echo >> config.log
echo "#" >> config.log
+# Save the configure command line for later reuse.
+cat <<EOD >config.status
+#!/bin/sh
+# Generated by configure.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+EOD
+printf "exec" >>config.status
+printf " '%s'" "$0" "$@" >>config.status
+echo >>config.status
+chmod +x config.status
+
error_exit() {
echo
echo "ERROR: $1"
# default parameters
source_path=`dirname "$0"`
cpu=""
+iasl="iasl"
interp_prefix="/usr/gnemul/qemu-%M"
static="no"
cross_prefix=""
gtkabi="2.0"
tpm="no"
libssh2=""
+vhdx=""
# parse CC options first
for opt do
;;
--cxx=*) CXX="$optarg"
;;
+ --iasl=*) iasl="$optarg"
+ ;;
--source-path=*) source_path="$optarg"
;;
--cpu=*) cpu="$optarg"
pkg_config=query_pkg_config
sdl_config="${SDL_CONFIG-${cross_prefix}sdl-config}"
+# If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
+ARFLAGS="${ARFLAGS-rv}"
+
# default flags for all hosts
QEMU_CFLAGS="-fno-strict-aliasing $QEMU_CFLAGS"
QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
: ${make=${MAKE-make}}
: ${install=${INSTALL-install}}
-: ${python=${PYTHON-python -B}}
+: ${python=${PYTHON-python}}
: ${smbd=${SMBD-/usr/sbin/smbd}}
# Default objcc to clang if available, otherwise use CC
;;
--enable-libssh2) libssh2="yes"
;;
+ --enable-vhdx) vhdx="yes"
+ ;;
+ --disable-vhdx) vhdx="no"
+ ;;
*) echo "ERROR: unknown option $opt"; show_help="yes"
;;
esac
echo " --source-path=PATH path of source code [$source_path]"
echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
echo " --cc=CC use C compiler CC [$cc]"
+echo " --iasl=IASL use ACPI compiler IASL [$iasl]"
echo " --host-cc=CC use C compiler CC [$host_cc] for code run at"
echo " build time"
echo " --cxx=CXX use C++ compiler CXX [$cxx]"
echo " --enable-tpm enable TPM support"
echo " --disable-libssh2 disable ssh block device support"
echo " --enable-libssh2 enable ssh block device support"
+echo " --disable-vhdx disables support for the Microsoft VHDX image format"
+echo " --enable-vhdx enable support for the Microsoft VHDX image format"
echo ""
echo "NOTE: The object files are built at the place where configure is launched"
exit 1
"Use --python=/path/to/python to specify a supported Python."
fi
+# The -B switch was added in Python 2.6.
+# If it is supplied, compiled files are not written.
+# Use it for Python versions which support it.
+if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then
+ python="$python -B"
+fi
+
if test -z "${target_list+xxx}" ; then
target_list="$default_target_list"
else
"configure was not able to find it"
}
-if test -z "$cross_prefix" ; then
-
# ---
# big/little endian test
cat > $TMPC << EOF
-#include <inttypes.h>
-int main(void) {
- volatile uint32_t i=0x01234567;
- return (*((uint8_t*)(&i))) == 0x67;
+short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
+short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
+extern int foo(short *, short *);
+int main(int argc, char *argv[]) {
+ return foo(big_endian, little_endian);
}
EOF
-if compile_prog "" "" ; then
-$TMPE && bigendian="yes"
-else
-echo big/little test failed
-fi
-
-else
-
-# if cross compiling, cannot launch a program, so make a static guess
-case "$cpu" in
- arm)
- # ARM can be either way; ask the compiler which one we are
- if check_define __ARMEB__; then
- bigendian=yes
+if compile_object ; then
+ if grep -q BiGeNdIaN $TMPO ; then
+ bigendian="yes"
+ elif grep -q LiTtLeEnDiAn $TMPO ; then
+ bigendian="no"
+ else
+ echo big/little test failed
fi
- ;;
- hppa|m68k|mips|mips64|ppc|ppc64|s390|s390x|sparc|sparc64)
- bigendian=yes
- ;;
-esac
-
+else
+ echo big/little test failed
fi
##########################################
fi
fi
+if test "$vhdx" = "yes" ; then
+ if test "$uuid" = "no" ; then
+ error_exit "uuid required for VHDX support"
+ fi
+elif test "$vhdx" != "no" ; then
+ if test "$uuid" = "yes" ; then
+ vhdx=yes
+ else
+ vhdx=no
+ fi
+fi
+
##########################################
# xfsctl() probe, used for raw-posix
if test "$xfs" != "no" ; then
echo "Host C compiler $host_cc"
echo "C++ compiler $cxx"
echo "Objective-C compiler $objcc"
+echo "ARFLAGS $ARFLAGS"
echo "CFLAGS $CFLAGS"
echo "QEMU_CFLAGS $QEMU_CFLAGS"
echo "LDFLAGS $LDFLAGS"
echo "libssh2 support $libssh2"
echo "TPM passthrough $tpm_passthrough"
echo "QOM debugging $qom_cast_debug"
+echo "vhdx $vhdx"
if test "$sdl_too_old" = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
echo "# Automatically generated by configure - do not modify" > $config_host_mak
-printf "# Configured with:" >> $config_host_mak
-printf " '%s'" "$0" "$@" >> $config_host_mak
echo >> $config_host_mak
echo all: >> $config_host_mak
echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak
fi
+if test "$vhdx" = "yes" ; then
+ echo "CONFIG_VHDX=y" >> $config_host_mak
+fi
+
# USB host support
if test "$libusb" = "yes"; then
echo "HOST_USB=libusb legacy" >> $config_host_mak
fi
echo "PYTHON=$python" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
+if $iasl -h > /dev/null 2>&1; then
+ echo "IASL=$iasl" >> $config_host_mak
+fi
echo "CC_I386=$cc_i386" >> $config_host_mak
echo "HOST_CC=$host_cc" >> $config_host_mak
echo "CXX=$cxx" >> $config_host_mak
echo "OBJCC=$objcc" >> $config_host_mak
echo "AR=$ar" >> $config_host_mak
+echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
echo "AS=$as" >> $config_host_mak
echo "CPP=$cpp" >> $config_host_mak
echo "OBJCOPY=$objcopy" >> $config_host_mak
# build tree in object directory in case the source is not in the current directory
DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests"
+DIRS="$DIRS fsdev"
DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios roms/vgabios"
DIRS="$DIRS qapi-generated"
echo "BCC=bcc" >> $config_mak
echo "CPP=$cpp" >> $config_mak
echo "OBJCOPY=objcopy" >> $config_mak
- echo "IASL=iasl" >> $config_mak
+ echo "IASL=$iasl" >> $config_mak
echo "LD=$ld" >> $config_mak
done
projects / qemu.git / blobdiff