[qemu.git] / hw / ssi-sd.c

/*
 * SSI to SD card adapter.
 *
 * Copyright (c) 2007-2009 CodeSourcery.
 * Written by Paul Brook
 *
 * This code is licensed under the GNU GPL v2.
 *
 * Contributions after 2012-01-13 are licensed under the terms of the
 * GNU GPL, version 2 or (at your option) any later version.
 */

#include "blockdev.h"
#include "ssi.h"
#include "sd.h"

//#define DEBUG_SSI_SD 1

#ifdef DEBUG_SSI_SD
#define DPRINTF(fmt, ...) \
do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0)
#define BADF(fmt, ...) \
do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
#else
#define DPRINTF(fmt, ...) do {} while(0)
#define BADF(fmt, ...) \
do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0)
#endif

typedef enum {
    SSI_SD_CMD,
    SSI_SD_CMDARG,
    SSI_SD_RESPONSE,
    SSI_SD_DATA_START,
    SSI_SD_DATA_READ,
} ssi_sd_mode;

typedef struct {
    SSISlave ssidev;
    ssi_sd_mode mode;
    int cmd;
    uint8_t cmdarg[4];
    uint8_t response[5];
    int arglen;
    int response_pos;
    int stopping;
    SDState *sd;
} ssi_sd_state;

/* State word bits.  */
#define SSI_SDR_LOCKED          0x0001
#define SSI_SDR_WP_ERASE        0x0002
#define SSI_SDR_ERROR           0x0004
#define SSI_SDR_CC_ERROR        0x0008
#define SSI_SDR_ECC_FAILED      0x0010
#define SSI_SDR_WP_VIOLATION    0x0020
#define SSI_SDR_ERASE_PARAM     0x0040
#define SSI_SDR_OUT_OF_RANGE    0x0080
#define SSI_SDR_IDLE            0x0100
#define SSI_SDR_ERASE_RESET     0x0200
#define SSI_SDR_ILLEGAL_COMMAND 0x0400
#define SSI_SDR_COM_CRC_ERROR   0x0800
#define SSI_SDR_ERASE_SEQ_ERROR 0x1000
#define SSI_SDR_ADDRESS_ERROR   0x2000
#define SSI_SDR_PARAMETER_ERROR 0x4000

static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
{
    ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);

    /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data.  */
    if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
        s->mode = SSI_SD_CMD;
        /* There must be at least one byte delay before the card responds.  */
        s->stopping = 1;
    }

    switch (s->mode) {
    case SSI_SD_CMD:
        if (val == 0xff) {
            DPRINTF("NULL command\n");
            return 0xff;
        }
        s->cmd = val & 0x3f;
        s->mode = SSI_SD_CMDARG;
        s->arglen = 0;
        return 0xff;
    case SSI_SD_CMDARG:
        if (s->arglen == 4) {
            SDRequest request;
            uint8_t longresp[16];
            /* FIXME: Check CRC.  */
            request.cmd = s->cmd;
            request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16)
                           | (s->cmdarg[2] << 8) | s->cmdarg[3];
            DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
            s->arglen = sd_do_command(s->sd, &request, longresp);
            if (s->arglen <= 0) {
                s->arglen = 1;
                s->response[0] = 4;
                DPRINTF("SD command failed\n");
            } else if (s->cmd == 58) {
                /* CMD58 returns R3 response (OCR)  */
                DPRINTF("Returned OCR\n");
                s->arglen = 5;
                s->response[0] = 1;
                memcpy(&s->response[1], longresp, 4);
            } else if (s->arglen != 4) {
                BADF("Unexpected response to cmd %d\n", s->cmd);
                /* Illegal command is about as near as we can get.  */
                s->arglen = 1;
                s->response[0] = 4;
            } else {
                /* All other commands return status.  */
                uint32_t cardstatus;
                uint16_t status;
                /* CMD13 returns a 2-byte statuse work. Other commands
                   only return the first byte.  */
                s->arglen = (s->cmd == 13) ? 2 : 1;
                cardstatus = (longresp[0] << 24) | (longresp[1] << 16)
                             | (longresp[2] << 8) | longresp[3];
                status = 0;
                if (((cardstatus >> 9) & 0xf) < 4)
                    status |= SSI_SDR_IDLE;
                if (cardstatus & ERASE_RESET)
                    status |= SSI_SDR_ERASE_RESET;
                if (cardstatus & ILLEGAL_COMMAND)
                    status |= SSI_SDR_ILLEGAL_COMMAND;
                if (cardstatus & COM_CRC_ERROR)
                    status |= SSI_SDR_COM_CRC_ERROR;
                if (cardstatus & ERASE_SEQ_ERROR)
                    status |= SSI_SDR_ERASE_SEQ_ERROR;
                if (cardstatus & ADDRESS_ERROR)
                    status |= SSI_SDR_ADDRESS_ERROR;
                if (cardstatus & CARD_IS_LOCKED)
                    status |= SSI_SDR_LOCKED;
                if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP))
                    status |= SSI_SDR_WP_ERASE;
                if (cardstatus & SD_ERROR)
                    status |= SSI_SDR_ERROR;
                if (cardstatus & CC_ERROR)
                    status |= SSI_SDR_CC_ERROR;
                if (cardstatus & CARD_ECC_FAILED)
                    status |= SSI_SDR_ECC_FAILED;
                if (cardstatus & WP_VIOLATION)
                    status |= SSI_SDR_WP_VIOLATION;
                if (cardstatus & ERASE_PARAM)
                    status |= SSI_SDR_ERASE_PARAM;
                if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE))
                    status |= SSI_SDR_OUT_OF_RANGE;
                /* ??? Don't know what Parameter Error really means, so
                   assume it's set if the second byte is nonzero.  */
                if (status & 0xff)
                    status |= SSI_SDR_PARAMETER_ERROR;
                s->response[0] = status >> 8;
                s->response[1] = status;
                DPRINTF("Card status 0x%02x\n", status);
            }
            s->mode = SSI_SD_RESPONSE;
            s->response_pos = 0;
        } else {
            s->cmdarg[s->arglen++] = val;
        }
        return 0xff;
    case SSI_SD_RESPONSE:
        if (s->stopping) {
            s->stopping = 0;
            return 0xff;
        }
        if (s->response_pos < s->arglen) {
            DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
            return s->response[s->response_pos++];
        }
        if (sd_data_ready(s->sd)) {
            DPRINTF("Data read\n");
            s->mode = SSI_SD_DATA_START;
        } else {
            DPRINTF("End of command\n");
            s->mode = SSI_SD_CMD;
        }
        return 0xff;
    case SSI_SD_DATA_START:
        DPRINTF("Start read block\n");
        s->mode = SSI_SD_DATA_READ;
        return 0xfe;
    case SSI_SD_DATA_READ:
        val = sd_read_data(s->sd);
        if (!sd_data_ready(s->sd)) {
            DPRINTF("Data read end\n");
            s->mode = SSI_SD_CMD;
        }
        return val;
    }
    /* Should never happen.  */
    return 0xff;
}

static void ssi_sd_save(QEMUFile *f, void *opaque)
{
    ssi_sd_state *s = (ssi_sd_state *)opaque;
    int i;

    qemu_put_be32(f, s->mode);
    qemu_put_be32(f, s->cmd);
    for (i = 0; i < 4; i++)
        qemu_put_be32(f, s->cmdarg[i]);
    for (i = 0; i < 5; i++)
        qemu_put_be32(f, s->response[i]);
    qemu_put_be32(f, s->arglen);
    qemu_put_be32(f, s->response_pos);
    qemu_put_be32(f, s->stopping);
}

static int ssi_sd_load(QEMUFile *f, void *opaque, int version_id)
{
    ssi_sd_state *s = (ssi_sd_state *)opaque;
    int i;

    if (version_id != 1)
        return -EINVAL;

    s->mode = qemu_get_be32(f);
    s->cmd = qemu_get_be32(f);
    for (i = 0; i < 4; i++)
        s->cmdarg[i] = qemu_get_be32(f);
    for (i = 0; i < 5; i++)
        s->response[i] = qemu_get_be32(f);
    s->arglen = qemu_get_be32(f);
    s->response_pos = qemu_get_be32(f);
    s->stopping = qemu_get_be32(f);

    return 0;
}

static int ssi_sd_init(SSISlave *dev)
{
    ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);
    DriveInfo *dinfo;

    s->mode = SSI_SD_CMD;
    dinfo = drive_get_next(IF_SD);
    s->sd = sd_init(dinfo ? dinfo->bdrv : NULL, 1);
    register_savevm(&dev->qdev, "ssi_sd", -1, 1, ssi_sd_save, ssi_sd_load, s);
    return 0;
}

static SSISlaveInfo ssi_sd_info = {
    .qdev.name = "ssi-sd",
    .qdev.size = sizeof(ssi_sd_state),
    .init = ssi_sd_init,
    .transfer = ssi_sd_transfer
};

static void ssi_sd_register_devices(void)
{
    ssi_register_slave(&ssi_sd_info);
}

device_init(ssi_sd_register_devices)
Commit	Line	Data
775616c3 PB	1	/*
	2	* SSI to SD card adapter.
	3	*
5493e33f	4	* Copyright (c) 2007-2009 CodeSourcery.
775616c3 PB	5	* Written by Paul Brook
775616c3 PB	6	*
8e31bf38	7	* This code is licensed under the GNU GPL v2.
6b620ca3 PB	8	*
	9	* Contributions after 2012-01-13 are licensed under the terms of the
	10	* GNU GPL, version 2 or (at your option) any later version.
775616c3 PB	11	*/
775616c3 PB	12
13839974	13	#include "blockdev.h"
5493e33f	14	#include "ssi.h"
775616c3 PB	15	#include "sd.h"
	16
	17	//#define DEBUG_SSI_SD 1
	18
	19	#ifdef DEBUG_SSI_SD
001faf32 BS	20	#define DPRINTF(fmt, ...) \
	21	do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0)
	22	#define BADF(fmt, ...) \
	23	do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
775616c3	24	#else
001faf32 BS	25	#define DPRINTF(fmt, ...) do {} while(0)
	26	#define BADF(fmt, ...) \
	27	do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0)
775616c3 PB	28	#endif
	29
	30	typedef enum {
	31	SSI_SD_CMD,
	32	SSI_SD_CMDARG,
	33	SSI_SD_RESPONSE,
	34	SSI_SD_DATA_START,
	35	SSI_SD_DATA_READ,
	36	} ssi_sd_mode;
	37
	38	typedef struct {
5493e33f	39	SSISlave ssidev;
775616c3 PB	40	ssi_sd_mode mode;
	41	int cmd;
	42	uint8_t cmdarg[4];
	43	uint8_t response[5];
	44	int arglen;
	45	int response_pos;
	46	int stopping;
	47	SDState *sd;
	48	} ssi_sd_state;
	49
	50	/* State word bits. */
	51	#define SSI_SDR_LOCKED 0x0001
	52	#define SSI_SDR_WP_ERASE 0x0002
	53	#define SSI_SDR_ERROR 0x0004
	54	#define SSI_SDR_CC_ERROR 0x0008
	55	#define SSI_SDR_ECC_FAILED 0x0010
	56	#define SSI_SDR_WP_VIOLATION 0x0020
	57	#define SSI_SDR_ERASE_PARAM 0x0040
	58	#define SSI_SDR_OUT_OF_RANGE 0x0080
	59	#define SSI_SDR_IDLE 0x0100
	60	#define SSI_SDR_ERASE_RESET 0x0200
	61	#define SSI_SDR_ILLEGAL_COMMAND 0x0400
	62	#define SSI_SDR_COM_CRC_ERROR 0x0800
	63	#define SSI_SDR_ERASE_SEQ_ERROR 0x1000
	64	#define SSI_SDR_ADDRESS_ERROR 0x2000
	65	#define SSI_SDR_PARAMETER_ERROR 0x4000
	66
5493e33f	67	static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
775616c3	68	{
5493e33f	69	ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);
775616c3 PB	70
	71	/* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */
	72	if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
	73	s->mode = SSI_SD_CMD;
	74	/* There must be at least one byte delay before the card responds. */
	75	s->stopping = 1;
	76	}
	77
	78	switch (s->mode) {
	79	case SSI_SD_CMD:
	80	if (val == 0xff) {
	81	DPRINTF("NULL command\n");
	82	return 0xff;
	83	}
	84	s->cmd = val & 0x3f;
	85	s->mode = SSI_SD_CMDARG;
	86	s->arglen = 0;
	87	return 0xff;
	88	case SSI_SD_CMDARG:
	89	if (s->arglen == 4) {
bc24a225	90	SDRequest request;
775616c3 PB	91	uint8_t longresp[16];
	92	/* FIXME: Check CRC. */
	93	request.cmd = s->cmd;
	94	request.arg = (s->cmdarg[0] << 24) \| (s->cmdarg[1] << 16)
	95	\| (s->cmdarg[2] << 8) \| s->cmdarg[3];
	96	DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
	97	s->arglen = sd_do_command(s->sd, &request, longresp);
	98	if (s->arglen <= 0) {
	99	s->arglen = 1;
	100	s->response[0] = 4;
	101	DPRINTF("SD command failed\n");
	102	} else if (s->cmd == 58) {
	103	/* CMD58 returns R3 response (OCR) */
	104	DPRINTF("Returned OCR\n");
	105	s->arglen = 5;
	106	s->response[0] = 1;
	107	memcpy(&s->response[1], longresp, 4);
	108	} else if (s->arglen != 4) {
	109	BADF("Unexpected response to cmd %d\n", s->cmd);
	110	/* Illegal command is about as near as we can get. */
	111	s->arglen = 1;
	112	s->response[0] = 4;
	113	} else {
	114	/* All other commands return status. */
	115	uint32_t cardstatus;
	116	uint16_t status;
	117	/* CMD13 returns a 2-byte statuse work. Other commands
	118	only return the first byte. */
	119	s->arglen = (s->cmd == 13) ? 2 : 1;
	120	cardstatus = (longresp[0] << 24) \| (longresp[1] << 16)
	121	\| (longresp[2] << 8) \| longresp[3];
	122	status = 0;
	123	if (((cardstatus >> 9) & 0xf) < 4)
	124	status \|= SSI_SDR_IDLE;
	125	if (cardstatus & ERASE_RESET)
	126	status \|= SSI_SDR_ERASE_RESET;
	127	if (cardstatus & ILLEGAL_COMMAND)
	128	status \|= SSI_SDR_ILLEGAL_COMMAND;
	129	if (cardstatus & COM_CRC_ERROR)
	130	status \|= SSI_SDR_COM_CRC_ERROR;
	131	if (cardstatus & ERASE_SEQ_ERROR)
	132	status \|= SSI_SDR_ERASE_SEQ_ERROR;
	133	if (cardstatus & ADDRESS_ERROR)
	134	status \|= SSI_SDR_ADDRESS_ERROR;
	135	if (cardstatus & CARD_IS_LOCKED)
	136	status \|= SSI_SDR_LOCKED;
	137	if (cardstatus & (LOCK_UNLOCK_FAILED \| WP_ERASE_SKIP))
	138	status \|= SSI_SDR_WP_ERASE;
	139	if (cardstatus & SD_ERROR)
	140	status \|= SSI_SDR_ERROR;
	141	if (cardstatus & CC_ERROR)
	142	status \|= SSI_SDR_CC_ERROR;
	143	if (cardstatus & CARD_ECC_FAILED)
	144	status \|= SSI_SDR_ECC_FAILED;
	145	if (cardstatus & WP_VIOLATION)
	146	status \|= SSI_SDR_WP_VIOLATION;
	147	if (cardstatus & ERASE_PARAM)
	148	status \|= SSI_SDR_ERASE_PARAM;
	149	if (cardstatus & (OUT_OF_RANGE \| CID_CSD_OVERWRITE))
	150	status \|= SSI_SDR_OUT_OF_RANGE;
	151	/* ??? Don't know what Parameter Error really means, so
	152	assume it's set if the second byte is nonzero. */
	153	if (status & 0xff)
	154	status \|= SSI_SDR_PARAMETER_ERROR;
155	s->response[0] = status >> 8;
156	s->response[1] = status;
157	DPRINTF("Card status 0x%02x\n", status);
158	}
159	s->mode = SSI_SD_RESPONSE;
160	s->response_pos = 0;
161	} else {
162	s->cmdarg[s->arglen++] = val;
163	}
164	return 0xff;
165	case SSI_SD_RESPONSE:
166	if (s->stopping) {
167	s->stopping = 0;
168	return 0xff;
169	}
170	if (s->response_pos < s->arglen) {
171	DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
172	return s->response[s->response_pos++];
173	}
174	if (sd_data_ready(s->sd)) {
175	DPRINTF("Data read\n");
176	s->mode = SSI_SD_DATA_START;
177	} else {
178	DPRINTF("End of command\n");
179	s->mode = SSI_SD_CMD;
180	}
181	return 0xff;
182	case SSI_SD_DATA_START:
183	DPRINTF("Start read block\n");
184	s->mode = SSI_SD_DATA_READ;
185	return 0xfe;
186	case SSI_SD_DATA_READ:
187	val = sd_read_data(s->sd);
188	if (!sd_data_ready(s->sd)) {
189	DPRINTF("Data read end\n");
190	s->mode = SSI_SD_CMD;
191	}
192	return val;
193	}
194	/* Should never happen. */
195	return 0xff;
196	}
197
23e39294 PB	198	static void ssi_sd_save(QEMUFile f, void opaque)
	199	{
	200	ssi_sd_state s = (ssi_sd_state )opaque;
	201	int i;
	202
	203	qemu_put_be32(f, s->mode);
	204	qemu_put_be32(f, s->cmd);
	205	for (i = 0; i < 4; i++)
	206	qemu_put_be32(f, s->cmdarg[i]);
	207	for (i = 0; i < 5; i++)
	208	qemu_put_be32(f, s->response[i]);
	209	qemu_put_be32(f, s->arglen);
	210	qemu_put_be32(f, s->response_pos);
	211	qemu_put_be32(f, s->stopping);
	212	}
	213
	214	static int ssi_sd_load(QEMUFile f, void opaque, int version_id)
	215	{
	216	ssi_sd_state s = (ssi_sd_state )opaque;
	217	int i;
	218
	219	if (version_id != 1)
	220	return -EINVAL;
	221
	222	s->mode = qemu_get_be32(f);
	223	s->cmd = qemu_get_be32(f);
	224	for (i = 0; i < 4; i++)
	225	s->cmdarg[i] = qemu_get_be32(f);
	226	for (i = 0; i < 5; i++)
	227	s->response[i] = qemu_get_be32(f);
	228	s->arglen = qemu_get_be32(f);
	229	s->response_pos = qemu_get_be32(f);
	230	s->stopping = qemu_get_be32(f);
	231
	232	return 0;
	233	}
	234
81a322d4	235	static int ssi_sd_init(SSISlave *dev)
775616c3	236	{
5493e33f	237	ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);
13839974	238	DriveInfo *dinfo;
775616c3	239
775616c3	240	s->mode = SSI_SD_CMD;
13839974 MA	241	dinfo = drive_get_next(IF_SD);
13839974 MA	242	s->sd = sd_init(dinfo ? dinfo->bdrv : NULL, 1);
0be71e32	243	register_savevm(&dev->qdev, "ssi_sd", -1, 1, ssi_sd_save, ssi_sd_load, s);
81a322d4	244	return 0;
775616c3	245	}
5493e33f PB	246
5493e33f PB	247	static SSISlaveInfo ssi_sd_info = {
074f2fff GH	248	.qdev.name = "ssi-sd",
074f2fff GH	249	.qdev.size = sizeof(ssi_sd_state),
5493e33f PB	250	.init = ssi_sd_init,
	251	.transfer = ssi_sd_transfer
	252	};
	253
	254	static void ssi_sd_register_devices(void)
	255	{
074f2fff	256	ssi_register_slave(&ssi_sd_info);
5493e33f PB	257	}
	258
	259	device_init(ssi_sd_register_devices)