3 $ENV{DEBIAN_FRONTEND
} = 'noninteractive';
18 use String
::ShellQuote
;
23 use ProxmoxInstallerSetup
;
25 my $setup = ProxmoxInstallerSetup
::setup
();
29 if (!$ENV{G_SLICE
} || $ENV{G_SLICE
} ne "always-malloc") {
30 die "do not use slice allocator (run with 'G_SLICE=always-malloc ./proxinstall ...')\n";
33 if (!GetOptions
('testmode=s' => \
$opt_testmode)) {
38 my $zfstestpool = "test_rpool";
39 my $zfspoolname = $opt_testmode ?
$zfstestpool : 'rpool';
40 my $zfsrootvolname = "$setup->{product}-1";
42 my $storage_cfg_zfs = <<__EOD__;
45 content iso,vztmpl,backup
48 pool $zfspoolname/data
50 content images,rootdir
53 my $storage_cfg_btrfs = <<__EOD__;
56 content iso,vztmpl,backup
60 path /var/lib/pve/local-btrfs
61 content iso,vztmpl,backup,images,rootdir
64 my $storage_cfg_lvmthin = <<__EOD__;
67 content iso,vztmpl,backup
72 content rootdir,images
76 sub file_read_firstline
{
79 my $fh = IO
::File-
>new ($filename, "r");
87 my $logfd = IO
::File-
>new (">/tmp/install.log");
89 my $proxmox_libdir = $opt_testmode ?
90 Cwd
::cwd
() . "/testdir/var/lib/pve-installer" : "/var/lib/pve-installer";
91 my $proxmox_cddir = $opt_testmode ?
"../pve-cd-builder/tmp/data-gz/" : "/cdrom";
92 my $proxmox_pkgdir = "${proxmox_cddir}/proxmox/packages/";
94 my $grub_plattform = "pc"; # pc, efi-amd64 or efi-ia32
96 $grub_plattform = "efi-amd64" if -d
"/sys/firmware/efi";
98 my $IPV4OCTET = "(?:25[0-5]|(?:2[0-4]|1[0-9]|[1-9])?[0-9])";
99 my $IPV4RE = "(?:(?:$IPV4OCTET\\.){3}$IPV4OCTET)";
100 my $IPV6H16 = "(?:[0-9a-fA-F]{1,4})";
101 my $IPV6LS32 = "(?:(?:$IPV4RE|$IPV6H16:$IPV6H16))";
104 "(?:(?:" . "(?:$IPV6H16:){6})$IPV6LS32)|" .
105 "(?:(?:" . "::(?:$IPV6H16:){5})$IPV6LS32)|" .
106 "(?:(?:(?:" . "$IPV6H16)?::(?:$IPV6H16:){4})$IPV6LS32)|" .
107 "(?:(?:(?:(?:$IPV6H16:){0,1}$IPV6H16)?::(?:$IPV6H16:){3})$IPV6LS32)|" .
108 "(?:(?:(?:(?:$IPV6H16:){0,2}$IPV6H16)?::(?:$IPV6H16:){2})$IPV6LS32)|" .
109 "(?:(?:(?:(?:$IPV6H16:){0,3}$IPV6H16)?::(?:$IPV6H16:){1})$IPV6LS32)|" .
110 "(?:(?:(?:(?:$IPV6H16:){0,4}$IPV6H16)?::" . ")$IPV6LS32)|" .
111 "(?:(?:(?:(?:$IPV6H16:){0,5}$IPV6H16)?::" . ")$IPV6H16)|" .
112 "(?:(?:(?:(?:$IPV6H16:){0,6}$IPV6H16)?::" . ")))";
114 my $IPRE = "(?:$IPV4RE|$IPV6RE)";
117 my $ipv4_mask_hash = {
134 '255.255.128.0' => 17,
135 '255.255.192.0' => 18,
136 '255.255.224.0' => 19,
137 '255.255.240.0' => 20,
138 '255.255.248.0' => 21,
139 '255.255.252.0' => 22,
140 '255.255.254.0' => 23,
141 '255.255.255.0' => 24,
142 '255.255.255.128' => 25,
143 '255.255.255.192' => 26,
144 '255.255.255.224' => 27,
145 '255.255.255.240' => 28,
146 '255.255.255.248' => 29,
147 '255.255.255.252' => 30,
148 '255.255.255.254' => 31,
149 '255.255.255.255' => 32
152 my $ipv4_reverse_mask = [
188 my ($window, $cmdbox, $inbox, $htmlview);
189 my ($next, $next_fctn, $target_hd);
190 my ($progress, $progress_status);
191 my ($ipversion, $ipaddress, $ipconf_entry_addr);
192 my ($netmask, $ipconf_entry_mask);
193 my ($gateway, $ipconf_entry_gw);
194 my ($dnsserver, $ipconf_entry_dns);
195 my $hostname = 'proxmox';
196 my $domain = 'domain.tld';
197 my $cmdline = file_read_firstline
("/proc/cmdline");
200 my $timezone = 'Europe/Vienna';
203 my $keymap = 'en-us';
206 # parse command line args
208 my $config_options = {};
210 if ($cmdline =~ m/\s(ext3|ext4|xfs)(\s.*)?$/) {
211 $config_options->{filesys
} = $1;
213 $config_options->{filesys
} = 'ext4';
216 if ($cmdline =~ m/hdsize=(\d+(\.\d+)?)[\s\n]/i) {
217 $config_options->{hdsize
} = $1;
220 if ($cmdline =~ m/swapsize=(\d+(\.\d+)?)[\s\n]/i) {
221 $config_options->{swapsize
} = $1;
224 if ($cmdline =~ m/maxroot=(\d+(\.\d+)?)[\s\n]/i) {
225 $config_options->{maxroot
} = $1;
228 if ($cmdline =~ m/minfree=(\d+(\.\d+)?)[\s\n]/i) {
229 $config_options->{minfree
} = $1;
232 if ($setup->{product
} eq 'pve') {
233 if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
234 $config_options->{maxvz
} = $1;
238 my $postfix_main_cf = <<_EOD;
239 # See /usr/share/postfix/main.cf.dist for a commented, more complete version
243 smtpd_banner = \$myhostname ESMTP \$mail_name (Debian/GNU)
246 # appending .domain is the MUA's job.
247 append_dot_mydomain = no
249 # Uncomment the next line to generate "delayed mail" warnings
250 #delay_warning_time = 4h
252 alias_maps = hash:/etc/aliases
253 alias_database = hash:/etc/aliases
254 mydestination = \$myhostname, localhost.\$mydomain, localhost
256 mynetworks = 127.0.0.0/8
257 inet_interfaces = loopback-only
258 recipient_delimiter = +
265 return String
::ShellQuote
::shell_quote
($str);
271 die "no arguments" if !$cmd;
273 return $cmd if !ref($cmd);
276 foreach my $arg (@$cmd) { push @qa, shellquote
($arg); }
278 return join (' ', @qa);
284 return run_command
($cmd, undef, undef, 1);
288 my ($cmd, $func, $input, $noout) = @_;
294 # see 'man bash' for option pipefail
295 $cmd = [ '/bin/bash', '-c', "set -o pipefail && $cmd" ];
300 $cmdstr = cmd2string
($cmd);
304 if ($input && ($cmdstr !~ m/chpasswd/)) {
305 $cmdtxt = "# $cmdstr <<EOD\n$input";
307 $cmdtxt .= "\nEOD\n";
309 $cmdtxt = "# $cmdstr\n";
317 print $logfd $cmdtxt;
319 my $reader = IO
::File-
>new();
320 my $writer = IO
::File-
>new();
321 my $error = IO
::File-
>new();
327 $pid = open3
($writer, $reader, $error, @$cmd) || die $!;
333 if ($orig_pid != $$) {
340 print $writer $input if defined $input;
343 my $select = new IO
::Select
;
344 $select->add ($reader);
345 $select->add ($error);
347 my ($ostream, $logout) = ('', '', '');
349 while ($select->count) {
350 my @handles = $select->can_read (0.2);
352 Gtk3
::main_iteration
() while Gtk3
::events_pending
();
354 next if !scalar (@handles); # timeout
356 foreach my $h (@handles) {
358 my $count = sysread ($h, $buf, 4096);
359 if (!defined ($count)) {
363 die "command '$cmd' failed: $err";
365 $select->remove ($h) if !$count;
367 $ostream .= $buf if !($noout || $func);
369 while ($logout =~ s/^([^\010\r\n]*)(\r|\n|(\010)+|\r\n)//s) {
371 &$func($line) if $func;
374 } elsif ($h eq $error) {
375 $ostream .= $buf if !($noout || $func);
383 &$func($logout) if $func;
385 my $rv = waitpid ($pid, 0);
387 return $? if $noout; # behave like standard system();
390 die "command '$cmdstr' failed to execute\n";
391 } elsif (my $sig = ($? & 127)) {
392 die "command '$cmdstr' failed - got signal $sig\n";
393 } elsif (my $exitcode = ($? >> 8)) {
394 die "command '$cmdstr' failed with exit code $exitcode";
402 print "trying to detect country...\n";
403 my $cpid = open2
(\
*TMP
, undef, "traceroute -N 1 -q 1 -n 8.8.8.8");
404 return undef if !$cpid;
408 my $previous_alarm = alarm (10);
410 local $SIG{ALRM
} = sub { die "timed out!\n" };
412 while (defined ($line = <TMP
>)) {
413 print $logfd "DC TRACEROUTE: $line";
414 if ($line =~ m/\s*\d+\s+(\d+\.\d+\.\d+\.\d+)\s/) {
415 my $geoip = `geoiplookup $1`;
416 print $logfd "DC GEOIP: $geoip";
417 if ($geoip =~ m/GeoIP Country Edition:\s*([A-Z]+),/) {
419 print $logfd "DC FOUND: $country\n";
428 alarm ($previous_alarm);
433 print "unable to detect country - $err\n";
435 print "detected country: " . uc($country) . "\n";
437 print "unable to detect country\n";
445 open (MEMINFO, "/proc/meminfo");
447 my $res = 512; # default to 512 if something goes wrong
448 while (my $line = <MEMINFO>) {
449 if ($line =~ m/^MemTotal:\s+(\d+)\s*kB/i) {
450 $res = int ($1 / 1024);
459 my $total_memory = get_memtotal();
462 my ($src, $dest) = @_;
464 my ($dev1,$ino1) = stat ($src);
465 my ($dev2,$ino2) = stat ($dest);
467 return 0 if !($dev1 && $dev2 && $ino1 && $ino2);
469 return $ino1 == $ino2 && $dev1 == $dev2;
472 sub find_stable_path {
473 my ($stabledir, $bdev) = @_;
475 foreach my $path (<$stabledir/*>) {
476 if (link_points_to ($path, $bdev)) {
477 return wantarray ? ($path, basename($path)) : $path;
482 sub find_dev_by_uuid {
485 my ($full_path, $name) = find_stable_path ("/dev/disk/by-uuid", $bdev);
495 push @$res, [-1, $opt_testmode, int((-s $opt_testmode)/512), "TESTDISK"];
501 foreach my $bd (</sys/block/*>) {
502 next if $bd =~ m|^/sys/block/ram\d+$|;
503 next if $bd =~ m|^/sys/block/loop\d+$|;
504 next if $bd =~ m|^/sys/block/md\d+$|;
505 next if $bd =~ m|^/sys/block/dm-.*$|;
506 next if $bd =~ m|^/sys/block/fd\d+$|;
507 next if $bd =~ m|^/sys/block/sr\d+$|;
509 my $dev = file_read_firstline("$bd/dev");
514 my $info = `udevadm info
--path
$bd --query all
`;
517 next if $info !~ m/^E: DEVTYPE=disk$/m;
519 next if $info =~ m/^E: ID_CDROM/m;
521 my ($name) = $info =~ m/^N: (\S+)$/m;
524 my $real_name = "/dev/$name";
526 my $size = file_read_firstline("$bd/size");
528 $size = undef if !($size && $size =~ m/^\d+$/);
530 my $model = file_read_firstline("$bd/device/model") || '';
533 if (length ($model) > 30) {
534 $model = substr ($model, 0, 30);
536 push @$res, [$count++, $real_name, $size, $model] if $size;
538 print STDERR "ERROR: unable to map device $dev ($bd)\n";
546 my $countryfn = "${proxmox_libdir}/country.dat";
547 open (TMP, "<$countryfn") || die "unable to open '$countryfn' - $!\n";
550 my $countryhash = {};
553 while (defined ($line = <TMP>)) {
554 if ($line =~ m|^map:([^\s:]+):([^:]+):([^:]+):([^:]+):([^:]+):([^:]*):$|) {
562 $kmaphash->{$2} = $1;
563 } elsif ($line =~ m|^([a-z]{2}):([^:]+):([^:]*):([^:]*):$|) {
569 $countryhash->{lc($2)} = $1;
571 warn "unable to parse 'country.dat' line: $line";
578 my $zonefn = "/usr/share/zoneinfo/zone.tab";
579 open (TMP, "<$zonefn") || die "unable to open '$zonefn' - $!\n";
580 while (defined ($line = <TMP>)) {
581 next if $line =~ m/^\#/;
582 next if $line =~ m/^\s*$/;
583 if ($line =~ m|^([A-Z][A-Z])\s+\S+\s+(([^/]+)/\S+)\s|) {
585 $cczones->{$cc}->{$2} = 1;
586 $country->{$cc}->{zone} = $2 if !defined ($country->{$cc}->{zone});
597 countryhash => $countryhash,
599 kmaphash => $kmaphash,
603 # search for Harddisks
604 my $hds = hd_list ();
609 foreach my $hd (@$hds) {
610 my ($disk, $devname, $size, $model) = @$hd;
611 # size is always in 512B "sectors"! convert to KB
612 return int($size/2) if $devname eq $dev;
615 die "no such device '$dev'\n";
618 sub get_partition_dev {
619 my ($dev, $partnum) = @_;
621 if ($dev =~ m|^/dev/[hxsev]d[a-z]$|) {
622 return "${dev}$partnum";
623 } elsif ($dev =~ m|^/dev/[^/]+/c\d+d\d+$|) {
624 return "${dev}p$partnum";
625 } elsif ($dev =~ m|^/dev/[^/]+/d\d+$|) {
626 return "${dev}p$partnum";
627 } elsif ($dev =~ m|^/dev/[^/]+/hd[a-z]$|) {
628 return "${dev}$partnum";
629 } elsif ($dev =~ m|^/dev/nvme\d+n\d+$|) {
630 return "${dev}p$partnum";
632 die "unable to get device for partition $partnum on device $dev\n";
637 sub file_get_contents {
638 my ($filename, $max) = @_;
640 my $fh = IO::File->new($filename, "r") ||
641 die "can't open '$filename' - $!\n";
643 local $/; # slurp mode
653 my ($text, $filename) = @_;
655 my $fd = IO::File->new (">$filename") ||
656 die "unable to open file '$filename' - $!\n";
661 sub update_progress {
662 my ($frac, $start, $end, $text) = @_;
664 my $part = $end - $start;
665 my $res = $start + $frac*$part;
667 $progress->set_fraction ($res);
668 $progress->set_text (sprintf ("%d%%", int ($res*100)));
669 $progress_status->set_text ($text) if defined ($text);
671 display_info() if $res < 0.9;
673 Gtk3::main_iteration() while Gtk3::events_pending();
678 mkfs => 'mkfs.ext3 -F',
680 mkfs_data_opt => '-m 0',
681 root_mountopt => 'errors=remount-ro',
684 mkfs => 'mkfs.ext4 -F',
686 mkfs_data_opt => '-m 0',
687 root_mountopt => 'errors=remount-ro',
690 mkfs => 'mkfs.xfs -f',
697 sub create_filesystem {
698 my ($dev, $name, $type, $start, $end, $fs, $fe) = @_;
700 my $range = $end - $start;
701 my $rs = $start + $range*$fs;
702 my $re = $start + $range*$fe;
705 my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
706 my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
708 update_progress (0, $rs, $re, "creating $name filesystem");
710 run_command ("$fsdata->{mkfs} $opts $dev", sub {
713 if ($line =~ m/Writing inode tables:\s+(\d+)\/(\d+)/) {
715 } elsif ($max && $line =~ m/(\d+)\/$max/) {
716 update_progress (($1/$max)*0.9, $rs, $re);
717 } elsif ($line =~ m/Creating journal.*done/) {
718 update_progress (0.95, $rs, $re);
719 } elsif ($line =~ m/Writing superblocks and filesystem.*done/) {
720 update_progress (1, $rs, $re);
726 my ($targetdir, $dcdata) = @_;
728 my $cfgfile = "/tmp/debconf.txt";
729 write_config ($dcdata, "$targetdir/$cfgfile");
730 syscmd ("chroot $targetdir debconf-set-selections $cfgfile");
731 unlink "$targetdir/$cfgfile";
735 my ($targetdir, $cmd, $new_cmd) = @_;
737 syscmd ("chroot $targetdir dpkg-divert --package proxmox " .
738 "--add --rename $cmd") == 0 ||
739 die "unable to exec dpkg-divert\n";
741 syscmd ("ln -sf ${new_cmd} $targetdir/$cmd") == 0 ||
742 die "unable to link diversion to ${new_cmd}\n";
745 sub diversion_remove {
746 my ($targetdir, $cmd) = @_;
748 syscmd ("mv $targetdir/${cmd}.distrib $targetdir/${cmd};") == 0 ||
749 die "unable to remove $cmd diversion\n";
751 syscmd ("chroot $targetdir dpkg-divert --remove $cmd") == 0 ||
752 die "unable to remove $cmd diversion\n";
756 my ($partitions, $mode) = @_;
758 die "unknown btrfs mode '$mode'"
759 if !($mode eq 'single' || $mode eq 'raid0' ||
760 $mode eq 'raid1' || $mode eq 'raid10');
762 my $cmd = ['mkfs.btrfs', '-f'];
764 push @$cmd, '-d', $mode, '-m', $mode;
766 push @$cmd, @$partitions;
771 sub zfs_create_rpool {
774 my $cmd = "zpool create -f -o cachefile=none";
776 $cmd .= " -o ashift=$config_options->{ashift}"
777 if defined($config_options->{ashift});
779 syscmd ("$cmd $zfspoolname $vdev") == 0 ||
780 die "unable to create zfs root pool\n";
782 syscmd ("zfs create $zfspoolname/ROOT") == 0 ||
783 die "unable to create zfs $zfspoolname/ROOT volume\n";
785 if ($setup->{product} eq 'pve') {
786 syscmd ("zfs create $zfspoolname/data") == 0 ||
787 die "unable to create zfs $zfspoolname/data volume\n";
790 syscmd ("zfs create $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
791 die "unable to create zfs $zfspoolname/ROOT/$zfsrootvolname volume\n";
793 # disable atime during install
794 syscmd ("zfs set atime=off $zfspoolname") == 0 ||
795 die "unable to set zfs properties\n";
797 my $value = $config_options->{compress};
798 syscmd ("zfs set compression=$value $zfspoolname")
799 if defined($value) && $value ne 'off';
801 $value = $config_options->{checksum};
802 syscmd ("zfs set checksum=$value $zfspoolname")
803 if defined($value) && $value ne 'on';
805 $value = $config_options->{copies};
806 syscmd ("zfs set copies=$value $zfspoolname")
807 if defined($value) && $value != 1;
810 sub zfs_create_swap {
813 my $cmd = "zfs create -V ${swapsize}K -b 4K";
815 $cmd .= " -o com.sun:auto-snapshot=false";
817 # copies for swap does not make sense
818 $cmd .= " -o copies=1";
820 # reduces memory pressure
821 $cmd .= " -o sync=always";
823 # cheapest compression to drop zero pages
824 $cmd .= " -o compression=zle";
827 $cmd .= " -o logbias=throughput";
828 # only cache metadata in RAM (caching swap content does not make sense)
829 $cmd .= " -o primarycache=metadata";
830 # don't cache anything in L2ARC
831 $cmd .= " -o secondarycache=none";
833 $cmd .= " $zfspoolname/swap";
834 syscmd ($cmd) == 0 ||
835 die "unable to create zfs swap device\n";
837 return "/dev/zvol/$zfspoolname/swap";
840 my $udevadm_trigger_block = sub {
843 sleep(1) if !$nowait; # give kernel time to reread part table
845 # trigger udev to create /dev/disk/by-uuid
846 syscmd ("udevadm trigger --subsystem-match block");
847 syscmd ("udevadm settle --timeout 10");
850 my $clean_disk = sub {
853 my $partitions = `lsblk
--output kname
--noheadings
--path
--list
$disk`;
854 foreach my $part (split "\n", $partitions) {
855 next if $part eq $disk;
856 next if $part !~ /^\Q$disk\E/;
857 eval { syscmd
("pvremove -ff -y $part"); };
858 eval { syscmd
("dd if=/dev/zero of=$part bs=1M count=16"); };
862 sub partition_bootable_disk
{
863 my ($target_dev, $maxhdsize, $ptype) = @_;
865 die "too dangerous" if $opt_testmode;
867 die "unknown partition type '$ptype'"
868 if !($ptype eq '8E00' || $ptype eq '8300');
870 syscmd
("sgdisk -Z ${target_dev}");
871 my $hdsize = hd_size
($target_dev); # size in KB (1024 bytes)
873 my $restricted_hdsize_mb = 0; # 0 ==> end of partition
874 if ($maxhdsize && ($maxhdsize < $hdsize)) {
875 $hdsize = $maxhdsize;
876 $restricted_hdsize_mb = int($hdsize/1024) . 'M';
879 my $hdgb = int($hdsize/(1024*1024));
880 die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
882 # 1 - BIOS boot partition (Grub Stage2): first free 1M
883 # 2 - EFI ESP: next free 256M
884 # 3 - OS/Data partition: rest, up to $maxhdsize in MB
886 my $grubbootdev = get_partition_dev
($target_dev, 1);
887 my $efibootdev = get_partition_dev
($target_dev, 2);
888 my $osdev = get_partition_dev
($target_dev, 3);
890 my $pcmd = ['sgdisk'];
893 push @$pcmd, "-n${pnum}:1M:+1M", "-t$pnum:EF02";
896 push @$pcmd, "-n${pnum}:2M:+256M", "-t$pnum:EF00";
899 push @$pcmd, "-n${pnum}:258M:${restricted_hdsize_mb}", "-t$pnum:$ptype";
901 push @$pcmd, $target_dev;
903 my $os_size = $hdsize - 258*1024; # 256M + 1M + 1M alignment
905 syscmd
($pcmd) == 0 ||
906 die "unable to partition harddisk '${target_dev}'\n";
908 &$udevadm_trigger_block();
910 foreach my $part ($efibootdev, $osdev) {
911 syscmd
("dd if=/dev/zero of=$part bs=1M count=256") if -b
$part;
914 return ($os_size, $osdev, $efibootdev);
917 # ZFS has this use_whole_disk concept, so we try to partition the same
918 # way as zfs does by default. There is room at start of disk to insert
919 # a grub boot partition. But adding a EFI ESP is not possible.
921 # Note: zfs people think this is just a waste of space an not
922 # required. Instead, you should put the ESP on another disk (log,
925 sub partition_bootable_zfs_disk
{
926 my ($target_dev) = @_;
928 die "too dangerous" if $opt_testmode;
930 syscmd
("sgdisk -Z ${target_dev}");
931 my $hdsize = hd_size
($target_dev); # size in blocks (1024 bytes)
933 my $hdgb = int($hdsize/(1024*1024));
934 die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
936 # 1 - GRUB boot partition: 1M
937 # 2 - OS/Data partition
938 # 9 - ZFS reserved partition
940 my $grubbootdev = get_partition_dev
($target_dev, 1);
941 my $osdev = get_partition_dev
($target_dev, 2);
943 my $pcmd = ['sgdisk', '-a1'];
946 push @$pcmd, "-n$pnum:34:2047", "-t$pnum:EF02";
949 push @$pcmd, "-n$pnum:-8M:0", "-t$pnum:BF07";
952 push @$pcmd, "-n$pnum:2048:0", "-t$pnum:BF01", '-c', "$pnum:zfs";
954 push @$pcmd, $target_dev;
956 my $os_size = $hdsize - 1024 - 1024*8;
958 syscmd
($pcmd) == 0 ||
959 die "unable to partition harddisk '${target_dev}'\n";
961 &$udevadm_trigger_block();
963 syscmd
("dd if=/dev/zero of=$osdev bs=1M count=16") if -b
$osdev;
965 return ($os_size, $osdev);
968 sub create_lvm_volumes
{
969 my ($lvmdev, $os_size, $swap_size) = @_;
971 my $vgname = $setup->{product
};
973 my $rootdev = "/dev/$vgname/root";
974 my $datadev = "/dev/$vgname/data";
975 my $swapfile = "/dev/$vgname/swap";
977 # we use --metadatasize 250k, which results in "pe_start = 512"
978 # so pe_start is aligned on a 128k boundary (advantage for SSDs)
979 syscmd
("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
980 die "unable to initialize physical volume $lvmdev\n";
981 syscmd
("/sbin/vgcreate $vgname $lvmdev") == 0 ||
982 die "unable to create volume group '$vgname'\n";
984 my $hdgb = int($os_size/(1024*1024));
985 my $space = (($hdgb > 128) ?
16 : ($hdgb/8))*1024*1024;
990 if ($setup->{product
} eq 'pve') {
993 if ($config_options->{maxroot
}) {
994 $maxroot = $config_options->{maxroot
};
999 $rootsize = (($hdgb > ($maxroot*4)) ?
$maxroot : $hdgb/4)*1024*1024;
1001 my $rest = $os_size - $swap_size - $rootsize; # in KB
1004 if ($config_options->{minfree
}) {
1005 $minfree = (($config_options->{minfree
}*1024*1024) >= $rest ) ?
$space :
1006 $config_options->{minfree
}*1024*1024 ;
1011 $rest = $rest - $minfree;
1013 if ($config_options->{maxvz
}) {
1014 $rest = (($config_options->{maxvz
}*1024*1024) <= $rest) ?
1015 $config_options->{maxvz
}*1024*1024 : $rest;
1021 my $minfree = $config_options->{minfree
} ?
$config_options->{minfree
}*1024*1024 : $space;
1022 $rootsize = $os_size - $minfree - $swap_size; # in KB
1025 syscmd
("/sbin/lvcreate -L${swap_size}K -nswap $vgname") == 0 ||
1026 die "unable to create swap volume\n";
1028 syscmd
("/sbin/lvcreate -L${rootsize}K -nroot $vgname") == 0 ||
1029 die "unable to create root volume\n";
1032 syscmd
("/sbin/lvcreate -L${datasize}K -ndata $vgname") == 0 ||
1033 die "unable to create data volume\n";
1035 syscmd
("/sbin/lvconvert --yes --type thin-pool $vgname/data") == 0 ||
1036 die "unable to create data thin-pool\n";
1041 syscmd
("/sbin/vgchange -a y $vgname") == 0 ||
1042 die "unable to activate volume group\n";
1044 return ($rootdev, $swapfile, $datadev);
1047 sub compute_swapsize
{
1050 my $hdgb = int($hdsize/(1024*1024));
1053 if ($config_options->{swapsize
}) {
1054 $swapsize = $config_options->{swapsize
}*1024*1024;
1056 my $ss = int ($total_memory / 1024);
1058 $ss = ($hdgb/8) if $ss > ($hdgb/8);
1060 $swapsize = $ss*1024*1024;
1068 my ($basefile, $targetdir) = @_;
1070 die "target '$targetdir' does not exist\n" if ! -d
$targetdir;
1072 my $starttime = [Time
::HiRes
::gettimeofday
];
1074 my $bootdevinfo = [];
1082 my $filesys = $config_options->{filesys
};
1084 if ($filesys =~ m/zfs/) {
1085 $target_hd = undef; # do not use this config
1087 $targetdir = "/$zfspoolname/ROOT/$zfsrootvolname";
1088 } elsif ($filesys =~ m/btrfs/) {
1089 $target_hd = undef; # do not use this config
1095 for ($i = 5; $i > 0; $i--) {
1096 syscmd
("modprobe zfs");
1097 last if -c
"/dev/zfs";
1101 die "unable to load zfs kernel module\n" if !$i;
1109 update_progress
(0, 0, $maxper, "create partitions");
1111 syscmd
("vgchange -an") if !$opt_testmode; # deactivate all detected VGs
1113 if ($opt_testmode) {
1115 $rootdev = abs_path
($opt_testmode);
1116 syscmd
("umount $rootdev");
1120 die "unsupported btrfs mode (for testing environment)\n"
1121 if $filesys ne 'btrfs (RAID0)';
1123 btrfs_create
([$rootdev], 'single');
1125 } elsif ($use_zfs) {
1127 die "unsupported zfs mode (for testing environment)\n"
1128 if $filesys ne 'zfs (RAID0)';
1130 syscmd
("zpool destroy $zfstestpool");
1132 zfs_create_rpool
($rootdev);
1139 } elsif ($use_btrfs) {
1141 my ($devlist, $btrfs_mode) = get_btrfs_raid_setup
();
1142 my $btrfs_partitions = [];
1144 foreach my $hd (@$devlist) {
1145 my $devname = @$hd[1];
1146 &$clean_disk($devname);
1147 my ($size, $osdev, $efidev) =
1148 partition_bootable_disk
($devname, undef, '8300');
1149 $rootdev = $osdev if !defined($rootdev); # simply point to first disk
1150 my $by_id = find_stable_path
("/dev/disk/by-id", $devname);
1151 push @$bootdevinfo, { esp
=> $efidev, devname
=> $devname,
1152 osdev
=> $osdev, by_id
=> $by_id };
1153 push @$btrfs_partitions, $osdev;
1157 &$udevadm_trigger_block();
1159 btrfs_create
($btrfs_partitions, $btrfs_mode);
1161 } elsif ($use_zfs) {
1163 my ($devlist, $bootdevlist, $vdev) = get_zfs_raid_setup
();
1166 foreach my $hd (@$devlist) {
1167 &$clean_disk(@$hd[1]);
1169 foreach my $hd (@$bootdevlist) {
1170 my $devname = @$hd[1];
1171 my ($size, $osdev) =
1172 partition_bootable_zfs_disk
($devname);
1173 zfs_mirror_size_check
($disksize, $size) if $disksize;
1174 push @$bootdevinfo, { devname
=> $devname, osdev
=> $osdev};
1178 &$udevadm_trigger_block();
1180 foreach my $di (@$bootdevinfo) {
1181 my $devname = $di->{devname
};
1182 $di->{by_id
} = find_stable_path
("/dev/disk/by-id", $devname);
1184 # Note: using /dev/disk/by-id/ does not work for unknown reason, we get
1185 # cannot create 'rpool': no such pool or dataset
1186 #my $osdev = find_stable_path ("/dev/disk/by-id", $di->{osdev}) || $di->{osdev};
1188 my $osdev = $di->{osdev
};
1189 $vdev =~ s/ $devname/ $osdev/;
1192 zfs_create_rpool
($vdev);
1194 my $swap_size = compute_swapsize
($disksize);
1195 $swapfile = zfs_create_swap
($swap_size);
1199 die "target '$target_hd' is not a valid block device\n" if ! -b
$target_hd;
1202 if ($config_options->{hdsize
}) {
1203 # max hdsize passed on cmdline (GB)
1204 $maxhdsize = $config_options->{hdsize
}*1024*1024;
1207 &$clean_disk($target_hd);
1209 my ($os_size, $osdev, $efidev);
1210 ($os_size, $osdev, $efidev) =
1211 partition_bootable_disk
($target_hd, $maxhdsize, '8E00');
1213 &$udevadm_trigger_block();
1215 my $by_id = find_stable_path
("/dev/disk/by-id", $target_hd);
1216 push @$bootdevinfo, { esp
=> $efidev, devname
=> $target_hd,
1217 osdev
=> $osdev, by_id
=> $by_id };
1219 my $swap_size = compute_swapsize
($os_size);
1220 ($rootdev, $swapfile) =
1221 create_lvm_volumes
($osdev, $os_size, $swap_size);
1223 # trigger udev to create /dev/disk/by-uuid
1224 &$udevadm_trigger_block(1);
1228 # to be fast during installation
1229 syscmd
("zfs set sync=disabled $zfspoolname") == 0 ||
1230 die "unable to set zfs properties\n";
1233 update_progress
(0.03, 0, $maxper, "create swap space");
1235 syscmd
("mkswap -f $swapfile") == 0 ||
1236 die "unable to create swap space\n";
1239 update_progress
(0.05, 0, $maxper, "creating filesystems");
1241 foreach my $di (@$bootdevinfo) {
1242 next if !$di->{esp
};
1243 syscmd
("mkfs.vfat -F32 $di->{esp}") == 0 ||
1244 die "unable to initialize EFI ESP on device $di->{esp}\n";
1249 } elsif ($use_btrfs) {
1252 create_filesystem
($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1);
1255 update_progress
(1, 0.05, $maxper, "mounting target $rootdev");
1260 my $mount_opts = 'noatime';
1261 $mount_opts .= ',nobarrier'
1262 if $use_btrfs || $filesys =~ /^ext\d$/;
1264 syscmd
("mount -n $rootdev -o $mount_opts $targetdir") == 0 ||
1265 die "unable to mount $rootdev\n";
1268 mkdir "$targetdir/boot";
1269 mkdir "$targetdir/boot/efi";
1271 mkdir "$targetdir/var";
1272 mkdir "$targetdir/var/lib";
1274 if ($setup->{product
} eq 'pve') {
1275 mkdir "$targetdir/var/lib/vz";
1276 mkdir "$targetdir/var/lib/pve";
1279 syscmd
("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
1280 die "unable to create btrfs subvolume\n";
1284 update_progress
(1, 0.05, $maxper, "extracting base system");
1286 my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
1287 $ino || die "unable to open file '$basefile' - $!\n";
1289 my $files = file_read_firstline
("${proxmox_cddir}/proxmox/$setup->{product}-base.cnt") ||
1290 die "unable to read base file count\n";
1295 run_command
("unsquashfs -f -dest $targetdir -i $basefile", sub {
1297 return if $line !~ m/^$targetdir/;
1299 my $nper = int (($count *100)/$files);
1300 if ($nper != $per) {
1302 my $frac = $per > 100 ?
1 : $per/100;
1303 update_progress
($frac, $maxper, 0.5);
1307 syscmd
("mount -n -t tmpfs tmpfs $targetdir/tmp") == 0 ||
1308 die "unable to mount tmpfs on $targetdir/tmp\n";
1309 syscmd
("mount -n -t proc proc $targetdir/proc") == 0 ||
1310 die "unable to mount proc on $targetdir/proc\n";
1311 syscmd
("mount -n -t sysfs sysfs $targetdir/sys") == 0 ||
1312 die "unable to mount sysfs on $targetdir/sys\n";
1314 update_progress
(1, $maxper, 0.5, "configuring base system");
1319 "127.0.0.1 localhost.localdomain localhost\n" .
1320 "$ipaddress $hostname.$domain $hostname pvelocalhost\n\n" .
1321 "# The following lines are desirable for IPv6 capable hosts\n\n" .
1322 "::1 ip6-localhost ip6-loopback\n" .
1323 "fe00::0 ip6-localnet\n" .
1324 "ff00::0 ip6-mcastprefix\n" .
1325 "ff02::1 ip6-allnodes\n" .
1326 "ff02::2 ip6-allrouters\n" .
1327 "ff02::3 ip6-allhosts\n";
1329 write_config
($hosts, "$targetdir/etc/hosts");
1331 write_config
("$hostname\n", "$targetdir/etc/hostname");
1333 syscmd
("/bin/hostname $hostname") if !$opt_testmode;
1335 # configure interfaces
1337 my $ifaces = "auto lo\niface lo inet loopback\n\n";
1339 my $ntype = $ipversion == 4 ?
'inet' : 'inet6';
1341 my $ethdev = $ipconf->{ifaces
}->{$ipconf->{selected
}}->{name
};
1343 if ($setup->{bridged_network
}) {
1344 $ifaces .= "iface $ethdev $ntype manual\n";
1347 "\nauto vmbr0\niface vmbr0 $ntype static\n" .
1348 "\taddress $ipaddress\n" .
1349 "\tnetmask $netmask\n" .
1350 "\tgateway $gateway\n" .
1351 "\tbridge_ports $ethdev\n" .
1352 "\tbridge_stp off\n" .
1355 $ifaces .= "auto $ethdev\n" .
1356 "iface $ethdev $ntype static\n" .
1357 "\taddress $ipaddress\n" .
1358 "\tnetmask $netmask\n" .
1359 "\tgateway $gateway\n";
1362 foreach my $iface (sort keys %{$ipconf->{ifaces
}}) {
1363 my $name = $ipconf->{ifaces
}->{$iface}->{name
};
1364 next if $name eq $ethdev;
1366 $ifaces .= "\niface $name $ntype manual\n";
1369 write_config
($ifaces, "$targetdir/etc/network/interfaces");
1373 my $resolvconf = "search $domain\nnameserver $dnsserver\n";
1374 write_config
($resolvconf, "$targetdir/etc/resolv.conf");
1378 my $fstab = "# <file system> <mount point> <type> <options> <dump> <pass>\n";
1382 } elsif ($use_btrfs) {
1384 my $cmd = "blkid -u filesystem -t TYPE=btrfs -o export $rootdev";
1385 run_command
($cmd, sub {
1388 if ($line =~ m/^UUID=([A-Fa-f0-9\-]+)$/) {
1393 die "unable to detect FS UUID" if !defined($fsuuid);
1395 $fstab .= "UUID=$fsuuid / btrfs defaults 0 1\n";
1397 my $root_mountopt = $fssetup->{$filesys}->{root_mountopt
} || 'defaults';
1398 $fstab .= "$rootdev / $filesys ${root_mountopt} 0 1\n";
1402 # Note: this is required by current grub, but really dangerous, because
1403 # vfat does not have journaling, so it triggers manual fsck after each crash
1404 # so we only mount /boot/efi if really required (efi systems).
1405 if ($grub_plattform =~ m/^efi-/) {
1406 if (scalar(@$bootdevinfo)) {
1407 my $di = @$bootdevinfo[0]; # simply use first disk
1409 my $efi_boot_uuid = $di->{esp
};
1410 if (my $uuid = find_dev_by_uuid
($di->{esp
})) {
1411 $efi_boot_uuid = "UUID=$uuid";
1414 $fstab .= "${efi_boot_uuid} /boot/efi vfat defaults 0 1\n";
1420 $fstab .= "$swapfile none swap sw 0 0\n" if $swapfile;
1422 $fstab .= "proc /proc proc defaults 0 0\n";
1424 write_config
($fstab, "$targetdir/etc/fstab");
1425 write_config
("", "$targetdir/etc/mtab");
1427 syscmd
("cp ${proxmox_libdir}/policy-disable-rc.d " .
1428 "$targetdir/usr/sbin/policy-rc.d") == 0 ||
1429 die "unable to copy policy-rc.d\n";
1430 syscmd
("cp ${proxmox_libdir}/fake-start-stop-daemon " .
1431 "$targetdir/sbin/") == 0 ||
1432 die "unable to copy start-stop-daemon\n";
1434 diversion_add
($targetdir, "/sbin/start-stop-daemon", "/sbin/fake-start-stop-daemon");
1435 diversion_add
($targetdir, "/usr/sbin/update-grub", "/bin/true");
1436 diversion_add
($targetdir, "/usr/sbin/update-initramfs", "/bin/true");
1438 syscmd
("touch $targetdir/proxmox_install_mode");
1440 my $grub_install_devices_txt = '';
1441 foreach my $di (@$bootdevinfo) {
1442 $grub_install_devices_txt .= ', ' if $grub_install_devices_txt;
1443 $grub_install_devices_txt .= $di->{by_id
} || $di->{devname
};
1446 # Note: keyboard-configuration/xbkb-keymap is used by console-setup
1447 my $xkmap = $cmap->{kmap
}->{$keymap}->{x11
} // 'us';
1449 debconfig_set
($targetdir, <<_EOD);
1450 locales locales/default_environment_locale select en_US.UTF-8
1451 locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
1452 samba-common samba-common/dhcp boolean false
1453 samba-common samba-common/workgroup string WORKGROUP
1454 postfix postfix/main_mailer_type select No configuration
1455 keyboard-configuration keyboard-configuration/xkb-keymap select $xkmap
1456 d-i debian-installer/locale select en_US.UTF-8
1457 grub-pc grub-pc/install_devices select $grub_install_devices_txt
1461 while (<${proxmox_pkgdir
}/*.deb
>) { $pkg_count++ };
1463 # btrfs/dpkg is extremely slow without --force-unsafe-io
1464 my $dpkg_opts = $use_btrfs ?
"--force-unsafe-io" : "";
1467 while (<${proxmox_pkgdir
}/*.deb
>) {
1470 my ($deb) = $path =~ m/${proxmox_pkgdir}\/(.*\
.deb
)/;
1471 # if ($deb =~ m/^grub-efi-/ && $deb !~ m/^grub-${grub_plattform}/) {
1475 update_progress
($count/$pkg_count, 0.5, 0.75, "extracting $deb");
1476 print "extracting: $deb\n";
1477 syscmd
("cp $path $targetdir/tmp/$deb") == 0 ||
1478 die "installation of package $deb failed\n";
1479 syscmd
("chroot $targetdir dpkg $dpkg_opts --force-depends --no-triggers --unpack /tmp/$deb") == 0 ||
1480 die "installation of package $deb failed\n";
1481 update_progress
((++$count)/$pkg_count, 0.5, 0.75);
1484 # needed for postfix postinst in case no other NIC is active
1485 syscmd
("chroot $targetdir ifup lo");
1487 my $cmd = "chroot $targetdir dpkg $dpkg_opts --force-confold --configure -a";
1489 run_command
($cmd, sub {
1491 if ($line =~ m/Setting up\s+(\S+)/) {
1492 update_progress
((++$count)/$pkg_count, 0.75, 0.95,
1497 unlink "$targetdir/etc/mailname";
1498 $postfix_main_cf =~ s/__FQDN__/${hostname}.${domain}/;
1499 write_config
($postfix_main_cf, "$targetdir/etc/postfix/main.cf");
1501 # make sure we have all postfix directories
1502 syscmd
("chroot $targetdir /usr/sbin/postfix check");
1503 # cleanup mail queue
1504 syscmd
("chroot $targetdir /usr/sbin/postsuper -d ALL");
1506 # enable NTP (timedatectl set-ntp true does not work without DBUS)
1507 syscmd
("chroot $targetdir /bin/systemctl enable systemd-timesyncd.service");
1509 unlink "$targetdir/proxmox_install_mode";
1512 unlink ("$targetdir/etc/localtime");
1513 symlink ("/usr/share/zoneinfo/$timezone", "$targetdir/etc/localtime");
1514 write_config
("$timezone\n", "$targetdir/etc/timezone");
1517 if (my $mirror = $cmap->{country
}->{$country}->{mirror
}) {
1518 my $fn = "$targetdir/etc/apt/sources.list";
1519 syscmd
("sed -i 's/ftp\\.debian\\.org/$mirror/' '$fn'");
1522 # create extended_states for apt (avoid cron job warning if that
1523 # file does not exist)
1524 write_config
('', "$targetdir/var/lib/apt/extended_states");
1526 # allow ssh root login
1527 syscmd
(['sed', '-i', 's/^#\?PermitRootLogin.*/PermitRootLogin yes/', "$targetdir/etc/ssh/sshd_config"]);
1529 if ($setup->{product
} eq 'pmg') {
1530 # install initial clamav DB
1531 my $srcdir = "${proxmox_cddir}/proxmox/clamav";
1532 foreach my $fn ("main.cvd", "bytecode.cvd", "daily.cvd", "safebrowsing.cvd") {
1533 syscmd
("cp \"$srcdir/$fn\" \"$targetdir/var/lib/clamav\"") == 0 ||
1534 die "installation of clamav db file '$fn' failed\n";
1536 syscmd
("chroot $targetdir /bin/chown clamav:clamav -R /var/lib/clamav") == 0 ||
1537 die "unable to set owner for clamav database files\n";
1540 if ($setup->{product
} eq 'pve') {
1541 # save installer settings
1542 my $ucc = uc ($country);
1543 debconfig_set
($targetdir, "pve-manager pve-manager/country string $ucc\n");
1546 update_progress
(0.8, 0.95, 1, "make system bootable");
1549 syscmd
("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/$zfsrootvolname boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
1550 die "unable to update /etc/default/grub\n";
1554 diversion_remove
($targetdir, "/usr/sbin/update-grub");
1555 diversion_remove
($targetdir, "/usr/sbin/update-initramfs");
1558 foreach my $fn (<$targetdir/lib/modules/*>) {
1559 if ($fn =~ m!/(\d+\.\d+\.\d+-\d+-pve)$!) {
1560 die "found multiple kernels\n" if defined($kapi);
1564 die "unable to detect kernel version\n" if !defined($kapi);
1566 if (!$opt_testmode) {
1568 unlink ("$targetdir/etc/mtab");
1569 symlink ("/proc/mounts", "$targetdir/etc/mtab");
1570 syscmd
("mount -n --bind /dev $targetdir/dev");
1572 syscmd
("chroot $targetdir /usr/sbin/update-initramfs -c -k $kapi") == 0 ||
1573 die "unable to install initramfs\n";
1575 foreach my $di (@$bootdevinfo) {
1576 my $dev = $di->{devname
};
1577 syscmd
("chroot $targetdir /usr/sbin/grub-install --target i386-pc --no-floppy --bootloader-id='proxmox' $dev") == 0 ||
1578 die "unable to install the i386-pc boot loader on '$dev'\n";
1581 syscmd
("mount -n $di->{esp} -t vfat $targetdir/boot/efi") == 0 ||
1582 die "unable to mount $di->{esp}\n";
1583 my $rc = syscmd
("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev");
1585 if (-d
'/sys/firmware/efi') {
1586 die "unable to install the EFI boot loader on '$dev'\n";
1588 warn "unable to install the EFI boot loader on '$dev', ignoring (not booted using UEFI)\n";
1591 # also install fallback boot file (OVMF does not boot without)
1592 mkdir("$targetdir/boot/efi/EFI/BOOT");
1593 syscmd
("cp $targetdir/boot/efi/EFI/proxmox/grubx64.efi $targetdir/boot/efi/EFI/BOOT/BOOTx64.EFI") == 0 ||
1594 die "unable to copy efi boot loader\n";
1596 syscmd
("umount $targetdir/boot/efi") == 0 ||
1597 die "unable to umount $targetdir/boot/efi\n";
1601 syscmd
("chroot $targetdir /usr/sbin/update-grub") == 0 ||
1602 die "unable to update boot loader config\n";
1604 syscmd
("umount $targetdir/dev");
1609 # hack: remove dead.letter from sshd installation
1610 syscmd
("rm -rf $targetdir/dead.letter");
1612 unlink "$targetdir/usr/sbin/policy-rc.d";
1614 diversion_remove
($targetdir, "/sbin/start-stop-daemon");
1617 my $octets = encode
("utf-8", $password);
1618 run_command
("chroot $targetdir /usr/sbin/chpasswd", undef,
1621 if ($setup->{product
} eq 'pmg') {
1623 write_config
("section: admin\n\temail ${mailto}\n",
1624 "$targetdir/etc/pmg/pmg.conf");
1626 } elsif ($setup->{product
} eq 'pve') {
1630 my $tmpdir = "$targetdir/tmp/pve";
1633 # write vnc keymap to datacenter.cfg
1634 my $vnckmap = $cmap->{kmap
}->{$keymap}->{kvm
} || 'en-us';
1635 write_config
("keyboard: $vnckmap\n",
1636 "$tmpdir/datacenter.cfg");
1639 write_config
("user:root\@pam:1:0:::${mailto}::\n",
1640 "$tmpdir/user.cfg");
1643 my $strorage_cfg_fn = "$tmpdir/storage.cfg";
1645 write_config
($storage_cfg_zfs, $strorage_cfg_fn);
1646 } elsif ($use_btrfs) {
1647 write_config
($storage_cfg_btrfs, $strorage_cfg_fn);
1649 write_config
($storage_cfg_lvmthin, $strorage_cfg_fn);
1652 run_command
("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
1654 syscmd
("rm -rf $tmpdir");
1660 update_progress
(1, 0, 1, "");
1664 if ($opt_testmode) {
1665 my $elapsed = Time
::HiRes
::tv_interval
($starttime);
1666 print "Elapsed extract time: $elapsed\n";
1668 syscmd
("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> final.pkglist");
1671 syscmd
("umount $targetdir/tmp");
1672 syscmd
("umount $targetdir/proc");
1673 syscmd
("umount $targetdir/sys");
1676 syscmd
("zfs umount -a") == 0 ||
1677 die "unable to unmount zfs\n";
1679 syscmd
("umount -d $targetdir");
1682 if (!$err && $use_zfs) {
1683 syscmd
("zfs set sync=standard $zfspoolname") == 0 ||
1684 die "unable to set zfs properties\n";
1686 syscmd
("zfs set mountpoint=/ $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
1687 die "zfs set mountpoint failed\n";
1689 syscmd
("zpool set bootfs=$zfspoolname/ROOT/$zfsrootvolname $zfspoolname") == 0 ||
1690 die "zfs set bootfs failed\n";
1691 syscmd
("zpool export $zfspoolname");
1697 my $last_display_change = 0;
1699 my $display_info_counter = 0;
1701 my $display_info_items = [
1702 "extract1-license.htm",
1703 "extract2-rulesystem.htm",
1704 "extract3-spam.htm",
1705 "extract4-virus.htm",
1710 my $min_display_time = 15;
1714 return if ($ctime - $last_display_change) < $min_display_time;
1716 my $page = $display_info_items->[$display_info_counter % scalar(@$display_info_items)];
1718 $display_info_counter++;
1720 display_html
($page);
1724 my ($filename) = @_;
1726 my $path = "${proxmox_libdir}/html/$filename";
1728 my $url = "file://$path";
1730 my $data = file_get_contents
($path);
1732 if ($filename eq 'license.htm') {
1733 my $license = decode
('utf8', file_get_contents
("${proxmox_cddir}/EULA"));
1734 my $title = "END USER LICENSE AGREEMENT (EULA)";
1735 $data =~ s/__LICENSE__/$license/;
1736 $data =~ s/__LICENSE_TITLE__/$title/;
1739 $htmlview->load_html_string($data, $url);
1741 $last_display_change = time();
1745 my ($text, $fctn) = @_;
1748 $text = "_Next" if !$text;
1749 $next->set_label ($text);
1751 $next->grab_focus ();
1754 sub create_main_window
{
1756 $window = Gtk3
::Window-
>new ();
1757 $window->set_default_size (1024, 768);
1758 $window->set_has_resize_grip(0);
1759 $window->set_decorated (0) if !$opt_testmode;
1761 my $vbox = Gtk3
::VBox-
>new (0, 0);
1763 my $logofn = "$setup->{product}-banner.png";
1764 my $image = Gtk3
::Image-
>new_from_file("${proxmox_libdir}/$logofn");
1765 $vbox->pack_start ($image, 0, 0, 0);
1767 my $hbox = Gtk3
::HBox-
>new (0, 0);
1768 $vbox->pack_start ($hbox, 1, 1, 0);
1770 # my $f1 = Gtk3::Frame->new ('test');
1771 # $f1->set_shadow_type ('none');
1772 # $hbox->pack_start ($f1, 1, 1, 0);
1774 my $sep1 = Gtk3
::HSeparator-
>new;
1775 $vbox->pack_start ($sep1, 0, 0, 0);
1777 $cmdbox = Gtk3
::HBox-
>new ();
1778 $vbox->pack_start ($cmdbox, 0, 0, 10);
1780 $next = Gtk3
::Button-
>new ('_Next');
1781 $next->signal_connect (clicked
=> sub { $last_display_change = 0; &$next_fctn (); });
1782 $cmdbox->pack_end ($next, 0, 0, 10);
1783 my $abort = Gtk3
::Button-
>new ('_Abort');
1784 $abort->set_can_focus (0);
1785 $cmdbox->pack_start ($abort, 0, 0, 10);
1786 $abort->signal_connect (clicked
=> sub { exit (-1); });
1788 my $vbox2 = Gtk3
::VBox-
>new (0, 0);
1789 $hbox->add ($vbox2);
1791 $htmlview = Gtk3
::WebKit
::WebView-
>new();
1792 my $scrolls = Gtk3
::ScrolledWindow-
>new();
1793 $scrolls->add($htmlview);
1795 my $hbox2 = Gtk3
::HBox-
>new (0, 0);
1796 $hbox2->pack_start ($scrolls, 1, 1, 0);
1798 $vbox2->pack_start ($hbox2, 1, 1, 0);
1800 my $vbox3 = Gtk3
::VBox-
>new (0, 0);
1801 $vbox2->pack_start ($vbox3, 0, 0, 0);
1803 my $sep2 = Gtk3
::HSeparator-
>new;
1804 $vbox3->pack_start ($sep2, 0, 0, 0);
1806 $inbox = Gtk3
::HBox-
>new (0, 0);
1807 $vbox3->pack_start ($inbox, 0, 0, 0);
1809 $window->add ($vbox);
1812 $window->realize ();
1816 $inbox->foreach(sub {
1818 $inbox->remove ($child);
1822 # fixme: newer GTK3 has special properties to handle numbers with Entry
1823 # only allow floating point numbers with Gtk3::Entry
1826 my ($entry, $event) = @_;
1828 return check_number
($entry, $event, 1);
1832 my ($entry, $event) = @_;
1834 return check_number
($entry, $event, 0);
1838 my ($entry, $event, $float) = @_;
1840 my $val = $event->get_keyval;
1842 if (($float && $val == ord '.') ||
1843 $val == Gtk3
::Gdk
::KEY_ISO_Left_Tab
||
1844 $val == Gtk3
::Gdk
::KEY_Shift_L
||
1845 $val == Gtk3
::Gdk
::KEY_Tab
||
1846 $val == Gtk3
::Gdk
::KEY_Left
||
1847 $val == Gtk3
::Gdk
::KEY_Right
||
1848 $val == Gtk3
::Gdk
::KEY_BackSpace
||
1849 $val == Gtk3
::Gdk
::KEY_Delete
||
1850 ($val >= ord '0' && $val <= ord '9') ||
1851 ($val >= Gtk3
::Gdk
::KEY_KP_0
&&
1852 $val <= Gtk3
::Gdk
::KEY_KP_9
)) {
1859 sub create_text_input
{
1860 my ($default, $text) = @_;
1862 my $hbox = Gtk3
::HBox-
>new (0, 0);
1864 my $label = Gtk3
::Label-
>new ($text);
1865 $label->set_size_request (150, -1);
1866 $label->set_alignment (1, 0.5);
1867 $hbox->pack_start ($label, 0, 0, 10);
1868 my $e1 = Gtk3
::Entry-
>new ();
1869 $e1->set_width_chars (30);
1870 $hbox->pack_start ($e1, 0, 0, 0);
1871 $e1->set_text ($default);
1873 return ($hbox, $e1);
1881 my $links = `ip -o l`;
1882 foreach my $l (split /\n/,$links) {
1883 my ($index, $name, $flags, $state, $mac) = $l =~ m/^(\d+):\s+(\S+):\s+<(\S+)>.*\s+state\s+(\S+)\s+.*\s+link\/ether\s
+(\S
+)\s
+/;
1884 next if !$name || $name eq 'lo';
1886 my $driver = readlink "/sys/class/net/$name/device/driver" || 'unknown';
1887 $driver =~ s!^.*/!!;
1889 $ifaces->{"$index"} = {
1897 my $addresses = `ip -o a s $name`;
1898 foreach my $a (split /\n/,$addresses) {
1899 my ($family, $ip, $prefix) = $a =~ m/^\Q$index\E:\s+\Q$name\E\s+(inet|inet6)\s+($IPRE)\/(\d+)\s+/;
1901 next if $a =~ /scope\s+link/; # ignore link local
1905 if ($family eq 'inet') {
1906 next if !$ip =~ /$IPV4RE/;
1907 next if $prefix < 8 || $prefix > 32;
1908 $mask = @$ipv4_reverse_mask[$prefix];
1910 next if !$ip =~ /$IPV6RE/;
1913 $default = $index if !$default;
1915 $ifaces->{"$index"}->{"$family"} = {
1923 my $route = `ip route
`;
1924 my ($gateway) = $route =~ m/^default\s+via\s+(\S+)\s+/m;
1926 my $resolvconf = `cat
/etc/resolv
.conf
`;
1927 my ($dnsserver) = $resolvconf =~ m/^nameserver\s+(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/m;
1928 my ($domain) = $resolvconf =~ m/^domain\s+(\S+)$/m;
1931 default => $default,
1933 gateway => $gateway,
1934 dnsserver => $dnsserver,
1939 sub display_message {
1942 my $dialog = Gtk3::MessageDialog->new ($window, 'modal',
1943 'info', 'ok', $msg);
1951 my $dialog = Gtk3::MessageDialog->new ($window, 'modal',
1952 'error', 'ok', $msg);
1957 my $ipconf_first_view = 1;
1959 sub create_ipconf_view {
1962 display_html ("ipconf.htm");
1964 my $vbox = Gtk3::VBox->new (0, 0);
1965 $inbox->pack_start ($vbox, 1, 0, 0);
1966 my $hbox = Gtk3::HBox->new (0, 0);
1967 $vbox->pack_start ($hbox, 0, 0, 10);
1968 my $vbox2 = Gtk3::VBox->new (0, 0);
1969 $hbox->add ($vbox2);
1972 ($ipbox, $ipconf_entry_addr) =
1973 create_text_input ("192.168.100.2", 'IP Address:');
1976 ($maskbox, $ipconf_entry_mask) =
1977 create_text_input ("255.255.255.0", 'Netmask:');
1979 my $device_cb = Gtk3::ComboBoxText->new();
1980 $device_cb->set_active(0);
1981 $device_cb->set_visible(1);
1983 my $get_device_desc = sub {
1985 return "$iface->{name} - $iface->{mac} ($iface->{driver})";
1988 my $device_active_map = {};
1990 my $device_change_handler = sub {
1991 my $current = shift;
1992 $ipconf->{selected} = $device_active_map->{$current->get_active()};
1993 my $iface = $ipconf->{ifaces}->{$ipconf->{selected}};
1994 $ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
1995 if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
1996 $ipconf_entry_mask->set_text($iface->{inet}->{mask} || $iface->{inet6}->{mask})
1997 if $iface->{inet}->{mask} || $iface->{inet6}->{mask};
2001 foreach my $index (sort keys %{$ipconf->{ifaces}}) {
2002 $device_cb->append_text(&$get_device_desc($ipconf->{ifaces}->{$index}));
2003 $device_active_map->{$i} = $index;
2004 if ($ipconf_first_view && $index == $ipconf->{default}) {
2005 $device_cb->set_active($i);
2006 &$device_change_handler($device_cb);
2007 $ipconf_first_view = 0;
2009 $device_cb->signal_connect ('changed' => $device_change_handler);
2013 $device_cb->set_active(0)
2014 if !($ipconf->{selected});
2016 my $devicebox = Gtk3::HBox->new (0, 0);
2017 my $label = Gtk3::Label->new ("Management Interface:");
2018 $label->set_size_request (150, -1);
2019 $label->set_alignment (1, 0.5);
2020 $devicebox->pack_start ($label, 0, 0, 10);
2021 $devicebox->pack_start ($device_cb, 0, 0, 0);
2023 $vbox2->pack_start ($devicebox, 0, 0, 2);
2025 my $hn = $ipconf->{domain} ?
2026 "$setup->{product}.$ipconf->{domain}" : "$setup->{product}.example.invalid";
2028 my ($hostbox, $hostentry) =
2029 create_text_input ($hn, 'Hostname (FQDN):');
2030 $vbox2->pack_start ($hostbox, 0, 0, 2);
2032 $vbox2->pack_start ($ipbox, 0, 0, 2);
2034 $vbox2->pack_start ($maskbox, 0, 0, 2);
2036 $gateway = $ipconf->{gateway} || '192.168.100.1';
2039 ($gwbox, $ipconf_entry_gw) =
2040 create_text_input ($gateway, 'Gateway:');
2042 $vbox2->pack_start ($gwbox, 0, 0, 2);
2044 $dnsserver = $ipconf->{dnsserver} || $gateway;
2047 ($dnsbox, $ipconf_entry_dns) =
2048 create_text_input ($dnsserver, 'DNS Server:');
2050 $vbox2->pack_start ($dnsbox, 0, 0, 0);
2053 set_next (undef, sub {
2057 my $text = $hostentry->get_text();
2062 my $namere = "([a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?)";
2064 # Debian does not support purely numeric hostnames
2065 if ($text && $text =~ /^[0-9]+(?:\.|$)/) {
2066 display_message("Purely numeric hostnames are not allowed.");
2067 $hostentry->grab_focus();
2071 if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.example.invalid$/ &&
2072 $text =~ m/^([^\.]+)\.(\S+)$/) {
2076 display_message ("Hostname does not look like a fully qualified domain name.");
2077 $hostentry->grab_focus();
2083 $text = $ipconf_entry_addr->get_text();
2086 if ($text =~ m!^($IPV4RE)$!) {
2089 } elsif ($text =~ m!^($IPV6RE)$!) {
2093 display_message ("IP address is not valid.");
2094 $ipconf_entry_addr->grab_focus();
2098 $text = $ipconf_entry_mask->get_text();
2101 if (($ipversion == 6) && ($text =~ m/^(\d+)$/) && ($1 >= 8) && ($1 <= 126)) {
2103 } elsif (($ipversion == 4) && defined($ipv4_mask_hash->{$text})) {
2106 display_message ("Netmask is not valid.");
2107 $ipconf_entry_mask->grab_focus();
2111 $text = $ipconf_entry_gw->get_text();
2114 if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
2116 } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
2119 display_message ("Gateway is not valid.");
2120 $ipconf_entry_gw->grab_focus();
2124 $text = $ipconf_entry_dns->get_text();
2127 if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
2129 } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
2132 display_message ("DNS server is not valid.");
2133 $ipconf_entry_dns->grab_focus();
2137 #print "TEST $ipaddress $netmask $gateway $dnsserver\n";
2139 create_extract_view ();
2142 $hostentry->grab_focus();
2145 sub get_device_desc {
2146 my ($devname, $size, $model) = @_;
2148 if ($size && ($size > 0)) {
2149 $size = int($size/2048); # size in MB, from 512B "sectors"
2151 my $text = "$devname (";
2152 if ($size >= 1024) {
2153 $size = int($size/1024); # size in GB
2154 $text .= "${size}GB";
2156 $text .= "${size}MB";
2159 $text .= ", $model" if $model;
2168 my ($cb, $kmap) = @_;
2173 my $kmaphash = $cmap->{kmaphash};
2174 foreach my $layout (sort keys %$kmaphash) {
2175 $def = $i if $kmaphash->{$layout} eq 'en-us';
2176 $ind = $i if $kmap && $kmaphash->{$layout} eq $kmap;
2180 $cb->set_active ($ind || $def || 0);
2184 sub update_zonelist {
2185 my ($box, $cc) = @_;
2187 my $cczones = $cmap->{cczones};
2188 my $zones = $cmap->{zones};
2192 $sel = $lastzonecb->get_active_text();
2193 $box->remove ($lastzonecb);
2195 $sel = $timezone; # used once to select default
2198 my $cb = $lastzonecb = Gtk3::ComboBoxText->new();
2199 $cb->set_size_request (200, -1);
2201 $cb->signal_connect ('changed' => sub {
2202 $timezone = $cb->get_active_text();
2206 if ($cc && defined ($cczones->{$cc})) {
2207 @za = keys %{$cczones->{$cc}};
2213 foreach my $zone (sort @za) {
2214 $ind = $i if $sel && $zone eq $sel;
2215 $cb->append_text ($zone);
2219 $cb->set_active ($ind || 0);
2222 $box->pack_start ($cb, 0, 0, 0);
2225 sub create_password_view {
2229 my $vbox2 = Gtk3::VBox->new (0, 0);
2230 $inbox->pack_start ($vbox2, 1, 0, 0);
2231 my $vbox = Gtk3::VBox->new (0, 0);
2232 $vbox2->pack_start ($vbox, 0, 0, 10);
2234 my $hbox1 = Gtk3::HBox->new (0, 0);
2235 my $label = Gtk3::Label->new ("Password");
2236 $label->set_size_request (150, -1);
2237 $label->set_alignment (1, 0.5);
2238 $hbox1->pack_start ($label, 0, 0, 10);
2239 my $pwe1 = Gtk3::Entry->new ();
2240 $pwe1->set_visibility (0);
2241 $pwe1->set_size_request (200, -1);
2242 $hbox1->pack_start ($pwe1, 0, 0, 0);
2244 my $hbox2 = Gtk3::HBox->new (0, 0);
2245 $label = Gtk3::Label->new ("Confirm");
2246 $label->set_size_request (150, -1);
2247 $label->set_alignment (1, 0.5);
2248 $hbox2->pack_start ($label, 0, 0, 10);
2249 my $pwe2 = Gtk3::Entry->new ();
2250 $pwe2->set_visibility (0);
2251 $pwe2->set_size_request (200, -1);
2252 $hbox2->pack_start ($pwe2, 0, 0, 0);
2254 my $hbox3 = Gtk3::HBox->new (0, 0);
2255 $label = Gtk3::Label->new ("E-Mail");
2256 $label->set_size_request (150, -1);
2257 $label->set_alignment (1, 0.5);
2258 $hbox3->pack_start ($label, 0, 0, 10);
2259 my $eme = Gtk3::Entry->new ();
2260 $eme->set_size_request (200, -1);
2261 $eme->set_text('mail@example.invalid');
2262 $hbox3->pack_start ($eme, 0, 0, 0);
2265 $vbox->pack_start ($hbox1, 0, 0, 5);
2266 $vbox->pack_start ($hbox2, 0, 0, 5);
2267 $vbox->pack_start ($hbox3, 0, 0, 15);
2271 display_html ("passwd.htm");
2273 set_next (undef, sub {
2275 my $t1 = $pwe1->get_text;
2276 my $t2 = $pwe2->get_text;
2278 if (length ($t1) < 5) {
2279 display_message ("Password is too short.");
2280 $pwe1->grab_focus();
2285 display_message ("Password does not match.");
2286 $pwe1->grab_focus();
2290 my $t3 = $eme->get_text;
2291 if ($t3 !~ m/^\S+\@\S+\.\S+$/) {
2292 display_message ("E-Mail does not look like a valid address" .
2293 " (user\@domain.tld)");
2298 if ($t3 eq 'mail@example.invalid') {
2299 display_message ("Please enter a valid E-Mail address");
2307 create_ipconf_view();
2310 $pwe1->grab_focus();
2314 sub create_country_view {
2318 my $countryhash = $cmap->{countryhash};
2319 my $ctr = $cmap->{country};
2321 my $vbox2 = Gtk3::VBox->new (0, 0);
2322 $inbox->pack_start ($vbox2, 1, 0, 0);
2323 my $vbox = Gtk3::VBox->new (0, 0);
2324 $vbox2->pack_start ($vbox, 0, 0, 10);
2326 my $w = Gtk3::Entry->new ();
2327 $w->set_size_request (200, -1);
2329 my $c = Gtk3::EntryCompletion->new ();
2330 $c->set_text_column (0);
2331 $c->set_minimum_key_length(0);
2332 $c->set_popup_set_width (1);
2333 $c->set_inline_completion (1);
2335 my $hbox2 = Gtk3::HBox->new (0, 0);
2336 my $label = Gtk3::Label->new ("Time zone");
2337 $label->set_size_request (150, -1);
2338 $label->set_alignment (1, 0.5);
2339 $hbox2->pack_start ($label, 0, 0, 10);
2340 update_zonelist ($hbox2);
2342 my $hbox3 = Gtk3::HBox->new (0, 0);
2343 $label = Gtk3::Label->new ("Keyboard Layout");
2344 $label->set_size_request (150, -1);
2345 $label->set_alignment (1, 0.5);
2346 $hbox3->pack_start ($label, 0, 0, 10);
2348 my $kmapcb = Gtk3::ComboBoxText->new();
2349 $kmapcb->set_size_request (200, -1);
2350 foreach my $layout (sort keys %{$cmap->{kmaphash}}) {
2351 $kmapcb->append_text ($layout);
2354 update_layout ($kmapcb);
2355 $hbox3->pack_start ($kmapcb, 0, 0, 0);
2357 $kmapcb->signal_connect ('changed' => sub {
2358 my $sel = $kmapcb->get_active_text();
2359 if (my $kmap = $cmap->{kmaphash}->{$sel}) {
2360 my $xkmap = $cmap->{kmap}->{$kmap}->{x11};
2361 my $xvar = $cmap->{kmap}->{$kmap}->{x11var};
2362 syscmd ("setxkbmap $xkmap $xvar") if !$opt_testmode;
2367 $w->signal_connect ('changed' => sub {
2368 my ($entry, $event) = @_;
2369 my $text = $entry->get_text;
2371 if (my $cc = $countryhash->{lc($text)}) {
2372 update_zonelist ($hbox2, $cc);
2373 my $kmap = $ctr->{$cc}->{kmap} || 'en-us';
2374 update_layout ($kmapcb, $kmap);
2378 $w->signal_connect (key_press_event => sub {
2379 my ($entry, $event) = @_;
2380 my $text = $entry->get_text;
2382 my $val = $event->get_keyval;
2384 if ($val == Gtk3::Gdk::KEY_Tab) {
2385 my $cc = $countryhash->{lc($text)};
2392 $compl = $ctr->{$cc}->{name};
2394 foreach my $cc (keys %$ctr) {
2395 my $ct = $ctr->{$cc}->{name};
2396 if ($ct =~ m/^\Q$text\E.*$/i) {
2405 $entry->set_text($compl);
2410 print chr(7); # beep ?
2415 my $buf = $w->get_buffer();
2416 $buf->insert_text(-1, '', -1); # popup selection
2424 my $ls = Gtk3::ListStore->new('Glib::String');
2425 foreach my $cc (sort {$ctr->{$a}->{name} cmp $ctr->{$b}->{name} } keys %$ctr) {
2426 my $iter = $ls->append();
2427 $ls->set ($iter, 0, $ctr->{$cc}->{name});
2429 $c->set_model ($ls);
2431 $w->set_completion ($c);
2433 my $hbox = Gtk3::HBox->new (0, 0);
2435 $label = Gtk3::Label->new ("Country");
2436 $label->set_alignment (1, 0.5);
2437 $label->set_size_request (150, -1);
2438 $hbox->pack_start ($label, 0, 0, 10);
2439 $hbox->pack_start ($w, 0, 0, 0);
2441 $vbox->pack_start ($hbox, 0, 0, 5);
2442 $vbox->pack_start ($hbox2, 0, 0, 5);
2443 $vbox->pack_start ($hbox3, 0, 0, 5);
2445 if ($country && $ctr->{$country}) {
2446 $w->set_text ($ctr->{$country}->{name});
2451 display_html ("country.htm");
2452 set_next (undef, sub {
2454 my $text = $w->get_text;
2456 if (my $cc = $countryhash->{lc($text)}) {
2458 create_password_view();
2461 display_message ("Please select a country first.");
2469 my $target_hd_combo;
2470 my $target_hd_label;
2472 my $hdopion_first_setup = 1;
2474 my $create_basic_grid = sub {
2475 my $grid = Gtk3::Grid->new();
2476 $grid->set_visible(1);
2477 $grid->set_column_spacing(10);
2478 $grid->set_row_spacing(10);
2479 $grid->set_hexpand(1);
2481 $grid->set_margin_start(5);
2482 $grid->set_margin_end(5);
2483 $grid->set_margin_top(5);
2484 $grid->set_margin_bottom(5);
2489 my $create_label_widget_grid = sub {
2490 my ($labeled_widgets) = @_;
2492 my $grid = &$create_basic_grid();
2495 for (my $i = 0; $i < @$labeled_widgets; $i += 2) {
2496 my $widget = @$labeled_widgets[$i+1];
2497 my $label = Gtk3::Label->new(@$labeled_widgets[$i]);
2498 $label->set_visible(1);
2499 $label->set_alignment (1, 0.5);
2500 $grid->attach($label, 0, $row, 1, 1);
2501 $widget->set_visible(1);
2502 $grid->attach($widget, 1, $row, 1, 1);
2509 my $create_raid_disk_grid = sub {
2510 my $disk_labeled_widgets = [];
2511 for (my $i = 0; $i < @$hds; $i++) {
2512 my $disk_selector = Gtk3::ComboBoxText->new();
2513 $disk_selector->append_text("-- do not use --");
2514 $disk_selector->set_active(0);
2515 $disk_selector->set_visible(1);
2516 foreach my $hd (@$hds) {
2517 my ($disk, $devname, $size, $model) = @$hd;
2518 $disk_selector->append_text(get_device_desc ($devname, $size, $model));
2519 $disk_selector->{pve_disk_id} = $i;
2520 $disk_selector->signal_connect (changed => sub {
2522 my $diskid = $w->{pve_disk_id};
2523 my $a = $w->get_active - 1;
2524 $config_options->{"disksel${diskid}"} = ($a >= 0) ? $hds->[$a] : undef;
2528 if ($hdopion_first_setup) {
2529 $disk_selector->set_active ($i+1) if $hds->[$i];
2532 if (my $cur_hd = $config_options->{"disksel$i"}) {
2533 foreach my $hd (@$hds) {
2534 if (@$hd[1] eq @$cur_hd[1]) {
2535 $disk_selector->set_active($hdind+1);
2543 push @$disk_labeled_widgets, "Harddisk $i", $disk_selector;
2546 my $scrolled_window = Gtk3::ScrolledWindow->new();
2547 $scrolled_window->set_hexpand(1);
2548 $scrolled_window->set_propagate_natural_height(1) if @$hds > 4;
2549 $scrolled_window->add(&$create_label_widget_grid($disk_labeled_widgets));
2550 $scrolled_window->set_policy('never', 'automatic');
2552 return $scrolled_window;
2553 # &$create_label_widget_grid($disk_labeled_widgets)
2556 my $create_raid_advanced_grid = sub {
2557 my $labeled_widgets = [];
2558 my $spinbutton_ashift = Gtk3::SpinButton->new_with_range(9,13,1);
2559 $spinbutton_ashift->set_tooltip_text("zpool ashift property (pool sector size, default 2^12)");
2560 $spinbutton_ashift->signal_connect ("value-changed" => sub {
2562 $config_options->{ashift} = $w->get_value_as_int();
2564 $config_options->{ashift} = 12 if ! defined($config_options->{ashift});
2565 $spinbutton_ashift->set_value($config_options->{ashift});
2566 push @$labeled_widgets, "ashift";
2567 push @$labeled_widgets, $spinbutton_ashift;
2569 my $combo_compress = Gtk3::ComboBoxText->new();
2570 $combo_compress->set_tooltip_text("zfs compression algorithm for rpool dataset");
2571 # note: gzip / lze not allowed for bootfs vdevs
2572 my $comp_opts = ["on","off","lzjb","lz4"];
2573 foreach my $opt (@$comp_opts) {
2574 $combo_compress->append($opt, $opt);
2576 $config_options->{compress} = "on" if !defined($config_options->{compress});
2577 $combo_compress->set_active_id($config_options->{compress});
2578 $combo_compress->signal_connect (changed => sub {
2580 $config_options->{compress} = $w->get_active_text();
2582 push @$labeled_widgets, "compress";
2583 push @$labeled_widgets, $combo_compress;
2585 my $combo_checksum = Gtk3::ComboBoxText->new();
2586 $combo_checksum->set_tooltip_text("zfs checksum algorithm for rpool dataset");
2587 my $csum_opts = ["on", "off","fletcher2", "fletcher4", "sha256"];
2588 foreach my $opt (@$csum_opts) {
2589 $combo_checksum->append($opt, $opt);
2591 $config_options->{checksum} = "on" if !($config_options->{checksum});
2592 $combo_checksum->set_active_id($config_options->{checksum});
2593 $combo_checksum->signal_connect (changed => sub {
2595 $config_options->{checksum} = $w->get_active_text();
2597 push @$labeled_widgets, "checksum";
2598 push @$labeled_widgets, $combo_checksum;
2600 my $spinbutton_copies = Gtk3::SpinButton->new_with_range(1,3,1);
2601 $spinbutton_copies->set_tooltip_text("zfs copies property for rpool dataset (in addition to RAID redundancy!)");
2602 $spinbutton_copies->signal_connect ("value-changed" => sub {
2604 $config_options->{copies} = $w->get_value_as_int();
2606 $config_options->{copies} = 1 if !defined($config_options->{copies});
2607 $spinbutton_copies->set_value($config_options->{copies});
2608 push @$labeled_widgets, "copies", $spinbutton_copies;
2610 return &$create_label_widget_grid($labeled_widgets);;
2613 sub create_hdoption_view {
2615 my $dialog = Gtk3::Dialog->new();
2617 $dialog->set_title("Harddisk options");
2619 $dialog->add_button("_OK", 1);
2621 my $contarea = $dialog->get_content_area();
2623 my $hbox2 = Gtk3::Box->new('horizontal', 0);
2624 $contarea->pack_start($hbox2, 1, 1, 10);
2626 my $grid = Gtk3::Grid->new();
2627 $grid->set_column_spacing(10);
2628 $grid->set_row_spacing(10);
2630 $hbox2->pack_start($grid, 1, 0, 10);
2636 my $label0 = Gtk3::Label->new ("Filesystem");
2637 $label0->set_alignment (1, 0.5);
2638 $grid->attach($label0, 0, $row, 1, 1);
2640 my $fstypecb = Gtk3::ComboBoxText->new();
2642 my $fstype = ['ext3', 'ext4', 'xfs',
2643 'zfs (RAID0)', 'zfs (RAID1)',
2644 'zfs (RAID10)', 'zfs (RAIDZ-1)',
2645 'zfs (RAIDZ-2)', 'zfs (RAIDZ-3)'];
2647 push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
2648 if $setup->{enable_btrfs};
2651 foreach my $tmp (@$fstype) {
2652 $fstypecb->append_text($tmp);
2653 $fstypecb->set_active ($tcount)
2654 if $config_options->{filesys} eq $tmp;
2658 $grid->attach($fstypecb, 1, $row, 1, 1);
2664 my $sep = Gtk3::HSeparator->new();
2665 $sep->set_visible(1);
2666 $grid->attach($sep, 0, $row, 2, 1);
2669 my $hdsize_labeled_widgets = [];
2673 if ( -b $target_hd) {
2674 $hdsize = int(hd_size ($target_hd) / (1024*1024.0)); # size in GB
2675 } elsif ($target_hd) {
2676 $hdsize = int((-s $target_hd) / (1024*1024*1024.0));
2679 my $hdsize_size_adj = Gtk3::Adjustment->new($config_options->{hdsize} || $hdsize, 0, $hdsize+1, 1, 1, 1);
2680 my $spinbutton_hdsize = Gtk3::SpinButton->new($hdsize_size_adj, 1, 1);
2681 $spinbutton_hdsize->set_tooltip_text("only use specified size (GB) of the harddisk (rest left unpartitioned)");
2682 push @$hdsize_labeled_widgets, "hdsize", $spinbutton_hdsize;
2684 my $entry_swapsize = Gtk3::Entry->new();
2685 $entry_swapsize->set_tooltip_text("maximum SWAP size (GB)");
2686 $entry_swapsize->signal_connect (key_press_event => \&check_float);
2687 $entry_swapsize->set_text($config_options->{swapsize}) if $config_options->{swapsize};
2688 push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
2690 my $entry_maxroot = Gtk3::Entry->new();
2691 if ($setup->{product} eq 'pve') {
2692 $entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
2693 $entry_maxroot->signal_connect (key_press_event => \&check_float);
2694 $entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
2695 push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
2698 my $entry_minfree = Gtk3::Entry->new();
2699 $entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
2700 $entry_minfree->signal_connect (key_press_event => \&check_float);
2701 $entry_minfree->set_text($config_options->{minfree}) if $config_options->{minfree};
2702 push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
2705 if ($setup->{product} eq 'pve') {
2706 $entry_maxvz = Gtk3::Entry->new();
2707 $entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
2708 $entry_maxvz->signal_connect (key_press_event => \&check_float);
2709 $entry_maxvz->set_text($config_options->{maxvz}) if $config_options->{maxvz};
2710 push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
2713 my $options_stack = Gtk3::Stack->new();
2714 $options_stack->set_visible(1);
2715 $options_stack->set_hexpand(1);
2716 $options_stack->set_vexpand(1);
2717 $options_stack->add_titled(&$create_raid_disk_grid(), "raiddisk", "Disk Setup");
2718 $options_stack->add_titled(&$create_label_widget_grid($hdsize_labeled_widgets), "hdsize", "Size Options");
2719 $options_stack->add_titled(&$create_raid_advanced_grid("zfs"), "raidzfsadvanced", "Advanced Options");
2720 $options_stack->set_visible_child_name("raiddisk");
2721 my $options_stack_switcher = Gtk3::StackSwitcher->new();
2722 $options_stack_switcher->set_halign('center');
2723 $options_stack_switcher->set_stack($options_stack);
2724 $grid->attach($options_stack_switcher, 0, $row, 2, 1);
2726 $grid->attach($options_stack, 0, $row, 2, 1);
2729 $hdopion_first_setup = 0;
2731 my $switch_view = sub {
2732 my $raid = $config_options->{filesys} =~ m/zfs|btrfs/;
2733 my $enable_zfs_opts = $config_options->{filesys} =~ m/zfs/;
2735 $target_hd_combo->set_visible(!$raid);
2736 $options_stack->get_child_by_name("hdsize")->set_visible(!$raid);
2737 $options_stack->get_child_by_name("raiddisk")->set_visible($raid);
2738 $options_stack_switcher->set_visible($enable_zfs_opts);
2739 $options_stack->get_child_by_name("raidzfsadvanced")->set_visible($enable_zfs_opts);
2741 $target_hd_label->set_text("Target: $config_options->{filesys} ");
2742 $options_stack->set_visible_child_name("raiddisk");
2744 $target_hd_label->set_text("Target Harddisk: ");
2746 my (undef, $pref_width) = $dialog->get_preferred_width();
2747 my (undef, $pref_height) = $dialog->get_preferred_height();
2748 $pref_height = 750 if $pref_height > 750;
2749 $dialog->resize($pref_width, $pref_height);
2754 $fstypecb->signal_connect (changed => sub {
2755 $config_options->{filesys} = $fstypecb->get_active_text();
2763 my $get_float = sub {
2766 my $text = $entry->get_text();
2767 return undef if !defined($text);
2772 return undef if $text !~ m/^\d+(\.\d+)?$/;
2779 if (($tmp = &$get_float($spinbutton_hdsize)) && ($tmp != $hdsize)) {
2780 $config_options->{hdsize} = $tmp;
2782 delete $config_options->{hdsize};
2785 if (defined($tmp = &$get_float($entry_swapsize))) {
2786 $config_options->{swapsize} = $tmp;
2788 delete $config_options->{swapsize};
2791 if (defined($tmp = &$get_float($entry_maxroot))) {
2792 $config_options->{maxroot} = $tmp;
2794 delete $config_options->{maxroot};
2797 if (defined($tmp = &$get_float($entry_minfree))) {
2798 $config_options->{minfree} = $tmp;
2800 delete $config_options->{minfree};
2803 if ($entry_maxvz && defined($tmp = &$get_float($entry_maxvz))) {
2804 $config_options->{maxvz} = $tmp;
2806 delete $config_options->{maxvz};
2812 my $get_raid_devlist = sub {
2814 my $dev_name_hash = {};
2817 for (my $i = 0; $i < @$hds; $i++) {
2818 if (my $hd = $config_options->{"disksel$i"}) {
2819 my ($disk, $devname, $size, $model) = @$hd;
2820 die "device '$devname' is used more than once\n"
2821 if $dev_name_hash->{$devname};
2822 $dev_name_hash->{$devname} = $hd;
2823 push @$devlist, $hd;
2830 sub zfs_mirror_size_check {
2831 my ($expected, $actual) = @_;
2833 die "mirrored disks must have same size\n"
2834 if abs($expected - $actual) > $expected / 10;
2837 sub get_zfs_raid_setup {
2839 my $filesys = $config_options->{filesys};
2841 my $devlist = &$get_raid_devlist();
2843 my $diskcount = scalar(@$devlist);
2844 die "$filesys needs at least one device\n" if $diskcount < 1;
2846 my $bootdevlist = [];
2849 if ($filesys eq 'zfs (RAID0)') {
2850 push @$bootdevlist, @$devlist[0];
2851 foreach my $hd (@$devlist) {
2854 } elsif ($filesys eq 'zfs (RAID1)') {
2855 die "zfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
2857 my $hd = @$devlist[0];
2858 my $expected_size = @$hd[2]; # all disks need approximately same size
2859 foreach $hd (@$devlist) {
2860 zfs_mirror_size_check($expected_size, @$hd[2]);
2862 push @$bootdevlist, $hd;
2864 } elsif ($filesys eq 'zfs (RAID10)') {
2865 die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
2866 die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
2868 push @$bootdevlist, @$devlist[0], @$devlist[1];
2870 for (my $i = 0; $i < $diskcount; $i+=2) {
2871 my $hd1 = @$devlist[$i];
2872 my $hd2 = @$devlist[$i+1];
2873 zfs_mirror_size_check(@$hd1[2], @$hd2[2]); # pairs need approximately same size
2874 $cmd .= ' mirror ' . @$hd1[1] . ' ' . @$hd2[1];
2877 } elsif ($filesys =~ m/^zfs \(RAIDZ-([123])\)$/) {
2879 my $mindisks = 2 + $level;
2880 die "zfs (RAIDZ-$level) needs at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
2881 my $hd = @$devlist[0];
2882 my $expected_size = @$hd[2]; # all disks need approximately same size
2883 $cmd .= " raidz$level";
2884 foreach $hd (@$devlist) {
2885 zfs_mirror_size_check($expected_size, @$hd[2]);
2887 push @$bootdevlist, $hd;
2890 die "unknown zfs mode '$filesys'\n";
2893 return ($devlist, $bootdevlist, $cmd);
2896 sub get_btrfs_raid_setup {
2898 my $filesys = $config_options->{filesys};
2900 my $devlist = &$get_raid_devlist();
2902 my $diskcount = scalar(@$devlist);
2903 die "$filesys needs at least one device\n" if $diskcount < 1;
2907 if ($diskcount == 1) {
2910 if ($filesys eq 'btrfs (RAID0)') {
2912 } elsif ($filesys eq 'btrfs (RAID1)') {
2913 die "btrfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
2915 } elsif ($filesys eq 'btrfs (RAID10)') {
2916 die "btrfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
2919 die "unknown btrfs mode '$filesys'\n";
2923 return ($devlist, $mode);
2926 sub create_hdsel_view {
2930 my $vbox = Gtk3::VBox->new (0, 0);
2931 $inbox->pack_start ($vbox, 1, 0, 0);
2932 my $hbox = Gtk3::HBox->new (0, 0);
2933 $vbox->pack_start ($hbox, 0, 0, 10);
2935 my ($disk, $devname, $size, $model) = @{@$hds[0]};
2936 $target_hd = $devname;
2938 $target_hd_label = Gtk3::Label->new ("Target Harddisk: ");
2939 $hbox->pack_start ($target_hd_label, 0, 0, 0);
2941 $target_hd_combo = Gtk3::ComboBoxText->new();
2943 foreach my $hd (@$hds) {
2944 ($disk, $devname, $size, $model) = @$hd;
2945 $target_hd_combo->append_text (get_device_desc ($devname, $size, $model));
2948 $target_hd_combo->set_active (0);
2949 $target_hd_combo->signal_connect (changed => sub {
2950 $a = shift->get_active;
2951 my ($disk, $devname) = @{@$hds[$a]};
2952 $target_hd = $devname;
2955 $hbox->pack_start ($target_hd_combo, 0, 0, 10);
2957 my $options = Gtk3::Button->new ('_Options');
2958 $options->signal_connect (clicked => \&create_hdoption_view);
2959 $hbox->pack_start ($options, 0, 0, 0);
2964 display_html ("page1.htm");
2966 set_next (undef, sub {
2968 if ($config_options->{filesys} =~ m/zfs/) {
2969 eval { get_zfs_raid_setup(); };
2971 display_message ("Warning: $err\n" .
2972 "Please fix ZFS setup first.");
2974 create_country_view();
2976 } elsif ($config_options->{filesys} =~ m/btrfs/) {
2977 eval { get_btrfs_raid_setup(); };
2979 display_message ("Warning: $err\n" .
2980 "Please fix BTRFS setup first.");
2982 create_country_view();
2985 create_country_view();
2990 sub create_extract_view {
2996 $next->set_sensitive (0);
2998 my $vbox = Gtk3::VBox->new (0, 0);
2999 $inbox->pack_start ($vbox, 1, 0, 0);
3000 my $hbox = Gtk3::HBox->new (0, 0);
3001 $vbox->pack_start ($hbox, 0, 0, 10);
3003 my $vbox2 = Gtk3::VBox->new (0, 0);
3004 $hbox->pack_start ($vbox2, 0, 0, 0);
3006 $progress_status = Gtk3::Label->new ('');
3007 $vbox2->pack_start ($progress_status, 1, 1, 0);
3009 $progress = Gtk3::ProgressBar->new;
3010 $progress->set_show_text(1);
3011 $progress->set_size_request (600, -1);
3013 $vbox2->pack_start ($progress, 0, 0, 0);
3017 my $tdir = $opt_testmode ? "target" : "/target";
3019 my $base = "${proxmox_cddir}/$setup->{product}-base.squashfs";
3021 eval { extract_data ($base, $tdir); };
3024 $next->set_sensitive (1);
3026 set_next ("_Reboot", sub { exit (0); } );
3029 display_html ("fail.htm");
3030 display_error ($err);
3033 display_html ("success.htm");
3037 sub create_intro_view {
3041 if ($setup->{product} eq 'pve') {
3043 my $cpuinfo = file_get_contents('/proc/cpuinfo');
3044 if ($cpuinfo && !($cpuinfo =~ /^flags\s*:.*(vmx|svm)/m)) {
3045 display_error("No support for KVM virtualisation detected.\n\n" .
3046 "Check BIOS settings for Intel VT / AMD-V / SVM.")
3051 display_html ("license.htm");
3053 set_next ("I a_gree", \&create_hdsel_view);
3056 $ipconf = get_ip_config ();
3058 $country = detect_country() if $ipconf->{default} || $opt_testmode;
3060 # read country, kmap and timezone infos
3061 $cmap = read_cmap ();
3063 if (!defined($cmap->{country}->{$country})) {
3064 print $logfd "ignoring detected country '$country', invalid or unknown\n";
3068 create_main_window ();
3070 my $initial_error = 0;
3072 if (!defined ($hds) || (scalar (@$hds) <= 0)) {
3073 print "no hardisks found\n";
3075 display_html ("nohds.htm");
3076 set_next ("Reboot", sub { exit (0); } );
3078 foreach my $hd (@$hds) {
3079 my ($disk, $devname) = @$hd;
3080 next if $devname =~ m|^/dev/md\d+$|;
3081 print "found Disk$disk N:$devname\n";
3085 if (!$initial_error && (scalar keys %{ $ipconf->{ifaces} } == 0)) {
3086 print "no network interfaces found\n";
3088 display_html ("nonics.htm");
3089 set_next ("Reboot", sub { exit (0); } );
3092 create_intro_view () if !$initial_error;