3 $ENV{DEBIAN_FRONTEND
} = 'noninteractive';
18 use String
::ShellQuote
;
23 use ProxmoxInstallerSetup
;
25 my $setup = ProxmoxInstallerSetup
::setup
();
29 if (!$ENV{G_SLICE
} || $ENV{G_SLICE
} ne "always-malloc") {
30 die "do not use slice allocator (run with 'G_SLICE=always-malloc ./proxinstall ...')\n";
33 if (!GetOptions
('testmode=s' => \
$opt_testmode)) {
38 my $zfstestpool = "test_rpool";
39 my $zfspoolname = $opt_testmode ?
$zfstestpool : 'rpool';
40 my $zfsrootvolname = "$setup->{product}-1";
42 my $storage_cfg_zfs = <<__EOD__;
45 content iso,vztmpl,backup
48 pool $zfspoolname/data
50 content images,rootdir
53 my $storage_cfg_btrfs = <<__EOD__;
56 content iso,vztmpl,backup
60 path /var/lib/pve/local-btrfs
61 content iso,vztmpl,backup,images,rootdir
64 my $storage_cfg_lvmthin = <<__EOD__;
67 content iso,vztmpl,backup
72 content rootdir,images
76 sub file_read_firstline
{
79 my $fh = IO
::File-
>new ($filename, "r");
87 my $logfd = IO
::File-
>new (">/tmp/install.log");
89 my $proxmox_libdir = $opt_testmode ?
90 Cwd
::cwd
() . "/testdir/var/lib/pve-installer" : "/var/lib/pve-installer";
91 my $proxmox_cddir = $opt_testmode ?
"../pve-cd-builder/tmp/data-gz/" : "/cdrom";
92 my $proxmox_pkgdir = "${proxmox_cddir}/proxmox/packages/";
94 my $grub_plattform = "pc"; # pc, efi-amd64 or efi-ia32
96 $grub_plattform = "efi-amd64" if -d
"/sys/firmware/efi";
98 my $IPV4OCTET = "(?:25[0-5]|(?:2[0-4]|1[0-9]|[1-9])?[0-9])";
99 my $IPV4RE = "(?:(?:$IPV4OCTET\\.){3}$IPV4OCTET)";
100 my $IPV6H16 = "(?:[0-9a-fA-F]{1,4})";
101 my $IPV6LS32 = "(?:(?:$IPV4RE|$IPV6H16:$IPV6H16))";
104 "(?:(?:" . "(?:$IPV6H16:){6})$IPV6LS32)|" .
105 "(?:(?:" . "::(?:$IPV6H16:){5})$IPV6LS32)|" .
106 "(?:(?:(?:" . "$IPV6H16)?::(?:$IPV6H16:){4})$IPV6LS32)|" .
107 "(?:(?:(?:(?:$IPV6H16:){0,1}$IPV6H16)?::(?:$IPV6H16:){3})$IPV6LS32)|" .
108 "(?:(?:(?:(?:$IPV6H16:){0,2}$IPV6H16)?::(?:$IPV6H16:){2})$IPV6LS32)|" .
109 "(?:(?:(?:(?:$IPV6H16:){0,3}$IPV6H16)?::(?:$IPV6H16:){1})$IPV6LS32)|" .
110 "(?:(?:(?:(?:$IPV6H16:){0,4}$IPV6H16)?::" . ")$IPV6LS32)|" .
111 "(?:(?:(?:(?:$IPV6H16:){0,5}$IPV6H16)?::" . ")$IPV6H16)|" .
112 "(?:(?:(?:(?:$IPV6H16:){0,6}$IPV6H16)?::" . ")))";
114 my $IPRE = "(?:$IPV4RE|$IPV6RE)";
117 my $ipv4_mask_hash = {
134 '255.255.128.0' => 17,
135 '255.255.192.0' => 18,
136 '255.255.224.0' => 19,
137 '255.255.240.0' => 20,
138 '255.255.248.0' => 21,
139 '255.255.252.0' => 22,
140 '255.255.254.0' => 23,
141 '255.255.255.0' => 24,
142 '255.255.255.128' => 25,
143 '255.255.255.192' => 26,
144 '255.255.255.224' => 27,
145 '255.255.255.240' => 28,
146 '255.255.255.248' => 29,
147 '255.255.255.252' => 30,
148 '255.255.255.254' => 31,
149 '255.255.255.255' => 32
152 my $ipv4_reverse_mask = [
188 my ($window, $cmdbox, $inbox, $htmlview);
189 my ($next, $next_fctn, $target_hd);
190 my ($progress, $progress_status);
191 my ($ipversion, $ipaddress, $ipconf_entry_addr);
192 my ($netmask, $ipconf_entry_mask);
193 my ($gateway, $ipconf_entry_gw);
194 my ($dnsserver, $ipconf_entry_dns);
195 my $hostname = 'proxmox';
196 my $domain = 'domain.tld';
197 my $cmdline = file_read_firstline
("/proc/cmdline");
200 my $timezone = 'Europe/Vienna';
203 my $keymap = 'en-us';
206 # parse command line args
208 my $config_options = {};
210 if ($cmdline =~ m/\s(ext3|ext4|xfs)(\s.*)?$/) {
211 $config_options->{filesys
} = $1;
213 $config_options->{filesys
} = 'ext4';
216 if ($cmdline =~ m/hdsize=(\d+(\.\d+)?)[\s\n]/i) {
217 $config_options->{hdsize
} = $1;
220 if ($cmdline =~ m/swapsize=(\d+(\.\d+)?)[\s\n]/i) {
221 $config_options->{swapsize
} = $1;
224 if ($cmdline =~ m/maxroot=(\d+(\.\d+)?)[\s\n]/i) {
225 $config_options->{maxroot
} = $1;
228 if ($cmdline =~ m/minfree=(\d+(\.\d+)?)[\s\n]/i) {
229 $config_options->{minfree
} = $1;
232 if ($setup->{product
} eq 'pve') {
233 if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
234 $config_options->{maxvz
} = $1;
238 my $postfix_main_cf = <<_EOD;
239 # See /usr/share/postfix/main.cf.dist for a commented, more complete version
243 smtpd_banner = \$myhostname ESMTP \$mail_name (Debian/GNU)
246 # appending .domain is the MUA's job.
247 append_dot_mydomain = no
249 # Uncomment the next line to generate "delayed mail" warnings
250 #delay_warning_time = 4h
252 alias_maps = hash:/etc/aliases
253 alias_database = hash:/etc/aliases
254 mydestination = \$myhostname, localhost.\$mydomain, localhost
256 mynetworks = 127.0.0.0/8
257 inet_interfaces = loopback-only
258 recipient_delimiter = +
265 return String
::ShellQuote
::shell_quote
($str);
271 die "no arguments" if !$cmd;
273 return $cmd if !ref($cmd);
276 foreach my $arg (@$cmd) { push @qa, shellquote
($arg); }
278 return join (' ', @qa);
284 return run_command
($cmd, undef, undef, 1);
288 my ($cmd, $func, $input, $noout) = @_;
294 # see 'man bash' for option pipefail
295 $cmd = [ '/bin/bash', '-c', "set -o pipefail && $cmd" ];
300 $cmdstr = cmd2string
($cmd);
304 if ($input && ($cmdstr !~ m/chpasswd/)) {
305 $cmdtxt = "# $cmdstr <<EOD\n$input";
307 $cmdtxt .= "\nEOD\n";
309 $cmdtxt = "# $cmdstr\n";
317 print $logfd $cmdtxt;
319 my $reader = IO
::File-
>new();
320 my $writer = IO
::File-
>new();
321 my $error = IO
::File-
>new();
327 $pid = open3
($writer, $reader, $error, @$cmd) || die $!;
333 if ($orig_pid != $$) {
340 print $writer $input if defined $input;
343 my $select = new IO
::Select
;
344 $select->add ($reader);
345 $select->add ($error);
347 my ($ostream, $logout) = ('', '', '');
349 while ($select->count) {
350 my @handles = $select->can_read (0.2);
352 Gtk3
::main_iteration
() while Gtk3
::events_pending
();
354 next if !scalar (@handles); # timeout
356 foreach my $h (@handles) {
358 my $count = sysread ($h, $buf, 4096);
359 if (!defined ($count)) {
363 die "command '$cmd' failed: $err";
365 $select->remove ($h) if !$count;
367 $ostream .= $buf if !($noout || $func);
369 while ($logout =~ s/^([^\010\r\n]*)(\r|\n|(\010)+|\r\n)//s) {
371 &$func($line) if $func;
374 } elsif ($h eq $error) {
375 $ostream .= $buf if !($noout || $func);
383 &$func($logout) if $func;
385 my $rv = waitpid ($pid, 0);
387 return $? if $noout; # behave like standard system();
390 die "command '$cmdstr' failed to execute\n";
391 } elsif (my $sig = ($? & 127)) {
392 die "command '$cmdstr' failed - got signal $sig\n";
393 } elsif (my $exitcode = ($? >> 8)) {
394 die "command '$cmdstr' failed with exit code $exitcode";
402 print "trying to detect country...\n";
403 my $cpid = open2
(\
*TMP
, undef, "traceroute -N 1 -q 1 -n 8.8.8.8");
404 return undef if !$cpid;
408 my $previous_alarm = alarm (10);
410 local $SIG{ALRM
} = sub { die "timed out!\n" };
412 while (defined ($line = <TMP
>)) {
413 print $logfd "DC TRACEROUTE: $line";
414 if ($line =~ m/\s*\d+\s+(\d+\.\d+\.\d+\.\d+)\s/) {
415 my $geoip = `geoiplookup $1`;
416 print $logfd "DC GEOIP: $geoip";
417 if ($geoip =~ m/GeoIP Country Edition:\s*([A-Z]+),/) {
419 print $logfd "DC FOUND: $country\n";
428 alarm ($previous_alarm);
433 print "unable to detect country - $err\n";
435 print "detected country: " . uc($country) . "\n";
437 print "unable to detect country\n";
445 open (MEMINFO, "/proc/meminfo");
447 my $res = 512; # default to 512 if something goes wrong
448 while (my $line = <MEMINFO>) {
449 if ($line =~ m/^MemTotal:\s+(\d+)\s*kB/i) {
450 $res = int ($1 / 1024);
459 my $total_memory = get_memtotal();
462 my ($src, $dest) = @_;
464 my ($dev1,$ino1) = stat ($src);
465 my ($dev2,$ino2) = stat ($dest);
467 return 0 if !($dev1 && $dev2 && $ino1 && $ino2);
469 return $ino1 == $ino2 && $dev1 == $dev2;
472 sub find_stable_path {
473 my ($stabledir, $bdev) = @_;
475 foreach my $path (<$stabledir/*>) {
476 if (link_points_to ($path, $bdev)) {
477 return wantarray ? ($path, basename($path)) : $path;
482 sub find_dev_by_uuid {
485 my ($full_path, $name) = find_stable_path ("/dev/disk/by-uuid", $bdev);
495 push @$res, [-1, $opt_testmode, int((-s $opt_testmode)/512), "TESTDISK"];
501 foreach my $bd (</sys/block/*>) {
502 next if $bd =~ m|^/sys/block/ram\d+$|;
503 next if $bd =~ m|^/sys/block/loop\d+$|;
504 next if $bd =~ m|^/sys/block/md\d+$|;
505 next if $bd =~ m|^/sys/block/dm-.*$|;
506 next if $bd =~ m|^/sys/block/fd\d+$|;
507 next if $bd =~ m|^/sys/block/sr\d+$|;
509 my $dev = file_read_firstline("$bd/dev");
514 my $info = `udevadm info
--path
$bd --query all
`;
517 next if $info !~ m/^E: DEVTYPE=disk$/m;
519 next if $info =~ m/^E: ID_CDROM/m;
521 my ($name) = $info =~ m/^N: (\S+)$/m;
524 my $real_name = "/dev/$name";
526 my $size = file_read_firstline("$bd/size");
528 $size = undef if !($size && $size =~ m/^\d+$/);
530 my $model = file_read_firstline("$bd/device/model") || '';
533 if (length ($model) > 30) {
534 $model = substr ($model, 0, 30);
536 push @$res, [$count++, $real_name, $size, $model] if $size;
538 print STDERR "ERROR: unable to map device $dev ($bd)\n";
546 my $countryfn = "${proxmox_libdir}/country.dat";
547 open (TMP, "<$countryfn") || die "unable to open '$countryfn' - $!\n";
550 my $countryhash = {};
553 while (defined ($line = <TMP>)) {
554 if ($line =~ m|^map:([^\s:]+):([^:]+):([^:]+):([^:]+):([^:]+):([^:]*):$|) {
562 $kmaphash->{$2} = $1;
563 } elsif ($line =~ m|^([a-z]{2}):([^:]+):([^:]*):([^:]*):$|) {
569 $countryhash->{lc($2)} = $1;
571 warn "unable to parse 'country.dat' line: $line";
578 my $zonefn = "/usr/share/zoneinfo/zone.tab";
579 open (TMP, "<$zonefn") || die "unable to open '$zonefn' - $!\n";
580 while (defined ($line = <TMP>)) {
581 next if $line =~ m/^\#/;
582 next if $line =~ m/^\s*$/;
583 if ($line =~ m|^([A-Z][A-Z])\s+\S+\s+(([^/]+)/\S+)\s|) {
585 $cczones->{$cc}->{$2} = 1;
586 $country->{$cc}->{zone} = $2 if !defined ($country->{$cc}->{zone});
597 countryhash => $countryhash,
599 kmaphash => $kmaphash,
603 # search for Harddisks
604 my $hds = hd_list ();
609 foreach my $hd (@$hds) {
610 my ($disk, $devname, $size, $model) = @$hd;
611 # size is always in 512B "sectors"! convert to KB
612 return int($size/2) if $devname eq $dev;
615 die "no such device '$dev'\n";
618 sub get_partition_dev {
619 my ($dev, $partnum) = @_;
621 if ($dev =~ m|^/dev/[hxsev]d[a-z]$|) {
622 return "${dev}$partnum";
623 } elsif ($dev =~ m|^/dev/[^/]+/c\d+d\d+$|) {
624 return "${dev}p$partnum";
625 } elsif ($dev =~ m|^/dev/[^/]+/d\d+$|) {
626 return "${dev}p$partnum";
627 } elsif ($dev =~ m|^/dev/[^/]+/hd[a-z]$|) {
628 return "${dev}$partnum";
629 } elsif ($dev =~ m|^/dev/nvme\d+n\d+$|) {
630 return "${dev}p$partnum";
632 die "unable to get device for partition $partnum on device $dev\n";
637 sub file_get_contents {
638 my ($filename, $max) = @_;
640 my $fh = IO::File->new($filename, "r") ||
641 die "can't open '$filename' - $!\n";
643 local $/; # slurp mode
653 my ($text, $filename) = @_;
655 my $fd = IO::File->new (">$filename") ||
656 die "unable to open file '$filename' - $!\n";
661 sub update_progress {
662 my ($frac, $start, $end, $text) = @_;
664 my $part = $end - $start;
665 my $res = $start + $frac*$part;
667 $progress->set_fraction ($res);
668 $progress->set_text (sprintf ("%d%%", int ($res*100)));
669 $progress_status->set_text ($text) if defined ($text);
671 display_info() if $res < 0.9;
673 Gtk3::main_iteration() while Gtk3::events_pending();
678 mkfs => 'mkfs.ext3 -F',
680 mkfs_data_opt => '-m 0',
681 root_mountopt => 'errors=remount-ro',
684 mkfs => 'mkfs.ext4 -F',
686 mkfs_data_opt => '-m 0',
687 root_mountopt => 'errors=remount-ro',
690 mkfs => 'mkfs.xfs -f',
697 sub create_filesystem {
698 my ($dev, $name, $type, $start, $end, $fs, $fe) = @_;
700 my $range = $end - $start;
701 my $rs = $start + $range*$fs;
702 my $re = $start + $range*$fe;
705 my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
706 my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
708 update_progress (0, $rs, $re, "creating $name filesystem");
710 run_command ("$fsdata->{mkfs} $opts $dev", sub {
713 if ($line =~ m/Writing inode tables:\s+(\d+)\/(\d+)/) {
715 } elsif ($max && $line =~ m/(\d+)\/$max/) {
716 update_progress (($1/$max)*0.9, $rs, $re);
717 } elsif ($line =~ m/Creating journal.*done/) {
718 update_progress (0.95, $rs, $re);
719 } elsif ($line =~ m/Writing superblocks and filesystem.*done/) {
720 update_progress (1, $rs, $re);
726 my ($targetdir, $dcdata) = @_;
728 my $cfgfile = "/tmp/debconf.txt";
729 write_config ($dcdata, "$targetdir/$cfgfile");
730 syscmd ("chroot $targetdir debconf-set-selections $cfgfile");
731 unlink "$targetdir/$cfgfile";
735 my ($targetdir, $cmd, $new_cmd) = @_;
737 syscmd ("chroot $targetdir dpkg-divert --package proxmox " .
738 "--add --rename $cmd") == 0 ||
739 die "unable to exec dpkg-divert\n";
741 syscmd ("ln -sf ${new_cmd} $targetdir/$cmd") == 0 ||
742 die "unable to link diversion to ${new_cmd}\n";
745 sub diversion_remove {
746 my ($targetdir, $cmd) = @_;
748 syscmd ("mv $targetdir/${cmd}.distrib $targetdir/${cmd};") == 0 ||
749 die "unable to remove $cmd diversion\n";
751 syscmd ("chroot $targetdir dpkg-divert --remove $cmd") == 0 ||
752 die "unable to remove $cmd diversion\n";
756 my ($partitions, $mode) = @_;
758 die "unknown btrfs mode '$mode'"
759 if !($mode eq 'single' || $mode eq 'raid0' ||
760 $mode eq 'raid1' || $mode eq 'raid10');
762 my $cmd = ['mkfs.btrfs', '-f'];
764 push @$cmd, '-d', $mode, '-m', $mode;
766 push @$cmd, @$partitions;
771 sub zfs_create_rpool {
774 my $cmd = "zpool create -f -o cachefile=none";
776 $cmd .= " -o ashift=$config_options->{ashift}"
777 if defined($config_options->{ashift});
779 syscmd ("$cmd $zfspoolname $vdev") == 0 ||
780 die "unable to create zfs root pool\n";
782 syscmd ("zfs create $zfspoolname/ROOT") == 0 ||
783 die "unable to create zfs $zfspoolname/ROOT volume\n";
785 if ($setup->{product} eq 'pve') {
786 syscmd ("zfs create $zfspoolname/data") == 0 ||
787 die "unable to create zfs $zfspoolname/data volume\n";
790 syscmd ("zfs create $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
791 die "unable to create zfs $zfspoolname/ROOT/$zfsrootvolname volume\n";
793 # disable atime during install
794 syscmd ("zfs set atime=off $zfspoolname") == 0 ||
795 die "unable to set zfs properties\n";
797 my $value = $config_options->{compress};
798 syscmd ("zfs set compression=$value $zfspoolname")
799 if defined($value) && $value ne 'off';
801 $value = $config_options->{checksum};
802 syscmd ("zfs set checksum=$value $zfspoolname")
803 if defined($value) && $value ne 'on';
805 $value = $config_options->{copies};
806 syscmd ("zfs set copies=$value $zfspoolname")
807 if defined($value) && $value != 1;
810 sub zfs_create_swap {
813 my $cmd = "zfs create -V ${swapsize}K -b 4K";
815 $cmd .= " -o com.sun:auto-snapshot=false";
817 # copies for swap does not make sense
818 $cmd .= " -o copies=1";
820 # reduces memory pressure
821 $cmd .= " -o sync=always";
823 # cheapest compression to drop zero pages
824 $cmd .= " -o compression=zle";
827 $cmd .= " -o logbias=throughput";
828 # only cache metadata in RAM (caching swap content does not make sense)
829 $cmd .= " -o primarycache=metadata";
830 # don't cache anything in L2ARC
831 $cmd .= " -o secondarycache=none";
833 $cmd .= " $zfspoolname/swap";
834 syscmd ($cmd) == 0 ||
835 die "unable to create zfs swap device\n";
837 return "/dev/zvol/$zfspoolname/swap";
840 my $udevadm_trigger_block = sub {
843 sleep(1) if !$nowait; # give kernel time to reread part table
845 # trigger udev to create /dev/disk/by-uuid
846 syscmd ("udevadm trigger --subsystem-match block");
847 syscmd ("udevadm settle --timeout 10");
850 my $clean_disk = sub {
853 my $partitions = `lsblk
--output kname
--noheadings
--path
--list
$disk`;
854 foreach my $part (split "\n", $partitions) {
855 next if $part eq $disk;
856 next if $part !~ /^\Q$disk\E/;
857 eval { syscmd
("pvremove -ff -y $part"); };
858 eval { syscmd
("dd if=/dev/zero of=$part bs=1M count=16"); };
862 sub partition_bootable_disk
{
863 my ($target_dev, $maxhdsize, $ptype) = @_;
865 die "too dangerous" if $opt_testmode;
867 die "unknown partition type '$ptype'"
868 if !($ptype eq '8E00' || $ptype eq '8300');
870 syscmd
("sgdisk -Z ${target_dev}");
871 my $hdsize = hd_size
($target_dev); # size in KB (1024 bytes)
873 my $restricted_hdsize_mb = 0; # 0 ==> end of partition
874 if ($maxhdsize && ($maxhdsize < $hdsize)) {
875 $hdsize = $maxhdsize;
876 $restricted_hdsize_mb = int($hdsize/1024) . 'M';
879 my $hdgb = int($hdsize/(1024*1024));
880 die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
882 # 1 - BIOS boot partition (Grub Stage2): first free 1M
883 # 2 - EFI ESP: next free 256M
884 # 3 - OS/Data partition: rest, up to $maxhdsize in MB
886 my $grubbootdev = get_partition_dev
($target_dev, 1);
887 my $efibootdev = get_partition_dev
($target_dev, 2);
888 my $osdev = get_partition_dev
($target_dev, 3);
890 my $pcmd = ['sgdisk'];
893 push @$pcmd, "-n${pnum}:1M:+1M", "-t$pnum:EF02";
896 push @$pcmd, "-n${pnum}:2M:+256M", "-t$pnum:EF00";
899 push @$pcmd, "-n${pnum}:258M:${restricted_hdsize_mb}", "-t$pnum:$ptype";
901 push @$pcmd, $target_dev;
903 my $os_size = $hdsize - 258*1024; # 256M + 1M + 1M alignment
905 syscmd
($pcmd) == 0 ||
906 die "unable to partition harddisk '${target_dev}'\n";
908 &$udevadm_trigger_block();
910 foreach my $part ($efibootdev, $osdev) {
911 syscmd
("dd if=/dev/zero of=$part bs=1M count=256") if -b
$part;
914 return ($os_size, $osdev, $efibootdev);
917 # ZFS has this use_whole_disk concept, so we try to partition the same
918 # way as zfs does by default. There is room at start of disk to insert
919 # a grub boot partition. But adding a EFI ESP is not possible.
921 # Note: zfs people think this is just a waste of space an not
922 # required. Instead, you should put the ESP on another disk (log,
925 sub partition_bootable_zfs_disk
{
926 my ($target_dev) = @_;
928 die "too dangerous" if $opt_testmode;
930 syscmd
("sgdisk -Z ${target_dev}");
931 my $hdsize = hd_size
($target_dev); # size in blocks (1024 bytes)
933 my $hdgb = int($hdsize/(1024*1024));
934 die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
936 # 1 - GRUB boot partition: 1M
937 # 2 - OS/Data partition
938 # 9 - ZFS reserved partition
940 my $grubbootdev = get_partition_dev
($target_dev, 1);
941 my $osdev = get_partition_dev
($target_dev, 2);
943 my $pcmd = ['sgdisk', '-a1'];
946 push @$pcmd, "-n$pnum:34:2047", "-t$pnum:EF02";
949 push @$pcmd, "-n$pnum:-8M:0", "-t$pnum:BF07";
952 push @$pcmd, "-n$pnum:2048:0", "-t$pnum:BF01", '-c', "$pnum:zfs";
954 push @$pcmd, $target_dev;
956 my $os_size = $hdsize - 1024 - 1024*8;
958 syscmd
($pcmd) == 0 ||
959 die "unable to partition harddisk '${target_dev}'\n";
961 &$udevadm_trigger_block();
963 syscmd
("dd if=/dev/zero of=$osdev bs=1M count=16") if -b
$osdev;
965 return ($os_size, $osdev);
968 sub create_lvm_volumes
{
969 my ($lvmdev, $os_size, $swap_size) = @_;
971 my $vgname = $setup->{product
};
973 my $rootdev = "/dev/$vgname/root";
974 my $datadev = "/dev/$vgname/data";
977 # we use --metadatasize 250k, which results in "pe_start = 512"
978 # so pe_start is aligned on a 128k boundary (advantage for SSDs)
979 syscmd
("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
980 die "unable to initialize physical volume $lvmdev\n";
981 syscmd
("/sbin/vgcreate $vgname $lvmdev") == 0 ||
982 die "unable to create volume group '$vgname'\n";
984 my $hdgb = int($os_size/(1024*1024));
985 my $space = (($hdgb > 128) ?
16 : ($hdgb/8))*1024*1024;
990 if ($setup->{product
} eq 'pve') {
993 if ($config_options->{maxroot
}) {
994 $maxroot = $config_options->{maxroot
};
999 $rootsize = (($hdgb > ($maxroot*4)) ?
$maxroot : $hdgb/4)*1024*1024;
1001 my $rest = $os_size - $swap_size - $rootsize; # in KB
1004 if (defined($config_options->{minfree
})) {
1005 $minfree = (($config_options->{minfree
}*1024*1024) >= $rest ) ?
$space :
1006 $config_options->{minfree
}*1024*1024 ;
1011 $rest = $rest - $minfree;
1013 if (defined($config_options->{maxvz
})) {
1014 $rest = (($config_options->{maxvz
}*1024*1024) <= $rest) ?
1015 $config_options->{maxvz
}*1024*1024 : $rest;
1021 my $minfree = defined($config_options->{minfree
}) ?
$config_options->{minfree
}*1024*1024 : $space;
1022 $rootsize = $os_size - $minfree - $swap_size; # in KB
1026 syscmd
("/sbin/lvcreate -L${swap_size}K -nswap $vgname") == 0 ||
1027 die "unable to create swap volume\n";
1029 $swapfile = "/dev/$vgname/swap";
1032 syscmd
("/sbin/lvcreate -L${rootsize}K -nroot $vgname") == 0 ||
1033 die "unable to create root volume\n";
1035 if ($datasize > 4*1024*1024) {
1036 my $metadatasize = $datasize/100; # default 1% of data
1037 $metadatasize = 1024*1024 if $metadatasize < 1024*1024; # but at least 1G
1038 $metadatasize = 16*1024*1024 if $metadatasize > 16*1024*1024; # but at most 16G
1040 # otherwise the metadata is taken out of $minfree
1041 $datasize -= 2*$metadatasize;
1043 # 1 4MB PE to allow for rounding
1044 $datasize -= 4*1024;
1046 syscmd
("/sbin/lvcreate -L${datasize}K -ndata $vgname") == 0 ||
1047 die "unable to create data volume\n";
1049 syscmd
("/sbin/lvconvert --yes --type thin-pool --poolmetadatasize ${metadatasize}K $vgname/data") == 0 ||
1050 die "unable to create data thin-pool\n";
1055 syscmd
("/sbin/vgchange -a y $vgname") == 0 ||
1056 die "unable to activate volume group\n";
1058 return ($rootdev, $swapfile, $datadev);
1061 sub compute_swapsize
{
1064 my $hdgb = int($hdsize/(1024*1024));
1067 if (defined($config_options->{swapsize
})) {
1068 $swapsize = $config_options->{swapsize
}*1024*1024;
1070 my $ss = int ($total_memory / 1024);
1072 $ss = ($hdgb/8) if $ss > ($hdgb/8);
1074 $swapsize = $ss*1024*1024;
1082 my ($basefile, $targetdir) = @_;
1084 die "target '$targetdir' does not exist\n" if ! -d
$targetdir;
1086 my $starttime = [Time
::HiRes
::gettimeofday
];
1088 my $bootdevinfo = [];
1096 my $filesys = $config_options->{filesys
};
1098 if ($filesys =~ m/zfs/) {
1099 $target_hd = undef; # do not use this config
1101 $targetdir = "/$zfspoolname/ROOT/$zfsrootvolname";
1102 } elsif ($filesys =~ m/btrfs/) {
1103 $target_hd = undef; # do not use this config
1109 for ($i = 5; $i > 0; $i--) {
1110 syscmd
("modprobe zfs");
1111 last if -c
"/dev/zfs";
1115 die "unable to load zfs kernel module\n" if !$i;
1123 update_progress
(0, 0, $maxper, "create partitions");
1125 syscmd
("vgchange -an") if !$opt_testmode; # deactivate all detected VGs
1127 if ($opt_testmode) {
1129 $rootdev = abs_path
($opt_testmode);
1130 syscmd
("umount $rootdev");
1134 die "unsupported btrfs mode (for testing environment)\n"
1135 if $filesys ne 'btrfs (RAID0)';
1137 btrfs_create
([$rootdev], 'single');
1139 } elsif ($use_zfs) {
1141 die "unsupported zfs mode (for testing environment)\n"
1142 if $filesys ne 'zfs (RAID0)';
1144 syscmd
("zpool destroy $zfstestpool");
1146 zfs_create_rpool
($rootdev);
1153 } elsif ($use_btrfs) {
1155 my ($devlist, $btrfs_mode) = get_btrfs_raid_setup
();
1156 my $btrfs_partitions = [];
1158 foreach my $hd (@$devlist) {
1159 my $devname = @$hd[1];
1160 &$clean_disk($devname);
1161 my ($size, $osdev, $efidev) =
1162 partition_bootable_disk
($devname, undef, '8300');
1163 $rootdev = $osdev if !defined($rootdev); # simply point to first disk
1164 my $by_id = find_stable_path
("/dev/disk/by-id", $devname);
1165 push @$bootdevinfo, { esp
=> $efidev, devname
=> $devname,
1166 osdev
=> $osdev, by_id
=> $by_id };
1167 push @$btrfs_partitions, $osdev;
1171 &$udevadm_trigger_block();
1173 btrfs_create
($btrfs_partitions, $btrfs_mode);
1175 } elsif ($use_zfs) {
1177 my ($devlist, $bootdevlist, $vdev) = get_zfs_raid_setup
();
1180 foreach my $hd (@$devlist) {
1181 &$clean_disk(@$hd[1]);
1183 foreach my $hd (@$bootdevlist) {
1184 my $devname = @$hd[1];
1185 my ($size, $osdev) =
1186 partition_bootable_zfs_disk
($devname);
1187 zfs_mirror_size_check
($disksize, $size) if $disksize;
1188 push @$bootdevinfo, { devname
=> $devname, osdev
=> $osdev};
1192 &$udevadm_trigger_block();
1194 foreach my $di (@$bootdevinfo) {
1195 my $devname = $di->{devname
};
1196 $di->{by_id
} = find_stable_path
("/dev/disk/by-id", $devname);
1198 # Note: using /dev/disk/by-id/ does not work for unknown reason, we get
1199 # cannot create 'rpool': no such pool or dataset
1200 #my $osdev = find_stable_path ("/dev/disk/by-id", $di->{osdev}) || $di->{osdev};
1202 my $osdev = $di->{osdev
};
1203 $vdev =~ s/ $devname/ $osdev/;
1206 zfs_create_rpool
($vdev);
1208 my $swap_size = compute_swapsize
($disksize);
1209 $swapfile = zfs_create_swap
($swap_size) if $swap_size;
1213 die "target '$target_hd' is not a valid block device\n" if ! -b
$target_hd;
1216 if ($config_options->{hdsize
}) {
1217 # max hdsize passed on cmdline (GB)
1218 $maxhdsize = $config_options->{hdsize
}*1024*1024;
1221 &$clean_disk($target_hd);
1223 my ($os_size, $osdev, $efidev);
1224 ($os_size, $osdev, $efidev) =
1225 partition_bootable_disk
($target_hd, $maxhdsize, '8E00');
1227 &$udevadm_trigger_block();
1229 my $by_id = find_stable_path
("/dev/disk/by-id", $target_hd);
1230 push @$bootdevinfo, { esp
=> $efidev, devname
=> $target_hd,
1231 osdev
=> $osdev, by_id
=> $by_id };
1233 my $swap_size = compute_swapsize
($os_size);
1234 ($rootdev, $swapfile) =
1235 create_lvm_volumes
($osdev, $os_size, $swap_size);
1237 # trigger udev to create /dev/disk/by-uuid
1238 &$udevadm_trigger_block(1);
1242 # to be fast during installation
1243 syscmd
("zfs set sync=disabled $zfspoolname") == 0 ||
1244 die "unable to set zfs properties\n";
1247 update_progress
(0.03, 0, $maxper, "create swap space");
1249 syscmd
("mkswap -f $swapfile") == 0 ||
1250 die "unable to create swap space\n";
1253 update_progress
(0.05, 0, $maxper, "creating filesystems");
1255 foreach my $di (@$bootdevinfo) {
1256 next if !$di->{esp
};
1257 syscmd
("mkfs.vfat -F32 $di->{esp}") == 0 ||
1258 die "unable to initialize EFI ESP on device $di->{esp}\n";
1263 } elsif ($use_btrfs) {
1266 create_filesystem
($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1);
1269 update_progress
(1, 0.05, $maxper, "mounting target $rootdev");
1274 my $mount_opts = 'noatime';
1275 $mount_opts .= ',nobarrier'
1276 if $use_btrfs || $filesys =~ /^ext\d$/;
1278 syscmd
("mount -n $rootdev -o $mount_opts $targetdir") == 0 ||
1279 die "unable to mount $rootdev\n";
1282 mkdir "$targetdir/boot";
1283 mkdir "$targetdir/boot/efi";
1285 mkdir "$targetdir/var";
1286 mkdir "$targetdir/var/lib";
1288 if ($setup->{product
} eq 'pve') {
1289 mkdir "$targetdir/var/lib/vz";
1290 mkdir "$targetdir/var/lib/pve";
1293 syscmd
("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
1294 die "unable to create btrfs subvolume\n";
1298 update_progress
(1, 0.05, $maxper, "extracting base system");
1300 my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
1301 $ino || die "unable to open file '$basefile' - $!\n";
1303 my $files = file_read_firstline
("${proxmox_cddir}/proxmox/$setup->{product}-base.cnt") ||
1304 die "unable to read base file count\n";
1309 run_command
("unsquashfs -f -dest $targetdir -i $basefile", sub {
1311 return if $line !~ m/^$targetdir/;
1313 my $nper = int (($count *100)/$files);
1314 if ($nper != $per) {
1316 my $frac = $per > 100 ?
1 : $per/100;
1317 update_progress
($frac, $maxper, 0.5);
1321 syscmd
("mount -n -t tmpfs tmpfs $targetdir/tmp") == 0 ||
1322 die "unable to mount tmpfs on $targetdir/tmp\n";
1323 syscmd
("mount -n -t proc proc $targetdir/proc") == 0 ||
1324 die "unable to mount proc on $targetdir/proc\n";
1325 syscmd
("mount -n -t sysfs sysfs $targetdir/sys") == 0 ||
1326 die "unable to mount sysfs on $targetdir/sys\n";
1328 update_progress
(1, $maxper, 0.5, "configuring base system");
1333 "127.0.0.1 localhost.localdomain localhost\n" .
1334 "$ipaddress $hostname.$domain $hostname pvelocalhost\n\n" .
1335 "# The following lines are desirable for IPv6 capable hosts\n\n" .
1336 "::1 ip6-localhost ip6-loopback\n" .
1337 "fe00::0 ip6-localnet\n" .
1338 "ff00::0 ip6-mcastprefix\n" .
1339 "ff02::1 ip6-allnodes\n" .
1340 "ff02::2 ip6-allrouters\n" .
1341 "ff02::3 ip6-allhosts\n";
1343 write_config
($hosts, "$targetdir/etc/hosts");
1345 write_config
("$hostname\n", "$targetdir/etc/hostname");
1347 syscmd
("/bin/hostname $hostname") if !$opt_testmode;
1349 # configure interfaces
1351 my $ifaces = "auto lo\niface lo inet loopback\n\n";
1353 my $ntype = $ipversion == 4 ?
'inet' : 'inet6';
1355 my $ethdev = $ipconf->{ifaces
}->{$ipconf->{selected
}}->{name
};
1357 if ($setup->{bridged_network
}) {
1358 $ifaces .= "iface $ethdev $ntype manual\n";
1361 "\nauto vmbr0\niface vmbr0 $ntype static\n" .
1362 "\taddress $ipaddress\n" .
1363 "\tnetmask $netmask\n" .
1364 "\tgateway $gateway\n" .
1365 "\tbridge_ports $ethdev\n" .
1366 "\tbridge_stp off\n" .
1369 $ifaces .= "auto $ethdev\n" .
1370 "iface $ethdev $ntype static\n" .
1371 "\taddress $ipaddress\n" .
1372 "\tnetmask $netmask\n" .
1373 "\tgateway $gateway\n";
1376 foreach my $iface (sort keys %{$ipconf->{ifaces
}}) {
1377 my $name = $ipconf->{ifaces
}->{$iface}->{name
};
1378 next if $name eq $ethdev;
1380 $ifaces .= "\niface $name $ntype manual\n";
1383 write_config
($ifaces, "$targetdir/etc/network/interfaces");
1387 my $resolvconf = "search $domain\nnameserver $dnsserver\n";
1388 write_config
($resolvconf, "$targetdir/etc/resolv.conf");
1392 my $fstab = "# <file system> <mount point> <type> <options> <dump> <pass>\n";
1396 } elsif ($use_btrfs) {
1398 my $cmd = "blkid -u filesystem -t TYPE=btrfs -o export $rootdev";
1399 run_command
($cmd, sub {
1402 if ($line =~ m/^UUID=([A-Fa-f0-9\-]+)$/) {
1407 die "unable to detect FS UUID" if !defined($fsuuid);
1409 $fstab .= "UUID=$fsuuid / btrfs defaults 0 1\n";
1411 my $root_mountopt = $fssetup->{$filesys}->{root_mountopt
} || 'defaults';
1412 $fstab .= "$rootdev / $filesys ${root_mountopt} 0 1\n";
1416 # Note: this is required by current grub, but really dangerous, because
1417 # vfat does not have journaling, so it triggers manual fsck after each crash
1418 # so we only mount /boot/efi if really required (efi systems).
1419 if ($grub_plattform =~ m/^efi-/) {
1420 if (scalar(@$bootdevinfo)) {
1421 my $di = @$bootdevinfo[0]; # simply use first disk
1423 my $efi_boot_uuid = $di->{esp
};
1424 if (my $uuid = find_dev_by_uuid
($di->{esp
})) {
1425 $efi_boot_uuid = "UUID=$uuid";
1428 $fstab .= "${efi_boot_uuid} /boot/efi vfat defaults 0 1\n";
1434 $fstab .= "$swapfile none swap sw 0 0\n" if $swapfile;
1436 $fstab .= "proc /proc proc defaults 0 0\n";
1438 write_config
($fstab, "$targetdir/etc/fstab");
1439 write_config
("", "$targetdir/etc/mtab");
1441 syscmd
("cp ${proxmox_libdir}/policy-disable-rc.d " .
1442 "$targetdir/usr/sbin/policy-rc.d") == 0 ||
1443 die "unable to copy policy-rc.d\n";
1444 syscmd
("cp ${proxmox_libdir}/fake-start-stop-daemon " .
1445 "$targetdir/sbin/") == 0 ||
1446 die "unable to copy start-stop-daemon\n";
1448 diversion_add
($targetdir, "/sbin/start-stop-daemon", "/sbin/fake-start-stop-daemon");
1449 diversion_add
($targetdir, "/usr/sbin/update-grub", "/bin/true");
1450 diversion_add
($targetdir, "/usr/sbin/update-initramfs", "/bin/true");
1452 syscmd
("touch $targetdir/proxmox_install_mode");
1454 my $grub_install_devices_txt = '';
1455 foreach my $di (@$bootdevinfo) {
1456 $grub_install_devices_txt .= ', ' if $grub_install_devices_txt;
1457 $grub_install_devices_txt .= $di->{by_id
} || $di->{devname
};
1460 # Note: keyboard-configuration/xbkb-keymap is used by console-setup
1461 my $xkmap = $cmap->{kmap
}->{$keymap}->{x11
} // 'us';
1463 debconfig_set
($targetdir, <<_EOD);
1464 locales locales/default_environment_locale select en_US.UTF-8
1465 locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
1466 samba-common samba-common/dhcp boolean false
1467 samba-common samba-common/workgroup string WORKGROUP
1468 postfix postfix/main_mailer_type select No configuration
1469 keyboard-configuration keyboard-configuration/xkb-keymap select $xkmap
1470 d-i debian-installer/locale select en_US.UTF-8
1471 grub-pc grub-pc/install_devices select $grub_install_devices_txt
1475 while (<${proxmox_pkgdir
}/*.deb
>) { $pkg_count++ };
1477 # btrfs/dpkg is extremely slow without --force-unsafe-io
1478 my $dpkg_opts = $use_btrfs ?
"--force-unsafe-io" : "";
1481 while (<${proxmox_pkgdir
}/*.deb
>) {
1484 my ($deb) = $path =~ m/${proxmox_pkgdir}\/(.*\
.deb
)/;
1485 # if ($deb =~ m/^grub-efi-/ && $deb !~ m/^grub-${grub_plattform}/) {
1489 update_progress
($count/$pkg_count, 0.5, 0.75, "extracting $deb");
1490 print "extracting: $deb\n";
1491 syscmd
("cp $path $targetdir/tmp/$deb") == 0 ||
1492 die "installation of package $deb failed\n";
1493 syscmd
("chroot $targetdir dpkg $dpkg_opts --force-depends --no-triggers --unpack /tmp/$deb") == 0 ||
1494 die "installation of package $deb failed\n";
1495 update_progress
((++$count)/$pkg_count, 0.5, 0.75);
1498 # needed for postfix postinst in case no other NIC is active
1499 syscmd
("chroot $targetdir ifup lo");
1501 my $cmd = "chroot $targetdir dpkg $dpkg_opts --force-confold --configure -a";
1503 run_command
($cmd, sub {
1505 if ($line =~ m/Setting up\s+(\S+)/) {
1506 update_progress
((++$count)/$pkg_count, 0.75, 0.95,
1511 unlink "$targetdir/etc/mailname";
1512 $postfix_main_cf =~ s/__FQDN__/${hostname}.${domain}/;
1513 write_config
($postfix_main_cf, "$targetdir/etc/postfix/main.cf");
1515 # make sure we have all postfix directories
1516 syscmd
("chroot $targetdir /usr/sbin/postfix check");
1517 # cleanup mail queue
1518 syscmd
("chroot $targetdir /usr/sbin/postsuper -d ALL");
1520 # enable NTP (timedatectl set-ntp true does not work without DBUS)
1521 syscmd
("chroot $targetdir /bin/systemctl enable systemd-timesyncd.service");
1523 unlink "$targetdir/proxmox_install_mode";
1526 unlink ("$targetdir/etc/localtime");
1527 symlink ("/usr/share/zoneinfo/$timezone", "$targetdir/etc/localtime");
1528 write_config
("$timezone\n", "$targetdir/etc/timezone");
1531 if (my $mirror = $cmap->{country
}->{$country}->{mirror
}) {
1532 my $fn = "$targetdir/etc/apt/sources.list";
1533 syscmd
("sed -i 's/ftp\\.debian\\.org/$mirror/' '$fn'");
1536 # create extended_states for apt (avoid cron job warning if that
1537 # file does not exist)
1538 write_config
('', "$targetdir/var/lib/apt/extended_states");
1540 # allow ssh root login
1541 syscmd
(['sed', '-i', 's/^#\?PermitRootLogin.*/PermitRootLogin yes/', "$targetdir/etc/ssh/sshd_config"]);
1543 if ($setup->{product
} eq 'pmg') {
1544 # install initial clamav DB
1545 my $srcdir = "${proxmox_cddir}/proxmox/clamav";
1546 foreach my $fn ("main.cvd", "bytecode.cvd", "daily.cvd", "safebrowsing.cvd") {
1547 syscmd
("cp \"$srcdir/$fn\" \"$targetdir/var/lib/clamav\"") == 0 ||
1548 die "installation of clamav db file '$fn' failed\n";
1550 syscmd
("chroot $targetdir /bin/chown clamav:clamav -R /var/lib/clamav") == 0 ||
1551 die "unable to set owner for clamav database files\n";
1554 if ($setup->{product
} eq 'pve') {
1555 # save installer settings
1556 my $ucc = uc ($country);
1557 debconfig_set
($targetdir, "pve-manager pve-manager/country string $ucc\n");
1560 update_progress
(0.8, 0.95, 1, "make system bootable");
1563 syscmd
("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/$zfsrootvolname boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
1564 die "unable to update /etc/default/grub\n";
1568 diversion_remove
($targetdir, "/usr/sbin/update-grub");
1569 diversion_remove
($targetdir, "/usr/sbin/update-initramfs");
1572 foreach my $fn (<$targetdir/lib/modules/*>) {
1573 if ($fn =~ m!/(\d+\.\d+\.\d+-\d+-pve)$!) {
1574 die "found multiple kernels\n" if defined($kapi);
1578 die "unable to detect kernel version\n" if !defined($kapi);
1580 if (!$opt_testmode) {
1582 unlink ("$targetdir/etc/mtab");
1583 symlink ("/proc/mounts", "$targetdir/etc/mtab");
1584 syscmd
("mount -n --bind /dev $targetdir/dev");
1586 syscmd
("chroot $targetdir /usr/sbin/update-initramfs -c -k $kapi") == 0 ||
1587 die "unable to install initramfs\n";
1589 foreach my $di (@$bootdevinfo) {
1590 my $dev = $di->{devname
};
1591 syscmd
("chroot $targetdir /usr/sbin/grub-install --target i386-pc --no-floppy --bootloader-id='proxmox' $dev") == 0 ||
1592 die "unable to install the i386-pc boot loader on '$dev'\n";
1595 syscmd
("mount -n $di->{esp} -t vfat $targetdir/boot/efi") == 0 ||
1596 die "unable to mount $di->{esp}\n";
1597 my $rc = syscmd
("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev");
1599 if (-d
'/sys/firmware/efi') {
1600 die "unable to install the EFI boot loader on '$dev'\n";
1602 warn "unable to install the EFI boot loader on '$dev', ignoring (not booted using UEFI)\n";
1605 # also install fallback boot file (OVMF does not boot without)
1606 mkdir("$targetdir/boot/efi/EFI/BOOT");
1607 syscmd
("cp $targetdir/boot/efi/EFI/proxmox/grubx64.efi $targetdir/boot/efi/EFI/BOOT/BOOTx64.EFI") == 0 ||
1608 die "unable to copy efi boot loader\n";
1610 syscmd
("umount $targetdir/boot/efi") == 0 ||
1611 die "unable to umount $targetdir/boot/efi\n";
1615 syscmd
("chroot $targetdir /usr/sbin/update-grub") == 0 ||
1616 die "unable to update boot loader config\n";
1618 syscmd
("umount $targetdir/dev");
1623 # hack: remove dead.letter from sshd installation
1624 syscmd
("rm -rf $targetdir/dead.letter");
1626 unlink "$targetdir/usr/sbin/policy-rc.d";
1628 diversion_remove
($targetdir, "/sbin/start-stop-daemon");
1631 my $octets = encode
("utf-8", $password);
1632 run_command
("chroot $targetdir /usr/sbin/chpasswd", undef,
1635 if ($setup->{product
} eq 'pmg') {
1637 write_config
("section: admin\n\temail ${mailto}\n",
1638 "$targetdir/etc/pmg/pmg.conf");
1640 } elsif ($setup->{product
} eq 'pve') {
1644 my $tmpdir = "$targetdir/tmp/pve";
1647 # write vnc keymap to datacenter.cfg
1648 my $vnckmap = $cmap->{kmap
}->{$keymap}->{kvm
} || 'en-us';
1649 write_config
("keyboard: $vnckmap\n",
1650 "$tmpdir/datacenter.cfg");
1653 write_config
("user:root\@pam:1:0:::${mailto}::\n",
1654 "$tmpdir/user.cfg");
1657 my $strorage_cfg_fn = "$tmpdir/storage.cfg";
1659 write_config
($storage_cfg_zfs, $strorage_cfg_fn);
1660 } elsif ($use_btrfs) {
1661 write_config
($storage_cfg_btrfs, $strorage_cfg_fn);
1663 write_config
($storage_cfg_lvmthin, $strorage_cfg_fn);
1666 run_command
("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
1668 syscmd
("rm -rf $tmpdir");
1674 update_progress
(1, 0, 1, "");
1678 if ($opt_testmode) {
1679 my $elapsed = Time
::HiRes
::tv_interval
($starttime);
1680 print "Elapsed extract time: $elapsed\n";
1682 syscmd
("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> final.pkglist");
1685 syscmd
("umount $targetdir/tmp");
1686 syscmd
("umount $targetdir/proc");
1687 syscmd
("umount $targetdir/sys");
1690 syscmd
("zfs umount -a") == 0 ||
1691 die "unable to unmount zfs\n";
1693 syscmd
("umount -d $targetdir");
1696 if (!$err && $use_zfs) {
1697 syscmd
("zfs set sync=standard $zfspoolname") == 0 ||
1698 die "unable to set zfs properties\n";
1700 syscmd
("zfs set mountpoint=/ $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
1701 die "zfs set mountpoint failed\n";
1703 syscmd
("zpool set bootfs=$zfspoolname/ROOT/$zfsrootvolname $zfspoolname") == 0 ||
1704 die "zfs set bootfs failed\n";
1705 syscmd
("zpool export $zfspoolname");
1711 my $last_display_change = 0;
1713 my $display_info_counter = 0;
1715 my $display_info_items = [
1716 "extract1-license.htm",
1717 "extract2-rulesystem.htm",
1718 "extract3-spam.htm",
1719 "extract4-virus.htm",
1724 my $min_display_time = 15;
1728 return if ($ctime - $last_display_change) < $min_display_time;
1730 my $page = $display_info_items->[$display_info_counter % scalar(@$display_info_items)];
1732 $display_info_counter++;
1734 display_html
($page);
1738 my ($filename) = @_;
1740 my $path = "${proxmox_libdir}/html/$filename";
1742 my $url = "file://$path";
1744 my $data = file_get_contents
($path);
1746 if ($filename eq 'license.htm') {
1747 my $license = decode
('utf8', file_get_contents
("${proxmox_cddir}/EULA"));
1748 my $title = "END USER LICENSE AGREEMENT (EULA)";
1749 $data =~ s/__LICENSE__/$license/;
1750 $data =~ s/__LICENSE_TITLE__/$title/;
1753 $htmlview->load_html_string($data, $url);
1755 $last_display_change = time();
1759 my ($text, $fctn) = @_;
1762 $text = "_Next" if !$text;
1763 $next->set_label ($text);
1765 $next->grab_focus ();
1768 sub create_main_window
{
1770 $window = Gtk3
::Window-
>new ();
1771 $window->set_default_size (1024, 768);
1772 $window->set_has_resize_grip(0);
1773 $window->set_decorated (0) if !$opt_testmode;
1775 my $vbox = Gtk3
::VBox-
>new (0, 0);
1777 my $logofn = "$setup->{product}-banner.png";
1778 my $image = Gtk3
::Image-
>new_from_file("${proxmox_libdir}/$logofn");
1779 $vbox->pack_start ($image, 0, 0, 0);
1781 my $hbox = Gtk3
::HBox-
>new (0, 0);
1782 $vbox->pack_start ($hbox, 1, 1, 0);
1784 # my $f1 = Gtk3::Frame->new ('test');
1785 # $f1->set_shadow_type ('none');
1786 # $hbox->pack_start ($f1, 1, 1, 0);
1788 my $sep1 = Gtk3
::HSeparator-
>new;
1789 $vbox->pack_start ($sep1, 0, 0, 0);
1791 $cmdbox = Gtk3
::HBox-
>new ();
1792 $vbox->pack_start ($cmdbox, 0, 0, 10);
1794 $next = Gtk3
::Button-
>new ('_Next');
1795 $next->signal_connect (clicked
=> sub { $last_display_change = 0; &$next_fctn (); });
1796 $cmdbox->pack_end ($next, 0, 0, 10);
1797 my $abort = Gtk3
::Button-
>new ('_Abort');
1798 $abort->set_can_focus (0);
1799 $cmdbox->pack_start ($abort, 0, 0, 10);
1800 $abort->signal_connect (clicked
=> sub { exit (-1); });
1802 my $vbox2 = Gtk3
::VBox-
>new (0, 0);
1803 $hbox->add ($vbox2);
1805 $htmlview = Gtk3
::WebKit
::WebView-
>new();
1806 my $scrolls = Gtk3
::ScrolledWindow-
>new();
1807 $scrolls->add($htmlview);
1809 my $hbox2 = Gtk3
::HBox-
>new (0, 0);
1810 $hbox2->pack_start ($scrolls, 1, 1, 0);
1812 $vbox2->pack_start ($hbox2, 1, 1, 0);
1814 my $vbox3 = Gtk3
::VBox-
>new (0, 0);
1815 $vbox2->pack_start ($vbox3, 0, 0, 0);
1817 my $sep2 = Gtk3
::HSeparator-
>new;
1818 $vbox3->pack_start ($sep2, 0, 0, 0);
1820 $inbox = Gtk3
::HBox-
>new (0, 0);
1821 $vbox3->pack_start ($inbox, 0, 0, 0);
1823 $window->add ($vbox);
1826 $window->realize ();
1830 $inbox->foreach(sub {
1832 $inbox->remove ($child);
1836 # fixme: newer GTK3 has special properties to handle numbers with Entry
1837 # only allow floating point numbers with Gtk3::Entry
1840 my ($entry, $event) = @_;
1842 return check_number
($entry, $event, 1);
1846 my ($entry, $event) = @_;
1848 return check_number
($entry, $event, 0);
1852 my ($entry, $event, $float) = @_;
1854 my $val = $event->get_keyval;
1856 if (($float && $val == ord '.') ||
1857 $val == Gtk3
::Gdk
::KEY_ISO_Left_Tab
||
1858 $val == Gtk3
::Gdk
::KEY_Shift_L
||
1859 $val == Gtk3
::Gdk
::KEY_Tab
||
1860 $val == Gtk3
::Gdk
::KEY_Left
||
1861 $val == Gtk3
::Gdk
::KEY_Right
||
1862 $val == Gtk3
::Gdk
::KEY_BackSpace
||
1863 $val == Gtk3
::Gdk
::KEY_Delete
||
1864 ($val >= ord '0' && $val <= ord '9') ||
1865 ($val >= Gtk3
::Gdk
::KEY_KP_0
&&
1866 $val <= Gtk3
::Gdk
::KEY_KP_9
)) {
1873 sub create_text_input
{
1874 my ($default, $text) = @_;
1876 my $hbox = Gtk3
::HBox-
>new (0, 0);
1878 my $label = Gtk3
::Label-
>new ($text);
1879 $label->set_size_request (150, -1);
1880 $label->set_alignment (1, 0.5);
1881 $hbox->pack_start ($label, 0, 0, 10);
1882 my $e1 = Gtk3
::Entry-
>new ();
1883 $e1->set_width_chars (30);
1884 $hbox->pack_start ($e1, 0, 0, 0);
1885 $e1->set_text ($default);
1887 return ($hbox, $e1);
1895 my $links = `ip -o l`;
1896 foreach my $l (split /\n/,$links) {
1897 my ($index, $name, $flags, $state, $mac) = $l =~ m/^(\d+):\s+(\S+):\s+<(\S+)>.*\s+state\s+(\S+)\s+.*\s+link\/ether\s
+(\S
+)\s
+/;
1898 next if !$name || $name eq 'lo';
1900 my $driver = readlink "/sys/class/net/$name/device/driver" || 'unknown';
1901 $driver =~ s!^.*/!!;
1903 $ifaces->{"$index"} = {
1911 my $addresses = `ip -o a s $name`;
1912 foreach my $a (split /\n/,$addresses) {
1913 my ($family, $ip, $prefix) = $a =~ m/^\Q$index\E:\s+\Q$name\E\s+(inet|inet6)\s+($IPRE)\/(\d+)\s+/;
1915 next if $a =~ /scope\s+link/; # ignore link local
1919 if ($family eq 'inet') {
1920 next if !$ip =~ /$IPV4RE/;
1921 next if $prefix < 8 || $prefix > 32;
1922 $mask = @$ipv4_reverse_mask[$prefix];
1924 next if !$ip =~ /$IPV6RE/;
1927 $default = $index if !$default;
1929 $ifaces->{"$index"}->{"$family"} = {
1937 my $route = `ip route
`;
1938 my ($gateway) = $route =~ m/^default\s+via\s+(\S+)\s+/m;
1940 my $resolvconf = `cat
/etc/resolv
.conf
`;
1941 my ($dnsserver) = $resolvconf =~ m/^nameserver\s+(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/m;
1942 my ($domain) = $resolvconf =~ m/^domain\s+(\S+)$/m;
1945 default => $default,
1947 gateway => $gateway,
1948 dnsserver => $dnsserver,
1953 sub display_message {
1956 my $dialog = Gtk3::MessageDialog->new ($window, 'modal',
1957 'info', 'ok', $msg);
1965 my $dialog = Gtk3::MessageDialog->new ($window, 'modal',
1966 'error', 'ok', $msg);
1971 my $ipconf_first_view = 1;
1973 sub create_ipconf_view {
1976 display_html ("ipconf.htm");
1978 my $vbox = Gtk3::VBox->new (0, 0);
1979 $inbox->pack_start ($vbox, 1, 0, 0);
1980 my $hbox = Gtk3::HBox->new (0, 0);
1981 $vbox->pack_start ($hbox, 0, 0, 10);
1982 my $vbox2 = Gtk3::VBox->new (0, 0);
1983 $hbox->add ($vbox2);
1986 ($ipbox, $ipconf_entry_addr) =
1987 create_text_input ("192.168.100.2", 'IP Address:');
1990 ($maskbox, $ipconf_entry_mask) =
1991 create_text_input ("255.255.255.0", 'Netmask:');
1993 my $device_cb = Gtk3::ComboBoxText->new();
1994 $device_cb->set_active(0);
1995 $device_cb->set_visible(1);
1997 my $get_device_desc = sub {
1999 return "$iface->{name} - $iface->{mac} ($iface->{driver})";
2002 my $device_active_map = {};
2004 my $device_change_handler = sub {
2005 my $current = shift;
2006 $ipconf->{selected} = $device_active_map->{$current->get_active()};
2007 my $iface = $ipconf->{ifaces}->{$ipconf->{selected}};
2008 $ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
2009 if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
2010 $ipconf_entry_mask->set_text($iface->{inet}->{mask} || $iface->{inet6}->{mask})
2011 if $iface->{inet}->{mask} || $iface->{inet6}->{mask};
2015 foreach my $index (sort keys %{$ipconf->{ifaces}}) {
2016 $device_cb->append_text(&$get_device_desc($ipconf->{ifaces}->{$index}));
2017 $device_active_map->{$i} = $index;
2018 if ($ipconf_first_view && $index == $ipconf->{default}) {
2019 $device_cb->set_active($i);
2020 &$device_change_handler($device_cb);
2021 $ipconf_first_view = 0;
2023 $device_cb->signal_connect ('changed' => $device_change_handler);
2027 $device_cb->set_active(0)
2028 if !($ipconf->{selected});
2030 my $devicebox = Gtk3::HBox->new (0, 0);
2031 my $label = Gtk3::Label->new ("Management Interface:");
2032 $label->set_size_request (150, -1);
2033 $label->set_alignment (1, 0.5);
2034 $devicebox->pack_start ($label, 0, 0, 10);
2035 $devicebox->pack_start ($device_cb, 0, 0, 0);
2037 $vbox2->pack_start ($devicebox, 0, 0, 2);
2039 my $hn = $ipconf->{domain} ?
2040 "$setup->{product}.$ipconf->{domain}" : "$setup->{product}.example.invalid";
2042 my ($hostbox, $hostentry) =
2043 create_text_input ($hn, 'Hostname (FQDN):');
2044 $vbox2->pack_start ($hostbox, 0, 0, 2);
2046 $vbox2->pack_start ($ipbox, 0, 0, 2);
2048 $vbox2->pack_start ($maskbox, 0, 0, 2);
2050 $gateway = $ipconf->{gateway} || '192.168.100.1';
2053 ($gwbox, $ipconf_entry_gw) =
2054 create_text_input ($gateway, 'Gateway:');
2056 $vbox2->pack_start ($gwbox, 0, 0, 2);
2058 $dnsserver = $ipconf->{dnsserver} || $gateway;
2061 ($dnsbox, $ipconf_entry_dns) =
2062 create_text_input ($dnsserver, 'DNS Server:');
2064 $vbox2->pack_start ($dnsbox, 0, 0, 0);
2067 set_next (undef, sub {
2071 my $text = $hostentry->get_text();
2076 my $namere = "([a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?)";
2078 # Debian does not support purely numeric hostnames
2079 if ($text && $text =~ /^[0-9]+(?:\.|$)/) {
2080 display_message("Purely numeric hostnames are not allowed.");
2081 $hostentry->grab_focus();
2085 if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.example.invalid$/ &&
2086 $text =~ m/^([^\.]+)\.(\S+)$/) {
2090 display_message ("Hostname does not look like a fully qualified domain name.");
2091 $hostentry->grab_focus();
2097 $text = $ipconf_entry_addr->get_text();
2100 if ($text =~ m!^($IPV4RE)$!) {
2103 } elsif ($text =~ m!^($IPV6RE)$!) {
2107 display_message ("IP address is not valid.");
2108 $ipconf_entry_addr->grab_focus();
2112 $text = $ipconf_entry_mask->get_text();
2115 if (($ipversion == 6) && ($text =~ m/^(\d+)$/) && ($1 >= 8) && ($1 <= 126)) {
2117 } elsif (($ipversion == 4) && defined($ipv4_mask_hash->{$text})) {
2120 display_message ("Netmask is not valid.");
2121 $ipconf_entry_mask->grab_focus();
2125 $text = $ipconf_entry_gw->get_text();
2128 if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
2130 } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
2133 display_message ("Gateway is not valid.");
2134 $ipconf_entry_gw->grab_focus();
2138 $text = $ipconf_entry_dns->get_text();
2141 if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
2143 } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
2146 display_message ("DNS server is not valid.");
2147 $ipconf_entry_dns->grab_focus();
2151 #print "TEST $ipaddress $netmask $gateway $dnsserver\n";
2153 create_extract_view ();
2156 $hostentry->grab_focus();
2159 sub get_device_desc {
2160 my ($devname, $size, $model) = @_;
2162 if ($size && ($size > 0)) {
2163 $size = int($size/2048); # size in MB, from 512B "sectors"
2165 my $text = "$devname (";
2166 if ($size >= 1024) {
2167 $size = int($size/1024); # size in GB
2168 $text .= "${size}GB";
2170 $text .= "${size}MB";
2173 $text .= ", $model" if $model;
2182 my ($cb, $kmap) = @_;
2187 my $kmaphash = $cmap->{kmaphash};
2188 foreach my $layout (sort keys %$kmaphash) {
2189 $def = $i if $kmaphash->{$layout} eq 'en-us';
2190 $ind = $i if $kmap && $kmaphash->{$layout} eq $kmap;
2194 $cb->set_active ($ind || $def || 0);
2198 sub update_zonelist {
2199 my ($box, $cc) = @_;
2201 my $cczones = $cmap->{cczones};
2202 my $zones = $cmap->{zones};
2206 $sel = $lastzonecb->get_active_text();
2207 $box->remove ($lastzonecb);
2209 $sel = $timezone; # used once to select default
2212 my $cb = $lastzonecb = Gtk3::ComboBoxText->new();
2213 $cb->set_size_request (200, -1);
2215 $cb->signal_connect ('changed' => sub {
2216 $timezone = $cb->get_active_text();
2220 if ($cc && defined ($cczones->{$cc})) {
2221 @za = keys %{$cczones->{$cc}};
2227 foreach my $zone (sort @za) {
2228 $ind = $i if $sel && $zone eq $sel;
2229 $cb->append_text ($zone);
2233 $cb->set_active ($ind || 0);
2236 $box->pack_start ($cb, 0, 0, 0);
2239 sub create_password_view {
2243 my $vbox2 = Gtk3::VBox->new (0, 0);
2244 $inbox->pack_start ($vbox2, 1, 0, 0);
2245 my $vbox = Gtk3::VBox->new (0, 0);
2246 $vbox2->pack_start ($vbox, 0, 0, 10);
2248 my $hbox1 = Gtk3::HBox->new (0, 0);
2249 my $label = Gtk3::Label->new ("Password");
2250 $label->set_size_request (150, -1);
2251 $label->set_alignment (1, 0.5);
2252 $hbox1->pack_start ($label, 0, 0, 10);
2253 my $pwe1 = Gtk3::Entry->new ();
2254 $pwe1->set_visibility (0);
2255 $pwe1->set_size_request (200, -1);
2256 $hbox1->pack_start ($pwe1, 0, 0, 0);
2258 my $hbox2 = Gtk3::HBox->new (0, 0);
2259 $label = Gtk3::Label->new ("Confirm");
2260 $label->set_size_request (150, -1);
2261 $label->set_alignment (1, 0.5);
2262 $hbox2->pack_start ($label, 0, 0, 10);
2263 my $pwe2 = Gtk3::Entry->new ();
2264 $pwe2->set_visibility (0);
2265 $pwe2->set_size_request (200, -1);
2266 $hbox2->pack_start ($pwe2, 0, 0, 0);
2268 my $hbox3 = Gtk3::HBox->new (0, 0);
2269 $label = Gtk3::Label->new ("E-Mail");
2270 $label->set_size_request (150, -1);
2271 $label->set_alignment (1, 0.5);
2272 $hbox3->pack_start ($label, 0, 0, 10);
2273 my $eme = Gtk3::Entry->new ();
2274 $eme->set_size_request (200, -1);
2275 $eme->set_text('mail@example.invalid');
2276 $hbox3->pack_start ($eme, 0, 0, 0);
2279 $vbox->pack_start ($hbox1, 0, 0, 5);
2280 $vbox->pack_start ($hbox2, 0, 0, 5);
2281 $vbox->pack_start ($hbox3, 0, 0, 15);
2285 display_html ("passwd.htm");
2287 set_next (undef, sub {
2289 my $t1 = $pwe1->get_text;
2290 my $t2 = $pwe2->get_text;
2292 if (length ($t1) < 5) {
2293 display_message ("Password is too short.");
2294 $pwe1->grab_focus();
2299 display_message ("Password does not match.");
2300 $pwe1->grab_focus();
2304 my $t3 = $eme->get_text;
2305 if ($t3 !~ m/^\S+\@\S+\.\S+$/) {
2306 display_message ("E-Mail does not look like a valid address" .
2307 " (user\@domain.tld)");
2312 if ($t3 eq 'mail@example.invalid') {
2313 display_message ("Please enter a valid E-Mail address");
2321 create_ipconf_view();
2324 $pwe1->grab_focus();
2328 sub create_country_view {
2332 my $countryhash = $cmap->{countryhash};
2333 my $ctr = $cmap->{country};
2335 my $vbox2 = Gtk3::VBox->new (0, 0);
2336 $inbox->pack_start ($vbox2, 1, 0, 0);
2337 my $vbox = Gtk3::VBox->new (0, 0);
2338 $vbox2->pack_start ($vbox, 0, 0, 10);
2340 my $w = Gtk3::Entry->new ();
2341 $w->set_size_request (200, -1);
2343 my $c = Gtk3::EntryCompletion->new ();
2344 $c->set_text_column (0);
2345 $c->set_minimum_key_length(0);
2346 $c->set_popup_set_width (1);
2347 $c->set_inline_completion (1);
2349 my $hbox2 = Gtk3::HBox->new (0, 0);
2350 my $label = Gtk3::Label->new ("Time zone");
2351 $label->set_size_request (150, -1);
2352 $label->set_alignment (1, 0.5);
2353 $hbox2->pack_start ($label, 0, 0, 10);
2354 update_zonelist ($hbox2);
2356 my $hbox3 = Gtk3::HBox->new (0, 0);
2357 $label = Gtk3::Label->new ("Keyboard Layout");
2358 $label->set_size_request (150, -1);
2359 $label->set_alignment (1, 0.5);
2360 $hbox3->pack_start ($label, 0, 0, 10);
2362 my $kmapcb = Gtk3::ComboBoxText->new();
2363 $kmapcb->set_size_request (200, -1);
2364 foreach my $layout (sort keys %{$cmap->{kmaphash}}) {
2365 $kmapcb->append_text ($layout);
2368 update_layout ($kmapcb);
2369 $hbox3->pack_start ($kmapcb, 0, 0, 0);
2371 $kmapcb->signal_connect ('changed' => sub {
2372 my $sel = $kmapcb->get_active_text();
2373 if (my $kmap = $cmap->{kmaphash}->{$sel}) {
2374 my $xkmap = $cmap->{kmap}->{$kmap}->{x11};
2375 my $xvar = $cmap->{kmap}->{$kmap}->{x11var};
2376 syscmd ("setxkbmap $xkmap $xvar") if !$opt_testmode;
2381 $w->signal_connect ('changed' => sub {
2382 my ($entry, $event) = @_;
2383 my $text = $entry->get_text;
2385 if (my $cc = $countryhash->{lc($text)}) {
2386 update_zonelist ($hbox2, $cc);
2387 my $kmap = $ctr->{$cc}->{kmap} || 'en-us';
2388 update_layout ($kmapcb, $kmap);
2392 $w->signal_connect (key_press_event => sub {
2393 my ($entry, $event) = @_;
2394 my $text = $entry->get_text;
2396 my $val = $event->get_keyval;
2398 if ($val == Gtk3::Gdk::KEY_Tab) {
2399 my $cc = $countryhash->{lc($text)};
2406 $compl = $ctr->{$cc}->{name};
2408 foreach my $cc (keys %$ctr) {
2409 my $ct = $ctr->{$cc}->{name};
2410 if ($ct =~ m/^\Q$text\E.*$/i) {
2419 $entry->set_text($compl);
2424 print chr(7); # beep ?
2429 my $buf = $w->get_buffer();
2430 $buf->insert_text(-1, '', -1); # popup selection
2438 my $ls = Gtk3::ListStore->new('Glib::String');
2439 foreach my $cc (sort {$ctr->{$a}->{name} cmp $ctr->{$b}->{name} } keys %$ctr) {
2440 my $iter = $ls->append();
2441 $ls->set ($iter, 0, $ctr->{$cc}->{name});
2443 $c->set_model ($ls);
2445 $w->set_completion ($c);
2447 my $hbox = Gtk3::HBox->new (0, 0);
2449 $label = Gtk3::Label->new ("Country");
2450 $label->set_alignment (1, 0.5);
2451 $label->set_size_request (150, -1);
2452 $hbox->pack_start ($label, 0, 0, 10);
2453 $hbox->pack_start ($w, 0, 0, 0);
2455 $vbox->pack_start ($hbox, 0, 0, 5);
2456 $vbox->pack_start ($hbox2, 0, 0, 5);
2457 $vbox->pack_start ($hbox3, 0, 0, 5);
2459 if ($country && $ctr->{$country}) {
2460 $w->set_text ($ctr->{$country}->{name});
2465 display_html ("country.htm");
2466 set_next (undef, sub {
2468 my $text = $w->get_text;
2470 if (my $cc = $countryhash->{lc($text)}) {
2472 create_password_view();
2475 display_message ("Please select a country first.");
2483 my $target_hd_combo;
2484 my $target_hd_label;
2486 my $hdopion_first_setup = 1;
2488 my $create_basic_grid = sub {
2489 my $grid = Gtk3::Grid->new();
2490 $grid->set_visible(1);
2491 $grid->set_column_spacing(10);
2492 $grid->set_row_spacing(10);
2493 $grid->set_hexpand(1);
2495 $grid->set_margin_start(5);
2496 $grid->set_margin_end(5);
2497 $grid->set_margin_top(5);
2498 $grid->set_margin_bottom(5);
2503 my $create_label_widget_grid = sub {
2504 my ($labeled_widgets) = @_;
2506 my $grid = &$create_basic_grid();
2509 for (my $i = 0; $i < @$labeled_widgets; $i += 2) {
2510 my $widget = @$labeled_widgets[$i+1];
2511 my $label = Gtk3::Label->new(@$labeled_widgets[$i]);
2512 $label->set_visible(1);
2513 $label->set_alignment (1, 0.5);
2514 $grid->attach($label, 0, $row, 1, 1);
2515 $widget->set_visible(1);
2516 $grid->attach($widget, 1, $row, 1, 1);
2523 my $create_raid_disk_grid = sub {
2524 my $disk_labeled_widgets = [];
2525 for (my $i = 0; $i < @$hds; $i++) {
2526 my $disk_selector = Gtk3::ComboBoxText->new();
2527 $disk_selector->append_text("-- do not use --");
2528 $disk_selector->set_active(0);
2529 $disk_selector->set_visible(1);
2530 foreach my $hd (@$hds) {
2531 my ($disk, $devname, $size, $model) = @$hd;
2532 $disk_selector->append_text(get_device_desc ($devname, $size, $model));
2533 $disk_selector->{pve_disk_id} = $i;
2534 $disk_selector->signal_connect (changed => sub {
2536 my $diskid = $w->{pve_disk_id};
2537 my $a = $w->get_active - 1;
2538 $config_options->{"disksel${diskid}"} = ($a >= 0) ? $hds->[$a] : undef;
2542 if ($hdopion_first_setup) {
2543 $disk_selector->set_active ($i+1) if $hds->[$i];
2546 if (my $cur_hd = $config_options->{"disksel$i"}) {
2547 foreach my $hd (@$hds) {
2548 if (@$hd[1] eq @$cur_hd[1]) {
2549 $disk_selector->set_active($hdind+1);
2557 push @$disk_labeled_widgets, "Harddisk $i", $disk_selector;
2560 my $scrolled_window = Gtk3::ScrolledWindow->new();
2561 $scrolled_window->set_hexpand(1);
2562 $scrolled_window->set_propagate_natural_height(1) if @$hds > 4;
2563 $scrolled_window->add(&$create_label_widget_grid($disk_labeled_widgets));
2564 $scrolled_window->set_policy('never', 'automatic');
2566 return $scrolled_window;
2567 # &$create_label_widget_grid($disk_labeled_widgets)
2570 my $create_raid_advanced_grid = sub {
2571 my $labeled_widgets = [];
2572 my $spinbutton_ashift = Gtk3::SpinButton->new_with_range(9,13,1);
2573 $spinbutton_ashift->set_tooltip_text("zpool ashift property (pool sector size, default 2^12)");
2574 $spinbutton_ashift->signal_connect ("value-changed" => sub {
2576 $config_options->{ashift} = $w->get_value_as_int();
2578 $config_options->{ashift} = 12 if ! defined($config_options->{ashift});
2579 $spinbutton_ashift->set_value($config_options->{ashift});
2580 push @$labeled_widgets, "ashift";
2581 push @$labeled_widgets, $spinbutton_ashift;
2583 my $combo_compress = Gtk3::ComboBoxText->new();
2584 $combo_compress->set_tooltip_text("zfs compression algorithm for rpool dataset");
2585 # note: gzip / lze not allowed for bootfs vdevs
2586 my $comp_opts = ["on","off","lzjb","lz4"];
2587 foreach my $opt (@$comp_opts) {
2588 $combo_compress->append($opt, $opt);
2590 $config_options->{compress} = "on" if !defined($config_options->{compress});
2591 $combo_compress->set_active_id($config_options->{compress});
2592 $combo_compress->signal_connect (changed => sub {
2594 $config_options->{compress} = $w->get_active_text();
2596 push @$labeled_widgets, "compress";
2597 push @$labeled_widgets, $combo_compress;
2599 my $combo_checksum = Gtk3::ComboBoxText->new();
2600 $combo_checksum->set_tooltip_text("zfs checksum algorithm for rpool dataset");
2601 my $csum_opts = ["on", "off","fletcher2", "fletcher4", "sha256"];
2602 foreach my $opt (@$csum_opts) {
2603 $combo_checksum->append($opt, $opt);
2605 $config_options->{checksum} = "on" if !($config_options->{checksum});
2606 $combo_checksum->set_active_id($config_options->{checksum});
2607 $combo_checksum->signal_connect (changed => sub {
2609 $config_options->{checksum} = $w->get_active_text();
2611 push @$labeled_widgets, "checksum";
2612 push @$labeled_widgets, $combo_checksum;
2614 my $spinbutton_copies = Gtk3::SpinButton->new_with_range(1,3,1);
2615 $spinbutton_copies->set_tooltip_text("zfs copies property for rpool dataset (in addition to RAID redundancy!)");
2616 $spinbutton_copies->signal_connect ("value-changed" => sub {
2618 $config_options->{copies} = $w->get_value_as_int();
2620 $config_options->{copies} = 1 if !defined($config_options->{copies});
2621 $spinbutton_copies->set_value($config_options->{copies});
2622 push @$labeled_widgets, "copies", $spinbutton_copies;
2624 return &$create_label_widget_grid($labeled_widgets);;
2627 sub create_hdoption_view {
2629 my $dialog = Gtk3::Dialog->new();
2631 $dialog->set_title("Harddisk options");
2633 $dialog->add_button("_OK", 1);
2635 my $contarea = $dialog->get_content_area();
2637 my $hbox2 = Gtk3::Box->new('horizontal', 0);
2638 $contarea->pack_start($hbox2, 1, 1, 10);
2640 my $grid = Gtk3::Grid->new();
2641 $grid->set_column_spacing(10);
2642 $grid->set_row_spacing(10);
2644 $hbox2->pack_start($grid, 1, 0, 10);
2650 my $label0 = Gtk3::Label->new ("Filesystem");
2651 $label0->set_alignment (1, 0.5);
2652 $grid->attach($label0, 0, $row, 1, 1);
2654 my $fstypecb = Gtk3::ComboBoxText->new();
2656 my $fstype = ['ext3', 'ext4', 'xfs',
2657 'zfs (RAID0)', 'zfs (RAID1)',
2658 'zfs (RAID10)', 'zfs (RAIDZ-1)',
2659 'zfs (RAIDZ-2)', 'zfs (RAIDZ-3)'];
2661 push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
2662 if $setup->{enable_btrfs};
2665 foreach my $tmp (@$fstype) {
2666 $fstypecb->append_text($tmp);
2667 $fstypecb->set_active ($tcount)
2668 if $config_options->{filesys} eq $tmp;
2672 $grid->attach($fstypecb, 1, $row, 1, 1);
2678 my $sep = Gtk3::HSeparator->new();
2679 $sep->set_visible(1);
2680 $grid->attach($sep, 0, $row, 2, 1);
2683 my $hdsize_labeled_widgets = [];
2687 if ( -b $target_hd) {
2688 $hdsize = int(hd_size ($target_hd) / (1024*1024.0)); # size in GB
2689 } elsif ($target_hd) {
2690 $hdsize = int((-s $target_hd) / (1024*1024*1024.0));
2693 my $hdsize_size_adj = Gtk3::Adjustment->new($config_options->{hdsize} || $hdsize, 0, $hdsize+1, 1, 1, 1);
2694 my $spinbutton_hdsize = Gtk3::SpinButton->new($hdsize_size_adj, 1, 1);
2695 $spinbutton_hdsize->set_tooltip_text("only use specified size (GB) of the harddisk (rest left unpartitioned)");
2696 push @$hdsize_labeled_widgets, "hdsize", $spinbutton_hdsize;
2698 my $entry_swapsize = Gtk3::Entry->new();
2699 $entry_swapsize->set_tooltip_text("maximum SWAP size (GB)");
2700 $entry_swapsize->signal_connect (key_press_event => \&check_float);
2701 $entry_swapsize->set_text($config_options->{swapsize}) if defined($config_options->{swapsize});
2702 push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
2704 my $entry_maxroot = Gtk3::Entry->new();
2705 if ($setup->{product} eq 'pve') {
2706 $entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
2707 $entry_maxroot->signal_connect (key_press_event => \&check_float);
2708 $entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
2709 push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
2712 my $entry_minfree = Gtk3::Entry->new();
2713 $entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
2714 $entry_minfree->signal_connect (key_press_event => \&check_float);
2715 $entry_minfree->set_text($config_options->{minfree}) if defined($config_options->{minfree});
2716 push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
2719 if ($setup->{product} eq 'pve') {
2720 $entry_maxvz = Gtk3::Entry->new();
2721 $entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
2722 $entry_maxvz->signal_connect (key_press_event => \&check_float);
2723 $entry_maxvz->set_text($config_options->{maxvz}) if defined($config_options->{maxvz});
2724 push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
2727 my $options_stack = Gtk3::Stack->new();
2728 $options_stack->set_visible(1);
2729 $options_stack->set_hexpand(1);
2730 $options_stack->set_vexpand(1);
2731 $options_stack->add_titled(&$create_raid_disk_grid(), "raiddisk", "Disk Setup");
2732 $options_stack->add_titled(&$create_label_widget_grid($hdsize_labeled_widgets), "hdsize", "Size Options");
2733 $options_stack->add_titled(&$create_raid_advanced_grid("zfs"), "raidzfsadvanced", "Advanced Options");
2734 $options_stack->set_visible_child_name("raiddisk");
2735 my $options_stack_switcher = Gtk3::StackSwitcher->new();
2736 $options_stack_switcher->set_halign('center');
2737 $options_stack_switcher->set_stack($options_stack);
2738 $grid->attach($options_stack_switcher, 0, $row, 2, 1);
2740 $grid->attach($options_stack, 0, $row, 2, 1);
2743 $hdopion_first_setup = 0;
2745 my $switch_view = sub {
2746 my $raid = $config_options->{filesys} =~ m/zfs|btrfs/;
2747 my $enable_zfs_opts = $config_options->{filesys} =~ m/zfs/;
2749 $target_hd_combo->set_visible(!$raid);
2750 $options_stack->get_child_by_name("hdsize")->set_visible(!$raid);
2751 $options_stack->get_child_by_name("raiddisk")->set_visible($raid);
2752 $options_stack_switcher->set_visible($enable_zfs_opts);
2753 $options_stack->get_child_by_name("raidzfsadvanced")->set_visible($enable_zfs_opts);
2755 $target_hd_label->set_text("Target: $config_options->{filesys} ");
2756 $options_stack->set_visible_child_name("raiddisk");
2758 $target_hd_label->set_text("Target Harddisk: ");
2760 my (undef, $pref_width) = $dialog->get_preferred_width();
2761 my (undef, $pref_height) = $dialog->get_preferred_height();
2762 $pref_height = 750 if $pref_height > 750;
2763 $dialog->resize($pref_width, $pref_height);
2768 $fstypecb->signal_connect (changed => sub {
2769 $config_options->{filesys} = $fstypecb->get_active_text();
2777 my $get_float = sub {
2780 my $text = $entry->get_text();
2781 return undef if !defined($text);
2786 return undef if $text !~ m/^\d+(\.\d+)?$/;
2793 if (($tmp = &$get_float($spinbutton_hdsize)) && ($tmp != $hdsize)) {
2794 $config_options->{hdsize} = $tmp;
2796 delete $config_options->{hdsize};
2799 if (defined($tmp = &$get_float($entry_swapsize))) {
2800 $config_options->{swapsize} = $tmp;
2802 delete $config_options->{swapsize};
2805 if (defined($tmp = &$get_float($entry_maxroot))) {
2806 $config_options->{maxroot} = $tmp;
2808 delete $config_options->{maxroot};
2811 if (defined($tmp = &$get_float($entry_minfree))) {
2812 $config_options->{minfree} = $tmp;
2814 delete $config_options->{minfree};
2817 if ($entry_maxvz && defined($tmp = &$get_float($entry_maxvz))) {
2818 $config_options->{maxvz} = $tmp;
2820 delete $config_options->{maxvz};
2826 my $get_raid_devlist = sub {
2828 my $dev_name_hash = {};
2831 for (my $i = 0; $i < @$hds; $i++) {
2832 if (my $hd = $config_options->{"disksel$i"}) {
2833 my ($disk, $devname, $size, $model) = @$hd;
2834 die "device '$devname' is used more than once\n"
2835 if $dev_name_hash->{$devname};
2836 $dev_name_hash->{$devname} = $hd;
2837 push @$devlist, $hd;
2844 sub zfs_mirror_size_check {
2845 my ($expected, $actual) = @_;
2847 die "mirrored disks must have same size\n"
2848 if abs($expected - $actual) > $expected / 10;
2851 sub get_zfs_raid_setup {
2853 my $filesys = $config_options->{filesys};
2855 my $devlist = &$get_raid_devlist();
2857 my $diskcount = scalar(@$devlist);
2858 die "$filesys needs at least one device\n" if $diskcount < 1;
2860 my $bootdevlist = [];
2863 if ($filesys eq 'zfs (RAID0)') {
2864 push @$bootdevlist, @$devlist[0];
2865 foreach my $hd (@$devlist) {
2868 } elsif ($filesys eq 'zfs (RAID1)') {
2869 die "zfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
2871 my $hd = @$devlist[0];
2872 my $expected_size = @$hd[2]; # all disks need approximately same size
2873 foreach $hd (@$devlist) {
2874 zfs_mirror_size_check($expected_size, @$hd[2]);
2876 push @$bootdevlist, $hd;
2878 } elsif ($filesys eq 'zfs (RAID10)') {
2879 die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
2880 die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
2882 push @$bootdevlist, @$devlist[0], @$devlist[1];
2884 for (my $i = 0; $i < $diskcount; $i+=2) {
2885 my $hd1 = @$devlist[$i];
2886 my $hd2 = @$devlist[$i+1];
2887 zfs_mirror_size_check(@$hd1[2], @$hd2[2]); # pairs need approximately same size
2888 $cmd .= ' mirror ' . @$hd1[1] . ' ' . @$hd2[1];
2891 } elsif ($filesys =~ m/^zfs \(RAIDZ-([123])\)$/) {
2893 my $mindisks = 2 + $level;
2894 die "zfs (RAIDZ-$level) needs at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
2895 my $hd = @$devlist[0];
2896 my $expected_size = @$hd[2]; # all disks need approximately same size
2897 $cmd .= " raidz$level";
2898 foreach $hd (@$devlist) {
2899 zfs_mirror_size_check($expected_size, @$hd[2]);
2901 push @$bootdevlist, $hd;
2904 die "unknown zfs mode '$filesys'\n";
2907 return ($devlist, $bootdevlist, $cmd);
2910 sub get_btrfs_raid_setup {
2912 my $filesys = $config_options->{filesys};
2914 my $devlist = &$get_raid_devlist();
2916 my $diskcount = scalar(@$devlist);
2917 die "$filesys needs at least one device\n" if $diskcount < 1;
2921 if ($diskcount == 1) {
2924 if ($filesys eq 'btrfs (RAID0)') {
2926 } elsif ($filesys eq 'btrfs (RAID1)') {
2927 die "btrfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
2929 } elsif ($filesys eq 'btrfs (RAID10)') {
2930 die "btrfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
2933 die "unknown btrfs mode '$filesys'\n";
2937 return ($devlist, $mode);
2940 sub create_hdsel_view {
2944 my $vbox = Gtk3::VBox->new (0, 0);
2945 $inbox->pack_start ($vbox, 1, 0, 0);
2946 my $hbox = Gtk3::HBox->new (0, 0);
2947 $vbox->pack_start ($hbox, 0, 0, 10);
2949 my ($disk, $devname, $size, $model) = @{@$hds[0]};
2950 $target_hd = $devname;
2952 $target_hd_label = Gtk3::Label->new ("Target Harddisk: ");
2953 $hbox->pack_start ($target_hd_label, 0, 0, 0);
2955 $target_hd_combo = Gtk3::ComboBoxText->new();
2957 foreach my $hd (@$hds) {
2958 ($disk, $devname, $size, $model) = @$hd;
2959 $target_hd_combo->append_text (get_device_desc ($devname, $size, $model));
2962 $target_hd_combo->set_active (0);
2963 $target_hd_combo->signal_connect (changed => sub {
2964 $a = shift->get_active;
2965 my ($disk, $devname) = @{@$hds[$a]};
2966 $target_hd = $devname;
2969 $hbox->pack_start ($target_hd_combo, 0, 0, 10);
2971 my $options = Gtk3::Button->new ('_Options');
2972 $options->signal_connect (clicked => \&create_hdoption_view);
2973 $hbox->pack_start ($options, 0, 0, 0);
2978 display_html ("page1.htm");
2980 set_next (undef, sub {
2982 if ($config_options->{filesys} =~ m/zfs/) {
2983 eval { get_zfs_raid_setup(); };
2985 display_message ("Warning: $err\n" .
2986 "Please fix ZFS setup first.");
2988 create_country_view();
2990 } elsif ($config_options->{filesys} =~ m/btrfs/) {
2991 eval { get_btrfs_raid_setup(); };
2993 display_message ("Warning: $err\n" .
2994 "Please fix BTRFS setup first.");
2996 create_country_view();
2999 create_country_view();
3004 sub create_extract_view {
3010 $next->set_sensitive (0);
3012 my $vbox = Gtk3::VBox->new (0, 0);
3013 $inbox->pack_start ($vbox, 1, 0, 0);
3014 my $hbox = Gtk3::HBox->new (0, 0);
3015 $vbox->pack_start ($hbox, 0, 0, 10);
3017 my $vbox2 = Gtk3::VBox->new (0, 0);
3018 $hbox->pack_start ($vbox2, 0, 0, 0);
3020 $progress_status = Gtk3::Label->new ('');
3021 $vbox2->pack_start ($progress_status, 1, 1, 0);
3023 $progress = Gtk3::ProgressBar->new;
3024 $progress->set_show_text(1);
3025 $progress->set_size_request (600, -1);
3027 $vbox2->pack_start ($progress, 0, 0, 0);
3031 my $tdir = $opt_testmode ? "target" : "/target";
3033 my $base = "${proxmox_cddir}/$setup->{product}-base.squashfs";
3035 eval { extract_data ($base, $tdir); };
3038 $next->set_sensitive (1);
3040 set_next ("_Reboot", sub { exit (0); } );
3043 display_html ("fail.htm");
3044 display_error ($err);
3047 display_html ("success.htm");
3051 sub create_intro_view {
3055 if ($setup->{product} eq 'pve') {
3057 my $cpuinfo = file_get_contents('/proc/cpuinfo');
3058 if ($cpuinfo && !($cpuinfo =~ /^flags\s*:.*(vmx|svm)/m)) {
3059 display_error("No support for KVM virtualisation detected.\n\n" .
3060 "Check BIOS settings for Intel VT / AMD-V / SVM.")
3065 display_html ("license.htm");
3067 set_next ("I a_gree", \&create_hdsel_view);
3070 $ipconf = get_ip_config ();
3072 $country = detect_country() if $ipconf->{default} || $opt_testmode;
3074 # read country, kmap and timezone infos
3075 $cmap = read_cmap ();
3077 if (!defined($cmap->{country}->{$country})) {
3078 print $logfd "ignoring detected country '$country', invalid or unknown\n";
3082 create_main_window ();
3084 my $initial_error = 0;
3086 if (!defined ($hds) || (scalar (@$hds) <= 0)) {
3087 print "no hardisks found\n";
3089 display_html ("nohds.htm");
3090 set_next ("Reboot", sub { exit (0); } );
3092 foreach my $hd (@$hds) {
3093 my ($disk, $devname) = @$hd;
3094 next if $devname =~ m|^/dev/md\d+$|;
3095 print "found Disk$disk N:$devname\n";
3099 if (!$initial_error && (scalar keys %{ $ipconf->{ifaces} } == 0)) {
3100 print "no network interfaces found\n";
3102 display_html ("nonics.htm");
3103 set_next ("Reboot", sub { exit (0); } );
3106 create_intro_view () if !$initial_error;