remove unused patches

Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>

diff --git a/patches/intel/e1000e/e1000e_4.10_max-mtu.patch b/patches/intel/e1000e/e1000e_4.10_max-mtu.patch
deleted file mode 100644 (file)
index 69272d7..0000000
--- a/patches/intel/e1000e/e1000e_4.10_max-mtu.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-diff --git a/src/netdev.c b/src/netdev.c
-index 73b0f9a..aef1bc2 100644
---- a/src/netdev.c
-+++ b/src/netdev.c
-@@ -6724,19 +6724,12 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
-       int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- 
-       /* Jumbo frame support */
--      if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) &&
-+      if ((new_mtu > ETH_DATA_LEN) &&
-           !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-               e_err("Jumbo Frames not supported.\n");
-               return -EINVAL;
-       }
- 
--      /* Supported frame sizes */
--      if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) ||
--          (max_frame > adapter->max_hw_frame_size)) {
--              e_err("Unsupported MTU setting\n");
--              return -EINVAL;
--      }
--
-       /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
-       if ((adapter->hw.mac.type >= e1000_pch2lan) &&
-           !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
-@@ -8262,6 +8255,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
- #endif /* HAVE_NETDEV_VLAN_FEATURES */
-       }
- 
-+      /* MTU range: 68 - max_hw_frame_size */
-+      netdev->min_mtu = ETH_MIN_MTU;
-+      netdev->max_mtu = adapter->max_hw_frame_size -
-+                        (VLAN_ETH_HLEN + ETH_FCS_LEN);
-+
-       if (e1000e_enable_mng_pass_thru(&adapter->hw))
-               adapter->flags |= FLAG_MNG_PT_ENABLED;
- 

diff --git a/patches/intel/e1000e/e1000e_4.15-new-timer.patch b/patches/intel/e1000e/e1000e_4.15-new-timer.patch
deleted file mode 100644 (file)
index 1583aa1..0000000
--- a/patches/intel/e1000e/e1000e_4.15-new-timer.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Thomas Lamprecht <t.lamprecht@proxmox.com>
-Date: Tue, 5 Jun 2018 11:16:29 +0200
-Subject: [PATCH] port to new internal kernel timer API
-
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
-diff --git a/src/netdev.c b/src/netdev.c
---- a/src/netdev.c
-+++ b/src/netdev.c
-@@ -5389,9 +5389,10 @@
-  * Need to wait a few seconds after link up to get diagnostic information from
-  * the phy
-  **/
--static void e1000_update_phy_info(unsigned long data)
-+static void e1000_update_phy_info(struct timer_list *t)
- {
--      struct e1000_adapter *adapter = (struct e1000_adapter *)data;
-+      struct e1000_adapter *adapter;
-+      adapter = from_timer(adapter, t, phy_info_timer);
- 
-       if (test_bit(__E1000_DOWN, &adapter->state))
-               return;
-@@ -5774,9 +5775,10 @@
-  * e1000_watchdog - Timer Call-back
-  * @data: pointer to adapter cast into an unsigned long
-  **/
--static void e1000_watchdog(unsigned long data)
-+static void e1000_watchdog(struct timer_list *t)
- {
--      struct e1000_adapter *adapter = (struct e1000_adapter *)data;
-+      struct e1000_adapter *adapter;
-+      adapter = from_timer(adapter, t, watchdog_timer);
- 
-       /* Do the rest outside of interrupt context */
-       schedule_work(&adapter->watchdog_task);
-@@ -8348,13 +8348,9 @@
-               goto err_eeprom;
-       }
- 
--      init_timer(&adapter->watchdog_timer);
--      adapter->watchdog_timer.function = e1000_watchdog;
--      adapter->watchdog_timer.data = (unsigned long)adapter;
--
--      init_timer(&adapter->phy_info_timer);
--      adapter->phy_info_timer.function = e1000_update_phy_info;
--      adapter->phy_info_timer.data = (unsigned long)adapter;
-+      timer_setup(&adapter->watchdog_timer, e1000_watchdog, 0);
-+
-+      timer_setup(&adapter->phy_info_timer, e1000_update_phy_info, 0);
- 
-       INIT_WORK(&adapter->reset_task, e1000_reset_task);
-       INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);

diff --git a/patches/intel/igb/igb_4.15_mtu.patch b/patches/intel/igb/igb_4.15_mtu.patch
deleted file mode 100644 (file)
index 522cf08..0000000
--- a/patches/intel/igb/igb_4.15_mtu.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff --git a/src/igb_main.c.orig b/src/igb_main.c
-index 3ee1ec7..c8adf04 100644
---- a/src/igb_main.c.orig
-+++ b/src/igb_main.c
-@@ -5888,10 +5888,8 @@ static int igb_change_mtu(struct net_dev
-       while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
-               usleep_range(1000, 2000);
- 
--#ifndef HAVE_NETDEVICE_MIN_MAX_MTU
-       /* igb_down has a dependency on max_frame_size */
-       adapter->max_frame_size = max_frame;
--#endif
- 
-       if (netif_running(netdev))
-               igb_down(adapter);

diff --git a/patches/intel/intel-module-gcc6-compat.patch b/patches/intel/intel-module-gcc6-compat.patch
deleted file mode 100644 (file)
index 9ccd2c5..0000000
--- a/patches/intel/intel-module-gcc6-compat.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-diff --git a/src/Makefile.orig b/src/Makefile
-index 8e962f7..50bcdcc 100644
---- a/src/Makefile.orig
-+++ b/src/Makefile
-@@ -123,6 +123,13 @@ ifeq (,$(CC))
-   $(error Compiler not found)
- endif
- 
-+# workaround for GCC6's default PIE
-+ifeq ($(CC),gcc)
-+  PIE_TEST = [ -z "`$(CC) -fno-PIE -no-pie -x c -c /dev/null -o /dev/null 2>&1`" ]
-+  PIE_FLAGS := $(shell $(PIE_TEST) && echo '-fno-PIE -no-pie')
-+  EXTRA_CFLAGS += $(PIE_FLAGS)
-+endif
-+
- # we need to know what platform the driver is being built on
- # some additional features are only built on Intel platforms
- ARCH := $(shell uname -m | sed 's/i.86/i386/')