hw/pflash_cfi01.c

   1 /*
   2  *  CFI parallel flash with Intel command set emulation
   3  *
   4  *  Copyright (c) 2006 Thorsten Zitterell
   5  *  Copyright (c) 2005 Jocelyn Mayer
   6  *
   7  * This library is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU Lesser General Public
   9  * License as published by the Free Software Foundation; either
  10  * version 2 of the License, or (at your option) any later version.
  11  *
  12  * This library is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * Lesser General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU Lesser General Public
  18  * License along with this library; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 /*
  23  * For now, this code can emulate flashes of 1, 2 or 4 bytes width.
  24  * Supported commands/modes are:
  25  * - flash read
  26  * - flash write
  27  * - flash ID read
  28  * - sector erase
  29  * - CFI queries
  30  *
  31  * It does not support timings
  32  * It does not support flash interleaving
  33  * It does not implement software data protection as found in many real chips
  34  * It does not implement erase suspend/resume commands
  35  * It does not implement multiple sectors erase
  36  *
  37  * It does not implement much more ...
  38  */
  39
  40 #include "hw.h"
  41 #include "flash.h"
  42 #include "block.h"
  43 #include "qemu-timer.h"
  44
  45 #define PFLASH_BUG(fmt, args...) \
  46 do { \
  47     printf("PFLASH: Possible BUG - " fmt, ##args); \
  48     exit(1); \
  49 } while(0)
  50
  51 /* #define PFLASH_DEBUG */
  52 #ifdef PFLASH_DEBUG
  53 #define DPRINTF(fmt, args...)                      \
  54 do {                                               \
  55         printf("PFLASH: " fmt , ##args);           \
  56 } while (0)
  57 #else
  58 #define DPRINTF(fmt, args...) do { } while (0)
  59 #endif
  60
  61 struct pflash_t {
  62     BlockDriverState *bs;
  63     target_ulong base;
  64     target_ulong sector_len;
  65     target_ulong total_len;
  66     int width;
  67     int wcycle; /* if 0, the flash is read normally */
  68     int bypass;
  69     int ro;
  70     uint8_t cmd;
  71     uint8_t status;
  72     uint16_t ident[4];
  73     uint8_t cfi_len;
  74     uint8_t cfi_table[0x52];
  75     target_ulong counter;
  76     QEMUTimer *timer;
  77     ram_addr_t off;
  78     int fl_mem;
  79     void *storage;
  80 };
  81
  82 static void pflash_timer (void *opaque)
  83 {
  84     pflash_t *pfl = opaque;
  85
  86     DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
  87     /* Reset flash */
  88     pfl->status ^= 0x80;
  89     if (pfl->bypass) {
  90         pfl->wcycle = 2;
  91     } else {
  92         cpu_register_physical_memory(pfl->base, pfl->total_len,
  93                         pfl->off | IO_MEM_ROMD | pfl->fl_mem);
  94         pfl->wcycle = 0;
  95     }
  96     pfl->cmd = 0;
  97 }
  98
  99 static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
 100 {
 101     target_ulong boff;
 102     uint32_t ret;
 103     uint8_t *p;
 104
 105     ret = -1;
 106     offset -= pfl->base;
 107     boff = offset & 0xFF; /* why this here ?? */
 108
 109     if (pfl->width == 2)
 110         boff = boff >> 1;
 111     else if (pfl->width == 4)
 112         boff = boff >> 2;
 113
 114     DPRINTF("%s: reading offset %08x under cmd %02x\n",
 115                     __func__, boff, pfl->cmd);
 116
 117     switch (pfl->cmd) {
 118     case 0x00:
 119         /* Flash area read */
 120         p = pfl->storage;
 121         switch (width) {
 122         case 1:
 123             ret = p[offset];
 124             DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
 125             break;
 126         case 2:
 127 #if defined(TARGET_WORDS_BIGENDIAN)
 128             ret = p[offset] << 8;
 129             ret |= p[offset + 1];
 130 #else
 131             ret = p[offset];
 132             ret |= p[offset + 1] << 8;
 133 #endif
 134             DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
 135             break;
 136         case 4:
 137 #if defined(TARGET_WORDS_BIGENDIAN)
 138             ret = p[offset] << 24;
 139             ret |= p[offset + 1] << 16;
 140             ret |= p[offset + 2] << 8;
 141             ret |= p[offset + 3];
 142 #else
 143             ret = p[offset];
 144             ret |= p[offset + 1] << 8;
 145             ret |= p[offset + 1] << 8;
 146             ret |= p[offset + 2] << 16;
 147             ret |= p[offset + 3] << 24;
 148 #endif
 149             DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
 150             break;
 151         default:
 152             DPRINTF("BUG in %s\n", __func__);
 153         }
 154
 155         break;
 156     case 0x20: /* Block erase */
 157     case 0x50: /* Clear status register */
 158     case 0x60: /* Block /un)lock */
 159     case 0x70: /* Status Register */
 160     case 0xe8: /* Write block */
 161         /* Status register read */
 162         ret = pfl->status;
 163         DPRINTF("%s: status %x\n", __func__, ret);
 164         break;
 165     case 0x98: /* Query mode */
 166         if (boff > pfl->cfi_len)
 167             ret = 0;
 168         else
 169             ret = pfl->cfi_table[boff];
 170         break;
 171     default:
 172         /* This should never happen : reset state & treat it as a read */
 173         DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
 174         pfl->wcycle = 0;
 175         pfl->cmd = 0;
 176     }
 177     return ret;
 178 }
 179
 180 /* update flash content on disk */
 181 static void pflash_update(pflash_t *pfl, int offset,
 182                           int size)
 183 {
 184     int offset_end;
 185     if (pfl->bs) {
 186         offset_end = offset + size;
 187         /* round to sectors */
 188         offset = offset >> 9;
 189         offset_end = (offset_end + 511) >> 9;
 190         bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
 191                    offset_end - offset);
 192     }
 193 }
 194
 195 static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
 196                           int width)
 197 {
 198     target_ulong boff;
 199     uint8_t *p;
 200     uint8_t cmd;
 201
 202     /* WARNING: when the memory area is in ROMD mode, the offset is a
 203        ram offset, not a physical address */
 204     cmd = value;
 205
 206     if (pfl->wcycle == 0)
 207         offset -= (target_ulong)(long)pfl->storage;
 208     else
 209         offset -= pfl->base;
 210
 211     DPRINTF("%s: offset %08x %08x %d wcycle 0x%x\n",
 212                     __func__, offset, value, width, pfl->wcycle);
 213
 214     /* Set the device in I/O access mode */
 215     cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
 216     boff = offset & (pfl->sector_len - 1);
 217
 218     if (pfl->width == 2)
 219         boff = boff >> 1;
 220     else if (pfl->width == 4)
 221         boff = boff >> 2;
 222
 223     switch (pfl->wcycle) {
 224     case 0:
 225         /* read mode */
 226         switch (cmd) {
 227         case 0x00: /* ??? */
 228             goto reset_flash;
 229         case 0x20: /* Block erase */
 230             p = pfl->storage;
 231             offset &= ~(pfl->sector_len - 1);
 232
 233             DPRINTF("%s: block erase at 0x%x bytes 0x%x\n", __func__,
 234                             offset, pfl->sector_len);
 235
 236             memset(p + offset, 0xff, pfl->sector_len);
 237             pflash_update(pfl, offset, pfl->sector_len);
 238             pfl->status |= 0x80; /* Ready! */
 239             break;
 240         case 0x50: /* Clear status bits */
 241             DPRINTF("%s: Clear status bits\n", __func__);
 242             pfl->status = 0x0;
 243             goto reset_flash;
 244         case 0x60: /* Block (un)lock */
 245             DPRINTF("%s: Block unlock\n", __func__);
 246             break;
 247         case 0x70: /* Status Register */
 248             DPRINTF("%s: Read status register\n", __func__);
 249             pfl->cmd = cmd;
 250             return;
 251         case 0x98: /* CFI query */
 252             DPRINTF("%s: CFI query\n", __func__);
 253             break;
 254         case 0xe8: /* Write to buffer */
 255             DPRINTF("%s: Write to buffer\n", __func__);
 256             pfl->status |= 0x80; /* Ready! */
 257             break;
 258         case 0xff: /* Read array mode */
 259             DPRINTF("%s: Read array mode\n", __func__);
 260             goto reset_flash;
 261         default:
 262             goto error_flash;
 263         }
 264         pfl->wcycle++;
 265         pfl->cmd = cmd;
 266         return;
 267     case 1:
 268         switch (pfl->cmd) {
 269         case 0x20: /* Block erase */
 270         case 0x28:
 271             if (cmd == 0xd0) { /* confirm */
 272                 pfl->wcycle = 1;
 273                 pfl->status |= 0x80;
 274             } if (cmd == 0xff) { /* read array mode */
 275                 goto reset_flash;
 276             } else
 277                 goto error_flash;
 278
 279             break;
 280         case 0xe8:
 281             DPRINTF("%s: block write of 0x%x bytes\n", __func__, cmd);
 282             pfl->counter = cmd;
 283             pfl->wcycle++;
 284             break;
 285         case 0x60:
 286             if (cmd == 0xd0) {
 287                 pfl->wcycle = 0;
 288                 pfl->status |= 0x80;
 289             } else if (cmd == 0x01) {
 290                 pfl->wcycle = 0;
 291                 pfl->status |= 0x80;
 292             } else if (cmd == 0xff) {
 293                 goto reset_flash;
 294             } else {
 295                 DPRINTF("%s: Unknown (un)locking command\n", __func__);
 296                 goto reset_flash;
 297             }
 298             break;
 299         case 0x98:
 300             if (cmd == 0xff) {
 301                 goto reset_flash;
 302             } else {
 303                 DPRINTF("%s: leaving query mode\n", __func__);
 304             }
 305             break;
 306         default:
 307             goto error_flash;
 308         }
 309         return;
 310     case 2:
 311         switch (pfl->cmd) {
 312         case 0xe8: /* Block write */
 313             p = pfl->storage;
 314             DPRINTF("%s: block write offset 0x%x value 0x%x counter 0x%x\n",
 315                             __func__, offset, value, pfl->counter);
 316             switch (width) {
 317             case 1:
 318                 p[offset] = value;
 319                 pflash_update(pfl, offset, 1);
 320                 break;
 321             case 2:
 322 #if defined(TARGET_WORDS_BIGENDIAN)
 323                 p[offset] = value >> 8;
 324                 p[offset + 1] = value;
 325 #else
 326                 p[offset] = value;
 327                 p[offset + 1] = value >> 8;
 328 #endif
 329                 pflash_update(pfl, offset, 2);
 330                 break;
 331             case 4:
 332 #if defined(TARGET_WORDS_BIGENDIAN)
 333                 p[offset] = value >> 24;
 334                 p[offset + 1] = value >> 16;
 335                 p[offset + 2] = value >> 8;
 336                 p[offset + 3] = value;
 337 #else
 338                 p[offset] = value;
 339                 p[offset + 1] = value >> 8;
 340                 p[offset + 2] = value >> 16;
 341                 p[offset + 3] = value >> 24;
 342 #endif
 343                 pflash_update(pfl, offset, 4);
 344                 break;
 345             }
 346
 347             pfl->status |= 0x80;
 348
 349             if (!pfl->counter) {
 350                 DPRINTF("%s: block write finished\n", __func__);
 351                 pfl->wcycle++;
 352             }
 353
 354             pfl->counter--;
 355             break;
 356         default:
 357             goto error_flash;
 358         }
 359         return;
 360     case 3: /* Confirm mode */
 361         switch (pfl->cmd) {
 362         case 0xe8: /* Block write */
 363             if (cmd == 0xd0) {
 364                 pfl->wcycle = 0;
 365                 pfl->status |= 0x80;
 366             } else {
 367                 DPRINTF("%s: unknown command for \"write block\"\n", __func__);
 368                 PFLASH_BUG("Write block confirm");
 369                 goto reset_flash;
 370             }
 371             break;
 372         default:
 373             goto error_flash;
 374         }
 375         return;
 376     default:
 377         /* Should never happen */
 378         DPRINTF("%s: invalid write state\n",  __func__);
 379         goto reset_flash;
 380     }
 381     return;
 382
 383  error_flash:
 384     printf("%s: Unimplemented flash cmd sequence "
 385                     "(offset 0x%x, wcycle 0x%x cmd 0x%x value 0x%x\n",
 386                     __func__, offset, pfl->wcycle, pfl->cmd, value);
 387
 388  reset_flash:
 389     cpu_register_physical_memory(pfl->base, pfl->total_len,
 390                     pfl->off | IO_MEM_ROMD | pfl->fl_mem);
 391
 392     pfl->bypass = 0;
 393     pfl->wcycle = 0;
 394     pfl->cmd = 0;
 395     return;
 396 }
 397
 398
 399 static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
 400 {
 401     return pflash_read(opaque, addr, 1);
 402 }
 403
 404 static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
 405 {
 406     pflash_t *pfl = opaque;
 407
 408     return pflash_read(pfl, addr, 2);
 409 }
 410
 411 static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
 412 {
 413     pflash_t *pfl = opaque;
 414
 415     return pflash_read(pfl, addr, 4);
 416 }
 417
 418 static void pflash_writeb (void *opaque, target_phys_addr_t addr,
 419                            uint32_t value)
 420 {
 421     pflash_write(opaque, addr, value, 1);
 422 }
 423
 424 static void pflash_writew (void *opaque, target_phys_addr_t addr,
 425                            uint32_t value)
 426 {
 427     pflash_t *pfl = opaque;
 428
 429     pflash_write(pfl, addr, value, 2);
 430 }
 431
 432 static void pflash_writel (void *opaque, target_phys_addr_t addr,
 433                            uint32_t value)
 434 {
 435     pflash_t *pfl = opaque;
 436
 437     pflash_write(pfl, addr, value, 4);
 438 }
 439
 440 static CPUWriteMemoryFunc *pflash_write_ops[] = {
 441     &pflash_writeb,
 442     &pflash_writew,
 443     &pflash_writel,
 444 };
 445
 446 static CPUReadMemoryFunc *pflash_read_ops[] = {
 447     &pflash_readb,
 448     &pflash_readw,
 449     &pflash_readl,
 450 };
 451
 452 /* Count trailing zeroes of a 32 bits quantity */
 453 static int ctz32 (uint32_t n)
 454 {
 455     int ret;
 456
 457     ret = 0;
 458     if (!(n & 0xFFFF)) {
 459         ret += 16;
 460         n = n >> 16;
 461     }
 462     if (!(n & 0xFF)) {
 463         ret += 8;
 464         n = n >> 8;
 465     }
 466     if (!(n & 0xF)) {
 467         ret += 4;
 468         n = n >> 4;
 469     }
 470     if (!(n & 0x3)) {
 471         ret += 2;
 472         n = n >> 2;
 473     }
 474     if (!(n & 0x1)) {
 475         ret++;
 476         n = n >> 1;
 477     }
 478 #if 0 /* This is not necessary as n is never 0 */
 479     if (!n)
 480         ret++;
 481 #endif
 482
 483     return ret;
 484 }
 485
 486 pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
 487                                 BlockDriverState *bs, target_ulong sector_len,
 488                                 int nb_blocs, int width,
 489                                 uint16_t id0, uint16_t id1,
 490                                 uint16_t id2, uint16_t id3)
 491 {
 492     pflash_t *pfl;
 493     target_long total_len;
 494
 495     total_len = sector_len * nb_blocs;
 496
 497     /* XXX: to be fixed */
 498     if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
 499         total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
 500         return NULL;
 501
 502     pfl = qemu_mallocz(sizeof(pflash_t));
 503
 504     if (pfl == NULL)
 505         return NULL;
 506     pfl->storage = phys_ram_base + off;
 507     pfl->fl_mem = cpu_register_io_memory(0,
 508                     pflash_read_ops, pflash_write_ops, pfl);
 509     pfl->off = off;
 510     cpu_register_physical_memory(base, total_len,
 511                     off | pfl->fl_mem | IO_MEM_ROMD);
 512
 513     pfl->bs = bs;
 514     if (pfl->bs) {
 515         /* read the initial flash content */
 516         bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
 517     }
 518 #if 0 /* XXX: there should be a bit to set up read-only,
 519        *      the same way the hardware does (with WP pin).
 520        */
 521     pfl->ro = 1;
 522 #else
 523     pfl->ro = 0;
 524 #endif
 525     pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
 526     pfl->base = base;
 527     pfl->sector_len = sector_len;
 528     pfl->total_len = total_len;
 529     pfl->width = width;
 530     pfl->wcycle = 0;
 531     pfl->cmd = 0;
 532     pfl->status = 0;
 533     pfl->ident[0] = id0;
 534     pfl->ident[1] = id1;
 535     pfl->ident[2] = id2;
 536     pfl->ident[3] = id3;
 537     /* Hardcoded CFI table */
 538     pfl->cfi_len = 0x52;
 539     /* Standard "QRY" string */
 540     pfl->cfi_table[0x10] = 'Q';
 541     pfl->cfi_table[0x11] = 'R';
 542     pfl->cfi_table[0x12] = 'Y';
 543     /* Command set (Intel) */
 544     pfl->cfi_table[0x13] = 0x01;
 545     pfl->cfi_table[0x14] = 0x00;
 546     /* Primary extended table address (none) */
 547     pfl->cfi_table[0x15] = 0x31;
 548     pfl->cfi_table[0x16] = 0x00;
 549     /* Alternate command set (none) */
 550     pfl->cfi_table[0x17] = 0x00;
 551     pfl->cfi_table[0x18] = 0x00;
 552     /* Alternate extended table (none) */
 553     pfl->cfi_table[0x19] = 0x00;
 554     pfl->cfi_table[0x1A] = 0x00;
 555     /* Vcc min */
 556     pfl->cfi_table[0x1B] = 0x45;
 557     /* Vcc max */
 558     pfl->cfi_table[0x1C] = 0x55;
 559     /* Vpp min (no Vpp pin) */
 560     pfl->cfi_table[0x1D] = 0x00;
 561     /* Vpp max (no Vpp pin) */
 562     pfl->cfi_table[0x1E] = 0x00;
 563     /* Reserved */
 564     pfl->cfi_table[0x1F] = 0x07;
 565     /* Timeout for min size buffer write */
 566     pfl->cfi_table[0x20] = 0x07;
 567     /* Typical timeout for block erase */
 568     pfl->cfi_table[0x21] = 0x0a;
 569     /* Typical timeout for full chip erase (4096 ms) */
 570     pfl->cfi_table[0x22] = 0x00;
 571     /* Reserved */
 572     pfl->cfi_table[0x23] = 0x04;
 573     /* Max timeout for buffer write */
 574     pfl->cfi_table[0x24] = 0x04;
 575     /* Max timeout for block erase */
 576     pfl->cfi_table[0x25] = 0x04;
 577     /* Max timeout for chip erase */
 578     pfl->cfi_table[0x26] = 0x00;
 579     /* Device size */
 580     pfl->cfi_table[0x27] = ctz32(total_len); // + 1;
 581     /* Flash device interface (8 & 16 bits) */
 582     pfl->cfi_table[0x28] = 0x02;
 583     pfl->cfi_table[0x29] = 0x00;
 584     /* Max number of bytes in multi-bytes write */
 585     pfl->cfi_table[0x2A] = 0x04;
 586     pfl->cfi_table[0x2B] = 0x00;
 587     /* Number of erase block regions (uniform) */
 588     pfl->cfi_table[0x2C] = 0x01;
 589     /* Erase block region 1 */
 590     pfl->cfi_table[0x2D] = nb_blocs - 1;
 591     pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
 592     pfl->cfi_table[0x2F] = sector_len >> 8;
 593     pfl->cfi_table[0x30] = sector_len >> 16;
 594
 595     /* Extended */
 596     pfl->cfi_table[0x31] = 'P';
 597     pfl->cfi_table[0x32] = 'R';
 598     pfl->cfi_table[0x33] = 'I';
 599
 600     pfl->cfi_table[0x34] = '1';
 601     pfl->cfi_table[0x35] = '1';
 602
 603     pfl->cfi_table[0x36] = 0x00;
 604     pfl->cfi_table[0x37] = 0x00;
 605     pfl->cfi_table[0x38] = 0x00;
 606     pfl->cfi_table[0x39] = 0x00;
 607
 608     pfl->cfi_table[0x3a] = 0x00;
 609
 610     pfl->cfi_table[0x3b] = 0x00;
 611     pfl->cfi_table[0x3c] = 0x00;
 612
 613     return pfl;
 614 }