxinstall: only display option maxroot for product pve
710
711 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Dec 2017 07:43:41 +0100
712
713 pve-installer (5.0-19) unstable; urgency=medium
714
715 * allow all valid netmasks
716
717 * html-pmg/extract1-license.htm: fix typo
718
719 -- Proxmox Support Team <support@proxmox.com> Thu, 14 Dec 2017 11:19:10 +0100
720
721 pve-installer (5.0-18) unstable; urgency=medium
722
723 * proxinstall - only creat ezfs data pool for product pve
724
725 -- Proxmox Support Team <support@proxmox.com> Thu, 23 Nov 2017 09:53:18 +0100
726
727 pve-installer (5.0-17) unstable; urgency=medium
728
729 * include svg files for installer banner
730
731 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 13:12:25 +0100
732
733 pve-installer (5.0-16) unstable; urgency=medium
734
735 * pmg: fix lvm volume sizes
736
737 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 10:26:38 +0100
738
739 pve-installer (5.0-15) unstable; urgency=medium
740
741 * dispaly info pages for 15 seconds
742
743 * Revert "change clamav daily database name to daily.cld"
744
745 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 09:29:16 +0100
746
747 pve-installer (5.0-14) unstable; urgency=medium
748
749 * correctly set PermitRootLogin in sshd_config
750
751 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 14:15:16 +0100
752
753 pve-installer (5.0-13) unstable; urgency=medium
754
755 * change clamav daily database name to daily.cld
756
757 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 12:31:13 +0100
758
759 pve-installer (5.0-12) unstable; urgency=medium
760
761 * pmg: write admin email to /etc/pmg/pmg.conf
762
763 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 10:26:59 +0100
764
765 pve-installer (5.0-11) unstable; urgency=medium
766
767 * pmg: write user.conf to correct location
768
769 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 09:56:40 +0100
770
771 pve-installer (5.0-10) unstable; urgency=medium
772
773 * bump version for testing
774
775 * implement proxmox mail gateway installation
776
777 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 08:05:02 +0100
778
779 pve-installer (5.0-8) unstable; urgency=medium
780
781 * add support for multiple products (pve, pmg)
782
783 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Nov 2017 12:47:44 +0100
784
785 pve-installer (5.0-7) unstable; urgency=medium
786
787 * kill dhclient before rebooting
788
789 * ZFS: explicitly export rpool after installation
790
791 * fix #1479: detect missing KVM support
792
793 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Oct 2017 10:56:30 +0200
794
795 pve-installer (5.0-6) unstable; urgency=medium
796
797 * fix console-setup
798
799 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Aug 2017 13:58:22 +0200
800
801 pve-installer (5.0-5) unstable; urgency=medium
802
803 * allow installing without active network devices
804
805 * fix bug in handling of invalid GeoIP results
806
807 -- Proxmox Support Team <support@proxmox.com> Wed, 9 Aug 2017 09:41:36 +0200
808
809 pve-installer (5.0-4) unstable; urgency=medium
810
811 * rework password and email text
812
813 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 09:49:38 +0200
814
815 pve-installer (5.0-3) unstable; urgency=medium
816
817 * let raid dialogue grow if > 4 disks
818
819 * add initial check for NICs
820
821 * ignore link-local addresses
822
823 * clean disks prior to formatting
824
825 * explicitly mount ESP as vfat
826
827 * zero start of partitions after formatting disk
828
829 * fix XFS mount options
830
831 -- Proxmox Support Team <support@proxmox.com> Fri, 5 May 2017 12:11:22 +0200
832
833 pve-installer (5.0-2) unstable; urgency=medium
834
835 * always select a NIC, even if DHCP fails
836
837 -- Proxmox Support Team <support@proxmox.com> Tue, 14 Mar 2017 09:44:30 +0100
838
839 pve-installer (5.0-1) unstable; urgency=medium
840
841 * rebuild for PVE 5.0
842
843 * fix #1239: enhance swap on ZFS setup
844
845 * use iproute2, support interface selection
846
847 * get DHCP leases on all interfaces
848
849 * only require grub-efi to succeed if booted using UEFI
850
851 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 13:03:43 +0100
852
853 pve-installer (4.0-16) unstable; urgency=medium
854
855 * actually use more than 8 disks if selected
856
857 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2016 10:05:54 +0100
858
859 pve-installer (4.0-15) unstable; urgency=medium
860
861 * use explicit partition starts
862
863 * bump EFI partition size to 256M
864
865 * compute_swapsize: add return statement
866
867 -- Proxmox Support Team <support@proxmox.com> Tue, 13 Dec 2016 09:12:20 +0100
868
869 pve-installer (4.0-14) unstable; urgency=medium
870
871 * bump version for new RELEASE=4.4
872
873 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Dec 2016 12:03:00 +0100
874
875 pve-installer (4.0-13) unstable; urgency=medium
876
877 * add default invalid mail address
878
879 * refactor disk setup
880
881 * add advanced ZFS options
882
883 * fix #1190: allow ZFS mirrors with slightly different sizes
884
885 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Dec 2016 10:48:19 +0100
886
887 pve-installer (4.0-12) unstable; urgency=medium
888
889 * fix update_progress while extracting files
890
891 * assume root file system is writable (overlayfs)
892
893 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Sep 2016 13:12:33 +0200
894
895 pve-installer (4.0-11) unstable; urgency=medium
896
897 * use unsquashfs instead of tar
898
899 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Aug 2016 08:49:30 +0200
900
901 pve-installer (4.0-10) unstable; urgency=medium
902
903 * Fix #1054: error on purely numeric hostnames
904
905 * update layout, use new logo
906
907 -- Proxmox Support Team <support@proxmox.com> Tue, 09 Aug 2016 09:46:31 +0200
908
909 pve-installer (4.0-8) unstable; urgency=medium
910
911 * restrict hdsize if requested
912
913 -- Proxmox Support Team <support@proxmox.com> Sun, 06 Mar 2016 09:04:44 +0100
914
915 pve-installer (4.0-7) unstable; urgency=medium
916
917 * use lvmthin for data volume
918
919 * create zfs subpool (rpool/data) as VM/CT storage
920
921 * create better default storage configiguration
922
923 -- Proxmox Support Team <support@proxmox.com> Tue, 01 Mar 2016 07:16:16 +0100
924
925 pve-installer (4.0-6) unstable; urgency=medium
926
927 * install EFI fallback boot file (OVMF does not boot without)
928
929 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 10:39:46 +0100
930
931 pve-installer (4.0-5) unstable; urgency=medium
932
933 * allow up to 8 zfs disks
934
935 * enable systemd-timesyncd.service by default
936
937 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Nov 2015 09:07:20 +0100
938
939 pve-installer (4.0-4) unstable; urgency=medium
940
941 * add ipv6 support
942
943 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2015 08:22:45 +0200
944
945 pve-installer (4.0-3) unstable; urgency=medium
946
947 * zpool create: use cachefile=none
948
949 * do not mention LVM snapshots
950
951 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 12:17:57 +0200
952
953 pve-installer (4.0-2) unstable; urgency=medium
954
955 * add xfs support
956
957 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:57:06 +0200
958
959 pve-installer (4.0-1) unstable; urgency=medium
960
961 * updates for debian jessie
962
963 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:56:54 +0200
964
965 pve-installer (3.3-3) unstable; urgency=low
966
967 * support ZFS
968
969 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jan 2015 09:39:28 +0100
970
971 pve-installer (3.3-2) unstable; urgency=low
972
973 * support UEFI systems
974
975 * add new 'Options' Dialog
976
977 * do not install xorg.conf (not needed, and makes problems with EFI boot)
978
979 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Oct 2014 09:16:03 +0200
980
981 pve-installer (3.3-1) unstable; urgency=low
982
983 * update path for 3.3 release
984
985 -- Proxmox Support Team <support@proxmox.com> Mon, 08 Sep 2014 12:08:14 +0200
986
987 pve-installer (3.0-2) unstable; urgency=low
988
989 * always use GUID partition tables
990
991 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jan 2014 16:00:25 +0100
992
993 pve-installer (3.0-1) unstable; urgency=low
994
995 * updates for debian wheezy
996
997 * use webkit instead of gthhtml2
998
999 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2013 06:39:42 +0100
1000
1001 pve-installer (2.3-6) unstable; urgency=low
1002
1003 * fix hdsize algorythm
1004
1005 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:32:00 +0100
1006
1007 pve-installer (2.0-5) unstable; urgency=low
1008
1009 * add 'hdsize' boot parameter to specify maximum size used.
1010
1011 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2012 06:18:55 +0100
1012
1013 pve-installer (2.0-4) unstable; urgency=low
1014
1015 * fix bug #226 && #227: new minfree and maxvz boot options
1016
1017 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jul 2012 05:51:47 +0200
1018
1019 pve-installer (2.0-3) unstable; urgency=low
1020
1021 * increase free space on LVM up to 16GB
1022
1023 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Feb 2012 11:59:55 +0100
1024
1025 pve-installer (2.0-2) unstable; urgency=low
1026
1027 * support new kernel parameter 'ext4' switch (use ext4 instead of ext3)
1028
1029 * use 'ext3' by default
1030
1031 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Aug 2011 12:58:27 +0200
1032
1033 pve-installer (2.0-1) unstable; urgency=low
1034
1035 * use ext4 fs
1036
1037 * align LVM on 128k boundary
1038
1039 * use 'parted' to create partitions
1040
1041 * support > 2TB disks (use GPT partition tables)
1042
1043 * mount with barrier=0 during install (speedup)
1044
1045 * write keyboard settings to /etc/pve-installer.cfg
1046
1047 * adjust for pve2
1048
1049 * avoid to run update-grub or update-initramfs during install
1050
1051 * use --no-triggers for faster unpack
1052
1053 * also mount sysfs to /target/sys
1054
1055 * do not write /etc/default/grub - not really needed
1056
1057 * we now use openbox instead of metacity
1058
1059 * wait one second after partitioning (give kernel time to reread part
1060 table)
1061
1062 * use update-initramfs -c (instead of -u)
1063
1064 * do not write /etc/apache2/ports.conf (not really needed)
1065
1066 * enable apache port redirect (a2ensite pve-redirect.conf)
1067
1068 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2010 14:09:46 +0100
1069
1070 pve-installer (1.0-9) unstable; urgency=low
1071
1072 * fix netmask bug
1073
1074 * use 'udevadm info' to detect disks
1075
1076 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:13:11 +0100
1077
1078 pve-installer (1.0-8) unstable; urgency=low
1079
1080 * use UUID= for /boot in fstab
1081
1082 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:11:58 +0100
1083
1084 pve-installer (1.0-7) unstable; urgency=low
1085
1086 * unconfigured.sh: use -q flag for modprobe
1087
1088 * proxinstall: use 'removable' flag on older kernels (instead
1089 of 'capability') to detect cdroms.
1090
1091 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 18:03:59 +0100
1092
1093 pve-installer (1.0-6) unstable; urgency=low
1094
1095 * pass --no-floppy to grub-install (some users reported delays)
1096
1097 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jun 2009 10:48:37 +0200
1098
1099 pve-installer (1.0-5) unstable; urgency=low
1100
1101 * fixes for debian lenny
1102
1103 * support dynamically allocated virtio blk devices
1104
1105 -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2009 16:53:42 +0200
1106
1107 pve-installer (1.0-4) unstable; urgency=low
1108
1109 * proxinstall: better postfix configuration
1110
1111 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jan 2009 12:21:13 +0100
1112
1113 pve-installer (1.0-3) unstable; urgency=low
1114
1115 * ause grub instead of lilo
1116
1117 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2008 14:39:57 +0200
1118
1119 pve-installer (1.0-2) stable; urgency=low
1120
1121 * proxinstall (extract_data): added maxroot and swapsize boot parameters,
1122 set bridge parameters (stp = on, fd = 0)
1123
1124 -- Proxmox Support Team <support@proxmox.com> Tue, 8 Jul 2008 06:54:03 +0200
1125
1126 pve-installer (1.0-1) stable; urgency=low
1127
1128 * initial release
1129
1130 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2007 15:48:05 +0100
1131